Chapter 5: Electric Potential and Equipotential Surfaces
What you will learn
What electric potential and potential difference mean, in terms of work.
The potential of a point charge, a system of charges and a dipole.
The potential of a charged ring and a thin spherical shell.
How field and potential are linked: E = −dV/dr.
What equipotential surfaces are, their shapes and their properties.
5.1 Potential difference and potential
Water in an overhead tank flows down to your kitchen tap because the tank is higher. The height difference decides how much energy each litre gains. Electric potential plays the role of height for charges.
The electrostatic force is conservative. So the work done in moving a charge between two points does not depend on the path. This lets us define a potential at every point.
Potential difference. The potential difference between B and A is the work done by an external agent in moving a unit positive test charge from A to B slowly, with no gain in kinetic energy.
Potential at a point. Take the reference point at infinity, where V = 0. The potential at P is the work done by an external agent in bringing a unit positive charge from infinity to P.
V is a scalar. It can be positive, negative or zero.
SI unit: volt (V). 1 V = 1 J/C.
Dimensional formula: [M L² T⁻³ A⁻¹].
A positive charge left free moves from high potential to low potential, like water running downhill. A negative charge moves the other way.
5.2 Potential of a point charge
Bring a unit positive charge from infinity to point P at distance r from +q. The field pushes outward, so the agent works against it. The work done by the agent is the negative of the work done by the field.
V varies as 1/r, while E varies as 1/r².
For +q, V is positive and falls to zero at infinity. For −q, V is negative.
V is the same at all points at the same distance from the charge.
5.3 Potential of a system of charges
Potentials add like ordinary numbers, with signs. No vector work is needed.
This makes V easier to find than E. A point can have zero V and non-zero E, or zero E and non-zero V.
Midpoint of +q and −q: V = 0, but E is not zero.
Midpoint of +q and +q: E = 0, but V = 2kq/(r/2) = 4kq/r.
Points of zero potential for two unlike charges. For +q₁ and −q₂ on a line, V = 0 at two points: one between them and one outside, on the side of the smaller charge. Both lie nearer the smaller charge.
5.4 Potential of an electric dipole
Take a short dipole of moment p, and a point P at distance r from its centre, with OP at angle θ to p. Let r₁ and r₂ be the distances of P from +q and −q.
For r much larger than a, r₁ ≈ r − a cos θ and r₂ ≈ r + a cos θ. Then
On the axis (θ = 0): V = kp/r². On the far side (θ = 180°): V = −kp/r².
On the equatorial line (θ = 90°): V = 0, even though E is kp/r³ there.
Dipole potential falls as 1/r², faster than a point charge's 1/r.
The exact axial potential is kp/(r² − a²).
Work along the equator. Since V = 0 at every point of the equatorial plane, no work is needed to move a charge along it.
5.5 Potential of continuous charges
Add small contributions: V = ∫ k dq/r. Because V is a scalar, there is no need to resolve components.
Ring on its axis. Every element of a ring of radius R is the same distance √(R² + x²) from an axial point at distance x.
At the centre, E = 0 but V = kQ/R. This is a favourite NEET contrast.
Thin spherical shell. Outside, the shell acts like a point charge at its centre. Inside, E = 0, so no work is needed to move a charge around. The potential is the same everywhere inside, equal to its surface value.

E jumps from zero to kQ/R² at the surface and then falls as 1/r²; V stays at kQ/R everywhere inside and falls smoothly as 1/r outside, with no jump.
| Region of a thin shell | Field E | Potential V |
|---|---|---|
| Inside (r less than R) | Zero | kQ/R, constant |
| On the surface (r = R) | kQ/R² = σ/ε₀ | kQ/R |
| Outside (r greater than R) | kQ/r² | kQ/r |
Concentric shells. For a point inside several shells, add kq/R for each shell enclosing it and kq/r for each shell inside it. For shells of radii a and b (a less than b) carrying q₁ and q₂:
The difference depends only on the inner charge.
Merging drops. n identical charged spherical drops, each with charge q and potential V, merge into one big drop. Volume is conserved, so the big radius is R = n^(1/3) r. Total charge is nq. So the new potential is V_big = k(nq)/(n^(1/3) r) = n^(2/3) V.
5.6 Relation between field and potential
From the definition, dV = −E · dr. In one direction:
The field points in the direction in which V falls fastest.
The size of E is the rate of fall of V with distance. This is called the potential gradient.
In three dimensions, each component is a rate of change along that axis.
Going the other way:
Uniform field. Between points a distance d apart along the field, V falls by Ed. So E = V/d. This is why field is often given in V/m. Only the part of the displacement along the field counts.
5.7 Equipotential surfaces
An equipotential surface is a surface on which every point has the same potential. Think of contour lines on a hill map: each line joins points of the same height.
Properties
No work is done in moving a charge along an equipotential surface, since ΔV = 0.
The field is always at right angles to the equipotential surface. If E had a part along the surface, moving a charge along it would need work.
Field lines point from higher to lower potential surfaces.
Two equipotential surfaces never intersect. Otherwise one point would have two potentials.
For equal steps of V, the surfaces are closer together where the field is stronger. This follows from E = ΔV/Δr.
The surface of a conductor in electrostatics is an equipotential surface (Chapter 7).

Around a point charge the spheres crowd together near the charge, where E is strong; in a uniform field the planes are equally spaced; for a dipole the equatorial plane is the V = 0 surface.
| Source | Shape of equipotential surfaces |
|---|---|
| Point charge | Concentric spheres centred on the charge; closer together near it |
| Uniform field | Parallel planes at right angles to the field, equally spaced |
| Infinite line charge | Coaxial cylinders around the line |
| Dipole | Curved surfaces; the equatorial plane is the V = 0 surface |
| Thin charged shell | Concentric spheres outside; the whole inside is one equipotential volume |
Worked examples
Worked example 5.1: How much work is needed to move a 2 μC charge between two points with a potential difference of 50 V?
Solution: W = qΔV = 2 × 10⁻⁶ × 50 = 1 × 10⁻⁴ J.
Worked example 5.2: Find the potential 30 cm from a 6 nC charge.
Solution: V = kq/r = (9 × 10⁹ × 6 × 10⁻⁹)/0.3 = 180 V.
Worked example 5.3: Charges of +2 nC, −3 nC, +5 nC and +4 nC sit at the corners of a square whose diagonal is 20 cm. Find the potential at the centre.
Solution: Each corner is 10 cm from the centre. Add the charges with sign: 2 − 3 + 5 + 4 = 8 nC. V = (9 × 10⁹ × 8 × 10⁻⁹)/0.1 = 720 V. No vector work was needed.
Worked example 5.4: A +3 nC charge is at x = 0 and a −1 nC charge at x = 16 cm. Find the points on the x-axis where V = 0.
Solution: Between them, at x (in cm): 3/x = 1/(16 − x), so 48 − 3x = x and x = 12 cm. Beyond −1 nC (x greater than 16): 3/x = 1/(x − 16), so 3x − 48 = x and x = 24 cm. Both points lie nearer the smaller charge, as expected. On the left of +3 nC, the larger charge always wins, so V cannot be zero there.
Worked example 5.5: A short dipole has p = 4 × 10⁻⁹ C m. Find the potential 20 cm from it (a) on the axis, (b) at 60° to the axis, (c) on the equatorial line.
Solution: (a) V = kp/r² = (9 × 10⁹ × 4 × 10⁻⁹)/0.04 = 900 V. (b) V = kp cos 60°/r² = 450 V. (c) cos 90° = 0, so V = 0.
Worked example 5.6: A thin shell of radius 10 cm carries 5 nC. Find V at 5 cm and at 20 cm from the centre.
Solution: At 5 cm (inside): V = kQ/R = (9 × 10⁹ × 5 × 10⁻⁹)/0.1 = 450 V. At 20 cm: V = kQ/r = 45/0.2 = 225 V.
Worked example 5.7: The potential in a region is V = 3x² + 2y volt (x, y in metres). Find the field at (1 m, 2 m).
Solution: Eₓ = −∂V/∂x = −6x = −6 V/m. Eᵧ = −∂V/∂y = −2 V/m. E = (−6î − 2ĵ) V/m, with size √(36 + 4) = √40 ≈ 6.32 V/m.
Worked example 5.8: A uniform field of 200 N/C points along +x. Find V_B − V_A for A at (0, 0) and B at (3 m, 4 m).
Solution: Only the x-part of the displacement counts. V_B − V_A = −E × Δx = −200 × 3 = −600 V. B is at the lower potential, as the field points that way.
Worked example 5.9: Two concentric thin shells of radii 10 cm and 20 cm carry 2 nC and 4 nC. Find the potential of each shell and their potential difference.
Solution: Inner shell: V = k(2 × 10⁻⁹/0.1 + 4 × 10⁻⁹/0.2) = 9 × 10⁹ × 4 × 10⁻⁸ = 360 V. Outer shell: V = k(6 × 10⁻⁹)/0.2 = 270 V. Difference = 90 V. Check: kq₁(1/a − 1/b) = 9 × 10⁹ × 2 × 10⁻⁹ × (10 − 5) = 90 V.
Quick revision
V = W/q₀, unit volt = J/C. Scalar.
Point charge: V = kq/r. System: V = Σkqᵢ/rᵢ with signs.
Short dipole: V = kp cos θ/r²; zero on the equator.
Ring: V = kQ/√(R² + x²); centre kQ/R.
Shell: kQ/r outside, kQ/R everywhere inside.
E = −dV/dr; E points towards falling V; uniform field V = Ed.
Equipotentials are at right angles to E, never cross, and crowd where E is strong.
n merged drops: V becomes n^(2/3) times.
NEET traps
Thinking zero E means zero V, or the reverse. At a ring's centre E = 0 but V = kQ/R.
Adding potentials as vectors. Potential is a scalar: add with signs only.
Using the full distance in V = Ed when the move is at an angle. Use only the part along the field.
Saying the potential inside a shell is zero. It equals the surface potential.
Forgetting the minus sign in E = −dV/dx when finding the direction of E.
Using V = kq/r for a dipole. Dipole potential goes as 1/r².
Practice MCQs: Chapter 5
Level 1: Concept check
1. One volt is the same as (a) 1 J/C (b) 1 C/J (c) 1 N/C (d) 1 J C
2. Electric potential is (a) a vector (b) a tensor (c) a scalar (d) always positive
3. The potential of a point charge varies with distance r as (a) 1/r² (b) 1/r (c) r (d) 1/r³
4. The equipotential surfaces of an isolated point charge are (a) planes (b) cylinders (c) cones (d) concentric spheres
5. The work done in moving a charge along an equipotential surface is (a) zero (b) positive (c) negative (d) infinite
6. Field lines and equipotential surfaces meet at (a) 0° (b) 90° (c) 45° (d) any angle
7. Inside a uniformly charged thin spherical shell, the potential is (a) zero (b) kQ/r (c) constant and equal to the surface value (d) greatest at the centre and falling outward
8. At points on the equatorial line of a dipole, the potential is (a) kp/r² (b) kp/r³ (c) −kp/r² (d) zero
9. The electric field points in the direction in which the potential (a) falls fastest (b) rises fastest (c) stays constant (d) is zero
10. The dimensional formula of electric potential is (a) [M L² T⁻² A⁻¹] (b) [M L T⁻³ A⁻¹] (c) [M L² T⁻³ A⁻¹] (d) [M L² T⁻³ A]
Level 2: NEET standard
11. The potential 20 cm from a 4 nC charge is (a) 90 V (b) 180 V (c) 360 V (d) 900 V
12. The work needed to move 3 μC from A (20 V) to B (80 V) is (a) 6 × 10⁻⁵ J (b) 3 × 10⁻⁵ J (c) 2.4 × 10⁻⁴ J (d) 1.8 × 10⁻⁴ J
13. Charges +q, −q, +q, −q sit in order at the corners of a square. At the centre, the potential is (a) zero (b) 4kq/a (c) 2√2 kq/a (d) −4kq/a
14. A +2 μC charge is at x = 0 and a −4 μC charge at x = 6 cm. Between them, V = 0 at (a) x = 3 cm (b) x = 4 cm (c) x = 2 cm (d) x = 1 cm
15. A short dipole has p = 2 × 10⁻⁹ C m. The potential on its axis 30 cm away is (a) 100 V (b) 200 V (c) 600 V (d) 400 V
16. A thin shell of radius 20 cm has a surface potential of 900 V. The potential 60 cm from its centre is (a) 900 V (b) 100 V (c) 450 V (d) 300 V
17. The potential along the x-axis is V = 4x² volt. The field at x = 2 m is (a) 16 V/m along −x (b) 16 V/m along +x (c) 8 V/m along −x (d) 32 V/m along −x
18. In a uniform field of 500 V/m, two points 4 cm apart along the field differ in potential by (a) 2 V (b) 200 V (c) 20 V (d) 12.5 V
19. The equipotential surfaces of a uniform field are (a) concentric spheres (b) planes at right angles to the field (c) planes parallel to the field (d) cylinders
20. Parallel equipotential planes 2 cm apart differ in potential by 5 V each. The field is (a) 2.5 V/m (b) 10 V/m (c) 100 V/m (d) 250 V/m
21. At the centre of a ring of radius R with charge Q, (a) E = 0 and V = kQ/R (b) E = kQ/R² and V = 0 (c) both are zero (d) E = kQ/R² and V = kQ/R
22. A thin shell of radius R carries Q, and a point charge q sits at its centre. The potential on the shell's surface is (a) kQ/R (b) kq/R (c) k(Q + q)/R (d) k(Q − q)/R
Level 3: Challenge
23. Concentric thin shells of radii 10 cm and 20 cm carry 2 nC and 4 nC. The potential difference between them is (a) 360 V (b) 90 V (c) 270 V (d) 180 V
24. Twenty-seven identical drops, each at potential V, merge into one drop. Its potential is (a) 9V (b) 27V (c) 3V (d) V/3
25. The potential in a region is V = 2xy + 3z volt. The size of the field at (1, 1, 1) is about (a) 3 V/m (b) 7 V/m (c) 5 V/m (d) 4.12 V/m
26. The field in a region is E = 2x î V/m (x in metres). The potential difference V(1 m) − V(3 m) is (a) 4 V (b) −8 V (c) 8 V (d) 2 V
27. At distance r from a short dipole p, at 60° to its axis, the potential is (a) kp/r² (b) kp/(2r²) (c) √3 kp/(2r²) (d) kp/(2r³)
28. Six equal charges q sit at the corners of a regular hexagon of side a. At the centre, (a) E = 0 and V = 0 (b) E = 6kq/a² and V = 0 (c) E = 0 and V = 6kq/a (d) E = 6kq/a² and V = 6kq/a
29. Assertion (A): The electric field is zero wherever the electric potential is zero. Reason (R): The field equals the negative rate of change of potential with distance. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Two equipotential surfaces can never intersect. Statement II: Equipotential surfaces are closer together where the field is weaker. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | V = W/q |
| 2 | c | Work per charge has no direction |
| 3 | b | V = kq/r |
| 4 | d | Same r gives same V |
| 5 | a | W = qΔV and ΔV = 0 |
| 6 | b | E has no part along an equipotential |
| 7 | c | E = 0 inside, so V stays at kQ/R |
| 8 | d | cos 90° = 0 |
| 9 | a | E = −dV/dr |
| 10 | c | Work/charge: M L² T⁻²/(A T) |
| 11 | b | 9 × 10⁹ × 4 × 10⁻⁹/0.2 = 180 V |
| 12 | d | W = q(V_B − V_A) = 3 × 10⁻⁶ × 60 |
| 13 | a | Charges add to zero at equal distances |
| 14 | c | 2/x = 4/(6 − x) gives x = 2 cm |
| 15 | b | kp/r² = 18/0.09 = 200 V |
| 16 | d | V ∝ 1/r outside: 900 × 20/60 |
| 17 | a | E = −dV/dx = −8x = −16 V/m |
| 18 | c | V = Ed = 500 × 0.04 |
| 19 | b | V changes only along the field |
| 20 | d | E = 5/0.02 = 250 V/m |
| 21 | a | Ring symmetry cancels E; V adds to kQ/R |
| 22 | c | Both charges are at distance R or act from the centre |
| 23 | b | kq₁(1/a − 1/b) = 9 × 10⁹ × 2 × 10⁻⁹ × 5 = 90 V |
| 24 | a | V grows as n^(2/3) = 27^(2/3) = 9 |
| 25 | d | E = −(2y, 2x, 3) = −(2, 2, 3); size √17 |
| 26 | c | V₁ − V₃ = ∫ from 1 to 3 of 2x dx = 8 V |
| 27 | b | kp cos 60°/r² |
| 28 | c | Fields cancel in pairs; potentials add |
| 29 | d | Midpoint of a dipole has V = 0 but E not zero; R is true |
| 30 | c | Crossing would need two potentials at one point; spacing is smaller where E is stronger |
Chapter 5 revision sheet
One-page summary
Potential difference: V_B − V_A = work done by an external agent per unit positive charge, moving it slowly from A to B.
Potential at a point = work per unit charge to bring a test charge from infinity. Unit volt = J C⁻¹. Scalar.
Point charge: V = kq/r (sign of q included). Falls as 1/r.
Many charges: V = k Σ qᵢ/rᵢ, a plain algebraic sum.
Short dipole: V = kp cos θ/r²; zero everywhere on the equatorial plane.
Ring on its axis: V = kQ/√(R² + x²); at the centre V = kQ/R even though E = 0 there.
Thin shell: V = kQ/r outside, kQ/R on and everywhere inside. V is continuous; E jumps.
n identical drops merging: R = n^(1/3)r, Q = nq, V = n^(2/3)V₀, σ = n^(1/3)σ₀.
E = −dV/dr. E points the way V falls fastest. In components, Eₓ = −∂V/∂x.
Uniform field: V = Ed between two points d apart along E.
E = 0 does not mean V = 0, and V = 0 does not mean E = 0.
Equipotential surfaces are always perpendicular to E. No work is done moving a charge along one.
Equipotentials never cross; closer spacing (equal steps of V) means stronger field.
Shapes: spheres for a point charge, planes for a uniform field, coaxial cylinders for a line charge.
Zero-potential points for +q₁ and −q₂ (q₁ bigger): one between them, one outside beyond the smaller charge.
Must-remember table
| Source | Potential V | Field E |
|---|---|---|
| Point charge | kq/r | kq/r² |
| Short dipole, axis | kp/r² | 2kp/r³ |
| Short dipole, equator | 0 | kp/r³ |
| Ring, centre | kQ/R | 0 |
| Thin shell, inside | kQ/R | 0 |
| Thin shell, outside | kQ/r | kQ/r² |
| Uniform field, distance d | Ed (difference) | V/d |
| n drops merged | n^(2/3) V₀ | n^(1/3) E₀ at surface |
Memory aids
"Field runs downhill": E always points from high potential to low potential.
"Scalar sum, no arrows": add potentials as plain numbers with signs; add fields as vectors.
"Two-thirds for Voltage": merged drops have V = n^(2/3)V₀ (and one-third for radius and σ).
"PERP" (Potential surfaces Everywhere at Right angles to Paths of field): equipotentials are perpendicular to field lines.
Concept connections
Potential energy of charges, the next chapter, is simply U = qV.
Potential difference drives current in Physics Book 12: Current Electricity.
The electron volt and stopping potential reappear in Physics Book 17: Dual Nature of Matter and Radiation; electrode potentials in Chemistry Book 7: Redox Reactions and Electrochemistry use the same volt.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match the source (List I) with the potential (List II).
List I:
A. Point charge q, at distance r
B. Short dipole, on its axis at distance r
C. Short dipole, on its equatorial line
D. Inside a thin shell of charge Q and radius R
List II:
(i) kQ/R
(ii) zero
(iii) kq/r
(iv) kp/r²
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
32. Match List I with List II.
List I:
A. Field from potential
B. Potential difference in a uniform field over distance d
C. Work done by an agent moving q from A to B
D. SI unit of potential
List II:
(i) q(V_B − V_A)
(ii) J C⁻¹
(iii) −dV/dr
(iv) Ed
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-ii, D-i
33. Match the charge arrangement (List I) with the shape of its equipotential surfaces (List II).
List I:
A. Point charge
B. Uniform field
C. Infinite line charge
D. Charged conductor in electrostatic equilibrium
List II:
(i) The conductor's own surface is one
(ii) Coaxial cylinders
(iii) Concentric spheres
(iv) Parallel planes perpendicular to E
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-ii, B-iv, C-iii, D-i
34. Eight identical charged mercury drops, each of radius r, charge q, potential V and surface density σ, merge into one drop. Match List I with List II.
List I:
A. Radius of the big drop
B. Charge on the big drop
C. Potential of the big drop
D. Surface charge density of the big drop
List II:
(i) 4V
(ii) 2σ
(iii) 8q
(iv) 2r
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-i, C-iii, D-ii
35. How many of the following statements are correct?
A. Where E = 0, V must also be zero.
B. Where V = 0, E must also be zero.
C. E points in the direction in which V decreases.
D. Electric potential is a scalar.
(a) 2 (b) 3 (c) 1 (d) 4
36. Choose the correct set of statements.
A. Two equipotential surfaces never intersect.
B. No work is done moving a charge along an equipotential surface.
C. E is parallel to an equipotential surface.
D. Equipotentials drawn at equal steps of V crowd together where E is stronger.
(a) A and B only (b) B and C only (c) A, C and D only (d) A, B and D only
37. Choose the correct set of statements.
A. Inside a charged hollow conducting sphere, V equals its surface value.
B. Outside a charged thin shell, V = kQ/r.
C. The V–r graph of a thin shell jumps at its surface.
D. The potential at the centre of a uniformly charged ring is zero.
(a) A, B and C only (b) A and B only (c) B and D only (d) A, B and D only
38. How many of the following statements are correct?
A. For a dipole, V = 0 at every point of the equatorial plane.
B. For +2q at x = 0 and −q at x = 3 m, V = 0 at x = 2 m.
C. For the same pair, V = 0 also at x = 6 m.
D. 1 eV = 1.6 × 10⁻¹⁹ V.
(a) 4 (b) 2 (c) 3 (d) 1
39. A graph of V against x has three straight parts: V rises from 0 to 20 V between x = 0 and x = 2 m, stays at 20 V from x = 2 m to x = 4 m, and falls to 0 V at x = 5 m. Which statement is correct?
(a) The field is strongest between 4 m and 5 m, at 20 V m⁻¹ along +x (b) The field is strongest between 0 and 2 m, at 10 V m⁻¹ along +x (c) The field between 2 m and 4 m is 20 V m⁻¹ (d) The field between 4 m and 5 m points along −x
40. The potential along the x-axis is measured.
| x (m) | 0 | 1 | 2 | 3 |
|---|---|---|---|---|
| V (volt) | 0 | 4 | 16 | 36 |
The data fit V = 4x². The field at x = 2 m is:
(a) 16 V m⁻¹ along +x (b) 8 V m⁻¹ along −x (c) 32 V m⁻¹ along −x (d) 16 V m⁻¹ along −x
41. A V–r graph for a thin charged shell of radius 10 cm is flat at 900 V from r = 0 to r = 10 cm and then falls as 1/r. The charge on the shell is:
(a) 1 nC (b) 10 nC (c) 100 nC (d) 90 nC
Case for Q42–43: Three charges sit at the corners of an equilateral triangle of side 30 cm: +2 μC at A, +2 μC at B and −1 μC at C. Point M is the midpoint of side AB.
42. The potential at M is about:
(a) 2.05 × 10⁵ V (b) 2.4 × 10⁵ V (c) 1.2 × 10⁵ V (d) 2.75 × 10⁵ V
43. The work needed to bring a +1 μC charge slowly from infinity to M is about:
(a) 0.12 J (b) 0.24 J (c) 0.21 J (d) 2.1 J
44. The potential in a region is V = 2x² + 3y (volt, with x and y in metre). The magnitude of the field at (1 m, 2 m) is:
(a) 7 V m⁻¹ (b) 5 V m⁻¹ (c) 4 V m⁻¹ (d) 3 V m⁻¹
45. A proton is released from rest 5 cm from a fixed +1 μC charge. Its speed when it is 10 cm away is about (mₚ = 1.67 × 10⁻²⁷ kg):
(a) 1.8 × 10⁸ m s⁻¹ (b) 2.9 × 10⁶ m s⁻¹ (c) 8.3 × 10⁶ m s⁻¹ (d) 4.2 × 10⁶ m s⁻¹
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | kq/r; kp/r² on the axis; zero on the equator; kQ/R inside a shell |
| 32 | b | E = −dV/dr, V = Ed, W = qΔV, volt = J C⁻¹ |
| 33 | a | Spheres, planes, cylinders, and the conductor surface itself |
| 34 | c | R = 8^(1/3)r = 2r, Q = 8q, V ∝ Q/R gives 4V, σ ∝ Q/R² gives 2σ |
| 35 | a | C and D true; inside a shell E = 0 but V is not, and V = 0 on a dipole's equator where E is not |
| 36 | d | E is perpendicular to equipotentials |
| 37 | b | V is continuous for a shell; ring centre has V = kQ/R |
| 38 | c | A, B, C true (2/2 − 1/1 = 0 and 2/6 − 1/3 = 0); 1 eV = 1.6 × 10⁻¹⁹ J |
| 39 | a | Slopes: +10, 0, −20 V m⁻¹; E = −slope, so 20 V m⁻¹ along +x in the last part, 10 V m⁻¹ along −x in the first |
| 40 | d | E = −dV/dx = −8x = −16 V m⁻¹ |
| 41 | b | Q = VR/k = 900 × 0.1/(9 × 10⁹) = 10⁻⁸ C |
| 42 | a | AM = BM = 0.15 m, CM = 0.26 m: V = 9 × 10⁹(2.67 × 10⁻⁵ − 3.85 × 10⁻⁶) = 2.05 × 10⁵ V |
| 43 | c | W = qV = 10⁻⁶ × 2.05 × 10⁵ = 0.21 J |
| 44 | b | Eₓ = −4x = −4, Eᵧ = −3; magnitude 5 V m⁻¹ |
| 45 | d | ΔV = kq(1/0.05 − 1/0.1) = 9 × 10⁴ V; K = 1.44 × 10⁻¹⁴ J; v = √(2K/m) = 4.2 × 10⁶ m s⁻¹ |