Chapter 5 of 12 · 17 min read

Chapter 3: IUPAC Nomenclature

What you will learn

  • How common (trivial) names differ from systematic IUPAC names.

  • The four parts of an IUPAC name: prefix, word root, primary suffix, secondary suffix.

  • How to pick the parent chain and number it.

  • The priority order of functional groups for polyfunctional compounds.

  • How to name alkyl groups, rings and simple benzene derivatives.

3.1 Trivial and IUPAC names

Early chemists named compounds after their source. Formic acid came from ants (Latin formica). Acetic acid came from vinegar (acetum). These trivial names are short but tell you nothing about structure.

IUPAC names are systematic. From the name you can draw exactly one structure, and from a structure you get exactly one name.

Trivial nameStructureIUPAC name
FormaldehydeHCHOMethanal
AcetaldehydeCH₃CHOEthanal
AcetoneCH₃COCH₃Propan-2-one (propanone)
Formic acidHCOOHMethanoic acid
Acetic acidCH₃COOHEthanoic acid
Ethyl alcoholCH₃CH₂OHEthanol
Isopropyl alcohol(CH₃)₂CHOHPropan-2-ol
AcetyleneHC≡CHEthyne
Methyl cyanideCH₃CNEthanenitrile
Diethyl etherC₂H₅OC₂H₅Ethoxyethane
ChloroformCHCl₃Trichloromethane
Isobutane(CH₃)₂CHCH₃2-Methylpropane
NeopentaneC(CH₃)₄2,2-Dimethylpropane

3.2 Parts of an IUPAC name

Name=prefixes+word root+primary suffix+secondary suffix\text{Name} = \text{prefixes} + \text{word root} + \text{primary suffix} + \text{secondary suffix}
  • Word root gives the number of carbons in the parent chain: meth (1), eth (2), prop (3), but (4), pent (5), hex (6), hept (7), oct (8), non (9), dec (10).

  • Primary suffix tells saturation: -ane (all single), -ene (C=C), -yne (C≡C).

  • Secondary suffix names the principal functional group: -ol, -al, -one, -oic acid and so on.

  • Prefixes name substituents and lower-priority groups, in alphabetical order.

Example: CH₂=CH–CH₂OH is prop + en + ol, written prop-2-en-1-ol. The "e" of "ene" is dropped before a vowel.

3.3 Alkyl groups

Remove one H from an alkane and you get an alkyl group.

GroupStructureNote
MethylCH₃–
EthylCH₃CH₂–
n-PropylCH₃CH₂CH₂–
Isopropyl(CH₃)₂CH–Attached at the middle carbon
n-ButylCH₃CH₂CH₂CH₂–
Isobutyl(CH₃)₂CHCH₂–
sec-ButylCH₃CH₂CH(CH₃)–Attached at a 2° carbon
tert-Butyl(CH₃)₃C–Attached at a 3° carbon
Neopentyl(CH₃)₃CCH₂–
Vinyl (ethenyl)CH₂=CH–
Allyl (prop-2-enyl)CH₂=CHCH₂–
PhenylC₆H₅–
BenzylC₆H₅CH₂–

3.4 Rules for open-chain compounds

  1. Find the principal functional group using the priority table in 3.5.

  2. Choose the parent chain. It must contain the carbon of the principal group. Among such chains, take the one with the most multiple bonds, then the longest. If two chains are equally long, take the one with more substituents.

  3. Number the chain so that the principal group gets the lowest locant. Then multiple bonds get the lowest locants. Then substituents get the lowest set of locants (first point of difference).

  4. If ene and yne tie, the double bond gets the lower number.

  5. If locants tie completely, the substituent first in alphabetical order gets the lower number.

  6. Write prefixes alphabetically. Ignore di-, tri-, tetra-, sec- and tert- when alphabetising. Iso and neo are part of the name and do count (isopropyl goes under i).

  7. Assemble the name: commas between numbers, hyphens between numbers and words, no spaces.

Figure 3.1 · IUPAC naming flowchart with a worked example
Figure 3.1 · IUPAC naming flowchart with a worked example

Follow the steps down the left; the right column applies each step to one molecule, ending at 4-hydroxypentan-2-one.

3.5 Priority table of functional groups

When a molecule has more than one functional group, the one highest in this list becomes the suffix. All others become prefixes.

PriorityClassSuffix (as principal group)Prefix (as substituent)
1Carboxylic acid, –COOH-oic acidcarboxy
2Sulphonic acid, –SO₃H-sulphonic acidsulpho
3Ester, –COORalkyl -oatealkoxycarbonyl
4Acid halide, –COX-oyl halidehalocarbonyl
5Amide, –CONH₂-amidecarbamoyl
6Nitrile, –CN-nitrilecyano
7Aldehyde, –CHO-alformyl or oxo
8Ketone, >C=O-oneoxo
9Alcohol, –OH-olhydroxy
10Amine, –NH₂-amineamino
11Alkene, C=C-ene–
12Alkyne, C≡C-yne–
always prefix–X, –NO₂, –OR, –Rnonehalo, nitro, alkoxy, alkyl

A quick memory line: acids, esters, halides, amides, nitriles, aldehydes, ketones, alcohols, amines. Ethers, halides (–X) and nitro groups never become the suffix.

When the carbon of –COOH, –CHO or –CN cannot be part of the chain (for example on a ring), the suffixes become -carboxylic acid, -carbaldehyde and -carbonitrile. So C₆H₁₁COOH is cyclohexanecarboxylic acid.

3.6 Rings and benzene derivatives

  • A carbon ring takes the prefix cyclo-: cyclopropane, cyclohexene, cyclopentanol.

  • In a ring, the principal group gets C1; then multiple bonds get the lowest numbers. Cyclohexene with an OH on the next carbon is cyclohex-2-en-1-ol.

  • Many benzene derivatives keep accepted names: toluene (C₆H₅CH₃), phenol (C₆H₅OH), aniline (C₆H₅NH₂), benzaldehyde (C₆H₅CHO), benzoic acid (C₆H₅COOH), anisole (C₆H₅OCH₃).

  • Two groups on a benzene ring: positions 1,2 = ortho (o-), 1,3 = meta (m-), 1,4 = para (p-). So p-nitrophenol is 4-nitrophenol and m-xylene is 1,3-dimethylbenzene.

3.7 Worked names

Worked example 3.1: Name CH₃CH(CH₃)CH₂CH(CH₃)CH₃.

Solution: Longest chain: 5 carbons, pentane. Methyls sit on C2 and C4 from either end. Name: 2,4-dimethylpentane.

Worked example 3.2: Name CH₃CH₂C(CH₃)₂CH(CH₃)CH₂CH₃.

Solution: Longest chain: 6 carbons, hexane. From the left, methyls are on 3, 3, 4. From the right they are on 3, 4, 4. At the first difference (second locant) 3 beats 4. Name: 3,3,4-trimethylhexane.

Worked example 3.3: Name CH₃CH₂CH(C₂H₅)CH₂CH(CH₃)CH₂CH₃.

Solution: Longest chain: 7 carbons, heptane. Substituents fall on 3 and 5 from either end, a full tie. Alphabetical order decides: ethyl comes before methyl, so ethyl gets 3. Name: 3-ethyl-5-methylheptane.

Worked example 3.4: Name CH₂=CH–CH₂–C≡CH and HC≡C–CH=CH–CH₃.

Solution: First compound: from the left the locants are ene 1, yne 4; from the right, yne 1, ene 4. Tie, so the double bond gets 1. Name: pent-1-en-4-yne. Second compound: from the left, yne 1 and ene 3 give {1, 3}; from the right, {2, 4}. Lowest set wins. Name: pent-3-en-1-yne.

Worked example 3.5: Name CH₃COCH₂CH₂CHO.

Solution: Aldehyde outranks ketone, so the suffix is -al and the CHO carbon is C1. Counting from it, the C=O is on C4. Name: 4-oxopentanal.

Worked example 3.6: Name CH₃CH(OH)CH₂COCH₃.

Solution: Ketone outranks alcohol. Number from the right so that C=O gets 2. Then OH is on C4. Name: 4-hydroxypentan-2-one.

Worked example 3.7: Name CH₃COCH₂COOH and HOCH₂CH(NH₂)COOH.

Solution: First: acid is principal, COOH carbon is C1, the C=O is on C3. Name: 3-oxobutanoic acid. Second: acid is principal; NH₂ on C2 and OH on C3. Alphabetical: amino before hydroxy. Name: 2-amino-3-hydroxypropanoic acid.

Worked example 3.8: Name CH₃CH₂CH(CHO)CH₂CH₃.

Solution: The chain must include the CHO carbon. The longest such chain is CHO–CH–CH₂–CH₃ (4 carbons) with an ethyl on C2. Name: 2-ethylbutanal. A tempting wrong answer is 3-formylpentane, which treats a principal group as a prefix.

Worked example 3.9: Name these: (i) CH₃CH₂COOCH₃ (ii) NC–CH₂CH₂–COOH (iii) (CH₃)₂CHCH₂CH₂Br (iv) CH₂=CH–CN.

Solution: (i) The acid part has 3 carbons (propanoate), the alcohol part is methyl: methyl propanoate. (ii) Acid outranks nitrile; COOH is C1, CN is on C3: 3-cyanopropanoic acid. (iii) Br is only a prefix; lowest locants put Br on 1 and methyl on 3: 1-bromo-3-methylbutane. (iv) The CN carbon is C1 and the double bond starts at C2: prop-2-enenitrile.

More names to practise reading

StructureIUPAC name
(CH₃)₃CCH₂OH2,2-Dimethylpropan-1-ol
CH₃CH(Cl)CH(CH₃)CH₂CH₃2-Chloro-3-methylpentane
CH₃CH=CHCH₂OHBut-2-en-1-ol
HOCH₂CH₂COOH3-Hydroxypropanoic acid
OHC–CH₂–CH₂–CHOButanedial
HOOC–COOHEthanedioic acid
CH₃CH(NH₂)COOH2-Aminopropanoic acid
CH₃OCH₂CH₃Methoxyethane
CH₃CONHCH₃N-Methylethanamide
CH₂=CHCOOHProp-2-enoic acid
CH₃CH(CH₃)CH₂CH(C₂H₅)CH₂CH₃4-Ethyl-2-methylhexane

Quick revision

  • Name = prefixes + word root + primary suffix + secondary suffix.

  • Parent chain must hold the principal group, then the most multiple bonds, then the most carbons.

  • Numbering order: principal group, then multiple bonds, then substituents (lowest set).

  • Ene and yne tie: double bond gets the lower number. Full tie: alphabetical order decides.

  • Priority: acid > sulphonic acid > ester > acid halide > amide > nitrile > aldehyde > ketone > alcohol > amine.

  • Halo, nitro and alkoxy are always prefixes.

  • di, tri, sec, tert are ignored in alphabetising; iso and neo are not.

NEET traps

  • Choosing the longest chain that skips the principal group's carbon (as in 3-formylpentane).

  • Numbering to give substituents low numbers before the principal group.

  • Writing "2-hydroxypentan-4-one". The ketone outranks OH and must get the lower number.

  • Alphabetising dimethyl under d. It goes under m.

  • Naming CH₃CH₂COOCH₃ as ethyl ethanoate. Read which side is the acid.

  • Forgetting that the aldehyde carbon of –CHO counts in the chain (butanal has four carbons, not three).

Practice MCQs: Chapter 3

Level 1: Concept check

1. The word root for a five-carbon parent chain is (a) but (b) hex (c) prop (d) pent

2. The secondary suffix for a ketone is (a) -al (b) -ol (c) -oic acid (d) -one

3. The IUPAC name of CH₃CH₂CH₂OH is (a) propan-1-ol (b) propan-2-ol (c) propanal (d) 1-propanone

4. Which group is always written as a prefix? (a) –OH (b) –CHO (c) –COOH (d) –NO₂

5. Which group has the highest priority for the suffix? (a) –OH (b) –CHO (c) –COOH (d) –NH₂

6. The IUPAC name of HCHO is (a) formaldehyde (b) methanol (c) methanal (d) ethanal

7. The tert-butyl group is (a) (CH₃)₃C– (b) (CH₃)₂CHCH₂– (c) CH₃CH₂CH(CH₃)– (d) (CH₃)₂CH–

8. The IUPAC name of acetic acid is (a) methanoic acid (b) propanoic acid (c) ethanoic acid (d) acetonic acid

9. The prefix for –CN when it is not the principal group is (a) nitro (b) amino (c) isocyano (d) cyano

10. The IUPAC name of CH₃OCH₃ is (a) ethoxymethane (b) methoxymethane (c) methoxyethane (d) dimethoxy

Level 2: NEET standard

11. The IUPAC name of (CH₃)₂CHCH₂CH(CH₃)₂ is (a) 1,1,3,3-tetramethylpropane (b) 2,2-dimethylpentane (c) 2,4,4-trimethylbutane (d) 2,4-dimethylpentane

12. The IUPAC name of CH₃CH=CHCH₂OH is (a) but-2-en-4-ol (b) but-3-en-1-ol (c) but-2-en-1-ol (d) 1-hydroxybut-2-ene

13. The IUPAC name of CH₂=CH–CH₂–C≡CH is (a) pent-1-en-4-yne (b) pent-4-en-1-yne (c) pent-1-yn-4-ene (d) pent-4-yn-1-ene

14. The IUPAC name of CH₃COCH₂CH₂CHO is (a) 2-oxopentanal (b) 4-oxopentanal (c) 5-oxopentan-2-one (d) 4-formylbutan-2-one

15. The IUPAC name of CH₃CH(OH)CH₂COCH₃ is (a) 2-hydroxypentan-4-one (b) 4-oxopentan-2-ol (c) 4-hydroxypentan-3-one (d) 4-hydroxypentan-2-one

16. The IUPAC name of HC≡C–CH=CH–CH₃ is (a) pent-2-en-4-yne (b) pent-1-yn-3-ene (c) pent-3-en-1-yne (d) pent-3-yn-1-ene

17. The IUPAC name of CH₃CH₂COOCH₃ is (a) ethyl ethanoate (b) propyl methanoate (c) methyl propanoate (d) methyl ethanoate

18. The IUPAC name of NC–CH₂CH₂–COOH is (a) 3-carboxypropanenitrile (b) 1-cyanopropanoic acid (c) 2-cyanopropanoic acid (d) 3-cyanopropanoic acid

19. The IUPAC name of (CH₃)₂CHCH₂CH₂Br is (a) 4-bromo-2-methylbutane (b) 1-bromo-2-methylbutane (c) 1-bromo-3,3-dimethylpropane (d) 1-bromo-3-methylbutane

20. The IUPAC name of CH₃CH₂CH(CHO)CH₂CH₃ is (a) 3-formylpentane (b) 2-ethylbutanal (c) 3-ethylbutanal (d) 1-ethylbutanal

21. The IUPAC name of CH₃CH₂CH(C₂H₅)CH₂CH(CH₃)CH₂CH₃ is (a) 5-ethyl-3-methylheptane (b) 3-methyl-5-ethylheptane (c) 2,4-diethylhexane (d) 3-ethyl-5-methylheptane

22. The IUPAC name of isobutyl alcohol, (CH₃)₂CHCH₂OH, is (a) butan-2-ol (b) 2-methylpropan-2-ol (c) 1-methylpropan-1-ol (d) 2-methylpropan-1-ol

Level 3: Challenge

23. The IUPAC name of CH₃COCH₂COOH is (a) 1-carboxypropan-2-one (b) 3-oxobutanoic acid (c) 2-oxobutanoic acid (d) butan-3-one-1-oic acid

24. The IUPAC name of HOCH₂CH(NH₂)COOH is (a) 2-amino-3-hydroxypropanoic acid (b) 3-hydroxy-2-aminopropanoic acid (c) 2-amino-1-hydroxypropanoic acid (d) 1-amino-2-hydroxypropanoic acid

25. The IUPAC name of CH₃CH₂C(CH₃)₂CH(CH₃)CH₂CH₃ is (a) 3,4,4-trimethylhexane (b) 3,3,4-trimethylhexane (c) 2-ethyl-3,3-dimethylpentane (d) 4-ethyl-3,3-dimethylpentane

26. A cyclohexene ring carries an –OH on the carbon right next to the C=C. Its IUPAC name is (a) cyclohex-1-en-3-ol (b) cyclohex-3-en-1-ol (c) cyclohex-2-en-1-ol (d) 3-hydroxycyclohexene

27. The IUPAC name of CH₂=CH–CN is (a) prop-1-en-3-nitrile (b) prop-2-enenitrile (c) prop-1-enenitrile (d) 1-cyanoethene

28. Which name follows IUPAC rules correctly? (a) 2-Ethylpentane (b) 3-Methylbut-3-ene (c) 2,2-Dimethylpropane (d) Pentan-4-one

29. Assertion (A): In CH₂=CH–CH₂–C≡CH, the double bond receives locant 1. Reason (R): When the ene and yne locants tie, the double bond gets the lower number. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In a molecule with both C=O (ketone) and –OH, the ketone is named as the suffix. Statement II: An –OCH₃ group can be named as the suffix when it is the only group present. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dpent = 5
2dKetone suffix is -one
3aOH on C1 of a 3-carbon chain
4dNitro is never a suffix
5cCarboxylic acid tops the table
6cOne carbon + -al
7aAttached through a 3° carbon
8cTwo carbons, -oic acid
9d–CN as substituent is cyano
10bAlkoxy prefix + parent alkane
11dFive-carbon chain, methyls on 2 and 4
12cOH gets 1, double bond starts at 2
13aTie broken in favour of the double bond
14bCHO is C1, C=O at C4
15dKetone outranks alcohol, gets locant 2
16cLowest set {1, 3} beats {2, 4}
17cPropanoic acid + methanol ester
18dCOOH is C1, CN on C3
19dBr on C1, methyl on C3
20bChain must include the CHO carbon
21dTie at 3, 5; ethyl first alphabetically
22dThree-carbon chain, OH on C1, methyl on C2
23bAcid C1, oxo on C3
24aAmino before hydroxy alphabetically
25b{3, 3, 4} beats {3, 4, 4}
26cOH gets C1, C=C then at 2
27bCN carbon is C1, C=C at 2
28cOthers have wrong chain or numbering
29aRule in R directly gives A
30cAlkoxy is always a prefix

Chapter 3 revision sheet

One-page summary

  • Trivial names come from sources (formic acid from ants, acetic acid from vinegar); IUPAC names come from structure.

  • IUPAC name = prefixes + word root + primary suffix (-ane, -ene, -yne) + secondary suffix (principal group).

  • Word roots: meth 1, eth 2, prop 3, but 4, pent 5, hex 6, hept 7, oct 8, non 9, dec 10.

  • Parent chain: the longest chain that holds the principal group and the most multiple bonds; on a tie, the chain with more substituents.

  • Numbering: lowest locant to the principal group, then to multiple bonds, then to substituents (first point of difference).

  • On a tie between ene and yne, the double bond takes the lower number.

  • Substituent prefixes go in alphabetical order. di, tri, tetra, sec and tert are ignored; iso and neo are counted.

  • Seniority: acid > anhydride > ester > acid halide > amide > nitrile > aldehyde > ketone > alcohol > amine.

  • Halo (–X), nitro (–NO₂) and alkoxy (–OR) are always prefixes, never suffixes.

  • When the carbon of –CHO, –COOH or –CN is in the chain: -al, -oic acid, -nitrile. When attached to a ring: -carbaldehyde, -carboxylic acid, -carbonitrile.

  • Esters: alkyl (from the alcohol) + alkanoate (from the acid): CH₃COOC₂H₅ is ethyl ethanoate.

  • Benzene derivatives: 1,2 = ortho, 1,3 = meta, 1,4 = para.

Must-remember table

GroupAs suffixAs prefix
–COOH-oic acidcarboxy
–COOR-oatealkoxycarbonyl
–COX-oyl halidehalocarbonyl
–CONH₂-amidecarbamoyl
–CN-nitrilecyano
–CHO-alformyl (or oxo)
>C=O-oneoxo
–OH-olhydroxy
–NH₂-amineamino
–X, –NO₂, –ORneverhalo, nitro, alkoxy

Memory aids

  • "All Angry Elephants Hate Ants, Not Always Kind At All": Acid, Anhydride, Ester, Halide (acid halide), Amide, Nitrile, Aldehyde, Ketone, Alcohol, Amine: the seniority order.

  • "Monkeys Eat Peeled Bananas": Meth (1), Eth (2), Prop (3), But (4); from five onwards the Greek counts (pent, hex …).

  • "HNA are never at the end": Halo, Nitro, Alkoxy groups are always prefixes.

  • "O-M-P = 2-3-4": ortho is 1,2; meta is 1,3; para is 1,4.

  • "Dee and Tee don't count, Iso does": di and tert are ignored in alphabetising; iso is not.

Concept connections

  • Naming alkenes, alkynes and benzene derivatives is applied throughout Chemistry Book 15: Hydrocarbons.

  • Names of alcohols, aldehydes, ketones and acids return in Chemistry Book 17: Organic Compounds Containing Oxygen.

  • Amines, amides and nitriles are named the same way in Chemistry Book 18: Organic Compounds Containing Nitrogen.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (compound) with List II (IUPAC name).

  • A. CH₃CH₂CH₂CHO

  • B. CH₃COCH₂CH₃

  • C. CH₃CH₂COOCH₃

  • D. CH₃CH₂CN

  • (i) Methyl propanoate

  • (ii) Butanal

  • (iii) Propanenitrile

  • (iv) Butan-2-one

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-i, D-iii

32. Match List I (alkyl group) with List II (structure).

  • A. Isopropyl

  • B. sec-Butyl

  • C. Isobutyl

  • D. tert-Butyl

  • (i) CH₃CH₂CH(CH₃)–

  • (ii) (CH₃)₃C–

  • (iii) (CH₃)₂CH–

  • (iv) (CH₃)₂CHCH₂–

(a) A-iii, B-i, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-ii, C-iv, D-i

33. Match List I (principal group) with List II (suffix).

  • A. –COOH

  • B. –CONH₂

  • C. –CN

  • D. –OH

  • (i) -amide

  • (ii) -nitrile

  • (iii) -ol

  • (iv) -oic acid

(a) A-iv, B-ii, C-i, D-iii (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-i, C-ii, D-iii (d) A-iv, B-i, C-iii, D-ii

34. Match List I (group, not principal) with List II (prefix).

  • A. –CHO

  • B. –OH

  • C. –NH₂

  • D. >C=O in a chain

  • (i) hydroxy

  • (ii) oxo

  • (iii) formyl

  • (iv) amino

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii

35. How many of the following statements are correct?

  • A. The multiplying prefix "di" is ignored when substituents are put in alphabetical order.

  • B. The prefix "iso" is ignored when substituents are put in alphabetical order.

  • C. Halo and nitro groups are always written as prefixes.

  • D. HCOOCH₂CH₃ is ethyl methanoate.

  • E. When –CHO is attached to a ring, the suffix -carbaldehyde is used.

(a) 4 (b) 3 (c) 2 (d) 5

36. Choose the correct set of names.

  • A. CH₂=CH–CH₂–C≡CH is pent-1-en-4-yne.

  • B. HC≡C–CH₂–CH=CH₂ is pent-4-en-1-yne.

  • C. CH₃CH(OH)CH₂CHO is 3-hydroxybutanal.

  • D. CH₃COCH₂COOH is 3-oxobutanoic acid.

(a) A and B only (b) B, C and D only (c) A, C and D only (d) C and D only

37. How many of the following names are correct?

  • A. (CH₃)₂CHCH₂CH₃: 2-methylbutane

  • B. CH₃CH₂CH(CH₃)CH₂CH₃: 3-methylpentane

  • C. ClCH₂CH₂Cl: 1,2-dichloroethane

  • D. (CH₃)₃CCH₂OH: 2,2-dimethylpropan-1-ol

  • E. CH₃CH(Cl)CH₂CH₃: 3-chlorobutane

(a) 2 (b) 3 (c) 5 (d) 4

38. Choose the correct set of seniority statements (higher group first).

  • A. Carboxylic acid > ester > amide > nitrile

  • B. Ketone > aldehyde

  • C. Alcohol > amine

  • D. Amide > acid halide

(a) A and B only (b) A and C only (c) A, C and D only (d) B and D only

39. A student's naming worksheet is shown.

StructureName written
CH₃CH₂CH(CH₃)CHO2-methylbutanal
CH₃CH(Br)CH₂CH₃2-bromobutane
(CH₃)₂C(OH)CH₂CH₃2-methylbutan-2-ol
CH₂=CHCH₂OHprop-1-en-3-ol

How many names in the worksheet are correct?

(a) 1 (b) 2 (c) 3 (d) 4

40. A diagram shows a benzene ring with –COOH on one ring carbon and –Cl on the ring carbon two positions away (a 1,3 relationship). Its IUPAC name is:

(a) 1-chloro-3-carboxybenzene (b) 2-chlorobenzoic acid (c) 4-chlorobenzoic acid (d) 3-chlorobenzoic acid

41. A naming flowchart has four steps: (1) pick the principal group, (2) choose the parent chain, (3) number it, (4) write prefixes in alphabetical order. For HOCH₂CH₂COCH₃, the correct result of step 1 and the final name are:

(a) Ketone is principal; 4-hydroxybutan-2-one (b) Alcohol is principal; 3-oxobutan-1-ol (c) Both are suffixes; butan-1-ol-3-one (d) Ketone is principal; 1-hydroxybutan-3-one

Passage for Q42–43: A sports drink label lists alanine, CH₃–CH(NH₂)–COOH, an amino acid. A chemist also makes its methyl ester, CH₃–CH(NH₂)–COOCH₃, as a lab intermediate.

42. The IUPAC name of alanine is:

(a) 3-aminopropanoic acid (b) 2-aminopropanoic acid (c) 2-carboxyethanamine (d) 1-aminopropanoic acid

43. The IUPAC name of the methyl ester is:

(a) Methyl 2-aminopropanoate (b) 2-Aminopropyl methanoate (c) Methyl 3-aminopropanoate (d) 2-Aminopropanoic methyl ester

44. The IUPAC name of CH₃–CH(CH₃)–CH(CH₂CH₃)–CH₂–CH₃ is:

(a) 2-Methyl-3-ethylpentane (b) 3-Ethyl-4-methylpentane (c) 3-Isopropylpentane (d) 3-Ethyl-2-methylpentane

45. The IUPAC name of CH₃–CH=CH–CO–CH₃ is:

(a) Pent-2-en-4-one (b) Pent-3-en-2-one (c) 2-Oxopent-3-ene (d) Pent-3-en-4-one

Level 4 answer key

QAnsReason
31dButanal, butan-2-one, methyl propanoate, propanenitrile
32aIsopropyl (CH₃)₂CH–; sec-butyl CH₃CH₂CH(CH₃)–; isobutyl (CH₃)₂CHCH₂–; tert-butyl (CH₃)₃C–
33c-oic acid, -amide, -nitrile, -ol
34bformyl, hydroxy, amino, oxo
35aA, C, D, E true; iso is counted in alphabetical order
36cB is the same molecule as A; on a 1,4 tie the double bond gets the lower number
37dE should be 2-chlorobutane; the other four are right
38bAldehyde outranks ketone; acid halide outranks amide
39cLast one should be prop-2-en-1-ol (–OH gets the lowest locant)
40d–COOH carbon is C1 of benzoic acid; Cl at C3
41aKetone outranks alcohol; numbering from the CH₃ end gives C=O at 2, OH at 4
42bCOOH carbon is C1, so NH₂ sits on C2
43aEster outranks amine: methyl + 2-aminopropanoate
44dBoth five-carbon chains tie; take the one with two substituents; ethyl before methyl alphabetically
45bNumber from the C=O end: C=O at 2, C=C at 3
17 min left
‹
›