Chapter 3 of 11 · 24 min read

Chapter 1: Matter, Its Nature and Classification

What you will learn

  • What matter is, and how solids, liquids and gases differ at the particle level.

  • How to sort any sample into element, compound, homogeneous mixture or heterogeneous mixture.

  • The difference between an atom, a molecule, an element and a compound, and what atomicity means.

  • The SI base units chemists use, and how to convert between units with unit factors.

  • How to count significant figures, round correctly and report a calculated answer.

  • The difference between precision and accuracy.

1.1 What is matter?

Matter is anything that has mass and takes up space. The chai in your cup, the steel of the cup, and the steam above it are all matter. Light and sound are not matter; they carry energy but have no mass of their own in the chemist's sense.

All matter is made of tiny particles. How tightly these particles are packed, and how freely they move, decides the state of matter.

FeatureSolidLiquidGas
ShapeDefiniteTakes the shape of the containerTakes the shape of the container
VolumeDefiniteDefiniteFills the whole container
Particle packingVery close, in fixed positionsClose, but can slide past each otherFar apart
Particle motionVibrate about fixed pointsMove around within the liquidMove fast and randomly
CompressibilityAlmost nilVery smallLarge

The three states change into one another when we change temperature or pressure. Ice melts to water on heating; water boils to steam in a pressure cooker. On cooling the changes run backwards. LPG is a gas at room pressure, but it is stored as a liquid in the cylinder because it is under high pressure.

1.2 Classifying matter

Chemists sort matter by asking two questions.

  1. Does the sample have a fixed composition? If yes, it is a pure substance. If no, it is a mixture.

  2. If it is a pure substance, can it be broken into simpler substances by chemical methods? If no, it is an element. If yes, it is a compound.

Mixtures are of two kinds.

  • A homogeneous mixture has the same composition throughout. Sugar dissolved in water, air, and brass (copper with zinc) are examples. Homogeneous mixtures are also called solutions.

  • A heterogeneous mixture has visibly different parts. Sand in water, a salad, and iron filings stirred with sulphur powder are examples.

Figure 1.1 · Classification of matter
Figure 1.1 · Classification of matter

Read the tree top down: first ask whether the composition is fixed, then whether a pure substance can be broken down chemically or whether a mixture looks the same throughout.

The parts of a mixture can be separated by physical methods: filtration, evaporation, distillation, a magnet, sublimation or chromatography. The parts of a compound can be separated only by chemical methods, such as electrolysis of water into hydrogen and oxygen.

1.3 Atom, molecule, element and compound

An atom is the smallest particle of an element that can take part in a chemical reaction. An atom of carbon and an atom of oxygen are different kinds of atom.

An element is a pure substance made of only one kind of atom. Carbon, sodium, oxygen and gold are elements. There are 118 known elements.

A molecule is the smallest particle of a substance that can exist on its own and still has all the properties of that substance. A molecule can be made of:

  • the same kind of atoms: O₂, N₂, O₃, P₄, S₈ (these are molecules of elements);

  • different kinds of atoms: H₂O, CO₂, NH₃, C₆H₁₂O₆ (these are molecules of compounds).

Noble gases (He, Ne, Ar) exist as single atoms. For them, the atom and the molecule are the same particle.

The number of atoms in one molecule of an element is its atomicity.

AtomicityNameExamples
1MonatomicHe, Ne, Ar
2DiatomicH₂, N₂, O₂, Cl₂
3TriatomicO₃ (ozone)
4TetratomicP₄ (white phosphorus)
8PolyatomicS₈ (rhombic sulphur)

A compound is a pure substance formed when two or more elements combine chemically in a fixed ratio by mass. Water always has hydrogen and oxygen in the mass ratio 1 : 8, whether it comes from a well in Rajasthan or a glacier in Ladakh.

Some compounds, like NaCl, do not exist as separate molecules. They are made of ions arranged in a giant lattice. For them we talk of a formula unit (one Na⁺ and one Cl⁻), not a molecule.

1.4 Compounds and mixtures compared

FeatureCompoundMixture
CompositionFixed ratio by massAny ratio
PropertiesNew properties, different from the elementsEach part keeps its own properties
SeparationOnly by chemical methodsBy physical methods
Energy change on formingUsually heat is given out or taken inUsually none
Melting or boiling pointSharp and fixedOver a range
ExampleIron sulphide, FeSIron filings with sulphur powder

Heat iron filings with sulphur and you get FeS, a black solid. A magnet no longer pulls the iron out. That is the sign that a compound has formed.

1.5 Properties and their measurement

A physical property can be observed or measured without changing what the substance is: colour, smell, melting point, boiling point, density. A chemical property shows only when the substance changes into something new: burning in air, reacting with acid, rusting.

To measure properties, scientists use the SI system. It has seven base units.

Physical quantitySI unitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
Electric currentampereA
Thermodynamic temperaturekelvinK
Amount of substancemolemol
Luminous intensitycandelacd

Common prefixes: kilo (10³), centi (10⁻²), milli (10⁻³), micro (10⁻⁶), nano (10⁻⁹), pico (10⁻¹²).

Mass and weight. Mass is the amount of matter in a body and does not change from place to place. Weight is the force of gravity on it, so it changes slightly with location. A chemical balance measures mass.

Volume. The SI unit is m³. In the lab we use smaller units.

1 L=1 dm3=1000 mL=1000 cm3,1 m3=1000 L1\ \mathrm{L} = 1\ \mathrm{dm^3} = 1000\ \mathrm{mL} = 1000\ \mathrm{cm^3}, \qquad 1\ \mathrm{m^3} = 1000\ \mathrm{L}

Density is mass per unit volume. Its SI unit is kg m⁻³; in the lab we often use g cm⁻³.

d=mV,1 g cm−3=1000 kg m−3d = \frac{m}{V}, \qquad 1\ \mathrm{g\,cm^{-3}} = 1000\ \mathrm{kg\,m^{-3}}

Temperature. Three scales are in use. The SI scale is kelvin.

T(K)=t(∘C)+273.15,t(∘F)=95 t(∘C)+32T(\mathrm{K}) = t(^{\circ}\mathrm{C}) + 273.15, \qquad t(^{\circ}\mathrm{F}) = \frac{9}{5}\,t(^{\circ}\mathrm{C}) + 32

The kelvin scale has no negative values. 0 K is absolute zero.

1.6 Scientific notation and significant figures

Chemistry deals with very large and very small numbers. One gram of hydrogen holds about 602 200 000 000 000 000 000 000 atoms. We write it as 6.022 × 10²³. This is scientific notation: N × 10ⁿ, with N between 1 and 10.

Every measurement has some uncertainty. Significant figures are the digits we know for certain plus one last digit that is estimated. Rules for counting them:

  1. All non-zero digits count. 285 has 3.

  2. Zeros between non-zero digits count. 2.008 has 4.

  3. Zeros to the left of the first non-zero digit do not count. 0.0032 has 2.

  4. Zeros at the right end count if there is a decimal point. 0.200 has 3; 2.50 has 3.

  5. Zeros at the right end without a decimal point are not counted by the usual rule. 500 has 1. Write 5.00 × 10² if you mean 3.

  6. In scientific notation, count the digits in N only. 6.0230 × 10²³ has 5.

  7. Exact numbers (counted objects, defined ratios like 1 m = 100 cm) have infinite significant figures.

Addition and subtraction. The answer keeps as many decimal places as the number with the fewest decimal places.

Multiplication and division. The answer keeps as many significant figures as the number with the fewest significant figures.

Rounding off. If the first digit dropped is more than 5, add 1 to the last kept digit. If less than 5, leave it. If it is exactly 5 (with nothing or only zeros after it), NCERT's rule is: leave the kept digit unchanged if it is even, add 1 if it is odd. So 4.65 → 4.6 and 4.75 → 4.8 when rounded to two figures.

Precision and accuracy. Precision is how close repeated readings are to one another. Accuracy is how close they are to the true value.

True mass 2.00 gReadings (g)Precise?Accurate?
Student A1.95, 1.94, 1.95YesNo
Student B1.94, 2.05, 2.01NoNo (average 2.00 by luck)
Student C2.01, 1.99, 2.00YesYes

1.7 Dimensional analysis (unit factor method)

To change units, multiply by a fraction equal to 1, such as (1000 g / 1 kg). The unit you want goes on top; the unit you want to cancel goes at the bottom.

3 days×24 h1 day×60 min1 h×60 s1 min=2.592×105 s3\ \mathrm{days} \times \frac{24\ \mathrm{h}}{1\ \mathrm{day}} \times \frac{60\ \mathrm{min}}{1\ \mathrm{h}} \times \frac{60\ \mathrm{s}}{1\ \mathrm{min}} = 2.592 \times 10^{5}\ \mathrm{s}

Units cancel like algebra. If the units do not cancel to what you want, a factor is upside down.

Worked example 1.1: Classify each as element, compound, homogeneous mixture or heterogeneous mixture: (i) brass (ii) dry ice (iii) mercury (iv) muddy river water (v) air (vi) glucose.

Solution: (i) Brass is copper and zinc mixed evenly: homogeneous mixture. (ii) Dry ice is solid CO₂: compound. (iii) Mercury is one kind of atom: element. (iv) Muddy water has visible particles: heterogeneous mixture. (v) Air is a uniform mix of N₂, O₂, Ar and CO₂: homogeneous mixture. (vi) Glucose, C₆H₁₂O₆, has a fixed composition: compound.

Worked example 1.2: How many atoms are present in one molecule of glucose, C₆H₁₂O₆, and in one molecule of rhombic sulphur?

Solution: Glucose: 6 + 12 + 6 = 24 atoms. Rhombic sulphur is S₈, so 8 atoms. Note that S₈ is an element even though its molecule has 8 atoms, because all 8 are sulphur.

Worked example 1.3: Normal body temperature is 37 °C. Express it in kelvin and in °F.

Solution: T = 37 + 273.15 = 310.15 K. In °F: (9/5)(37) + 32 = 66.6 + 32 = 98.6 °F.

Worked example 1.4: State the number of significant figures in (i) 0.005060 (ii) 2.300 × 10³ (iii) 100.0 (iv) 3200.

Solution: (i) Leading zeros do not count; 5, 0, 6 and the final 0 after the decimal do: 4. (ii) Digits of N are 2, 3, 0, 0: 4. (iii) Decimal point present, so all four digits count: 4. (iv) No decimal point, trailing zeros not counted: 2.

Worked example 1.5: Report with correct significant figures: (i) 12.11 + 18.0 + 1.012 (ii) 2.5 × 1.25.

Solution: (i) Sum = 31.122. The least number of decimal places is one (18.0), so the answer is 31.1. (ii) Product = 3.125. The least number of significant figures is two (2.5), so we keep two: 3.125 → 3.1.

Worked example 1.6: The density of a sample of mustard oil is 0.92 g cm⁻³. Express it in kg m⁻³.

Solution:

0.92 gcm3×1 kg1000 g×106 cm31 m3=920 kg m−30.92\ \frac{\mathrm{g}}{\mathrm{cm^3}} \times \frac{1\ \mathrm{kg}}{1000\ \mathrm{g}} \times \frac{10^{6}\ \mathrm{cm^3}}{1\ \mathrm{m^3}} = 920\ \mathrm{kg\,m^{-3}}

Shortcut: multiply g cm⁻³ by 1000 to get kg m⁻³.

Worked example 1.7: Evaluate (3.24 × 0.08666) / 5.006 and report it with the right number of significant figures.

Solution: The calculator gives 0.056088… The three numbers have 3, 4 and 4 significant figures. The answer takes the smallest, 3. So the answer is 0.0561. Leading zeros are not significant, so 0.0561 has exactly three.

Worked example 1.8: At what temperature do the kelvin and Fahrenheit scales show the same number?

Solution: Let the Celsius reading be t. We need t + 273.15 = 1.8t + 32. So 0.8t = 241.15 and t = 301.44 °C. Then the reading is 301.44 + 273.15 = 574.59, about 574.6 on both scales.

Quick revision

  • Matter has mass and occupies space. Solids have fixed shape and volume, liquids fixed volume only, gases neither.

  • Pure substance: fixed composition (element or compound). Mixture: variable composition (homogeneous or heterogeneous).

  • Compounds break down only by chemical means; mixtures separate by physical means.

  • Molecules can be of elements (O₂, P₄, S₈) or of compounds (H₂O). Noble gases are monatomic.

  • Seven SI base units; the mole is the SI unit of amount of substance.

  • 1 L = 1 dm³ = 1000 cm³; 1 g cm⁻³ = 1000 kg m⁻³; T(K) = t(°C) + 273.15.

  • Add or subtract: fewest decimal places. Multiply or divide: fewest significant figures.

  • Precision is agreement among readings; accuracy is closeness to the true value.

NEET traps

  • Calling O₃ or S₈ a compound because the molecule has many atoms. Same kind of atom means element.

  • Counting leading zeros in 0.00450 as significant. Only 4, 5 and the final 0 count: 3 figures.

  • Applying the significant-figure rule for multiplication to an addition problem. For sums, look at decimal places.

  • Writing 1 mL = 1 dm³. In fact 1 mL = 1 cm³ and 1 L = 1 dm³.

  • Thinking a set of close readings must be correct. Readings can be precise and still all wrong.

  • Rounding 2.345 to 2.35 in a sig-fig question. By the NCERT rule the kept digit 4 is even, so it stays: 2.34.

Practice MCQs: Chapter 1

Level 1: Concept check

1. Which of the following is a homogeneous mixture? (a) Sand in water (b) Brass (c) Iron filings with sulphur powder (d) Muddy water

2. Which of the following is a compound? (a) Diamond (b) Ozone (c) Air (d) Dry ice

3. The atomicity of a white phosphorus molecule is (a) 4 (b) 2 (c) 8 (d) 1

4. The SI base unit of amount of substance is the (a) gram (b) kilogram (c) mole (d) litre

5. The number of significant figures in 0.02040 is (a) 3 (b) 4 (c) 5 (d) 6

6. A room at 25 °C is at (a) 248.15 K (b) 298.15 K (c) 300.15 K (d) 25.15 K

7. Which of these is a chemical property? (a) Boiling point (b) Density (c) Colour (d) Flammability

8. One litre is equal to (a) 1 dm³ (b) 1 m³ (c) 10 cm³ (d) 100 mL

9. Which can be separated into its parts by physical methods alone? (a) A compound (b) An element (c) A mixture (d) A molecule

10. A gas has (a) a definite volume but no definite shape (b) a definite shape and a definite volume (c) a definite shape only (d) neither a definite shape nor a definite volume

Level 2: NEET standard

11. The sum 4.523 + 2.3 + 0.0156, reported correctly, is (a) 6.8386 (b) 6.839 (c) 6.84 (d) 6.8

12. The product 0.0450 × 2.2, reported correctly, is (a) 0.0990 (b) 0.099 (c) 0.1 (d) 0.09900

13. Using the NCERT rounding rule, 2.345 rounded to three significant figures is (a) 2.35 (b) 2.30 (c) 2.34 (d) 2.3

14. A liquid has density 0.80 g mL⁻¹. In SI units this is (a) 800 kg m⁻³ (b) 80 kg m⁻³ (c) 8000 kg m⁻³ (d) 0.80 kg m⁻³

15. The total number of atoms in one formula unit of K₄[Fe(CN)₆] is (a) 11 (b) 13 (c) 17 (d) 21

16. The true mass of a sample is 5.00 g. A student's three readings are 4.40 g, 4.41 g and 4.40 g. The readings are (a) accurate and precise (b) precise but not accurate (c) accurate but not precise (d) neither accurate nor precise

17. Which pair contains only elements? (a) O₃ and S₈ (b) H₂O and O₂ (c) NaCl and Na (d) CO and Co

18. Which statement is NOT true for a compound? (a) Its elements are present in a fixed ratio by mass. (b) Its properties differ from those of its elements. (c) Its composition can vary from sample to sample. (d) It can be broken down only by chemical methods.

19. A fever thermometer reads 98.6 °F. In Celsius this is (a) 33 °C (b) 35 °C (c) 40 °C (d) 37 °C

20. The Celsius and Fahrenheit scales show the same number at (a) 0 (b) −40 (c) 40 (d) −32

21. The number of significant figures in 6.0230 × 10²³ is (a) 3 (b) 4 (c) 5 (d) 23

22. A volume of 2.5 dm³ is equal to (a) 2.5 × 10⁻³ m³ (b) 2.5 × 10⁻² m³ (c) 2.5 × 10³ m³ (d) 2.5 × 10⁻⁶ m³

Level 3: Challenge

23. The value of (3.24 × 0.08666) / 5.006, reported correctly, is (a) 0.05609 (b) 0.0561 (c) 0.056 (d) 0.05608837

24. A metal cube of edge 2.00 cm has a mass of 63.2 g. Its density in SI units is (a) 7.90 kg m⁻³ (b) 3.16 × 10⁴ kg m⁻³ (c) 7.90 × 10⁻³ kg m⁻³ (d) 7.90 × 10³ kg m⁻³

25. Which set contains only pure substances? (a) Air, brass, graphite (b) Sea water, sugar, iron (c) Graphite, glucose, distilled water (d) Lassi, common salt, copper

26. The kelvin and Fahrenheit scales show the same numerical reading at about (a) 574.6 (b) 301.4 (c) −40 (d) 459.7

27. The value of (12.5 + 0.035) × 2.0, reported correctly, is (a) 25.07 (b) 25.1 (c) 25 (d) 25.0

28. A bond length of 2.5 Å expressed in nanometres is (a) 25 nm (b) 0.25 nm (c) 2.5 nm (d) 0.025 nm

29. Assertion (A): Iron filings mixed with sulphur powder can be separated with a magnet. Reason (R): In a mixture, each component keeps its own properties. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Every molecule is made of atoms of two or more different elements. Statement II: Noble gases exist as single atoms. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bBrass is a uniform alloy of Cu and Zn.
2dDry ice is solid CO₂; the others are elements or a mixture.
3aWhite phosphorus is P₄.
4cThe mole is one of the seven SI base units.
5bDigits 2, 0, 4, 0 count; leading zeros do not.
6b25 + 273.15 = 298.15 K.
7dBurning changes the substance.
8a1 L = 1 dm³ = 1000 cm³.
9cMixture parts keep their identity.
10dGases fill any container.
11dSum 6.8386; fewest decimals is one (2.3).
12b0.099; 2.2 limits it to two figures.
13cDropped digit is 5 and kept digit 4 is even.
14aMultiply g cm⁻³ by 1000.
15c4 K + 1 Fe + 6 C + 6 N = 17.
16bReadings agree but are far from 5.00 g.
17aEach has one kind of atom.
18cCompounds have fixed composition.
19d(98.6 − 32) × 5/9 = 37.
20bt = 1.8t + 32 gives t = −40.
21cDigits of 6.0230 are five.
22a1 dm³ = 10⁻³ m³.
23b0.056088; 3.24 limits to three figures.
24d63.2 / 8.00 = 7.90 g cm⁻³ = 7.90 × 10³ kg m⁻³.
25cAll three have fixed composition.
26at + 273.15 = 1.8t + 32 gives t = 301.44 °C, reading 574.6.
27c12.535 × 2.0 = 25.07; two figures give 25.
28b1 Å = 0.1 nm.
29aIron stays magnetic because it is not combined.
30dO₂ is a molecule of one element; noble gases are monatomic.

Chapter 1 revision sheet

One-page summary

  • Matter has mass and occupies space; it exists as solid, liquid or gas.

  • Pure substances: elements (one kind of atom) and compounds (elements joined in a fixed mass ratio).

  • Mixtures: homogeneous (one phase, e.g. brass, air, sugar solution) or heterogeneous (visible parts, e.g. muddy water, smoke).

  • A compound can be broken into its elements only by chemical methods; a mixture can be separated by physical methods.

  • Atomicity = atoms in one molecule: He 1, O₂ 2, O₃ 3, P₄ 4, S₈ 8.

  • Physical properties are observed without changing identity; chemical properties need a chemical change.

  • Seven SI base units: m, kg, s, A, K, mol, cd.

  • Density d = m / V; 1 g cm⁻³ = 1000 kg m⁻³.

  • T (K) = t (°C) + 273.15; °F = 1.8 × °C + 32; °C and °F are equal at −40.

  • Significant figures: all non-zero digits count; zeros between them count; leading zeros never count; trailing zeros count only after a decimal point.

  • Add/subtract: keep the fewest decimal places. Multiply/divide: keep the fewest significant figures.

  • Exact numbers (counted items, defined values) have unlimited significant figures.

  • Precision = closeness of repeated readings to each other; accuracy = closeness to the true value.

  • Dimensional analysis: multiply by unit factors equal to 1 so unwanted units cancel.

Must-remember table

ItemValue or rule
1 L1 dm³ = 1000 cm³ = 10⁻³ m³
1 Å / 1 nm / 1 pm10⁻¹⁰ m / 10⁻⁹ m / 10⁻¹² m
Prefixesmega 10⁶, kilo 10³, milli 10⁻³, micro 10⁻⁶, nano 10⁻⁹
KelvinK = °C + 273.15
Fahrenheit°F = 1.8 °C + 32
Densityd = m / V (g cm⁻³ or kg m⁻³)
Scientific notationN × 10ⁿ with 1 ≤ N less than 10

Memory aids

  • "My Kid Sees A Kite Mostly Climbing": the seven SI base units m, kg, s, A, K, mol, cd.

  • "Leading zeros Lie, trailing zeros Tell (after a point)": leading zeros are never significant; trailing zeros count only if a decimal point is written.

  • "Add by places, Multiply by figures": decimal places decide sums; significant figures decide products.

  • "Minus forty meets": −40 °C = −40 °F, the one meeting point of the two scales.

Concept connections

  • Units, significant figures and error analysis are treated fully in Physics Book 1: Physics and Measurement.

  • Separation of mixtures (distillation, chromatography) returns in Chemistry Book 13: Purification and Characterisation of Organic Compounds.

  • Homogeneous mixtures as solutions are the starting point of Chemistry Book 5: Solutions.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (physical quantity) with List II (SI unit).

List I

  • A. Amount of substance

  • B. Luminous intensity

  • C. Thermodynamic temperature

  • D. Electric current

List II

  • (i) kelvin

  • (ii) candela

  • (iii) ampere

  • (iv) mole

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-i, B-ii, C-iv, D-iii

32. Match List I (substance) with List II (class).

List I

  • A. Brass

  • B. Muddy water

  • C. Diamond

  • D. Glucose

List II

  • (i) Element

  • (ii) Compound

  • (iii) Homogeneous mixture

  • (iv) Heterogeneous mixture

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-i, B-iv, C-iii, D-ii

33. Match List I (number) with List II (number of significant figures).

List I

  • A. 0.00250

  • B. 2.0040

  • C. 6.022 × 10²³

  • D. 0.10

List II

  • (i) 2

  • (ii) 3

  • (iii) 4

  • (iv) 5

(a) A-ii, B-iii, C-iv, D-i (b) A-i, B-iv, C-iii, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-iii, D-i

34. Match List I (prefix) with List II (factor).

List I

  • A. nano

  • B. micro

  • C. mega

  • D. pico

List II

  • (i) 10⁻¹²

  • (ii) 10⁶

  • (iii) 10⁻⁹

  • (iv) 10⁻⁶

(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-ii, D-iii

35. How many of the following statements are correct?

  • A. Melting of ice is a physical change.

  • B. Air is a compound of nitrogen and oxygen.

  • C. A compound can be split into its elements only by chemical methods.

  • D. The components of a mixture keep their own properties.

  • E. The atomicity of rhombic sulphur (S₈) is 8.

(a) 4 (b) 3 (c) 2 (d) 5

36. Choose the correct set of statements about significant figures.

  • A. The trailing zeros in 2500 (no decimal point) are significant.

  • B. 0.0040 has two significant figures.

  • C. In multiplication, the answer keeps as many significant figures as the factor with the fewest.

  • D. A counted number such as "3 test tubes" has unlimited significant figures.

(a) A and B only (b) B, C and D only (c) A, C and D only (d) B and D only

37. The true mass of a weight is 2.00 g. Three students weigh it three times each: P gets 1.95, 1.96, 1.95 g; Q gets 2.01, 1.99, 2.00 g; R gets 1.80, 2.20, 2.05 g. Choose the correct set of statements.

  • A. P's readings are precise but not accurate.

  • B. Q's readings are both precise and accurate.

  • C. R's readings are precise.

  • D. Precision describes how close repeated readings are to each other.

(a) A and B only (b) B, C and D only (c) A, C and D only (d) A, B and D only

38. How many of the following are chemical properties?

  • A. Density of mercury

  • B. Combustibility of petrol

  • C. Reaction of sodium with water

  • D. Boiling point of water

  • E. Tendency of iron to rust

  • F. Blue colour of copper sulphate crystals

(a) 2 (b) 4 (c) 5 (d) 3

39. A student plots temperature in °F on the y-axis against the same temperature in °C on the x-axis. She gets a straight line. Its slope and y-intercept are:

(a) 1.8 and 32 (b) 0.56 and 32 (c) 1.8 and −32 (d) 0.56 and −17.8

40. The table gives the mass and volume of four metal samples.

SampleMass (g)Volume (cm³)
P13.55.0
Q21.66.0
R9.04.0
S39.55.0

Which sample could be aluminium (2.70 g cm⁻³) and which could be iron (7.9 g cm⁻³)?

(a) Q and S (b) R and Q (c) P and S (d) P and R

41. Two straight lines are drawn on the same axes: °F against °C, and K against °C (x-axis is °C for both). At their crossing point, the common y-value (°F reading = K reading) is about:

(a) 301.4 (b) 574.6 (c) −40 (d) 273.2

Questions 42–43 are based on this situation. A lab assistant in Jaipur fills a 20.0 mL density bottle with an unknown liquid. The liquid weighs 25.46 g on a balance.

42. The density of the liquid, reported with correct significant figures, is:

(a) 1.273 g mL⁻¹ (b) 1.27 g mL⁻¹ (c) 1.3 g mL⁻¹ (d) 1.2730 g mL⁻¹

43. The same density in SI units is:

(a) 1.27 kg m⁻³ (b) 1.27 × 10⁶ kg m⁻³ (c) 1.27 × 10³ kg m⁻³ (d) 12.7 kg m⁻³

44. A metal cube has an edge of 2.00 cm and a mass of 63.2 g. Its density in SI units, with correct significant figures, is:

(a) 7.9 × 10³ kg m⁻³ (b) 7.90 kg m⁻³ (c) 7.900 × 10⁻³ kg m⁻³ (d) 7.90 × 10³ kg m⁻³

45. The sum 12.11 + 18.0 + 1.012 is divided by 2.0. The answer with correct significant figures is:

(a) 15.56 (b) 15.6 (c) 16 (d) 15.5

Level 4 answer key

QAnsReason
31cmol, candela, kelvin, ampere.
32aBrass is an alloy (one phase); muddy water has visible particles; diamond is carbon; glucose is a compound.
33d0.00250 → 3; 2.0040 → 5; 6.022 → 4; 0.10 → 2.
34bnano 10⁻⁹, micro 10⁻⁶, mega 10⁶, pico 10⁻¹².
35aOnly B is wrong: air is a mixture. A, C, D, E are correct.
36bTrailing zeros without a decimal point are not taken as significant.
37dR's readings spread from 1.80 to 2.20 g, so they are not precise.
38dB, C and E involve a chemical change; A, D, F are physical.
39a°F = 1.8 °C + 32 is a line of slope 1.8 and intercept 32.
40cP: 13.5/5.0 = 2.70; S: 39.5/5.0 = 7.90 g cm⁻³.
41b1.8t + 32 = t + 273.15 gives t = 301.4 °C, so y = 574.6.
42b25.46/20.0 = 1.273; 20.0 has 3 significant figures, so 1.27.
43c1 g mL⁻¹ = 1000 kg m⁻³, so 1.27 × 10³ kg m⁻³.
44dV = 8.00 cm³; d = 7.90 g cm⁻³ = 7.90 × 10³ kg m⁻³ (3 s.f.).
45cSum = 31.1 (one decimal place); 31.1/2.0 = 15.55 → 2 s.f. = 16.
24 min left
‹
›