Chapter 4 of 10 · 25 min read

Chapter 2: Work Done on Compressing a Gas

What you will learn

  • How a moving piston does work on a gas, and why dW = P dV.

  • The sign convention for work done by and on a gas.

  • Work as the area under a P–V curve, and why it depends on the path.

  • Formulas for work in isobaric, isochoric, isothermal and adiabatic processes.

  • Net work in a cyclic process, and how to read it from the loop.

2.1 Work done by a piston

Take a gas in a cylinder closed by a light, frictionless piston of area A. The gas pushes on the piston with force F = PA.

Let the piston move out by a small distance dx. The gas does work on the piston.

dW=F dx=PA dx=P dVdW = F\,dx = PA\,dx = P\,dV

Here dV = A dx is the small change in volume. For a finite change from V₁ to V₂, add up all the small pieces.

Wby gas=∫V1V2P dVW_{\text{by gas}} = \int_{V_1}^{V_2} P\,dV

This needs the process to be quasi-static. That means the piston moves so slowly that the gas has one well-defined pressure at every instant.

2.2 Sign convention

In this book (and in NCERT) W means work done by the gas.

ProcessdVWork by gas WWork on gas (−W)
Expansionpositivepositivenegative
Compressionnegativenegativepositive
Constant volumezerozerozero

So when you compress a gas, you do positive work on it. The gas does an equal amount of negative work on you. In a NEET question, read the words carefully: "work done by the gas" and "work done on the gas" differ only in sign.

The first law (Book 8) is written as ΔQ = ΔU + W, with W done by the gas.

2.3 Work as area on a P–V diagram

The integral of P dV is the area under the P–V curve, between the curve and the V-axis.

  • Moving right (expansion): the area counts as positive work by the gas.

  • Moving left (compression): the area counts as negative work by the gas, that is, positive work on it.

Two different paths between the same end states enclose different areas. So work depends on the path, not just on the end states. Work is not a state function. Internal energy, which depends only on T for an ideal gas, is.

2.4 Work in standard processes

Isochoric (constant volume). dV = 0 throughout, so W = 0. A sealed pressure cooker heating on a stove does no P dV work.

Isobaric (constant pressure). P comes out of the integral.

W=P(V2−V1)=nR(T2−T1)W = P(V_2 - V_1) = nR(T_2 - T_1)

Isothermal (constant temperature). For an ideal gas, P = nRT/V with T fixed.

W=∫V1V2nRTV dV=nRTln⁡V2V1=2.303 nRTlog⁡10V2V1W = \int_{V_1}^{V_2} \frac{nRT}{V}\,dV = nRT\ln\frac{V_2}{V_1} = 2.303\,nRT\log_{10}\frac{V_2}{V_1}

Since P₁V₁ = P₂V₂, the ratio V₂/V₁ = P₁/P₂. So the work done on the gas in an isothermal compression is:

Won=nRTln⁡V1V2=nRTln⁡P2P1W_{\text{on}} = nRT\ln\frac{V_1}{V_2} = nRT\ln\frac{P_2}{P_1}

In an isothermal compression of an ideal gas, U does not change. So all the work done on the gas leaves it as heat. The cylinder must be in good contact with its surroundings for this to happen.

Adiabatic (no heat exchange). Here PV^γ = K, a constant, where γ = Cp/Cv.

W=∫V1V2KVγ dV=K1−γ[V21−γ−V11−γ]=P1V1−P2V2γ−1=nR(T1−T2)γ−1W = \int_{V_1}^{V_2} \frac{K}{V^{\gamma}}\,dV = \frac{K}{1-\gamma}\left[V_2^{1-\gamma} - V_1^{1-\gamma}\right] = \frac{P_1V_1 - P_2V_2}{\gamma - 1} = \frac{nR(T_1 - T_2)}{\gamma - 1}

In an adiabatic compression, no heat leaves. So all the work done on the gas raises its internal energy, and the gas heats up. Pump up a bicycle tyre quickly and feel the hot barrel of the pump. A diesel engine uses the same effect to ignite fuel without a spark plug.

The adiabatic temperature rise follows from TV^(γ−1) = constant.

T2=T1(V1V2)γ−1T_2 = T_1\left(\frac{V_1}{V_2}\right)^{\gamma - 1}
ProcessConditionWork done by gas W
IsochoricV constant0
IsobaricP constantP(V₂ − V₁) = nRΔT
IsothermalT constantnRT ln(V₂/V₁)
AdiabaticQ = 0(P₁V₁ − P₂V₂)/(γ − 1)
Free expansion into vacuumno opposing pressure0

2.5 Which compression needs the most work?

Start from the same state and compress to the same final volume by three routes.

Figure 2.1 · Compression from the same start to the same volume by three routes
Figure 2.1 · Compression from the same start to the same volume by three routes

The adiabatic curve rises fastest, so the area under it, the work done on the gas, is largest; the isobaric line encloses the least area.

The adiabatic curve is steeper than the isothermal one (slope −γP/V against −P/V). As you compress adiabatically, the gas heats up, so its pressure climbs faster. The area under it is larger.

So, for the same compression from the same start, work done on the gas is in the order: adiabatic > isothermal > isobaric.

For expansion to the same final volume, the order flips for work done by the gas. The isothermal curve stays higher than the adiabatic one, so isothermal expansion gives more work than adiabatic expansion.

2.6 Cyclic processes

In a cycle, the gas returns to its starting state. On a P–V diagram, the path is a closed loop.

  • The net work equals the area enclosed by the loop.

  • Clockwise loop: net work done by the gas is positive (as in an engine).

  • Anticlockwise loop: net work is done on the gas (as in a refrigerator).

Since U returns to its start value, ΔU = 0 over a cycle. So net heat absorbed equals net work done by the gas.

Worked examples

Worked example 2.1: A gas at a steady 2.0 × 10⁵ Pa is compressed from 5.0 L to 3.0 L. Find the work done on the gas.

Solution: W_on = P(V₁ − V₂) = 2.0 × 10⁵ × (5.0 − 3.0) × 10⁻³ = 400 J.

Worked example 2.2: Two moles of an ideal gas are heated at constant pressure from 300 K to 350 K. Find the work done by the gas.

Solution: W = nRΔT = 2 × 8.314 × 50 ≈ 831 J. We did not need the pressure itself.

Worked example 2.3: One mole of an ideal gas at 300 K is compressed isothermally from 10 L to 5 L. Find the work done on it.

Solution: W_on = RT ln(V₁/V₂) = 8.314 × 300 × ln 2 = 8.314 × 300 × 0.693 ≈ 1.73 × 10³ J.

Worked example 2.4: Two moles of gas at 27 °C are compressed isothermally from 1 atm to 10 atm. Find the work done on the gas.

Solution: W_on = nRT ln(P₂/P₁) = 2 × 8.314 × 300 × 2.303 × log 10 ≈ 1.15 × 10⁴ J, about 11.5 kJ.

Worked example 2.5: One mole of a monatomic ideal gas (γ = 5/3) is compressed adiabatically. Its temperature rises from 300 K to 400 K. Find the work done on it.

Solution: W_on = nR(T₂ − T₁)/(γ − 1) = 8.314 × 100/(2/3) ≈ 1.25 × 10³ J. This equals the rise in internal energy, (3/2)RΔT.

Worked example 2.6: A cyclic process on a P–V diagram is a rectangle. Pressure runs between 1.0 × 10⁵ Pa and 3.0 × 10⁵ Pa. Volume runs between 1.0 L and 4.0 L. The loop is traced clockwise. Find the net work done by the gas.

Solution: Area = ΔP × ΔV = 2.0 × 10⁵ × 3.0 × 10⁻³ = 600 J. Clockwise, so 600 J is done by the gas. If traced anticlockwise, 600 J would be done on the gas.

Worked example 2.7: A gas goes along a straight line on the P–V diagram from (3.0 L, 1.0 × 10⁵ Pa) to (1.0 L, 3.0 × 10⁵ Pa). Find the work done on the gas.

Solution: The area under the line is a trapezium. W = ½ (1.0 + 3.0) × 10⁵ × 2.0 × 10⁻³ = 400 J. Volume decreases, so 400 J of work is done on the gas.

Worked example 2.8: In a diesel engine, air (γ = 1.4) at 300 K is compressed adiabatically to 1/16 of its volume. Find the final temperature and the work done on one mole.

Solution: T₂ = 300 × 16^0.4 ≈ 300 × 3.03 ≈ 909 K (about 636 °C), hot enough to ignite diesel. W_on = R(T₂ − T₁)/(γ − 1) = 8.314 × 609/0.4 ≈ 1.27 × 10⁴ J.

Worked example 2.9 (NEET-hard): n moles of a monatomic gas at temperature T are compressed to half their volume. Compare the work needed (i) isothermally and (ii) adiabatically.

Solution: (i) W_iso = nRT ln 2 ≈ 0.693 nRT. (ii) T₂ = T × 2^(2/3) ≈ 1.587T. W_adi = nR(T₂ − T)/(γ − 1) = 1.5 nR × 0.587T ≈ 0.881 nRT. The adiabatic route needs about 27% more work, as the steeper curve suggests.

Quick revision

  • W (by gas) = ∫ P dV = area under the P–V curve.

  • Compression: work by gas negative, work on gas positive.

  • Isobaric: W = PΔV = nRΔT. Isochoric: W = 0.

  • Isothermal: W = nRT ln(V₂/V₁) = nRT ln(P₁/P₂).

  • Adiabatic: W = (P₁V₁ − P₂V₂)/(γ − 1) = nR(T₁ − T₂)/(γ − 1).

  • Same compression, same start: W_on adiabatic > isothermal > isobaric.

  • Cycle: net work = loop area; clockwise means work by gas.

  • Work depends on path; ΔU of an ideal gas depends only on ΔT.

NEET traps

  • Mixing up "work done by the gas" and "work done on the gas". The answer to one is minus the other.

  • Using litres directly with pascals. 1 L = 10⁻³ m³, and 1 L atm ≈ 101.3 J.

  • Writing ln(V₁/V₂) for work done by the gas in an expansion. It gives a negative number; the order is final over initial.

  • Forgetting that free expansion into a vacuum does zero work, even though the volume changes.

  • Taking the isothermal curve as steeper than the adiabatic one. The adiabatic is steeper by a factor γ.

  • Using the trapezium area with the P-axis instead of the V-axis.

Practice MCQs: Chapter 2

Level 1: Concept check

1. When a gas at pressure P expands by a small volume dV, the work done by it is (a) V dP (b) −P dV (c) P dV (d) PV

2. The work done by a gas in an isochoric process is (a) zero (b) PV (c) nRT (d) nRT ln 2

3. On a P–V diagram, the work done by a gas in a process equals (a) the slope of the curve (b) the area between the curve and the P-axis (c) the product of final P and V (d) the area between the curve and the V-axis

4. In a cyclic process, the net work done by the gas equals (a) zero always (b) the area enclosed by the loop (c) the change in internal energy (d) the heat rejected

5. The work done by n moles of an ideal gas in an isothermal expansion from V₁ to V₂ is (a) nRT ln(V₂/V₁) (b) nRT ln(V₁/V₂) (c) nR(V₂ − V₁) (d) nRT(V₂ − V₁)

6. When a gas is compressed, the work done by the gas is (a) positive (b) zero (c) negative (d) positive or negative depending on temperature

7. For n moles of an ideal gas heated at constant pressure through ΔT, the work done by the gas is (a) nR/ΔT (b) nRΔT (c) zero (d) nC_vΔT

8. A P–V loop is traced anticlockwise. Over one cycle, (a) the gas does positive net work (b) no net work is done (c) internal energy rises (d) net work is done on the gas

9. The product of pressure and volume has the dimensions of (a) energy (b) power (c) force (d) momentum

10. A gas is compressed from the same initial state to the same final volume by three routes. The work done on it is largest for (a) isobaric (b) isothermal (c) adiabatic (d) all equal

Level 2: NEET standard

11. A gas at a steady 1.5 × 10⁵ Pa is compressed from 3 L to 1 L. The work done on it is (a) 150 J (b) 300 J (c) 450 J (d) 3 × 10⁵ J

12. Half a mole of an ideal gas is heated at constant pressure through 40 K. The work done by it is about (a) 332 J (b) 83 J (c) 20 J (d) 166 J

13. One mole of an ideal gas at 300 K is compressed isothermally to 1/e of its volume. The work done on it is about (a) 2.49 kJ (b) 1.73 kJ (c) 0.92 kJ (d) 6.78 kJ

14. Two moles of an ideal gas at 400 K expand isothermally from 2 L to 8 L. The work done by the gas is about (a) 4.6 kJ (b) 6.6 kJ (c) 9.2 kJ (d) 13.3 kJ

15. Two moles of a diatomic gas (γ = 1.4) are compressed adiabatically. The temperature rises from 300 K to 360 K. The work done on it is about (a) 998 J (b) 2.49 kJ (c) 1.25 kJ (d) 3.49 kJ

16. A cycle is a rectangle on the P–V diagram with P between 2 × 10⁵ Pa and 5 × 10⁵ Pa and V between 2 L and 6 L. The magnitude of net work per cycle is (a) 1200 J (b) 3000 J (c) 600 J (d) 2000 J

17. An ideal gas is compressed slowly at constant temperature. Which is correct? (a) Its internal energy rises by the work done on it (b) It absorbs heat equal to the work done on it (c) No heat flows (d) It gives out heat equal to the work done on it

18. A gas expands along a straight line on the P–V diagram from (1 L, 2 × 10⁵ Pa) to (3 L, 4 × 10⁵ Pa). The work done by it is (a) 400 J (b) 800 J (c) 600 J (d) 1200 J

19. One mole of an ideal gas at 300 K is compressed isothermally from 1 atm to 2 atm. The work done on it is about (a) 2.49 kJ (b) 1.73 kJ (c) 0.87 kJ (d) 3.46 kJ

20. A monatomic gas is compressed adiabatically. PV changes from 300 J to 500 J. The work done on the gas is (a) 300 J (b) 200 J (c) 133 J (d) 500 J

21. A gas expands freely into a vacuum inside an insulated box. The work done by the gas is (a) PΔV (b) nRT ln 2 (c) negative (d) zero

22. The barrel of a bicycle pump gets warm when a tyre is pumped quickly. The main reason is that (a) friction alone heats the barrel (b) the air expands and cools the surroundings (c) quick compression is nearly adiabatic, so work done on the air raises its internal energy (d) the tyre rubber releases heat

Level 3: Challenge

23. From the same initial state, an ideal gas is compressed to the same final volume once isothermally and once adiabatically. Compared with the isothermal case, the adiabatic case has (a) a lower final pressure and less work on the gas (b) a higher final pressure and more work on the gas (c) a higher final pressure and less work on the gas (d) the same final pressure and the same work

24. A gas expands so that P = aV, where a is a constant, from volume V to 2V. The work done by it is (a) 3aV²/2 (b) aV²/2 (c) 2aV² (d) 3aV²

25. One mole of an ideal gas at T₀ and V₀ first doubles its volume at constant pressure. It is then compressed isothermally back to V₀. The net work done on the gas is (a) RT₀ (b) RT₀ ln 2 (c) (1 − ln 2)RT₀ (d) (2 ln 2 − 1)RT₀

26. In a diesel engine, air (γ = 1.4) at 300 K is compressed adiabatically to 1/16 of its volume. Its final temperature is about (a) 600 K (b) 909 K (c) 4800 K (d) 1200 K

27. One mole of an ideal gas at 27 °C is compressed isothermally to one-tenth of its volume. The work done on it is about (a) 2.5 kJ (b) 1.7 kJ (c) 5.7 kJ (d) 24.9 kJ

28. An ideal gas goes from state A to state B by two different paths on a P–V diagram. Which must be the same for both paths? (a) Change in internal energy (b) Work done by the gas (c) Heat absorbed (d) Area under the path

29. Assertion (A): In an isothermal compression of an ideal gas, all the work done on the gas leaves it as heat. Reason (R): The internal energy of an ideal gas depends only on its temperature. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: From the same start, isothermal compression to a given volume needs more work than adiabatic compression to that volume. Statement II: Through any point on a P–V diagram, the adiabatic curve is steeper than the isothermal curve. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cdW = F dx = PA dx = P dV.
2aNo volume change, so no P dV work.
3d∫P dV is area down to the V-axis.
4bNet work equals the loop area.
5aIntegrate nRT/V from V₁ to V₂.
6cdV is negative, so P dV is negative.
7bPΔV = nRΔT at constant P.
8dAnticlockwise loop means work done on the gas.
9aPa × m³ = N m = J.
10cAdiabatic curve is steepest, so largest area.
11b1.5 × 10⁵ × 2 × 10⁻³ = 300 J.
12d0.5 × 8.314 × 40 ≈ 166 J.
13aRT ln e = 8.314 × 300 ≈ 2.49 kJ.
14c2 × 8.314 × 400 × ln 4 ≈ 9.2 kJ.
15bnRΔT/(γ − 1) = 2 × 8.314 × 60/0.4 ≈ 2.49 kJ.
16a3 × 10⁵ × 4 × 10⁻³ = 1200 J.
17dΔU = 0, so heat out equals work in.
18cTrapezium: ½(2 + 4) × 10⁵ × 2 × 10⁻³ = 600 J.
19bRT ln 2 ≈ 8.314 × 300 × 0.693 ≈ 1.73 kJ.
20a(500 − 300)/(5/3 − 1) = 300 J.
21dNo opposing pressure, so no work.
22cFast compression traps the work as internal energy.
23bSteeper adiabatic: higher P, larger area.
24a∫aV dV from V to 2V = a(4V² − V²)/2.
25dBy gas: RT₀ − 2RT₀ ln 2; on gas is the negative.
26b300 × 16^0.4 ≈ 909 K.
27cRT ln 10 = 8.314 × 300 × 2.303 ≈ 5.7 kJ.
28aU is a state function; W and Q depend on path.
29aΔU = 0 at fixed T, so Q out = W in.
30dAdiabatic is steeper, so it needs more work; I is false.

Chapter 2 revision sheet

One-page summary

  • Work done by a gas when its volume changes: W = ∫ P dV, the area under the P–V curve.

  • Sign used in this book: work by the gas is positive in expansion and negative in compression; work on the gas is the negative of this.

  • Isochoric (constant V): W = 0.

  • Isobaric (constant P): W = P(V₂ − V₁) = nR(T₂ − T₁).

  • Isothermal (constant T): W = nRT ln(V₂/V₁) = nRT ln(P₁/P₂); ΔU = 0 for an ideal gas.

  • Adiabatic (no heat exchange): PV^γ = constant and TV^(γ−1) = constant.

  • Adiabatic work: W = (P₁V₁ − P₂V₂)/(γ − 1) = nR(T₁ − T₂)/(γ − 1).

  • Through the same point, an adiabatic curve is γ times steeper than an isothermal curve.

  • Compressing from the same start to the same final volume: work on the gas is largest for adiabatic, then isothermal, then isobaric.

  • Adiabatic compression heats the gas; adiabatic expansion cools it.

  • Work depends on the path; ΔU of an ideal gas depends only on ΔT.

  • Cycle: ΔU = 0 and net work = area of the loop. Clockwise loop = positive net work by the gas.

Must-remember table

ProcessWork by gasCurve on P–V
Isochoric0Vertical line
IsobaricPΔV = nRΔTHorizontal line
IsothermalnRT ln(V₂/V₁)Hyperbola, PV = constant
AdiabaticnR(T₁ − T₂)/(γ − 1)Steeper curve, PV^γ = constant
CyclicLoop area (sign from direction)Closed loop
Unit check1 L atm = 101.3 J1 L = 10⁻³ m³

Memory aids

  • "VIP Is Zero": Vertical line, Isochoric Process, work is Zero.

  • "A-I-B" for compression work: Adiabatic > Isothermal > isoBaric (same start, same final volume).

  • "Clockwise = Cash out": a clockwise P–V loop means the gas pays out work (positive work by the gas).

  • "Log for Iso-T": only the isothermal formula carries a ln term.

Concept connections

  • These work formulas feed the first law, heat engines and efficiency in Physics Book 8: Thermodynamics.

  • "Work = area under a graph" is the same idea as in Physics Book 4: Work, Energy and Power.

  • Reversible isothermal work, nRT ln(V₂/V₁), returns in Chemistry Book 4: Chemical Thermodynamics.

Practice MCQs: Chapter 2, Level 4 (new NEET pattern)

31. Match the process (List I) with the work done by n moles of ideal gas (List II).

  • List I: A. Isochoric; B. Isobaric; C. Isothermal; D. Adiabatic

  • List II: (i) nRT ln(V₂/V₁); (ii) nR(T₁ − T₂)/(γ − 1); (iii) zero; (iv) nRΔT

(a) A-iii, B-i, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i

32. Match the process (List I) with its graph on a P–V diagram (List II).

  • List I: A. Isochoric; B. Isobaric; C. Isothermal; D. Adiabatic

  • List II: (i) horizontal line; (ii) PV^γ = constant curve, steeper than the isothermal; (iii) vertical line; (iv) rectangular hyperbola

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iv, B-i, C-iii, D-ii (d) A-iii, B-i, C-iv, D-ii

33. Two moles of an ideal gas are heated at constant pressure from 300 K to 350 K (R = 8.314 J mol⁻¹ K⁻¹). Match List I with List II.

  • List I: A. Work done by the gas; B. ΔU if the gas is monatomic; C. Heat supplied if the gas is monatomic; D. Heat supplied if the gas is rigid diatomic

  • List II: (i) 2078.5 J; (ii) 831.4 J; (iii) 2909.9 J; (iv) 1247.1 J

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-iii, D-i

34. Match List I with List II.

  • List I: A. 1 L atm of work; B. Net work in a rectangular P–V loop with ΔP = 2 × 10⁵ Pa and ΔV = 3 × 10⁻³ m³; C. Work by 1 mol of ideal gas doubling its volume isothermally at 300 K; D. Work by a gas expanding by 2 L against a constant 1 × 10⁵ Pa

  • List II: (i) 200 J; (ii) 1729 J; (iii) 101.3 J; (iv) 600 J

(a) A-iii, B-ii, C-iv, D-i (b) A-i, B-iv, C-ii, D-iii (c) A-iii, B-iv, C-ii, D-i (d) A-iv, B-iii, C-ii, D-i

35. How many of the following statements are correct?

  • A. The work done by a gas depends on the path between two states.

  • B. The area under a P–V curve equals the work done by the gas.

  • C. In an isothermal expansion of an ideal gas, the internal energy does not change.

  • D. In an adiabatic expansion, the temperature of the gas rises.

(a) Three (b) Two (c) Four (d) One

36. A gas is compressed from the same initial state to the same final volume by three separate paths: adiabatic, isothermal and isobaric. Choose the correct set of statements.

  • A. The work done on the gas is greater in the adiabatic path than in the isothermal path.

  • B. The final pressure is higher in the adiabatic path than in the isothermal path.

  • C. The final temperature is higher in the isothermal path than in the adiabatic path.

  • D. The isobaric path needs the least work on the gas.

(a) A and B only (b) B, C and D only (c) A, B and D only (d) A, C and D only

37. An ideal gas goes round a closed cycle on a P–V diagram. Choose the correct set of statements.

  • A. The net change in internal energy is zero.

  • B. The size of the net work equals the area enclosed by the loop.

  • C. An anticlockwise loop means positive net work done by the gas.

  • D. The net work is zero because the gas returns to its starting state.

(a) A, B and D only (b) B and C only (c) A and D only (d) A and B only

38. Choose the correct set of statements about an adiabatic process of an ideal gas.

  • A. PV^γ stays constant.

  • B. TV^(γ−1) stays constant.

  • C. At a point on the P–V diagram, the adiabatic curve is γ times as steep as the isothermal curve.

  • D. The work done equals nRT ln(V₂/V₁).

(a) A and B only (b) A, B and C only (c) A, C and D only (d) All four

39. A gas goes round a rectangular cycle on a P–V diagram: A (1 × 10⁵ Pa, 1 L) → B (1 × 10⁵ Pa, 4 L) → C (3 × 10⁵ Pa, 4 L) → D (3 × 10⁵ Pa, 1 L) → A. The net work done by the gas in one cycle is: (a) +600 J (b) +900 J (c) −600 J (d) zero

40. The table lists four processes of a gas.

ProcessTypePressureVolume change
IIsobaric2 × 10⁵ Pa2 L to 5 L
IIIsochoric1 × 10⁵ to 5 × 10⁵ Pastays 3 L
IIIIsobaric3 × 10⁵ Pa4 L to 6 L
IVIsobaric1.5 × 10⁵ Pa1 L to 6 L

The correct order of the work done by the gas is: (a) IV > I = III > II (b) II > IV > I > III (c) I > III > IV > II (d) IV > III > I > II

41. On a P–V diagram a gas expands along a straight line from (1 × 10⁵ Pa, 2 L) to (3 × 10⁵ Pa, 6 L). The work done by the gas is: (a) 400 J (b) 1200 J (c) 1600 J (d) 800 J

Passage for Q42–43: One mole of an ideal diatomic gas (γ = 1.4) is in a cylinder at 300 K with a volume of 10 L. In trial 1, the cylinder sits in a large water bath and the gas is compressed slowly to 5 L. In trial 2, the cylinder is wrapped in thick insulation and the gas is compressed from the same start to 5 L. Take R = 8.314 J mol⁻¹ K⁻¹, ln 2 = 0.693 and 2^0.4 = 1.32.

42. The work done on the gas in trial 1 is about: (a) 1729 J (b) 2494 J (c) 831 J (d) zero

43. The final temperature of the gas in trial 2 is about: (a) 300 K (b) 600 K (c) 396 K (d) 227 K

44. n moles of an ideal gas at temperature T expand isothermally from V to 3V. The gas is then compressed at constant pressure back to V, and finally heated at constant volume to its first state. The net work done by the gas in the cycle is about: (a) 1.10 nRT (b) 0.43 nRT (c) 0.67 nRT (d) zero

45. Two moles of a monatomic ideal gas (γ = 5/3) expand adiabatically. The temperature falls from 400 K to 250 K. The work done by the gas is about (R = 8.314 J mol⁻¹ K⁻¹): (a) 2494 J (b) 1663 J (c) 6236 J (d) 3741 J

Level 4 answer key

QAnsReason
31bIsochoric 0; isobaric nRΔT; isothermal log form; adiabatic nRΔT/(γ − 1)
32dVertical, horizontal, hyperbola, steeper adiabatic curve
33anRΔT = 831.4 J; (3/2)nRΔT = 1247.1 J; (5/2) = 2078.5 J; (7/2) = 2909.9 J
34c101.3 J; 2 × 10⁵ × 3 × 10⁻³ = 600 J; RT ln 2 = 1729 J; 10⁵ × 2 × 10⁻³ = 200 J
35aA, B, C true; adiabatic expansion cools the gas
36cAdiabatic compression ends hotter, so C is false
37dAnticlockwise gives negative work by gas; net work is the loop area, not zero
38bThe log formula is for isothermal work only
39cThe loop runs anticlockwise; area = 2 × 10⁵ × 3 × 10⁻³ = 600 J, so −600 J
40aI = 600 J, II = 0, III = 600 J, IV = 750 J
41dTrapezium area = ½(1 + 3) × 10⁵ × 4 × 10⁻³ = 800 J
42aW_on = RT ln 2 = 8.314 × 300 × 0.693 = 1729 J
43cT₂ = 300 × 2^0.4 = 396 K
44bnRT ln 3 − (P/3)(2V) = nRT(1.099 − 0.667) = 0.43 nRT
45dW = nRΔT/(γ − 1) = 2 × 8.314 × 150/(2/3) = 3741 J
25 min left
‹
›