Chapter 8 of 10 · 21 min read

Chapter 6: Electronegativity, Valence, Oxidation States and Chemical Reactivity

Every trend in this chapter follows from the earlier ones: small atoms with high ionisation enthalpy and very negative electron gain enthalpy pull shared electrons hard, form acidic oxides and behave as non-metals. Large atoms with low ionisation enthalpy do the opposite. Second-period elements and diagonal pairs are the special cases NEET asks about.

What you will learn

  • Electronegativity, the Pauling scale and its trends.

  • Valence and oxidation states across periods and down groups, and how to predict formulas.

  • Chemical reactivity of metals and non-metals, and the acid–base nature of oxides.

  • Why second-period elements behave differently from the rest of their groups.

  • The diagonal relationship: Li–Mg, Be–Al and B–Si.

6.1 Electronegativity

Electronegativity is the ability of an atom in a chemical compound to attract the shared electron pair towards itself. Unlike IE and ΔegH, it is not measured on an isolated atom, so it has no unit and is not a directly measurable energy. It is a relative number.

The common scale is Linus Pauling's, which sets fluorine at 4.0. Other scales (Mulliken, Allred–Rochow) give slightly different numbers but the same trends.

Period 2LiBeBCNOF
Pauling value1.01.52.02.53.03.54.0
Group 17FClBrI
Pauling value4.03.02.82.5

Trends:

  • Across a period, electronegativity increases. Smaller atoms with higher Z_eff pull the bonding pair harder.

  • Down a group, it decreases. The bonding pair is farther from a well-shielded nucleus.

  • F is the most electronegative element; Cs and Fr are the least.

What it tells you:

  • Non-metallic character rises with electronegativity; metallic character falls.

  • A large electronegativity difference between two atoms gives a polar or ionic bond. H–F (difference 1.9) is far more polar than H–I (difference about 0.4).

  • In a bond, the more electronegative atom takes the negative oxidation number.

6.2 Valence

Valence is the combining capacity of an element. For main group elements it equals either the number of valence electrons or 8 minus that number.

Group12131415161718
Valence electrons12345678
Common valence12343, 52, 61, 70, 8

Across a period, valence towards oxygen rises from 1 to 7, while valence towards hydrogen rises from 1 to 4 and then falls back to 1.

Period 3NaMgAlSiPSCl
HydrideNaHMgH₂AlH₃SiH₄PH₃H₂SHCl
Highest oxideNa₂OMgOAl₂O₃SiO₂P₄O₁₀SO₃Cl₂O₇

Down a group, the valence usually stays the same. That is why the formula of one member predicts the formula of the others: if Na forms Na₂O, Rb forms Rb₂O.

6.3 Oxidation states

The oxidation state is the charge an atom would carry if all its bonds were ionic, with shared electrons given to the more electronegative atom.

  • In OF₂, F (4.0) is more electronegative than O (3.5). Each F takes −1, so O is +2.

  • In Na₂O, O is more electronegative than Na, so O is −2 and Na is +1.

Patterns to remember:

  • s-block metals show a single oxidation state: +1 (group 1) or +2 (group 2).

  • p-block elements often show several states. The highest equals the group's valence electrons (N +5, S +6, Cl +7). Down groups 13 to 15, the lower state (two less than the group maximum) becomes more stable: Tl⁺, Pb²⁺, Bi³⁺. This is the inert pair effect, covered in the p-block book.

  • Fluorine, being most electronegative, shows only −1 in its compounds. Oxygen is usually −2.

  • Transition elements show many oxidation states (Mn from +2 to +7) because ns and (n−1)d electrons have similar energies.

6.4 Chemical reactivity across a period and down a group

Reactivity is highest at the two ends of a period.

  • On the left, alkali metals have the lowest IE and lose electrons very easily. They are the strongest reducing agents.

  • On the right, halogens have very negative ΔegH and high electronegativity. They are the strongest oxidising agents.

  • The middle elements and the noble gases are less reactive.

Down a group:

  • Metals become more reactive. IE falls, so electrons leave more easily. Li reacts gently with water, Na vigorously, K catches fire.

  • Non-metals become less reactive. The pull for extra electrons weakens. F₂ > Cl₂ > Br₂ > I₂ in oxidising power. This is why chlorine water can push iodine out of KI solution.

Transition metals are much less reactive than s-block metals. Gold and platinum are so unreactive they are called noble metals, which is why gold jewellery keeps its shine for generations.

6.5 Nature of oxides

Metals give basic oxides; non-metals give acidic oxides. Elements near the metal–non-metal border give amphoteric oxides, which react with both acids and bases.

Na2O+H2O→2NaOH(strong base)\mathrm{Na_2O + H_2O \rightarrow 2NaOH} \qquad \text{(strong base)}
Cl2O7+H2O→2HClO4(strong acid)\mathrm{Cl_2O_7 + H_2O \rightarrow 2HClO_4} \qquad \text{(strong acid)}
Al2O3+6HCl→2AlCl3+3H2O\mathrm{Al_2O_3 + 6HCl \rightarrow 2AlCl_3 + 3H_2O}
Al2O3+2NaOH+3H2O→2Na[Al(OH)4]\mathrm{Al_2O_3 + 2NaOH + 3H_2O \rightarrow 2Na[Al(OH)_4]}
Period 3 oxideNa₂OMgOAl₂O₃SiO₂P₄O₁₀SO₃Cl₂O₇
NatureStrongly basicBasicAmphotericWeakly acidicAcidicStrongly acidicMost strongly acidic
  • Across a period: basic → amphoteric → acidic.

  • Down a group: basic character increases (BeO amphoteric, MgO basic, CaO more basic).

  • Common amphoteric oxides: BeO, Al₂O₃, ZnO, SnO, PbO, Ga₂O₃.

  • Neutral oxides (neither acidic nor basic): CO, NO, N₂O.

Figure 6.1 · Summary of periodic trends across a period and down a group
Figure 6.1 · Summary of periodic trends across a period and down a group

Every trend in the right column is the mirror of the one on its left, so learning one direction gives you the other; remember the named exceptions from Chapters 4 and 5.

6.6 Anomalous behaviour of second-period elements

The first member of each group (Li, Be, B, C, N, O, F) differs from the rest of its group in many ways. Reasons:

  1. Very small size.

  2. High electronegativity and high ionisation enthalpy.

  3. High charge-to-radius ratio, which gives high polarising power.

  4. Only four valence orbitals (2s and three 2p), with no d orbitals in the valence shell.

Consequences:

FeatureSecond-period elementHeavier member
Maximum covalency4 (B forms [BF₄]⁻)Can exceed 4 (Al forms [AlF₆]³⁻)
Multiple bondsStrong pπ–pπ bonds: N≡N, C=C, C=O, O=OWeak pπ–pπ: phosphorus exists as P₄, sulfur as S₈
Covalent characterLi and Be compounds fairly covalentNa, Mg compounds mostly ionic
Fluorine and oxygenF shows only −1; O mostly −2Cl shows up to +7; S up to +6

6.7 Diagonal relationship

Some second-period elements resemble the element diagonally below and to the right in the third period more than their own group members.

Why? Moving right raises charge and electronegativity and shrinks size. Moving down does the opposite. Going diagonally, the two changes roughly cancel. So the pairs have similar size, similar charge-to-radius ratio (polarising power) and similar electronegativity.

Figure 6.2 · Diagonal relationship pairs Li–Mg, Be–Al and B–Si
Figure 6.2 · Diagonal relationship pairs Li–Mg, Be–Al and B–Si

Read each arrow as "behaves like": Li like Mg, Be like Al, B like Si; the matching colour below lists what each pair shares.

PairShared properties
Li and MgBurn in air to normal oxides (Li₂O, MgO), not peroxides; combine directly with N₂ to form nitrides (Li₃N, Mg₃N₂); carbonates decompose on heating; chlorides are deliquescent and soluble in ethanol; neither forms a solid bicarbonate
Be and AlOxides and hydroxides are amphoteric; chlorides are covalent, Lewis acidic and form bridged dimers in vapour; both are made passive by concentrated HNO₃
B and SiBoth are metalloids and semiconductors; oxides are acidic (B₂O₃, SiO₂); hydrides (boranes, silanes) are covalent and volatile; halides are hydrolysed by water

Worked examples

Worked example 6.1: Arrange C, N, O and F in increasing order of electronegativity.

Solution: All are in period 2; electronegativity rises across. C (2.5) < N (3.0) < O (3.5) < F (4.0).

Worked example 6.2: Predict the formula of the compound formed between aluminium and sulfur.

Solution: Al has valence 3; S has valence 2 (it needs two electrons). Cross the valences: Al₂S₃.

Worked example 6.3: An element A has Z = 12 and B has Z = 9. Predict the formula and bond type of their compound.

Solution: A is Mg (2,8,2), valence 2. B is F (2,7), valence 1. Formula: MgF₂. The electronegativity difference (4.0 − 1.2 = 2.8) is large, so the bond is ionic.

Worked example 6.4: Find the oxidation state of oxygen in OF₂ and of chlorine in Cl₂O₇.

Solution: OF₂: F is −1 each, total −2, so O = +2. Cl₂O₇: O total = 7 × (−2) = −14, so 2 Cl = +14, each Cl = +7.

Worked example 6.5: Classify Na₂O, Al₂O₃ and P₄O₁₀ as acidic, basic or amphoteric, with one reaction each.

Solution: Na₂O is basic: Na₂O + H₂O → 2NaOH. Al₂O₃ is amphoteric: it dissolves in HCl and in NaOH (equations above). P₄O₁₀ is acidic: P₄O₁₀ + 6H₂O → 4H₃PO₄.

Worked example 6.6: Boron forms [BF₄]⁻ but not [BF₆]³⁻, while aluminium forms [AlF₆]³⁻. Explain.

Solution: Boron's valence shell (n = 2) has only one 2s and three 2p orbitals, so it can form at most four bonds. Aluminium (n = 3) has 3d orbitals available and a larger size, so six F atoms fit around it and its covalency can reach 6.

Worked example 6.7: Lithium and magnesium are burnt separately in air. Compare the products.

Solution: Both give normal oxides (Li₂O, MgO) and also nitrides (Li₃N, Mg₃N₂) by reacting with nitrogen of air. Sodium, by contrast, gives mainly the peroxide Na₂O₂ and no nitride. This is the Li–Mg diagonal relationship.

Worked example 6.8: Which bond is more polar, H–F or H–Cl? Use H = 2.1, F = 4.0, Cl = 3.0.

Solution: Difference: H–F = 1.9; H–Cl = 0.9. H–F is more polar.

Worked example 6.9: An element has Z = 34. Predict its group, common valences, the formula of its hydride and highest oxide, and the nature of that oxide.

Solution: Z = 34 is [Ar] 3d¹⁰ 4s² 4p⁴: group 16 (selenium). Valence 2 towards hydrogen, so H₂Se. Highest oxidation state +6, so SeO₃. As a non-metal oxide it is acidic: it gives selenic acid, H₂SeO₄, with water.

Quick revision

  • Electronegativity: pull on a shared pair in a compound; Pauling scale, F = 4.0 highest.

  • Increases across a period, decreases down a group.

  • Valence: equal to valence electrons or 8 minus that; constant down a group.

  • O is +2 in OF₂; F is always −1.

  • Reactivity: highest at both ends of a period. Metals more reactive down, non-metals less reactive down.

  • Oxides: basic (left) → amphoteric (Al₂O₃) → acidic (right); basicity increases down a group.

  • Second-period anomalies: small size, high EN, no d orbitals, covalency max 4, strong pπ–pπ bonds.

  • Diagonal pairs: Li–Mg, Be–Al, B–Si (similar polarising power).

NEET traps

  • Calling electronegativity a measurable energy of an isolated atom. That is IE or ΔegH.

  • Giving O a −2 state in OF₂. It is +2.

  • Saying SiO₂ is basic because Si is "next to a metal". It is weakly acidic.

  • Pairing Be with Mg, or Li with Na, when the question asks for diagonal partners.

  • Saying reactivity of halogens increases down the group, like metals. It decreases.

  • Forgetting that Li forms a nitride directly, while Na does not.

Practice MCQs: Chapter 6

Level 1: Concept check

1. The most electronegative element is (a) O (b) Cl (c) F (d) N

2. Across a period from left to right, electronegativity generally (a) increases (b) decreases (c) stays constant (d) becomes zero

3. The valence of group 2 elements is (a) 1 (b) 2 (c) 3 (d) 4

4. Lithium shows a diagonal relationship with (a) Na (b) Be (c) Al (d) Mg

5. Which oxide is amphoteric? (a) Na₂O (b) Al₂O₃ (c) SO₃ (d) Cl₂O₇

6. The oxides of non-metals are generally (a) acidic (b) basic (c) amphoteric (d) neutral

7. The oxidation state of oxygen in OF₂ is (a) −2 (b) +1 (c) −1 (d) +2

8. The most reactive metal of period 3 is (a) Mg (b) Al (c) Na (d) Si

9. Down a group, electronegativity generally (a) increases (b) decreases (c) stays constant (d) changes randomly

10. Boron shows a diagonal relationship with (a) Si (b) Al (c) C (d) P

Level 2: NEET standard

11. The formula of the compound formed by aluminium and sulfur is (a) AlS (b) Al₃S₂ (c) Al₂S₃ (d) AlS₃

12. The most acidic oxide among the following is (a) SO₃ (b) P₄O₁₀ (c) SiO₂ (d) Cl₂O₇

13. Elements with Z = 12 and Z = 9 combine to form (a) MgF (b) MgF₂ (c) Mg₂F (d) MgF₃

14. The maximum covalency of boron is (a) 3 (b) 6 (c) 4 (d) 5

15. Which pair does NOT show a diagonal relationship? (a) Li and Mg (b) Be and Al (c) B and Si (d) Na and Al

16. The correct order of basic character is (a) Na₂O > MgO > Al₂O₃ (b) Al₂O₃ > MgO > Na₂O (c) MgO > Na₂O > Al₂O₃ (d) Al₂O₃ > Na₂O > MgO

17. Lithium and magnesium both (a) form superoxides when burnt (b) form nitrides by direct combination with N₂ (c) form stable peroxides as the main product in air (d) form solid bicarbonates

18. The highest oxidation state shown by chlorine is (a) +7 (b) +1 (c) +5 (d) +3

19. The halogen that shows only the −1 oxidation state in its compounds is (a) Cl (b) Br (c) F (d) I

20. The correct order of oxidising power of the halogens is (a) F₂ > Cl₂ > Br₂ > I₂ (b) I₂ > Br₂ > Cl₂ > F₂ (c) Cl₂ > F₂ > Br₂ > I₂ (d) Br₂ > Cl₂ > F₂ > I₂

21. An element with configuration [Ne] 3s² 3p⁴ forms a hydride of formula (a) XH₄ (b) H₂X (c) XH₃ (d) HX

22. Which bond has the greatest ionic character? (a) H–I (b) H–Br (c) H–Cl (d) H–F

Level 3: Challenge

23. The element with Z = 34 is expected to form a hydride and a highest oxide of formulas (a) H₂Se and SeO₃ (b) SeH₄ and SeO₂ (c) H₂Se and Se₂O₇ (d) SeH₃ and Se₂O₅

24. BeO and Al₂O₃ are both (a) strongly basic (b) acidic (c) neutral (d) amphoteric

25. The correct order of increasing acidic strength is (a) Cl₂O₇ < SO₃ < P₄O₁₀ < SiO₂ (b) SiO₂ < P₄O₁₀ < SO₃ < Cl₂O₇ (c) SO₃ < SiO₂ < Cl₂O₇ < P₄O₁₀ (d) P₄O₁₀ < SiO₂ < SO₃ < Cl₂O₇

26. The anomalous behaviour of second-period elements is mainly due to their (a) large size and low electronegativity (b) vacant d orbitals (c) small size, high electronegativity and absence of d orbitals (d) low ionisation enthalpy

27. Nitrogen exists as N₂ while phosphorus exists as P₄ because (a) phosphorus is more electronegative than nitrogen (b) nitrogen forms strong pπ–pπ multiple bonds, while phosphorus does not (c) nitrogen has vacant d orbitals (d) phosphorus is a gas

28. Which oxide gives the strongest base when dissolved in water? (a) Na₂O (b) MgO (c) Al₂O₃ (d) K₂O

29. Assertion (A): Lithium resembles magnesium more than sodium in many of its properties. Reason (R): Li⁺ and Mg²⁺ have similar polarising power (charge-to-radius ratio). (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Electronegativity, like ionisation enthalpy, is measured for an isolated gaseous atom. Statement II: Cl₂O₇ is a basic oxide. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cF = 4.0 on the Pauling scale.
2aZ_eff rises and size falls across.
3bTwo valence electrons.
4dLi and Mg are a diagonal pair.
5bAl₂O₃ reacts with acids and bases.
6aNon-metal oxides give acids with water.
7dF is −1 each, so O is +2.
8cNa has the lowest IE in period 3.
9bLarger, better-shielded atoms down a group.
10aB and Si are a diagonal pair.
11cValences 3 and 2 give Al₂S₃.
12dCl in its +7 state, farthest right.
13bMg (valence 2) with F (valence 1).
14cOnly 2s and 2p orbitals: four bonds.
15dNa and Al are not diagonal neighbours.
16aBasicity falls across period 3.
17bLi₃N and Mg₃N₂ form directly.
18aSeven valence electrons: up to +7.
19cF is the most electronegative element.
20aOxidising power falls down group 17.
21bSulfur, valence 2: H₂S.
22dLargest EN difference (1.9).
23aGroup 16: valence 2 to H, +6 in oxide.
24dBe–Al diagonal pair; both amphoteric.
25bAcidity rises across period 3.
26cSmall size, high EN, no 2d orbitals.
27bSmall N makes strong N≡N.
28dK is the most metallic; KOH is the strongest base.
29aSimilar charge/size explains the resemblance.
30bEN refers to a bonded atom; Cl₂O₇ is acidic.

Chapter 6 revision sheet

One-page summary

  • Electronegativity (EN) is the ability of an atom in a bond to pull the shared electron pair towards itself. It is not measured directly and has no unit.

  • Pauling scale values: F 4.0, O 3.5, N 3.0, Cl 3.0, C 2.5, H 2.1, Na 0.9, Cs 0.7.

  • Mulliken's idea: EN is the average of ionisation enthalpy and electron affinity, (IE + EA)/2.

  • EN increases across a period and decreases down a group. Non-metals have high EN, metals low EN.

  • Valence of representative elements = number of valence electrons, or 8 minus that number.

  • Oxidation state depends on EN: in OF₂ oxygen is +2 because F is more electronegative; in NaH hydrogen is −1.

  • Second-period elements are anomalous: small size, high EN, no d orbitals, so maximum covalency 4 (B forms [BF₄]⁻, Al forms [AlF₆]³⁻).

  • They also form strong pπ–pπ multiple bonds (C=C, N≡N, C=O).

  • Diagonal relationship: Li–Mg, Be–Al, B–Si, due to similar charge-to-size ratio.

  • Across a period, oxides go from basic → amphoteric → acidic (Na₂O, MgO basic; Al₂O₃ amphoteric; SiO₂, P₄O₁₀, SO₃, Cl₂O₇ acidic).

  • Neutral oxides: CO, NO, N₂O.

  • Reactivity is highest at the two ends of a period: alkali metals (lose electrons easily) and halogens (gain electrons easily).

  • Low IE = good reducing agent; high EN and very negative ΔegH = good oxidising agent (F₂ strongest).

Must-remember table

ItemFact or value
Most electronegativeF (4.0)
Least electronegative stable elementCs (0.7)
Equal Pauling ENN and Cl (3.0)
Basic oxidesNa₂O, K₂O, MgO, CaO
Amphoteric oxidesAl₂O₃, ZnO, BeO, SnO₂
Acidic oxidesCO₂, SiO₂, P₄O₁₀, SO₃, Cl₂O₇
Neutral oxidesCO, NO, N₂O
Diagonal pairsLi–Mg, Be–Al, B–Si
Maximum covalency, period 24
Oxide + waterNa₂O + H₂O → 2NaOH; Cl₂O₇ + H₂O → 2HClO₄

Memory aids

  • "FONCl" ladder: F > O > N ≈ Cl for electronegativity; read as "F-O-N-Cl", top four in that order.

  • "BAA" across period 3: Basic (Na, Mg), Amphoteric (Al), Acidic (Si to Cl).

  • "LiMg, BeAl, BSi" go downhill to the right: each diagonal pair steps one period down and one group right.

  • "No room upstairs": second-period atoms have no d orbitals, so they stop at covalency 4.

  • "CO-NO-N₂O are neutral friends": the three oxides that are neither acidic nor basic.

Concept connections

  • EN differences decide bond polarity, dipole moments and ionic character in Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Oxidation states and oxidising/reducing power link to Chemistry Book 7: Redox Reactions and Electrochemistry.

  • Acidic and basic oxides lead into the oxides and oxoacids of Chemistry Book 10: p-Block Elements.

Practice MCQs: Chapter 6, Level 4 (new NEET pattern)

31. Match the oxide in List I with its nature in List II.

List I:

  • A. Na₂O

  • B. Al₂O₃

  • C. Cl₂O₇

  • D. CO

List II:

  • i. Neutral

  • ii. Acidic

  • iii. Basic

  • iv. Amphoteric

(a) A-iii, B-ii, C-iv, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

32. Match the element in List I with its Pauling electronegativity in List II.

List I:

  • A. F

  • B. O

  • C. C

  • D. Cs

List II:

  • i. 2.5

  • ii. 0.7

  • iii. 4.0

  • iv. 3.5

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-ii, D-i

33. Match the species in List I with the oxidation state of the stated element in List II.

List I:

  • A. O in OF₂

  • B. Cl in Cl₂O₇

  • C. N in N₂O₅

  • D. H in NaH

List II:

  • i. −1

  • ii. +7

  • iii. +2

  • iv. +5

(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-i, D-iv (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-ii, C-iv, D-i

34. Match the feature in List I with the example in List II.

List I:

  • A. Maximum covalency of 4 in period 2

  • B. Strong pπ–pπ multiple bonding

  • C. Diagonal relationship

  • D. Amphoteric oxide of a period 2 metal

List II:

  • i. BeO

  • ii. Boron forms only [BF₄]⁻

  • iii. Li and Mg both form nitrides directly

  • iv. N₂ with a triple bond

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-ii, B-iv, C-i, D-iii

35. How many of the following statements are correct?

  • A. Electronegativity is a measurable property of an isolated atom.

  • B. Electronegativity increases from left to right across a period.

  • C. In OF₂, oxygen has a positive oxidation state.

  • D. Second-period elements expand their octet using d orbitals.

  • E. Fluorine is the most reactive non-metal.

(a) 2 (b) 4 (c) 3 (d) 5

36. Choose the correct set of statements.

  • A. Acid strength of oxides: Cl₂O₇ > SO₃ > P₄O₁₀.

  • B. Na₂O dissolves in water to give a basic solution.

  • C. Al₂O₃ reacts with both HCl and NaOH.

  • D. SiO₂ is a basic oxide.

(a) A and D only (b) A, B and C only (c) B and D only (d) All four

37. How many of these oxides are amphoteric: Al₂O₃, ZnO, BeO, MgO, CO₂, Na₂O, N₂O?

(a) 3 (b) 2 (c) 4 (d) 5

38. Choose the correct set of statements about lithium and magnesium.

  • A. Both form nitrides by direct reaction with nitrogen.

  • B. Both carbonates decompose on heating to the oxide and CO₂.

  • C. Both belong to the same group.

  • D. Their likeness comes from a similar charge-to-size ratio.

(a) A and C only (b) B and C only (c) A, B and C only (d) A, B and D only

39. Pauling electronegativities: H 2.1, C 2.5, N 3.0, O 3.5, F 4.0. Which bond has the largest electronegativity difference?

(a) O–H (b) C–H (c) N–H (d) H–F

40. A line graph shows Pauling electronegativity (y-axis) for F, Cl, Br, I (x-axis): 4.0, 3.0, 2.8, 2.5. What does the graph show and why?

(a) EN rises down the group as nuclear charge rises (b) EN stays constant down the group (c) EN falls down the group because atoms get larger and hold bonding electrons less tightly (d) EN falls because nuclear charge decreases down the group

41. On the Mulliken idea, EN = (IE + EA)/2 in eV, and Pauling value ≈ Mulliken value / 2.8. For an atom with IE = 12.97 eV and EA = 3.61 eV, the Pauling value is about

(a) 2.96 (b) 8.3 (c) 4.7 (d) 16.6

Case for Q42–43: A student shakes four oxides separately with water and tests each solution with litmus: Na₂O, P₄O₁₀, SO₃ and MgO. Two solutions turn red litmus blue, and two turn blue litmus red.

42. Which two oxides turn red litmus blue?

(a) Na₂O and SO₃ (b) P₄O₁₀ and SO₃ (c) MgO and P₄O₁₀ (d) Na₂O and MgO

43. In the reaction P₄O₁₀ + 6H₂O → 4H₃PO₄, how many moles of acid form from one mole of the oxide?

(a) 2 (b) 4 (c) 6 (d) 1

44. Which element shows oxidation states of −1, +1, +3, +5 and +7 in its compounds?

(a) F (b) O (c) Cl (d) N

45. The element with the highest electronegativity and the element with the most negative electron gain enthalpy are, respectively,

(a) F and Cl (b) F and F (c) Cl and F (d) Cl and Cl

Level 4 answer key

QAnsReason
31cNa₂O basic, Al₂O₃ amphoteric, Cl₂O₇ acidic, CO neutral
32aF 4.0, O 3.5, C 2.5, Cs 0.7
33dOF₂: +2; Cl₂O₇: +7; N₂O₅: +5; NaH: −1
34b[BF₄]⁻, N≡N, Li₃N/Mg₃N₂, BeO
35cB, C, E are correct; EN is a bonded-atom tendency; period 2 has no d orbitals
36bHigher oxidation state of the central atom gives a more acidic oxide; SiO₂ is acidic
37aAl₂O₃, ZnO, BeO; MgO and Na₂O basic, CO₂ acidic, N₂O neutral
38dLi is group 1, Mg group 2
39dDifferences: H–F 1.9, O–H 1.4, N–H 0.9, C–H 0.4
40cNuclear charge rises down the group, but added shells and shielding win
41a(12.97 + 3.61)/2 = 8.29 eV; 8.29/2.8 = 2.96
42dMetal oxides are basic; P₄O₁₀ and SO₃ give acids
43bRead the coefficient: 4H₃PO₄ per P₄O₁₀
44cCl uses vacant 3d orbitals for higher states; F shows only −1
45aF has the highest EN (4.0), but Cl has the most negative ΔegH (−349)
21 min left
‹
›