Chapter 9 of 11 · 18 min read

Chapter 7: Circular Motion

What you will learn

  • Angular displacement, angular velocity, time period and frequency

  • Why a body moving at constant speed in a circle is accelerating

  • A full derivation of centripetal acceleration

  • Tangential acceleration and total acceleration in non-uniform circular motion

  • Equations for constant angular acceleration

This chapter covers the kinematics of circular motion. The forces that cause it (centripetal force, banking of roads) come in the Laws of Motion book.

7.1 Angular variables

A particle moves on a circle of radius r centred at O.

Angular displacement (θ) is the angle swept by the radius. In radians:

θ=sr\theta = \frac{s}{r}

where s is the arc length. One full turn = 2π rad = 360°.

Angular velocity (ω) is the rate of change of angular displacement:

ω=dθdt(rad/s)\omega = \frac{d\theta}{dt} \quad (\text{rad/s})

Link with linear speed. Differentiate s = rθ (r is constant):

v=rωv = r\omega

Points farther from the centre move faster, even though every point on a rotating disc has the same ω.

Time period (T) is the time for one revolution. Frequency (f) is revolutions per second (Hz).

ω=2πT=2πf\omega = \frac{2\pi}{T} = 2\pi f

If a speed is given in rpm (revolutions per minute), ω = 2π × rpm/60.

Angular velocity as a vector. Its direction is along the axis of rotation, given by the right-hand rule: curl your fingers along the motion; your thumb points along ω. Then v = ω × r.

Worked example 7.1: Clock hands. Find the angular speeds of the second, minute and hour hands.

Solution:

  • Second hand: T = 60 s → ω = 2π/60 = π/30 rad/s.

  • Minute hand: T = 3600 s → ω = π/1800 rad/s.

  • Hour hand: T = 12 h = 43 200 s → ω = π/21 600 rad/s.

The minute hand turns 12 times faster than the hour hand.

7.2 Uniform circular motion

In uniform circular motion (UCM), the speed is constant. But the direction of the velocity keeps changing, so the velocity changes, and the body accelerates.

Figure 7.1 · Velocity and acceleration in uniform and non-uniform circular motion
Figure 7.1 · Velocity and acceleration in uniform and non-uniform circular motion

In uniform motion v and a are at right angles. When the speed rises, a tangential part adds on and the total acceleration leans forward.

Deriving the centripetal acceleration. Let the body move from P to Q in a short time Δt, with the radius turning through a small angle Δθ.

  1. The velocities at P and Q both have magnitude v, and the angle between them is also Δθ (each is perpendicular to its radius).

  2. Drawing v_P and v_Q from one point, they form a thin isosceles triangle. The third side is Δv.

  3. For a small angle, |Δv| = v Δθ (arc ≈ chord).

  4. So the magnitude of acceleration is:

a=∣Δv⃗∣Δt=vΔθΔt=vωa = \frac{|\Delta \vec{v}|}{\Delta t} = v\frac{\Delta\theta}{\Delta t} = v\omega
  1. Using v = rω:

ac=vω=v2r=ω2ra_c = v\omega = \frac{v^2}{r} = \omega^2 r
  1. As Δθ → 0, Δv becomes perpendicular to v, pointing towards the centre. Hence the name centripetal (centre-seeking) acceleration.

In vector form, with r measured from the centre: a_c = −ω²r.

Key facts about UCM:

  • Speed, angular speed, time period and the magnitude of acceleration are constant.

  • Velocity and acceleration change direction all the time, so UCM is not uniformly accelerated motion.

  • v is along the tangent; a_c points to the centre; the angle between them is 90°.

  • A force perpendicular to the motion does no work, so the speed and kinetic energy stay the same.

Worked example 7.2: A stone tied to a 0.5 m string is whirled at 2 revolutions per second. Find its speed and acceleration.

Solution: ω = 2π × 2 = 4π rad/s. v = ωr = 2π ≈ 6.28 m/s. a = ω²r = 16π² × 0.5 = 8π² ≈ 79 m/s², towards the centre.

Worked example 7.3: Velocity changes over part of a circle. A particle moves at constant speed v on a circle of radius r. Find (a) the change in velocity after a quarter turn and a half turn, (b) the average velocity over a half turn.

Solution:

(a) Quarter turn: velocities at 90°, so |Δv| = √2 v. Half turn: velocity reverses, so |Δv| = 2v.

(b) Displacement = 2r; time = πr/v. Average velocity = 2r/(πr/v) = 2v/π.

7.3 Non-uniform circular motion

If the speed also changes, the body has two accelerations at once.

Tangential acceleration changes the speed. It acts along the tangent:

at=dvdt=rαa_t = \frac{dv}{dt} = r\alpha

where α = dω/dt is the angular acceleration (rad/s²).

Centripetal acceleration changes the direction. It still equals v²/r, but now v (and so a_c) changes with time.

The two are perpendicular, so the total acceleration is:

a=ac2+at2,tan⁡ϕ=ataca = \sqrt{a_c^2 + a_t^2}, \qquad \tan\phi = \frac{a_t}{a_c}

where φ is the angle between the total acceleration and the radius. The angle between a and v is no longer 90°: it is less than 90° when speeding up and more than 90° when slowing down.

Worked example 7.4: A car on a circular track of radius 100 m has speed 20 m/s, increasing at 3 m/s². Find its total acceleration.

Solution: a_c = 400/100 = 4 m/s², a_t = 3 m/s². a = √(16 + 9) = 5 m/s².

Worked example 7.5: A particle moves on a circle of radius 2 m, with path length s = t³ (SI). Find its total acceleration at t = 1 s.

Solution: v = ds/dt = 3t² = 3 m/s. a_t = dv/dt = 6t = 6 m/s². a_c = v²/r = 9/2 = 4.5 m/s². a = √(36 + 20.25) = 7.5 m/s².

7.4 Equations for constant angular acceleration

These match the straight-line equations, with θ for s, ω for v and α for a:

LinearAngular
v = u + atω = ω₀ + αt
s = ut + ½at²θ = ω₀t + ½αt²
v² = u² + 2asω² = ω₀² + 2αθ
s = r θ, v = r ω, a_t = r αlink between them

Worked example 7.6: A fan starts from rest and reaches 600 rpm in 10 s at constant angular acceleration. Find α and the number of revolutions made.

Solution: ω = 600 × 2π/60 = 20π rad/s. α = 20π/10 = 2π rad/s². θ = ½ × 2π × 100 = 100π rad = 50 revolutions.

Worked example 7.7: Clock hands meeting. After 12:00, when do the hour and minute hands next coincide?

Solution: Relative angular speed = π/1800 − π/21 600 = 11π/21 600 rad/s. Time for a relative turn of 2π = 2π × 21 600/(11π) ≈ 3927 s = 12/11 h ≈ 1 h 5.5 min.

Quick revision

  • θ = s/r; ω = dθ/dt = 2π/T = 2πf; v = rω.

  • a_c = v²/r = ω²r = vω, towards the centre.

  • UCM: constant speed, changing velocity; v ⊥ a.

  • Non-uniform: a_t = dv/dt = rα; a = √(a_c² + a_t²).

  • Half turn: Δv = 2v, average velocity = 2v/π. Quarter turn: Δv = √2 v.

  • Angular equations mirror the linear ones.

NEET traps

  • Calling UCM "uniformly accelerated". The acceleration's direction changes.

  • Forgetting to convert rpm to rad/s (multiply by 2π/60).

  • Using a_c = v²/r but forgetting the tangential part when speed is changing.

  • Taking the hour hand's period as 24 h. It is 12 h.

Practice MCQs: Chapter 7

Level 1: Concept check

1. In uniform circular motion, which stays constant? (a) velocity (b) speed (c) acceleration vector (d) displacement

2. The centripetal acceleration points: (a) along the tangent (b) towards the centre (c) away from the centre (d) along the axis

3. The centripetal acceleration equals: (a) v/r (b) v²/r (c) vr (d) v²r

4. The relation between linear and angular speed is: (a) v = ω/r (b) v = rω (c) v = ω²r (d) v = r/ω

5. In UCM, the angle between velocity and acceleration is: (a) 0° (b) 45° (c) 90° (d) 180°

6. The SI unit of angular velocity is: (a) rad/s (b) rad/s² (c) m/s (d) rev

7. The work done by the centripetal force in one revolution is: (a) positive (b) negative (c) zero (d) 2πr F

8. The angular speed of the second hand of a clock is: (a) π/30 rad/s (b) π/60 rad/s (c) 2π rad/s (d) π/1800 rad/s

9. Uniform circular motion is: (a) uniform velocity motion (b) uniformly accelerated motion (c) accelerated motion with changing direction of acceleration (d) motion with zero acceleration

10. Angular frequency and frequency are related by: (a) ω = f/2π (b) ω = 2πf (c) ω = 2π/f (d) ω = f

Level 2: NEET standard

11. A stone on a 0.5 m string makes 2 rev/s. Its acceleration is about: (a) 8 m/s² (b) 39 m/s² (c) 79 m/s² (d) 158 m/s²

12. For Q11, its speed is: (a) π m/s (b) 2π m/s (c) 4π m/s (d) 0.5 m/s

13. A car on a 100 m radius track at 20 m/s speeds up at 3 m/s². Its total acceleration is: (a) 3 m/s² (b) 4 m/s² (c) 5 m/s² (d) 7 m/s²

14. A fan reaches 600 rpm from rest in 10 s. Its angular acceleration is: (a) π rad/s² (b) 2π rad/s² (c) 6 rad/s² (d) 60 rad/s²

15. For Q14, the number of revolutions in the 10 s is: (a) 25 (b) 50 (c) 100 (d) 300

16. The ratio of the angular speeds of the minute hand and hour hand is: (a) 1 : 12 (b) 12 : 1 (c) 60 : 1 (d) 1 : 60

17. For a half revolution at constant speed v, the average velocity is: (a) v (b) zero (c) 2v/π (d) πv/2

18. For a half revolution, the magnitude of the change in velocity is: (a) zero (b) v (c) √2 v (d) 2v

19. For a quarter revolution, the magnitude of the change in velocity is: (a) zero (b) v (c) √2 v (d) 2v

20. The Earth's angular speed about its axis is about: (a) 7.3 × 10⁻⁵ rad/s (b) 7.3 × 10⁻³ rad/s (c) 1.2 × 10⁻⁵ rad/s (d) 2π rad/s

21. If the speed is doubled and the radius halved, the centripetal acceleration becomes: (a) 2 times (b) 4 times (c) 8 times (d) the same

22. A particle moves in a circle of radius 2 m with period π s. Its centripetal acceleration is: (a) 2 m/s² (b) 4 m/s² (c) 8 m/s² (d) 16 m/s²

Level 3: Challenge

23. When a_c = a_t, the angle between the total acceleration and the velocity is: (a) 0° (b) 45° (c) 90° (d) 135°

24. A particle moves on a circle of radius 2 m with s = t³. Its total acceleration at t = 1 s is: (a) 4.5 m/s² (b) 6 m/s² (c) 7.5 m/s² (d) 10.5 m/s²

25. A particle moves on a circle of radius 8 m with s = t². Its tangential and centripetal accelerations become equal at: (a) 1 s (b) 2 s (c) 4 s (d) 8 s

26. The position of a particle is r = cos ωt î + sin ωt ĵ. Its acceleration is: (a) ωr (b) −ωr (c) −ω²r (d) zero

27. After 12:00, the hour and minute hands next coincide after about: (a) 60 min (b) 65.5 min (c) 72 min (d) 55 min

28. A particle starts from rest on a circle of radius 10 m with tangential acceleration 2 m/s². After 5 s, its centripetal acceleration is: (a) 2 m/s² (b) 5 m/s² (c) 10 m/s² (d) 20 m/s²

29. Assertion (A): Uniform circular motion is accelerated motion. Reason (R): The direction of velocity changes continuously. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In UCM, the angular velocity is constant. Statement II: In UCM, the linear velocity is constant. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bOnly the magnitude stays fixed.
2bCentre-seeking.
3bSection 7.2.
4bDifferentiate s = rθ.
5cTangent ⊥ radius.
6aRadian per second.
7cForce ⊥ displacement.
8a2π/60.
9cConstant magnitude, changing direction.
10bOne turn = 2π rad.
11c8π².
12b4π × 0.5.
13c√(4² + 3²).
14b20π/10.
15b100π rad / 2π.
16b12 h vs 1 h period.
17c2r ÷ (πr/v).
18dVelocity reverses.
19cPerpendicular vectors.
20a2π/86 400 s.
21c(2v)²/(r/2) = 8v²/r.
22cv = 4 m/s; 16/2.
23bEqual perpendicular parts.
24cWorked example 7.5.
25ba_t = 2, a_c = 4t²/8 → t = 2.
26cDifferentiate twice.
27bWorked example 7.7.
28cv = 10 m/s; 100/10.
29aChanging direction means changing velocity.
30cVelocity direction changes.

Chapter 7 revision sheet

One-page summary

  • Angular displacement θ = s/r (radian); angular velocity ω = dθ/dt (rad/s).

  • v = rω; in vector form v = ω × r, with ω along the axis by the right-hand rule.

  • ω = 2π/T = 2πf; convert rpm to rad/s by multiplying by 2π/60.

  • Uniform circular motion (UCM): constant speed, changing velocity, so it is accelerated motion.

  • Centripetal acceleration a_c = v²/r = ω²r = vω, always towards the centre.

  • In vector form a_c = −ω²r (opposite to the position vector from the centre).

  • In UCM, v and a_c are perpendicular, so the centripetal force does no work.

  • Non-uniform motion adds tangential acceleration a_t = dv/dt = rα.

  • Total acceleration a = √(a_t² + a_c²), at angle tan φ = a_c/a_t to the velocity.

  • Rotational equations (constant α): ω = ω₀ + αt, θ = ω₀t + ½αt², ω² = ω₀² + 2αθ.

  • Revolutions = θ/2π.

  • On a rotating rigid body every point has the same ω, but v and a_c grow with r.

  • Change in velocity over angle Δθ at constant speed = 2v sin(Δθ/2).

Must-remember table

QuantityFormulaSI unit
Angular velocityω = dθ/dt = 2π/T = 2πfrad/s
Linear speedv = rωm/s
Centripetal accelerationv²/r = ω²rm/s²
Tangential accelerationdv/dt = rαm/s²
Total acceleration√(a_t² + a_c²)m/s²
Angular accelerationα = dω/dtrad/s²
Hand angular speedssecond π/30, minute π/1800, hour π/21600rad/s

Memory aids

  • "Centre-seeking, Constant-speed, Changing-velocity" (CCC): the three facts of UCM.

  • "VR-W" (v = rω): Velocity = Radius × ω (W for omega).

  • "rpm × π/30": 2π/60 = π/30, so 300 rpm = 10π rad/s at a glance.

  • "Tangent Tunes speed, Centre Turns direction": a_t changes speed, a_c changes direction.

Concept connections

  • The force behind a_c (centripetal force, banking of roads) is in Physics Book 3: Laws of Motion.

  • Rotational kinematics extends to torque and moment of inertia in Physics Book 5: Rotational Motion.

  • Orbits of satellites use a_c = v²/r with gravity as the centripetal force in Physics Book 6: Gravitation.

Practice MCQs: Chapter 7, Level 4 (new NEET pattern)

31. A ceiling-fan blade tip at radius 0.5 m turns at a steady 120 rpm. Match.

List I:

  • A. Angular velocity

  • B. Time period

  • C. Linear speed of the tip

  • D. Centripetal acceleration of the tip

List II:

  • (i) 8π² m/s²

  • (ii) 0.5 s

  • (iii) 4π rad/s

  • (iv) 2π m/s

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-ii, C-i, D-iv

32. Match each rotating body with its angular speed (in rad/s).

List I:

  • A. Second hand of a clock

  • B. Minute hand of a clock

  • C. Hour hand of a clock

  • D. Earth spinning on its axis (take one day = 24 h)

List II:

  • (i) π/1800

  • (ii) π/43200

  • (iii) π/30

  • (iv) π/21600

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-i, C-ii, D-iv

33. For a particle in uniform circular motion, match each quantity with how it behaves.

List I:

  • A. Speed

  • B. Velocity

  • C. Acceleration

  • D. Angular velocity vector

List II:

  • (i) A fixed vector along the axis

  • (ii) Always directed towards the centre

  • (iii) Same magnitude, direction keeps changing along the tangent

  • (iv) A constant scalar

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-iii, C-ii, D-iv

34. A particle moves on a circle of radius 2 m. At one instant its speed is 4 m/s and its speed is increasing at 6 m/s². Match.

List I:

  • A. Centripetal acceleration

  • B. Tangential acceleration

  • C. Magnitude of total acceleration

  • D. Angular acceleration

List II:

  • (i) 10 m/s²

  • (ii) 3 rad/s²

  • (iii) 8 m/s²

  • (iv) 6 m/s²

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-i, D-ii

35. How many of the following statements are correct?

  • A. Uniform circular motion is accelerated motion.

  • B. In uniform circular motion, velocity and acceleration are perpendicular.

  • C. Average velocity over one full revolution is zero.

  • D. In non-uniform circular motion, the total acceleration points exactly towards the centre.

  • E. Centripetal acceleration is a constant vector in uniform circular motion.

(a) 4 (b) 2 (c) 3 (d) 5

36. A particle moves on a circle of radius R at constant speed v. Choose the correct set.

  • A. In half a revolution, its displacement has magnitude 2R.

  • B. In half a revolution, its average velocity has magnitude 2v/π.

  • C. In half a revolution, its velocity changes by 2v in magnitude.

  • D. In a quarter revolution, its velocity changes by 2v in magnitude.

(a) A and B only (b) A and C only (c) A, B, C and D (d) A, B and C only

37. A ceiling fan starts from rest and speeds up uniformly to 300 rpm in 10 s. How many statements are correct?

  • A. Its final angular velocity is 10π rad/s.

  • B. Its angular acceleration is π rad/s².

  • C. It makes 25 revolutions in these 10 s.

  • D. Its average angular velocity over these 10 s is 5π rad/s.

  • E. It makes 50 revolutions in these 10 s.

(a) 3 (b) 4 (c) 5 (d) 2

38. Choose the correct set of equations for rotation with constant angular acceleration α.

  • A. ω = ω₀ + αt

  • B. θ = ω₀t + ½αt²

  • C. ω² = ω₀² + 2αθ

  • D. v = ω/r

(a) A, B and C only (b) A and B only (c) C and D only (d) A, B, C and D

39. For points on a disc turning at constant ω, a graph of centripetal acceleration against distance from the axis is: (a) a rectangular hyperbola (b) a straight line through the origin (c) a parabola (d) a horizontal line

40. Three particles move in uniform circular motion:

ParticleRadius (m)Speed (m/s)
P12
Q24
R44

The ratio of their centripetal accelerations a_P : a_Q : a_R is: (a) 1 : 1 : 1 (b) 1 : 4 : 4 (c) 1 : 2 : 1 (d) 2 : 1 : 2

41. A wheel starts from rest with constant angular acceleration. Its angular position is recorded:

t (s)0123
θ (rad)02818

Its angular velocity at t = 3 s is: (a) 12 rad/s (b) 6 rad/s (c) 18 rad/s (d) 9 rad/s

Case for Q42–Q43: A car on a circular test track of radius 100 m speeds up uniformly from 10 m/s to 20 m/s in 5 s.

42. Its tangential acceleration is: (a) 4 m/s² (b) 1 m/s² (c) 3 m/s² (d) 2 m/s²

43. The magnitude of its total acceleration at the instant its speed is 20 m/s is: (a) 4 m/s² (b) 6 m/s² (c) 2√5 m/s² (d) 2 m/s²

44. A particle moves uniformly on a circle of radius 1 m with period 2 s. The magnitude of the change in its velocity over one-third of a period is: (a) π m/s (b) √3π m/s (c) 2π m/s (d) π/2 m/s

45. Particle A moves uniformly on a circle of radius 1 m with period 2 s. Particle B moves uniformly on a circle of radius 4 m with twice A's speed. The ratio a_A : a_B of their centripetal accelerations is: (a) 1 : 4 (b) 4 : 1 (c) 1 : 2 (d) 1 : 1

Level 4 answer key

QAnsReason
31aω = 120 × π/30 = 4π; T = 2π/ω = 0.5 s; v = 0.5 × 4π = 2π; a = 16π² × 0.5 = 8π²
32c2π divided by 60 s, 3600 s, 43200 s and 86400 s
33bSpeed constant; velocity turns; acceleration points to centre; ω fixed along axis
34d16/2 = 8; 6; √(64 + 36) = 10; 6/2 = 3
35cA, B, C true; total acceleration has a tangential part; a_c keeps turning
36dDiameter 2R in time πR/v; v reverses; quarter turn gives v√2
37bA, B, C, D true: ω = 10π, α = π, θ = 50π rad = 25 rev, average (0 + 10π)/2
38av = rω, not ω/r
39ba_c = ω²r with ω fixed
40cv²/r: 4, 8, 4
41aθ = 2t² gives α = 4 rad/s²; ω = 4 × 3 = 12 rad/s
42d(20 − 10)/5
43ca_c = 400/100 = 4; √(16 + 4) = 2√5
44bv = 2πr/T = π; turn of 120° gives 2v sin 60° = √3 v
45da_A = π²/1; v_B = 2π, a_B = 4π²/4 = π²
18 min left
‹
›