Chapter 5: Ionisation Enthalpy and Electron Gain Enthalpy
Ionisation enthalpy measures how hard it is to pull an electron out; electron gain enthalpy measures how much an atom welcomes an extra one. Both rise across a period and fall down a group, with a handful of exceptions that NEET loves: Be/B, N/O, Mg/Al, P/S, and Cl vs F.
What you will learn
Definitions of ionisation enthalpy (IE) and electron gain enthalpy (ΔegH), with equations and units.
Successive ionisation enthalpies and how a big jump reveals the group.
The factors that control IE: nuclear charge, size, shielding, penetration and stable configurations.
Trends across periods and down groups, with every standard exception explained.
Why Cl has a more negative ΔegH than F, and why noble gases have positive values.
5.1 Ionisation enthalpy
First ionisation enthalpy (IE₁ or ΔiH₁) is the energy needed to remove the most loosely held electron from an isolated gaseous atom in its ground state.
"Isolated gaseous atom" matters: in a solid or liquid, neighbouring atoms would change the energy. Energy must always be supplied, so IE is always positive.
Units: kJ mol⁻¹ for a mole of atoms, or eV per atom.
Successive ionisation enthalpies: removing the second, third and later electrons.
IE₂ is always greater than IE₁. After one electron leaves, the same protons hold fewer electrons, and it is harder to pull a negative electron away from a positive ion.
A very large jump appears when the next electron must come from a noble gas core. Count the electrons removed before the jump: that is the number of valence electrons.
| Element | IE₁ | IE₂ | IE₃ | IE₄ | Jump after | Group |
|---|---|---|---|---|---|---|
| Na | 496 | 4562 | — | — | 1st | 1 |
| Mg | 738 | 1451 | 7733 | — | 2nd | 2 |
| Al | 577 | 1817 | 2745 | 11577 | 3rd | 13 |
(All values in kJ mol⁻¹.)
5.2 Factors that decide ionisation enthalpy
Nuclear charge: more protons pull harder; IE rises.
Atomic size: a farther electron is held more weakly; IE falls.
Shielding by inner electrons: more shielding lowers Z_eff; IE falls.
Penetration of the orbital: for the same shell, s electrons get closest to the nucleus, then p, then d, then f. An s electron is harder to remove than a p electron of the same shell.
Stable configurations: completely filled (ns², np⁶) and exactly half-filled (np³) subshells are extra stable, so removing an electron from them costs more.
5.3 Trends in ionisation enthalpy
Across a period: IE generally increases. Z_eff rises and size shrinks, so electrons are held more tightly. Alkali metals have the lowest IE in each period; noble gases have the highest.
Down a group: IE decreases. The outer electron is in a higher shell, farther away and better shielded.
| Group 1 | Li | Na | K | Rb | Cs |
|---|---|---|---|---|---|
| IE₁ (kJ mol⁻¹) | 520 | 496 | 419 | 403 | 376 |
This is why caesium is used in photoelectric cells: light alone can knock its loosely held electron out.

IE rises across each period to a noble gas peak, then crashes at the next alkali metal; the small dips at B, Al (p electron) and O, S (paired p electron) are the exceptions explained in 5.4.
5.4 The exceptions across a period
The first IE does not rise smoothly. Two dips appear in every short period.
| Pair | IE₁ values (kJ mol⁻¹) | Why the first is higher |
|---|---|---|
| Be > B | 899 > 801 | Be loses a 2s electron; B loses a 2p electron, which penetrates less and is shielded by the 2s pair |
| Mg > Al | 738 > 577 | Same reason: 3s (Mg) vs 3p (Al) |
| N > O | 1402 > 1314 | N has a stable half-filled 2p³; in O (2p⁴) two electrons share one orbital and repel, so one leaves more easily |
| P > S | 1012 > 1000 | Same reason: half-filled 3p³ in P |
So the full order in period 2 is Li < B < Be < C < O < N < F < Ne, and in period 3 it is Na < Al < Mg < Si < S < P < Cl < Ar.
A group exception: down group 13, IE does not fall steadily. B 801, Al 577, Ga 579, In 558, Tl 589. Ga is slightly above Al because of poor shielding by its ten 3d electrons. Tl is above In because of poor shielding by the 4f and 5d electrons.
5.5 What ionisation enthalpy tells you
Metallic character: low IE means the atom gives up electrons easily, so it behaves as a metal.
Reducing power: elements with low IE are strong reducing agents (they donate electrons). The alkali metals are the strongest.
Valency: the position of the big jump in successive IEs gives the number of valence electrons.
Stable ions: Na forms Na⁺, never Na²⁺, because IE₂ of Na is about nine times its IE₁.
5.6 Electron gain enthalpy
Electron gain enthalpy (ΔegH) is the enthalpy change when an electron is added to an isolated gaseous atom to form a gaseous anion.
It can be negative (energy released) or positive (energy needed).
Halogens have the most negative values. Adding one electron gives them a noble gas configuration.
Noble gases have large positive values. The extra electron must enter a new, higher shell.
Group 2 elements and nitrogen have values near zero or positive, because the new electron would disturb a filled ns² or a half-filled np³ subshell.
Electron affinity is the related quantity often given as a positive number for the energy released. Roughly, electron affinity = −ΔegH. In NEET, "higher electron affinity" means "more negative ΔegH".
Second electron gain enthalpy is always positive. Adding an electron to an anion means forcing a negative electron onto a negative ion.
O²⁻ still exists in solid oxides like MgO because the large lattice energy pays for this cost.
5.7 Trends in electron gain enthalpy
Across a period: ΔegH generally becomes more negative, because Z_eff increases and the atom pulls an incoming electron harder. The halogen has the most negative value of its period.
Down a group: ΔegH generally becomes less negative, because the incoming electron goes farther from the nucleus.
The big exception, second period vs third period: F and O are so small that their 2p subshell is crowded. A new electron feels strong repulsion from the electrons already there. So F gains an electron less readily than Cl, and O less readily than S.
| Element | ΔegH (kJ mol⁻¹) | Element | ΔegH (kJ mol⁻¹) |
|---|---|---|---|
| F | −328 | O | −141 |
| Cl | −349 | S | −200 |
| Br | −325 | Se | −195 |
| I | −295 | Te | −190 |
Order for halogens (most negative first): Cl > F > Br > I. Chlorine has the most negative electron gain enthalpy of all elements.

In both groups the period 3 bar is the longest: Cl beats F and S beats O, and from period 3 downwards the values become steadily less negative.
| Noble gas | He | Ne | Ar | Kr | Xe |
|---|---|---|---|---|---|
| ΔegH (kJ mol⁻¹) | +48 | +116 | +96 | +96 | +77 |
5.8 Comparing the two quantities
| Feature | Ionisation enthalpy | Electron gain enthalpy |
|---|---|---|
| Process | Remove an electron from X(g) | Add an electron to X(g) |
| Sign | Always positive | Negative or positive |
| Across a period | Increases (dips at group 13 and 16) | Becomes more negative (halogen most) |
| Down a group | Decreases | Becomes less negative (F and O are exceptions) |
| High value means | Non-metallic, poor reducing agent | Good oxidising agent, non-metal |
Worked examples
Worked example 5.1: The first ionisation energy of sodium is 5.14 eV per atom. Express it in kJ mol⁻¹.
Solution: 5.14 × 96.49 = 496 kJ mol⁻¹.
Worked example 5.2: How much energy is needed to convert 2.43 g of gaseous Mg atoms into Mg²⁺ ions? IE₁ = 738, IE₂ = 1451 kJ mol⁻¹; molar mass 24.3 g mol⁻¹.
Solution: Moles = 2.43 / 24.3 = 0.100 mol. Energy per mole for both steps = 738 + 1451 = 2189 kJ. Energy = 0.100 × 2189 = 218.9 kJ.
Worked example 5.3: Element X has successive IEs of 738, 1451, 7733 and 10540 kJ mol⁻¹. Find its group.
Solution: The jump from 1451 to 7733 (more than five times) comes after the second electron. So X has two valence electrons: group 2 (it is Mg).
Worked example 5.4: Explain why the first IE of boron (801) is lower than that of beryllium (899).
Solution: Be is 1s² 2s²; B is 1s² 2s² 2p¹. In B the electron removed is a 2p electron. It penetrates less toward the nucleus than a 2s electron and is partly shielded by the 2s pair. So it is easier to remove, even though B has one more proton.
Worked example 5.5: Explain why oxygen (1314) has a lower first IE than nitrogen (1402).
Solution: N is 2p³, one electron in each 2p orbital: a stable half-filled set. O is 2p⁴, so one 2p orbital holds a pair. The two paired electrons repel each other, and removing one of them relieves that repulsion. Less energy is needed.
Worked example 5.6: Arrange Na, Mg, Al and Si in increasing order of first IE.
Solution: The general trend says IE rises across. But Al's 3p electron is easier to remove than Mg's 3s electron. Order: Na (496) < Al (577) < Mg (738) < Si (786).
Worked example 5.7: How much energy is released when 3.55 g of gaseous chlorine atoms change into Cl⁻ ions? ΔegH = −349 kJ mol⁻¹.
Solution: Moles = 3.55 / 35.5 = 0.100 mol. Energy released = 0.100 × 349 = 34.9 kJ.
Worked example 5.8: Calculate ΔH for Na(g) + Cl(g) → Na⁺(g) + Cl⁻(g). IE₁ of Na = 496, ΔegH of Cl = −349 kJ mol⁻¹. What does the sign tell you?
Solution: ΔH = 496 + (−349) = +147 kJ mol⁻¹. Making separate gaseous ions costs energy. NaCl still forms because the ions attract strongly in the crystal and release a large lattice energy.
Worked example 5.9: The first IE of hydrogen is 1312 kJ mol⁻¹. Find the longest wavelength of light that can ionise a hydrogen atom.
Solution: Energy per atom = 1312 × 10³ / (6.022 × 10²³) = 2.18 × 10⁻¹⁸ J. λ = hc/E = (6.626 × 10⁻³⁴ × 3.0 × 10⁸) / (2.18 × 10⁻¹⁸) = 9.12 × 10⁻⁸ m = 91.2 nm. Any longer wavelength carries too little energy.
Quick revision
IE: X(g) → X⁺(g) + e⁻, always positive; 1 eV per atom = 96.49 kJ mol⁻¹.
IE₁ < IE₂ < IE₃; a huge jump marks the noble gas core.
IE rises across a period, falls down a group. He has the highest IE of all; Cs among the lowest.
Dips: Be > B, Mg > Al (s vs p); N > O, P > S (half-filled stability).
ΔegH: X(g) + e⁻ → X⁻(g); halogens most negative, noble gases positive.
Cl is more negative than F; S more negative than O (small, crowded 2p shell).
Second ΔegH is always positive.
NEET traps
Writing the IE process for a solid, X(s). It is defined for isolated gaseous atoms.
Saying O has a higher IE than N because it is to the right. The half-filled 2p³ of N wins.
Saying F has the most negative ΔegH. It is Cl.
Mixing up signs: "higher electron affinity" means a more negative ΔegH.
Forgetting that second electron gain enthalpy is positive, even for oxygen.
Reading a successive-IE table and counting the electrons after the jump instead of before it.
Practice MCQs: Chapter 5
Level 1: Concept check
1. The first ionisation enthalpy of an atom is always (a) negative (b) zero (c) positive (d) either positive or negative
2. Within a period, the highest first ionisation enthalpy belongs to the (a) noble gas (b) halogen (c) alkali metal (d) alkaline earth metal
3. Down a group, first ionisation enthalpy generally (a) increases (b) decreases (c) stays constant (d) first increases, then decreases
4. The lowest first ionisation enthalpy among Li, Na, K and Cs is that of (a) Li (b) Na (c) K (d) Cs
5. The element with the most negative electron gain enthalpy is (a) F (b) Cl (c) Br (d) I
6. The electron gain enthalpy of noble gases is (a) large and negative (b) exactly zero (c) slightly negative (d) positive
7. For any atom, the second ionisation enthalpy is (a) greater than the first (b) smaller than the first (c) equal to the first (d) always zero
8. The element with the highest first ionisation enthalpy is (a) H (b) Ne (c) He (d) F
9. One electron volt per atom is equal to about (a) 9.65 kJ mol⁻¹ (b) 96.5 kJ mol⁻¹ (c) 965 kJ mol⁻¹ (d) 1.6 kJ mol⁻¹
10. The second electron gain enthalpy of oxygen is (a) negative (b) zero (c) positive (d) equal to the first
Level 2: NEET standard
11. The correct order of first ionisation enthalpy is (a) Be < B < C < N (b) B < Be < C < N (c) B < C < Be < N (d) N < C < Be < B
12. The first ionisation enthalpy of oxygen is lower than that of nitrogen because (a) oxygen is larger than nitrogen (b) oxygen has a lower nuclear charge (c) oxygen loses a 2s electron (d) nitrogen has a stable half-filled 2p subshell, while oxygen has a paired 2p electron
13. An element has successive ionisation enthalpies of 577, 1817, 2745 and 11577 kJ mol⁻¹. It belongs to group (a) 1 (b) 2 (c) 13 (d) 14
14. The first ionisation energy of lithium is 5.39 eV per atom. In kJ mol⁻¹ this is about (a) 520 (b) 52.0 (c) 5200 (d) 539
15. The correct order of first ionisation enthalpy for Na, Mg and Al is (a) Na < Mg < Al (b) Al < Na < Mg (c) Na < Al < Mg (d) Mg < Al < Na
16. Fluorine has a less negative electron gain enthalpy than chlorine because (a) F has a larger size (b) the added electron enters a small, crowded 2p subshell and is repelled (c) F has fewer protons than Cl, so it cannot hold electrons (d) F is a metal
17. ΔegH of Cl is −349 kJ mol⁻¹. The energy released when 7.1 g of gaseous Cl atoms form Cl⁻ ions is (a) 34.9 kJ (b) 349 kJ (c) 698 kJ (d) 69.8 kJ
18. The most negative electron gain enthalpy among O, Se, S and Te is that of (a) O (b) Se (c) S (d) Te
19. The electron gain enthalpy of nitrogen is close to zero because (a) its half-filled 2p subshell is stable and resists an extra electron (b) it is a metal (c) it has a very large size (d) it has a full 2p subshell
20. IE₁ of Na = 496 kJ mol⁻¹ and ΔegH of Cl = −349 kJ mol⁻¹. ΔH for Na(g) + Cl(g) → Na⁺(g) + Cl⁻(g) is (a) −147 kJ mol⁻¹ (b) +845 kJ mol⁻¹ (c) +147 kJ mol⁻¹ (d) −845 kJ mol⁻¹
21. Which has the higher first ionisation enthalpy? (a) S (b) P (c) both are equal (d) cannot be predicted
22. A low first ionisation enthalpy usually goes with (a) high non-metallic character (b) strong oxidising power (c) high electronegativity (d) strong metallic and reducing character
Level 3: Challenge
23. The first ionisation enthalpy of hydrogen is 1312 kJ mol⁻¹. The longest wavelength of light that can ionise a hydrogen atom is about (a) 91.2 nm (b) 121.6 nm (c) 9.12 nm (d) 656 nm
24. For Mg, IE₁ = 738 and IE₂ = 1451 kJ mol⁻¹ (molar mass 24.3 g mol⁻¹). The energy needed to convert 2.43 g of Mg(g) into Mg²⁺(g) is (a) 73.8 kJ (b) 145.1 kJ (c) 218.9 kJ (d) 2189 kJ
25. The first ionisation enthalpy of Ga (579) is slightly higher than that of Al (577) because (a) Ga has fewer shells (b) the ten 3d electrons in Ga shield the nucleus poorly (c) Ga has a half-filled p subshell (d) Al is a non-metal
26. Element X has successive ionisation enthalpies of 520, 7298 and 11815 kJ mol⁻¹. X is (a) Be (b) B (c) Na (d) Li
27. The correct order of electron gain enthalpy (most negative first) is (a) F > Cl > Br > I (b) Cl > F > Br > I (c) I > Br > Cl > F (d) Cl > Br > F > I
28. In which pair is the first ionisation enthalpy of the first element greater than that of the second? (a) Mg, Al (b) Na, Mg (c) B, C (d) O, F
29. Assertion (A): The first ionisation enthalpy of boron is lower than that of beryllium. Reason (R): Boron has a higher nuclear charge than beryllium. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The electron gain enthalpy of fluorine is more negative than that of chlorine. Statement II: The electron gain enthalpy of sulfur is more negative than that of oxygen. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Energy must always be supplied to remove an electron. |
| 2 | a | Noble gases have complete shells. |
| 3 | b | Larger size and more shielding down a group. |
| 4 | d | Cs has the largest atom of the four. |
| 5 | b | Cl: −349 kJ mol⁻¹. |
| 6 | d | Electron must enter a new shell. |
| 7 | a | Removing from a positive ion is harder. |
| 8 | c | He: 2372 kJ mol⁻¹. |
| 9 | b | 1 eV per atom = 96.49 kJ mol⁻¹. |
| 10 | c | Electron added to a negative ion. |
| 11 | b | 801 < 899 < 1086 < 1402. |
| 12 | d | Paired 2p electrons repel in O. |
| 13 | c | Jump after the third electron. |
| 14 | a | 5.39 × 96.49 = 520. |
| 15 | c | 496 < 577 < 738. |
| 16 | b | Crowded 2p repels the incoming electron. |
| 17 | d | 0.2 mol × 349 = 69.8 kJ. |
| 18 | c | S: −200, the most negative in group 16. |
| 19 | a | Half-filled 2p³ resists an extra electron. |
| 20 | c | 496 − 349 = +147. |
| 21 | b | Half-filled 3p³ in P. |
| 22 | d | Easy electron loss = metal, reducing agent. |
| 23 | a | λ = hc/E = 91.2 nm. |
| 24 | c | 0.1 mol × 2189 = 218.9 kJ. |
| 25 | b | Poor 3d shielding raises Z_eff. |
| 26 | d | Jump after the first electron; IE₁ = 520 is Li. |
| 27 | b | Cl −349, F −328, Br −325, I −295. |
| 28 | a | Mg (3s) is harder to ionise than Al (3p). |
| 29 | b | R is true but would predict the opposite; the 2p vs 2s effect explains A. |
| 30 | d | F (−328) is less negative than Cl; S (−200) beats O (−141). |
Chapter 5 revision sheet
One-page summary
Ionisation enthalpy (IE) is the energy needed to remove the most loosely held electron from an isolated gaseous atom: X(g) → X⁺(g) + e⁻. It is always positive.
Successive IEs always increase: IE₁ < IE₂ < IE₃, because each electron leaves a more positive ion.
A very large jump appears when the next electron must come from a noble gas core; the jump tells you the number of valence electrons.
IE depends on nuclear charge, atomic size, shielding, penetration (s > p > d > f) and stability of half-filled or full subshells.
Across a period IE rises; down a group IE falls.
Exceptions: Be > B and Mg > Al (s electron is more penetrating than p); N > O and P > S (half-filled p³ is stable, O has a paired 2p electron).
Highest IE₁ of all elements: He (2372). Lowest among common elements: Cs.
Electron gain enthalpy (ΔegH) is the enthalpy change when a gaseous atom gains an electron: X(g) + e⁻ → X⁻(g).
ΔegH becomes more negative across a period and less negative down a group, with exceptions.
Cl (−349) is more negative than F (−328); S (−200) more negative than O (−141). The small 2p shell of F and O is crowded.
Noble gases have large positive ΔegH; the second electron gain (O⁻ → O²⁻) is always positive (about +780).
Energy for gaseous ion pair: ΔH = IE₁ of metal + ΔegH of non-metal (Na + Cl: 496 − 349 = +147).
Must-remember table
| Quantity | Values (kJ mol⁻¹) |
|---|---|
| IE₁ period 2: Li, Be, B, C, N, O, F, Ne | 520, 899, 801, 1086, 1402, 1314, 1681, 2080 |
| IE₁ period 3: Na, Mg, Al, Si, P, S, Cl, Ar | 496, 737, 577, 786, 1012, 999, 1256, 1520 |
| IE₁ group 1: Li, Na, K | 520, 496, 419 |
| IE₁ of H and He | 1312 and 2372 |
| Mg: IE₁, IE₂, IE₃ | 737, 1450, 7731 |
| Al: IE₁ to IE₄ | 577, 1817, 2745, 11577 |
| ΔegH halogens: F, Cl, Br, I | −328, −349, −325, −295 |
| ΔegH O, S | −141, −200 |
| ΔegH Ne; O⁻ → O²⁻ | +116; about +780 |
Memory aids
"BOAS" are the dips: B, O, Al, S each have a lower IE₁ than the element just before them (Be, N, Mg, P).
"Chlorine Champions Capture": Cl has the most negative electron gain enthalpy of all elements, beating F.
"Jump = Group": the position of the first big jump in successive IEs gives the number of valence electrons (jump after IE₂ means group 2).
"Second electron, second thoughts": adding a second electron to a negative ion always costs energy.
Concept connections
Shielding, penetration and stable half-filled configurations come from Chemistry Book 2: Atomic Structure.
IE and ΔegH combine with lattice enthalpy in Born–Haber cycles, covered in Chemistry Book 4: Chemical Thermodynamics.
Low IE explains why metals are good reducing agents, linking to Chemistry Book 7: Redox Reactions and Electrochemistry.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match the element in List I with its first ionisation enthalpy (kJ mol⁻¹) in List II.
List I:
A. Li
B. N
C. O
D. Ne
List II:
i. 1314
ii. 2080
iii. 520
iv. 1402
(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii
32. Match the element in List I with its electron gain enthalpy (kJ mol⁻¹) in List II.
List I:
A. F
B. Cl
C. O
D. Ne
List II:
i. −349
ii. +116
iii. −328
iv. −141
(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-i, C-ii, D-iv
33. Match each IE comparison in List I with its reason in List II.
List I:
A. IE₁ of Be > IE₁ of B
B. IE₁ of N > IE₁ of O
C. IE₁ of Mg > IE₁ of Al
D. IE₁ of He > IE₁ of H
List II:
i. O loses an electron from a doubly occupied 2p orbital
ii. The electron removed comes from 3p, shielded by 3s
iii. Same 1s shell but nuclear charge of 2
iv. The electron removed comes from 2p, shielded by 2s
(a) A-iv, B-ii, C-i, D-iii (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-i, C-ii, D-iii (d) A-iv, B-i, C-iii, D-ii
34. Match the process in List I with its enthalpy change in List II.
List I:
A. Na(g) → Na⁺(g) + e⁻
B. Cl(g) + e⁻ → Cl⁻(g)
C. O⁻(g) + e⁻ → O²⁻(g)
D. Ne(g) + e⁻ → Ne⁻(g)
List II:
i. −349 kJ mol⁻¹
ii. About +780 kJ mol⁻¹
iii. +496 kJ mol⁻¹
iv. +116 kJ mol⁻¹
(a) A-i, B-iii, C-ii, D-iv (b) A-iii, B-i, C-ii, D-iv (c) A-iii, B-ii, C-i, D-iv (d) A-iii, B-i, C-iv, D-ii
35. How many of the following statements are correct?
A. IE₂ of any element is greater than its IE₁.
B. Ionisation enthalpy generally decreases down a group.
C. Fluorine has the most negative electron gain enthalpy of all elements.
D. Adding an electron to O⁻(g) releases energy.
E. Noble gases have positive electron gain enthalpies.
(a) 3 (b) 2 (c) 4 (d) 5
36. Choose the correct set of statements.
A. IE₁ order: B < Be < C < O < N.
B. IE₁ order: Na < Al < Mg < Si.
C. S has a higher IE₁ than P.
D. IE₁ of K is lower than that of Na.
(a) A and C only (b) B, C and D only (c) A, B and D only (d) All four
37. How many of these processes release energy?
Cl(g) + e⁻ → Cl⁻(g)
O(g) + e⁻ → O⁻(g)
O⁻(g) + e⁻ → O²⁻(g)
Na(g) → Na⁺(g) + e⁻
F(g) + e⁻ → F⁻(g)
He(g) + e⁻ → He⁻(g)
(a) 2 (b) 4 (c) 5 (d) 3
38. For magnesium, IE₁ = 737, IE₂ = 1450 and IE₃ = 7731 kJ mol⁻¹. Choose the correct set of statements.
A. The big jump lies between IE₂ and IE₃.
B. Mg readily forms Mg²⁺ in its compounds.
C. IE₂ is roughly twice IE₁.
D. IE₃ removes an electron from the 3s subshell.
(a) A, B and C only (b) A and D only (c) B and D only (d) All four
39. Successive ionisation enthalpies of element X are given.
| IE₁ | IE₂ | IE₃ | IE₄ |
|---|---|---|---|
| 577 | 1817 | 2745 | 11577 |
(values in kJ mol⁻¹) X most likely belongs to
(a) group 1 (b) group 2 (c) group 13 (d) group 14
40. A graph of IE₁ (y-axis) against atomic number 1 to 20 (x-axis) has a saw-tooth shape. Which reading of the graph is correct?
(a) The highest points are noble gases and the lowest points are alkali metals (b) The highest points are alkali metals (c) Values rise steadily with no dips (d) The point for Ne lies below that for Na
41. Element Y has IE₁ = 496 and IE₂ = 4562 kJ mol⁻¹. The formula of its chloride is most likely
(a) YCl₂ (b) YCl₃ (c) Y₂Cl (d) YCl
Case for Q42–43: A student studies the formation of gaseous ions. She takes IE₁ of potassium as 419 kJ mol⁻¹ and ΔegH of bromine as −325 kJ mol⁻¹.
42. ΔH for K(g) + Br(g) → K⁺(g) + Br⁻(g) is
(a) −94 kJ mol⁻¹ (b) +744 kJ mol⁻¹ (c) +94 kJ mol⁻¹ (d) −744 kJ mol⁻¹
43. The energy released when 0.50 mol of gaseous Br atoms gain electrons is
(a) 325 kJ (b) 162.5 kJ (c) 650 kJ (d) 81.3 kJ
44. Which of these has the highest second ionisation enthalpy?
(a) Na (b) Mg (c) Al (d) Si
45. Which order of the magnitude of electron gain enthalpy is correct?
(a) F > Cl > O > S (b) Cl > F > O > S (c) F > Cl > S > O (d) Cl > F > S > O
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Li 520, N 1402, O 1314, Ne 2080 |
| 32 | a | F −328, Cl −349, O −141, Ne +116 |
| 33 | c | 2p vs 2s shielding; paired 2p in O; 3p in Al; He has Z = 2 |
| 34 | b | IE₁ of Na 496; ΔegH of Cl −349; O⁻ repels the electron; Ne has a full shell |
| 35 | a | A, B, E are correct; Cl is most negative; O⁻ → O²⁻ needs energy |
| 36 | c | B 801 < Be 899 < C 1086 < O 1314 < N 1402; Na 496 < Al 577 < Mg 737 < Si 786; P 1012 > S 999 |
| 37 | d | Cl, O and F electron gains are exothermic; the other three need energy |
| 38 | a | 7731/1450 is about 5.3; IE₃ removes a 2p electron from the neon core |
| 39 | c | Ratios 3.1, 1.5, 4.2: the big jump after IE₃ means 3 valence electrons (Al) |
| 40 | a | He, Ne, Ar at peaks; Li, Na, K at troughs |
| 41 | d | IE₂/IE₁ is about 9.2, so one valence electron; Y is Na, chloride YCl |
| 42 | c | 419 + (−325) = +94 kJ mol⁻¹ |
| 43 | b | 0.50 × 325 = 162.5 kJ |
| 44 | a | Na⁺ has a neon core, so its IE₂ (4562) is far above the others |
| 45 | d | Cl 349 > F 328 > S 200 > O 141 |