Chapter 7 of 11 · 18 min read

Chapter 5: Bonding: Valence Bond Theory

What you will learn

  • How VBT explains bonding as ligand lone pairs entering empty hybrid orbitals of the metal.

  • The link between hybridisation and shape: sp, sp³, dsp², dsp³, d²sp³, sp³d².

  • The difference between inner orbital (low spin) and outer orbital (high spin) complexes.

  • How to find unpaired electrons and the spin-only magnetic moment.

  • Where VBT fails.

5.1 The basic idea

In valence bond theory (VBT), the metal ion mixes some of its empty orbitals to form a set of equal hybrid orbitals. Each ligand pushes a lone pair into one hybrid orbital. This makes a coordinate (dative) bond. The number of hybrid orbitals equals the coordination number.

Steps to follow for any complex:

  1. Find the oxidation state of the metal and write its d-electron configuration.

  2. Decide whether the ligand forces pairing. Strong ligands like CN⁻ and CO do. Weak ligands like F⁻, Cl⁻ and H₂O usually do not. NH₃ forces pairing with Co³⁺ but not with Ni²⁺.

  3. Count the empty orbitals available and choose the hybridisation.

  4. Fill ligand pairs into the hybrid orbitals and count the unpaired metal electrons left.

5.2 Hybridisation and shape

CNHybridisationOrbitals usedShapeExample
2sps, pLinear[Ag(NH₃)₂]⁺
4sp³s, 3pTetrahedral[NiCl₄]²⁻, [Ni(CO)₄]
4dsp²one (n−1)d (the dx²−y² orbital), s, 2pSquare planar[Ni(CN)₄]²⁻, [Pt(NH₃)₂Cl₂]
5dsp³(n−1)d, s, 3pTrigonal bipyramidal[Fe(CO)₅]
6d²sp³2 (n−1)d, s, 3pOctahedral (inner orbital)[Co(NH₃)₆]³⁺, [Fe(CN)₆]⁴⁻
6sp³d²s, 3p, 2 ndOctahedral (outer orbital)[CoF₆]³⁻, [FeF₆]³⁻

5.3 Inner orbital and outer orbital complexes

For a 3d metal, d²sp³ uses two 3d orbitals. These are inside the 4s and 4p shell, so the complex is an inner orbital complex. Pairing leaves fewer unpaired electrons, so it is also called low spin or spin-paired.

sp³d² uses two 4d orbitals, outside the 4s and 4p. This is an outer orbital complex. No forced pairing happens, so it is high spin.

Compare Co³⁺ (3d⁶) with NH₃ and with F⁻. NH₃ pairs the six electrons into three 3d orbitals, freeing two 3d orbitals for d²sp³. F⁻ does not pair them, so four electrons stay unpaired and the metal must use 4d orbitals.

Figure 5.1 · orbital boxes for Co³⁺ in [Co(NH₃)₆]³⁺ and [CoF₆]³⁻
Figure 5.1 · orbital boxes for Co³⁺ in [Co(NH₃)₆]³⁺ and [CoF₆]³⁻

With NH₃ the six 3d electrons pair up and two 3d orbitals join the hybrid set; with F⁻ four electrons stay unpaired and two 4d orbitals are used instead.

5.4 Magnetic moment

An unpaired electron behaves like a tiny magnet. A complex with unpaired electrons is paramagnetic and is pulled into a magnetic field. A complex with all electrons paired is diamagnetic. The spin-only magnetic moment is

μspin-only=n(n+2) BM\mu_{\text{spin-only}} = \sqrt{n(n+2)} \ \text{BM}

where n is the number of unpaired electrons and BM is the Bohr magneton.

n012345
μ (BM)01.732.833.874.905.92

The reverse also works. From a measured moment, find n, then decide whether the complex is high spin or low spin.

5.5 Standard complexes worked out

In the 3d column, ↑↓ is a paired orbital, ↑ a single electron and – an empty orbital, in the order of five 3d orbitals.

ComplexMetal ion3d electrons in the complexHybridisationShapeUnpaired nμ (BM)
[Co(NH₃)₆]³⁺Co³⁺, 3d⁶↑↓ ↑↓ ↑↓ – –d²sp³Octahedral00
[CoF₆]³⁻Co³⁺, 3d⁶↑↓ ↑ ↑ ↑ ↑sp³d²Octahedral44.90
[Fe(CN)₆]⁴⁻Fe²⁺, 3d⁶↑↓ ↑↓ ↑↓ – –d²sp³Octahedral00
[Fe(H₂O)₆]²⁺Fe²⁺, 3d⁶↑↓ ↑ ↑ ↑ ↑sp³d²Octahedral44.90
[Fe(CN)₆]³⁻Fe³⁺, 3d⁵↑↓ ↑↓ ↑ – –d²sp³Octahedral11.73
[FeF₆]³⁻Fe³⁺, 3d⁵↑ ↑ ↑ ↑ ↑sp³d²Octahedral55.92
[Cr(NH₃)₆]³⁺Cr³⁺, 3d³↑ ↑ ↑ – –d²sp³Octahedral33.87
[Mn(CN)₆]³⁻Mn³⁺, 3d⁴↑↓ ↑ ↑ – –d²sp³Octahedral22.83
[Ni(NH₃)₆]²⁺Ni²⁺, 3d⁸↑↓ ↑↓ ↑↓ ↑ ↑sp³d²Octahedral22.83
[Ni(CN)₄]²⁻Ni²⁺, 3d⁸↑↓ ↑↓ ↑↓ ↑↓ –dsp²Square planar00
[NiCl₄]²⁻Ni²⁺, 3d⁸↑↓ ↑↓ ↑↓ ↑ ↑sp³Tetrahedral22.83
[Ni(CO)₄]Ni(0), 3d⁸ 4s² → 3d¹⁰↑↓ ↑↓ ↑↓ ↑↓ ↑↓sp³Tetrahedral00
[CoCl₄]²⁻Co²⁺, 3d⁷↑↓ ↑↓ ↑ ↑ ↑sp³Tetrahedral33.87
[MnCl₄]²⁻Mn²⁺, 3d⁵↑ ↑ ↑ ↑ ↑sp³Tetrahedral55.92
[Zn(NH₃)₄]²⁺Zn²⁺, 3d¹⁰↑↓ ↑↓ ↑↓ ↑↓ ↑↓sp³Tetrahedral00

Two patterns are worth remembering. A d³ ion like Cr³⁺ always has two empty 3d orbitals, so it is always inner orbital. A d⁸ ion like Ni²⁺ cannot free two 3d orbitals, so its octahedral complexes are always outer orbital.

[Cu(NH₃)₄]²⁺ (Cu²⁺, 3d⁹) is square planar with one unpaired electron. To give it dsp², VBT has to push one electron up into a 4p orbital. This awkward step is one sign of the theory's weakness.

5.6 Limitations of VBT

  • It involves many assumptions, such as when pairing happens, without explaining why.

  • It gives no quantitative reading of magnetic data beyond the spin-only count.

  • It cannot explain the colour of complexes.

  • It does not explain why some ligands are strong and others weak.

  • It cannot reliably predict whether a four-coordinate complex will be tetrahedral or square planar.

  • It gives no energy values, so the stability of different complexes cannot be compared.

Worked examples

Worked example 5.1: Explain the hybridisation, shape and magnetic nature of [Co(NH₃)₆]³⁺.

Solution: Co is +3, so 3d⁶. NH₃ pairs the six electrons into three 3d orbitals. Two 3d, one 4s and three 4p orbitals form six d²sp³ hybrids. Six NH₃ pairs fill them. Shape: octahedral. No unpaired electrons: diamagnetic, inner orbital, low spin.

Worked example 5.2: Explain why [CoF₆]³⁻ is paramagnetic and find its spin-only moment.

Solution: Co³⁺ is 3d⁶. F⁻ is a weak ligand and causes no pairing. The 3d set holds ↑↓ ↑ ↑ ↑ ↑. One 4s, three 4p and two 4d orbitals form sp³d² hybrids. n = 4, so μ = √(4 × 6) = √24 = 4.90 BM.

Worked example 5.3: [NiCl₄]²⁻ is paramagnetic but [Ni(CN)₄]²⁻ is diamagnetic. Explain.

Solution: Both contain Ni²⁺, 3d⁸. Cl⁻ is weak, so two electrons stay unpaired. Hybridisation is sp³ and the shape tetrahedral, with n = 2. CN⁻ is strong and pairs the eight electrons into four 3d orbitals. One 3d orbital is free, so dsp² forms: square planar with n = 0.

Worked example 5.4: Find the hybridisation and spin-only moment of [Fe(CN)₆]³⁻.

Solution: Fe³⁺ is 3d⁵. CN⁻ pairs four electrons into two orbitals and leaves one single: ↑↓ ↑↓ ↑. Two 3d orbitals are free: d²sp³. n = 1, μ = √3 = 1.73 BM.

Worked example 5.5: Describe [Ni(CO)₄] by VBT.

Solution: Ni is in the zero oxidation state: 3d⁸ 4s². CO is strong and pushes the 4s electrons into 3d, giving 3d¹⁰. The empty 4s and 4p orbitals form sp³ hybrids. Shape: tetrahedral. Diamagnetic.

Worked example 5.6: Show that [Cr(NH₃)₆]³⁺ is an inner orbital complex whatever the ligand strength, and find μ.

Solution: Cr³⁺ is 3d³. Three electrons fill three 3d orbitals singly, so two 3d orbitals are always empty. d²sp³ forms without any pairing. n = 3, μ = √15 = 3.87 BM.

Worked example 5.7: An octahedral iron complex has a spin-only moment of 5.92 BM. Identify the oxidation state of Fe and the nature of the complex.

Solution: √(n(n + 2)) = 5.92 gives n = 5. Five unpaired electrons means 3d⁵, so Fe³⁺, with no pairing. The complex is high spin and outer orbital (sp³d²), like [FeF₆]³⁻.

Worked example 5.8: Arrange in increasing spin-only moment: [MnCl₄]²⁻, [Fe(CN)₆]⁴⁻, [CoCl₄]²⁻, [Fe(CN)₆]³⁻, [Fe(H₂O)₆]²⁺.

Solution: Unpaired electrons: 5, 0, 3, 1, 4. Order: [Fe(CN)₆]⁴⁻ (0) < [Fe(CN)₆]³⁻ (1.73) < [CoCl₄]²⁻ (3.87) < [Fe(H₂O)₆]²⁺ (4.90) < [MnCl₄]²⁻ (5.92).

Quick revision

  • Hybrid orbitals of the metal accept ligand lone pairs; number of hybrids = CN.

  • sp³ tetrahedral; dsp² square planar; d²sp³ inner octahedral; sp³d² outer octahedral.

  • Strong ligands (CN⁻, CO) cause pairing: inner orbital, low spin.

  • Weak ligands (F⁻, Cl⁻, H₂O) usually do not: outer orbital, high spin.

  • μ = √(n(n + 2)) BM: 1.73, 2.83, 3.87, 4.90, 5.92 for n = 1 to 5.

  • d³ is always inner orbital; octahedral d⁸ is always outer orbital.

  • VBT cannot explain colour or the strength order of ligands.

NEET traps

  • Forgetting to find the oxidation state first. Fe in [Fe(CN)₆]³⁻ is +3, not +2.

  • Using 4s² electrons in the ion. Transition metal ions lose 4s electrons first: Fe²⁺ is 3d⁶, not 3d⁴ 4s².

  • Calling [NiCl₄]²⁻ square planar. It is tetrahedral and paramagnetic.

  • Assuming every NH₃ complex is low spin. [Ni(NH₃)₆]²⁺ is outer orbital with 2 unpaired electrons.

  • Mixing "inner" with "diamagnetic". [Fe(CN)₆]³⁻ is inner orbital but has one unpaired electron.

  • Treating Ni in [Ni(CO)₄] as Ni²⁺. It is Ni(0).

Practice MCQs: Chapter 5

Level 1: Concept check

1. The hybridisation of Ni in [Ni(CN)₄]²⁻ is (a) sp³ (b) dsp² (c) d²sp³ (d) sp³d²

2. An outer orbital octahedral complex of a 3d metal uses (a) nd orbitals (b) (n−1)d orbitals (c) only s and p orbitals (d) f orbitals

3. The spin-only magnetic moment of a species with 3 unpaired electrons is (a) 1.73 BM (b) 2.83 BM (c) 3.87 BM (d) 4.90 BM

4. The shape of sp³ hybridised [NiCl₄]²⁻ is (a) square planar (b) octahedral (c) linear (d) tetrahedral

5. Which complex is diamagnetic? (a) [Fe(CN)₆]⁴⁻ (b) [FeF₆]³⁻ (c) [CoF₆]³⁻ (d) [NiCl₄]²⁻

6. The hybridisation of Co in [Co(NH₃)₆]³⁺ is (a) sp³d² (b) dsp² (c) d²sp³ (d) sp³

7. The number of unpaired electrons in [FeF₆]³⁻ is (a) 1 (b) 3 (c) 4 (d) 5

8. dsp² hybridisation gives a (a) tetrahedral shape (b) square planar shape (c) octahedral shape (d) trigonal bipyramidal shape

9. Valence bond theory fails to explain the (a) shape of complexes (b) magnetic nature of complexes (c) colour of complexes (d) hybridisation of the metal

10. The oxidation state and hybridisation of Ni in [Ni(CO)₄] are (a) 0 and sp³ (b) +2 and dsp² (c) 0 and dsp² (d) +2 and sp³

Level 2: NEET standard

11. The spin-only magnetic moment of [Fe(CN)₆]³⁻ is (a) 5.92 BM (b) 1.73 BM (c) 0 BM (d) 3.87 BM

12. Which is an inner orbital complex? (a) [CoF₆]³⁻ (b) [Fe(H₂O)₆]²⁺ (c) [Fe(CN)₆]⁴⁻ (d) [Ni(NH₃)₆]²⁺

13. The hybridisation and number of unpaired electrons in [Ni(NH₃)₆]²⁺ are (a) d²sp³ and 0 (b) d²sp³ and 2 (c) sp³d² and 0 (d) sp³d² and 2

14. The spin-only magnetic moment of [MnCl₄]²⁻ is (a) 3.87 BM (b) 4.90 BM (c) 2.83 BM (d) 5.92 BM

15. [CoF₆]³⁻ is (a) inner orbital and diamagnetic (b) outer orbital and diamagnetic (c) outer orbital and paramagnetic with 4 unpaired electrons (d) inner orbital with 4 unpaired electrons

16. Which pair has the same hybridisation of the metal? (a) [Ni(CN)₄]²⁻ and [NiCl₄]²⁻ (b) [Fe(CN)₆]⁴⁻ and [Co(NH₃)₆]³⁺ (c) [CoF₆]³⁻ and [Co(NH₃)₆]³⁺ (d) [Ni(CO)₄] and [Ni(CN)₄]²⁻

17. A complex has a spin-only magnetic moment of 2.83 BM. The number of unpaired electrons is (a) 2 (b) 3 (c) 1 (d) 4

18. The hybridisation and spin-only moment of [Cr(NH₃)₆]³⁺ are (a) sp³d² and 3.87 BM (b) d²sp³ and 0 BM (c) dsp² and 3.87 BM (d) d²sp³ and 3.87 BM

19. Which complex is tetrahedral and paramagnetic? (a) [Ni(CO)₄] (b) [Ni(CN)₄]²⁻ (c) [CoCl₄]²⁻ (d) [Zn(NH₃)₄]²⁺

20. The number of unpaired electrons in [Mn(CN)₆]³⁻ is (a) 4 (b) 2 (c) 0 (d) 3

21. [NiCl₄]²⁻ is tetrahedral while [Ni(CN)₄]²⁻ is square planar because (a) Cl⁻ is weak and causes no pairing, so sp³ forms (b) Cl⁻ is a strong ligand (c) CN⁻ is a weak ligand (d) Ni has different oxidation states in the two

22. Which complex has the highest spin-only magnetic moment? (a) [Fe(CN)₆]⁴⁻ (b) [Fe(H₂O)₆]²⁺ (c) [Fe(CN)₆]³⁻ (d) [Co(NH₃)₆]³⁺

Level 3: Challenge

23. Arrange in increasing spin-only magnetic moment: I [Fe(CN)₆]³⁻, II [MnCl₄]²⁻, III [Fe(CN)₆]⁴⁻, IV [CoCl₄]²⁻ (a) III < I < IV < II (b) I < III < IV < II (c) III < IV < I < II (d) II < IV < I < III

24. Which cobalt(III) complex is diamagnetic? (a) [CoF₆]³⁻ (b) [Co(C₂O₄)₃]³⁻ (c) both (d) neither

25. The spin-only moment and hybridisation of [Ni(H₂O)₆]²⁺ are (a) 2.83 BM and d²sp³ (b) 0 BM and d²sp³ (c) 1.73 BM and sp³d² (d) 2.83 BM and sp³d²

26. An octahedral iron complex has a spin-only moment of 4.90 BM. It is most likely (a) [Fe(CN)₆]⁴⁻ (b) [Fe(CN)₆]³⁻ (c) [Fe(H₂O)₆]²⁺ (d) [FeF₆]³⁻

27. The number of unpaired electrons in square planar [Cu(NH₃)₄]²⁺ is (a) 1 (b) 0 (c) 2 (d) 3

28. The total number of unpaired electrons in [Ni(CN)₄]²⁻, [NiCl₄]²⁻ and [Ni(CO)₄] taken together is (a) 4 (b) 0 (c) 6 (d) 2

29. Assertion (A): [Fe(CN)₆]³⁻ is an inner orbital complex. Reason (R): CN⁻ is a strong ligand that pairs up the 3d electrons of Fe³⁺, freeing two 3d orbitals. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: [Ni(CN)₄]²⁻ is tetrahedral. Statement II: [Ni(CO)₄] is paramagnetic. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bCN⁻ pairs 3d⁸, one 3d free
2aOuter = nd orbitals
3c√15 = 3.87
4dsp³ is tetrahedral
5aFe²⁺ 3d⁶ fully paired by CN⁻
6cPaired 3d⁶ frees two 3d orbitals
7dFe³⁺ 3d⁵, no pairing
8bdsp² = square planar
9cColour needs CFT
10aNi(0) 3d¹⁰, sp³
11bOne unpaired electron
12cUses 3d orbitals (d²sp³)
13dd⁸ cannot free two 3d orbitals
14dMn²⁺ 3d⁵, n = 5
15csp³d², n = 4
16bBoth d²sp³
17a√8 = 2.83 gives n = 2
18dd³ always d²sp³; n = 3
19cCo²⁺ 3d⁷, sp³, n = 3
20bMn³⁺ 3d⁴ paired: ↑↓ ↑ ↑
21aWeak Cl⁻ gives sp³
22bn = 4, the largest here
23a0 < 1.73 < 3.87 < 5.92
24bOxalate complex is low spin
25dn = 2, outer orbital
26cn = 4: high-spin Fe²⁺
27aCu²⁺ is 3d⁹
28d0 + 2 + 0 = 2
29aPairing frees 3d orbitals
30bSquare planar; Ni(CO)₄ is diamagnetic

Chapter 5 revision sheet

One-page summary

  • In VBT, the metal mixes empty orbitals into hybrid orbitals; each hybrid accepts one lone pair from a ligand.

  • Number of hybrid orbitals = coordination number.

  • Steps: oxidation state → d count → decide pairing (strong or weak ligand) → pick empty orbitals → hybridisation → shape → unpaired electrons.

  • CN 4: sp³ (tetrahedral) or dsp² (square planar, uses one 3d orbital).

  • CN 6: d²sp³ uses inner (n−1)d orbitals, giving an inner orbital, low-spin complex.

  • CN 6: sp³d² uses outer nd orbitals, giving an outer orbital, high-spin complex.

  • Strong ligands (CN⁻, CO) force pairing; weak ligands (F⁻, Cl⁻, H₂O) usually do not.

  • d³ octahedral (Cr³⁺) is always inner orbital: two 3d orbitals are free without pairing.

  • Octahedral Ni²⁺ (d⁸) is always outer orbital: no two 3d orbitals can be emptied.

  • Unpaired electrons make a complex paramagnetic; all paired means diamagnetic.

  • Spin-only magnetic moment: μ = √(n(n + 2)) BM.

  • VBT cannot explain colour, cannot rank ligand strength, and does not distinguish weak and strong ligands quantitatively.

μspin-only=n(n+2) BM\mu_{\text{spin-only}} = \sqrt{n(n+2)}\ \text{BM}

Must-remember table

ComplexMetal ion (d count)HybridisationShapeUnpaired e⁻μ (BM)
[Co(NH₃)₆]³⁺Co³⁺ (d⁶)d²sp³Octahedral00
[CoF₆]³⁻Co³⁺ (d⁶)sp³d²Octahedral44.90
[Fe(CN)₆]³⁻Fe³⁺ (d⁵)d²sp³Octahedral11.73
[FeF₆]³⁻Fe³⁺ (d⁵)sp³d²Octahedral55.92
[Cr(NH₃)₆]³⁺Cr³⁺ (d³)d²sp³Octahedral33.87
[Ni(CN)₄]²⁻Ni²⁺ (d⁸)dsp²Square planar00
[NiCl₄]²⁻Ni²⁺ (d⁸)sp³Tetrahedral22.83
[Ni(CO)₄]Ni(0) (d¹⁰ after 4s → 3d)sp³Tetrahedral00

Memory aids

  • "1.73 to 5.92" ladder: n = 1, 2, 3, 4, 5 gives 1.73, 2.83, 3.87, 4.90, 5.92 BM; the first digit rises by one each step.

  • "Inner = In-pairs": inner orbital complexes are the ones where electrons pair up (low spin).

  • "Ni likes CN flat, Cl fat": [Ni(CN)₄]²⁻ is flat (square planar); [NiCl₄]²⁻ is the bulkier tetrahedron.

  • "Strong CO-CN pair up": CO and CN⁻ are the ligands that force pairing.

Concept connections

  • Hybridisation and shapes are from Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Electron configurations of ions and Hund's rule come from Chemistry Book 2: Atomic Structure.

  • Magnetic moments of transition-metal ions are also tested in Chemistry Book 11: d- and f-Block Elements.

Practice MCQs: Chapter 5, Level 4 (new NEET pattern)

31. Match List I (complex) with List II (hybridisation).

List I:

  • A. [Ni(CN)₄]²⁻

  • B. [NiCl₄]²⁻

  • C. [Fe(CN)₆]³⁻

  • D. [FeF₆]³⁻

List II:

  • (i) sp³d²

  • (ii) dsp²

  • (iii) sp³

  • (iv) d²sp³

(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-iii, C-ii, D-i

32. Match List I (complex) with List II (spin-only magnetic moment, BM).

List I:

  • A. [Cr(NH₃)₆]³⁺

  • B. [FeF₆]³⁻

  • C. [Fe(CN)₆]³⁻

  • D. [NiCl₄]²⁻

List II:

  • (i) 1.73

  • (ii) 2.83

  • (iii) 3.87

  • (iv) 5.92

(a) A-ii, B-iv, C-i, D-iii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iv, B-iii, C-i, D-ii

33. Match List I (complex) with List II (number of unpaired electrons).

List I:

  • A. [CoF₆]³⁻

  • B. [Mn(CN)₆]³⁻

  • C. [Co(NH₃)₆]³⁺

  • D. [CoCl₄]²⁻

List II:

  • (i) 0

  • (ii) 2

  • (iii) 3

  • (iv) 4

(a) A-iii, B-ii, C-i, D-iv (b) A-iv, B-iii, C-i, D-ii (c) A-ii, B-iv, C-i, D-iii (d) A-iv, B-ii, C-i, D-iii

34. Match List I (description) with List II (complex).

List I:

  • A. Inner orbital octahedral, diamagnetic

  • B. Outer orbital octahedral, paramagnetic

  • C. Tetrahedral, diamagnetic

  • D. Square planar, diamagnetic

List II:

  • (i) [Ni(CN)₄]²⁻

  • (ii) [Ni(CO)₄]

  • (iii) [CoF₆]³⁻

  • (iv) [Co(NH₃)₆]³⁺

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-ii, B-iii, C-iv, D-i

35. How many of the following statements are correct?

  • A. [Ni(CO)₄] is tetrahedral and diamagnetic.

  • B. [Fe(CN)₆]⁴⁻ is paramagnetic.

  • C. [CoF₆]³⁻ uses 4d orbitals in hybridisation.

  • D. VBT explains the colour of complexes.

  • E. [Cr(NH₃)₆]³⁺ is an inner orbital complex.

(a) 2 (b) 4 (c) 3 (d) 5

36. Choose the correct set of statements.

  • A. In [Ni(CN)₄]²⁻, two 3d electrons pair up to free one 3d orbital.

  • B. The spin-only moment of [NiCl₄]²⁻ is about 2.83 BM.

  • C. [Ni(NH₃)₆]²⁺ is an inner orbital complex.

  • D. Octahedral Ni²⁺ complexes are always outer orbital complexes.

(a) A, B and D only (b) A and C only (c) B and C only (d) A, B, C and D

37. How many of the following are paramagnetic: [Fe(CN)₆]³⁻, [Fe(CN)₆]⁴⁻, [CoF₆]³⁻, [Co(NH₃)₆]³⁺, [Ni(CO)₄], [NiCl₄]²⁻, [Zn(NH₃)₄]²⁺, [Cr(H₂O)₆]³⁺?

(a) 3 (b) 4 (c) 5 (d) 6

38. Choose the correct set of statements.

  • A. The spin-only moment of [Mn(CN)₆]³⁻ is about 2.83 BM.

  • B. [Zn(NH₃)₄]²⁺ is sp³ hybridised and diamagnetic.

  • C. [Co(C₂O₄)₃]³⁻ is an inner orbital, diamagnetic complex.

  • D. [CoF₆]³⁻ has three unpaired electrons.

(a) A and D only (b) B and D only (c) A, B, C and D (d) A, B and C only

39. A graph of spin-only magnetic moment (y) against number of unpaired electrons n (x) rises from 1.73 BM at n = 1 to 5.92 BM at n = 5. An octahedral complex X sits on this curve at 4.90 BM. X could be

(a) [Fe(CN)₆]³⁻ (b) [Cr(NH₃)₆]³⁺ (c) [CoF₆]³⁻ (d) [FeF₆]³⁻

40. Measured moments for four iron and chromium complexes are: P = [Fe(CN)₆]⁴⁻, 0 BM; Q = [FeF₆]³⁻, 5.9 BM; R = [Fe(CN)₆]³⁻, 1.7 BM; S = [Cr(H₂O)₆]³⁺, 3.9 BM. Which pair of hybridisations is correct?

(a) Q is sp³d² and R is d²sp³ (b) P is sp³d² and S is d²sp³ (c) Q is d²sp³ and R is sp³d² (d) P is sp³d² and Q is d²sp³

41. An orbital-box diagram shows a metal ion with four 3d orbitals each holding a pair of electrons, and one 3d, the 4s and two 4p orbitals each holding a ligand electron pair. One 4p orbital is empty. The diagram describes

(a) [NiCl₄]²⁻ (b) [Ni(CO)₄] (c) [Zn(NH₃)₄]²⁺ (d) [Ni(CN)₄]²⁻

Case for Q42–43: Fe³⁺ forms [Fe(H₂O)₆]³⁺ with a spin-only moment of 5.92 BM and [Fe(CN)₆]³⁻ with a spin-only moment of 1.73 BM.

42. The hybridisations of Fe in [Fe(H₂O)₆]³⁺ and [Fe(CN)₆]³⁻ are

(a) d²sp³ and sp³d² (b) sp³d² and d²sp³ (c) both sp³d² (d) both d²sp³

43. How many 3d orbitals of Fe are used in bonding in [Fe(CN)₆]³⁻?

(a) 0 (b) 1 (c) 2 (d) 3

44. The difference between the spin-only moments of [CoF₆]³⁻ and [Co(NH₃)₆]³⁺ is

(a) 4.90 BM (b) 3.87 BM (c) 2.83 BM (d) 0 BM

45. An octahedral Mn²⁺ complex has a spin-only moment of 1.73 BM. The complex and its hybridisation are

(a) [MnCl₄]²⁻, sp³ (b) [Mn(H₂O)₆]²⁺, sp³d² (c) [MnF₆]⁴⁻, sp³d² (d) [Mn(CN)₆]⁴⁻, d²sp³

Level 4 answer key

QAnsReason
31aCN⁻ gives dsp² and d²sp³; Cl⁻ gives sp³; F⁻ gives sp³d²
32cn = 3, 5, 1, 2 respectively
33dd⁶ high spin 4; d⁴ low spin 2; d⁶ low spin 0; tetrahedral d⁷ 3
34bMatch spin state and shape to each complex
35cA, C, E true; Fe²⁺ d⁶ with CN⁻ is diamagnetic; VBT cannot explain colour
36a[Ni(NH₃)₆]²⁺ is sp³d², outer orbital
37b[Fe(CN)₆]³⁻, [CoF₆]³⁻, [NiCl₄]²⁻, [Cr(H₂O)₆]³⁺
38d[CoF₆]³⁻ has four unpaired electrons
39c4.90 BM means n = 4: high-spin d⁶ Co³⁺
40a5 unpaired means outer orbital; 1 unpaired means inner orbital
41dd⁸ paired, one 3d + 4s + two 4p used: dsp², square planar
42b5 unpaired with H₂O (outer); 1 unpaired with CN⁻ (inner)
43cd²sp³ uses two 3d orbitals
44a4.90 − 0 = 4.90 BM
45dd⁵ with 1 unpaired needs strong-field CN⁻ and d²sp³
18 min left
‹
›