Chapter 6: Binding Energy per Nucleon
What you will learn
Why binding energy per nucleon, not total binding energy, measures stability.
The shape of the BE/A versus A curve and the key values on it.
How saturation, surface nucleons and Coulomb repulsion explain that shape.
Why both fission of heavy nuclei and fusion of light nuclei release energy.
How to find the energy released from BE/A values.
6.1 Binding energy per nucleon
Total binding energy grows with size. ²³⁸U has a binding energy of about 1802 MeV; ⁴He has only 28.3 MeV. But that does not make uranium more stable. It just has more nucleons.
A fair comparison divides by the number of nucleons:
This is the average energy needed to pull one nucleon out of the nucleus. The higher the BE/A, the more tightly each nucleon is held, and the more stable the nucleus. Compare two cricket teams by runs per player, not total runs, if one team has 11 players and the other 15.
| Nucleus | A | Total BE (MeV) | BE/A (MeV) |
|---|---|---|---|
| ²H | 2 | 2.22 | 1.11 |
| ³He | 3 | 7.72 | 2.57 |
| ⁴He | 4 | 28.3 | 7.07 |
| ⁶Li | 6 | 32.0 | 5.33 |
| ⁷Li | 7 | 39.2 | 5.61 |
| ¹²C | 12 | 92.2 | 7.68 |
| ¹⁶O | 16 | 127.6 | 7.98 |
| ⁵⁶Fe | 56 | 492.3 | 8.79 |
| ⁶²Ni | 62 | 545.3 | 8.79 |
| ²³⁵U | 235 | 1784 | 7.59 |
| ²³⁸U | 238 | 1802 | 7.57 |
6.2 The BE/A curve
Plot BE/A against A for all stable nuclei. You get one of the most important graphs in physics.

The curve climbs steeply up to about A = 20, peaks near 8.8 MeV at iron, then falls slowly to about 7.6 MeV at uranium; both arrows point uphill, towards more tightly bound nuclei.
Read the curve in four parts.
Light nuclei (A below about 20). BE/A rises steeply, from 1.1 MeV for ²H. The curve is jagged. ⁴He, ¹²C and ¹⁶O stand out as peaks. They are made of whole alpha-particle units, and ⁴He in particular is extra tightly bound (7.07 MeV) compared with its neighbours ³He and ⁶Li.
Middle range (about 30 to 170). BE/A is almost flat, about 8.0 to 8.8 MeV. A rough NEET value is 8 to 8.5 MeV.
The peak. The maximum, about 8.8 MeV, is around A = 56 to 62 (iron and nickel). These are the most tightly bound nuclei in nature.
Heavy nuclei (A above about 170). BE/A falls slowly, to about 7.6 MeV for uranium.
6.3 Why the curve has this shape
Flat middle: saturation. The nuclear force is short range. Each nucleon interacts only with its near neighbours, about the same number in any big nucleus. Adding more nucleons does not add more bonds per nucleon. So BE/A stays about the same. If every nucleon attracted every other one, BE/A would keep rising with A. It does not.
Low values for light nuclei: surface effect. A nucleon at the surface has neighbours on one side only. It is less tightly bound. In a small nucleus, a large fraction of nucleons are on the surface. Think of a group of students sitting in a circle: those in the middle of a big crowd have friends all around, while in a group of four everyone is on the edge.
Fall for heavy nuclei: Coulomb repulsion. Each proton repels every other proton, not just its neighbours, because the Coulomb force is long range. As Z grows, this repulsion grows roughly as Z², while the nuclear attraction grows only as A. The repulsion eats into the binding, so BE/A drops.
The peak near iron is where these effects balance best.
6.4 Energy from moving towards the peak
Any process that moves nucleons from a lower BE/A to a higher BE/A releases energy. The same nucleons end up more tightly bound, and the difference comes out.
Fission. Split a heavy nucleus (BE/A about 7.6 MeV) into two medium nuclei (about 8.5 MeV). Each nucleon gains about 0.9 MeV.
Fusion. Join two very light nuclei (low BE/A) into a heavier light nucleus such as ⁴He (7.07 MeV). Each nucleon gains several MeV.
Nucleon number does not change in either case. So the energy released is:
By the same logic, splitting an iron nucleus, or fusing two iron nuclei, would absorb energy. That is why iron is the end of the line in stars: once a star's core turns to iron, fusion no longer pays.
Free neutrons in a reaction have zero binding energy. Count them in A but add nothing to the BE sum.
6.5 Separation energy (a NEET-hard extension)
BE/A is an average. The energy to remove one particular nucleon, the separation energy, can differ. For a neutron:
For ¹³C: S_n = (12.000000 + 1.008665 − 13.003355) × 931.5 = 4.95 MeV, well below ¹³C's average of 7.47 MeV. The extra neutron is loosely held.
Worked examples
Worked example 6.1: The binding energy of ⁴He is 28.3 MeV and of ²H is 2.22 MeV. Find BE/A for each. Which is more stable?
Solution: ⁴He: 28.3/4 = 7.07 MeV. ²H: 2.22/2 = 1.11 MeV. ⁴He is far more stable, since each nucleon is bound about six times more tightly.
Worked example 6.2: Find BE/A for ⁵⁶Fe (atomic mass 55.934937 u). Use m_H = 1.007825 u, m_n = 1.008665 u.
Solution: Δm = 26(1.007825) + 30(1.008665) − 55.934937 = 26.203450 + 30.259950 − 55.934937 = 0.528463 u. E_b = 0.528463 × 931.5 = 492.3 MeV. BE/A = 492.3/56 = 8.79 MeV.
Worked example 6.3: A nucleus with A = 240 and BE/A = 7.6 MeV splits into two equal fragments, each with BE/A = 8.5 MeV. Find the energy released.
Solution: Initial BE = 240 × 7.6 = 1824 MeV. Final BE = 2 × 120 × 8.5 = 2040 MeV. Q = 2040 − 1824 = 216 MeV. Shortcut: 240 × (8.5 − 7.6) = 216 MeV.
Worked example 6.4: Two deuterons (BE/A = 1.11 MeV) fuse to form ⁴He (BE/A = 7.07 MeV). Find the energy released.
Solution: Initial BE = 2 × 2 × 1.11 = 4.44 MeV. Final BE = 4 × 7.07 = 28.28 MeV. Q = 28.28 − 4.44 = 23.8 MeV. (Chapter 5 got 23.8 MeV from masses, as it should.)
Worked example 6.5: A nucleus X (A = 180, BE/A = 8.0 MeV) splits into Y (A = 110, BE/A = 8.4 MeV) and Z (A = 70, BE/A = 8.5 MeV). Find Q.
Solution: Products: 110 × 8.4 + 70 × 8.5 = 924 + 595 = 1519 MeV. Reactant: 180 × 8.0 = 1440 MeV. Q = 79 MeV.
Worked example 6.6: Find the neutron separation energy of ¹³C. Masses: ¹²C 12.000000 u, ¹³C 13.003355 u, n 1.008665 u.
Solution: Mass after removal = 12.000000 + 1.008665 = 13.008665 u. Excess over ¹³C = 0.005310 u. S_n = 0.005310 × 931.5 = 4.95 MeV.
Worked example 6.7: Find the energy released per nucleon of fuel in (a) D–T fusion, which releases 17.6 MeV, and (b) fission of ²³⁵U, which releases about 200 MeV. Compare.
Solution: (a) Fuel nucleons = 2 + 3 = 5. 17.6/5 = 3.5 MeV per nucleon. (b) Fuel nucleons = 235 + 1 (the neutron that triggers it) = 236. 200/236 = 0.85 MeV per nucleon. Fusion gives about 4 times more energy per unit mass of fuel, though each fission event gives more energy.
Quick revision
BE/A = E_b/A measures stability; higher means more stable.
Key values: ²H 1.1, ⁴He 7.07, ¹²C 7.68, ¹⁶O 7.98, ⁵⁶Fe 8.79, ²³⁸U 7.57 MeV.
Peak about 8.8 MeV near A = 56 to 62; flat about 8 to 8.8 MeV for A from 30 to 170.
Flat middle: saturation. Low start: surface effect. Fall for heavy: Coulomb repulsion.
Fission and fusion both release energy by moving towards the peak.
Q = (total BE of products) − (total BE of reactants).
NEET traps
Judging stability by total binding energy. Use BE/A.
Adding binding energy for free neutrons. A free nucleon has zero BE.
Thinking any fusion releases energy. Fusing nuclei past the iron peak absorbs energy.
Mixing up the causes: saturation explains the flat part, Coulomb repulsion explains the fall, the surface effect explains the low start.
Writing the peak at A = 238. That is where BE/A is lowest among heavy stable nuclei; the peak is at iron.
Practice MCQs: Chapter 6
Level 1: Concept check
1. The binding energy per nucleon is largest for nuclei with mass number around (a) 4 (b) 56 (c) 120 (d) 238
2. The maximum value of binding energy per nucleon is about (a) 7.6 MeV (b) 1.1 MeV (c) 13.6 eV (d) 8.8 MeV
3. A nucleus with a higher binding energy per nucleon is (a) more stable (b) less stable (c) always fissile (d) always heavier
4. For 30 less than A less than 170, the binding energy per nucleon (a) rises sharply (b) is zero (c) is nearly constant at about 8 to 8.8 MeV (d) falls sharply
5. The nearly constant BE/A over a wide range of A is a result of (a) Coulomb repulsion (b) the long range of the nuclear force (c) the charge of the neutron (d) the short range and saturation of the nuclear force
6. The decrease of BE/A for heavy nuclei is mainly due to (a) the surface effect (b) Coulomb repulsion between protons (c) the absence of neutrons (d) gravitational attraction
7. Both fission and fusion release energy because the products have (a) a higher binding energy per nucleon (b) a lower binding energy per nucleon (c) more total rest mass (d) more protons
8. Which nucleus has the highest binding energy per nucleon? (a) ²H (b) ⁴He (c) ⁵⁶Fe (d) ²³⁸U
9. Compared with its neighbours ³He and ⁶Li, the nucleus ⁴He has (a) a lower BE/A (b) an unusually high BE/A (c) zero BE/A (d) the same BE/A
10. The binding energy per nucleon of the deuteron is about (a) 2.22 MeV (b) 7.07 MeV (c) 0.511 MeV (d) 1.11 MeV
Level 2: NEET standard
11. The binding energy of ⁴He is 28.3 MeV. Its binding energy per nucleon is (a) 7.07 MeV (b) 14.15 MeV (c) 28.3 MeV (d) 3.54 MeV
12. The binding energy per nucleon of ⁵⁶Fe is 8.79 MeV. Its total binding energy is about (a) 8.79 MeV (b) 157 MeV (c) 492 MeV (d) 4920 MeV
13. A nucleus (A = 240, BE/A = 7.6 MeV) splits into two nuclei of A = 120, each with BE/A = 8.5 MeV. The energy released is (a) 108 MeV (b) 216 MeV (c) 2040 MeV (d) 1824 MeV
14. Two ²H nuclei (BE/A = 1.1 MeV) fuse to form ⁴He (BE/A = 7.0 MeV). The energy released is (a) 5.9 MeV (b) 28 MeV (c) 32.4 MeV (d) 23.6 MeV
15. A nucleus X (A = 180, BE/A = 8.0 MeV) splits into Y (A = 110, BE/A = 8.4 MeV) and Z (A = 70, BE/A = 8.5 MeV). The energy released is (a) 0.9 MeV (b) 159 MeV (c) 79 MeV (d) 1519 MeV
16. Which process releases energy? (a) Fusion of two very light nuclei into a nucleus of A between 4 and 20 (b) Fission of a nucleus of A = 56 into two equal parts (c) Fusion of two nuclei of A = 56 (d) Splitting ⁴He into two deuterons
17. The BE/A of ¹⁶O is 7.98 MeV. The energy needed to break it completely into free nucleons is about (a) 7.98 MeV (b) 8.0 MeV (c) 15.96 MeV (d) 127.7 MeV
18. A nucleus with A = 20 has BE/A = 8.0 MeV. Its mass defect is about (a) 0.0086 u (b) 0.172 u (c) 1.72 u (d) 160 u
19. Light nuclei (A below 20) have lower BE/A mainly because (a) a large fraction of their nucleons lie at the surface with fewer neighbours (b) their Coulomb repulsion is largest (c) they contain no neutrons (d) the nuclear force is weaker in them
20. Masses: ¹²C 12.000000 u, ¹³C 13.003355 u, n 1.008665 u. The energy needed to remove one neutron from ¹³C is about (a) 8.0 MeV (b) 0.495 MeV (c) 4.95 MeV (d) 1.008 MeV
21. A nucleus with A = 200 has BE/A = 7.5 MeV. Its total binding energy is (a) 26.7 MeV (b) 1500 MeV (c) 7.5 MeV (d) 207.5 MeV
22. Iron-group nuclei release no energy by either fission or fusion because (a) they have no neutrons (b) they are too light (c) they are radioactive (d) they lie at the peak of the BE/A curve
Level 3: Challenge
23. A nucleus with A = 236 (BE/A = 7.6 MeV) splits into nuclei of A = 140 (BE/A = 8.3 MeV) and A = 94 (BE/A = 8.6 MeV), plus two neutrons. The energy released is about (a) 1970 MeV (b) 7.6 MeV (c) 177 MeV (d) 88 MeV
24. Using m_H = 1.007825 u, m_n = 1.008665 u and the atomic mass of ⁷Li = 7.016004 u, the BE/A of ⁷Li is about (a) 5.61 MeV (b) 39.25 MeV (c) 7.07 MeV (d) 6.25 MeV
25. BE/A values: ²H 1.11 MeV, ³H 2.83 MeV, ⁴He 7.07 MeV. The energy released in ²H + ³H → ⁴He + n is about (a) 3.13 MeV (b) 11.0 MeV (c) 28.3 MeV (d) 17.6 MeV
26. D–T fusion releases 17.6 MeV and ²³⁵U fission (with its triggering neutron) releases 200 MeV. The ratio of energy released per nucleon of fuel, fusion to fission, is (a) 0.09 (b) about 4 (c) about 1 (d) about 11
27. BE/A of ⁴He is 7.07 MeV and of ⁸Be is 7.06 MeV. When two ⁴He nuclei combine to form ⁸Be, the process (a) releases 56.5 MeV (b) releases about 0.08 MeV (c) needs about 0.08 MeV (d) involves no energy change
28. The correct order of binding energy per nucleon is (a) ²H less than ²³⁸U less than ⁵⁶Fe (b) ⁵⁶Fe less than ²³⁸U less than ²H (c) ²³⁸U less than ²H less than ⁵⁶Fe (d) ²H less than ⁵⁶Fe less than ²³⁸U
29. Assertion (A): Energy is released when a heavy nucleus splits into two medium-mass nuclei. Reason (R): The nuclear force between two nucleons does not depend on their charge. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The nucleus with the largest total binding energy is the most stable. Statement II: The binding energy per nucleon of ⁴He is greater than that of ⁶Li. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Peak near iron |
| 2 | d | About 8.8 MeV at A = 56 to 62 |
| 3 | a | Each nucleon is held more tightly |
| 4 | c | Flat middle of the curve |
| 5 | d | Each nucleon bonds only with neighbours |
| 6 | b | Repulsion grows about as Z² |
| 7 | a | Moving towards the peak frees energy |
| 8 | c | 8.79 MeV is the highest listed |
| 9 | b | 7.07 MeV against 2.57 and 5.33 MeV |
| 10 | d | 2.22/2 = 1.11 MeV |
| 11 | a | 28.3/4 |
| 12 | c | 56 × 8.79 = 492 MeV |
| 13 | b | 240 × 0.9 = 216 MeV |
| 14 | d | 28 − 4.4 = 23.6 MeV |
| 15 | c | 1519 − 1440 = 79 MeV |
| 16 | a | Light nuclei move up the steep side |
| 17 | d | 16 × 7.98 = 127.7 MeV |
| 18 | b | 160/931.5 = 0.172 u |
| 19 | a | Surface nucleons have fewer neighbours |
| 20 | c | 0.005310 × 931.5 = 4.95 MeV |
| 21 | b | 200 × 7.5 |
| 22 | d | No move can raise BE/A from the peak |
| 23 | c | 1162 + 808.4 − 1793.6 = 176.8 MeV |
| 24 | a | 39.25/7 = 5.61 MeV |
| 25 | d | 28.28 − (2.22 + 8.49) = 17.6 MeV |
| 26 | b | 3.52 versus 0.85 MeV per nucleon |
| 27 | c | 8 × (7.06 − 7.07) = −0.08 MeV |
| 28 | a | 1.11, 7.57, 8.79 MeV |
| 29 | b | R is true but the reason is the rise in BE/A |
| 30 | d | ²³⁸U has the largest total BE but is not the most stable |
Chapter 6 revision sheet
One-page summary
Binding energy per nucleon BE/A = total BE divided by A. It measures how tightly each nucleon is held.
Higher BE/A means a more stable nucleus.
The BE/A curve rises steeply for light nuclei (A below about 20), with spikes at ⁴He, ¹²C and ¹⁶O.
It is nearly flat, about 8 to 8.8 MeV, for A from about 30 to 170, because the nuclear force saturates.
The maximum is about 8.8 MeV near A = 56 (iron region).
For heavy nuclei BE/A falls slowly (about 7.6 MeV for ²³⁸U) because Coulomb repulsion grows.
Light nuclei have low BE/A because a large fraction of their nucleons sit at the surface with fewer neighbours.
Fission of a heavy nucleus into two middle nuclei raises BE/A and releases energy.
Fusion of two light nuclei into a heavier one raises BE/A and releases energy.
Both processes move towards the peak of the curve. Iron neither fuses nor splits with energy gain.
Q = (A × BE/A of products, summed) − (A × BE/A of reactants, summed).
Total BE grows with A even where BE/A falls: ²³⁸U has a much larger total BE than ⁵⁶Fe.
Must-remember table
| Nucleus | BE/A (MeV) | Total BE (MeV) |
|---|---|---|
| ²H | 1.11 | 2.22 |
| ⁴He | 7.07 | 28.3 |
| ¹²C | 7.68 | 92.2 |
| ¹⁶O | 7.98 | 127.6 |
| ⁵⁶Fe | 8.79 | 492 |
| ²³⁸U | 7.57 | 1802 |
Memory aids
"Climb, Plateau, Slide": the curve climbs fast (light), plateaus (middle), slides gently (heavy).
"Iron is the summit": every energy-releasing nuclear change walks uphill towards A = 56.
"1, 7, 8.8, 7.6": BE/A of deuteron, helium, iron, uranium in MeV, to locate any nucleus on the curve.
"Total grows, per-head peaks": total BE always rises with A; BE per nucleon peaks at iron.
Concept connections
Reading slopes and peaks of the BE/A curve uses the graph skills from Physics Book 2: Kinematics.
Coulomb repulsion that pulls BE/A down for heavy nuclei is the same force as in Physics Book 11: Electrostatics.
Stability and energy release ideas parallel bond energies in Chemistry Book 3: Chemical Bonding and Molecular Structure.
Practice MCQs: Chapter 6, Level 4 (new NEET pattern)
31. Match each nucleus (List I) with its approximate BE/A (List II).
List I:
A. ²H
B. ⁴He
C. ⁵⁶Fe
D. ²³⁸U
List II:
i. 8.79 MeV
ii. 7.57 MeV
iii. 1.11 MeV
iv. 7.07 MeV
(a) A-iii, B-ii, C-i, D-iv (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
32. Match each region of the BE/A curve (List I) with its feature (List II).
List I:
A. A below 20
B. A from about 30 to 170
C. A near 56
D. A above 170
List II:
i. Nearly flat, about 8 to 8.8 MeV
ii. Slow decline; fission is favourable
iii. Steep rise with spikes at ⁴He, ¹²C, ¹⁶O
iv. Maximum BE/A, most stable nuclei
(a) A-iii, B-iv, C-i, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-i, C-iv, D-ii
33. Match each nucleus and its total binding energy (List I) with its BE/A (List II).
List I:
A. ⁴He, 28.3 MeV
B. ¹²C, 92.2 MeV
C. ¹⁶O, 127.6 MeV
D. ⁵⁶Fe, 492 MeV
List II:
i. 7.98 MeV
ii. 8.79 MeV
iii. 7.07 MeV
iv. 7.68 MeV
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-ii, D-i
34. Match each feature of the curve (List I) with its cause (List II).
List I:
A. BE/A nearly constant for medium nuclei
B. BE/A falls for heavy nuclei
C. BE/A low for very light nuclei
D. ⁴He sits above its neighbours
List II:
i. A large share of nucleons sit at the surface with fewer neighbours
ii. Saturation of the nuclear force
iii. Two protons and two neutrons form a very compact, tightly bound unit
iv. Growing Coulomb repulsion between protons
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-i, C-iv, D-iii
35. How many of the following statements are correct?
A. A higher BE/A means a more stable nucleus.
B. The total binding energy of ²³⁸U is greater than that of ⁵⁶Fe.
C. BE/A of ²³⁸U is greater than that of ⁵⁶Fe.
D. Both fission and fusion move nuclei towards the peak of the BE/A curve.
(a) 2 (b) 4 (c) 1 (d) 3
36. Choose the correct set of statements.
A. Q = (total BE of products) − (total BE of reactants).
B. Fusing two deuterons (1.11 MeV per nucleon) into ⁴He (7.07 MeV per nucleon) releases about 23.8 MeV.
C. A nucleus with A = 240 and BE/A = 7.6 MeV splitting into two nuclei of A = 120 and BE/A = 8.5 MeV releases about 216 MeV.
D. Splitting a nucleus at the peak of the curve into two equal halves releases energy.
(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D
37. Which statements are correct?
A. The BE/A of the deuteron is 2.22 MeV.
B. Nucleons in ⁵⁶Fe are among the most tightly bound of all nuclei.
C. For medium nuclei, total BE is roughly proportional to A.
D. Light nuclei release energy mainly by fission.
(a) A and B only (b) C and D only (c) B and C only (d) A, B and C only
38. How many of these statements about the BE/A curve are correct?
A. Its peak value is about 8.8 MeV.
B. ⁴He lies above the trend of its neighbours.
C. Energy must be supplied to split ⁵⁶Fe into two equal halves.
D. BE/A of ²³⁸U is about 7.6 MeV.
E. BE/A increases steadily with A all the way to uranium.
(a) 3 (b) 4 (c) 5 (d) 2
39. A BE/A versus A graph marks four points: P (A = 2, 1.1 MeV), Q (A = 4, 7.1 MeV), R (A = 56, 8.8 MeV) and S (A = 235, 7.6 MeV). Points near A = 28 and A = 112 lie below R, and the point near A = 117 is at about 8.5 MeV. Which change releases energy?
(a) R splitting into two nuclei of A = 28 (b) Q splitting into two P nuclei (c) Two R nuclei fusing into A = 112 (d) S splitting into two nuclei near A = 117
40. A table gives data for a fission.
| Nucleus | A | BE/A (MeV) |
|---|---|---|
| X (parent) | 180 | 8.0 |
| Y (each product) | 90 | 8.6 |
For X → Y + Y, the energy released is:
(a) 108 MeV (b) 54 MeV (c) 1548 MeV (d) 1440 MeV
41. Given BE/A: ²H = 1.11 MeV, ⁴He = 7.07 MeV, ⁶Li = 5.33 MeV. For ²H + ⁴He → ⁶Li, the Q-value is about:
(a) 31.98 MeV (b) −1.48 MeV (c) 1.48 MeV (d) 3.48 MeV
Passage for Q42–43. In a model calculation, a heavy nucleus with A = 200 and BE/A = 7.9 MeV splits into two equal fragments, each with BE/A = 8.4 MeV. No neutrons are released. Take R = R₀A^(1/3).
42. The energy released is:
(a) 50 MeV (b) 100 MeV (c) 1680 MeV (d) 0.5 MeV
43. The ratio of the radius of one fragment to the radius of the parent is about:
(a) 0.50 (b) 0.63 (c) 0.71 (d) 0.79
44. Using atomic masses ⁴He = 4.002603 u and ¹²C = 12.000000 u, the minimum energy needed to break a ¹²C nucleus into three alpha particles is about:
(a) 7.27 MeV (b) 92.2 MeV (c) 84.9 MeV (d) 0.0078 MeV
45. Consider ⁵⁶Fe (BE/A 8.79 MeV), ¹²⁰Sn (8.50 MeV), ²⁰⁸Pb (7.87 MeV) and ²³⁸U (7.57 MeV). Which is correct?
(a) ⁵⁶Fe has both the highest total BE and the highest BE/A (b) ²³⁸U has both the highest total BE and the highest BE/A (c) ²³⁸U has the highest total BE; ⁵⁶Fe has the highest BE/A (d) ²⁰⁸Pb has the highest total BE; ¹²⁰Sn has the highest BE/A
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Standard values: 1.11, 7.07, 8.79, 7.57 MeV |
| 32 | d | Rise, plateau, peak at 56, slow fall for heavy nuclei |
| 33 | a | 28.3/4 = 7.07; 92.2/12 = 7.68; 127.6/16 = 7.98; 492/56 = 8.79 |
| 34 | c | Saturation; Coulomb repulsion; surface effect; compact ⁴He |
| 35 | d | C is false: iron has the higher BE/A. B: 238 × 7.57 = 1802 MeV against 492 MeV |
| 36 | a | B: 4 × 7.07 − 4 × 1.11 = 23.8 MeV. C: 240 × (8.5 − 7.6) = 216 MeV. D is false |
| 37 | c | Deuteron BE/A = 2.22/2 = 1.11 MeV; light nuclei release energy by fusion |
| 38 | b | E is false; the curve peaks near A = 56 |
| 39 | d | Only S moves up the curve (7.6 to 8.5 MeV); the others move down |
| 40 | a | Q = 2 × 90 × 8.6 − 180 × 8.0 = 1548 − 1440 = 108 MeV |
| 41 | c | Q = 6 × 5.33 − (2 × 1.11 + 4 × 7.07) = 31.98 − 30.50 = 1.48 MeV |
| 42 | b | Q = 200 × (8.4 − 7.9) = 100 MeV |
| 43 | d | R ratio = (100/200)^(1/3) = 0.794 |
| 44 | a | Δm = 3 × 4.002603 − 12 = 0.007809 u; energy = 0.007809 × 931.5 = 7.27 MeV |
| 45 | c | Totals: Fe 492, Sn 1020, Pb 1637, U 1802 MeV; Fe has the largest BE/A |