Chapter 5 of 11 · 16 min read

Chapter 3: IUPAC Nomenclature of Mononuclear Coordination Compounds

What you will learn

  • The rules for writing the formula of a mononuclear complex.

  • The names of common ligands and the -ate names of metals in complex anions.

  • The step-by-step rules for naming cationic, anionic and neutral complexes.

  • How to name complexes with ambidentate and polydentate ligands.

  • How to write a formula back from a given IUPAC name.

3.1 Why a system is needed

Old names like "yellow prussiate of potash" for K₄[Fe(CN)₆] tell you nothing about structure. IUPAC names tell you every ligand, how many, the metal and its oxidation state. Once you know the rules, you can write the formula from the name, like reading an auto-rickshaw meter.

This book uses the IUPAC 2005 names that NCERT now follows: chlorido, cyanido, hydroxido, and so on. Older names (chloro, cyano, hydroxo) still appear in some papers. Treat them as the same ligand.

3.2 Rules for writing formulas

  1. Write the central atom first.

  2. Then list ligands in alphabetical order of their formula or abbreviation. Charge does not matter for the order.

  3. Write polyatomic ligands in parentheses, and abbreviations like en in parentheses too.

  4. Enclose the whole coordination entity in square brackets. Put its charge outside as a superscript.

  5. In a salt, the cation is written before the anion.

By strict IUPAC order, the purple cobalt complex is written [CoCl(NH₃)₅]Cl₂. Many books and NEET papers still write it as [Co(NH₃)₅Cl]Cl₂. Both mean the same compound, and you should recognise both.

3.3 Names of ligands

Anionic ligands end in -o. Neutral ligands keep their names, with four special exceptions. Cationic ligands end in -ium.

LigandFormulaChargeName in complex
ChlorideCl⁻−1chlorido
BromideBr⁻−1bromido
FluorideF⁻−1fluorido
CyanideCN⁻−1cyanido
HydroxideOH⁻−1hydroxido
OxideO²⁻−2oxido
Nitrite via NNO₂⁻−1nitrito-N
Nitrite via OONO⁻−1nitrito-O
Thiocyanate via S / via NSCN⁻ / NCS⁻−1thiocyanato-S / thiocyanato-N
SulfateSO₄²⁻−2sulfato
CarbonateCO₃²⁻−2carbonato
OxalateC₂O₄²⁻−2oxalato
WaterH₂O0aqua
AmmoniaNH₃0ammine
Carbon monoxideCO0carbonyl
Nitric oxideNO0nitrosyl
Ethane-1,2-diamineen0ethane-1,2-diamine
Pyridinepy0pyridine

Note the double m in ammine. "Amine" with one m is an organic compound.

3.4 Names of metals in complex anions

When the coordination entity is an anion, the metal name ends in -ate. Some metals use their Latin roots.

MetalIn cationic or neutral complexIn anionic complex
Feironferrate
Cucoppercuprate
Agsilverargentate
Augoldaurate
Sntinstannate
Pbleadplumbate
Cocobaltcobaltate
Ninickelnickelate
Znzinczincate
Crchromiumchromate
Ptplatinumplatinate
Alaluminiumaluminate

3.5 Rules for naming

  1. Name the cation first and the anion second, with a space between them. This holds whether the complex is the cation or the anion.

  2. Inside the coordination entity, name the ligands first in alphabetical order, then the metal.

  3. Show the number of each simple ligand with di-, tri-, tetra-, penta-, hexa-.

  4. If the ligand name already contains a number (ethane-1,2-diamine) or is complicated, use bis-, tris-, tetrakis- and put the ligand name in parentheses.

  5. Ignore these number prefixes while alphabetising. Tetraammine counts under "a", dichlorido under "c".

  6. Give the oxidation state of the metal in Roman numerals in parentheses, with no space: cobalt(III). Zero is written (0).

  7. If the entity is an anion, the metal name ends in -ate (Section 3.4).

  8. A neutral complex is named as one word, with no separate cation or anion.

  9. Water of crystallisation is named at the end: trihydrate, hexahydrate.

A quick check list while naming:

[cation name]    [anion name],entity=ligands (alphabetical)+metal(-ate)+(oxidation state)\text{[cation name]} \;\; \text{[anion name]}, \quad \text{entity} = \text{ligands (alphabetical)} + \text{metal(-ate)} + \text{(oxidation state)}

3.6 Many worked names

FormulaIUPAC name
[Co(NH₃)₆]Cl₃hexaamminecobalt(III) chloride
[CoCl(NH₃)₅]Cl₂pentaamminechloridocobalt(III) chloride
[Co(NH₃)₄(H₂O)Cl]Cl₂tetraammineaquachloridocobalt(III) chloride
[Cr(NH₃)₃(H₂O)₃]Cl₃triamminetriaquachromium(III) chloride
[Pt(NH₃)₂Cl₂]diamminedichloridoplatinum(II)
[Ni(CO)₄]tetracarbonylnickel(0)
K₄[Fe(CN)₆]potassium hexacyanidoferrate(II)
K₃[Fe(CN)₆]potassium hexacyanidoferrate(III)
K₃[Fe(C₂O₄)₃]potassium trioxalatoferrate(III)
K₂[Zn(OH)₄]potassium tetrahydroxidozincate(II)
Na₃[Co(NO₂)₆]sodium hexanitrito-N-cobaltate(III)
[Co(en)₃]₂(SO₄)₃tris(ethane-1,2-diamine)cobalt(III) sulfate
[CoCl₂(en)₂]Cldichloridobis(ethane-1,2-diamine)cobalt(III) chloride
[Ag(NH₃)₂][Ag(CN)₂]diamminesilver(I) dicyanidoargentate(I)
[Pt(NH₃)₄][PtCl₄]tetraammineplatinum(II) tetrachloridoplatinate(II)
Na[Au(CN)₂]sodium dicyanidoaurate(I)
K[Cr(H₂O)₂(C₂O₄)₂]·3H₂Opotassium diaquadioxalatochromate(III) trihydrate
Fe₄[Fe(CN)₆]₃iron(III) hexacyanidoferrate(II)

Worked examples

Worked example 3.1: Name [Co(NH₃)₆]Cl₃.

Solution: Cation: six NH₃ = hexaammine. Co: x + 0 = +3, so cobalt(III). Anion: chloride. Name: hexaamminecobalt(III) chloride.

Worked example 3.2: Name K₃[Fe(CN)₆].

Solution: Cation first: potassium. The anion [Fe(CN)₆]³⁻: x + 6(−1) = −3, so x = +3. Anionic complex, so iron becomes ferrate. Name: potassium hexacyanidoferrate(III).

Worked example 3.3: Name [Co(NH₃)₄(H₂O)Cl]Cl₂.

Solution: Ligands: ammine (a-m), aqua (a-q), chlorido (c). Alphabetical order: ammine, aqua, chlorido. Co: x + 0 + 0 − 1 = +2, so +3. Name: tetraammineaquachloridocobalt(III) chloride.

Worked example 3.4: Name [CoCl₂(en)₂]Cl.

Solution: Ligands: chlorido (c) and ethane-1,2-diamine (e). Chlorido comes first. en has a number in its name, so use bis( ). Co: x − 2 = +1, so +3. Name: dichloridobis(ethane-1,2-diamine)cobalt(III) chloride.

Worked example 3.5: Name [Ag(NH₃)₂][Ag(CN)₂].

Solution: Both ions are complexes. Cation [Ag(NH₃)₂]⁺: diamminesilver(I). Anion [Ag(CN)₂]⁻: silver becomes argentate. Name: diamminesilver(I) dicyanidoargentate(I).

Worked example 3.6: Write formulas for (i) tetraamminediaquacobalt(III) chloride, (ii) potassium tetracyanidonickelate(II), (iii) tris(ethane-1,2-diamine)chromium(III) chloride.

Solution: (i) Co(III) with neutral ligands gives a +3 cation, so three Cl⁻: [Co(NH₃)₄(H₂O)₂]Cl₃. (ii) Ni(II) with four CN⁻ gives −2, so two K⁺: K₂[Ni(CN)₄]. (iii) Cr(III) with neutral en gives +3: [Cr(en)₃]Cl₃.

Worked example 3.7: Write the formula of amminebromidochloridonitrito-N-platinate(II) ion.

Solution: Pt(II) = +2. Ligands: NH₃ (0), Br⁻ (−1), Cl⁻ (−1), NO₂⁻ via N (−1). Charge = +2 + 0 − 1 − 1 − 1 = −1. Formula: [Pt(NH₃)BrCl(NO₂)]⁻.

Worked example 3.8: Write the formula of dichloridobis(ethane-1,2-diamine)platinum(IV) nitrate.

Solution: Pt(IV) = +4. Two Cl⁻ and two neutral en give +4 − 2 = +2. Two NO₃⁻ balance it. Formula: PtCl₂(en)₂₂.

Worked example 3.9: Find the error in the name "tetracarbonylnickelate(0)" for [Ni(CO)₄] and correct it.

Solution: The complex is neutral, not an anion. So -ate must not be used. Correct name: tetracarbonylnickel(0).

Quick revision

  • Cation first, anion second; ligands alphabetical, then metal.

  • Anionic ligands end in -o: chlorido, cyanido, hydroxido, oxalato, nitrito-N.

  • Special neutral names: aqua, ammine, carbonyl, nitrosyl.

  • Use bis, tris, tetrakis for en and other ligands whose names contain numbers.

  • Number prefixes are ignored in alphabetical order.

  • Anionic complex: metal ends in -ate (ferrate, cuprate, argentate, aurate, stannate, plumbate).

  • Oxidation state in Roman numerals in brackets; (0) for zero.

NEET traps

  • Writing "amine" instead of "ammine" for NH₃.

  • Putting "di" or "tetra" into the alphabetical order. Dichlorido sorts under c, not d.

  • Using -ate for a neutral or cationic complex, like "tetracarbonylnickelate".

  • Writing "ironate" or "silverate" instead of ferrate and argentate.

  • Using "di" with en: it must be bis(ethane-1,2-diamine).

  • Getting the number of counter ions wrong when converting a name to a formula. Find the charge of the entity first.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The IUPAC name of NH₃ as a ligand is (a) amine (b) ammine (c) ammonia (d) amido

2. The IUPAC name of H₂O as a ligand is (a) aqua (b) hydroxido (c) oxido (d) water

3. When the coordination entity is an anion, the name of the metal ends in (a) -ium (b) -ite (c) -ate (d) -ide

4. In an anionic complex, iron is named (a) ironate (b) ferrate (c) ferrite (d) ferric

5. In the name of an ionic coordination compound, which part comes first? (a) The anion (b) The counter ion, always (c) The cation (d) The ligand with the highest charge

6. The prefix used to show two ethane-1,2-diamine ligands is (a) di (b) bi (c) dis (d) bis

7. CO as a ligand is named (a) carbonyl (b) carbonato (c) carbido (d) oxidocarbon

8. The IUPAC name of K₄[Fe(CN)₆] is (a) tetrapotassium hexacyanoiron (b) potassium hexacyanidoiron(II) (c) potassium hexacyanidoferrate(III) (d) potassium hexacyanidoferrate(II)

9. The IUPAC name of [Ni(CO)₄] is (a) tetracarbonylnickelate(0) (b) tetracarbonylnickel(II) (c) nickel tetracarbonyl(IV) (d) tetracarbonylnickel(0)

10. NO₂⁻ bonded to the metal through nitrogen is named (a) nitrito-O (b) nitrito-N (c) nitrosyl (d) nitrato

Level 2: NEET standard

11. The IUPAC name of [Co(NH₃)₅Cl]Cl₂ is (a) pentaamminechloridocobalt(III) chloride (b) chloridopentaamminecobalt(III) chloride (c) pentaamminechloridocobalt(II) chloride (d) pentaamminechloridocobaltate(III) chloride

12. The IUPAC name of [Co(en)₂Cl₂]Cl is (a) bis(ethane-1,2-diamine)dichloridocobalt(III) chloride (b) dichloridobis(ethane-1,2-diamine)cobalt(III) chloride (c) dichloridodi(ethane-1,2-diamine)cobalt(III) chloride (d) dichloridobis(ethane-1,2-diamine)cobaltate(III) chloride

13. The IUPAC name of K₃[Fe(C₂O₄)₃] is (a) potassium trioxalatoferrate(II) (b) potassium trioxalatoiron(III) (c) potassium trioxalatoferrate(III) (d) tripotassium oxalatoferrate(III)

14. The formula of tetraamminediaquacobalt(III) chloride is (a) [Co(NH₃)₄(H₂O)₂]Cl₂ (b) [Co(NH₃)₄(H₂O)₂]Cl₃ (c) [Co(NH₃)₄(H₂O)Cl]Cl₂ (d) [Co(NH₃)₄(H₂O)₂Cl]Cl₂

15. The IUPAC name of [Pt(NH₃)₄][PtCl₄] is (a) tetrachloridoplatinum(II) tetraammineplatinate(II) (b) tetraammineplatinum(IV) tetrachloridoplatinate(0) (c) tetraammineplatinum(II) tetrachloridoplatinate(II) (d) platinum tetraammine tetrachloride

16. The formula of potassium tetrahydroxidozincate(II) is (a) K[Zn(OH)₄] (b) K₄[Zn(OH)₄] (c) K₂[Zn(OH)₂] (d) K₂[Zn(OH)₄]

17. The IUPAC name of [Cr(NH₃)₃(H₂O)₃]Cl₃ is (a) triaquatriamminechromium(III) chloride (b) triamminetriaquachromium(III) chloride (c) triamminetriaquachromate(III) chloride (d) triamminetriaquachromium(II) chloride

18. The IUPAC name of Na₃[Co(NO₂)₆] (NO₂⁻ bonded through N) is (a) sodium hexanitrito-N-cobaltate(III) (b) sodium hexanitrito-N-cobalt(III) (c) sodium hexanitrito-N-cobaltate(II) (d) trisodium hexanitritocobalt

19. The correct IUPAC name of [Ag(NH₃)₂][Ag(CN)₂] is (a) diamminesilver(I) dicyanidosilver(I) (b) dicyanidoargentate(I) diamminesilver(I) (c) diamminesilver(I) dicyanidoargentate(I) (d) diammineargentate(I) dicyanidosilver(I)

20. The formula of sodium dicyanidoaurate(I) is (a) Na[Au(CN)₂] (b) Na₂[Au(CN)₂] (c) Na[Au(CN)₄] (d) Na₃[Au(CN)₂]

21. The formula of potassium tetracyanidonickelate(II) is (a) K[Ni(CN)₄] (b) K₃[Ni(CN)₄] (c) K₂[Ni(CN)₄] (d) K₄[Ni(CN)₄]

22. In the IUPAC name of [CoCl(NH₃)₄(H₂O)]²⁺, the ligands appear in the order (a) aqua, ammine, chlorido (b) chlorido, ammine, aqua (c) ammine, chlorido, aqua (d) ammine, aqua, chlorido

Level 3: Challenge

23. The IUPAC name of [Co(NH₃)₅(NO₂)]Cl₂, with NO₂⁻ bonded through N, is (a) pentaamminenitrito-O-cobalt(III) chloride (b) pentaamminenitrito-N-cobalt(III) chloride (c) pentaamminenitrito-N-cobaltate(III) chloride (d) nitrito-N-pentaamminecobalt(II) chloride

24. The formula of dichloridobis(ethane-1,2-diamine)platinum(IV) nitrate is (a) [PtCl₂(en)₂]NO₃ (b) Pt(en)₂₂Cl₂ (c) PtCl₂(en)₂₄ (d) PtCl₂(en)₂₂

25. The formula of the amminebromidochloridonitrito-N-platinate(II) ion is (a) [Pt(NH₃)BrCl(NO₂)]⁻ (b) [Pt(NH₃)BrCl(NO₂)]²⁻ (c) [Pt(NH₃)BrCl(ONO)]⁻ (d) [Pt(NH₃)BrCl(NO₂)]⁺

26. The IUPAC name of K[Cr(H₂O)₂(C₂O₄)₂]·3H₂O is (a) potassium dioxalatodiaquachromate(III) trihydrate (b) potassium diaquadioxalatochromium(III) trihydrate (c) potassium diaquadioxalatochromate(III) trihydrate (d) potassium diaquadioxalatochromate(II) trihydrate

27. Prussian blue, Fe₄[Fe(CN)₆]₃, is named (a) iron(II) hexacyanidoferrate(III) (b) iron(III) hexacyanidoferrate(II) (c) tetrairon tricyanidoferrate (d) iron(III) hexacyanidoiron(II)

28. The IUPAC name of [Co(en)₃]₂(SO₄)₃ is (a) tris(ethane-1,2-diamine)cobalt(III) sulfate (b) tri(ethane-1,2-diamine)cobalt(III) sulfate (c) tris(ethane-1,2-diamine)cobalt(II) sulfate (d) tris(ethane-1,2-diamine)cobaltate(III) sulfate

29. Assertion (A): [Ni(CO)₄] is named tetracarbonylnickelate(0). Reason (R): The -ate ending is used for the metal only when the coordination entity is an anion. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Multiplying prefixes such as di, tri and bis are ignored while arranging ligands alphabetically. Statement II: The IUPAC name of [Pt(NH₃)₂Cl₂] is dichloridodiammineplatinum(II). (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bNH₃ is ammine (double m)
2aH₂O is aqua
3cAnionic entity takes -ate
4bLatin ferrum gives ferrate
5cCation is always named first
6dbis( ) for en
7aCO is carbonyl
8dAnion [Fe(CN)₆]⁴⁻ has Fe(II)
9dNeutral complex; Ni(0)
10bBonding atom N gives nitrito-N
11aammine before chlorido; Co(III)
12bchlorido (c) before ethane (e); bis for en
13cFe(III) in an anion: ferrate(III)
14b+3 cation needs 3 Cl⁻
15cBoth Pt(II); anion takes -ate
16d[Zn(OH)₄]²⁻ needs 2 K⁺
17bammine before aqua; Cr(III)
18a3 + x − 6 = 0 gives Co(III), anion
19cCation first; anion silver is argentate
20aAu(I) + 2CN⁻ gives −1
21cNi(II) + 4CN⁻ gives −2
22dammine, aqua, chlorido
23bCation, so no -ate; ammine before nitrito
24d+4 − 2 = +2, so two NO₃⁻
25a+2 + 0 − 1 − 1 − 1 = −1
26caqua before oxalato; Cr(III); anion
27bOuter Fe(III), inner Fe(II)
28atris for en; Co(III) cation
29dNeutral complex: tetracarbonylnickel(0)
30cCorrect: diamminedichloridoplatinum(II)

Chapter 3 revision sheet

One-page summary

  • In a salt, name the cation first and the anion second, whether the complex is the cation or the anion.

  • Inside the complex, name the ligands first in alphabetical order, then the metal.

  • Multiplying prefixes (di, tri, tetra) are ignored when alphabetising; "ammine" is filed under a.

  • Use bis, tris, tetrakis for ligands whose names already contain a number, such as ethane-1,2-diamine, with the name in brackets.

  • Anionic ligands end in -o: chlorido, cyanido, hydroxido, oxalato, sulfato, carbonato.

  • Neutral ligands keep their names except aqua (H₂O), ammine (NH₃), carbonyl (CO) and nitrosyl (NO).

  • Ambidentate ligands show the donor atom: nitrito-N (–NO₂), nitrito-O (–ONO), thiocyanato-S, thiocyanato-N.

  • Write the oxidation state in Roman numerals in brackets after the metal: (III), and (0) for zero.

  • For an anionic complex, the metal name ends in -ate; some use Latin roots (ferrate, cuprate, argentate, aurate, stannate, plumbate).

  • A neutral complex is one word with no counter ion: tetracarbonylnickel(0).

  • In formulas, the metal symbol comes first inside [ ], then the ligands; polyatomic ligands go in round brackets.

  • To write a formula from a name, find the metal's oxidation state, add ligand charges, then balance with counter ions.

[cation name][space][anion name]ligands (A→Z)+metal+(oxidation state)\text{[cation name][space][anion name]} \qquad \text{ligands (A→Z)} + \text{metal} + (\text{oxidation state})

Must-remember table

Ligand formulaName in complexMetal in anion-ate name
Cl⁻, CN⁻, OH⁻chlorido, cyanido, hydroxidoFeferrate
C₂O₄²⁻, CO₃²⁻, SO₄²⁻oxalato, carbonato, sulfatoCucuprate
H₂O, NH₃aqua, ammineAgargentate
CO, NOcarbonyl, nitrosylAuaurate
NO₂⁻ (N), ONO⁻ (O)nitrito-N, nitrito-OSnstannate
SCN⁻ (S), NCS⁻ (N)thiocyanato-S, thiocyanato-NPbplumbate
enethane-1,2-diamine (with bis/tris)Co, Ni, Pt, Zncobaltate, nickelate, platinate, zincate

Memory aids

  • "Customers Arrive Before Lunch, Metal Opens Later": Cation before Anion; Bracket in alphabetical order of Ligands; then Metal; Oxidation state Last.

  • "Four Famous Latin Ates": Fe-ferrate, Cu-cuprate, Ag-argentate, Au-aurate (plus Sn-stannate, Pb-plumbate).

  • "Am-Aq-Car-Ni": the four special neutral names: ammine, aqua, carbonyl, nitrosyl.

  • "Ammine has two m's like ammonia's two m's": amine (one m) is an organic compound.

Concept connections

  • Naming organic ligands (ethane-1,2-diamine, pyridine) follows the rules of Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • Oxidation states and Latin names of metals connect to Chemistry Book 11: d- and f-Block Elements.

  • Ionic charges and formula writing use Chemistry Book 1: Some Basic Concepts in Chemistry.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (formula) with List II (IUPAC name).

List I:

  • A. [Co(NH₃)₅Cl]Cl₂

  • B. K₃[Fe(CN)₆]

  • C. [Ni(CO)₄]

  • D. [Pt(NH₃)₂Cl₂]

List II:

  • (i) tetracarbonylnickel(0)

  • (ii) diamminedichloridoplatinum(II)

  • (iii) pentaamminechloridocobalt(III) chloride

  • (iv) potassium hexacyanidoferrate(III)

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-i, D-iii

32. Match List I (metal in an anionic complex) with List II (name of the metal part).

List I:

  • A. Ag

  • B. Au

  • C. Sn

  • D. Pb

List II:

  • (i) plumbate

  • (ii) argentate

  • (iii) stannate

  • (iv) aurate

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-iii, D-i

33. Match List I (ligand and mode of binding) with List II (name used in the complex).

List I:

  • A. NO₂⁻ bonded through N

  • B. SCN⁻ bonded through N

  • C. NO (neutral)

  • D. OH⁻

List II:

  • (i) nitrosyl

  • (ii) hydroxido

  • (iii) nitrito-N

  • (iv) thiocyanato-N

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-i, B-iv, C-iii, D-ii

34. Match List I (name) with List II (formula).

List I:

  • A. tris(ethane-1,2-diamine)cobalt(III) sulfate

  • B. potassium trioxalatoaluminate(III)

  • C. hexaamminecobalt(III) hexacyanidochromate(III)

  • D. tetraamminediaquacobalt(III) chloride

List II:

  • (i) [Co(NH₃)₄(H₂O)₂]Cl₃

  • (ii) [Co(en)₃]₂(SO₄)₃

  • (iii) [Co(NH₃)₆][Cr(CN)₆]

  • (iv) K₃[Al(C₂O₄)₃]

(a) A-iii, B-iv, C-ii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-i, B-iv, C-iii, D-ii

35. How many of the following names are correct?

  • A. [Cr(NH₃)₃(H₂O)₃]Cl₃: triamminetriaquachromium(III) chloride

  • B. K₂[Zn(OH)₄]: potassium tetrahydroxidozincate(II)

  • C. [Co(en)₃]Cl₃: triethane-1,2-diaminecobalt(III) chloride

  • D. Na[Ag(CN)₂]: sodium dicyanidosilver(I)

  • E. [Pt(NH₃)₄][PtCl₄]: tetraammineplatinum(II) tetrachloridoplatinate(II)

(a) 2 (b) 4 (c) 5 (d) 3

36. Choose the correct set of naming rules.

  • A. Prefixes such as di and tri are ignored when ligands are put in alphabetical order.

  • B. In an anionic complex, the metal's name ends in -ium.

  • C. A neutral complex is named as a single word with no counter ion.

  • D. The oxidation state of the metal is written in Arabic numerals.

(a) A and C only (b) A and B only (c) B and D only (d) A, C and D only

37. For K₃[Co(C₂O₄)₃], choose the correct set of statements.

  • A. Its name is potassium trioxalatocobaltate(III).

  • B. Cobalt is in the +3 state.

  • C. The CN of cobalt is 3.

  • D. The ligand name ends in -o because oxalate is an anion.

(a) A and B only (b) B and C only (c) A, B and D only (d) A, B, C and D

38. How many of these name-to-formula pairs are correct?

  • A. diamminesilver(I) dicyanidoargentate(I): [Ag(NH₃)₂][Ag(CN)₂]

  • B. pentaamminenitrito-O-cobalt(III) chloride: [Co(NH₃)₅(ONO)]Cl₂

  • C. potassium tetracyanidonickelate(II): K₂[Ni(CN)₄]

  • D. hexaaquairon(II) sulfate: [Fe(H₂O)₆]SO₄

  • E. tetrachloridocuprate(II) ion: [CuCl₄]³⁻

(a) 3 (b) 4 (c) 5 (d) 2

39. A student's table pairs names with formulas. Which row is wrong?

RowNameFormula
Pamminebromidochloridonitrito-N-platinate(II) ion[Pt(NH₃)BrCl(NO₂)]⁻
Qdichloridobis(ethane-1,2-diamine)platinum(IV) nitratePtCl₂(en)₂₂
Riron(III) hexacyanidoferrate(II)Fe₄[Fe(CN)₆]₃
Smercury(II) tetrathiocyanato-S-cobaltate(III)Hg[Co(SCN)₄]

(a) P (b) Q (c) R (d) S

40. For tetraammineaquachloridocobalt(III) chloride, the total number of ligands and the number of counter ions per formula unit are

(a) 6 and 2 (b) 6 and 3 (c) 5 and 2 (d) 7 and 1

41. A diagram shows a square planar Pt(II) centre with two NH₃, one Cl⁻ and one NO₂⁻ bonded through N. The unit carries no overall charge. Its IUPAC name is

(a) chloridodiamminenitrito-N-platinum(II) (b) diamminechloridonitrito-N-platinum(II) (c) diamminechloridonitrito-N-platinate(II) (d) diamminechloridonitrito-O-platinum(II)

Case for Q42–43: A chemist makes two cobalt(III) compounds. X has cobalt bonded to two ethane-1,2-diamine and two Cl⁻ inside the sphere, with nitrate as the counter ion. Y is named potassium diamminetetracyanidocobaltate(III).

42. The IUPAC name of X is

(a) bis(ethane-1,2-diamine)dichloridocobalt(III) nitrate (b) dichloridodi(ethane-1,2-diamine)cobalt(III) nitrate (c) dichloridobis(ethane-1,2-diamine)cobalt(III) nitrate (d) dichloridobis(ethane-1,2-diamine)cobaltate(III) nitrate

43. The formula of Y is

(a) K₂[Co(NH₃)₂(CN)₄] (b) K[Co(NH₃)₄(CN)₂] (c) K₃[Co(NH₃)₂(CN)₄] (d) K[Co(NH₃)₂(CN)₄]

44. The IUPAC name of [Co(NH₃)₅(CO₃)]Cl is

(a) pentaamminecarbonatocobalt(III) chloride (b) pentaamminecarbonatocobalt(II) chloride (c) carbonatopentaamminecobalt(III) chloride (d) pentaamminecarbonatocobaltate(III) chloride

45. Which formula–name pair is wrong?

(a) [Fe(CO)₅]: pentacarbonyliron(0) (b) K₄[Fe(CN)₆]: potassium hexacyanidoiron(II) (c) Na₃[AlF₆]: sodium hexafluoridoaluminate(III) (d) [Cr(H₂O)₆]Cl₃: hexaaquachromium(III) chloride

Level 4 answer key

QAnsReason
31bCation first; neutral complex one word; anion gets -ate
32dLatin roots: argentum, aurum, stannum, plumbum
33aDonor atom shown after the name; NO is nitrosyl; OH⁻ is hydroxido
34cBalance charges: [Co(en)₃]³⁺ needs 3 SO₄²⁻ for 2 cations; Al(III) + 3 ox gives 3−
35dA, B, E correct; en needs tris; silver in an anion is argentate
36aAnionic metal ends in -ate; Roman numerals are used
37cThree bidentate oxalates give CN 6, not 3
38bCu(II) with four Cl⁻ gives [CuCl₄]²⁻, not 3−
39dCo(III) + 4(−1) = −1, but Hg²⁺ needs a 2− anion; it is Co(II)
40a[Co(NH₃)₄(H₂O)Cl]Cl₂: 4 + 1 + 1 = 6 ligands, 2 Cl⁻ outside
41bAlphabetical: ammine, chlorido, nitrito; neutral so platinum
42cchlorido before ethane-1,2-diamine; bis for en; cationic so cobalt
43d3 + 0 − 4 = −1, so one K⁺
44ax − 2 = +1, so Co(III); ammine before carbonato
45bAnionic complex of Fe is ferrate: potassium hexacyanidoferrate(II)
16 min left
‹
›