Chapter 2: Simple Harmonic Motion
What you will learn
The defining condition of SHM: acceleration proportional to displacement and directed towards the mean position.
The SHM equation x = A sin(ωt + φ) and the meaning of amplitude, phase and phase constant.
Velocity and acceleration in SHM, both as functions of time and of displacement.
The phase relations between x, v and a, and their graphs.
SHM as the projection of uniform circular motion, and how to use phase to find times.
2.1 The condition for SHM
A body performs simple harmonic motion when the restoring force on it is proportional to its displacement from the mean position and acts towards that position.
The minus sign says the force always points back towards x = 0. The constant k is the force constant. Dividing by the mass m,
This is the test for SHM. If you can show a = −(positive constant) × x, the motion is SHM, and the square root of that constant is ω.
2.2 The equation of SHM
We need a function whose second derivative is −ω² times itself. Sine and cosine do this. Try
Differentiate twice:
So it works for any A and φ. These two constants are fixed by how the motion starts.
A is the amplitude: the largest displacement. x swings between +A and −A.
(ωt + φ) is the phase at time t. It tells where the particle is and which way it is moving.
φ is the phase constant (initial phase): the phase at t = 0.
ω is the angular frequency, and T = 2π/ω = 2π√(m/k).
The cosine form x = A cos(ωt + φ') is equally correct. It is just the sine form with φ' = φ − π/2. Use cosine when the particle starts at an extreme, and sine when it starts at the mean.
2.3 Phase and phase difference
Two particles with the same phase are at the same point and moving the same way. A phase difference of 2π is the same as zero.
For two SHMs of the same ω, x₁ = A sin(ωt + φ₁) and x₂ = A sin(ωt + φ₂), the phase difference φ₂ − φ₁ stays constant with time.
Before comparing phases, write both in the same function. Use cos θ = sin(θ + π/2). So A cos ωt = A sin(ωt + π/2).
To find φ from a starting condition, use both x and the direction of v at t = 0. With x = A sin(ωt + φ):
| At t = 0 | sin φ | Sign of v | φ |
|---|---|---|---|
| At mean, moving to +x | 0 | + | 0 |
| At +A | 1 | 0 | π/2 |
| At mean, moving to −x | 0 | − | π |
| At +A/2, moving to +x | 1/2 | + | π/6 |
| At +A/2, moving to −x | 1/2 | − | 5π/6 |
| At −A | −1 | 0 | 3π/2 (or −π/2) |
2.4 Velocity in SHM
From x = A sin(ωt + φ),
To get v in terms of x, use cos = √(1 − sin²):
At the mean position (x = 0), speed is largest: v_max = Aω. At the extremes (x = ±A), the particle stops for an instant: v = 0.
Squaring and rearranging gives x²/A² + v²/(Aω)² = 1. So the v-x graph is an ellipse. If Aω = A (that is, ω = 1), it becomes a circle.
2.5 Acceleration in SHM
Differentiate once more:
Acceleration is zero at the mean position and largest at the extremes: a_max = Aω². The a-x graph is a straight line through the origin with slope −ω².
Useful ratio: a_max / v_max = ω. And v_max² / a_max = A.
| Quantity | At mean (x = 0) | At extreme (x = ±A) |
|---|---|---|
| Displacement | 0 | ±A (maximum) |
| Speed | Aω (maximum) | 0 |
| Acceleration | 0 | ∓Aω² (maximum) |
| Restoring force | 0 | maximum, towards mean |
2.6 Phase relations and graphs
Write all three as sines:
So velocity leads displacement by π/2. Acceleration leads velocity by π/2, and leads displacement by π. Displacement and acceleration are always opposite in sign.
On the graphs, a lead of π/2 means the v-t curve reaches its peak a quarter period (T/4) before the x-t curve does.

When x is at its peak (t = T/4), v is zero and a is at its most negative; v reached its peak a quarter period earlier, at t = 0.
2.7 SHM as projection of uniform circular motion
Imagine a point P moving round a circle of radius A with constant angular speed ω, like a mark on the edge of a ceiling fan blade seen in a strobe light. Drop a perpendicular from P onto a diameter. The foot of the perpendicular, call it Q, moves to and fro along the diameter.
If OP makes angle (ωt + φ) with the x-axis, then Q is at x = A cos(ωt + φ). Its projection on the y-axis is y = A sin(ωt + φ). Both are SHM.
Radius of the circle = amplitude A.
Angular speed of P = angular frequency ω of the SHM.
Angle of OP at time t = phase of the SHM.
Speed of P is Aω. The component of this along the diameter is the SHM velocity; it is largest when Q is at the centre.
Centripetal acceleration of P is Aω². Its component along the diameter is the SHM acceleration.
This picture is the fastest way to find times in SHM. The time to move between two points equals (angle swept by P) / ω.
2.8 Using phase to find times
Start at the mean position. The phase grows by ωt. To reach x = A/2, sin(ωt) = 1/2, so ωt = π/6, giving t = T/12.
| Motion | Phase change | Time |
|---|---|---|
| 0 to A/2 | π/6 | T/12 |
| 0 to A/√2 | π/4 | T/8 |
| 0 to √3A/2 | π/3 | T/6 |
| 0 to A | π/2 | T/4 |
| A/2 to A | π/3 | T/6 |
| −A/2 to +A/2 | π/3 | T/6 |
In one full cycle the particle covers distance 4A. So the average speed over a cycle is 4A/T = 2Aω/π, which is (2/π) times v_max. The average velocity over a full cycle is zero.
Worked example 2.1: A particle moves as x = 0.05 sin(4πt + π/6) m. Find the amplitude, angular frequency, time period, frequency, phase constant and the displacement at t = 0.
Solution: A = 0.05 m. ω = 4π rad/s, so T = 2π/4π = 0.5 s and ν = 2 Hz. φ = π/6. At t = 0, x = 0.05 sin(π/6) = 0.025 m.
Worked example 2.2: A body in SHM has amplitude 4 cm and period 2 s. Find its maximum speed and maximum acceleration.
Solution: ω = 2π/2 = π rad/s. v_max = Aω = 4π ≈ 12.6 cm/s. a_max = Aω² = 4π² ≈ 39.5 cm/s².
Worked example 2.3: Find the speed at x = A/2 as a fraction of the maximum speed.
Solution: v = ω√(A² − A²/4) = ωA√3/2. So v = (√3/2) v_max ≈ 0.87 v_max. Note that at half the amplitude the speed is still 87% of its maximum.
Worked example 2.4: A particle has speed 8 cm/s at x = 3 cm and 6 cm/s at x = 4 cm. Find the amplitude and the time period.
Solution: Use v² = ω²(A² − x²). So 64 = ω²(A² − 9) and 36 = ω²(A² − 16). Subtracting, 28 = 7ω², so ω = 2 rad/s. Then A² − 9 = 16, so A = 5 cm. T = 2π/2 = π s ≈ 3.14 s.
Worked example 2.5: A particle in SHM has period 2.4 s. How long does it take to go from the mean position to half the amplitude?
Solution: sin(ωt) = 1/2 gives ωt = π/6. So t = T/12 = 2.4/12 = 0.2 s.
Worked example 2.6: At t = 0, a particle is at x = +A/2 and moving towards the mean position. Write its equation in the form x = A sin(ωt + φ).
Solution: sin φ = 1/2, so φ = π/6 or 5π/6. It moves towards the mean, so v = Aω cos φ must be negative. cos(5π/6) is negative. So φ = 5π/6 and x = A sin(ωt + 5π/6).
Worked example 2.7: Find the phase difference between x₁ = 4 sin(10t + π/6) and x₂ = 5 cos(10t).
Solution: Write x₂ = 5 sin(10t + π/2). Phase difference = π/2 − π/6 = π/3. The second motion leads by π/3. The different amplitudes do not matter.
Worked example 2.8: A point moves round a circle of radius 0.2 m at 120 rpm. Its shadow falls on a wall as a to-and-fro motion. Find the amplitude, angular frequency and maximum speed of the shadow.
Solution: 120 rpm = 2 rev/s, so ω = 4π rad/s. Amplitude = radius = 0.2 m. v_max = Aω = 0.8π ≈ 2.51 m/s.
Worked example 2.9 (NEET-hard): In an SHM the maximum speed is 10 cm/s and the maximum acceleration is 50 cm/s². Find the amplitude and period.
Solution: ω = a_max / v_max = 50/10 = 5 rad/s. A = v_max / ω = 2 cm. T = 2π/5 ≈ 1.26 s.
Quick revision
SHM condition: a = −ω²x (or F = −kx). ω = √(k/m).
x = A sin(ωt + φ); phase = ωt + φ; φ = phase at t = 0.
v = ±ω√(A² − x²); v_max = Aω at the mean.
a = −ω²x; a_max = Aω² at the extremes.
v leads x by π/2; a leads x by π.
v-x graph: ellipse. a-x graph: straight line of slope −ω².
Mean to A/2: T/12. A/2 to A: T/6. Mean to extreme: T/4.
Average speed over a cycle = 4A/T = (2/π) v_max.
NEET traps
Using v_max = Aω at any point. Away from the mean use ω√(A² − x²).
Thinking the time from 0 to A/2 is T/8. It is T/12, because the particle is fastest near the mean.
Comparing phases of a sine and a cosine without converting first.
Choosing φ from sin φ alone. Check the sign of v at t = 0 too.
Saying acceleration is zero at the extreme because velocity is zero there. It is maximum there.
Taking the average velocity over a full cycle as 4A/T. That is the average speed; the average velocity is zero.
Practice MCQs: Chapter 2
Level 1: Concept check
1. In SHM, the acceleration of the particle is proportional to (a) its velocity (b) its displacement, directed towards the mean position (c) its displacement, directed away from the mean position (d) the square of its displacement
2. The speed of a particle in SHM is maximum at (a) the mean position (b) the extreme positions (c) half the amplitude (d) all points equally
3. For x = 0.1 sin(20t) m, the maximum speed is (a) 0.1 m/s (b) 20 m/s (c) 2 m/s (d) 200 m/s
4. The phase difference between displacement and acceleration in SHM is (a) 0 (b) π/2 (c) π/4 (d) π
5. At an extreme position in SHM, the velocity is (a) zero (b) maximum (c) Aω/2 (d) equal to the acceleration
6. A particle in SHM has A = 0.02 m and ω = 10 rad/s. Its maximum acceleration is (a) 0.2 m/s² (b) 20 m/s² (c) 2 m/s² (d) 0.02 m/s²
7. In SHM, the velocity leads the displacement by (a) 0 (b) π/2 (c) π (d) 3π/2
8. The projection of uniform circular motion on a diameter of the circle is (a) uniform linear motion (b) uniformly accelerated motion (c) circular motion (d) simple harmonic motion
9. The SI unit of the phase of an SHM is (a) metre (b) second (c) radian (d) hertz
10. Which equation describes SHM? (a) d²x/dt² = −ω²x (b) d²x/dt² = ω²x (c) d²x/dt² = −ωx² (d) dx/dt = −ωx
Level 2: NEET standard
11. A particle in SHM has A = 5 cm and ω = 4 rad/s. Its speed at x = 3 cm is (a) 20 cm/s (b) 12 cm/s (c) 8 cm/s (d) 16 cm/s
12. In an SHM, v_max = 12 cm/s and a_max = 36 cm/s². The amplitude is (a) 3 cm (b) 4 cm (c) 12 cm (d) 1/3 cm
13. A particle in SHM has period 6 s. The time to go from the mean position to half the amplitude is (a) 0.5 s (b) 1 s (c) 1.5 s (d) 3 s
14. A particle in SHM has period 12 s. The time to go from x = A/2 to x = A is (a) 1 s (b) 3 s (c) 2 s (d) 4 s
15. For x = 2 sin(πt/2 + π/3) cm, the displacement at t = 0 is (a) 1 cm (b) √3 cm (c) 2 cm (d) 0
16. The phase difference between x₁ = A sin(ωt + π/6) and x₂ = A cos ωt is (a) π/6 (b) π/2 (c) 2π/3 (d) π/3
17. In SHM, the speed at x = A/2 is what fraction of the maximum speed? (a) √3/2 (b) 1/2 (c) 1/√2 (d) 3/4
18. At what displacement is the speed in SHM half its maximum value? (a) A/2 (b) A/√2 (c) √3A/2 (d) A/4
19. A particle performs SHM with amplitude 5 cm and period 2 s. Its average speed over one full cycle is (a) 5 cm/s (b) 10 cm/s (c) 2.5 cm/s (d) 20 cm/s
20. The graph of acceleration against displacement in SHM is (a) a parabola (b) a circle (c) a straight line with positive slope (d) a straight line through the origin with negative slope
21. The graph of velocity against displacement in SHM is (a) an ellipse (b) a parabola (c) a straight line (d) a hyperbola
22. A particle moves as x = 6 cos(πt/3) cm. Its acceleration at t = 1 s is (a) π²/3 cm/s² (b) −2π²/3 cm/s² (c) −π²/3 cm/s² (d) −π²/6 cm/s²
Level 3: Challenge
23. A particle in SHM has speed 12 cm/s at x = 3 cm and 9 cm/s at x = 4 cm. Its time period is (a) π s (b) 2π/3 s (c) π/3 s (d) 3π/2 s
24. Starting from the mean position, the ratio of the time taken to reach A/√2 to the time taken to go from A/√2 to A is (a) 1 : 1 (b) 1 : 2 (c) 2 : 1 (d) 1 : √2
25. A particle starts from the mean position at t = 0 and performs SHM with amplitude 4 cm and period 8 s. The distance covered in the first 3 s is (a) 2√2 cm (b) (4 + 2√2) cm (c) 6 cm (d) (8 − 2√2) cm
26. Two particles perform SHM of the same amplitude and frequency along the same line about the same mean position. They cross each other at x = A/2 moving in opposite directions. Their phase difference is (a) π/3 (b) π (c) 2π/3 (d) π/6
27. A particle starts at x = +A at t = 0 and performs SHM. Its velocity at t = T/8 is (a) zero (b) −Aω/√2 (c) −Aω (d) +Aω/√2
28. A particle performs SHM with period 0.2 s and amplitude 2 cm. Its maximum acceleration is (a) 2π² m/s² (b) π² m/s² (c) 4π² m/s² (d) 0.2π² m/s²
29. Assertion (A): In SHM, the acceleration is maximum at the extreme positions. Reason (R): In SHM, the restoring force is proportional to the displacement from the mean position. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: In SHM, velocity and acceleration are in phase. Statement II: In SHM, the graph of acceleration against displacement is a straight line of slope −ω². (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | a = −ω²x: proportional to x, towards the mean. |
| 2 | a | v = ω√(A² − x²) is largest at x = 0. |
| 3 | c | Aω = 0.1 × 20 = 2 m/s. |
| 4 | d | a = −ω²x, always opposite to x. |
| 5 | a | v = ω√(A² − A²) = 0. |
| 6 | c | Aω² = 0.02 × 100 = 2 m/s². |
| 7 | b | v = Aω cos ωt = Aω sin(ωt + π/2). |
| 8 | d | The foot of the perpendicular moves as A cos(ωt + φ). |
| 9 | c | Phase is an angle, measured in radians. |
| 10 | a | Acceleration equals −ω² times displacement. |
| 11 | d | v = 4√(25 − 9) = 16 cm/s. |
| 12 | b | ω = 36/12 = 3 rad/s; A = 12/3 = 4 cm. |
| 13 | a | T/12 = 6/12 = 0.5 s. |
| 14 | c | T/6 = 12/6 = 2 s. |
| 15 | b | 2 sin(π/3) = √3 cm. |
| 16 | d | A cos ωt = A sin(ωt + π/2); π/2 − π/6 = π/3. |
| 17 | a | ω√(A² − A²/4) = (√3/2)Aω. |
| 18 | c | A² − x² = A²/4 gives x = √3A/2. |
| 19 | b | 4A/T = 20/2 = 10 cm/s. |
| 20 | d | a = −ω²x is a line through the origin with negative slope. |
| 21 | a | x²/A² + v²/(Aω)² = 1. |
| 22 | c | a = −(π/3)² × 6 cos(π/3) = −π²/3 cm/s². |
| 23 | b | 144 − 81 = 7ω² gives ω = 3 rad/s; T = 2π/3 s. |
| 24 | a | Each part sweeps a phase of π/4, i.e. T/8 each. |
| 25 | d | 4 cm to the extreme in 2 s, then back to 2√2 cm at 3 s: 4 + (4 − 2√2). |
| 26 | c | Phases π/6 and 5π/6; difference 2π/3. |
| 27 | b | x = A cos ωt, v = −Aω sin(π/4) = −Aω/√2. |
| 28 | a | ω = 10π rad/s; a_max = 0.02 × 100π² = 2π² m/s². |
| 29 | a | a ∝ x, so a is largest where x is largest. |
| 30 | d | v and a differ in phase by π/2; II follows from a = −ω²x. |
Chapter 2 revision sheet
One-page summary
SHM: acceleration is proportional to displacement and directed towards the mean position, a = −ω²x.
Restoring force F = −kx gives a = −(k/m)x, so ω = √(k/m).
Equation: x = A sin(ωt + φ). A = amplitude, (ωt + φ) = phase, φ = initial phase (epoch).
Velocity v = Aω cos(ωt + φ) = ±ω√(A² − x²). Maximum Aω at the mean, zero at the extremes.
Acceleration a = −Aω² sin(ωt + φ) = −ω²x. Maximum Aω² at the extremes, zero at the mean.
Phase order: v leads x by π/2; a leads v by π/2; a and x differ by π (opposite).
Graphs: v–x is an ellipse, a–x is a straight line of slope −ω² through the origin, a–v is an ellipse.
SHM is the projection of uniform circular motion on a diameter. Circle radius = A, angular speed = ω.
Time from the mean to x = A/2, A/√2, (√3/2)A and A is T/12, T/8, T/6 and T/4.
From A/2 to A takes T/6; from the mean to A/2 takes only T/12 (the particle is faster near the mean).
Two (x, v) readings fix A and ω: v₁² − v₂² = ω²(x₂² − x₁²).
Average speed over one cycle = 4A/T = (2/π) v_max.
Must-remember table
| Quantity | At mean (x = 0) | At extreme (x = ±A) | General |
|---|---|---|---|
| Speed | Aω (max) | 0 | ω√(A² − x²) |
| Acceleration (magnitude) | 0 | Aω² (max) | ω² times magnitude of x |
| Phase from mean | 0 | π/2 | ωt |
| Time from mean | 0 | T/4 | t = (1/ω) sin⁻¹(x/A) |
Memory aids
"VAX": Velocity Ahead of X by 90°, Acceleration Against X (180°).
"12-8-6-4": times T/12, T/8, T/6, T/4 to reach A/2, A/√2, √3A/2, A from the mean.
"Mean is Max speed, Extreme is Max pull": speed peaks at the mean, acceleration at the extremes.
"Ellipse for v–x, line for a–x": the only straight-line graph of SHM is a against x.
Concept connections
The reference-circle picture uses centripetal acceleration Aω² from Physics Book 2: Kinematics.
F = ma and restoring forces come from Physics Book 3: Laws of Motion.
Alternating current i = i₀ sin ωt and its phase with voltage in Physics Book 14: Electromagnetic Induction and Alternating Currents use the same phase ideas.
Practice MCQs: Chapter 2, Level 4 (new NEET pattern)
31. For x = A sin ωt, match List I with List II.
List I:
(A) Speed at the mean position
(B) Magnitude of acceleration at an extreme
(C) Speed at x = A/2
(D) Magnitude of acceleration at x = A/2
List II:
(i) Aω²/2
(ii) Aω
(iii) (√3/2)Aω
(iv) Aω²
(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-iii, B-iv, C-ii, D-i
32. Match List I (pair) with List II (phase difference between them).
List I:
(A) Velocity and displacement in SHM
(B) Acceleration and displacement in SHM
(C) x₁ = A sin(ωt + π/6) and x₂ = A cos ωt
(D) x₁ = A sin ωt and x₂ = A sin(ωt + 2π/3)
List II:
(i) π/3
(ii) π
(iii) 2π/3
(iv) π/2
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-i, C-ii, D-iii
33. A particle starts from the mean position. Match List I (journey) with List II (shortest time), T being the period.
List I:
(A) Mean to x = A/2
(B) Mean to x = A/√2
(C) Mean to x = (√3/2)A
(D) Mean to x = A
List II:
(i) T/4
(ii) T/8
(iii) T/6
(iv) T/12
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-iv, B-ii, C-iii, D-i
34. For x = 0.1 sin(4t + π/4) in SI units, match List I with List II.
List I:
(A) Amplitude
(B) Maximum speed
(C) Maximum acceleration
(D) Time period
List II:
(i) 1.6 m/s²
(ii) π/2 s
(iii) 0.1 m
(iv) 0.4 m/s
(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
35. How many of the following statements about SHM are correct?
A. The acceleration is always directed towards the mean position.
B. The speed is greatest at the extreme positions.
C. v² = ω²(A² − x²).
D. The a–x graph is a straight line with negative slope.
(a) 2 (b) 3 (c) 4 (d) 1
36. Choose the correct set of statements.
A. The v–x graph of SHM is an ellipse.
B. The a–v graph of SHM is an ellipse.
C. The projection of uniform circular motion on a diameter is SHM.
D. In SHM, velocity and acceleration always point the same way.
(a) A, B and C only (b) A and B only (c) C and D only (d) A, C and D only
37. For x = 5 sin(πt) cm, t in s, how many statements are correct?
A. The period is 2 s.
B. At t = 0.5 s the particle is at an extreme.
C. The maximum speed is 5π cm/s.
D. At t = 1/6 s, x = 2.5 cm.
(a) 3 (b) 4 (c) 2 (d) 1
38. Choose the correct set of statements about the reference circle of an SHM.
A. Its angular speed equals the angular frequency of the SHM.
B. Its radius equals the amplitude.
C. The speed of the circling particle equals the SHM speed at every instant.
D. Its centripetal acceleration equals the maximum acceleration of the SHM.
(a) A, B and D only (b) A and B only (c) B and C only (d) A, C and D only
39. The v–x graph of a particle in SHM is an ellipse. It cuts the x-axis at ±4 cm and the v-axis at ±12 cm/s. The angular frequency is (a) 1/3 rad/s (b) 3 rad/s (c) 48 rad/s (d) 8 rad/s
40. The a–x graph of a particle is a straight line through the origin with slope −25 s⁻². The time period is (a) 25 s (b) 0.2π s (c) 5 s (d) 0.4π s
41. Readings for a particle in SHM:
| x (cm) | 3 | 4 |
|---|---|---|
| v (cm/s) | 8 | 6 |
The amplitude and angular frequency are (a) 5 cm, 4 rad/s (b) 7 cm, 2 rad/s (c) 5 cm, 2 rad/s (d) 4 cm, 3 rad/s
Case for Q42–43: A small bead is fixed on the rim of a potter's wheel of radius 20 cm. The wheel turns steadily at 30 rpm. A far-off lamp throws the bead's shadow on a wall, and the shadow moves back and forth along a straight line.
42. The amplitude and period of the shadow's motion are (a) 20 cm, 2 s (b) 40 cm, 2 s (c) 20 cm, 0.5 s (d) 10 cm, 2 s
43. The maximum speed of the shadow is (a) 10π cm/s (b) 40π cm/s (c) 600π cm/s (d) 20π cm/s
44. A particle in SHM has amplitude 10 cm and period 4 s. At t = 0 it is at x = +5 cm moving away from the mean. The time it takes to reach x = −5 cm for the first time is (a) 1 s (b) 2 s (c) 4/3 s (d) 2/3 s
45. For a particle in SHM, the ratio of its average speed over one full cycle to its maximum speed is (a) 2/π (b) π/2 (c) 1/2 (d) 1/√2
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | Aω at mean; Aω² at extreme; ω√(A² − A²/4) = (√3/2)Aω; ω²(A/2) |
| 32 | a | v leads by π/2; a opposite (π); cos ωt = sin(ωt + π/2) so gap π/3; 2π/3 directly |
| 33 | d | sin ωt = 1/2, 1/√2, √3/2, 1 give ωt = π/6, π/4, π/3, π/2 |
| 34 | c | A = 0.1 m; Aω = 0.4 m/s; Aω² = 1.6 m/s²; T = 2π/4 = π/2 s |
| 35 | b | B false: speed is zero at the extremes |
| 36 | a | D false: they are opposite while moving away from the mean |
| 37 | b | T = 2π/π = 2 s; sin(π/2) = 1; Aω = 5π; 5 sin(π/6) = 2.5 |
| 38 | a | C false: only the component of the circling velocity along the diameter equals the SHM speed |
| 39 | b | A = 4 cm, Aω = 12 cm/s, ω = 3 rad/s |
| 40 | d | ω² = 25, ω = 5 rad/s, T = 2π/5 = 0.4π s |
| 41 | c | 64 − 36 = ω²(16 − 9), ω = 2; A² = 9 + 16 = 25 |
| 42 | a | Amplitude = radius 20 cm; 30 rpm = 0.5 rev/s so T = 2 s |
| 43 | d | ω = 2π/2 = π rad/s, v_max = Aω = 20π cm/s |
| 44 | b | Phase goes from π/6 to 7π/6, a change of π, which is T/2 = 2 s |
| 45 | a | Average speed 4A/T, maximum 2πA/T, ratio 2/π |