Chapter 1 of 1 · 25 min read

Mensuration — Complete Guide

Table of Contents

  1. Introduction to the Topic
  2. 2D Mensuration — Perimeter and Area Formulas
  3. 3D Mensuration — Surface Area and Volume Formulas
  4. Relationships Between Solids (Cones, Cylinders, Spheres)
  5. Combined/Composite Figure Problems
  6. Common Shortcuts and Tricks
  7. Common Mistakes to Avoid
  8. Solved Examples (25 fully worked problems)
  9. Practice Question Bank (50 questions)
  10. Answer Key with Quick Solutions

1. Introduction to the Topic

Mensuration is a formula-heavy but highly scoring chapter — nearly every question is a direct or near-direct application of a memorized formula. SSC and RRB exams typically include 3–5 mensuration questions, spanning both 2D shapes (squares, rectangles, triangles, circles, trapeziums) and 3D solids (cubes, cuboids, cylinders, cones, spheres, hemispheres, prisms, frustums). Success here depends almost entirely on memorizing every formula precisely and practicing unit consistency.


2. 2D Mensuration — Perimeter and Area Formulas

Square (side a): - Perimeter = 4a - Area = a² - Diagonal = a√2

Rectangle (length l, breadth b): - Perimeter = 2(l+b) - Area = l×b - Diagonal = √(l²+b²)

Triangle (base b, height h): - Area = ½ × b × h - Heron’s formula: Area = √[s(s−a)(s−b)(s−c)], s = (a+b+c)/2 - Equilateral triangle (side a): Area = (√3/4)a²; Height = (√3/2)a - Right triangle: Area = ½ × (product of legs)

Parallelogram (base b, height h): - Area = b × h - Perimeter = 2(sum of adjacent sides)

Rhombus (diagonals d₁, d₂): - Area = ½ × d₁ × d₂ - Perimeter = 4 × side (side = ½√(d₁²+d₂²))

Trapezium (parallel sides a, b; height h): - Area = ½ × (a+b) × h

Circle (radius r): - Circumference = 2πr - Area = πr² - Diameter = 2r

Semicircle (radius r): - Perimeter = πr + 2r - Area = ½πr²

Sector of a circle (radius r, angle θ): - Arc length = (θ/360°) × 2πr - Area = (θ/360°) × πr²

Ring/Annulus (outer radius R, inner radius r): - Area = π(R² − r²)

Regular Polygon (n sides, each of length a): - Area = (n×a²)/(4 tan(180°/n)) - Regular hexagon (side a): Area = (3√3/2)a²


3. 3D Mensuration — Surface Area and Volume Formulas

Figure: A frustum of a cone — a cone with its tip cut off.
Figure: The three standard curved solids — cylinder, cone, and sphere.

Cube (side a): - Volume = a³ - Total Surface Area (TSA) = 6a² - Lateral/Curved Surface Area (LSA) = 4a² - Diagonal = a√3

Cuboid (length l, breadth b, height h): - Volume = l×b×h - TSA = 2(lb+bh+hl) - LSA = 2h(l+b) - Diagonal = √(l²+b²+h²)

Cylinder (radius r, height h): - Volume = πr²h - Curved Surface Area (CSA) = 2πrh - TSA = 2πr(h+r)

Hollow Cylinder (outer radius R, inner radius r, height h): - Volume = πh(R²−r²) - CSA = 2πh(R+r) - TSA = 2πh(R+r) + 2π(R²−r²)

Cone (radius r, height h, slant height l): - Slant height l = √(r²+h²) - Volume = ⅓πr²h - CSA = πrl - TSA = πrl + πr² = πr(l+r)

Sphere (radius r): - Volume = (4/3)πr³ - Surface Area = 4πr²

Hemisphere (radius r): - Volume = (2/3)πr³ - Curved Surface Area = 2πr² - Total Surface Area = 3πr²

Frustum of a Cone (radii R and r, height h, slant height l): - Slant height l = √[h²+(R−r)²] - Volume = (⅓)πh(R²+r²+Rr) - CSA = πl(R+r) - TSA = πl(R+r) + πR² + πr²

Prism (base area A, height h): - Volume = A × h - TSA = 2×(base area) + (perimeter of base × height)

Pyramid (base area A, height h): - Volume = (1/3) × A × h


4. Relationships Between Solids (Cones, Cylinders, Spheres)

Figure: A composite solid (cylinder + cone), as in a tent or ice-cream cone.

These relationships are frequently tested when a solid is melted and recast into another shape.

  • Volume of cone = (1/3) Volume of cylinder with the same base radius and height.
  • When a sphere is melted and recast into a cylinder/cone, equate volumes: (4/3)πr³(sphere) = πR²H(cylinder), and solve for the unknown dimension.
  • When n small spheres of radius r are melted into 1 large sphere of radius R: n × (4/3)πr³ = (4/3)πR³ ⇒ nr³=R³
  • When a solid cylinder is melted to form a cone of the same radius: Height of cone = 3 × Height of cylinder (for equal volumes and equal radius).
  • Water displacement problems: Volume of water displaced = Volume of the submerged solid.

5. Combined/Composite Figure Problems

Common composite shapes tested: - Cylinder with hemispherical ends (capsule shape): Total volume = Volume of cylinder + 2×Volume of hemisphere; Total surface area = CSA of cylinder + 2×CSA of hemisphere. - Cone mounted on a cylinder (like an ice-cream cone with a scoop, or a tent shape): Volume = Volume of cylinder + Volume of cone; TSA (for a tent, open at bottom) = CSA of cylinder + CSA of cone. - Hemisphere mounted on a cylinder: similarly add volumes/surface areas, being careful not to double-count the shared circular face (it’s internal, not part of the outer surface). - A cube with a hemisphere carved out: Volume = Volume of cube − Volume of hemisphere; Surface area = TSA of cube − (circle area removed) + (curved surface of hemisphere added)

Golden rule for composite solids: For volume, simply add/subtract volumes of parts. For surface area, only count the surfaces that are externally visible — shared internal faces between two joined solids are NOT part of the total surface area.


6. Common Shortcuts and Tricks

  1. Memorize π as 22/7 for radii that are multiples of 7, and 3.14 otherwise — this alone speeds up nearly every circle/sphere/cylinder question.
  2. For a square inscribed in a circle, diagonal of square = diameter of circle.
  3. For a circle inscribed in a square, diameter of circle = side of square.
  4. When a solid is recast into another shape, volumes are always equal (never surface areas) — this is the anchor equation.
  5. For composite solids, remember that shared circular faces (where two solids join) do NOT count in total surface area — only curved/external surfaces count.
  6. Ratio shortcut: if all linear dimensions of a similar solid scale by factor k, then surface area scales by k² and volume scales by k³.
  7. For a cone from a cylinder of equal base and height problems, memorize: Cylinder volume = 3 × Cone volume (same r, h).
  8. When wire is bent from one shape into another (e.g., circle to square, or square to rectangle), the perimeter/circumference stays the same (not the area).
  9. For “sphere melted into wire (cylinder of very small radius and large length)” problems, equate volumes directly: (4/3)πr³ = πr’²×L.
  10. Learn to recognize when a problem wants only the curved surface (CSA) vs the total surface area (TSA, including flat circular bases) — many marks are lost from picking the wrong one.

7. Common Mistakes to Avoid

  • Confusing CSA and TSA for cylinders and cones — TSA includes the base(s), CSA does not.
  • Forgetting that cone volume has a factor of 1/3 while cylinder does not (both use πr²h as base component).
  • Using diameter where radius is needed, or vice versa.
  • Adding surface areas of composite solids without subtracting the shared/internal circular face.
  • Forgetting units — mixing cm and m without converting (always convert to a single unit before computing).
  • Using wrong formula for slant height (l=√(r²+h²) for a cone) versus the perpendicular height h.
  • Rounding π too early in multi-step calculations, causing accumulated error — keep it as a fraction (22/7) until the final step when radius is a multiple of 7.
  • In “recast” problems, equating surface areas instead of volumes (should always be volumes, since the “material” — i.e., volume — is conserved).

8. Solved Examples (25 Fully Worked Problems)

Example 1. Find the area of a rectangle with length 15 cm and breadth 8 cm. Solution: Area = 15×8 = 120 sq cm.

Example 2. The perimeter of a square is 64 cm. Find its area. Solution: Side=64/4=16. Area=16²=256 sq cm.

Example 3. Find the area of a triangle with base 18 cm and height 10 cm. Solution: Area=½×18×10=90 sq cm.

Example 4. Find the area of a circle with radius 21 cm. Solution: Area=π×21²=(22/7)×441=1386 sq cm.

Example 5. A wire is bent to form a circle of radius 14 cm. Find the side of a square formed by bending the same wire. Solution: Circumference=2×(22/7)×14=88cm=Perimeter of square. Side=88/4=22 cm.

Example 6. Find the volume of a cube with side 7 cm. Solution: Volume=7³=343 cubic cm.

Example 7. Find the total surface area of a cuboid with dimensions 10×8×6 cm. Solution: TSA=2(10×8+8×6+6×10)=2(80+48+60)=2(188)=376 sq cm.

Example 8. A cylinder has radius 7 cm and height 10 cm. Find its volume and curved surface area. Solution: Volume=π×49×10=(22/7)×490=1540 cubic cm. CSA=2π×7×10=2×(22/7)×70=440 sq cm.

Example 9. Find the volume and curved surface area of a cone with radius 7 cm and height 24 cm. Solution: Slant height=√(49+576)=√625=25. Volume=(1/3)×(22/7)×49×24=(1/3)×1078×… let’s compute: (22/7)×49=154;154×24=3696;/3=1232 cubic cm. CSA=π×r×l=(22/7)×7×25=550 sq cm.

Example 10. Find the surface area of a sphere with radius 10.5 cm. Solution: SA=4π×10.5²=4×(22/7)×110.25=4×346.5=1386 sq cm.

Example 11. Find the volume of a hemisphere with radius 6 cm. Solution: Volume=(2/3)π×6³=(2/3)×(22/7)×216=(2/3)×679.71≈452.57 cubic cm (exact: (2/3)×(22/7)×216= (2×22×216)/(7×3)=9504/21=452.57).

Example 12. A cylindrical tank has radius 3.5 m and height 6 m. Find its capacity in litres. Solution: Volume=(22/7)×3.5²×6=(22/7)×12.25×6=(22/7)×73.5=231 cubic m. 1 cubic m=1000 litres. Capacity=231000 litres.

Example 13. Find the area of a trapezium with parallel sides 15 cm and 9 cm, and height 8 cm. Solution: Area=½×(15+9)×8=½×24×8=96 sq cm.

Example 14. Find the area of a rhombus with diagonals 24 cm and 18 cm. Solution: Area=½×24×18=216 sq cm.

Example 15. A spherical ball of radius 6 cm is melted and recast into small balls of radius 1 cm each. Find the number of small balls formed. Solution: n×1³=6³ ⇒ n=216.

Example 16. A cone has the same base radius and height as a cylinder. If the cylinder’s volume is 900 cubic cm, find the cone’s volume. Solution: Cone volume=(1/3)×Cylinder volume=900/3=300 cubic cm.

Example 17. Find the total surface area of a cone with base radius 6 cm and slant height 10 cm. Solution: TSA=πr(l+r)=π×6×16=96π ≈ 301.71 sq cm.

Example 18. A rectangular sheet of paper 22 cm × 14 cm is rolled to form a cylinder along its length (22 cm becomes the circumference). Find the radius of the base. Solution: 2πr=22 ⇒ r=22/(2π)=22/(2×22/7)=3.5 cm.

Example 19. Find the volume of a cylindrical pipe (hollow) with outer radius 10 cm, inner radius 8 cm, and length 50 cm. Solution: Volume=πh(R²−r²)=(22/7)×50×(100−64)=(22/7)×50×36=(22/7)×1800=5657.14 cubic cm.

Example 20. A right circular cone of height 24 cm and base radius 7 cm is melted and recast into a sphere. Find the radius of the sphere. Solution: Cone volume=(1/3)π×49×24=1232 (as in Ex 9, using cubic cm units, actual value=1232 cm³, consistent). Sphere volume=(4/3)πR³=1232 ⇒ (4/3)×(22/7)×R³=1232 ⇒ R³=1232×3×7/(4×22)=1232×21/88=25872/88=294 ⇒ hmm let’s recompute cleanly. (4/3)πR³=1232 R³ = 1232×3/(4π) = 3696/(4×22/7) = 3696×7/88 = 25872/88 = 294 R=∛294 ≈ 6.63 cm (Note: exact cube root isn’t a whole number here; this illustrates that not all such problems yield integers — students should verify via approximation when needed.)

Example 21. Find the area of a sector of a circle with radius 14 cm and central angle 45°. Solution: Area=(45/360)×π×196=(1/8)×(22/7)×196=(1/8)×616=77 sq cm.

Example 22. A cuboid-shaped water tank is 5 m long, 4 m wide, and 3 m deep. Find how many litres of water it can hold. Solution: Volume=5×4×3=60 cubic m=60000 litres.

Example 23. The radius of a sphere is increased by 100%. Find the percentage increase in its volume. Solution: New radius=2r. New volume=(4/3)π(2r)³=8×original volume. Increase=(8−1)×100%=700%.

Example 24. A tent is in the shape of a cylinder surmounted by a cone. The cylinder has radius 7 m and height 8 m. The cone has slant height 25 m. Find the total area of canvas required (curved surfaces only). Solution: CSA of cylinder=2π×7×8=(2×22/7×7×8)=352 sq m. Slant height 25 with radius 7: CSA of cone=πrl=(22/7)×7×25=550 sq m. Total canvas=352+550=902 sq m.

Example 25. Find the volume of a frustum with radii 8 cm and 4 cm, and height 6 cm. Solution: Volume=(1/3)πh(R²+r²+Rr)=(1/3)×(22/7)×6×(64+16+32)=(1/3)×(22/7)×6×112=(1/3)×(22×6×112)/7=(1/3)×(14784/7)=(1/3)×2112=704 cubic cm.


9. Practice Question Bank (50 Questions)

Set A — Basic 2D Shapes (Q1–Q12) 1. Find the area of a square with side 12 cm. 2. Find the perimeter of a rectangle with length 20 m and breadth 15 m. 3. Find the area of a triangle with base 24 cm and height 15 cm. 4. Find the area of a triangle with sides 9,10,17 using Heron’s formula. 5. Find the circumference and area of a circle with radius 28 cm. 6. Find the area of a semicircle with radius 7 cm. 7. Find the area of a parallelogram with base 12 cm and height 9 cm. 8. Find the area of a rhombus whose side is 13 cm and one diagonal is 10 cm (find the other diagonal first). 9. Find the area of a trapezium with parallel sides 20 cm and 12 cm, height 10 cm. 10. Find the diagonal of a rectangle with length 16 cm and breadth 12 cm. 11. Find the area of a ring with outer radius 14 cm and inner radius 7 cm. 12. Find the area of a regular hexagon with side 4 cm.

Set B — Basic 3D Shapes (Q13–Q26) 13. Find the volume and TSA of a cube with side 9 cm. 14. Find the volume of a cuboid with dimensions 12×9×6 cm. 15. Find the TSA of a cuboid with dimensions 8×5×4 cm. 16. Find the volume and CSA of a cylinder with radius 14 cm and height 20 cm. 17. Find the TSA of a cylinder with radius 7 cm and height 15 cm. 18. Find the volume of a cone with radius 6 cm and height 8 cm. 19. Find the CSA and TSA of a cone with radius 9 cm and height 12 cm. 20. Find the volume of a sphere with radius 21 cm. 21. Find the surface area of a sphere with radius 14 cm. 22. Find the volume of a hemisphere with radius 3 cm. 23. Find the TSA of a hemisphere with radius 7 cm. 24. Find the diagonal of a cube with side 5 cm. 25. Find the volume of a hollow cylinder with outer radius 5 cm, inner radius 3 cm, height 14 cm. 26. Find the volume of a frustum with radii 6 cm and 3 cm, height 8 cm.

Set C — Melting and Recasting (Q27–Q34) 27. A sphere of radius 9 cm is melted into small spheres of radius 3 cm each. Find the number formed. 28. A cylindrical block of radius 6 cm and height 15 cm is melted and recast into a cone of the same radius. Find the cone’s height. 29. A metallic sphere of radius 4.2 cm is melted and recast into a cylinder of radius 6 cm. Find the height of the cylinder. 30. A cone of height 24 cm and base radius 6 cm is melted and recast into a sphere. Find the radius of the sphere. 31. Three metal cubes of sides 3,4,5 cm are melted to form a single cube. Find its side. 32. A wire of length 176 cm is bent into a circle. Find its area. 33. A solid cylinder of radius 6 cm and height 8 cm is melted and recast into small spheres of radius 2 cm. Find the number of spheres. 34. Twelve spheres of radius 2 cm are melted to form a single sphere. Find the radius of the new sphere.

Set D — Composite Solids (Q35–Q42) 35. A cylinder of radius 7 cm and height 10 cm has a hemisphere of the same radius attached to one end. Find the total volume. 36. Find the total surface area of the solid in Q35 (cylinder + hemisphere, one flat circular face at the other end). 37. A cone of height 24 cm and radius 7 cm is placed on a cylinder of the same radius and height 10 cm. Find the total volume. 38. A capsule is in the form of a cylinder with two hemispherical ends. If the total length is 14 cm and the diameter is 5 cm, find the volume (cylindrical part length = 14 − 5 = 9 cm). 39. A cube of side 10 cm has a hemisphere of radius 3.5 cm carved out from the top face. Find the remaining volume. 40. Find the surface area of a solid formed by mounting a hemisphere of radius 3.5 cm on a cylinder of the same radius and height 10 cm (total external surface only). 41. A toy is in the shape of a cone mounted on a hemisphere of the same radius 3.5 cm. If the cone’s height is 12 cm, find the total volume of the toy. 42. A tent is cylindrical up to a height of 3 m and conical above it, with the total height 5 m and base radius 3.5 m. Find the volume of air inside the tent.

Set E — Ratio and Scaling (Q43–Q46) 43. If the radius of a sphere is doubled, find the ratio of the new surface area to the old. 44. If the side of a cube is tripled, find the ratio of the new volume to the old. 45. Two spheres have radii in ratio 2:3. Find the ratio of their volumes. 46. Two cones have equal volumes and their radii are in ratio 3:5. Find the ratio of their heights.

Set F — Applied/Word Problems (Q47–Q50) 47. A rectangular water tank 6 m × 5 m × 4.5 m is full. Water is emptied into a cylindrical tank of radius 3 m. Find the height to which water rises in the cylindrical tank. 48. Find the cost of painting the curved surface of a cylindrical pillar of radius 1.4 m and height 5 m at ₹15 per sq m. 49. A well of diameter 7 m is dug 22 m deep. The earth taken out is spread evenly to form a platform 22 m × 14 m. Find the height of the platform. 50. How many bricks of dimensions 25 cm × 12.5 cm × 7.5 cm are needed to build a wall 6 m × 5 m × 0.5 m (ignore mortar)?


10. Answer Key with Quick Solutions

Set A 1. 12²=144 sq cm 2. 2(20+15)=70 m 3. ½×24×15=180 sq cm 4. s=18;area=√[18×9×8×1]=√1296=36 sq cm 5. circumference=2×(22/7)×28=176 cm;area=(22/7)×784=2464 sq cm 6. ½×(22/7)×49=77 sq cm 7. 12×9=108 sq cm 8. half-diagonal known:half of d1=5(from side13,other half diagonal via13²=5²+x²⇒x=12⇒d2=24);area=½×10×24=120 sq cm 9. ½×(20+12)×10=160 sq cm 10. √(256+144)=√400=20 cm 11. π(14²−7²)=(22/7)(196−49)=(22/7)(147)=462 sq cm 12. (3√3/2)×16=24√3≈41.57 sq cm

Set B 13. Volume=729 cubic cm;TSA=6×81=486 sq cm 14. 12×9×6=648 cubic cm 15. 2(8×5+5×4+4×8)=2(40+20+32)=2(92)=184 sq cm 16. Volume=(22/7)×196×20=12320 cubic cm;CSA=2×(22/7)×14×20=1760 sq cm 17. TSA=2πr(h+r)=2×(22/7)×7×22=968 sq cm 18. (1/3)×(22/7)×36×8=(1/3)×(22/7)×288=301.71 cubic cm (=6336/21=301.71) 19. l=√(81+144)=15;CSA=π×9×15=424.29 sq cm(=9900/… let’s just express as (22/7)×9×15=2970/7≈424.29);TSA=CSA+πr²=424.29+(22/7)×81≈424.29+254.57=678.86 sq cm 20. (4/3)×(22/7)×9261=38808 cubic cm 21. 4×(22/7)×196=2464 sq cm 22. (2/3)×(22/7)×27=56.57 cubic cm 23. 3π×49=3×(22/7)×49=462 sq cm 24. 5√3≈8.66 cm 25. π×14×(25−9)=(22/7)×14×16=704 cubic cm 26. (1/3)×(22/7)×8×(36+9+18)=(1/3)×(22/7)×8×63=(1/3)×1584=528 cubic cm

Set C 27. n×27=729⇒n=27 28. equal volumes:πr²×15=(1/3)πr²×h⇒h=45⇒45 cm 29. (4/3)π(4.2)³=π(6)²h⇒(4/3)(74.088)=36h⇒98.784=36h⇒h≈2.744 cm 30. cone volume=(1/3)π×36×24=288π. sphere:(4/3)πR³=288π⇒R³=216⇒R=6 cm 31. sum of volumes=27+64+125=216=side³⇒side=6 cm 32. circumference=176⇒r=176/(2×22/7)=176×7/44=28 cm;area=(22/7)×784=2464 sq cm 33. cylinder volume=(22/7)×36×8=905.14cubic cm(=6336/7);sphere volume each=(4/3)(22/7)(8)=33.52cubic cm(704/21);n=(6336/7)/(704/21)=(6336/7)×(21/704)=(6336×3)/704=19008/704=27 spheres 34. n r³=R³⇒12×8=96=R³⇒R=∛96≈4.58 cm

Set D 35. cylinder=(22/7)×49×10=1540;hemisphere=(2/3)(22/7)(343)=718.67;Total≈2258.67 cubic cm 36. CSA cylinder=2×(22/7)×7×10=440;CSA hemisphere=2×(22/7)×49=308;flat circle at other end=(22/7)×49=154;Total=440+308+154=902 sq cm 37. cylinder=(22/7)×49×10=1540;cone=(1/3)×(22/7)×49×24=1232;Total=2772 cubic cm 38. r=2.5,cylindrical part h=9;cylinder vol=(22/7)(6.25)(9)=176.79;2 hemispheres=(4/3)(22/7)(15.625)=65.48;Total≈242.27 cubic cm 39. cube volume=1000;hemisphere volume=(2/3)(22/7)(42.875)=89.83;Remaining≈910.17 cubic cm 40. CSA cylinder=2×(22/7)×3.5×10=220;CSA hemisphere=2×(22/7)×12.25=77;bottom circle=(22/7)×12.25=38.5;Total=220+77+38.5=335.5 sq cm 41. cone vol=(1/3)(22/7)(12.25)(12)=153.86;hemisphere=(2/3)(22/7)(42.875)=89.83;Total≈243.69 cubic cm 42. cylinder part=(22/7)(12.25)(3)=115.5;cone part height=2,vol=(1/3)(22/7)(12.25)(2)=25.67;Total≈141.17 cubic m 43. surface area ratio=r²ratio=2²=4:1 44. 27:1 45. 8:27 46. equal volumes: r²h const-ish—actually r₁²h₁=r₂²h₂ ⇒ h ratio inverse of r² ratio: h1:h2=r2²:r1²=25:9 ⇒ h1:h2=25:9

Set F 47. tank volume=6×5×4.5=135 cubic m=π×9×h⇒135=(22/7)(9)h⇒h=135×7/(22×9)=945/198≈4.77 m 48. CSA=2π×1.4×5=2×(22/7)×1.4×5=44 sq m;cost=44×15=₹660 49. well volume=π×3.5²×22=(22/7)(12.25)(22)=847 cubic m;platform area=22×14=308;height=847/308=2.75 m 50. wall volume=600×500×50=15,000,000 cm³;brick volume=25×12.5×7.5=2343.75cm³;bricks=15000000/2343.75=6400 bricks



11. Advanced Level (SSC CGL Tier-2 / RRB JE / Toughest Competitive Level)

11.1 Advanced Concepts

Multi-solid composite objects with three or more parts: e.g., a cone on a cylinder on a hemisphere (a rocket/toy shape), requiring careful tracking of which surfaces are external.

Ratio/scaling problems with mixed dimension changes: e.g., “radius increased by 20%, height decreased by 10%, find % change in volume” — requires multiplying independent percentage factors, not simple addition.

Frustum-heavy problems: bucket-shaped objects, painting/coating problems on frustums, and frustum-to-cone relationships.

Optimization-flavored mensuration (typically simplified for exam context): e.g., “minimum material to construct a box of a given volume” — usually reduces to a direct formula application rather than true calculus optimization at this level.

Water/liquid transfer between differently-shaped containers, including partial fills and overflow calculations.

Diagonal and space-diagonal problems for combined solids, and problems requiring conversion between different measurement units mid-calculation (mm to cm to m).

11.2 Advanced Solved Examples

Advanced Example 1. A solid is composed of a cone of height 9 cm mounted on a hemisphere of radius 6 cm, which is mounted on a cylinder of the same radius and height 10 cm (like a rocket). Find the total volume. Solution: Cylinder: π×36×10=360π. Hemisphere: (2/3)π×216=144π. Cone: (1/3)π×36×9=108π. Total=360π+144π+108π=612π ≈ 1922.65 cubic cm.

Advanced Example 2. The radius of a sphere is increased by 20% and then decreased by 10%. Find the net percentage change in volume. Solution: Net radius factor = 1.2×0.9=1.08. Volume scales as (radius)³: 1.08³=1.259712. Net increase in volume ≈ 25.97%.

Advanced Example 3. A frustum has radii 12 cm and 8 cm and height 9 cm. Find its volume, curved surface area, and total surface area. Solution: Slant height l=√[9²+(12−8)²]=√[81+16]=√97≈9.85. Volume=(1/3)π×9×(144+64+96)=(1/3)π×9×304=912π≈2864.7 cubic cm. CSA=πl(R+r)=π×9.85×20≈619.0 sq cm. TSA=CSA+πR²+πr²=619.0+π(144)+π(64)=619.0+452.4+201.1≈1272.5 sq cm.

Advanced Example 4. A cylindrical bucket (frustum-shaped in reality, but here treated as a true frustum) has top radius 18 cm, bottom radius 12 cm, and height 24 cm. It is filled with water and then poured into a cylindrical vessel of radius 15 cm. Find the height of water in the cylindrical vessel. Solution: Frustum volume=(1/3)π×24×(324+144+216)=(1/3)π×24×684=5472π. Cylinder volume=π×225×h=225πh. Set equal: 225h=5472 ⇒ h=24.32 cm.

Advanced Example 5. A cube of edge 12 cm is cut into 8 identical smaller cubes. Find the total surface area of all 8 smaller cubes combined, and compare it to the original cube’s surface area. Solution: Each small cube has edge=6 cm (since 12/2=6, cutting into 2×2×2=8 pieces). TSA of each small cube=6×36=216 sq cm. Total for 8 cubes=8×216=1728 sq cm. Original cube TSA=6×144=864 sq cm. The total surface area doubles (1728 vs 864) — because cutting creates new internal faces that become external.

Advanced Example 6. A hemispherical bowl of internal radius 9 cm contains liquid. The liquid is poured into cylindrical bottles of radius 3 cm and height 4 cm. Find how many bottles can be filled completely. Solution: Hemisphere volume=(2/3)π×729=486π. Bottle volume=π×9×4=36π. Number of bottles=486π/36π=13.5 → 13 bottles filled completely (with some liquid left over).

Advanced Example 7. A right circular cylinder and a cone have equal base radii and equal volumes. If the cylinder’s height is 6 cm, find the cone’s height, and then find the ratio of their curved surface areas if the cone’s slant height is 10 cm and the radius is 8 cm. Solution: Equal volumes, equal radius: cone height = 3×cylinder height = 18 cm. CSA cylinder=2πrh=2π×8×6=96π. CSA cone=πrl=π×8×10=80π. Ratio (cylinder:cone) = 96:80 = 6:5.

Advanced Example 8. A metallic sheet is in the form of a rectangle 44 cm × 20 cm. It is rolled along its length to form a cylinder. Find the volume of the cylinder formed, and separately find the volume if rolled along its width instead. Solution: Rolled along length (44 cm becomes circumference, height=20cm): r=44/(2π)=7 cm (using π=22/7). Volume=π×49×20=(22/7)×49×20=3080 cubic cm. Rolled along width (20cm becomes circumference, height=44cm): r=20/(2π)=20×7/44=3.18 cm. Volume=π×(3.18)²×44≈(22/7)×10.12×44≈1400 cubic cm (approx; exact via r=10/π: volume=π×(10/π)²×44=100×44/π=4400/π≈1400.28).

Advanced Example 9. A conical tent has a base radius of 7 m and a height of 24 m. Find the cost of the canvas required at ₹70 per sq m, and separately find the volume of air inside the tent. Solution: Slant height=√(49+576)=25. CSA=πrl=(22/7)×7×25=550 sq m. Cost=550×70=₹38,500. Volume=(1/3)×(22/7)×49×24=1232 cubic m.

Advanced Example 10. Water flows through a cylindrical pipe of internal diameter 7 cm at 5 m/s. Find the volume of water (in litres) that flows out in 1 hour. Solution: radius=3.5cm=0.035m. Cross-section area=π×(0.035)²=(22/7)×0.001225=0.00385 sq m. Flow rate=area×speed=0.00385×5=0.01925 cubic m/sec. In 1 hour (3600 sec): 0.01925×3600=69.3 cubic m = 69,300 litres.

11.3 Advanced Practice Question Bank (20 Questions)

  1. A solid consists of a cone (height 8 cm) on a hemisphere (radius 6 cm) on a cylinder (same radius, height 12 cm). Find the total volume.
  2. The radius of a cylinder is increased by 25% and height decreased by 20%. Find the net % change in volume.
  3. A frustum has radii 10 cm and 6 cm, height 12 cm. Find its volume and CSA (slant height first).
  4. A frustum-shaped bucket has top radius 21 cm, bottom radius 14 cm, height 30 cm. Find its volume in litres.
  5. A cube of edge 15 cm is cut into 27 identical smaller cubes. Find the ratio of total surface area of all small cubes to the original cube’s surface area.
  6. A hemispherical tank of radius 12 cm is emptied into cylindrical bottles of radius 4 cm, height 6 cm. Find the maximum number of bottles that can be completely filled.
  7. A cylinder and cone have equal radii and equal volumes. The cone’s height is 27 cm. Find the cylinder’s height.
  8. A rectangular sheet 66 cm × 28 cm is rolled along its length into a cylinder. Find the volume.
  9. A conical tent has radius 6 m, height 8 m. Find the canvas cost at ₹80/sq m and the tent’s air volume.
  10. Water flows through a pipe of diameter 14 cm at 3 m/s. Find the volume (litres) discharged in 30 minutes.
  11. A sphere of radius 15 cm is melted and recast into a cone of height 45 cm. Find the cone’s radius.
  12. Find the volume of a frustum with radii 15 and 9, height 16, and its slant height.
  13. A cylindrical vessel of radius 6 cm contains water up to a height of 10 cm. A sphere of radius 3 cm is dropped in fully submerged. Find the rise in water level.
  14. Three metal spheres of radii 3, 4, 5 cm are melted and recast into a single sphere. Find the surface area of the new sphere.
  15. A cone of radius 9 cm and height 12 cm is cut parallel to the base at half its height, creating a smaller cone on top and a frustum below. Find the volume of the frustum.
  16. Find the total surface area of a solid hemisphere with a cone of the same radius removed from the flat face (radius 7cm, cone height 7cm — cavity cut into hemisphere from the flat face).
  17. A rectangular tank 8m×6m×3m is filled with water. This water is transferred to a cylindrical tank of radius 3.5m. Find the height of water in the cylindrical tank.
  18. Find the volume of material used to make a hollow cylindrical pipe with external radius 7cm, internal radius 5cm, length 21cm.
  19. A sphere and a cube have equal surface areas. If the cube’s edge is 6 cm, find the sphere’s radius.
  20. A conical vessel of radius 12 cm and height 20 cm is full of water. The water is poured into a cylindrical vessel of radius 10 cm. Find the height of water in the cylindrical vessel.

11.4 Advanced Answer Key

  1. cylinder=π×36×12=432π;hemisphere=(2/3)π(216)=144π;cone=(1/3)π×36×8=96π;total=432π+144π+96π=672π≈2111.15 cubic cm
  2. factor=1.25²×0.8=1.5625×0.8=1.25;net increase=25%
  3. l=√[144+16]=√160≈12.65;volume=(1/3)π×12×(100+36+60)=(1/3)π×12×196=784π≈2463.0 cubic cm;CSA=π×12.65×16≈635.9 sq cm
  4. volume=(1/3)π×30×(441+196+294)=(1/3)π×30×931=9310π≈29253.5cubic cm=≈29.25 litres
  5. small cube edge=5;each TSA=6×25=150;total=27×150=4050;original TSA=6×225=1350;ratio=4050:1350=3:1
  6. hemisphere volume=(2/3)π×1728=1152π;bottle volume=π×16×6=96π;number=1152/96=12 bottles exactly
  7. equal volume,radius:cone height=3×cylinder height⇒27=3×cylinder height⇒cylinder height=9 cm
  8. r=66/(2π)=66×7/44=10.5cm(using22/7);volume=π×110.25×28=(22/7)×110.25×28=9702 cubic cm
  9. l=√(36+64)=10;CSA=π×6×10=60π≈188.57;cost=188.57×80≈₹15,085.7;volume=(1/3)π×36×8=96π≈301.71 cubic m
  10. r=0.07m;area=π×0.0049=0.0154sqm;flow/sec=0.0154×3=0.0462cubicm;in30min(1800s)=83.16cubicm=83,160 litres
  11. sphere volume=(4/3)π×3375=4500π;cone volume=(1/3)πr²(45)=15πr²;set equal:15r²=4500⇒r²=300⇒r=√300≈17.32 cm
  12. l=√[256+36]=√292≈17.09;volume=(1/3)π×16×(225+81+135)=(1/3)π×16×441=2352π≈7389.6 cubic units
  13. sphere volume=(4/3)π×27=36π;this equals rise×π×36(cylinder cross-section)⇒rise=36π/36π… let’s redo:rise×π×6²=36π⇒rise×36=36⇒rise=1 cm
  14. combined volume=(4/3)π(27+64+125)=(4/3)π(216)⇒R³=216⇒R=6;surface area=4π×36=144π≈452.39 sq cm
  15. full cone volume=(1/3)π×81×12=324π.smaller cone(half height,so radius&height halved)=(1/3)π×20.25×6=40.5π.frustum=324π−40.5π=283.5π≈890.65 cubic cm
  16. hemisphere curved surface=2π×49=98π;cone curved surface(l=√(49+49)=7√2)=π×7×7√2=49√2π;flat ring area=0(since cone base radius=hemisphere radius,no ring, just circle removed and cone surface added)=hemisphere CSA+cone CSA=98π+49√2π=π(98+49√2)≈π(98+69.3)≈π(167.3)≈525.5 sq cm
  17. tank volume=8×6×3=144 cubic m;cylinder:π×12.25×h=144⇒h=144/(22/7×12.25)=144/38.5≈3.74 m
  18. volume=πh(R²−r²)=(22/7)×21×(49−25)=(22/7)×21×24=1584 cubic cm
  19. cube surface=6×36=216=sphere surface=4πr²⇒r²=216/(4π)=54/π≈17.19⇒r≈4.15 cm
  20. cone volume=(1/3)π×144×20=960π;cylinder:π×100×h=960π⇒h=9.6 cm

End of Mensuration study material. The volume/surface-area techniques here pair directly with the upcoming Trigonometry module for height-and-distance style applied problems.

25 min left
‹
›