Chapter 5 of 10 · 22 min read

Chapter 3: Processes of Recombinant DNA Technology

Recombinant DNA technology runs as a chain of steps: isolate DNA, cut it, amplify the gene, join it to a vector, put it into a host, grow the host at scale and purify the product. Each link must work for the final product to reach a patient or a farmer.

What you will learn

  • How pure DNA is isolated from bacterial, plant and fungal cells.

  • How DNA is cut, checked on a gel and joined to a vector.

  • PCR in detail: primers, the three steps, Taq polymerase and doubling.

  • How recombinant DNA enters a host and how transformants are picked.

  • How bioreactors, especially the stirred-tank type, grow cells at large scale.

  • What downstream processing involves.

3.1 Isolation of the genetic material (DNA)

In most organisms DNA is locked inside cells, wrapped up with other large molecules. We must first break the cell open and then clean the DNA.

The enzyme used to open the cell depends on its wall:

Cell typeWall made ofEnzyme used
BacteriumPeptidoglycanLysozyme
Plant cellCelluloseCellulase
FungusChitinChitinase

Once the cell bursts, DNA comes out mixed with RNA, proteins, polysaccharides and lipids. Each is removed separately:

  • RNA is removed with ribonuclease.

  • Proteins are removed with protease.

  • Other molecules are removed by suitable treatments.

Finally, chilled ethanol is added. Purified DNA comes out of solution as a collection of fine threads in the suspension. It can be spooled out on a glass rod, a bit like lifting sev out of a bowl.

3.2 Cutting DNA at specific locations

The purified DNA is incubated with a restriction enzyme under its optimal conditions (temperature, buffer). To check whether cutting worked, a sample is run on an agarose gel. Uncut DNA stays as one large band; cut DNA gives smaller bands.

The vector DNA is cut with the same restriction enzyme. Both now carry matching sticky ends. The gene of interest is cut out, mixed with the cut vector, and DNA ligase joins them. The result is recombinant DNA.

3.3 Amplifying the gene: the polymerase chain reaction (PCR)

Often the gene of interest is present in tiny amounts. PCR makes millions of copies of it in a test tube, without any living cell.

PCR needs:

  • the template DNA that contains the gene,

  • two primers: small, chemically synthesised oligonucleotides complementary to the two ends of the target region,

  • a heat-stable DNA polymerase,

  • the four deoxynucleotides (dATP, dGTP, dCTP, dTTP) and a suitable buffer,

  • a machine (thermal cycler) that changes temperature quickly.

Each cycle has three steps:

StepApproximate temperatureWhat happens
1. Denaturationabout 94 °CHydrogen bonds break; double-stranded DNA separates into two single strands.
2. Annealingabout 50–65 °C (depends on primers)The two primers bind (anneal) to their complementary sites on the single strands.
3. Extensionabout 72 °CDNA polymerase adds nucleotides to the primers and copies the region between them.

The DNA polymerase used is Taq polymerase, isolated from the bacterium Thermus aquaticus, which lives in hot springs. It is thermostable: it stays active through the high temperature of the denaturation step. An ordinary enzyme, such as the DNA polymerase of E. coli, would be destroyed in the first cycle.

Figure 3.1 · The three steps of a PCR cycle and exponential amplification
Figure 3.1 · The three steps of a PCR cycle and exponential amplification

The grey lines are template strands and the coloured ones are primers and new DNA; after every round of denaturation, annealing and extension the count doubles, so 30 cycles give about a billion copies.

Every cycle doubles the number of target DNA molecules. Starting with N₀ double-stranded molecules, after n cycles:

N=N0×2nN = N_0 \times 2^{n}

After 30 cycles, one molecule becomes 2³⁰ = 1,073,741,824 copies, roughly a billion. That is why we say PCR amplifies DNA "about a billion times". (This is the ideal number; real reactions are a little less efficient.)

The amplified fragment can then be ligated into a vector for cloning.

3.4 Inserting recombinant DNA into the host

Ligation of the gene into the vector gives recombinant DNA. Now it must enter a host.

  1. Host cells are made competent (Chapter 2: Ca²⁺, ice, heat shock; or micro-injection, biolistics, disarmed vectors).

  2. The cells take up the rDNA. This is transformation.

  3. Suppose the rDNA carries a gene for ampicillin resistance. The cells are spread on agar plates containing ampicillin.

  4. Only transformed cells survive. Untransformed cells die.

Here the ampicillin resistance gene works as the selectable marker.

3.5 Obtaining the foreign gene product

The aim of most rDNA work is a protein. When a foreign gene is expressed in a host under suitable conditions, the protein made is a recombinant protein. The host is called a heterologous host, because the gene came from a different organism.

A small flask of cells cannot give useful amounts. Two ideas raise the yield:

Continuous culture. Used medium is drained out from one side while fresh medium is added from the other. This keeps the cells in their most active log (exponential) phase. It gives more biomass and more product than a batch that is left to run down.

Bioreactors. These are large vessels, typically 100 to 1000 litres, where raw materials are converted into specific products by microbes, plant cells, animal cells or enzymes. A bioreactor gives the best growth conditions: temperature, pH, substrate, salts, vitamins and oxygen.

The most commonly used type is the stirred-tank bioreactor.

  • It is usually cylindrical or has a curved base to help mixing.

  • A stirrer (impeller) mixes the contents evenly and spreads oxygen through the whole vessel.

  • In a sparged stirred-tank reactor, sterile air is bubbled in through a sparger. Small bubbles give a large surface area for oxygen transfer.

A stirred-tank bioreactor has these systems:

SystemJob
Agitator systemMixes the culture evenly
Oxygen delivery systemSupplies sterile air or oxygen
Foam control systemBreaks foam that forms during growth
Temperature control systemKeeps temperature at the set value
pH control systemKeeps pH at the set value (acid/base addition)
Sampling portsLet small volumes be withdrawn to check progress
Figure 3.2 · A sparged stirred-tank bioreactor (schematic)
Figure 3.2 · A sparged stirred-tank bioreactor (schematic)

The motor turns the shaft and impellers to mix the culture, the sparger releases sterile air at the base, and probes plus acid or alkali addition hold pH and temperature steady.

Think of a giant pressure cooker with a mixer inside, a thermometer, a pH meter and an air pump, all sealed from dust and germs.

3.6 Downstream processing

Once biosynthesis ends, the product is still mixed with cells, medium and by-products. It must go through downstream processing before it can be sold:

  1. Separation and purification of the product.

  2. Formulation with suitable preservatives.

  3. For drugs: clinical trials to test safety and effect.

  4. Strict quality control testing.

The exact steps differ from product to product. Making an injectable hormone needs far stricter purification than making an enzyme for detergents.

Summary of the whole process

StageKey tool or method
Isolate DNALysozyme / cellulase / chitinase; ribonuclease; protease; chilled ethanol
Cut DNARestriction enzyme; check on agarose gel
Amplify genePCR with primers and Taq polymerase
Join to vectorDNA ligase
Put into hostCompetent cells; selectable marker
Grow and expressContinuous culture; stirred-tank bioreactor
Purify productDownstream processing

Worked examples: Chapter 3

Worked example 3.1: You must isolate DNA from (i) E. coli, (ii) spinach leaves, (iii) a mushroom. Which enzyme breaks open each?

Solution: (i) Lysozyme for the bacterial wall. (ii) Cellulase for the plant cell wall. (iii) Chitinase, since fungal walls contain chitin.

Worked example 3.2: A student's DNA extract is cloudy and full of protein and RNA. Which two enzymes should she add, and what is the final step?

Solution: Ribonuclease removes RNA; protease removes protein. Then she adds chilled ethanol so that the purified DNA precipitates as fine threads.

Worked example 3.3: A PCR starts with one double-stranded DNA molecule and runs 30 cycles. How many copies are made, ideally?

Solution: N = 1 × 2³⁰ = 1,073,741,824, about 1.07 × 10⁹ copies.

Worked example 3.4: A forensic sample has 5 copies of a target sequence. How many copies after 10 cycles?

Solution: N = 5 × 2¹⁰ = 5 × 1024 = 5120 copies.

Worked example 3.5: What is the fewest number of cycles needed to get at least 1000 copies from a single molecule?

Solution: 2⁹ = 512 is too few; 2¹⁰ = 1024 is enough. So 10 cycles.

Worked example 3.6: Why can't the DNA polymerase of E. coli replace Taq polymerase in PCR?

Solution: Each cycle starts at about 94 °C. The E. coli enzyme would be denatured in the first cycle and fresh enzyme would be needed every cycle. Taq polymerase from Thermus aquaticus survives these temperatures.

Worked example 3.7: A gene is cut with EcoRI and the vector with BamHI. Ligation gives no recombinants. Why?

Solution: EcoRI leaves AATT overhangs; BamHI leaves GATC overhangs. These are not complementary, so the ends cannot pair for ligase to seal. Both should be cut with the same enzyme.

Worked example 3.8: In a stirred-tank bioreactor growing aerobic bacteria, the oxygen level keeps dropping. Suggest two fixes from the reactor's design.

Solution: Increase stirring so oxygen spreads evenly, and sparge more sterile air as small bubbles, which raises the surface area for oxygen transfer.

Quick revision

  • Cell opening: lysozyme (bacteria), cellulase (plants), chitinase (fungi).

  • Clean-up: ribonuclease (RNA), protease (protein); chilled ethanol precipitates DNA.

  • Same restriction enzyme for gene and vector; ligase joins them.

  • PCR: denaturation → annealing → extension; Taq polymerase from Thermus aquaticus.

  • Copies after n cycles = N₀ × 2ⁿ; 30 cycles ≈ a billion-fold.

  • Ampicillin plate picks out cells carrying the ampᴿ marker.

  • Continuous culture keeps cells in log phase; bioreactors hold 100 to 1000 L.

  • Downstream processing: separation, purification, formulation, trials, quality control.

NEET traps

  • Lysozyme is for bacteria, not fungi. Fungi need chitinase.

  • Chilled ethanol precipitates DNA; it does not dissolve it.

  • The PCR step order is denaturation, annealing, extension. Annealing is the primer-binding step.

  • Taq polymerase is valued for heat stability, not for cutting or joining DNA.

  • 2ⁿ counts double-stranded copies from one molecule; multiply by the starting number if there are more.

  • Downstream processing comes after biosynthesis, not before.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The enzyme used to break open a bacterial cell for DNA isolation is (a) cellulase (b) chitinase (c) lysozyme (d) ribonuclease

2. To release DNA from fungal cells, the wall is digested with (a) lysozyme (b) cellulase (c) chitinase (d) protease

3. Purified DNA comes out of solution as fine threads when we add (a) hot distilled water (b) chilled ethanol (c) ethidium bromide (d) agarose

4. PCR stands for (a) polymerase chain reaction (b) protein chain reaction (c) primer copying reaction (d) plasmid cloning reaction

5. Taq polymerase is obtained from (a) Escherichia coli (b) Thermus aquaticus (c) Bacillus thuringiensis (d) Agrobacterium tumefaciens

6. The first step of every PCR cycle is (a) extension (b) denaturation (c) annealing (d) ligation

7. Primers used in PCR are (a) small, chemically synthesised oligonucleotides complementary to regions of the template (b) proteins that unwind DNA (c) RNA polymerase molecules (d) restriction enzymes

8. During DNA isolation, RNA is removed by treating with (a) ribonuclease (b) protease (c) lysozyme (d) ligase

9. The type of bioreactor most commonly used is the (a) photobioreactor (b) stirred-tank bioreactor (c) packed-bed reactor (d) fluidised-bed reactor

10. Separation and purification of a product after biosynthesis is called (a) downstream processing (b) upstream processing (c) elution (d) cloning

Level 2: NEET standard

11. The correct order of steps in one PCR cycle is (a) annealing, denaturation, extension (b) extension, annealing, denaturation (c) denaturation, annealing, extension (d) denaturation, extension, annealing

12. Taq polymerase is preferred in PCR because it (a) cuts DNA at palindromic sites (b) joins Okazaki fragments only (c) works only at 4 °C (d) stays active at the high temperatures used to separate DNA strands

13. Ideally, how many double-stranded copies does one DNA molecule give after 5 PCR cycles? (a) 10 (b) 25 (c) 32 (d) 64

14. Proteins in a DNA preparation are removed using (a) ribonuclease (b) lysozyme (c) protease (d) chitinase

15. Match the enzyme with its target. Column I: A. Lysozyme B. Cellulase C. Chitinase D. Ribonuclease Column II: i. Fungal cell wall ii. Plant cell wall iii. Bacterial cell wall iv. RNA (a) A-iii, B-ii, C-i, D-iv (b) A-ii, B-iii, C-i, D-iv (c) A-iii, B-i, C-ii, D-iv (d) A-iv, B-ii, C-i, D-iii

16. In continuous culture, cells are kept in the (a) log or exponential phase (b) lag phase (c) stationary phase (d) decline phase

17. A recombinant protein is (a) a protein made from the host's own gene (b) any enzyme taken from plants (c) a protein coded by ribosomal RNA (d) a protein coded by a foreign gene and made in a heterologous host

18. Which of these is NOT a part of a stirred-tank bioreactor? (a) Agitator system (b) Foam control system (c) pH control system (d) Electrophoresis chamber

19. In a sparged stirred-tank bioreactor, sterile air bubbles mainly (a) cool the culture (b) increase the surface area for oxygen transfer (c) remove foam (d) kill contaminating microbes

20. Large-scale bioreactors usually hold about (a) 100 to 1000 litres (b) 1 to 10 mL (c) 1 to 2 litres only (d) 10 to 100 mL

21. Downstream processing includes (a) cutting DNA with restriction enzymes (b) separation, purification and formulation with preservatives (c) PCR amplification (d) transformation of the host

22. E. coli cells transformed with a plasmid carrying an ampicillin resistance gene are selected by spreading them on (a) a medium without antibiotic (b) a medium containing ampicillin (c) a medium with lysozyme (d) a medium with only a chromogenic substrate

Level 3: Challenge

23. A PCR starts with 4 copies of a template. Ideally, after 8 cycles there will be (a) 32 copies (b) 512 copies (c) 2048 copies (d) 1024 copies

24. What is the fewest number of PCR cycles that gives at least one million copies from a single molecule? (a) 10 (b) 15 (c) 20 (d) 30

25. A gene is cut with EcoRI and the vector with BamHI. No recombinant forms after ligation. The best reason is (a) ligase was too active (b) the sticky ends are not complementary (c) both pieces had sticky ends (d) the gel was too thin

26. A batch culture stops giving product after a few days, while a continuous culture keeps giving it. The best explanation is that in continuous culture (a) no oxygen is used (b) the gene is absent (c) used medium is drained and fresh medium added, so cells stay in log phase (d) the medium is never sterilised

27. Arrange in order. P: ligation of the gene into the vector; Q: isolation of DNA; R: transfer of rDNA into the host; S: cutting with a restriction enzyme; T: downstream processing. (a) Q, P, S, R, T (b) S, Q, P, R, T (c) Q, S, R, P, T (d) Q, S, P, R, T

28. Before a recombinant drug reaches the market, it must pass (a) clinical trials and strict quality control testing (b) only gel electrophoresis (c) PCR amplification (d) blue-white screening

29. Assertion (A): In PCR, the reaction mixture is heated to a high temperature at the start of each cycle. Reason (R): Taq polymerase is obtained from a bacterium that lives in hot springs. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In a stirred-tank bioreactor, the stirrer helps even mixing and oxygen availability throughout the vessel. Statement II: Downstream processing follows exactly the same steps for every biotechnological product. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cLysozyme digests the bacterial wall.
2cFungal walls contain chitin.
3bChilled ethanol precipitates DNA.
4aPolymerase chain reaction.
5bTaq comes from Thermus aquaticus.
6bStrands are separated first.
7aPrimers are short synthetic oligonucleotides.
8aRibonuclease digests RNA.
9bStirred-tank is the most common type.
10aDefinition of downstream processing.
11cDenature, anneal, extend.
12dIt is thermostable.
13c2⁵ = 32.
14cProtease digests protein.
15aBacteria, plants, fungi, RNA in order.
16aFresh medium keeps cells in log phase.
17dForeign gene expressed in a heterologous host.
18dElectrophoresis is a lab separation method.
19bSmall bubbles raise oxygen transfer area.
20aTypical large vessels hold 100–1000 L.
21bSeparation, purification, formulation.
22bOnly ampᴿ cells survive on ampicillin.
23d4 × 2⁸ = 1024.
24c2¹⁹ = 524,288 is short; 2²⁰ = 1,048,576.
25bAATT and GATC overhangs do not pair.
26cContinuous feed keeps cells most active.
27dIsolate, cut, ligate, transfer, purify.
28aDrugs need trials and quality control.
29bHeating denatures DNA; R is true but is not why heating is done.
30cDownstream steps vary by product.

Chapter 3 revision sheet

One-page summary

  • Order of the process: isolate DNA → cut at specific sites → amplify the gene (PCR) → ligate into a vector → insert into a host → select transformants → grow in bulk → downstream processing.

  • DNA is wrapped in membranes, so cells are opened with enzymes: lysozyme (bacteria), cellulase (plants), chitinase (fungi).

  • RNA is removed with ribonuclease; proteins such as histones with protease.

  • Chilled ethanol precipitates purified DNA, seen as fine threads that can be spooled out.

  • DNA is cut with a restriction enzyme; agarose gel electrophoresis checks the digestion.

  • Gene and vector are cut with the same enzyme so their sticky ends match; DNA ligase joins them.

  • PCR needs template DNA, two primers, dNTPs and a thermostable DNA polymerase.

  • Each PCR cycle: denaturation → annealing → extension; each cycle roughly doubles the target.

  • Taq polymerase from Thermus aquaticus survives the high temperature of denaturation.

  • About 30 cycles give about a billion-fold amplification.

  • Recombinant DNA is put into competent host cells; an ampicillin plate selects cells carrying ampᴿ.

  • A protein made from a foreign gene in a host is a recombinant protein.

  • Continuous culture drains used medium and adds fresh medium, keeping cells in the log phase.

  • Bioreactors hold 100 to 1000 L; the stirred-tank type has an agitator, oxygen delivery (sparger), foam control, temperature and pH control, and sampling ports.

  • Downstream processing: separation, purification, formulation with preservatives, clinical trials for drugs, strict quality control.

N=N0×2nN = N_0 \times 2^{n}

Must-remember table

Step or itemFunctionKey fact
LysozymeBreaks bacterial cell wallBacteria
CellulaseBreaks plant cell wallPlants
ChitinaseBreaks fungal cell wallFungi
Ribonuclease / proteaseRemoves RNA / proteinsClean-up of DNA
Chilled ethanolPrecipitates DNAFine threads, spooled out
PrimersStart points for polymeraseShort, chemically synthesised
Taq polymeraseExtends primersThermostable, Thermus aquaticus
PCR copiesN = N₀ × 2ⁿ2¹⁰ = 1024
Stirred-tank bioreactorLarge-scale, controlled culture100 to 1000 L
Continuous cultureKeeps cells in log phaseMore product per run

Memory aids

  • "Little Cats Chase": Lysozyme for bacteria, Cellulase for plants, Chitinase for fungi (bacteria → plants → fungi in that order).

  • "D-A-E, then double": Denature, Anneal, Extend, and the copies double each round.

  • "Taq takes the heat": Taq polymerase is the enzyme that survives denaturation.

  • "SPF-CQ" for downstream processing: Separation, Purification, Formulation, Clinical trials, Quality control.

Concept connections

  • DNA polymerase, primers and base pairing come from replication in NEET Biology Book 7: Genetics and Evolution.

  • Fermenters and large-scale microbial production link to NEET Biology Book 8: Biology and Human Welfare.

  • Cell walls of bacteria, plants and fungi (peptidoglycan, cellulose, chitin) come from NEET Biology Book 1: Diversity in the Living World.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I with List II. List I: A. Lysozyme B. Cellulase C. Chitinase D. Ribonuclease List II: i. Removes RNA ii. Breaks the fungal cell wall iii. Breaks the bacterial cell wall iv. Breaks the plant cell wall (a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i

32. Match List I with List II. List I: A. Denaturation B. Annealing C. Extension D. Primers List II: i. Polymerase lengthens primers using dNTPs ii. Short synthetic oligonucleotides complementary to regions flanking the target iii. The two DNA strands separate at high temperature iv. Primers bind to their complementary sites (a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-ii, B-iv, C-i, D-iii

33. Match the parts of a stirred-tank bioreactor in List I with List II. List I: A. Agitator B. Sparger C. Foam control D. Sampling port List II: i. Withdraws small volumes to check the culture ii. Mixes the contents evenly iii. Bubbles sterile air into the medium iv. Stops froth from building up (a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-ii, B-iii, C-i, D-iv

34. Match List I with List II. List I: A. Separation B. Purification C. Formulation D. Clinical trials List II: i. Product mixed with suitable preservatives ii. Product taken out of the culture broth iii. Testing a drug in people before marketing iv. Removing impurities from the product (a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-iv, C-i, D-ii

35. Choose the correct set of statements. A. Chilled ethanol precipitates purified DNA. B. Precipitated DNA appears as fine threads. C. Protease is used to remove RNA. D. Chitinase is used to open plant cells. (a) A and B only (b) A, B and C only (c) B and D only (d) A, C and D only

36. How many of the following statements are correct? A. Taq polymerase is thermostable. B. Taq polymerase is isolated from Thermus aquaticus. C. PCR primers are chemically synthesised. D. Each PCR cycle roughly doubles the target DNA. E. DNA ligase must be added in every PCR cycle. (a) Two (b) Three (c) Four (d) Five

37. Choose the correct set of statements about bioreactors. A. They provide optimal temperature, pH, substrate, salts, vitamins and oxygen. B. Stirred-tank reactors are usually cylindrical or have a curved base to aid mixing. C. Shake flasks are the standard vessel for producing thousands of litres. D. Continuous culture keeps cells in the log phase. (a) A and C only (b) A, B and D only (c) B, C and D only (d) A, B, C and D

38. How many of the following statements are correct? A. Cutting the gene and the vector with the same restriction enzyme gives matching sticky ends. B. The progress of a restriction digest is checked by agarose gel electrophoresis. C. Recombinant DNA is introduced into competent host cells. D. On an ampicillin plate, cells carrying ampᴿ survive and others die. (a) Two (b) One (c) Three (d) Four

39. A graph shows target DNA copies (y-axis) against PCR cycle number (x-axis). At cycle 0 the graph reads 8 copies, and the value doubles every cycle. What will it read at cycle 4? (a) 32 (b) 128 (c) 64 (d) 40

40. A batch-culture growth curve of cell number against time shows a lag phase, then a steep log phase, then a flat stationary phase. In continuous culture, fresh medium is added and used medium drained so that the culture stays in which part of this curve? (a) Lag phase (b) Stationary phase (c) Decline phase (d) Log phase

41. One PCR cycle is run at three temperatures in this order.

StepTemperature
PAbout 94 °C
QAbout 55 °C
RAbout 72 °C

What are P, Q and R? (a) Annealing, denaturation, extension (b) Extension, annealing, denaturation (c) Denaturation, annealing, extension (d) Denaturation, extension, annealing

Case for Q42–43: A company makes a recombinant enzyme in E. coli. It first grows the bacteria in a 10 L flask in the lab. For sale, it moves to a 1000 L stirred-tank bioreactor. After growth, the broth contains cells, the enzyme and leftover medium.

42. Why does the company move from the flask to the bioreactor? (a) Large volumes under controlled conditions give the product on a large scale (b) Bioreactors make bacteria mutate faster (c) Flasks cannot hold E. coli (d) Bioreactors remove the need for downstream processing

43. What must be done next to get a saleable product from the broth? (a) Ligation (b) Transformation (c) PCR (d) Downstream processing: separation and purification

44. A PCR starts with 5 copies of a target. Assuming perfect doubling, how many copies are there after 8 cycles? (a) 40 (b) 640 (c) 1280 (d) 2560

45. Which sequence is correct for isolating DNA from plant tissue? (a) Lysozyme → ribonuclease → protease → chilled ethanol (b) Cellulase → ribonuclease and protease → chilled ethanol (c) Chitinase → chilled ethanol → protease (d) DNA ligase → cellulase → chilled ethanol

Level 4 answer key

QAnsReason
31dLysozyme = bacteria, cellulase = plants, chitinase = fungi, RNase = RNA
32bHeat separates strands, primers anneal, polymerase extends; primers are short synthetic oligos
33cAgitator mixes, sparger adds air, foam control stops froth, port takes samples
34aSeparate from broth, purify, add preservatives, then test in people
35aProtease removes protein, not RNA; chitinase is for fungi
36cA–D true; PCR uses no ligase
37bShake flasks are for small volumes only
38dAll four statements are correct
39b8 × 2⁴ = 128
40dContinuous culture holds cells in the log phase
41cHottest step separates strands; cooler step lets primers bind; 72 °C suits Taq
42aBioreactors give large volumes with controlled conditions
43dSeparation and purification follow biosynthesis
44c5 × 2⁸ = 1280
45bPlant walls need cellulase; then RNase and protease; ethanol precipitates DNA
22 min left
‹
›