Chapter 9 of 11 · 26 min read

Chapter 7: Nuclear Fission and Fusion

What you will learn

  • What happens in the fission of uranium-235, and where its 200 MeV comes from.

  • How a chain reaction works, and what the multiplication factor k means.

  • The parts of a nuclear reactor and the job of each.

  • What fusion is, why it needs tens of millions of kelvin, and how it powers the Sun.

  • How fission and fusion compare.

7.1 Nuclear fission

In 1938, Otto Hahn and Fritz Strassmann bombarded uranium with neutrons and found barium, a much lighter element, among the products. Lise Meitner and Otto Frisch explained it: the uranium nucleus had split into two medium-sized pieces. They called this fission.

A typical fission of uranium-235:

01n+92235U→92236U∗→56141Ba+3692Kr+3 01n+energy{}^{1}_{0}\text{n} + {}^{235}_{92}\text{U} \rightarrow {}^{236}_{92}\text{U}^{*} \rightarrow {}^{141}_{56}\text{Ba} + {}^{92}_{36}\text{Kr} + 3\,{}^{1}_{0}\text{n} + \text{energy}

The star on ²³⁶U means it is in an excited state. It wobbles like a drop of water and breaks apart. The split is not always the same. Other common pairs:

01n+92235U→54140Xe+3894Sr+2 01n{}^{1}_{0}\text{n} + {}^{235}_{92}\text{U} \rightarrow {}^{140}_{54}\text{Xe} + {}^{94}_{38}\text{Sr} + 2\,{}^{1}_{0}\text{n}

Check any fission equation by balancing Z and A. For the first one: Z: 0 + 92 = 56 + 36 + 0. A: 1 + 235 = 141 + 92 + 3.

Key facts:

  • Slow (thermal) neutrons, with energy about 0.025 eV, cause fission in ²³⁵U far more easily than fast ones. ²³⁸U, the common isotope (99.3% of natural uranium), needs fast neutrons and mostly just absorbs slow ones.

  • On average about 2.5 neutrons are released per fission.

  • About 200 MeV is released per fission. Most of it (about 170 MeV) is the kinetic energy of the two fragments, which becomes heat. The rest comes as neutrons, gamma rays and later decays of the fragments.

Figure 7.1 · Fission of uranium-235 and fusion of deuterium with tritium
Figure 7.1 · Fission of uranium-235 and fusion of deuterium with tritium

In fission one slow neutron goes in and three come out, which is what makes a chain reaction possible; in fusion the two nuclei must first be forced together by heat.

Why 200 MeV? A check from the BE/A curve. ²³⁶U has BE/A about 7.6 MeV. The fragments have about 8.5 MeV. So 236 nucleons each gain about 0.9 MeV: 236 × 0.9 ≈ 212 MeV. That matches roughly. From masses, the Ba–Kr split above releases 173 MeV directly; the later decays of the fragments add the rest.

7.2 Chain reaction

Each fission gives 2 or 3 neutrons. Each of those can cause another fission. One fission becomes two or three, then four to nine, and so on. This is a chain reaction. Think of a rumour in a school WhatsApp group: each person forwards it to a few more, and soon everyone has it.

Not every neutron causes fission. Some escape from the surface. Some are absorbed by ²³⁸U or other material. Define the multiplication factor:

k=number of neutrons in one generationnumber in the previous generationk = \frac{\text{number of neutrons in one generation}}{\text{number in the previous generation}}
kNameWhat happensUsed in
less than 1SubcriticalReaction dies outReactor being shut down
exactly 1CriticalSteady rate, steady powerNuclear reactor running
greater than 1SupercriticalRate grows quicklyAtom bomb (uncontrolled)

After n generations the neutron number is multiplied by kⁿ. A generation in a bomb takes about 10⁻⁸ s, so even k = 2 gives an enormous release in under a microsecond.

Neutrons escape through the surface, while fissions happen through the volume. A small lump has too much surface for its volume, so too many neutrons are lost. The smallest mass that can sustain a chain reaction is the critical mass. It depends on the shape, the purity and what surrounds the fuel.

7.3 The nuclear reactor

A reactor keeps k exactly at 1, so fission energy comes out steadily as heat. The heat makes steam, the steam turns a turbine, the turbine runs a generator.

Figure 7.2 · A growing chain reaction and the main parts of a reactor
Figure 7.2 · A growing chain reaction and the main parts of a reactor

Left, with k = 2 the number of fissions doubles each generation; right, the control rods soak up just enough neutrons to hold k at 1 while the coolant carries the heat out to make steam.

PartMaterialJob
FuelNatural or enriched uranium (about 3% ²³⁵U), as rodsUndergoes fission
ModeratorHeavy water (D₂O), ordinary water, or graphiteSlows fast neutrons (about 2 MeV) to thermal speeds
Control rodsCadmium or boronAbsorb neutrons; pushed in to lower k, pulled out to raise it
CoolantWater, heavy water, liquid sodium, or CO₂ gasCarries heat away to make steam
ShieldingThick concrete and steelStops neutrons and gamma rays

How a moderator works. A neutron loses the most energy when it hits something of about its own mass, like a carrom striker hitting another striker. Hitting a heavy nucleus is like a carrom striker bouncing off the board edge: it keeps its speed. Hydrogen and deuterium are light, so water and heavy water are good moderators. Heavy water has the extra advantage of absorbing very few neutrons, so reactors can run on natural uranium.

India's first nuclear power station, at Tarapur, began operating in 1969. Most Indian reactors are pressurised heavy water reactors that use natural uranium. India also plans to use its large thorium reserves, by turning thorium into the fissile isotope ²³³U inside reactors.

The main problem with fission power is waste. The fragments are highly radioactive and must be stored safely for a very long time.

7.4 Nuclear fusion

In fusion, two light nuclei join to form a heavier one. Since light nuclei sit on the steep rising part of the BE/A curve, the product is far more tightly bound, and energy is released.

12H+12H→23He+01n+3.27 MeV{}^{2}_{1}\text{H} + {}^{2}_{1}\text{H} \rightarrow {}^{3}_{2}\text{He} + {}^{1}_{0}\text{n} + 3.27\ \text{MeV}
12H+13H→24He+01n+17.6 MeV{}^{2}_{1}\text{H} + {}^{3}_{1}\text{H} \rightarrow {}^{4}_{2}\text{He} + {}^{1}_{0}\text{n} + 17.6\ \text{MeV}

The hard part: Coulomb repulsion. Both nuclei are positive. To fuse, they must come within a few femtometres, where the nuclear force takes over. For two deuterons 3 fm apart, the Coulomb energy is 1.44/3 = 0.48 MeV. The nuclei must arrive with enough kinetic energy to climb this hill.

The only practical way is to make the gas extremely hot, so the nuclei move very fast. That is why fusion is also called a thermonuclear reaction. A naive estimate, (3/2)kT = 0.48 MeV, gives T of about 4 × 10⁹ K. In fact fusion happens at about 10⁷ to 10⁸ K, for two reasons: some nuclei move much faster than average, and quantum tunnelling lets nuclei pass through the hill without going over it.

At such temperatures, matter is a plasma: bare nuclei and free electrons. No solid container can hold it. Experimental reactors (tokamaks) hold the plasma with strong magnetic fields. Controlled fusion that gives more power than it uses, steadily, is still a research goal. The hydrogen bomb is uncontrolled fusion, triggered by a fission bomb that supplies the heat.

7.5 Energy in stars

The Sun's core is at about 1.5 × 10⁷ K. There, hydrogen fuses into helium through a chain of steps called the proton–proton cycle. The net result:

4 11H→24He+2e++2ν+26.7 MeV4\,{}^{1}_{1}\text{H} \rightarrow {}^{4}_{2}\text{He} + 2e^{+} + 2\nu + 26.7\ \text{MeV}

(The 26.7 MeV includes the energy from the two positrons meeting electrons. You can check it from atomic masses: 4 × 1.007825 − 4.002603 = 0.028697 u, times 931.5 = 26.7 MeV.)

The Sun converts about 6 × 10¹¹ kg of hydrogen into helium every second, and has been doing so for about 4.6 billion years. It has enough hydrogen in its core for roughly another 5 billion years. In bigger, hotter stars, helium then fuses into carbon and oxygen, and so on up to iron. Beyond iron, fusion no longer releases energy (Chapter 6).

The sunlight that dries clothes on a Mumbai terrace began as fusion in the Sun's core.

7.6 Fission versus fusion

FeatureFissionFusion
What happensHeavy nucleus splitsLight nuclei combine
Typical fuel²³⁵U, ²³⁹Pu²H, ³H
Energy per eventAbout 200 MeV3 to 18 MeV
Energy per kg of fuelAbout 8 × 10¹³ JAbout 3 × 10¹⁴ J (D–T), about 4 times more
TriggerA slow neutronVery high temperature (10⁷ to 10⁸ K)
Control on EarthAchieved (reactors)Not yet achieved for steady power
WasteHighly radioactive fragmentsMostly helium; much less waste
Natural exampleRareStars

Worked examples

Worked example 7.1: Find x and identify the missing particles: ¹n + ²³⁵U → ¹⁴⁰Xe + ⁹⁴Sr + x ¹n.

Solution: A: 1 + 235 = 140 + 94 + x, so x = 2. Z: 92 = 54 + 38 + 0, which checks. Two neutrons are released.

Worked example 7.2: Find the energy released directly in ¹n + ²³⁵U → ¹⁴¹Ba + ⁹²Kr + 3¹n. Atomic masses: ²³⁵U 235.043930 u, ¹⁴¹Ba 140.914411 u, ⁹²Kr 91.926156 u, n 1.008665 u.

Solution: Left: 235.043930 + 1.008665 = 236.052595 u. Right: 140.914411 + 91.926156 + 3(1.008665) = 235.866562 u. Δm = 0.186033 u. Q = 0.186033 × 931.5 = 173 MeV.

Worked example 7.3: How much energy is released by the complete fission of 1 kg of ²³⁵U, at 200 MeV per fission? How much coal (3 × 10⁷ J/kg) gives the same energy?

Solution: Number of nuclei = (1000/235) × 6.022 × 10²³ = 2.56 × 10²⁴. Energy = 2.56 × 10²⁴ × 200 × 1.6 × 10⁻¹³ = 8.2 × 10¹³ J. Coal needed = 8.2 × 10¹³/(3 × 10⁷) = 2.7 × 10⁶ kg, about 2700 tonnes. That is a whole goods train of coal for one kilogram of uranium-235.

Worked example 7.4: A reactor produces 1000 MW of heat. At 200 MeV per fission, find the fissions per second and the mass of ²³⁵U used per day.

Solution: Energy per fission = 200 × 1.6 × 10⁻¹³ = 3.2 × 10⁻¹¹ J. Fissions per second = 10⁹/(3.2 × 10⁻¹¹) = 3.1 × 10¹⁹. Per day: 3.125 × 10¹⁹ × 86,400 = 2.7 × 10²⁴ nuclei. Mass = (2.7 × 10²⁴/6.022 × 10²³) × 235 g = 1.05 kg per day.

Worked example 7.5: In a reactor k = 1.1. By what factor does the neutron population grow in 10 generations?

Solution: 1.1¹⁰ = 2.59. The population grows about 2.6 times. Even a k just above 1 grows fast if generations are short, which is why control rods must respond quickly.

Worked example 7.6: A 2 MeV neutron collides head-on and elastically with a carbon-12 nucleus at rest. What fraction of its kinetic energy does it lose? Why is hydrogen better?

Solution: For a head-on elastic collision of mass m with mass M at rest, the incoming particle keeps the fraction [(M − m)/(M + m)]² of its kinetic energy. For carbon: (11/13)² = 0.716. So it loses about 28%. For hydrogen (M = m) the fraction kept is zero: it can lose all its energy in one collision.

Worked example 7.7: Estimate the Coulomb energy of two deuterons 3 fm apart, and the temperature at which the average thermal energy (3/2)kT equals it. Why does fusion actually occur at much lower temperatures?

Solution: U = 1.44 MeV fm/3 fm = 0.48 MeV = 7.7 × 10⁻¹⁴ J. T = 2U/(3k) = 2 × 7.7 × 10⁻¹⁴/(3 × 1.38 × 10⁻²³) = 3.7 × 10⁹ K. Fusion starts near 10⁷ K because the fastest nuclei in the gas have many times the average energy, and quantum tunnelling lets them pass the barrier with less energy.

Worked example 7.8: The Sun radiates 3.8 × 10²⁶ W. Each conversion of 4 ¹H to ⁴He releases 26.7 MeV. Find the mass of hydrogen used per second (mass of ¹H = 1.67 × 10⁻²⁷ kg).

Solution: Energy per cycle = 26.7 × 1.6 × 10⁻¹³ = 4.27 × 10⁻¹² J. Cycles per second = 3.8 × 10²⁶/4.27 × 10⁻¹² = 8.9 × 10³⁷. Hydrogen used = 4 × 8.9 × 10³⁷ × 1.67 × 10⁻²⁷ = 5.9 × 10¹¹ kg per second, about 600 million tonnes.

Quick revision

  • Fission: n + ²³⁵U → two medium nuclei + 2 or 3 neutrons + about 200 MeV.

  • Slow neutrons cause ²³⁵U fission; about 2.5 neutrons per fission.

  • k less than 1: dies out; k = 1: steady (reactor); k greater than 1: grows (bomb).

  • Reactor: fuel, moderator (D₂O, H₂O, graphite), control rods (Cd, B), coolant, shielding.

  • Fusion: light nuclei join; needs 10⁷ to 10⁸ K to beat Coulomb repulsion. D–T gives 17.6 MeV.

  • Sun: 4 ¹H → ⁴He + 2e⁺ + 2ν + 26.7 MeV, core about 1.5 × 10⁷ K.

  • Fission gives more energy per event; fusion gives more per kilogram of fuel.

NEET traps

  • Thinking fast neutrons are best for ²³⁵U. Slow neutrons are, which is why reactors need a moderator.

  • Mixing up moderator and control rods. Moderator slows neutrons; control rods absorb them.

  • Saying fusion releases more energy per reaction than fission. Per reaction, fission wins; per kilogram, fusion wins.

  • Forgetting neutrons when balancing A in a fission equation.

  • Saying a reactor runs with k greater than 1. A steady reactor has k = 1.

  • Thinking the high temperature in fusion is needed to break bonds. It is needed to beat Coulomb repulsion.

Practice MCQs: Chapter 7

Level 1: Concept check

1. Fission of ²³⁵U is most easily caused by (a) fast neutrons of about 2 MeV (b) protons (c) slow (thermal) neutrons (d) alpha particles

2. The energy released in one fission of ²³⁵U is about (a) 200 MeV (b) 20 MeV (c) 2 MeV (d) 2000 MeV

3. The job of the moderator in a nuclear reactor is to (a) absorb neutrons (b) cool the reactor (c) shield the workers (d) slow down fast neutrons

4. Control rods in a reactor are made of (a) graphite (b) cadmium or boron (c) heavy water (d) uranium

5. The main source of the Sun's energy is (a) fission of heavy nuclei (b) chemical burning (c) fusion of hydrogen into helium (d) gravitational collapse alone

6. Fusion needs a very high temperature mainly because (a) the atoms must be ionised (b) neutrons must be slowed down (c) chemical bonds must break (d) the nuclei must overcome their Coulomb repulsion

7. For a reactor to run at steady power, the multiplication factor k must be (a) exactly 1 (b) less than 1 (c) greater than 1 (d) zero

8. The average number of neutrons released per fission of ²³⁵U is about (a) 1 (b) 2.5 (c) 10 (d) 0.5

9. Which of these is NOT used as a moderator? (a) Heavy water (b) Graphite (c) Ordinary water (d) Cadmium

10. An atom bomb works on (a) controlled fission (b) controlled fusion (c) an uncontrolled fission chain reaction (d) a chemical explosion

Level 2: NEET standard

11. In ¹n + ²³⁵₉₂U → ¹⁴¹₅₆Ba + ⁹²₃₆Kr + x ¹n, the value of x is (a) 2 (b) 3 (c) 4 (d) 1

12. In ¹n + ²³⁵₉₂U → ¹⁴⁰₅₄Xe + ⁹⁴₃₈Sr + x ¹n, the value of x is (a) 3 (b) 1 (c) 4 (d) 2

13. At 200 MeV per fission, the energy from complete fission of 1 kg of ²³⁵U is about (a) 8.2 × 10¹³ J (b) 8.2 × 10¹⁰ J (c) 5.1 × 10²⁶ J (d) 3.2 × 10⁻¹¹ J

14. A reactor produces 1000 MW of heat at 200 MeV per fission. The number of fissions per second is about (a) 3.1 × 10¹⁶ (b) 5 × 10²⁷ (c) 3.1 × 10¹⁹ (d) 6.2 × 10²¹

15. With k = 1.1, the neutron population after 10 generations is multiplied by about (a) 11 (b) 2.6 (c) 1.1 (d) 110

16. Fast neutrons are slowed down most effectively by elastic collisions with nuclei whose mass is (a) close to the neutron's mass (b) very large (c) zero (d) much larger and highly charged

17. The energy released in the Sun for each helium nucleus formed by the proton–proton cycle is about (a) 2.22 MeV (b) 17.6 MeV (c) 200 MeV (d) 26.7 MeV

18. Atomic masses: ²³⁵U 235.043930 u, ¹⁴¹Ba 140.914411 u, ⁹²Kr 91.926156 u, n 1.008665 u. The energy released directly in n + ²³⁵U → ¹⁴¹Ba + ⁹²Kr + 3n is about (a) 200 MeV (b) 931 MeV (c) 173 MeV (d) 17.3 MeV

19. The critical mass of a fissile material is (a) the mass of one uranium nucleus (b) the least mass in which a chain reaction can sustain itself (c) the mass of the control rods (d) the mass converted to energy per second

20. Which of these is a fusion reaction? (a) ²³⁵U + n → ¹⁴¹Ba + ⁹²Kr + 3n (b) ²³⁹Pu + n → two fragments + neutrons (c) ⁵⁶Fe → two nuclei of A = 28 (d) ²H + ³H → ⁴He + n

21. Compared with ²³⁵U fission, D–T fusion releases per kilogram of fuel (a) about 4 times more energy (b) about 11 times less energy (c) the same energy (d) about 100 times more energy

22. The temperature at the centre of the Sun is about (a) 6000 K (b) 10⁴ K (c) 1.5 × 10⁷ K (d) 10¹² K

Level 3: Challenge

23. A reactor produces 1000 MW of heat at 200 MeV per fission. The mass of ²³⁵U used per day is about (a) 1.05 g (b) 10.5 kg (c) 105 kg (d) 1.05 kg

24. Taking e²/(4πε₀) = 1.44 MeV fm, the Coulomb energy of two deuterons 3 fm apart is (a) 4.8 MeV (b) 0.48 MeV (c) 0.048 MeV (d) 1.44 MeV

25. A neutron collides head-on and elastically with a carbon-12 nucleus at rest. The fraction of its kinetic energy it loses is about (a) 28% (b) 100% (c) 72% (d) 8%

26. The Sun radiates 3.8 × 10²⁶ W and each conversion of 4 ¹H into ⁴He releases 26.7 MeV. The mass of hydrogen used per second is about (a) 4.2 × 10⁹ kg (b) 6 × 10⁸ kg (c) 6 × 10¹¹ kg (d) 6 × 10¹⁴ kg

27. In a running reactor, all control rods are suddenly pulled out. Then (a) k becomes zero (b) the reactor stops (c) k stays equal to 1 (d) k rises above 1 and the power rises quickly

28. Which statement comparing fission and fusion is correct? (a) Fusion releases more energy per reaction than fission (b) Fusion releases more energy per kilogram of fuel than fission (c) Fission needs temperatures of about 10⁷ K (d) Fusion products are as radioactive as fission fragments

29. Assertion (A): Heavy water is used as the moderator in reactors that run on natural uranium. Reason (R): Deuterium is light, so neutrons lose much energy per collision, and heavy water absorbs very few neutrons. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: An uncontrolled chain reaction with k greater than 1 can lead to an explosion. Statement II: Ordinary water is a better moderator than heavy water because ordinary hydrogen absorbs no neutrons. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cThermal neutrons are captured readily by ²³⁵U
2aAbout 200 MeV per fission
3dThermal neutrons cause fission best
4bStrong neutron absorbers
5cProton–proton cycle
6dBoth nuclei are positive
7aEach generation equals the last
8bAverage of 2 and 3
9dCadmium absorbs neutrons
10ck greater than 1, no control
11b236 = 141 + 92 + x
12d236 = 140 + 94 + x
13a2.56 × 10²⁴ × 3.2 × 10⁻¹¹ J
14c10⁹/(3.2 × 10⁻¹¹)
15b1.1¹⁰ = 2.59
16aEqual masses share energy best
17d0.028697 u × 931.5
18cΔm = 0.186033 u
19bDefinition of critical mass
20dTwo light nuclei join
21a3.4 × 10¹⁴ versus 8.2 × 10¹³ J/kg
22cCore temperature about 15 million K
23d2.7 × 10²⁴ nuclei per day × 235 g/mol
24b1.44/3 = 0.48 MeV
25aKept: (11/13)² = 0.716
26c4 × 8.9 × 10³⁷ × 1.67 × 10⁻²⁷ kg
27dFewer neutrons absorbed, so k rises
28b3.5 versus 0.85 MeV per nucleon
29aLight and a poor absorber
30cOrdinary hydrogen does absorb neutrons

Chapter 7 revision sheet

One-page summary

  • Fission: a heavy nucleus splits into two middle-mass nuclei plus a few neutrons, releasing energy.

  • Example: ²³⁵U + n → ¹⁴¹Ba + ⁹²Kr + 3n, releasing about 200 MeV.

  • Most of the fission energy appears as kinetic energy of the fragments; the fragments are neutron-rich.

  • U-235 fissions best with slow (thermal) neutrons.

  • Chain reaction: neutrons from one fission cause further fissions. Multiplication factor k = neutrons in one generation / neutrons in the previous one.

  • k < 1: subcritical, dies out. k = 1: critical, steady (reactor). k > 1: supercritical, grows (bomb).

  • Critical mass: the smallest mass, for a given shape, that keeps a chain reaction going.

  • Reactor parts: fuel (enriched U), moderator (heavy water, graphite or ordinary water) to slow neutrons, control rods (cadmium, boron) to absorb neutrons, coolant (water, liquid sodium) to carry heat, shielding.

  • Fusion: light nuclei join into a heavier nucleus, releasing energy.

  • D–T fusion: ²H + ³H → ⁴He + n + 17.6 MeV (the neutron carries about 14.1 MeV).

  • Fusion needs temperatures of about 10⁷ to 10⁸ K so nuclei can get close despite Coulomb repulsion (thermonuclear).

  • The Sun turns four protons into one ⁴He nucleus, releasing about 26.7 MeV per helium.

  • Per nucleon, fusion releases more energy than fission (about 3.5 MeV against 0.85 MeV).

Must-remember table

ItemValue or materialNote
Energy per U-235 fissionAbout 200 MeV3.2 × 10⁻¹¹ J
Neutrons per fissionAbout 2.5 on average2 or 3 in a given event
ModeratorHeavy water, graphite, waterSlows neutrons
Control rodsCadmium, boronAbsorb neutrons
CoolantWater, liquid sodiumRemoves heat
D–T fusion17.6 MeVNeutron takes 14.1 MeV
4 ¹H → ⁴He26.7 MeVSun's energy source
Fusion temperature10⁷ to 10⁸ KOvercome Coulomb barrier

Memory aids

  • "FMCC" for reactor parts: Fuel, Moderator, Control rods, Coolant, in the order neutrons meet them.

  • "Mod slows, Rod stops": the moderator slows neutrons; control rods absorb them.

  • "k = 1 is the job": a power reactor runs at k = 1; a bomb needs k well above 1.

  • "200 for split, 17.6 for join": energy per fission and per D–T fusion.

  • "Hot to fuse": fusion is called thermonuclear because only very high temperature brings nuclei close enough.

Concept connections

  • Neutron slowing in the moderator is elastic collision, from Physics Book 4: Work, Energy and Power.

  • Very high temperatures and fast particles in fusion link to Physics Book 9: Kinetic Theory of Gases.

  • Coolant heat transfer and power output in a reactor use ideas from Physics Book 8: Thermodynamics.

Practice MCQs: Chapter 7, Level 4 (new NEET pattern)

31. Match each reactor part (List I) with its material and job (List II).

List I:

  • A. Moderator

  • B. Control rods

  • C. Coolant

  • D. Fuel

List II:

  • i. Cadmium or boron; absorb neutrons

  • ii. Enriched uranium; undergoes fission

  • iii. Heavy water or graphite; slows neutrons

  • iv. Water or liquid sodium; carries away heat

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-i, D-ii

32. Match List I with List II.

List I:

  • A. Subcritical

  • B. Critical

  • C. Supercritical

  • D. Critical mass

List II:

  • i. k = 1, steady reaction

  • ii. Smallest mass that sustains a chain reaction

  • iii. k > 1, reaction grows

  • iv. k < 1, reaction dies out

(a) A-iv, B-i, C-iii, D-ii (b) A-i, B-iv, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-i, C-ii, D-iii

33. Match each process (List I) with the energy it releases (List II).

List I:

  • A. Fission of one ²³⁵U nucleus

  • B. ²H + ³H → ⁴He + n

  • C. ²H + ²H → ⁴He

  • D. 4 ¹H → ⁴He (Sun)

List II:

  • i. 26.7 MeV

  • ii. 17.6 MeV

  • iii. About 200 MeV

  • iv. 23.8 MeV

(a) A-iii, B-iv, C-ii, D-i (b) A-i, B-ii, C-iv, D-iii (c) A-iii, B-ii, C-i, D-iv (d) A-iii, B-ii, C-iv, D-i

34. Match each reaction (List I) with the particle that balances it (List II).

List I:

  • A. ²³⁵U + n → ¹⁴¹Ba + ⁹²Kr + ?

  • B. ²H + ³H → ⁴He + ?

  • C. ²H + ²H → ³H + ?

  • D. ⁶Li + n → ³H + ?

List II:

  • i. n

  • ii. 3n

  • iii. ⁴He

  • iv. ¹H

(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-i, C-iii, D-iv (d) A-ii, B-iv, C-i, D-iii

35. How many of the following statements are correct?

  • A. The moderator slows neutrons, and slow neutrons are more likely to cause fission in U-235.

  • B. Pushing control rods deeper into the core increases the reaction rate.

  • C. Fusion needs very high temperature so that nuclei can overcome their Coulomb repulsion.

  • D. Energy released per nucleon in D–T fusion is greater than in U-235 fission.

  • E. Heavy water is a good moderator because deuterium is light and absorbs few neutrons.

(a) 4 (b) 3 (c) 5 (d) 2

36. Choose the correct set of statements.

  • A. An atom bomb is an uncontrolled fission chain reaction.

  • B. A hydrogen bomb uses fusion that is set off by a fission explosion.

  • C. Present commercial nuclear power stations run on fusion.

  • D. The Sun's energy comes from fusion of hydrogen into helium.

(a) A and B only (b) B, C and D only (c) A, B and D only (d) A, B, C and D

37. Which statements are correct?

  • A. Fission fragments are neutron-rich.

  • B. Most of the fission energy appears as kinetic energy of the fragments.

  • C. In D–T fusion, the neutron carries most of the 17.6 MeV.

  • D. Critical mass does not depend on the shape of the fuel.

(a) A and B only (b) C and D only (c) A, B, C and D (d) A, B and C only

38. How many of these statements are correct?

  • A. Graphite can act as a moderator.

  • B. Cadmium is a strong absorber of neutrons.

  • C. Ordinary water cannot be used as a moderator.

  • D. A chain reaction needs each fission to release, on average, more than one neutron.

  • E. Fusion becomes easier as the nuclei get heavier.

(a) 2 (b) 3 (c) 4 (d) 5

39. A table shows the number of neutrons in successive generations inside a fuel assembly.

GenerationNeutrons
11000
21100
31210
41331

The multiplication factor and the state of the assembly are:

(a) 1.1, supercritical (b) 1.0, critical (c) 0.9, subcritical (d) 1.1, subcritical

40. A graph of reactor power (y-axis) against time (x-axis) is flat for the first hour. After an operator pulls out some control rods, the curve starts to rise faster and faster. After the change, the reactor is:

(a) Critical, k = 1 (b) Subcritical, k < 1 (c) Supercritical, k > 1 (d) Shut down

41. A table lists four nuclear processes.

ProcessEnergy releasedNucleons in reactants
²³⁵U + n fission200 MeV236
²H + ³H fusion17.6 MeV5
⁶Li + n → ³H + ⁴He4.8 MeV7
4 ¹H → ⁴He26.7 MeV4

Which process releases the most energy per nucleon?

(a) U-235 fission (b) D–T fusion (c) ⁶Li + n (d) 4 ¹H → ⁴He

Passage for Q42–43. A nuclear power reactor produces 400 MW of heat. Each fission of U-235 releases 200 MeV. Take 1 MeV = 1.6 × 10⁻¹³ J, Avogadro's number = 6.02 × 10²³ per mole and the molar mass of U-235 = 235 g.

42. The number of fissions per second is:

(a) 1.25 × 10²¹ (b) 1.25 × 10¹⁹ (c) 2.0 × 10¹⁸ (d) 6.25 × 10¹⁸

43. The mass of U-235 used up in one day is about:

(a) 0.42 kg (b) 4.2 kg (c) 42 g (d) 1.1 kg

44. In D–T fusion, 17.6 MeV is released for every 5 u of fuel. The energy released per kilogram of D–T fuel is about (1 u = 1.66 × 10⁻²⁷ kg):

(a) 3.4 × 10¹¹ J (b) 1.7 × 10¹⁴ J (c) 3.4 × 10¹⁴ J (d) 8.2 × 10¹³ J

45. In the fission of U-235 (200 MeV released, 236 u of reactants, 1 u = 931.5 MeV), the fraction of the rest mass turned into energy is about:

(a) 0.9% (b) 0.09% (c) 9% (d) 0.009%

Level 4 answer key

QAnsReason
31cModerator slows, rods absorb, coolant carries heat, fuel fissions
32ak < 1 dies out, k = 1 steady, k > 1 grows; critical mass is the minimum
33dStandard values: 200, 17.6, 23.8, 26.7 MeV
34bBalance A and Z: 236 = 141 + 92 + 3; 5 = 4 + 1; 4 = 3 + 1 (Z = 1); 7 = 3 + 4 (Z = 2)
35aOnly B is false: control rods absorb neutrons and slow the reaction
36cPower stations today use fission, not fusion
37dShape matters: a sphere loses the fewest neutrons, so it has the smallest critical mass
38bC is false (ordinary water is a common moderator); E is false (more charge, more repulsion)
39a1100/1000 = 1210/1100 = 1.1, which is greater than 1
40cPower rising faster and faster means the neutron number grows each generation
41dPer nucleon: 0.85, 3.52, 0.69, 6.68 MeV
42b200 MeV = 3.2 × 10⁻¹¹ J; 4 × 10⁸/3.2 × 10⁻¹¹ = 1.25 × 10¹⁹ per second
43a1.25 × 10¹⁹ × 86400 = 1.08 × 10²⁴ nuclei = 1.79 mol; × 235 g = 421 g
44c17.6 × 1.6 × 10⁻¹³/(5 × 1.66 × 10⁻²⁷) = 3.4 × 10¹⁴ J/kg
45b200/(236 × 931.5) = 9.1 × 10⁻⁴, about 0.09%
26 min left
‹
›
Chapter 7: Nuclear | NEET Physics Book 18: Atoms and Nuclei