Chapter 2: Motion Graphs
What you will learn
How to read position–time (x–t), velocity–time (v–t) and acceleration–time (a–t) graphs
What the slope and the area of each graph mean
How to find distance and displacement from a v–t graph, including when velocity turns negative
How to sketch one graph from another
How to spot graphs that cannot happen in nature
Graph questions are among the most common in NEET kinematics. The whole chapter comes down to one table:
| Graph | Slope gives | Area under it gives |
|---|---|---|
| x–t | velocity | nothing useful |
| v–t | acceleration | displacement (signed area); distance = total unsigned area |
| a–t | rate of change of acceleration (rarely asked) | change in velocity |
2.1 Position–time graphs
On an x–t graph, the slope at any point is the velocity at that instant:
where θ is the angle the tangent makes with the time axis (when both axes use the same scale).

Read the steepness, not the height: a steeper curve means a faster body.
Reading the shapes:
Horizontal line: x does not change. The body is at rest.
Straight inclined line: constant slope, so constant velocity (uniform motion). A steeper line means a faster body.
Line sloping down: negative velocity. The body moves towards the origin (or in the − direction).
Curve bending upward (slope increasing): velocity increasing, positive acceleration.
Curve bending downward (slope decreasing): velocity decreasing.
Two lines crossing: the two bodies are at the same place at that moment, so they meet.
Graphs that cannot happen:
A vertical segment on an x–t graph would mean infinite velocity.
A curve that gives two positions at the same time would mean the body is in two places at once.
A curve that goes back in time is impossible.
On a distance–time graph, the curve can never go down, because distance never decreases.
Worked example 2.1: The x–t graphs of two cars are straight lines making angles of 30° and 60° with the time axis. Find the ratio of their speeds.
Solution: v₁/v₂ = tan 30°/tan 60° = (1/√3)/√3 = 1/3.
2.2 Velocity–time graphs
Slope = acceleration. A straight v–t line means constant acceleration. A horizontal line means zero acceleration (constant velocity).
Area = displacement. Over a short time dt, the body moves v dt. Adding these strips gives the area under the curve:
Area above the time axis counts as positive displacement. Area below counts as negative.
Displacement = (area above) − (area below).
Distance = (area above) + (area below).

Each shaded region is the distance covered in that stage; their slopes give the accelerations.
Worked example 2.2: A car starts from rest, speeds up uniformly to 20 m/s in 4 s, moves at 20 m/s for 6 s, then slows uniformly to rest in 5 s. Find the total distance and the average speed.
Solution: The v–t graph is a trapezium.
Speeding up: ½ × 4 × 20 = 40 m
Steady: 6 × 20 = 120 m
Slowing: ½ × 5 × 20 = 50 m
Total = 210 m in 15 s, so the average speed = 14 m/s. The accelerations are 20/4 = 5 m/s² and −20/5 = −4 m/s².
Shortcut: area of a trapezium = ½ × (sum of parallel sides) × height = ½ × (15 + 6) × 20 = 210 m.
Worked example 2.3: Velocity changes sign. v changes uniformly from +10 m/s to −10 m/s in 4 s. Find the displacement and the distance.
Solution: v = 0 at t = 2 s. Area above = ½ × 2 × 10 = 10 m. Area below = 10 m.
Displacement = 10 − 10 = 0. Distance = 10 + 10 = 20 m.
Worked example 2.4: v = 10 − 2t (SI). Find the distance and displacement in the first 6 s.
Solution: v = 0 at t = 5 s. From 0 to 5 s: area = ½ × 5 × 10 = 25 m. From 5 to 6 s: v goes from 0 to −2 m/s, area = ½ × 1 × 2 = 1 m (below the axis).
Distance = 26 m. Displacement = 25 − 1 = 24 m.
2.3 Acceleration–time graphs
The area under an a–t graph is the change in velocity:
Worked example 2.5: A body starts from rest. Its acceleration is 2 m/s² for 3 s, then −1 m/s² for the next 2 s. Find its velocity at t = 5 s.
Solution: Δv = (2 × 3) + (−1 × 2) = 6 − 2 = 4 m/s. Since u = 0, v = 4 m/s.
Worked example 2.6: a = 2t, starting from rest. Find v at t = 3 s.
Solution: The a–t graph is a straight line through the origin. Area = ½ × 3 × 6 = 9, so v = 9 m/s.
2.4 Sketching one graph from another
| Motion | a–t | v–t | x–t |
|---|---|---|---|
| At rest | zero line | zero line | horizontal line |
| Uniform velocity | zero line | horizontal line | straight inclined line |
| Uniform acceleration from rest | horizontal line above axis | straight line through origin | parabola opening up (x ∝ t²) |
| Uniform retardation to rest | horizontal line below axis | straight line falling to zero | curve that flattens out |
Ball thrown straight up and caught at the same point (taking up as positive):
a–t: a horizontal line at −g throughout. Acceleration is −g even at the top.
v–t: a straight line from +u down through zero (at the top) to −u. Slope = −g.
x–t: an inverted parabola, highest at the instant v = 0.
speed–t: a V shape. Speed falls to zero at the top, then rises.

All three graphs share the same instant for the top of the flight, marked where velocity crosses zero.
Ball dropped and bouncing elastically: v grows linearly downward, then jumps suddenly from −v to +v at the bounce. In real life the bounce takes a short time, so the jump is steep, not perfectly vertical.
Quick revision
x–t slope = velocity. v–t slope = acceleration.
v–t area = displacement (signed); add unsigned areas for distance.
a–t area = change in velocity.
Uniform acceleration: v–t straight, x–t parabola.
Thrown-up ball: v–t straight line through zero at the top; a = −g all the way.
No vertical x–t lines, no double values, no going back in time.
NEET traps
Treating the area below the time axis as positive when asked for displacement.
Reading velocity off an x–t graph as the height of the curve instead of its slope.
Thinking acceleration is zero at the top of a vertical throw. Only velocity is zero there.
Using tan θ for slopes when the axes have different scales. Then compute the slope from the values instead.
Practice MCQs: Chapter 2
Level 1: Concept check
1. The slope of a position–time graph gives: (a) acceleration (b) velocity (c) displacement (d) distance
2. The slope of a velocity–time graph gives: (a) acceleration (b) velocity (c) displacement (d) jerk
3. The area under a velocity–time graph gives: (a) acceleration (b) velocity (c) displacement (d) force
4. The area under an acceleration–time graph gives: (a) displacement (b) change in velocity (c) distance (d) speed
5. An x–t graph parallel to the time axis shows that the body is: (a) moving uniformly (b) accelerating (c) at rest (d) decelerating
6. A straight inclined x–t graph shows: (a) uniform acceleration (b) uniform velocity (c) rest (d) variable velocity
7. A v–t graph parallel to the time axis shows: (a) zero velocity (b) zero acceleration (c) uniform acceleration (d) zero displacement
8. Which x–t graph is impossible? (a) a horizontal line (b) a vertical line (c) a parabola (d) a line sloping down
9. A straight v–t line with positive slope that does not pass through the origin shows: (a) uniform velocity (b) uniform acceleration with some initial velocity (c) uniform acceleration from rest (d) rest
10. An x–t curve whose slope keeps increasing shows a body that is: (a) at rest (b) moving uniformly (c) speeding up (d) slowing down
Level 2: NEET standard
11. The x–t graphs of two bodies make angles of 30° and 60° with the time axis. The ratio of their velocities is: (a) 1 : 2 (b) 1 : √3 (c) 1 : 3 (d) √3 : 1
12. A car speeds up from rest to 20 m/s in 4 s, moves steadily for 6 s, then stops uniformly in 5 s. The total distance is: (a) 180 m (b) 200 m (c) 210 m (d) 300 m
13. For Q12, the average speed is: (a) 10 m/s (b) 12 m/s (c) 14 m/s (d) 20 m/s
14. Velocity changes uniformly from +10 m/s to −10 m/s in 4 s. The displacement is: (a) 20 m (b) 10 m (c) zero (d) 40 m
15. For Q14, the distance is: (a) 20 m (b) 10 m (c) zero (d) 40 m
16. From rest, a = 2 m/s² for 3 s, then −1 m/s² for 2 s. The final velocity is: (a) 8 m/s (b) 6 m/s (c) 4 m/s (d) 2 m/s
17. For a ball thrown up and caught at the same point, the v–t graph (up positive) is: (a) a V shape (b) a straight line with negative slope crossing the time axis (c) a parabola (d) a horizontal line
18. For the same ball, the speed–time graph is: (a) a V shape (b) a straight line (c) a parabola (d) a horizontal line
19. A v–t graph is a triangle with peak 30 m/s at t = 6 s, ending at t = 10 s. The distance is: (a) 90 m (b) 150 m (c) 180 m (d) 300 m
20. For Q19, the retardation in the last part is: (a) 5 m/s² (b) 6 m/s² (c) 7.5 m/s² (d) 3 m/s²
21. For uniform acceleration from rest, the x–t graph is: (a) a straight line (b) a parabola (c) a hyperbola (d) horizontal
22. For v = 10 − 2t, the distance in the first 6 s is: (a) 24 m (b) 25 m (c) 26 m (d) 36 m
Level 3: Challenge
23. For Q22, the displacement in the first 6 s is: (a) 24 m (b) 25 m (c) 26 m (d) 36 m
24. A body starts from rest with a = 2t. Its velocity at t = 3 s is: (a) 6 m/s (b) 9 m/s (c) 12 m/s (d) 18 m/s
25. On the v–t graph of a ball that bounces elastically, the moment of impact shows: (a) a sudden jump from −v to +v (b) a gradual curve through zero (c) a horizontal segment (d) no change
26. The x–t lines of two cars intersect at t = 5 s. This means that at t = 5 s: (a) they have the same velocity (b) they are at the same position (c) both are at rest (d) they have equal acceleration
27. On a v–t graph, the area above the axis is 30 m and below is 10 m. The distance and displacement are: (a) 40 m, 20 m (b) 20 m, 40 m (c) 40 m, 40 m (d) 30 m, 10 m
28. A v–t graph is a horizontal line at −5 m/s from t = 0 to t = 4 s. The displacement is: (a) 20 m (b) −20 m (c) zero (d) −5 m
29. Assertion (A): Average velocity between two instants is the slope of the chord on the x–t graph. Reason (R): Instantaneous velocity is the slope of the tangent on the x–t graph. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: An x–t graph can never be a vertical line. Statement II: For a real body, a v–t graph can never be a perfectly vertical line. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | dx/dt. |
| 2 | a | dv/dt. |
| 3 | c | ∫v dt. |
| 4 | b | ∫a dt. |
| 5 | c | Position fixed. |
| 6 | b | Constant slope. |
| 7 | b | Constant v. |
| 8 | b | Infinite velocity. |
| 9 | b | Constant slope, non-zero start. |
| 10 | c | Velocity increasing. |
| 11 | c | tan 30° : tan 60° = 1 : 3. |
| 12 | c | 40 + 120 + 50. |
| 13 | c | 210/15. |
| 14 | c | Equal areas above and below. |
| 15 | a | 10 + 10. |
| 16 | c | 6 − 2. |
| 17 | b | v = u − gt. |
| 18 | a | Speed falls to zero, then rises. |
| 19 | b | ½ × 10 × 30. |
| 20 | c | 30/4. |
| 21 | b | x = ½at². |
| 22 | c | 25 + 1. |
| 23 | a | 25 − 1. |
| 24 | b | Triangle area ½ × 3 × 6. |
| 25 | a | Direction reverses almost instantly. |
| 26 | b | Same x at the same t. |
| 27 | a | Sum for distance, difference for displacement. |
| 28 | b | −5 × 4. |
| 29 | b | Both true; R is about a different quantity. |
| 30 | a | Both would need infinite velocity or acceleration. |
Chapter 2 revision sheet
One-page summary
Slope of an x–t graph = velocity; steeper line = faster body; negative slope = moving backward.
A straight x–t line means uniform velocity; a curved one means acceleration.
x–t curve bending upward (slope rising) = positive acceleration; bending downward = negative acceleration.
Slope of a v–t graph = acceleration; a horizontal v–t line means a = 0.
Area under a v–t graph = displacement; area below the t-axis counts as negative.
Distance = total area with every part taken as positive.
Area under an a–t graph = change in velocity, not the velocity itself.
Where a v–t line crosses the t-axis, the body is momentarily at rest and turns back.
An x–t graph can never be vertical (infinite speed) or double back in time.
An x–t graph cannot have a sharp corner in real motion (velocity cannot jump); a v–t graph can, in idealised problems.
Ball thrown up (up positive): x–t is a downward parabola, v–t a straight line of slope −g, a–t a horizontal line at −g.
Area of a trapezium on a v–t graph = ½ × (sum of parallel sides) × width.
Intersection of two x–t lines = the bodies meet (same position), not same velocity.
Must-remember table
| Graph | Slope gives | Area gives | Horizontal line means |
|---|---|---|---|
| x–t | Velocity (m/s) | Nothing useful | At rest |
| v–t | Acceleration (m/s²) | Displacement (m) | Uniform velocity |
| a–t | Rate of change of a (m/s³) | Change in velocity (m/s) | Constant acceleration |
| Speed–t | Rate of change of speed | Distance (m) | Constant speed |
| v²–x (straight line) | 2a | Not used | v constant |
Memory aids
"SAD" for v–t: Slope = Acceleration, area = Displacement.
"Smile speeds up": an x–t curve shaped like a smile (bending up) has positive acceleration; a frown bends down.
"Below the line is a backward step": v–t area under the axis is negative displacement.
"Cross = Meet": two x–t graphs crossing means the bodies meet at that time.
Concept connections
Graph slopes are derivatives and areas are integrals, from Chapter 1 and the calculus note in Physics Book 1: Physics and Measurement.
Force–time graph area (impulse) in Physics Book 3: Laws of Motion uses the same area idea.
Force–displacement area = work in Physics Book 4: Work, Energy and Power.
Practice MCQs: Chapter 2, Level 4 (new NEET pattern)
31. Match each graph feature with what it gives.
List I:
A. Slope of an x–t graph
B. Slope of a v–t graph
C. Area under a v–t graph
D. Area under an a–t graph
List II:
(i) Change in velocity
(ii) Acceleration
(iii) Displacement
(iv) Velocity
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-iii, B-ii, C-iv, D-i
32. Match each x–t graph shape with the motion.
List I:
A. Horizontal straight line
B. Straight line sloping upward
C. Curve whose slope keeps increasing
D. Curve whose slope decreases and becomes zero
List II:
(i) Slowing down and coming to rest
(ii) At rest
(iii) Speeding up
(iv) Constant velocity
(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iii, C-iv, D-i (d) A-ii, B-iv, C-iii, D-i
33. Match each v–t graph with a situation (take up as positive for vertical motion).
List I:
A. Horizontal line above the t-axis
B. Straight line from the origin with positive slope
C. Straight line starting at positive v with negative slope, crossing the t-axis
D. Straight line from the origin with negative slope
List II:
(i) Ball dropped from rest
(ii) Ball thrown straight up
(iii) Car starting from rest with constant acceleration
(iv) Car on cruise control
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-ii, C-iii, D-i
34. A v–t graph rises in a straight line from 0 to 10 m/s during 0–5 s, stays at 10 m/s during 5–15 s, and falls in a straight line to 0 at 20 s. Match.
List I:
A. Acceleration during 0–5 s
B. Acceleration during 15–20 s
C. Displacement during 0–20 s
D. Average velocity during 0–20 s
List II:
(i) 150 m
(ii) 2 m/s²
(iii) 7.5 m/s
(iv) −2 m/s²
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-i, C-iv, D-iii
35. How many of the following statements are correct?
A. An x–t graph can never be a vertical line.
B. In idealised problems a v–t graph may have a sharp corner.
C. Area under a speed–time graph gives distance.
D. If the x–t lines of two bodies cross, the bodies have equal velocities at that instant.
E. An x–t graph cannot turn back in time.
(a) 2 (b) 3 (c) 4 (d) 5
36. A v–t graph is a straight line from +20 m/s at t = 0 to −20 m/s at t = 4 s. Choose the correct set.
A. Acceleration is −10 m/s².
B. The body turns back at t = 2 s.
C. Displacement in 0–4 s is zero.
D. Distance covered in 0–4 s is 80 m.
(a) A and C only (b) A, B and C only (c) B and D only (d) A, B, C and D
37. An a–t graph is a horizontal line at 3 m/s² from t = 0 to t = 4 s. The body's velocity at t = 0 is 2 m/s. Choose the correct set.
A. Velocity at t = 4 s is 14 m/s.
B. The v–t graph is a straight line of slope 3 m/s².
C. The x–t graph is a straight line.
D. Displacement in 0–4 s is 32 m.
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D
38. A ball is thrown straight up and caught at the same point. Take up as positive. How many statements are correct?
A. Its v–t graph is a straight line with negative slope.
B. Its a–t graph is a horizontal line below the t-axis.
C. Its height–time graph is a straight line.
D. Its speed–time graph is V-shaped, touching zero at the top.
E. At the highest point both velocity and acceleration are zero.
(a) 1 (b) 2 (c) 3 (d) 4
Graph for Q39–Q40: A v–t graph rises in a straight line from 0 at t = 0 to 12 m/s at t = 4 s, then falls in a straight line to 0 at t = 10 s.
39. The ratio of the magnitude of acceleration to that of retardation is: (a) 2 : 3 (b) 3 : 2 (c) 1 : 1 (d) 2 : 1
40. The average speed over 0–10 s is: (a) 6 m/s (b) 12 m/s (c) 3 m/s (d) 7.2 m/s
41. A body starts from rest. Its acceleration is given in the table.
| Interval (s) | 0–3 | 3–5 | 5–7 |
|---|---|---|---|
| a (m/s²) | 2 | 0 | −3 |
Its displacement from t = 0 to t = 7 s is: (a) 36 m (b) 21 m (c) 30 m (d) 27 m
Case for Q42–Q43: A metro train leaves a station from rest. It speeds up uniformly at 1 m/s² for 20 s, runs at constant speed for 60 s, and then slows uniformly to rest at the next station in 10 s.
42. The distance between the two stations is: (a) 1200 m (b) 1400 m (c) 1500 m (d) 1800 m
43. The magnitude of its retardation while stopping is: (a) 1 m/s² (b) 0.5 m/s² (c) 4 m/s² (d) 2 m/s²
44. A v–t graph is a straight line from −6 m/s at t = 0 to +6 m/s at t = 6 s. The distance covered in 0–6 s is: (a) 0 (b) 18 m (c) 36 m (d) 9 m
45. A graph of v² (m²/s²) against x (m) for a body is a straight line with intercept 16 on the v² axis and slope 4. Its velocity 3 s after passing x = 0 is: (a) 10 m/s (b) 16 m/s (c) 7 m/s (d) 12 m/s
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | x–t slope = v, v–t slope = a, v–t area = displacement, a–t area = Δv |
| 32 | d | Flat = rest, straight = constant v, rising slope = speeding up, flattening = stopping |
| 33 | a | Cruise = flat, from rest = rising line, thrown up = falling line crossing axis, dropped = negative line from origin |
| 34 | c | 10/5 = 2; −10/5 = −2; 25 + 100 + 25 = 150 m; 150/20 = 7.5 m/s |
| 35 | c | A, B, C, E true; crossing x–t lines means same position |
| 36 | b | Slope −40/4 = −10; v = 0 at 2 s; areas +20 and −20; distance 40 m |
| 37 | a | v = 2 + 3(4) = 14; slope 3; x–t is a parabola; 8 + 24 = 32 m |
| 38 | c | A, B, D true; height–time is a parabola; a = −g at the top |
| 39 | b | 12/4 = 3 and 12/6 = 2 |
| 40 | a | Area = ½ × 10 × 12 = 60 m in 10 s |
| 41 | d | v reaches 6 m/s; 9 + 12 + (12 − 6) = 27 m |
| 42 | c | v_max = 20 m/s; 200 + 1200 + 100 = 1500 m |
| 43 | d | 20 m/s lost in 10 s |
| 44 | b | Two triangles of area ½ × 3 × 6 = 9 m each |
| 45 | a | v² = u² + 2ax gives u = 4 m/s, a = 2 m/s²; v = 4 + 2(3) = 10 m/s |