Chapter 2 of 10 · 5 min read

Exam Strategy

Kinetic theory usually gives 1–2 NEET questions on its own, and it often shares a question with thermodynamics, so it is a small unit with a high return per hour. Learn the five or six core formulas cold, then practise ratio questions until you can do them in under a minute.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1. Ideal gas equation and gas laws0–1MediumPV = nRT sits inside almost every numerical in the unit
2. Work done on compressing a gas0–1MediumOften asked through P–V graphs; overlaps with Thermodynamics
3. Kinetic theory and pressure0–1MediumP = ⅓ρv²_rms and E = (3/2)PV give quick one-step questions
4. Temperature and molecular speeds1Highrms speed ratios and the Maxwell curve are asked most often
5. Degrees of freedom and specific heats1Highγ, Cv, Cp and gas mixtures are favourite NEET numericals
6. Mean free path0–1MediumOne formula, but its proportionalities are easy marks

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • v_rms = √(3RT/M): ratio questions (change T, change M, two gases at the same T) and "at what temperature will gas X match gas Y".

  • Average KE = (3/2)k_BT: same for every gas at one temperature; asked as a statement or a one-line number.

  • v_rms : v_avg : v_mp = √3 : √(8/π) : √2: order of the three speeds and their ratios.

  • Maxwell distribution curve: how the peak shifts and flattens on heating, and that the area stays fixed.

  • Degrees of freedom: f = 3, 5, 6 (and 7 with vibration) for common molecules.

  • γ = 1 + 2/f, Cv = fR/2, Cp − Cv = R: single-gas values and mixtures of two gases.

  • Law of equipartition: ½k_BT per quadratic term; k_BT per vibrational mode.

  • P = ⅓ρv²_rms and PV = ⅔E: pressure from density and speed, and kinetic energy per unit volume = 3P/2.

  • Mean free path λ = k_BT/(√2πd²P): how λ changes with P, T, d and n.

  • Work on P–V graphs: area under a curve, loop area of a cycle, sign for clockwise vs anticlockwise.

  • Dalton's law and mixture molar mass: partial pressure from moles, M_mix = total mass/total moles.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalFind v_rms, γ of a mixture, λ at low pressureWrite the proportionality first; plug numbers only at the end
Conceptual"Which quantity is the same for H₂ and O₂ at 300 K?"Ask: does it depend on T only, or on T and M?
Statement-basedFour statements on the Maxwell curve or equipartitionMark each T/F separately before you look at the options
Match-the-columnMolecules with f or γ; processes with work formulasFix the one pair you are surest of, then cut options
Assertion–reasonA: v_rms of H₂ exceeds O₂. R: M is smallerCheck A and R alone, then check if R is the cause of A
Graph/diagram-basedMaxwell curves at two T; P–V cycles; λ vs 1/P linesRead the axes first; slope or area usually carries the answer

Study plan

DayWhat to studyPractice target
1Chapter 1: gas laws, PV = nRT, Dalton's lawLevels 1–2 of Chapter 1 (22 MCQs)
2Chapter 2: work in different processes, P–V areasChapter 2 Levels 1–3; redo every graph question
3Chapter 3: assumptions, pressure derivation, PV = ⅔EChapter 3 Levels 1–3 plus Level 4
4Chapter 4: temperature, three speeds, Maxwell curveChapter 4 all levels; write the speed ratios from memory
5Chapter 5: degrees of freedom, equipartition, Cv, Cp, γChapter 5 all levels; make your own f–γ table
6Chapter 6: mean free path and Brownian motion; Level 4 sets of Chapters 1–2Chapter 6 all levels plus two Level 4 sets
7Unit Test (50 min), then Mock Test 2 (35 min)Analyse every wrong answer; note the trap in one line

Last 48 hours:

  1. Day −2: read the six revision sheets and the Book-at-a-glance sheet; redo only the questions you got wrong.

  2. Day −1 morning: the 40 rapid-fire facts and the common mistakes checklist, twice.

  3. Day −1 evening: no new questions; write the ten key formulas from memory once and sleep early.

Time-saving tricks

  • Ratio, not value: v_rms ∝ √(T/M). To compare two gases, never use R; e.g. O₂ at 4800 K matches H₂ at 300 K because 4800/32 = 300/2.

  • Speed shortcuts: v_rms ≈ 1.22 v_mp and v_avg ≈ 1.13 v_mp. If an option breaks v_rms > v_avg > v_mp, cut it.

  • γ from f in one step: γ = 1 + 2/f gives 5/3, 7/5, 4/3, 9/7 for f = 3, 5, 6, 7. Any ideal-gas γ above 5/3 or at 1 or below is wrong.

  • Mixture γ: add Cv in units of R (n₁f₁/2 + n₂f₂/2), divide by total moles, then γ = 1 + R/Cv. Never average γ directly.

  • Mean free path checks: heating in a rigid sealed vessel does not change λ (n is fixed). At constant P, λ ∝ T.

  • P–V loop sign: clockwise loop = positive net work by the gas; anticlockwise = negative. The loop area is the size.

  • Kelvin first: convert every °C to K before any ratio. Options built from a °C ratio are always there to trap you.

  • E per volume: total translational KE per m³ is 1.5P. If P is in pascal, the answer is in J/m³ with no other data needed.

5 min left
‹
›