Chapter 5 of 10 · 22 min read

Chapter 3: Amino Acids and the Peptide Bond

What you will learn

  • The general structure of an α-amino acid and why most are chiral.

  • How amino acids are classified as neutral, acidic or basic, and as essential or non-essential.

  • Why amino acids exist as zwitterions and behave like salts.

  • What the isoelectric point means and how charge changes with pH.

  • How the peptide bond forms, and how to count bonds, water and molar mass in peptides.

3.1 The α-amino acid

Proteins are built from small units called α-amino acids. Each has an amino group (–NH₂) and a carboxyl group (–COOH) on the same carbon. That carbon, next to the –COOH, is the α-carbon.

R−C∣NH2H−COOH\mathrm{R-\underset{NH_2}{\underset{|}{C}}H-COOH}

The α-carbon also carries an H and a side chain R. Only R changes from one amino acid to the next. About 20 different α-amino acids appear in the proteins of living things.

Chirality. When R is not H, the α-carbon has four different groups, so it is chiral. Glycine (R = H) is the only common one that is optically inactive. The amino acids in natural proteins have the L-configuration.

Names are shortened to three letters (Gly, Ala) or one letter (G, A).

NameCodeSide chain RType
GlycineGly, G–HNeutral, non-essential
AlanineAla, A–CH₃Neutral, non-essential
ValineVal, V–CH(CH₃)₂Neutral, essential
LeucineLeu, L–CH₂CH(CH₃)₂Neutral, essential
IsoleucineIle, I–CH(CH₃)CH₂CH₃Neutral, essential
SerineSer, S–CH₂OHNeutral, non-essential
ThreonineThr, T–CH(OH)CH₃Neutral, essential
CysteineCys, C–CH₂SHNeutral, non-essential
MethionineMet, M–CH₂CH₂SCH₃Neutral, essential
PhenylalaninePhe, F–CH₂C₆H₅Neutral, essential
TyrosineTyr, Y–CH₂C₆H₄OH (para)Neutral, non-essential
TryptophanTrp, WIndole-containingNeutral, essential
ProlinePro, PRing joined back to NNeutral, non-essential
Aspartic acidAsp, D–CH₂COOHAcidic, non-essential
Glutamic acidGlu, E–CH₂CH₂COOHAcidic, non-essential
LysineLys, K–(CH₂)₄NH₂Basic, essential
ArginineArg, RContains a guanidino groupBasic, essential*
HistidineHis, HContains an imidazole ringBasic, essential*

*NCERT lists arginine and histidine among the ten essential amino acids, so NEET follows that list. Note three details. Proline's N sits inside a ring, so it is strictly an imino acid. Cysteine and methionine contain sulphur. Isoleucine and threonine each have a second chiral carbon in R.

3.2 Classification by side chain

The balance of acidic and basic groups decides the class.

ClassCount of groupsExamples
NeutralOne –NH₂, one –COOHGlycine, alanine, valine, leucine, serine
AcidicMore –COOH than –NH₂Aspartic acid, glutamic acid
BasicMore –NH₂ (or other basic N) than –COOHLysine, arginine, histidine

3.3 Essential and non-essential amino acids

Our body can make some amino acids itself. These are non-essential. The rest must come from food. These are essential amino acids.

The ten essential ones, as NEET expects: valine, leucine, isoleucine, threonine, methionine, phenylalanine, tryptophan, lysine, arginine and histidine. A handy line to remember them: “PVT TIM HALL” (Phe, Val, Thr, Trp, Ile, Met, His, Arg, Leu, Lys).

This is why a mixed diet matters. Cereals are low in lysine; pulses are low in methionine. Dal with rice or roti together gives a fuller set than either alone.

3.4 Zwitterions

In an amino acid, the –COOH is acidic and the –NH₂ is basic. Inside the same molecule, the acid gives its proton to the base.

H2N−CHR−COOH⇌H3N+−CHR−COO−\mathrm{H_2N-CHR-COOH \rightleftharpoons H_3\overset{+}{N}-CHR-COO^-}

The product has a + charge and a − charge but is neutral overall. Such a dipolar ion is called a zwitterion (German zwitter = hybrid).

The zwitterion explains the salt-like behaviour of amino acids:

  • They are colourless crystalline solids with high melting points (they usually decompose on melting).

  • They dissolve well in water but poorly in non-polar solvents.

  • They have large dipole moments.

  • They are amphoteric: they react with both acids and bases.

3.5 Isoelectric point (basic idea)

The charge on an amino acid depends on the pH of the solution.

H3N+CHRCOOHlow pH: cation  ⇌H+OH−  H3N+CHRCOO−zwitterion  ⇌H+OH−  H2NCHRCOO−high pH: anion\underset{\text{low pH: cation}}{\mathrm{H_3\overset{+}{N}CHRCOOH}} \;\overset{OH^-}{\underset{H^+}{\rightleftharpoons}}\; \underset{\text{zwitterion}}{\mathrm{H_3\overset{+}{N}CHRCOO^-}} \;\overset{OH^-}{\underset{H^+}{\rightleftharpoons}}\; \underset{\text{high pH: anion}}{\mathrm{H_2NCHRCOO^-}}
  • In strong acid, the –COO⁻ picks up H⁺. The ion is a cation and moves to the cathode in an electric field.

  • In strong base, the –NH₃⁺ loses H⁺. The ion is an anion and moves to the anode.

  • At one particular pH, the zwitterion dominates and the net charge is zero. It moves to neither electrode. This pH is the isoelectric point (pI).

Amino acid typeApproximate pIExample
NeutralAbout 5.5 to 6.5Glycine about 6.0
AcidicAbout 3Aspartic acid, glutamic acid
BasicAbout 7.5 to 11Lysine about 9.7

A simple rule: if the solution pH is below the pI, the amino acid is positive. If the pH is above the pI, it is negative. Amino acids are least soluble at their pI, which is used to separate them.

3.6 The peptide bond

The –COOH of one amino acid reacts with the –NH₂ of another. Water is lost and an amide link, –CO–NH–, forms. In proteins this amide link is called the peptide bond.

H2N−CH2−COOH+H2N−CH(CH3)−COOH⟶H2N−CH2−CO−NH−CH(CH3)−COOH+H2O\mathrm{H_2N-CH_2-COOH + H_2N-CH(CH_3)-COOH \longrightarrow H_2N-CH_2-CO-NH-CH(CH_3)-COOH + H_2O}

The product above is glycylalanine, written Gly-Ala.

Figure 3.1 · Formation of the peptide bond in Gly-Ala
Figure 3.1 · Formation of the peptide bond in Gly-Ala

The –OH of glycine's carboxyl and one H of alanine's amino group leave as water; what remains joins as –CO–NH–.

Rules for writing peptides:

  • The amino acid with the free –NH₂ is the N-terminal residue; it is written on the left.

  • The one with the free –COOH is the C-terminal residue; it is written on the right.

  • Gly-Ala and Ala-Gly are different compounds. Order matters.

The peptide bond is planar. The C–N bond has partial double-bond character because the N lone pair is shared with the C=O. That rigidity shapes how chains fold (Chapter 4).

3.7 Peptides, polypeptides and proteins

NameAmino acid residues
Dipeptide2
Tripeptide3
OligopeptideA few (up to about 10)
PolypeptideMore than 10
ProteinPolypeptide with more than about 100 residues and molar mass above 10 000 u

The line between a large polypeptide and a small protein is not sharp. Insulin, with 51 residues in two chains, is usually called a protein hormone.

Counting rules for a linear chain of n amino acids:

peptide bonds=n−1,water lost=n−1\text{peptide bonds} = n - 1, \qquad \text{water lost} = n - 1
Mpeptide=∑Mamino acids−18(n−1)M_{\text{peptide}} = \sum M_{\text{amino acids}} - 18(n - 1)

The number of different peptides from k different amino acids, each used once, in a chain of length k is k!. If any amino acid may repeat, a chain of length n from k kinds gives kⁿ sequences.

3.8 Worked examples

Worked example 3.1: Classify alanine, lysine and glutamic acid as neutral, acidic or basic, and as essential or non-essential.

Solution: Alanine (R = –CH₃) has one –NH₂ and one –COOH: neutral, non-essential. Lysine has an extra –NH₂ in R: basic, essential. Glutamic acid has an extra –COOH in R: acidic, non-essential.

Worked example 3.2: Why is glycine optically inactive while alanine is optically active?

Solution: In glycine the α-carbon carries two H atoms, so it has only three different groups. It has a plane of symmetry and is achiral. In alanine the α-carbon carries H, CH₃, NH₂ and COOH, four different groups. It is chiral.

Worked example 3.3: Find the molar mass of the dipeptide Gly-Ala. (Gly = 75, Ala = 89 g mol⁻¹.)

Solution: One peptide bond forms and one water is lost.

M=75+89−18=146 g mol−1M = 75 + 89 - 18 = 146\ \text{g mol}^{-1}

Worked example 3.4: A linear polypeptide has 51 amino acid residues. How many peptide bonds does it contain, and what mass of water (per mole of peptide) was removed in forming it?

Solution: Peptide bonds = 51 − 1 = 50. Water lost = 50 mol per mole of peptide = 50 × 18 = 900 g.

Worked example 3.5: Write every tripeptide that contains glycine, alanine and valine, each used once.

Solution: The number is 3! = 6. They are Gly-Ala-Val, Gly-Val-Ala, Ala-Gly-Val, Ala-Val-Gly, Val-Gly-Ala and Val-Ala-Gly. Each is a different compound because the N- and C-terminal residues differ.

Worked example 3.6: Glycine has pI about 6.0. In an electric field, where does it move at pH 2, pH 6 and pH 11?

Solution: At pH 2 (below pI) it is the cation H₃N⁺CH₂COOH and moves to the cathode. At pH 6 it is the zwitterion with zero net charge and does not move. At pH 11 (above pI) it is the anion H₂NCH₂COO⁻ and moves to the anode.

Worked example 3.7: Glycine (M = 75) melts with decomposition above 500 K. Propanoic acid (M = 74) melts near 252 K. Explain the difference.

Solution: Solid glycine is made of zwitterions, H₃N⁺CH₂COO⁻. Neighbouring ions attract strongly, as in a salt crystal. Propanoic acid molecules are held only by hydrogen bonds and weaker forces. Ionic attractions need far more energy to break.

Worked example 3.8: A synthetic polypeptide is made only of alanine (M = 89 g mol⁻¹). Its molar mass is 7118 g mol⁻¹. How many alanine residues does it have?

Solution: Each residue inside the chain contributes 89 − 18 = 71. The two chain ends together keep one extra H₂O (18).

71n+18=7118  ⇒  n=710071=10071n + 18 = 7118 \;\Rightarrow\; n = \frac{7100}{71} = 100

Quick revision

  • α-Amino acid: –NH₂ and –COOH on the same carbon; R decides identity.

  • About 20 amino acids in proteins; all L, all chiral except glycine.

  • Neutral, acidic (Asp, Glu) and basic (Lys, Arg, His) by group count.

  • Ten essential amino acids (NCERT): Val, Leu, Ile, Thr, Met, Phe, Trp, Lys, Arg, His.

  • Zwitterion H₃N⁺–CHR–COO⁻ explains high melting point, water solubility and amphoteric nature.

  • Isoelectric point: net charge zero, no migration; below pI positive, above pI negative.

  • Peptide bond –CO–NH– forms by condensation; n residues → n − 1 bonds and n − 1 water.

  • Protein: more than about 100 residues, molar mass above 10 000 u.

NEET traps

  • Saying “all amino acids are optically active”. Glycine is not.

  • Writing a peptide right to left. The N-terminal residue always comes first.

  • Treating Gly-Ala and Ala-Gly as the same compound.

  • Counting n peptide bonds for n residues instead of n − 1.

  • Forgetting arginine and histidine on the NCERT essential list.

  • Thinking the zwitterion is charged overall. Its net charge is zero.

Practice MCQs: Chapter 3

Level 1: Concept check

1. Which amino acid is optically inactive? (a) Alanine (b) Valine (c) Serine (d) Glycine

2. A peptide bond is (a) –CO–O– (b) –CO–NH– (c) –C–O–C– (d) –NH–NH–

3. About how many different α-amino acids occur in natural proteins? (a) 20 (b) 10 (c) 64 (d) 26

4. Which is an essential amino acid? (a) Glycine (b) Alanine (c) Lysine (d) Glutamic acid

5. An amino acid molecule carrying both + and − charges, but neutral overall, is called a (a) zwitterion (b) carbocation (c) free radical (d) carbanion

6. Which is an acidic amino acid? (a) Lysine (b) Alanine (c) Arginine (d) Aspartic acid

7. In which amino acid is the side chain R = –CH₃? (a) Glycine (b) Serine (c) Alanine (d) Cysteine

8. Formation of a peptide bond is a (a) addition reaction (b) condensation reaction (c) oxidation (d) hydration

9. Which amino acid contains sulphur? (a) Serine (b) Valine (c) Threonine (d) Methionine

10. At its isoelectric point, an amino acid in an electric field (a) moves to the cathode (b) moves to the anode (c) does not move to either electrode (d) is fully un-ionised

Level 2: NEET standard

11. How many peptide bonds does a linear decapeptide contain? (a) 10 (b) 9 (c) 11 (d) 8

12. The molar mass of Gly-Ala (Gly = 75, Ala = 89 g mol⁻¹) is (a) 164 g mol⁻¹ (b) 182 g mol⁻¹ (c) 146 g mol⁻¹ (d) 128 g mol⁻¹

13. In a solution of pH 1, glycine exists mainly as (a) H₂NCH₂COO⁻, moving to the anode (b) H₃N⁺CH₂COO⁻, not moving (c) H₂NCH₂COOH, not moving (d) H₃N⁺CH₂COOH, moving to the cathode

14. The high melting points and water solubility of amino acids are due to their (a) dipolar (zwitterionic) salt-like structure (b) high molar masses (c) optical activity (d) peptide bonds

15. Which is a basic amino acid? (a) Glutamic acid (b) Arginine (c) Serine (d) Glycine

16. Essential amino acids are those which (a) the body makes in large amounts (b) occur in every protein (c) must be supplied through the diet (d) are optically inactive

17. Gly-Ala and Ala-Gly are (a) identical (b) different dipeptides (c) enantiomers (d) anomers

18. In the tripeptide Ala-Gly-Val, the N-terminal residue is (a) Gly (b) Val (c) all three equally (d) Ala

19. As NCERT defines it, a protein is a polypeptide with (a) more than about 100 residues and molar mass above 10 000 u (b) exactly 20 residues (c) fewer than 10 residues (d) only essential amino acids

20. Amino acids are amphoteric because they (a) contain both an acidic and a basic group (b) are optically active (c) are crystalline (d) are soluble in water

21. At pH 12, glycine migrates towards the (a) cathode (b) neither electrode (c) anode (d) both electrodes in turn

22. Which amino acid has two chiral carbon atoms? (a) Glycine (b) Alanine (c) Serine (d) Threonine

Level 3: Challenge

23. How many different tripeptides can be made from glycine, alanine and valine if each is used exactly once in each tripeptide? (a) 3 (b) 9 (c) 6 (d) 27

24. How many tripeptide sequences are possible from glycine, alanine and valine if repetition is allowed? (a) 27 (b) 6 (c) 9 (d) 18

25. Given Gly = 75, Ala = 89 and Val = 117 g mol⁻¹, the molar mass of Gly-Ala-Val is (a) 281 g mol⁻¹ (b) 263 g mol⁻¹ (c) 227 g mol⁻¹ (d) 245 g mol⁻¹

26. A polypeptide made only of alanine (89 g mol⁻¹) has molar mass 7118 g mol⁻¹. The number of residues is (a) 80 (b) 100 (c) 99 (d) 101

27. At pH 7, the main form of glutamic acid carries a net charge of (a) −1 (b) 0 (c) +1 (d) −2

28. Which statement is correct? (a) All 20 protein amino acids are optically active (b) Lysine has its isoelectric point below 7 (c) In proline the nitrogen is part of a ring, so it is an imino acid (d) A peptide bond forms without loss of water

29. Assertion (A): Amino acids have high melting points and dissolve well in water. Reason (R): In the solid state amino acids exist as zwitterions held by strong ionic attractions. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Glycine is the only common α-amino acid without a chiral carbon. Statement II: Arginine and histidine are acidic amino acids. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dR = H; α-carbon is not chiral.
2bPeptide bond is an amide link.
3aAbout 20 standard amino acids.
4cLysine cannot be made in the body.
5aDipolar ion = zwitterion.
6dExtra –COOH in its side chain.
7cAlanine is 2-aminopropanoic acid.
8bWater is eliminated.
9dMethionine has –SCH₃ in R.
10cNet charge is zero at pI.
11bn − 1 = 9.
12c75 + 89 − 18 = 146.
13dBelow pI the cation forms and goes to the cathode.
14aIonic attractions between zwitterions.
15bArginine has a basic guanidino group.
16cBody cannot synthesise them.
17bOrder of residues differs.
18dN-terminal is written first.
19aNCERT working definition.
20a–COOH and –NH₂ in one molecule.
21cAbove pI it is an anion.
22dThreonine has chiral α- and β-carbons.
23c3! = 6.
24a3³ = 27.
25d75 + 89 + 117 − 2 × 18 = 245.
26b(7118 − 18)/71 = 100.
27aBoth –COOH ionised, one –NH₃⁺: net −1.
28cProline's N is a secondary amine in a ring.
29aIonic lattice explains both properties.
30cArg and His are basic, not acidic.

Chapter 3 revision sheet

One-page summary

  • α-Amino acid: –NH₂ and –COOH on the same (α) carbon; general formula R–CH(NH₂)–COOH. The side chain R decides the amino acid.

  • About 20 amino acids build proteins. All are chiral except glycine (R = H); natural ones have the L-configuration.

  • Neutral: equal –NH₂ and –COOH groups (Gly, Ala, Val). Acidic: extra –COOH (Asp, Glu). Basic: extra basic group (Lys, Arg, His).

  • Essential amino acids must come from food. NCERT lists ten: Val, Leu, Ile, Thr, Met, Phe, Trp, Lys, Arg, His.

  • In water and in crystals an amino acid exists as a zwitterion, H₃N⁺–CHR–COO⁻.

  • Zwitterions explain the high melting points, water solubility, poor solubility in organic solvents and amphoteric behaviour.

  • In acid the zwitterion gains H⁺ and becomes a cation; in base it loses H⁺ and becomes an anion.

  • Isoelectric point (pI): pH at which net charge is zero and the amino acid does not move in an electric field.

  • pH below pI → net positive → moves to cathode. pH above pI → net negative → moves to anode.

  • Peptide bond: –CO–NH– amide link formed between –COOH of one amino acid and –NH₂ of the next, with loss of water.

  • The peptide unit is planar; the C–N bond has partial double-bond character.

  • Peptides are written from the N-terminal (free –NH₂, left) to the C-terminal (free –COOH, right). Gly-Ala and Ala-Gly are different.

  • Dipeptide (2), tripeptide (3), polypeptide (many). Protein: usually more than about 100 residues, molar mass above 10 000 u.

  • Linear chain of n residues: n − 1 peptide bonds; molar mass = sum of amino acid masses − 18(n − 1).

Must-remember table

QuantityRule or value
Peptide bonds in one chain of n residuesn − 1
Peptide bonds in k chains, N residues in allN − k
Mass of a linear peptideΣM(amino acids) − 18(n − 1)
Sequences from n different amino acids, each oncen!
Polyglycine of n residues57n + 18
Masses (g mol⁻¹)Gly 75, Ala 89, Val 117, Leu 131, Phe 165
pI of glycineabout 6.0

Memory aids

  • "Very Little Inside The Mess Prevents The Lazy Angry Hostel-boy": Val, Leu, Ile, Thr, Met, Phe, Trp, Lys, Arg, His (the ten essential amino acids).

  • "Acid Gives Extra COOH": the two acidic ones start with A and G sounds: Aspartic and Glutamic.

  • "LAH is basic": Lysine, Arginine, Histidine are the basic amino acids.

  • "Below pI, Positive; Above pI, Anion": the charge follows the side of pI the pH sits on.

  • "n minus one, water done": n residues need n − 1 peptide bonds and release n − 1 water molecules.

Concept connections

  • Amide formation and the basicity of –NH₂ come from Chemistry Book 18: Organic Compounds Containing Nitrogen.

  • Acids, bases, pH and buffers behind the isoelectric point are in Chemistry Book 6: Equilibrium.

  • Essential amino acids in diet and protein digestion link to Biology Book 5: Human Physiology.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (amino acid) with List II (description).

List I:

  • A. Glycine

  • B. Lysine

  • C. Glutamic acid

  • D. Phenylalanine

List II:

  • (i) Acidic amino acid

  • (ii) Achiral, R = H

  • (iii) Essential amino acid with an aromatic side chain

  • (iv) Basic amino acid

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-iv, C-i, D-ii

32. Glycine has a pI of about 6.0. Match List I (condition) with List II (behaviour of glycine).

List I:

  • A. pH 1

  • B. pH equal to pI

  • C. pH 12

  • D. In an electric field at pH 1

List II:

  • (i) Zwitterion, no net movement

  • (ii) Moves towards the cathode

  • (iii) Cation, H₃N⁺–CH₂–COOH

  • (iv) Anion, H₂N–CH₂–COO⁻

(a) A-ii, B-i, C-iv, D-iii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iv, B-i, C-iii, D-ii

33. Match List I (term) with List II (meaning).

List I:

  • A. Peptide bond

  • B. N-terminal residue

  • C. Essential amino acid

  • D. Zwitterion

List II:

  • (i) Residue with the free –NH₂ group, written on the left

  • (ii) Must be supplied in the diet

  • (iii) Dipolar ion carrying both + and − charges

  • (iv) –CO–NH– amide link between two amino acids

(a) A-iv, B-ii, C-i, D-iii (b) A-iv, B-i, C-ii, D-iii (c) A-i, B-iv, C-ii, D-iii (d) A-iii, B-i, C-ii, D-iv

34. Match List I (linear peptide, one chain) with List II (number of peptide bonds).

List I:

  • A. Tripeptide

  • B. Hexapeptide

  • C. Decapeptide

  • D. Chain of 51 residues

List II:

  • (i) 9

  • (ii) 50

  • (iii) 2

  • (iv) 5

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-ii, B-iv, C-i, D-iii (d) A-iii, B-iv, C-i, D-ii

35. How many of the following statements are correct?

  • A. Every α-amino acid found in proteins is chiral.

  • B. Amino acids have high melting points because they exist as zwitterions.

  • C. Amino acids are amphoteric.

  • D. Arginine and histidine appear in the NCERT list of essential amino acids.

  • E. Aspartic acid is a basic amino acid.

(a) Two (b) Four (c) Three (d) Five

36. Choose the correct set of statements about the peptide bond.

  • A. It forms by condensation with loss of water.

  • B. Its C–N bond has partial double-bond character.

  • C. The peptide unit is planar.

  • D. It breaks when a protein is denatured by heat.

(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D

37. Choose the correct set of statements.

  • A. Gly-Ala and Ala-Gly are the same dipeptide.

  • B. In Gly-Ala, glycine is the N-terminal residue.

  • C. In Gly-Ala, the alanine residue carries the free –COOH group.

  • D. A protein usually has more than about 100 amino acid residues.

(a) A and B only (b) B, C and D only (c) A, C and D only (d) C and D only

38. How many of the following are essential amino acids according to NCERT?

  • Valine

  • Glycine

  • Leucine

  • Alanine

  • Lysine

  • Serine

  • Tryptophan

(a) Three (b) Five (c) Two (d) Four

39. Three amino acids are placed in a buffer of pH 6.0 and an electric field is applied.

Amino acidpI
P3.2
Q6.0
R9.7

Which observation is expected? (a) P moves to the cathode and R to the anode (b) All three move to the anode (c) P moves to the anode, Q stays, R moves to the cathode (d) Q moves to the anode, P and R stay

40. The net charge on an amino acid X at three pH values is given: pH 2 → +1; pH 5.5 → 0; pH 10 → −1. X is most likely (a) Lysine (b) Alanine (c) Glutamic acid (d) Arginine

41. Using Gly = 75, Ala = 89 and Val = 117 g mol⁻¹, the molar mass of the tripeptide Gly-Ala-Val is (a) 245 g mol⁻¹ (b) 281 g mol⁻¹ (c) 263 g mol⁻¹ (d) 227 g mol⁻¹

Read the passage and answer Q42–43. A chemist completely hydrolyses 0.050 mol of a pure linear peptide in acid. She finds that 3.6 g of water was used up. The only products are glycine and alanine, in the mole ratio 3 : 2 (Gly = 75, Ala = 89, H₂O = 18 g mol⁻¹).

42. The number of amino acid residues in one peptide molecule is (a) 4 (b) 6 (c) 3 (d) 5

43. The molar mass of the peptide is (a) 403 g mol⁻¹ (b) 331 g mol⁻¹ (c) 349 g mol⁻¹ (d) 313 g mol⁻¹

44. How many different linear tripeptides can be made from glycine, alanine and valine if each amino acid may be used any number of times? (a) 6 (b) 9 (c) 27 (d) 3

45. A linear polyglycine chain, H–(NH–CH₂–CO)ₙ–OH, has a molar mass of 5718 g mol⁻¹. The number of peptide bonds in it is (a) 99 (b) 100 (c) 101 (d) 76

Level 4 answer key

QAnsReason
31aGly achiral; Lys basic; Glu acidic; Phe essential, aromatic
32cLow pH → cation, moves to cathode; pI → zwitterion; high pH → anion
33bDefinitions as matched
34dn − 1 bonds: 2, 5, 9, 50
35cB, C, D true; glycine is achiral; Asp is acidic
36aDenaturation leaves peptide bonds intact
37bOrder matters, so Gly-Ala and Ala-Gly differ
38dVal, Leu, Lys, Trp are essential
39cpH above pI → anion → anode; at pI no movement; below pI → cathode
40bSingle charge changes and pI near 5.5 fit a neutral amino acid
41a281 − 2 × 18 = 245
42d0.20 mol water / 0.050 mol = 4 bonds → 5 residues
43b3(75) + 2(89) − 4(18) = 403 − 72 = 331
44c3 × 3 × 3 = 27
45a57n + 18 = 5718 → n = 100 residues → 99 bonds
22 min left
‹
›
Chapter 3: Amino Acids | NEET Chemistry Book 19…