Chapter 5 of 10 · 25 min read

Chapter 3: Kinetic Theory and Pressure

What you will learn

  • The assumptions of the kinetic theory of an ideal gas, and why each one is made.

  • How one molecule bouncing off a wall exerts a force.

  • The full derivation of P = ⅓ ρv²_rms, step by step.

  • The link between pressure and kinetic energy per unit volume.

  • How kinetic theory explains Boyle's law and Dalton's law.

3.1 Assumptions of kinetic theory

Kinetic theory builds a simple model of a gas and then tests it against experiments. The model of an ideal gas rests on these assumptions.

  1. A gas is made of a very large number of identical molecules. For one gas, all molecules have the same mass.

  2. The molecules are tiny points. Their total volume is negligible compared with the volume of the container.

  3. The molecules move randomly in all directions with a range of speeds. No direction is preferred.

  4. There are no forces between molecules except during collisions. So between collisions each molecule moves in a straight line at constant speed.

  5. Collisions between molecules, and with the walls, are perfectly elastic. Kinetic energy and momentum are both conserved.

  6. A collision lasts a negligible time compared with the time between collisions.

  7. The effect of gravity on the molecules is negligible.

  8. Newton's laws of motion apply to each molecule.

Assumptions 2 and 4 fail when the gas is squeezed hard or cooled a lot. That is why real gases stop being ideal at high pressure and low temperature (Chapter 1).

3.2 One molecule hitting one wall

Put N molecules, each of mass m, in a cube of side l. Fix x, y, z axes along the edges. Look at one molecule with velocity components vₓ, v_y, v_z.

Figure 3.1 · A molecule striking one face of the cube
Figure 3.1 · A molecule striking one face of the cube

Only the x-component of velocity reverses at the right face, so each hit delivers 2mvₓ and the next hit on that face comes after a round trip of 2l.

The molecule hits the right-hand face (perpendicular to x). The collision is elastic and the wall is fixed. So vₓ reverses to −vₓ, while v_y and v_z do not change.

Δpmolecule=(−mvx)−(mvx)=−2mvx\Delta p_{\text{molecule}} = (-m v_x) - (m v_x) = -2 m v_x

By Newton's third law, the wall receives momentum +2mvₓ.

After bouncing, the molecule travels to the opposite face and back. It covers 2l along x before it hits the same face again. The time between hits is:

Δt=2lvx\Delta t = \frac{2l}{v_x}

So the average force this one molecule puts on the face is the momentum delivered per unit time.

F1=2mvx2l/vx=mvx2lF_1 = \frac{2 m v_x}{2l / v_x} = \frac{m v_x^2}{l}

It does not matter if the molecule hits the side faces on the way. Those hits change v_y or v_z, never vₓ.

3.3 From one molecule to the whole gas

Add up the forces from all N molecules on the same face.

F=ml(vx12+vx22+⋯+vxN2)=mNl vx2‾F = \frac{m}{l}\left(v_{x1}^2 + v_{x2}^2 + \dots + v_{xN}^2\right) = \frac{mN}{l}\,\overline{v_x^2}

Here the bar means the average over all molecules. Pressure is force per unit area, and the face has area l². Also l³ = V.

P=Fl2=mNl3 vx2‾=mNV vx2‾P = \frac{F}{l^2} = \frac{mN}{l^3}\,\overline{v_x^2} = \frac{mN}{V}\,\overline{v_x^2}

Now use assumption 3. For every molecule, v² = vₓ² + v_y² + v_z². Motion is random, so no direction is special, and the three averages are equal.

v2‾=vx2‾+vy2‾+vz2‾=3 vx2‾⇒vx2‾=13v2‾\overline{v^2} = \overline{v_x^2} + \overline{v_y^2} + \overline{v_z^2} = 3\,\overline{v_x^2} \quad\Rightarrow\quad \overline{v_x^2} = \frac{1}{3}\overline{v^2}

Substitute. Write n_v = N/V for the number density and ρ = mN/V for the density.

P=13 nv m v2‾=13 ρ vrms2P = \frac{1}{3}\,n_v\,m\,\overline{v^2} = \frac{1}{3}\,\rho\,v_{rms}^2

The root mean square speed v_rms is the square root of the mean of v².

vrms=v2‾=3Pρv_{rms} = \sqrt{\overline{v^2}} = \sqrt{\frac{3P}{\rho}}

3.4 Points to notice in the derivation

  • Shape does not matter. We used a cube for ease. The result is the same for any container, because pressure is the same on every wall of a gas in equilibrium.

  • Molecule–molecule collisions do not matter. They are elastic and conserve total momentum. They swap velocities around but do not change the average of vₓ² for the gas.

  • Only translational motion enters. Spinning or vibrating molecules do not push on walls any harder. So pressure depends only on translational kinetic energy.

  • Random motion gives the factor ⅓. Without assumption 3, we could not replace vₓ² by ⅓ v².

3.5 Pressure and kinetic energy

The translational kinetic energy per unit volume is E = ½ n_v m v² (using the mean of v²). Compare with P.

P=13nvmv2‾=23(12nvmv2‾)=23EP = \frac{1}{3} n_v m \overline{v^2} = \frac{2}{3}\left(\frac{1}{2} n_v m \overline{v^2}\right) = \frac{2}{3}E

So the pressure of an ideal gas is two-thirds of its translational kinetic energy per unit volume. Multiply by V for the whole sample.

PV=23Etotal⇒Etotal=32PVPV = \frac{2}{3}E_{\text{total}} \qquad\Rightarrow\qquad E_{\text{total}} = \frac{3}{2}PV

A tyre at 2 atm holds roughly 3 × 10⁵ J of translational kinetic energy in every cubic metre of air.

3.6 Kinetic theory explains the gas laws

Boyle's law. PV = ⅔ E_total. If temperature is fixed, the kinetic energy of the gas is fixed (Chapter 4 shows why). So PV is constant.

Dalton's law. In a mixture, each gas hits the walls independently. The forces simply add.

P=13n1m1v12‾+13n2m2v22‾+⋯=P1+P2+…P = \frac{1}{3}n_1 m_1 \overline{v_1^2} + \frac{1}{3}n_2 m_2 \overline{v_2^2} + \dots = P_1 + P_2 + \dots

Graham's law of diffusion. At the same pressure, v_rms = √(3P/ρ). So lighter gases have faster molecules, and the rate of diffusion goes as 1/√ρ.

3.7 Pressure from a beam of molecules

Sometimes NEET gives a stream of molecules hitting a wall, all with the same speed. Say n molecules hit an area A each second, each of mass m and speed v, at angle θ to the normal. Each bounces elastically.

Only the normal component v cos θ reverses. Each molecule gives the wall 2mv cos θ of momentum.

F=2nmvcos⁡θ,P=2nmvcos⁡θAF = 2 n m v\cos\theta, \qquad P = \frac{2 n m v\cos\theta}{A}

Worked examples

Worked example 3.1: An oxygen molecule (m = 5.3 × 10⁻²⁶ kg) moving at 500 m/s hits a wall head-on and bounces back elastically. Find the momentum given to the wall.

Solution: Δp = 2mv = 2 × 5.3 × 10⁻²⁶ × 500 = 5.3 × 10⁻²³ kg m/s.

Worked example 3.2: Air at 1.0 × 10⁵ Pa has density 1.2 kg/m³. Find the rms speed of its molecules.

Solution: v_rms = √(3P/ρ) = √(3 × 1.0 × 10⁵/1.2) = √(2.5 × 10⁵) = 500 m/s. Faster than a passenger jet.

Worked example 3.3: Hydrogen at some temperature has density 0.090 kg/m³ and v_rms = 1840 m/s. Find its pressure.

Solution: P = ⅓ ρ v²_rms = ⅓ × 0.090 × (1840)² ≈ 1.02 × 10⁵ Pa, about 1 atm.

Worked example 3.4: Find the translational kinetic energy per cubic metre of a gas at 1 atm.

Solution: E = 3P/2 = 1.5 × 1.013 × 10⁵ ≈ 1.52 × 10⁵ J/m³. This holds for every ideal gas at 1 atm, whatever its molecules.

Worked example 3.5: A 2.0 L flask holds gas at 3.0 atm. Find the total translational kinetic energy of the gas.

Solution: E_total = 1.5 PV = 1.5 × 3.0 × 1.013 × 10⁵ × 2.0 × 10⁻³ ≈ 912 J.

Worked example 3.6: In a gas, the mass of each molecule is halved, the number density is doubled and the rms speed is doubled. What happens to the pressure?

Solution: P = ⅓ n_v m v²_rms. New P ∝ (2)(½)(2)² = 4. The pressure becomes 4 times.

Worked example 3.7: A cricket ball of mass 0.16 kg moves at 5 m/s back and forth between two rigid walls 2 m apart, bouncing elastically. Find the average force on one wall. (This is the one-molecule model, made big.)

Solution: F = mv²/l = 0.16 × 25/2 = 2.0 N. Check: each hit gives 2mv = 1.6 kg m/s, and hits come every 2l/v = 0.8 s. 1.6/0.8 = 2.0 N.

Worked example 3.8 (NEET-hard): Each second, 2.0 × 10²³ helium atoms (m = 6.6 × 10⁻²⁷ kg) hit a 4.0 cm² wall at 800 m/s. They strike at 60° to the normal and rebound elastically. Find the pressure on the wall.

Solution: Momentum per atom = 2mv cos 60° = 2 × 6.6 × 10⁻²⁷ × 800 × 0.5 = 5.28 × 10⁻²⁴ kg m/s. Force F = 2.0 × 10²³ × 5.28 × 10⁻²⁴ ≈ 1.06 N. Pressure = 1.06/(4.0 × 10⁻⁴) ≈ 2.6 × 10³ Pa.

Quick revision

  • Ideal gas model: point molecules, random motion, no forces except in collisions, elastic collisions, negligible collision time.

  • One molecule on a wall: Δp = 2mvₓ, time between hits 2l/vₓ, force mvₓ²/l.

  • Random motion: mean vₓ² = ⅓ mean v².

  • P = ⅓ n_v m v²_rms = ⅓ ρ v²_rms; v_rms = √(3P/ρ).

  • P = ⅔ E (translational KE per unit volume); E_total = 1.5 PV.

  • Beam: P = 2nmv cos θ / A.

  • Pressure depends on n_v, m and v²_rms only, not on container shape.

NEET traps

  • Writing the momentum change as mv instead of 2mv for an elastic bounce.

  • Using l instead of 2l for the time between hits on the same face.

  • Using sin θ when the angle is measured from the normal. With the normal, use cos θ.

  • Thinking P = ⅔ E uses total internal energy. E here is only translational KE per unit volume.

  • Believing collisions between molecules reduce pressure in an ideal gas. They do not change it.

  • Squaring the speed after averaging. v_rms is the square root of the average of v², not the average speed.

Practice MCQs: Chapter 3

Level 1: Concept check

1. Which is NOT an assumption of the kinetic theory of an ideal gas? (a) Molecules move randomly (b) Collisions are elastic (c) Collision time is negligible (d) Molecules attract each other strongly between collisions

2. In kinetic theory, collisions of molecules with the walls are taken as (a) perfectly inelastic (b) perfectly elastic (c) partly elastic (d) sticky

3. A molecule of mass m hits a wall normally with speed v and rebounds elastically. The change in its momentum has magnitude (a) 2mv (b) mv (c) zero (d) mv/2

4. The pressure of an ideal gas of density ρ is (a) ρv²_rms (b) ½ ρv²_rms (c) ⅓ ρv²_rms (d) ⅔ ρv²_rms

5. A molecule moves in a cube of side l with x-component of velocity vₓ. The time between its successive hits on the same x-face is (a) l/vₓ (b) l/2vₓ (c) 4l/vₓ (d) 2l/vₓ

6. If E is the translational kinetic energy per unit volume of an ideal gas, its pressure is (a) ⅔ E (b) ⅓ E (c) 3E/2 (d) E

7. In kinetic theory, the total volume of the molecules themselves is taken as (a) equal to the container volume (b) half the container volume (c) negligible compared with the container volume (d) larger at higher temperature

8. In the kinetic theory model, the effect of gravity on gas molecules is (a) the main cause of pressure (b) neglected (c) included for heavy gases only (d) equal to the pressure

9. The pressure of a gas on a container wall is caused by (a) the weight of the gas (b) attraction between molecules and the wall (c) collisions between molecules (d) momentum delivered by molecules hitting the wall

10. Between collisions, a gas molecule in the ideal model moves (a) in a straight line at constant speed (b) in a circle (c) in a parabola under gravity (d) with steadily falling speed

Level 2: NEET standard

11. A gas at 3.0 × 10⁵ Pa has density 3.6 kg/m³. The rms speed of its molecules is (a) 250 m/s (b) 289 m/s (c) 500 m/s (d) 866 m/s

12. A gas has density 0.18 kg/m³ and rms speed 1300 m/s. Its pressure is about (a) 1.0 × 10⁵ Pa (b) 3.0 × 10⁵ Pa (c) 7.8 × 10⁴ Pa (d) 2.3 × 10⁴ Pa

13. The translational kinetic energy per unit volume of an ideal gas at 2 atm is about (a) 1.0 × 10⁵ J/m³ (b) 3.0 × 10⁵ J/m³ (c) 1.5 × 10⁵ J/m³ (d) 6.1 × 10⁵ J/m³

14. At constant density, the rms speed of the molecules of a gas is doubled. The pressure becomes (a) half (b) double (c) unchanged (d) four times

15. The number of molecules per unit volume of a gas is halved, with v_rms unchanged. The pressure (a) doubles (b) is unchanged (c) halves (d) becomes one-fourth

16. A 5.0 L vessel holds an ideal gas at 1.0 × 10⁵ Pa. The total translational kinetic energy of the gas is (a) 500 J (b) 750 J (c) 1000 J (d) 333 J

17. Each second, N molecules, each of mass m, hit unit area of a wall normally with speed v and rebound elastically. The pressure is (a) 2Nmv (b) Nmv (c) Nmv² (d) Nmv/2

18. In Q17, the molecules instead strike at angle θ to the normal. The pressure becomes (a) 2Nmv sin θ (b) Nmv cos θ (c) 2Nmv tan θ (d) 2Nmv cos θ

19. Collisions between molecules are ignored in the pressure derivation because (a) they never happen (b) they are inelastic (c) they conserve total momentum and do not change the average momentum flow to the walls (d) they only happen at the walls

20. For a mixture of two ideal gases, kinetic theory gives the total pressure as (a) ⅓(n₁m₁ + n₂m₂)(v₁ + v₂)² (b) ⅓(n₁m₁v₁² + n₂m₂v₂²), with v the rms speeds (c) ⅓ n₁m₁v₁² only (d) the larger of the two partial pressures

21. Two gases are at the same pressure. Their densities are in the ratio 1 : 4. Their rms speeds are in the ratio (a) 2 : 1 (b) 1 : 2 (c) 4 : 1 (d) 1 : 4

22. A molecule of mass m moves in a cube of side l with x-velocity vₓ. The average force it exerts on one x-face is (a) mvₓ/l (b) 2mvₓ²/l (c) mvₓ²/2l (d) mvₓ²/l

Level 3: Challenge

23. Each second, 2.0 × 10²³ helium atoms (mass 6.6 × 10⁻²⁷ kg) hit a 4.0 cm² wall at 800 m/s, at 60° to the normal, and rebound elastically. The pressure is about (a) 5.3 kPa (b) 2.6 kPa (c) 1.3 kPa (d) 4.6 kPa

24. The mass of each molecule is halved, the number density doubled and the rms speed doubled. The pressure becomes (a) 2 times (b) 8 times (c) 4 times (d) unchanged

25. Half the molecules are removed from a rigid vessel, and the rms speed of the rest is doubled. The pressure becomes (a) 2 times (b) 4 times (c) half (d) unchanged

26. A 1.0 L flask holds an ideal gas at 1 atm. The total translational kinetic energy of the gas is about (a) 101 J (b) 67.5 J (c) 304 J (d) 152 J

27. A 0.1 kg ball moves at 10 m/s back and forth between two rigid walls 2 m apart, with elastic bounces. The average force on one wall is (a) 10 N (b) 5 N (c) 2.5 N (d) 1 N

28. In the derivation of P = ⅓ ρv²_rms, mean vₓ² is replaced by ⅓ of mean v². This step uses the assumption that (a) collisions are elastic (b) molecules are point masses (c) motion is random, with no preferred direction (d) gravity is negligible

29. Assertion (A): The pressure of an ideal gas in equilibrium does not depend on the shape of its container. Reason (R): The expression P = ⅓ ρv²_rms contains no quantity that describes the container's shape. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The pressure of an ideal gas equals two-thirds of its translational kinetic energy per unit volume. Statement II: Collisions between gas molecules change the total momentum of the gas. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dIdeal model has no forces between collisions.
2bElastic collisions are assumed.
3amv to −mv gives a change of 2mv.
4cResult of the kinetic theory derivation.
5dRound trip of 2l at speed vₓ.
6aP = ⅓ n m v² = ⅔ (½ n m v²).
7cMolecules are treated as points.
8bGravity is assumed negligible.
9dPressure is momentum flow to the wall per unit area.
10aNo forces between collisions, so uniform motion.
11c√(3 × 3.0 × 10⁵/3.6) = √(2.5 × 10⁵) = 500 m/s.
12a⅓ × 0.18 × 1300² ≈ 1.01 × 10⁵ Pa.
13b1.5 × 2 × 1.013 × 10⁵ ≈ 3.0 × 10⁵ J/m³.
14dP ∝ v²_rms.
15cP ∝ n_v.
16b1.5 × 1.0 × 10⁵ × 5 × 10⁻³ = 750 J.
17aEach molecule gives 2mv; N per second per unit area.
18dOnly the normal component v cos θ reverses.
19cElastic, momentum-conserving collisions leave the average unchanged.
20bPartial pressures add (Dalton).
21av_rms ∝ 1/√ρ at the same P.
22d2mvₓ per 2l/vₓ seconds.
23bF = 2 × 10²³ × 2 × 6.6 × 10⁻²⁷ × 800 × 0.5 ≈ 1.06 N; P ≈ 2.6 kPa.
24c(2)(½)(2²) = 4.
25a(½)(2²) = 2.
26d1.5 × 1.013 × 10⁵ × 10⁻³ ≈ 152 J.
27bmv²/l = 0.1 × 100/2 = 5 N.
28cIsotropy makes the three averages equal.
29aBoth true; R gives the reason.
30cElastic collisions conserve total momentum, so II is false.

Chapter 3 revision sheet

One-page summary

  • Kinetic theory pictures a gas as a huge number of tiny molecules in random motion.

  • Assumptions: point-size molecules, random motion, elastic collisions, no forces except during collisions, collision time negligible.

  • One molecule hitting a wall head-on with x-speed vₓ: momentum change = 2mvₓ.

  • In a cube of side l, the same molecule returns to that wall after time 2l/vₓ.

  • Average force by one molecule on the wall = mvₓ²/l.

  • Random motion means mean vₓ² = mean vᵧ² = mean v_z² = ⅓ mean v².

  • Pressure: P = ⅓ n_v m v²_rms = ⅓ ρ v²_rms, where n_v is number per unit volume.

  • So v_rms = √(3P/ρ). At fixed pressure, a denser gas has slower molecules.

  • Translational KE per unit volume E = ½ ρ v²_rms, so P = ⅔ E.

  • For the whole gas: PV = ⅔ E_total, so E_total = 1.5 PV.

  • Boyle's law: at fixed T the total KE is fixed, so PV is constant.

  • Dalton's law: each gas adds ⅔ of its own KE per unit volume to the pressure.

  • Graham's law: at the same P, v_rms ∝ 1/√ρ, so lighter gases effuse faster.

  • Beam of n molecules per second on area A at angle θ to the normal (elastic): P = 2nmv cos θ / A. If molecules stick, pressure is half of this.

  • Pressure does not depend on the shape of the container.

Must-remember table

QuantityFormulaRemember
Momentum change per hit2mvₓElastic bounce reverses vₓ
Time between hits on one wall2l/vₓRound trip of length 2l
Force by one moleculemvₓ²/lThe two 2s cancel
Pressure⅓ ρ v²_rmsSI unit Pa = N/m²
rms speed√(3P/ρ)Use ρ in kg/m³
Pressure and energy densityP = ⅔ EE in J/m³, same unit as Pa
Total translational KE1.5 PVIn joules when P in Pa, V in m³
Beam pressure (elastic)2nmv cos θ / AHalve it if molecules stick

Memory aids

  • PRE-NIL for the assumptions: P = Point-size molecules, R = Random motion, E = Elastic collisions, N = No forces between collisions, I = Instant collisions (negligible duration), L = Large number of molecules.

  • "One-third rho v-squared, two-thirds energy": P = ⅓ρv²_rms and P = ⅔E. The fraction with "energy" is the bigger one.

  • "Hit twice, travel twice": Δp = 2mvₓ and Δt = 2l/vₓ. The 2s cancel, leaving F = mvₓ²/l.

  • "One and a half PV": total translational KE of any ideal gas sample = 1.5 PV.

Concept connections

  • Physics Book 3: Laws of Motion gives F = Δp/Δt, the starting point of the pressure derivation.

  • Physics Book 8: Thermodynamics uses PV and internal energy; E_total = 1.5 PV links the two books.

  • Physics Book 7: Properties of Solids and Liquids defines pressure as force per unit area, used here at the molecular level.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I with List II for one molecule (mass m) in a cube of side l, and for the gas as a whole.

  • List I: A. Pressure in terms of ρ and v_rms; B. Pressure in terms of E (translational KE per unit volume); C. Momentum change of one molecule per head-on wall hit; D. Time between successive hits on the same wall

  • List II: (i) 2l/vₓ; (ii) ⅓ρv²_rms; (iii) 2mvₓ; (iv) ⅔E

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-iii, B-i, C-ii, D-iv

32. Match each gas law with its kinetic theory explanation.

  • List I: A. Boyle's law; B. Dalton's law; C. Avogadro's law; D. Graham's law

  • List II: (i) Equal P and T give equal KE per molecule and equal ⅔E, so equal volumes hold equal numbers of molecules; (ii) at the same P, v_rms ∝ 1/√ρ, so lighter gases escape faster; (iii) at fixed T the total KE is fixed, so PV = ⅔E_total is constant; (iv) each gas in a mixture contributes ⅔ of its own KE per unit volume

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-ii, D-i (c) A-i, B-iv, C-iii, D-ii (d) A-iii, B-ii, C-i, D-iv

33. Four gas samples are each at pressure 1.0 × 10⁵ Pa. Match the density with the rms speed.

  • List I: A. ρ = 0.090 kg/m³; B. ρ = 1.2 kg/m³; C. ρ = 3.0 kg/m³; D. ρ = 0.30 kg/m³

  • List II: (i) 500 m/s; (ii) 1000 m/s; (iii) 316 m/s; (iv) 1826 m/s

(a) A-i, B-iv, C-iii, D-ii (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-ii, B-i, C-iii, D-iv

34. A gas has pressure P. Match each change with the new pressure (all other quantities unchanged).

  • List I: A. v_rms doubled; B. Number density tripled; C. Number density halved; D. v_rms halved

  • List II: (i) 3P; (ii) P/4; (iii) 4P; (iv) P/2

(a) A-iii, B-iv, C-i, D-ii (b) A-ii, B-i, C-iv, D-iii (c) A-i, B-iii, C-ii, D-iv (d) A-iii, B-i, C-iv, D-ii

35. How many of the following statements about the kinetic theory model are correct?

  • A. Molecules are taken to be very small compared with the average distance between them.

  • B. Collisions of molecules with the walls are taken to be inelastic.

  • C. The pressure of an ideal gas depends on the shape of the container.

  • D. The mean value of vₓ² is one-third of the mean value of v².

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of statements.

  • A. P = ⅔E, where E is the translational KE per unit volume.

  • B. The total translational KE of an ideal gas sample is 1.5 PV.

  • C. If the density doubles at fixed pressure, v_rms doubles.

  • D. For a fixed sample at fixed temperature, PV stays constant.

(a) A and B only (b) A, C and D only (c) A, B and D only (d) B and C only

37. A beam of identical molecules strikes a flat wall. Choose the correct set of statements.

  • A. If the molecules stick to the wall instead of bouncing back elastically, the pressure is halved.

  • B. For a beam at angle θ to the normal, the momentum change per elastic hit is 2mv cos θ.

  • C. The pressure is largest when the beam moves almost parallel to the wall (θ close to 90°).

  • D. Doubling the speed of the molecules at the same number density in the beam doubles the pressure.

(a) A and B only (b) B and C only (c) A, B and D only (d) C and D only

38. How many of the following statements are correct?

  • A. In a cube of side l, a molecule hits the same wall again after time 2l/vₓ.

  • B. The average force by one molecule on that wall is mvₓ²/l.

  • C. If number density and v_rms are fixed, the pressure does not depend on the mass of a molecule.

  • D. Collisions between molecules do not change the pressure result, because they conserve momentum and are elastic.

(a) One (b) Two (c) Three (d) Four

39. For two ideal gases A and B at the same number density, a graph of pressure P (y-axis) against v²_rms (x-axis) is a straight line through the origin for each. The slope for A is twice the slope for B. The ratio of molecular masses m_A/m_B is (a) 1/2 (b) √2 (c) 4 (d) 2

40. The table gives pressure and density for four gas samples.

SampleP (kPa)ρ (kg/m³)
P11001.2
P22003.0
P31501.0
P43004.0

Which sample has the largest rms speed, and what is it? (a) P1, 500 m/s (b) P3, 671 m/s (c) P4, 474 m/s (d) P2, 447 m/s

41. For an ideal gas, a graph of translational KE per unit volume E (y-axis) against pressure P (x-axis) is a straight line through the origin. Its slope is (a) 3 (b) 1/3 (c) 2/3 (d) 3/2

Passage for Q42–43: A steel tank on a hospital trolley has volume 0.50 m³. It holds 1.2 kg of a gas at pressure 2.0 × 10⁵ Pa. Treat the gas as ideal.

42. The rms speed of the molecules is (a) 250 m/s (b) 707 m/s (c) 500 m/s (d) 354 m/s

43. The total translational kinetic energy of the gas in the tank is (a) 1.0 × 10⁵ J (b) 3.0 × 10⁵ J (c) 6.7 × 10⁴ J (d) 1.5 × 10⁵ J

44. A beam delivers 1.0 × 10²³ molecules per second onto a wall area of 1.0 cm². Each molecule has mass 5.0 × 10⁻²⁶ kg and speed 400 m/s, moves at 60° to the normal and bounces elastically. The pressure on the wall is (a) 4.0 × 10⁴ Pa (b) 2.0 × 10⁴ Pa (c) 3.5 × 10⁴ Pa (d) 1.0 × 10⁴ Pa

45. A vessel holds two gases. Gas A has translational KE per unit volume 1.5 × 10⁵ J/m³ and gas B has 0.75 × 10⁵ J/m³. Find the total pressure. Then gas B is pumped out and the rms speed of A is doubled at fixed volume. Find the new pressure. (a) 1.5 × 10⁵ Pa, 4.0 × 10⁵ Pa (b) 2.25 × 10⁵ Pa, 6.0 × 10⁵ Pa (c) 1.5 × 10⁵ Pa, 2.0 × 10⁵ Pa (d) 1.0 × 10⁵ Pa, 4.0 × 10⁵ Pa

Level 4 answer key

QAnsReason
31c⅓ρv², ⅔E, 2mvₓ, 2l/vₓ
32aBoyle: fixed KE; Dalton: add ⅔E; Avogadro: equal N; Graham: 1/√ρ
33bv = √(3P/ρ): 1826, 500, 316, 1000 m/s
34dP ∝ n_v v²: 4P, 3P, P/2, P/4
35bA and D true; collisions are elastic; shape does not matter
36cC false: v_rms falls by √2 when ρ doubles
37aC false (cos θ → 0); D false: flux also doubles, so P becomes 4 times
38cA, B, D true; C false since P = ⅓ n_v m v²
39dSlope = ⅓ n_v m, so m_A/m_B = 2
40b3P/ρ largest for P3: √(4.5 × 10⁵) = 671 m/s
41dE = 3P/2
42cρ = 2.4 kg/m³; v = √(6 × 10⁵/2.4) = 500 m/s
43d1.5 × 2.0 × 10⁵ × 0.50 = 1.5 × 10⁵ J
44b2 × 10²³ × 5 × 10⁻²⁶ × 400 × 0.5 / 10⁻⁴ = 2.0 × 10⁴ Pa
45a⅔ × 2.25 × 10⁵ = 1.5 × 10⁵ Pa; ⅔ × 1.5 × 10⁵ × 4 = 4.0 × 10⁵ Pa
25 min left
‹
›