Chapter 3: Einstein's Photoelectric Equation and Photons
What you will learn
Planck's quantum idea and Einstein's photon picture of light.
How to derive Einstein's photoelectric equation and use it in frequency and wavelength forms.
How to read the Kₘₐₓ–ν and V₀–ν graphs: slopes, intercepts, two metals.
The energy, momentum and other properties of a photon.
How to count photons per second from a source, and the force a light beam exerts.
3.1 Planck's quantum idea
In 1900, Max Planck was trying to explain the colours given out by hot bodies (black body radiation). He found he could do it only by assuming that the oscillators in the body exchange energy in fixed packets. Each packet of energy at frequency ν is hν:
h is Planck's constant. Planck himself saw this as a trick about emission and absorption, not a statement about light itself.
3.2 Einstein's photon picture (1905)
Einstein went further. He said light itself travels as a stream of packets. Each packet is called a photon (the name came later). In a beam of frequency ν:
every photon has the same energy hν,
a brighter beam has more photons per second, not bigger photons,
a photon is absorbed whole or not at all. It cannot hand over half its energy.
Think of a chai stall that only sells full cups. You cannot buy half a cup. A richer customer buys more cups, not a bigger cup.
3.3 Deriving Einstein's photoelectric equation
A photon of energy hν strikes an electron in the metal and is absorbed. The electron now has energy hν to spend.
Part of it, at least φ₀, is spent in getting out of the metal.
The rest is kinetic energy.
For an electron at the top level that loses nothing on the way out, the leftover is the largest possible. Energy conservation gives:
This is Einstein's photoelectric equation.
Threshold frequency. Emission just starts when Kₘₐₓ = 0. So hν₀ = φ₀:
Stopping potential form. Put Kₘₐₓ = eV₀:
Wavelength form. Use ν = c/λ. The threshold wavelength λ₀ is the longest wavelength that can still cause emission:
Handy shortcut. hc = 1240 eV nm. So photon energy in eV = 1240 / (wavelength in nm), and λ₀ in nm = 1240 / (φ₀ in eV).
Remember the directions: emission needs ν above ν₀, which means λ below λ₀.
3.4 How the equation explains the four laws
Intensity and current. Intensity sets the number of photons per second. Each photon frees at most one electron. So current is proportional to intensity.
Kₘₐₓ independent of intensity. Kₘₐₓ = hν − φ₀ has no intensity in it.
Threshold. If hν is less than φ₀, a single photon cannot free an electron. Photons cannot team up (two-photon events are negligible at normal intensities), so there is no emission at any intensity.
No time lag. One photon gives its whole energy to one electron in one go. No waiting to build up energy.
Chapter 4 compares this with the wave picture point by point.
3.5 Graphs from Einstein's equation
Kₘₐₓ against ν. Kₘₐₓ = hν − φ₀ is a straight line of the form y = mx + c.
Slope = h, the same for every metal.
Cuts the ν axis at ν₀.
Extended backwards, it cuts the K axis at −φ₀.
Two metals give two parallel lines. The metal with the larger work function lies to the right.

Both lines have slope h; each meets the ν axis at its own threshold and, extended, the K axis at minus its work function.
V₀ against ν. Divide by e: slope = h/e, ν-intercept = ν₀, V₀-intercept = −φ₀/e. In 1916 Robert Millikan measured this slope very carefully and got a value of h that matched Planck's. That confirmed Einstein's equation.
Other plots NEET likes.
| Graph (y against x) | Shape | Slope or key feature |
|---|---|---|
| Kₘₐₓ against ν | Straight line | Slope h; ν-intercept ν₀ |
| V₀ against ν | Straight line | Slope h/e; ν-intercept ν₀ |
| Kₘₐₓ against 1/λ | Straight line | Slope hc; (1/λ)-intercept 1/λ₀ |
| Kₘₐₓ against λ | Falling curve, reaches zero at λ₀ | Not a straight line |
| Saturation current against intensity | Straight line through origin | Frequency fixed, above ν₀ |
| Kₘₐₓ against intensity | Horizontal line | Intensity has no effect |
3.6 Properties of a photon
| Property | Photon |
|---|---|
| Energy | hν = hc/λ |
| Momentum | h/λ = E/c |
| Speed in vacuum | c, always |
| Rest mass | Zero (a photon is never at rest) |
| Charge | Zero, so not deflected by electric or magnetic fields |
| Number | Not conserved: photons are created (emission) and destroyed (absorption) |
| In collisions | Total energy and momentum are conserved |
| Effective (dynamic) mass | E/c² = h/(cλ), used only for rough reasoning |
The photon is a strange particle: no rest mass, but it still carries momentum. This is why light pushes on things.
3.7 Photon flux and intensity
A source of power P gives out N photons per second, each of energy hν:
For the same power, a red source sends out more photons per second than a violet one, because each red photon carries less energy.
Intensity I is power per unit area. For a point source spreading equally in all directions, at distance r:
Not every photon frees an electron. The number of photoelectrons per second is at most the number of photons absorbed per second. The ratio is called the quantum efficiency; it is usually small.
3.8 Force exerted by light
Each photon carries momentum h/λ. A beam of power P delivers momentum P/c every second.
If the surface absorbs the beam completely (normal incidence), the force is F = P/c.
If it reflects completely, the momentum reverses, so F = 2P/c.
If a fraction r is reflected and the rest absorbed, F = (1 + r)P/c.
Pressure = force per area: I/c for a perfect absorber and 2I/c for a perfect reflector. These forces are tiny. A 30 W beam on a mirror pushes with only 2 × 10⁻⁷ N.
Worked examples
Worked example 3.1: Find the energy of a photon of wavelength 620 nm in eV and joules.
Solution: E = 1240/620 = 2.0 eV = 2.0 × 1.6 × 10⁻¹⁹ = 3.2 × 10⁻¹⁹ J.
Worked example 3.2: Find the momentum of a photon of wavelength 500 nm.
Solution: p = h/λ = 6.63 × 10⁻³⁴ / 5.0 × 10⁻⁷ = 1.33 × 10⁻²⁷ kg m/s.
Worked example 3.3: A 10 mW laser emits light of wavelength 663 nm. How many photons does it emit per second?
Solution: Energy per photon = hc/λ = (6.63 × 10⁻³⁴ × 3 × 10⁸) / (663 × 10⁻⁹) = 3.0 × 10⁻¹⁹ J. N = P/E = 10 × 10⁻³ / 3.0 × 10⁻¹⁹ ≈ 3.3 × 10¹⁶ per second.
Worked example 3.4: Light of wavelength 300 nm falls on potassium (φ₀ = 2.30 eV). Find Kₘₐₓ and the stopping potential.
Solution: Photon energy = 1240/300 = 4.13 eV. Kₘₐₓ = 4.13 − 2.30 = 1.83 eV. Stopping potential V₀ = 1.83 V.
Worked example 3.5: Find the threshold wavelength of sodium (φ₀ = 2.75 eV). Will yellow light of 589 nm from a street lamp cause emission?
Solution: λ₀ = 1240/2.75 ≈ 451 nm. The lamp's 589 nm is longer than λ₀, so each photon has too little energy (about 2.1 eV). No emission, however bright the lamp.
Worked example 3.6: For a metal, the stopping potential is 1.5 V with 310 nm light and 2.5 V with 248 nm light. Find hc (in eV nm) and the work function.
Solution: Write the equation twice:
Subtract: hc(1/248 − 1/310) = 1.0 eV. Now 1/248 − 1/310 = 62/76880 = 8.06 × 10⁻⁴ per nm. So hc ≈ 1240 eV nm. Then φ₀ = 1240/310 − 1.5 = 4.0 − 1.5 = 2.5 eV.
Worked example 3.7 (NEET-hard): With light of wavelength λ, the stopping potential is V. With wavelength 2λ, it is V/4. Find the threshold wavelength.
Solution:
Subtract: hc/(2λ) = 3eV/4, so hc/λ = 3eV/2. Then φ₀ = 3eV/2 − eV = eV/2 = hc/(3λ). So λ₀ = hc/φ₀ = 3λ.
Worked example 3.8: A 30 W laser beam falls normally on a perfect mirror. Find the force on the mirror. What would it be on a perfect black surface?
Solution: Mirror: F = 2P/c = 2 × 30 / 3 × 10⁸ = 2.0 × 10⁻⁷ N. Black surface: F = P/c = 1.0 × 10⁻⁷ N.
Worked example 3.9 (NEET-hard): A 100 W bulb turns 5% of its power into visible light of average wavelength 600 nm, spread evenly in all directions. How many visible photons cross 1 m² each second at 2 m from the bulb?
Solution: Visible power = 5 W. Photon energy = hc/λ = 6.63 × 10⁻³⁴ × 3 × 10⁸ / 6 × 10⁻⁷ = 3.32 × 10⁻¹⁹ J. N = 5 / 3.32 × 10⁻¹⁹ = 1.51 × 10¹⁹ per second. Sphere area at 2 m = 4π(2)² = 50.3 m². Flux = 1.51 × 10¹⁹ / 50.3 ≈ 3.0 × 10¹⁷ photons per m² per second.
Quick revision
Photon energy E = hν = hc/λ; in eV, E = 1240/λ(nm).
Photon momentum p = h/λ = E/c; rest mass zero; charge zero; speed c.
Einstein: Kₘₐₓ = hν − φ₀ = eV₀; φ₀ = hν₀ = hc/λ₀.
Kₘₐₓ–ν: slope h; V₀–ν: slope h/e; both same for all metals.
Photons per second N = Pλ/hc. Point source flux falls as 1/r².
Force of light: P/c (absorbed), 2P/c (reflected).
Brighter light: more photons, same energy per photon.
NEET traps
Doubling the frequency does not double Kₘₐₓ. Kₘₐₓ = 2hν − φ₀, which is more than double.
Mixing up the directions: emission needs ν greater than ν₀ but λ less than λ₀.
Using 1240 with λ in metres or Å. It works with λ in nm and E in eV (or 12400 with Å).
Thinking a photon has rest mass hν/c². Its rest mass is zero; hν/c² is only an effective mass.
Forgetting the factor 2 for a reflecting surface when finding force or pressure.
Taking slope of V₀–ν as h. It is h/e; slope of Kₘₐₓ–ν is h.
Practice MCQs: Chapter 3
Level 1: Concept check
1. The energy of a photon of frequency ν is (a) hν (b) h/ν (c) hν² (d) ν/h
2. Einstein's photoelectric equation is (a) Kₘₐₓ = hν + φ₀ (b) Kₘₐₓ = φ₀ − hν (c) Kₘₐₓ = hν − φ₀ (d) Kₘₐₓ = hν/φ₀
3. The rest mass of a photon is (a) 9.1 × 10⁻³¹ kg (b) hν/c² (c) h/(λc) (d) zero
4. The momentum of a photon of wavelength λ is (a) hλ (b) h/λ (c) λ/h (d) hc/λ
5. The slope of the Kₘₐₓ versus ν graph is (a) h/e (b) e/h (c) h (d) φ₀
6. Photons are not deflected by electric and magnetic fields because they (a) carry no charge (b) have no momentum (c) move too fast to be deflected (d) have no energy
7. The threshold wavelength λ₀ of a metal of work function φ₀ is (a) φ₀/hc (b) hc/φ₀ (c) hφ₀/c (d) φ₀c/h
8. The Kₘₐₓ–ν line, extended backwards, cuts the Kₘₐₓ axis at (a) +φ₀ (b) h (c) ν₀ (d) −φ₀
9. The intensity of monochromatic light is increased. The energy of each photon (a) increases (b) decreases (c) stays the same (d) becomes zero
10. In the photon picture, when a photon meets a free electron in a metal, it (a) gives all its energy to one electron, or none (b) shares its energy among many electrons (c) passes its energy slowly over many seconds (d) is always reflected
Level 2: NEET standard
11. The energy of a photon of wavelength 620 nm is (a) 1.0 eV (b) 2.0 eV (c) 3.1 eV (d) 4.0 eV
12. The momentum of a photon of wavelength 500 nm is about (a) 3.3 × 10⁻³⁶ kg m/s (b) 4.0 × 10⁻¹⁹ kg m/s (c) 1.33 × 10⁻³¹ kg m/s (d) 1.33 × 10⁻²⁷ kg m/s
13. Light of wavelength 300 nm falls on a metal of work function 2.3 eV. The maximum kinetic energy of photoelectrons is about (a) 1.83 eV (b) 4.13 eV (c) 6.43 eV (d) 2.3 eV
14. The threshold wavelength for a metal of work function 2.48 eV is (a) 250 nm (b) 400 nm (c) 500 nm (d) 620 nm
15. A 5 mW laser emits light of wavelength 663 nm. The number of photons emitted per second is about (a) 3.3 × 10¹⁶ (b) 1.67 × 10¹⁶ (c) 1.67 × 10¹⁵ (d) 6.0 × 10¹⁵
16. The threshold frequency of a metal is 5 × 10¹⁴ Hz. Light of 8 × 10¹⁴ Hz falls on it. Taking h = 6.6 × 10⁻³⁴ J s, the stopping potential is about (a) 0.62 V (b) 2.06 V (c) 1.24 V (d) 3.3 V
17. Photons of energy 5.5 eV fall on a metal of work function 2.1 eV. The stopping potential is (a) 7.6 V (b) 2.1 V (c) 5.5 V (d) 3.4 V
18. A photon has momentum 3.3 × 10⁻²⁷ kg m/s. Its energy is about (a) 6.2 eV (b) 3.1 eV (c) 9.9 eV (d) 1.1 × 10⁻³⁵ J
19. Kₘₐₓ is plotted against ν for metal A (φ₀ = 2 eV) and metal B (φ₀ = 3 eV). The two lines (a) have different slopes (b) have the same slope, with A's line to the right (c) have the same slope, with B's line to the right (d) cross each other
20. A 6 W laser beam is completely absorbed by a surface at normal incidence. The force on the surface is (a) 4 × 10⁻⁸ N (b) 2 × 10⁻⁸ N (c) 1.8 × 10⁹ N (d) 2 × 10⁻⁶ N
21. The wavelength of a photon of energy 1 keV is about (a) 12.4 nm (b) 0.124 nm (c) 124 nm (d) 1.24 nm
22. Light of wavelength 400 nm falls on a metal whose threshold wavelength is 620 nm. Kₘₐₓ of the photoelectrons is about (a) 1.1 eV (b) 2.0 eV (c) 3.1 eV (d) 5.1 eV
Level 3: Challenge
23. For a metal, light of 400 nm gives a stopping potential of 0.60 V and light of 310 nm gives 1.50 V. The work function is (a) 3.1 eV (b) 1.9 eV (c) 2.5 eV (d) 0.9 eV
24. With light of wavelength λ the stopping potential is 3V. With wavelength 2λ it is V. The threshold wavelength is (a) 2λ (b) 3λ (c) 6λ (d) 4λ
25. A point source gives out 2 W of light of wavelength 660 nm evenly in all directions. The number of photons crossing 1 m² per second at 3 m is about (a) 5.9 × 10¹⁶ (b) 6.6 × 10¹⁸ (c) 1.8 × 10¹⁷ (d) 7.3 × 10¹⁷
26. The frequency of light on a metal (above threshold) is doubled. The maximum kinetic energy of photoelectrons becomes (a) more than double (b) exactly double (c) less than double (d) unchanged
27. Photons of 6 eV and then 3 eV fall on a metal of work function 2 eV. The ratio of maximum speeds of photoelectrons (first : second) is (a) √2 (b) 2 (c) 4 (d) 1/2
28. A 20 W beam falls normally on a surface that reflects 40% of it and absorbs the rest. The force on the surface is about (a) 6.7 × 10⁻⁸ N (b) 1.33 × 10⁻⁷ N (c) 4.0 × 10⁻⁸ N (d) 9.3 × 10⁻⁸ N
29. Assertion (A): The Kₘₐₓ versus ν lines for all metals have the same slope. Reason (R): Different metals have different work functions. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: A photon carries momentum h/λ even though its rest mass is zero. Statement II: Doubling the intensity of monochromatic light doubles the energy of each photon. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | Planck: E = hν |
| 2 | c | Photon energy = work function + Kₘₐₓ |
| 3 | d | A photon is never at rest; rest mass zero |
| 4 | b | p = h/λ |
| 5 | c | Kₘₐₓ = hν − φ₀, slope h |
| 6 | a | Photons are neutral |
| 7 | b | hν₀ = φ₀, λ₀ = c/ν₀ = hc/φ₀ |
| 8 | d | At ν = 0, K = −φ₀ |
| 9 | c | Energy per photon depends on ν only |
| 10 | a | Photon absorbed whole by one electron |
| 11 | b | 1240/620 = 2.0 eV |
| 12 | d | 6.63 × 10⁻³⁴ / 5 × 10⁻⁷ = 1.33 × 10⁻²⁷ |
| 13 | a | 1240/300 − 2.3 = 4.13 − 2.3 = 1.83 eV |
| 14 | c | 1240/2.48 = 500 nm |
| 15 | b | Photon energy 3.0 × 10⁻¹⁹ J; 5 × 10⁻³ / 3 × 10⁻¹⁹ ≈ 1.67 × 10¹⁶ |
| 16 | c | V₀ = h(ν − ν₀)/e = 6.6 × 10⁻³⁴ × 3 × 10¹⁴ / 1.6 × 10⁻¹⁹ ≈ 1.24 V |
| 17 | d | 5.5 − 2.1 = 3.4 eV, so 3.4 V |
| 18 | a | E = pc = 9.9 × 10⁻¹⁹ J ≈ 6.2 eV |
| 19 | c | Same slope h; larger φ₀ means larger ν₀ |
| 20 | b | F = P/c = 6 / 3 × 10⁸ = 2 × 10⁻⁸ N |
| 21 | d | 1240/1000 = 1.24 nm |
| 22 | a | 1240(1/400 − 1/620) = 3.1 − 2.0 = 1.1 eV |
| 23 | c | hc/400 = 3.1 eV, so φ₀ = 3.1 − 0.6 = 2.5 eV (check: 4.0 − 1.5 = 2.5) |
| 24 | d | Subtract: hc/2λ = 2eV, φ₀ = eV = hc/4λ, so λ₀ = 4λ |
| 25 | a | N = 2/3.01 × 10⁻¹⁹ = 6.6 × 10¹⁸; divide by 4π(3)² = 113: 5.9 × 10¹⁶ |
| 26 | a | New K = 2hν − φ₀ = 2K + φ₀ |
| 27 | b | K = 4 eV and 1 eV; v ∝ √K gives 2 |
| 28 | d | F = (1 + 0.4)P/c = 1.4 × 20 / 3 × 10⁸ ≈ 9.3 × 10⁻⁸ N |
| 29 | b | Same slope is because h is universal, not because φ₀ differs |
| 30 | c | Intensity changes photon number, not photon energy |
Chapter 3 revision sheet
One-page summary
Planck (1900): energy is exchanged in packets of size hν. Einstein (1905): light itself travels as such packets, later called photons.
Photon energy E = hν = hc/λ. In eV with λ in nm: E = 1240/λ.
Photon momentum p = h/λ = E/c. Rest mass zero, charge zero, speed c in vacuum.
One photon gives all its energy to one electron. Part pays the work function; the rest is kinetic energy.
Einstein's equation: Kₘₐₓ = hν − φ₀ = eV₀.
Threshold: φ₀ = hν₀ = hc/λ₀. Emission happens only for ν above ν₀, that is λ below λ₀.
Kₘₐₓ against ν: straight line, slope h, cuts the energy axis at −φ₀ and the ν axis at ν₀.
V₀ against ν: slope h/e, same for every metal.
Doubling ν does not double Kₘₐₓ (unless φ₀ were zero).
Photons per second from a source of power P: N = Pλ/hc = P/E.
Brighter light of the same colour means more photons per second, not more energy per photon.
Photon flux from a point source falls as 1/r².
Force of a beam of power P: P/c when absorbed, 2P/c when perfectly reflected.
Must-remember table
| Quantity | Formula | Shortcut or value |
|---|---|---|
| Photon energy | E = hν = hc/λ | E (eV) = 1240/λ (nm) |
| Photon momentum | p = h/λ = E/c | 6.63 × 10⁻³⁴/λ |
| Einstein's equation | Kₘₐₓ = hν − φ₀ | V₀ (V) = 1240/λ − φ₀ (eV) |
| Threshold wavelength | λ₀ = hc/φ₀ | λ₀ (nm) = 1240/φ₀ (eV) |
| Slope of V₀–ν | h/e | about 4.1 × 10⁻¹⁵ V s |
| Photons per second | N = Pλ/hc | 1 W at 620 nm gives about 3.1 × 10¹⁸ s⁻¹ |
| Force of light | P/c absorbed, 2P/c reflected | 3 W absorbed gives 10⁻⁸ N |
Memory aids
"1240 is the magic key": divide 1240 by λ in nm to get eV, or by φ₀ in eV to get λ₀ in nm.
"Pay the toll, keep the change": photon energy hν is the money, φ₀ is the toll at the surface, Kₘₐₓ is the change you keep.
"MERC" for photon properties: M = zero rest Mass, E = hν Energy, R = moves at the Rate c, C = zero Charge.
"Mirror doubles the push": reflected light gives 2P/c, absorbed light P/c.
Concept connections
Photon energy levels and line spectra continue in Physics Book 18: Atoms and Nuclei.
Momentum and force from photons use the impulse idea of Physics Book 3: Laws of Motion.
E = hν and the photon picture of light are used in Chemistry Book 2: Atomic Structure.
Practice MCQs: Chapter 3, Level 4 (new NEET pattern)
31. Match the quantity with its expression.
List I
A. Energy of a photon
B. Momentum of a photon
C. Threshold wavelength
D. Stopping potential
List II
(i) hc/φ₀
(ii) hc/λ
(iii) (hν − φ₀)/e
(iv) h/λ
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-i, D-iii
32. Match the wavelength of light with the energy of one photon.
List I
A. 620 nm
B. 310 nm
C. 124 nm
D. 496 nm
List II
(i) 2.5 eV
(ii) 10 eV
(iii) 2.0 eV
(iv) 4.0 eV
(a) A-iii, B-iv, C-ii, D-i (b) A-i, B-iv, C-ii, D-iii (c) A-iii, B-ii, C-iv, D-i (d) A-iv, B-iii, C-ii, D-i
33. Match the graph feature with what it gives.
List I
A. Slope of Kₘₐₓ–ν line
B. Slope of V₀–ν line
C. Intercept of Kₘₐₓ–ν line on the energy axis
D. Intercept of V₀–ν line on the ν axis
List II
(i) h/e
(ii) −φ₀
(iii) h
(iv) ν₀
(a) A-i, B-iii, C-ii, D-iv (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-ii, B-i, C-iii, D-iv
34. Match List I with List II (hc = 1240 eV nm, c = 3 × 10⁸ m/s).
List I
A. Photons per second from a 1 W source at 620 nm
B. Force of a 3 W beam fully absorbed by a surface
C. Force of a 3 W beam fully reflected at normal incidence
D. Energy of a photon of 3.2 × 10⁻¹⁹ J, in eV
List II
(i) 2.0 eV
(ii) 1.0 × 10⁻⁸ N
(iii) about 3.1 × 10¹⁸ s⁻¹
(iv) 2.0 × 10⁻⁸ N
(a) A-iii, B-iv, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-i, B-ii, C-iv, D-iii (d) A-ii, B-iii, C-iv, D-i
35. How many of the following statements about photons are correct?
A. A photon has zero rest mass.
B. All photons of one frequency carry the same energy.
C. The number of photons is conserved in every collision.
D. A photon is deflected by an electric field.
(a) 2 (b) 3 (c) 1 (d) 4
36. Choose the correct set of statements.
A. Kₘₐₓ depends linearly on the frequency of the light.
B. Kₘₐₓ is proportional to the intensity of the light.
C. The work function equals hν₀.
D. Doubling the frequency doubles Kₘₐₓ.
(a) A, B and C only (b) A and C only (c) B and D only (d) C and D only
37. A metal has φ₀ = 2.5 eV. How many statements are correct? (hc = 1240 eV nm)
A. Its threshold wavelength is about 496 nm.
B. Light of 400 nm ejects electrons from it.
C. Light of 600 nm ejects electrons from it.
D. Kₘₐₓ for 400 nm light is 0.6 eV.
(a) 1 (b) 2 (c) 3 (d) 4
38. Choose the correct set of statements.
A. Brighter light of the same colour carries more photons per second.
B. The energy of each photon is larger in brighter light.
C. Photon flux from a point source falls as 1/r².
D. The momentum of a photon equals E/c.
(a) A and B only (b) B, C and D only (c) A and C only (d) A, C and D only
39. A Kₘₐₓ–ν graph shows two parallel lines. Line X cuts the ν axis at 5.0 × 10¹⁴ Hz and line Y at 7.0 × 10¹⁴ Hz. Light of 6.0 × 10¹⁴ Hz falls on both metals. Which is correct? (h = 6.63 × 10⁻³⁴ J s)
(a) X gives Kₘₐₓ about 0.41 eV; Y gives no emission (b) Both give Kₘₐₓ about 0.41 eV (c) X gives Kₘₐₓ about 2.07 eV; Y gives no emission (d) X gives Kₘₐₓ about 0.83 eV; Y gives no emission
40. A student records the data below for one metal (hc = 1240 eV nm).
| λ (nm) | 248 | 310 |
|---|---|---|
| Kₘₐₓ (eV) | 2.7 | 1.7 |
The work function of the metal is:
(a) 1.0 eV (b) 3.3 eV (c) 2.3 eV (d) 2.7 eV
41. Stopping potential V₀ is plotted against 1/λ for one metal. The graph is a straight line. Its slope is:
(a) h/e (b) hc/e (c) hc (d) e/hc
Case for Q42–43. A 2.0 mW laser of wavelength 500 nm shines on a metal plate with φ₀ = 2.0 eV. Only 1 photon in every 1000 ejects an electron. All ejected electrons reach the collector. (h = 6.63 × 10⁻³⁴ J s, hc = 1240 eV nm)
42. The number of photons hitting the plate each second is about:
(a) 2.5 × 10¹⁵ (b) 1.0 × 10¹⁶ (c) 5.0 × 10¹⁸ (d) 5.0 × 10¹⁵
43. The photocurrent and the maximum kinetic energy of the electrons are about:
(a) 0.80 μA; 0.48 eV (b) 0.80 μA; 2.48 eV (c) 8.0 μA; 0.48 eV (d) 0.080 μA; 0.48 eV
44. Light of 300 nm gives a stopping potential of 1.6 V for a metal. For light of 200 nm on the same metal, the stopping potential is about (hc = 1240 eV nm):
(a) 2.40 V (b) 4.80 V (c) 3.67 V (d) 2.53 V
45. A 9 W beam falls normally on a surface that reflects 40% of the light and absorbs the rest. The force on the surface is:
(a) 3.0 × 10⁻⁸ N (b) 4.2 × 10⁻⁸ N (c) 6.0 × 10⁻⁸ N (d) 2.4 × 10⁻⁸ N
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | E = hc/λ, p = h/λ, λ₀ = hc/φ₀, V₀ = (hν − φ₀)/e |
| 32 | a | 1240/620 = 2.0, 1240/310 = 4.0, 1240/124 = 10, 1240/496 = 2.5 eV |
| 33 | c | Slopes h and h/e; Kₘₐₓ-axis intercept −φ₀; ν-axis intercept ν₀ |
| 34 | b | N = 1/(2.0 × 1.6 × 10⁻¹⁹) ≈ 3.1 × 10¹⁸; 3/c = 10⁻⁸ N; 2 × 3/c = 2 × 10⁻⁸ N; 3.2/1.6 = 2 eV |
| 35 | a | A and B true; photons can be created or absorbed (C false); no charge, so not deflected (D false) |
| 36 | b | Kₘₐₓ does not depend on intensity; doubling ν gives 2hν − φ₀, more than double |
| 37 | c | λ₀ = 1240/2.5 = 496 nm; 400 nm gives 3.1 eV, Kₘₐₓ = 0.6 eV; 600 nm is above λ₀ (C false) |
| 38 | d | Brightness changes photon number, not photon energy (B false) |
| 39 | a | Kₘₐₓ = h(6 − 5) × 10¹⁴ = 6.63 × 10⁻²⁰ J ≈ 0.41 eV; 6.0 × 10¹⁴ Hz is below Y's threshold |
| 40 | c | 1240/248 = 5.0 eV, 5.0 − 2.7 = 2.3 eV; check: 4.0 − 1.7 = 2.3 eV |
| 41 | b | V₀ = (hc/e)(1/λ) − φ₀/e |
| 42 | d | N = Pλ/hc = 2 × 10⁻³ × 500 × 10⁻⁹ / (6.63 × 10⁻³⁴ × 3 × 10⁸) ≈ 5.0 × 10¹⁵ |
| 43 | a | 5.0 × 10¹² electrons/s × 1.6 × 10⁻¹⁹ C ≈ 0.80 μA; 2.48 − 2.0 = 0.48 eV |
| 44 | c | φ₀ = 4.13 − 1.6 = 2.53 eV; 6.2 − 2.53 ≈ 3.67 V |
| 45 | b | F = (0.6 × 9)/c + 2(0.4 × 9)/c = 12.6/(3 × 10⁸) = 4.2 × 10⁻⁸ N |