Chapter 7: Concentration Terms
What you will learn
What solute, solvent and solution mean.
Mass percent, volume percent, mass by volume percent and ppm.
Mole fraction, molarity and molality, and which of them change with temperature.
How to convert between molarity and molality using density.
How to dilute and mix solutions, and how to use molarity in stoichiometry.
7.1 Solutions
A solution is a homogeneous mixture of two or more substances. The component present in the larger amount is usually the solvent; the others are solutes. In a glass of nimbu-paani, water is the solvent; sugar, salt and lemon juice are solutes.
The concentration of a solution tells how much solute is present in a given amount of solution or solvent. Many reactions in the lab happen in solution, so stoichiometry needs concentration terms. (The Solutions unit in Class 12 builds on these.)
7.2 Percentage terms and ppm
A 10% w/w sugar solution has 10 g sugar in 100 g of solution, i.e. in 90 g of water. A saline drip in hospitals is 0.9% w/v NaCl: 0.9 g NaCl per 100 mL.
When the solute is present in tiny traces (fluoride in drinking water, lead in soil, CO in city air), percentages give awkward numbers. Then we use parts per million.
1 ppm means 1 g of solute in 10⁶ g of solution, or 1 mg per kg. For very dilute water solutions, 1 ppm is roughly 1 mg per litre. ppm can also be based on volume or moles; the question will say so.
7.3 Mole fraction
The mole fraction of a component is its moles divided by the total moles in the solution.
Mole fraction has no unit. For a solution with many components, all the mole fractions add up to 1.
7.4 Molarity
Molarity (M) is the number of moles of solute in one litre of solution.
The unit is mol L⁻¹, written M. A 1 M NaOH solution has 40 g NaOH in 1 L of solution, not in 1 L of water. To make it, dissolve 40 g NaOH in a little water in a volumetric flask, then add water up to the 1 L mark.
Molarity depends on temperature. Liquids expand on warming, so the same moles sit in a larger volume, and molarity falls slightly.
Molarity and moles: n = M × V (V in litres), or millimoles = M × V (V in mL). This is the bridge from solution to stoichiometry.
7.5 Molality
Molality (m) is the number of moles of solute per kilogram of solvent.
The unit is mol kg⁻¹, written m. Molality uses only masses, so it does not change with temperature. This makes it the preferred term in colligative properties.

If a term has a volume of solution in it, heating changes its value; to cross from one side to the other you need the density of the solution.
| Term | Definition | Unit | Changes with T? |
|---|---|---|---|
| Mass % | g solute per 100 g solution | none (%) | No |
| ppm | g solute per 10⁶ g solution | none | No |
| Mole fraction | mol of component / total mol | none | No |
| Molality | mol solute per kg solvent | mol kg⁻¹ | No |
| Molarity | mol solute per L solution | mol L⁻¹ | Yes |
| w/v % | g solute per 100 mL solution | g per 100 mL | Yes |
| v/v % | mL solute per 100 mL solution | none (%) | Yes |
7.6 Converting between terms
To move between a mass-based term and a volume-based term you need the density of the solution. A safe method is to assume a convenient amount (1 L of solution, or 100 g of solution, or 1 kg of solvent) and find everything for that amount.
Two results worth remembering:
In a very dilute aqueous solution, 1 L of solution is almost 1 kg of water, so molarity and molality are almost equal.
7.7 Dilution and mixing
Adding water changes the volume but not the moles of solute.
When two solutions of the same solute are mixed, the moles add and the volumes add (assume no volume change on mixing).
If the solutes are different but share an ion, find the moles of that ion from each solution, add them, and divide by the total volume.
Worked example 7.1: 5 g of NaCl is dissolved in 45 g of water. Find the mass percent of NaCl.
Solution: Mass of solution = 5 + 45 = 50 g. Mass % = 5/50 × 100 = 10%.
Worked example 7.2: A 5 kg sample of well water contains 15 mg of lead. Express the lead content in ppm.
Solution: ppm = (15 × 10⁻³ g / 5000 g) × 10⁶ = 3 ppm.
Worked example 7.3: 9.2 g of ethanol (C₂H₅OH) is mixed with 36 g of water. Find the mole fraction of each.
Solution: n(ethanol) = 9.2/46 = 0.2 mol. n(water) = 36/18 = 2 mol. x(ethanol) = 0.2/2.2 = 0.091. x(water) = 2/2.2 = 0.909. Check: 0.091 + 0.909 = 1.
Worked example 7.4: 4 g of NaOH is dissolved in water and the volume is made up to 250 mL. Find the molarity.
Solution: n = 4/40 = 0.1 mol. V = 0.250 L. M = 0.1/0.250 = 0.4 M.
Worked example 7.5: 6 g of urea (NH₂CONH₂, M = 60) is dissolved in 500 g of water. Find the molality.
Solution: n = 6/60 = 0.1 mol. Mass of solvent = 0.500 kg. m = 0.1/0.500 = 0.2 mol kg⁻¹.
Worked example 7.6: A bottle of concentrated sulphuric acid is labelled 98% H₂SO₄ by mass, density 1.84 g mL⁻¹. Find its molarity.
Solution: Take 1 L = 1000 mL of acid. Mass = 1000 × 1.84 = 1840 g. Mass of H₂SO₄ = 0.98 × 1840 = 1803.2 g. Moles = 1803.2/98 = 18.4. Molarity = 18.4 M.
Worked example 7.7: How much water must be added to 200 mL of 0.5 M HCl to make it 0.2 M?
Solution: M₁V₁ = M₂V₂ gives 0.5 × 200 = 0.2 × V₂, so V₂ = 500 mL. Water to add = 500 − 200 = 300 mL.
Worked example 7.8: 100 mL of 0.2 M glucose is mixed with 300 mL of 0.6 M glucose. Find the molarity of the mixture.
Solution: M = (0.2 × 100 + 0.6 × 300)/(100 + 300) = (20 + 180)/400 = 0.5 M.
Worked example 7.9: In an aqueous solution, the mole fraction of the solute is 0.1. Find the molality.
Solution: Take 1 mol of solution: 0.1 mol solute and 0.9 mol water. Mass of water = 0.9 × 18 = 16.2 g = 0.0162 kg. m = 0.1/0.0162 = 6.17 mol kg⁻¹.
Quick revision
Mass % = solute mass / solution mass × 100; ppm uses × 10⁶.
Mole fraction = n of component / total n; all add to 1; no unit.
Molarity = mol solute per L of solution; changes with temperature.
Molality = mol solute per kg of solvent; does not change with temperature.
M = 10 × mass % × d / M_solute. Use density to go between mass and volume terms.
Dilution: M₁V₁ = M₂V₂. Mixing: M = ΣMV / ΣV.
Moles in solution = M × V(L); millimoles = M × V(mL).
NEET traps
Dividing by litres of solvent for molarity. It is litres of solution.
Dividing by kg of solution for molality. It is kg of solvent.
Saying molality changes with temperature. Only volume-based terms change.
In a dilution question, giving the final volume when the question asks how much water to add.
Forgetting that CaCl₂ gives 2 Cl⁻ per formula unit when finding ion concentration.
Practice MCQs: Chapter 7
Level 1: Concept check
1. The unit of molarity is (a) mol kg⁻¹ (b) mol L⁻¹ (c) g L⁻¹ (d) it has no unit
2. Which concentration term does NOT depend on temperature? (a) Molarity (b) Mass by volume percent (c) Molality (d) Volume percent
3. In a two-component solution, the sum of the mole fractions is (a) 1 (b) 0 (c) 100 (d) 0.5
4. Parts per million is the mass of solute divided by the mass of solution, multiplied by (a) 100 (b) 10³ (c) 10⁹ (d) 10⁶
5. 4 g of NaOH is dissolved to make 1 L of solution. Its molarity is (a) 1 M (b) 0.1 M (c) 0.4 M (d) 4 M
6. Molality is the number of moles of solute per (a) litre of solution (b) kilogram of solution (c) kilogram of solvent (d) litre of solvent
7. 10 g of sugar is dissolved in 90 g of water. The mass percent of sugar is (a) 10% (b) 11.1% (c) 9% (d) 90%
8. 100 mL of a 1 M solution is diluted to 1 L. The new molarity is (a) 1 M (b) 0.01 M (c) 10 M (d) 0.1 M
9. The unit of mole fraction is (a) mol (b) mol L⁻¹ (c) none (d) mol kg⁻¹
10. Molarity of a solution changes with temperature because (a) the mass of solute changes (b) the volume of the solution changes (c) the moles of solute change (d) the solute decomposes
Level 2: NEET standard
11. 6 g of urea (M = 60) is dissolved in 250 g of water. The molality is (a) 0.4 m (b) 0.2 m (c) 0.1 m (d) 0.024 m
12. 23 g of ethanol is mixed with 36 g of water. The mole fraction of ethanol is (a) 0.25 (b) 0.5 (c) 0.2 (d) 0.8
13. Concentrated nitric acid is 63% HNO₃ by mass with density 1.4 g mL⁻¹. Its molarity is (a) 10 M (b) 14 M (c) 22.2 M (d) 6.3 M
14. The volume of water to be added to 250 mL of 0.8 M HCl to make it 0.5 M is (a) 400 mL (b) 250 mL (c) 100 mL (d) 150 mL
15. 200 mL of 0.3 M glucose is mixed with 300 mL of 0.8 M glucose. The molarity of the mixture is (a) 0.55 M (b) 0.5 M (c) 0.6 M (d) 1.1 M
16. 0.05 g of a pollutant is found in 2.5 kg of water. Its concentration is (a) 20 ppm (b) 2 ppm (c) 200 ppm (d) 0.02 ppm
17. The mass of NaCl in 250 mL of a 0.4 M solution is (a) 23.4 g (b) 5.85 g (c) 2.34 g (d) 11.7 g
18. The mole fraction of solute in a 1 molal aqueous solution is about (a) 0.1 (b) 0.5 (c) 0.982 (d) 0.0177
19. A 9% (w/v) glucose solution has a molarity of (a) 0.5 M (b) 0.05 M (c) 5 M (d) 1 M
20. The molality of a 10% (w/w) aqueous NaOH solution is about (a) 2.5 m (b) 0.25 m (c) 2.78 m (d) 3.0 m
21. For a very dilute aqueous solution, which is true? (a) Molality is much greater than molarity. (b) Mole fraction of solute is nearly 1. (c) Molarity is zero. (d) Molality and molarity are nearly equal in value.
22. The mass of NaOH needed to prepare 500 mL of a 0.2 M solution is (a) 8 g (b) 4 g (c) 2 g (d) 40 g
Level 3: Challenge
23. A 2.0 M aqueous urea solution (M = 60) has density 1.12 g mL⁻¹. Its molality is (a) 1.79 m (b) 2.0 m (c) 2.24 m (d) 1.0 m
24. The mole fraction of a solute in its aqueous solution is 0.2. The molality of the solution is about (a) 11.1 m (b) 0.2 m (c) 12.5 m (d) 13.9 m
25. Concentrated HCl is 36.5% HCl by mass with density 1.18 g mL⁻¹. Its molarity is (a) 11.8 M (b) 10 M (c) 36.5 M (d) 1.18 M
26. 50 mL of 0.4 M NaCl is mixed with 50 mL of 0.2 M CaCl₂. The concentration of Cl⁻ ions in the mixture is (a) 0.3 M (b) 0.6 M (c) 0.4 M (d) 0.2 M
27. The molarity of pure water (density 1 g mL⁻¹) is about (a) 55.6 M (b) 18 M (c) 1 M (d) 100 M
28. The volume of 0.25 M NaOH needed to neutralise 20 mL of 0.5 M H₂SO₄ completely is (a) 40 mL (b) 80 mL (c) 20 mL (d) 160 mL
29. Assertion (A): The molality of a solution does not change with temperature. Reason (R): Molality is defined using masses, which do not change with temperature. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: A 1 M aqueous NaCl solution contains 1 mol of NaCl per kilogram of water. Statement II: ppm is used to express very small concentrations such as pollutants in water. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Moles per litre of solution. |
| 2 | c | Based on masses only. |
| 3 | a | x₁ + x₂ = 1. |
| 4 | d | Parts per 10⁶. |
| 5 | b | 0.1 mol in 1 L. |
| 6 | c | Per kg of solvent. |
| 7 | a | 10/100 × 100. |
| 8 | d | 1 × 100 = M₂ × 1000. |
| 9 | c | Ratio of moles. |
| 10 | b | Liquids expand on heating. |
| 11 | a | 0.1 mol / 0.25 kg. |
| 12 | c | 0.5 / (0.5 + 2). |
| 13 | b | 63 × 1.4 × 10 / 63 = 14. |
| 14 | d | V₂ = 400 mL; add 150 mL. |
| 15 | c | (60 + 240) mmol / 500 mL. |
| 16 | a | 0.05/2500 × 10⁶. |
| 17 | b | 0.1 mol × 58.5 g. |
| 18 | d | 1 / (1 + 55.56). |
| 19 | a | 90 g L⁻¹ / 180. |
| 20 | c | 0.25 mol / 0.090 kg. |
| 21 | d | 1 L solution is nearly 1 kg water. |
| 22 | b | 0.1 mol × 40 g. |
| 23 | b | 1 L: 1120 g, 120 g urea, 1000 g water. |
| 24 | d | 0.2 mol per 0.8 × 18 = 14.4 g water. |
| 25 | a | 36.5 × 1.18 × 10 / 36.5. |
| 26 | c | (20 + 20) mmol Cl⁻ / 100 mL. |
| 27 | a | 1000/18 mol in 1 L. |
| 28 | b | 10 mmol acid needs 20 mmol NaOH. |
| 29 | a | Mass does not depend on temperature. |
| 30 | d | 1 M is per litre of solution, not per kg water. |
Chapter 7 revision sheet
One-page summary
A solution = solute(s) dissolved in a solvent (the component present in the larger amount).
Mass % (w/w) = mass of solute / mass of solution × 100; w/v % = grams of solute per 100 mL of solution.
ppm = mass of solute / mass of solution × 10⁶; used for very dilute solutions (hardness, pollutants).
Mole fraction x = moles of a component / total moles; all mole fractions add up to 1; no unit.
Molarity M = moles of solute / litres of solution; unit mol L⁻¹; changes with temperature.
Molality m = moles of solute / kg of solvent; unit mol kg⁻¹; does not change with temperature.
Mass-based terms (w/w %, ppm, x, m) are temperature-independent; volume-based terms (M, w/v %) are not.
Pure water is about 55.5 M (1000/18).
Molarity from mass % and density: M = (10 × d × w%) / M_solute, with d in g mL⁻¹.
Dilution: M₁V₁ = M₂V₂; moles of solute stay the same.
Mixing two solutions of one solute: M = (M₁V₁ + M₂V₂) / (V₁ + V₂).
In a very dilute aqueous solution, molarity and molality are almost equal.
Must-remember table
| Term | Formula | Unit | Changes with T? |
|---|---|---|---|
| Mass % | solute mass / solution mass × 100 | none | No |
| w/v % | g solute per 100 mL solution | g/100 mL | Yes |
| ppm | solute mass / solution mass × 10⁶ | none | No |
| Mole fraction | nᵢ / n_total | none | No |
| Molarity | mol / L of solution | mol L⁻¹ | Yes |
| Molality | mol / kg of solvent | mol kg⁻¹ | No |
Memory aids
"Molarity is in the Litre bottle, moLality is in the kiLogram of solvent": M uses solution volume, m uses solvent mass.
"Volume Varies": any term with volume in it changes with temperature.
"Fractions Finish at One": mole fractions always add up to 1.
"Ten-D-W over M": M = 10 × d × w% / molar mass.
Concept connections
Molality and mole fraction drive colligative properties and Raoult's law in Chemistry Book 5: Solutions.
Molar concentrations appear in K_c and pH expressions in Chemistry Book 6: Equilibrium.
Concentration and conductivity are linked in Chemistry Book 7: Redox Reactions and Electrochemistry.
Practice MCQs: Chapter 7, Level 4 (new NEET pattern)
31. Match List I (concentration term) with List II (unit).
List I
A. Molarity
B. Molality
C. Mole fraction
D. Mass by volume percentage
List II
(i) No unit
(ii) mol kg⁻¹
(iii) g per 100 mL of solution
(iv) mol L⁻¹
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-i, C-ii, D-iii
32. Match List I (solution) with List II (molarity).
List I
A. 4 g NaOH in 250 mL of solution
B. 5.85 g NaCl in 500 mL of solution
C. 9.8 g H₂SO₄ in 1 L of solution
D. 18 g glucose in 100 mL of solution
List II
(i) 0.1 M
(ii) 1.0 M
(iii) 0.4 M
(iv) 0.2 M
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-i, D-ii
33. Match List I (term) with List II (definition).
List I
A. Molarity
B. Molality
C. Mole fraction of solute
D. ppm by mass
List II
(i) Mass of solute ÷ mass of solution × 10⁶
(ii) Moles of solute ÷ kg of solvent
(iii) Moles of solute ÷ total moles
(iv) Moles of solute ÷ litres of solution
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-i, D-iii (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-iii, C-ii, D-i
34. Match List I (process) with List II (final molarity).
List I
A. 100 mL of 1 M diluted to 500 mL
B. 50 mL of 2 M diluted to 1 L
C. 25 mL of 4 M diluted to 200 mL
D. 100 mL of 0.2 M mixed with 100 mL of 0.6 M (same solute)
List II
(i) 0.5 M
(ii) 0.4 M
(iii) 0.2 M
(iv) 0.1 M
(a) A-iii, B-iv, C-ii, D-i (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
35. How many of the following statements are correct?
A. Molality does not change with temperature.
B. The mole fractions of all components of a solution add up to 1.
C. The molarity of pure water is about 55.5 M.
D. A 1 m and a 1 M aqueous solution of the same solute always have the same mass of solute per kg of water.
E. ppm is a convenient unit for very dilute solutions.
(a) 4 (b) 3 (c) 5 (d) 2
36. A 2 M NaOH solution has a density of 1.08 g mL⁻¹. Choose the correct set of statements (take 1 L of solution).
A. It contains 80 g of NaOH per litre.
B. Its molality is 2.0 mol kg⁻¹.
C. It is about 7.4% NaOH by mass.
D. The mole fraction of NaOH is 0.5.
(a) A and B only (b) A, B and C only (c) B, C and D only (d) A, B, C and D
37. How many of the following statements are correct?
A. The unit mol L⁻¹ is also written as M.
B. In a 1 m aqueous solution, the mole fraction of water is about 0.982.
C. Adding water to a solution changes the moles of solute.
D. M₁V₁ = M₂V₂ holds for dilution.
E. Mixing 100 mL of 0.1 M HCl with 100 mL of water gives 0.2 M HCl.
(a) 2 (b) 4 (c) 3 (d) 5
38. Choose the correct set of statements about mixing solutions of the same solute.
A. Mixing equal volumes of 0.2 M and 0.4 M NaCl gives 0.3 M.
B. Total moles of solute after mixing = sum of the moles mixed.
C. Mixing 1 L of 1 M with 1 L of 1 M gives a 2 M solution.
D. Volumes of dilute aqueous solutions are taken as additive.
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D
39. For a fixed amount of glucose, a graph of molarity (y-axis) against 1/V (x-axis, V in L) is a straight line through the origin with slope 0.05 mol. The mass of glucose, and the molarity when V = 250 mL, are:
(a) 9 g and 0.0125 M (b) 0.05 g and 0.2 M (c) 18 g and 0.4 M (d) 9 g and 0.2 M
40. Four urea solutions (M = 60 g mol⁻¹) are made.
| Solution | Urea (g) | Water (g) |
|---|---|---|
| P | 6 | 100 |
| Q | 3 | 25 |
| R | 12 | 400 |
| S | 30 | 250 |
Which two solutions have the same molality, and what is it?
(a) P and R; 1.0 m (b) Q and S; 2.0 m (c) P and S; 2.0 m (d) Q and R; 0.5 m
41. A water board tests three sources for Ca²⁺.
| Source | Mass of sample (g) | Mass of Ca²⁺ (g) |
|---|---|---|
| Well | 250 | 0.030 |
| River | 500 | 0.020 |
| Municipal tap | 200 | 0.012 |
Which source has the most Ca²⁺, and how much in ppm?
(a) River; 40 ppm (b) Municipal tap; 60 ppm (c) Well; 120 ppm (d) Well; 0.012 ppm
Questions 42–43 are based on this situation. A hospital pharmacy in Pune prepares 2.0 L of normal saline, which is 0.9% (w/v) NaCl.
42. The mass of NaCl needed is:
(a) 18 g (b) 9 g (c) 1.8 g (d) 180 g
43. The molarity of normal saline is about:
(a) 0.0154 M (b) 0.308 M (c) 0.900 M (d) 0.154 M
44. Commercial sulphuric acid is 98% H₂SO₄ by mass with density 1.84 g mL⁻¹. The volume of it needed to make 1.0 L of 0.92 M H₂SO₄ is:
(a) 25 mL (b) 50 mL (c) 100 mL (d) 5.0 mL
45. The mole fraction of ethanol in an aqueous solution is 0.20. The molality of ethanol is about:
(a) 11.1 m (b) 0.25 m (c) 13.9 m (d) 4.4 m
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | a | mol L⁻¹, mol kg⁻¹, no unit, g per 100 mL. |
| 32 | d | 0.1/0.25 = 0.4; 0.1/0.5 = 0.2; 0.1/1 = 0.1; 0.1/0.1 = 1.0 M. |
| 33 | c | Standard definitions. |
| 34 | b | 100/500 = 0.2; 100/1000 = 0.1; 100/200 = 0.5; (20 + 60)/200 = 0.4 M. |
| 35 | a | A, B, C, E correct; 1 M has solute per litre of solution, not per kg of water. |
| 36 | b | 1080 g solution − 80 g NaOH = 1000 g water, so m = 2.0; 80/1080 = 7.4%; x = 2/57.6 = 0.035. |
| 37 | c | A, B, D correct; dilution keeps moles; E halves to 0.05 M. |
| 38 | a | Moles add; 1 M + 1 M stays 1 M. |
| 39 | d | n = 0.05 mol × 180 = 9 g; M = 0.05/0.25 = 0.2 M. |
| 40 | b | P 0.1/0.1 = 1.0; Q 0.05/0.025 = 2.0; R 0.2/0.4 = 0.5; S 0.5/0.25 = 2.0 m. |
| 41 | c | Well 0.030/250 × 10⁶ = 120 ppm; river 40; tap 60. |
| 42 | a | 0.9 g per 100 mL × 2000 mL = 18 g. |
| 43 | d | 9 g L⁻¹ / 58.5 = 0.154 M. |
| 44 | b | M = 10 × 1.84 × 98/98 = 18.4 M; V = 0.92/18.4 L = 50 mL. |
| 45 | c | 0.20 mol ethanol per 0.80 mol water (14.4 g); m = 0.20/0.0144 = 13.9. |