Chapter 8: Metallic Bonding and Hydrogen Bonding
What you will learn
The electron sea model of metallic bonding and the properties it explains.
How metallic bond strength changes with valence electrons and atomic size.
What a hydrogen bond is, and which atoms can form one.
Intermolecular and intramolecular hydrogen bonds, with examples.
How hydrogen bonding affects boiling point, solubility, density of ice, viscosity and biology.
8.1 Metallic bonding: the electron sea model
Metals have few valence electrons and low ionisation enthalpies. They cannot form an octet by sharing with neighbours, and there is no partner to take their electrons. So they bond in a different way.
In the electron sea model (Drude and Lorentz), each metal atom gives up its valence electrons to a common pool. What remains are positive kernels (ions) fixed in a regular lattice. The freed electrons move through the whole crystal like a sea. The attraction between the kernels and this mobile sea of electrons is the metallic bond.
Picture a crowded Mumbai local train: the seats (kernels) stay in place, but the standing passengers (electrons) move freely along the whole compartment. Everyone is held together inside the same coach.
Properties explained by the model:
| Property | Explanation |
|---|---|
| Electrical conductivity | Mobile electrons drift when a voltage is applied |
| Thermal conductivity | Free electrons carry kinetic energy quickly through the metal |
| Metallic lustre | Free electrons absorb and re-emit light falling on the surface |
| Malleability and ductility | The bond is non-directional; layers of kernels slide over each other without breaking the bond |
| Generally high melting points | Strong attraction between kernels and the electron sea |
Strength of the metallic bond increases when:
More valence electrons per atom join the sea: Na (1) < Mg (2) < Al (3). Melting points: 98 °C, 650 °C, 660 °C.
The kernel is smaller, so it attracts the sea more strongly. Down group 1, size increases and the bond weakens: Li (181 °C) > Na (98 °C) > K (63 °C) > Rb (39 °C) > Cs (28 °C).
Transition metals add d electrons to the sea, which makes their metallic bonds very strong (iron melts near 1538 °C, tungsten near 3422 °C).
Worked example 8.1: Arrange Na, Mg and Al in increasing order of metallic bond strength and give the reason.
Solution: All three are in period 3. The number of electrons each contributes to the sea rises 1, 2, 3, and the kernel shrinks from Na⁺ to Al³⁺. Both effects strengthen the bond. Order: Na < Mg < Al.
Worked example 8.2: Caesium melts on a hot summer day in Rajasthan (28 °C), while lithium needs 181 °C. Explain.
Solution: Both give one electron to the sea. But the Cs⁺ kernel is much larger than Li⁺. The electron sea is farther from the kernel's charge, so the attraction is weaker. Less energy is needed to loosen the lattice.
Comparing the bond types:
| Feature | Ionic | Covalent | Metallic |
|---|---|---|---|
| How electrons behave | Transferred | Shared between two atoms | Delocalised over the whole crystal |
| Directional? | No | Yes | No |
| Conduction in solid | No | No (except graphite) | Yes |
| Typical example | NaCl | CH₄, diamond | Cu, Na |
8.2 The hydrogen bond
When hydrogen is bonded to a small, highly electronegative atom (F, O or N), the shared pair is pulled far towards that atom. The H end is left with a large partial positive charge and is almost a bare proton. It is then attracted to a lone pair on an electronegative atom of another molecule (or another part of the same molecule).
This attraction is the hydrogen bond. It is shown with a dotted line:
Conditions for hydrogen bonding:
H must be bonded to a highly electronegative atom.
That atom must be small, so the charge is concentrated.
The acceptor atom must have a lone pair.
Only F, O and N meet these conditions well. Chlorine has the same electronegativity as nitrogen (3.0) but is much larger, so its hydrogen bonds are very weak.
Strength. A hydrogen bond is much weaker than a covalent bond. It is roughly 10 to 40 kJ mol⁻¹, compared with about 400 to 500 kJ mol⁻¹ for an O–H or H–F covalent bond. But it is stronger than ordinary dipole–dipole or dispersion forces. Strength order:
8.3 Types of hydrogen bonds
Intermolecular hydrogen bond: between two different molecules, of the same or different compounds.
HF: molecules join into zig-zag chains, (HF)ₙ.
Water: each O can accept two hydrogen bonds (two lone pairs) and donate two (two H atoms).
Alcohols, ammonia, carboxylic acids. Acetic acid forms a cyclic dimer held by two O–H···O bonds in benzene and in the vapour.
p-Nitrophenol and p-hydroxybenzaldehyde: the groups are too far apart within one molecule, so they bond with neighbours.
Intramolecular hydrogen bond: within the same molecule, between two groups placed close to each other, usually forming a five- or six-membered ring (chelation).
o-Nitrophenol: the O–H hydrogen bonds to an O of the nearby NO₂ group.
o-Hydroxybenzaldehyde (salicylaldehyde) and o-hydroxybenzoic acid (salicylic acid).

Each HF molecule has one H to share, so it forms a chain; each water molecule both donates two hydrogen bonds and accepts two, building the 3-D network that gives water its high boiling point and ice its open structure.
8.4 Effects and applications of hydrogen bonding
1. Boiling points. Molecules joined by hydrogen bonds need extra energy to separate. Hydrides of N, O and F boil far higher than expected from molar mass alone.
| Group | Hydrides and boiling points (°C) | Trend |
|---|---|---|
| 14 | CH₄ (−161), SiH₄ (−112), GeH₄ (−88), SnH₄ (−52) | Rises steadily with molar mass; no H-bonding |
| 15 | NH₃ (−33), PH₃ (−88), AsH₃ (−62), SbH₃ (−17) | NH₃ anomalously high |
| 16 | H₂O (100), H₂S (−60), H₂Se (−41), H₂Te (−2) | H₂O far highest |
| 17 | HF (19.5), HCl (−85), HBr (−67), HI (−35) | HF highest |
2. Solubility. Compounds that can hydrogen bond with water dissolve in it: ethanol, ammonia, glucose, sugar in chai. Hydrocarbons cannot and stay as a separate layer, like oil on water.
3. Ice floats. In ice, each O is surrounded tetrahedrally by four H atoms: two by covalent bonds and two by hydrogen bonds. This builds an open cage structure with empty spaces. When ice melts, some hydrogen bonds break and molecules pack closer. So liquid water is denser than ice, with maximum density at 4 °C. In Kashmir's winter, Dal Lake freezes at the surface while fish survive in the denser water below.
4. Volatility of ortho isomers. In o-nitrophenol, the intramolecular hydrogen bond ties up the O–H. Molecules do not hold each other, so o-nitrophenol is more volatile (it can be steam distilled) and less soluble in water than p-nitrophenol.
5. Viscosity and surface tension. Glycerol, with three OH groups, forms many hydrogen bonds and is thick and syrupy. Concentrated H₂SO₄ is viscous for the same reason.
6. Association and unusual species. Acetic acid shows a molar mass near 120 (a dimer) in benzene. HF forms the HF₂⁻ ion (F–H···F)⁻, so KHF₂ exists, but KHCl₂ does not.
7. Biology. The two strands of DNA are held together by hydrogen bonds between bases: adenine–thymine (two bonds) and guanine–cytosine (three bonds). Proteins hold their α-helix shape through N–H···O=C hydrogen bonds.
Worked example 8.3: H₂O (molar mass 18) boils at 100 °C, but H₂S (molar mass 34) boils at −60 °C. Explain.
Solution: O is small and highly electronegative, so water molecules form strong hydrogen bonds. S is larger and less electronegative; H₂S has only weak dipole and dispersion forces. Breaking the hydrogen-bond network needs much more energy, so water boils far higher despite its lower molar mass.
Worked example 8.4: Arrange HF, HCl, HBr and HI in decreasing order of boiling point.
Solution: From HCl to HI, molar mass and dispersion forces rise, so boiling point rises: HCl < HBr < HI. HF is above all of them because of hydrogen bonding. Order: HF > HI > HBr > HCl.
Worked example 8.5: Why is o-nitrophenol steam volatile while p-nitrophenol is not?
Solution: In o-nitrophenol, OH and NO₂ are next to each other and form an intramolecular hydrogen bond. Each molecule is self-contained, so molecules escape easily. In p-nitrophenol, the groups are far apart and bond with other molecules (intermolecular). The molecules stay associated, raising the boiling point.
Worked example 8.6: Acetic acid (CH₃COOH, molar mass 60) is dissolved in benzene. What molar mass would a measurement suggest if the acid were fully dimerised? Why does this happen?
Solution: Two molecules join through two O–H···O hydrogen bonds into a cyclic dimer. The particle count halves, so the apparent molar mass doubles to 2 × 60 = 120 g mol⁻¹. In water this does not happen, because water hydrogen bonds with the acid instead.
Worked example 8.7: Explain why KHF₂ exists but KHCl₂ does not.
Solution: F⁻ is small and very electronegative. It forms a strong hydrogen bond with HF to give the stable ion [F–H···F]⁻. Cl⁻ is large; its hydrogen bond with HCl is too weak to give a stable HCl₂⁻ ion in such a salt.
Worked example 8.8: Water (100 °C) boils higher than HF (19.5 °C), though F–H···F is the strongest hydrogen bond. Why?
Solution: Each HF molecule has one H to donate, so it forms on average one hydrogen bond per molecule (a chain). Each H₂O has two H atoms and two lone pairs, so it forms a 3-D network with two hydrogen bonds per molecule on average. More hydrogen bonds per molecule outweigh the slightly stronger individual bond in HF.
Worked example 8.9 (NEET-hard): In ice, every water molecule takes part in four hydrogen bonds. How many hydrogen bonds are there per molecule on average? How many in 18 g of ice?
Solution: Each hydrogen bond is shared by two molecules. So the count per molecule is 4 / 2 = 2. 18 g of ice is 1 mol, so it has 2 mol of hydrogen bonds, which is 2 × 6.022 × 10²³ ≈ 1.20 × 10²⁴ hydrogen bonds.
Quick revision
Metallic bond: attraction between positive kernels and a sea of delocalised valence electrons; non-directional.
It explains conductivity, lustre, malleability and ductility.
Metallic bond strength rises with more valence electrons and smaller kernels: Na < Mg < Al; Li > Na > K > Rb > Cs.
Hydrogen bond: X–H···Y with X, Y = F, O, N; about 10–40 kJ mol⁻¹. Strength F–H···F > O–H···O > N–H···N.
Intermolecular: H₂O, HF, alcohols, acetic acid dimer, p-nitrophenol. Intramolecular: o-nitrophenol, salicylaldehyde, salicylic acid.
Ice is less dense than water (open cage); water is densest at 4 °C.
Boiling points: H₂O > H₂Te > H₂Se > H₂S; HF > HI > HBr > HCl; SbH₃ > NH₃ > AsH₃ > PH₃.
DNA: A–T two hydrogen bonds, G–C three.
NEET traps
Treating a hydrogen bond as a covalent bond. It is a much weaker attraction.
Expecting HCl to hydrogen bond strongly because Cl has electronegativity 3.0. Its large size makes the bond very weak.
Saying o-nitrophenol has the higher boiling point. Intramolecular bonding makes it more volatile.
Placing NH₃ at the top of group 15 boiling points. SbH₃ boils higher because of its much larger mass.
Saying water is densest at 0 °C. It is densest at 4 °C.
Assuming the strongest hydrogen bond (HF) gives the highest boiling point. The number of bonds per molecule matters too.
Practice MCQs: Chapter 8
Level 1: Concept check
1. In a metallic bond, the valence electrons are (a) delocalised over the whole crystal (b) localised between two atoms (c) transferred to anions (d) held as lone pairs
2. Hydrogen bonding is strongest when H is attached to (a) Cl (b) S (c) C (d) F
3. Ice is less dense than liquid water because (a) ice has covalent bonds between molecules (b) hydrogen bonds give ice an open cage structure (c) ice has metallic bonding (d) ice has only van der Waals forces
4. An intramolecular hydrogen bond is present in (a) p-nitrophenol (b) water (c) o-nitrophenol (d) ethanol
5. The highest boiling point is shown by (a) H₂O (b) H₂S (c) H₂Se (d) H₂Te
6. Metals conduct electricity because of (a) moving positive kernels (b) mobile delocalised electrons (c) free anions (d) hydrogen bonding
7. The typical strength of a hydrogen bond is about (a) 400–500 kJ mol⁻¹ (b) 800 kJ mol⁻¹ (c) 0.1 kJ mol⁻¹ (d) 10–40 kJ mol⁻¹
8. Which compound shows no hydrogen bonding? (a) NH₃ (b) HF (c) CH₄ (d) C₂H₅OH
9. Water has its maximum density at (a) 4 °C (b) 0 °C (c) 100 °C (d) −4 °C
10. The number of hydrogen bonds between guanine and cytosine in DNA is (a) 1 (b) 2 (c) 4 (d) 3
Level 2: NEET standard
11. The correct order of melting point is (a) Na > Mg > Al (b) Al > Mg > Na (c) Mg > Na > Al (d) Na > Al > Mg
12. The correct order of boiling point is (a) HF > HI > HBr > HCl (b) HI > HBr > HCl > HF (c) HCl > HBr > HI > HF (d) HF > HCl > HBr > HI
13. The strongest hydrogen bond among these is (a) O–H···N (b) N–H···N (c) F–H···F (d) O–H···O
14. o-Nitrophenol is more volatile than p-nitrophenol because (a) it has a larger molar mass (b) it forms stronger intermolecular hydrogen bonds (c) it is ionic (d) its intramolecular hydrogen bond prevents association between molecules
15. In benzene, acetic acid shows an apparent molar mass of about (a) 60 g mol⁻¹ (b) 120 g mol⁻¹ (c) 30 g mol⁻¹ (d) 180 g mol⁻¹
16. Which salt exists? (a) KHF₂ (b) KHCl₂ (c) KHBr₂ (d) KHI₂
17. The correct order of melting points of alkali metals is (a) Cs > Rb > K > Na > Li (b) Na > Li > K > Rb > Cs (c) Li > Na > K > Rb > Cs (d) K > Na > Li > Rb > Cs
18. Ethanol mixes with water in all proportions mainly because (a) its molar mass is low (b) it forms hydrogen bonds with water (c) it ionises completely (d) it has metallic bonding
19. The correct order of boiling point of group 15 hydrides is (a) NH₃ > PH₃ > AsH₃ > SbH₃ (b) PH₃ > AsH₃ > NH₃ > SbH₃ (c) NH₃ > SbH₃ > AsH₃ > PH₃ (d) SbH₃ > NH₃ > AsH₃ > PH₃
20. The malleability of metals is best explained by (a) directional covalent bonds (b) ions fixed rigidly in place (c) non-directional metallic bonding that lets layers slide (d) hydrogen bonding
21. An intramolecular hydrogen bond is present in (a) o-hydroxybenzaldehyde (b) p-hydroxybenzaldehyde (c) phenol (d) water
22. In ice, the number of H atoms tetrahedrally surrounding each O atom is (a) 2 (b) 4 (c) 6 (d) 3
Level 3: Challenge
23. The average number of hydrogen bonds per water molecule in ice is (a) 4 (b) 1 (c) 3 (d) 2
24. The correct order of boiling point is (a) HF > H₂O > NH₃ (b) NH₃ > HF > H₂O (c) H₂O > HF > NH₃ (d) H₂O > NH₃ > HF
25. Water boils higher than HF even though F–H···F is the stronger hydrogen bond. This is because (a) water has a higher molar mass (b) each water molecule forms more hydrogen bonds on average (c) water is an ionic compound (d) HF is non-polar
26. In which pair do both compounds show intermolecular hydrogen bonding? (a) p-Nitrophenol and ethanol (b) o-Nitrophenol and salicylaldehyde (c) CH₄ and ethanol (d) o-Nitrophenol and p-nitrophenol
27. Magnesium melts much higher than sodium mainly because (a) Mg atoms are larger (b) Mg contributes fewer electrons to the sea (c) Mg has a lower nuclear charge (d) Mg contributes more electrons to the sea and has a smaller kernel
28. Glycerol is very viscous because (a) of its high molar mass alone (b) it is ionic (c) its three OH groups form extensive hydrogen bonds (d) it has metallic bonding
29. Assertion (A): H₂O is a liquid while H₂S is a gas at room temperature. Reason (R): H₂S has a higher molar mass than H₂O. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Ice floats on water because hydrogen bonding gives ice an open structure. Statement II: A hydrogen bond is stronger than a typical covalent bond. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | Electron sea model. |
| 2 | d | F is smallest and most electronegative. |
| 3 | b | Tetrahedral H-bond network leaves empty space. |
| 4 | c | OH and NO₂ are adjacent. |
| 5 | a | Water forms hydrogen bonds. |
| 6 | b | Free electrons carry charge. |
| 7 | d | Far weaker than covalent bonds. |
| 8 | c | C is not electronegative enough. |
| 9 | a | Open structure collapses up to 4 °C. |
| 10 | d | G–C has three, A–T two. |
| 11 | b | More electrons in the sea, smaller kernel. |
| 12 | a | HF hydrogen bonds; rest follow molar mass. |
| 13 | c | F is the most electronegative. |
| 14 | d | Intramolecular bond leaves molecules unassociated. |
| 15 | b | Cyclic dimer: 2 × 60. |
| 16 | a | Strong F–H···F⁻ bond gives HF₂⁻. |
| 17 | c | Kernel size grows down the group. |
| 18 | b | O–H groups bond with water. |
| 19 | d | −17 > −33 > −62 > −88 °C. |
| 20 | c | Layers slide; the sea still binds them. |
| 21 | a | Adjacent OH and CHO form a ring. |
| 22 | b | Two covalent + two hydrogen-bonded H. |
| 23 | d | 4 bonds each shared by 2 molecules. |
| 24 | c | 100 > 19.5 > −33 °C. |
| 25 | b | Two H-bonds per water versus one per HF. |
| 26 | a | Both bond with neighbouring molecules. |
| 27 | d | Two electrons per atom, smaller Mg²⁺. |
| 28 | c | Many H-bonds resist flow. |
| 29 | b | The real reason is hydrogen bonding in water. |
| 30 | c | H-bonds are much weaker than covalent bonds. |
Chapter 8 revision sheet
One-page summary
Metallic bond: positive metal kernels sit in a "sea" of delocalised valence electrons that belong to the whole crystal.
The bond is non-directional, so layers of kernels can slide: metals are malleable and ductile.
Free electrons carry charge and heat (good conductors) and absorb and re-emit light (lustre).
Metallic bond strength rises with more delocalised electrons per atom and smaller kernels: Na < Mg < Al in melting point.
Hydrogen bond: attraction between an H atom bonded to F, O or N and a lone pair on another F, O or N.
Typical strength about 10–40 kJ mol⁻¹: much weaker than covalent bonds but stronger than ordinary van der Waals forces.
Strength order: F–H···F > O–H···O > N–H···N.
Intermolecular H-bonds (between molecules) raise boiling point, viscosity and solubility in water: H₂O, HF, NH₃, alcohols, p-nitrophenol.
Intramolecular H-bonds (within one molecule) form a ring, block bonding to neighbours, and lower boiling point: o-nitrophenol, salicylaldehyde.
o-Nitrophenol is steam volatile and less soluble in water than p-nitrophenol.
Boiling points: H₂O 373 K > HF 293 K > NH₃ 240 K; H₂O has two H and two lone pairs, so it forms the most H-bonds per molecule.
HF forms zig-zag chains; KHF₂ exists because of the strong F–H···F bond in HF₂⁻.
Ice: each O is tetrahedrally linked to four others, giving an open cage; ice is less dense than water, and water is densest at 4 °C (277 K).
Carboxylic acids such as acetic acid form H-bonded dimers in non-polar solvents, so their apparent molar mass doubles.
Must-remember table
| Substance or pair | Value or behaviour | Reason |
|---|---|---|
| H₂O / HF / NH₃ / H₂S | bp 373 / 293 / 240 / 213 K | H-bonding in the first three; none in H₂S |
| Ethanol vs dimethyl ether (both 46 g mol⁻¹) | bp 351 K vs 248 K | O–H in ethanol forms H-bonds |
| o- vs p-nitrophenol | o lower bp, steam volatile | Intramolecular vs intermolecular H-bond |
| Acetic acid in benzene | Apparent molar mass about 120 g mol⁻¹ | Dimer held by two H-bonds |
| Ice vs water | Ice less dense; water densest at 277 K | Open tetrahedral cage in ice |
| Na / Mg / Al | Melting point rises | 1, 2, 3 delocalised electrons per atom |
Memory aids
"H-bonds only call FON": hydrogen bonds need H attached to F, O or N.
"Ortho hugs itself, para holds hands": ortho-substituted phenols bond within the molecule; para ones bond with neighbours.
"Four degrees, four neighbours": water is densest at 4 °C; each O in ice has four O neighbours.
"More electrons, tighter metal": more delocalised electrons per atom (Na 1, Mg 2, Al 3) give a stronger metallic bond.
Concept connections
Boiling points and solubility of alcohols, phenols and acids are explained in Chemistry Book 17: Organic Compounds Containing Oxygen.
Base pairing in DNA and the secondary structure of proteins rely on H-bonds, covered in Chemistry Book 19: Biomolecules.
Association of acetic acid and abnormal molar masses appear in Chemistry Book 5: Solutions.
Practice MCQs: Chapter 8, Level 4 (new NEET pattern)
31. Match List I (substance) with List II (type of hydrogen bonding).
List I: A. o-Nitrophenol · B. p-Nitrophenol · C. Liquid HF · D. Ice
List II: (i) Zig-zag chains · (ii) Intramolecular · (iii) Open tetrahedral cage · (iv) Intermolecular between ring molecules
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii
32. Match List I (hydride) with List II (boiling point in K).
List I: A. H₂O · B. HF · C. NH₃ · D. H₂S
List II: (i) 213 · (ii) 240 · (iii) 293 · (iv) 373
(a) A-iv, B-ii, C-iii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-iii, C-ii, D-i (d) A-iv, B-iii, C-i, D-ii
33. Match List I (property of metals) with List II (explanation by the electron sea model).
List I: A. Electrical conductivity · B. Malleability · C. Lustre · D. Higher melting point of Al than Na
List II: (i) Kernels slide while the electron sea keeps holding them · (ii) More delocalised electrons per atom and a smaller kernel · (iii) Mobile electrons drift when a voltage is applied · (iv) Free electrons absorb and re-emit light
(a) A-iii, B-ii, C-iv, D-i (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iii, B-i, C-iv, D-ii
34. Match List I (observation) with List II (cause).
List I: A. KHF₂ exists but KHCl₂ does not · B. Ethanol boils far above dimethyl ether · C. Acetic acid shows a molar mass near 120 g mol⁻¹ in benzene · D. Ice floats on water
List II: (i) Dimerisation through H-bonds · (ii) Very strong F–H···F hydrogen bond · (iii) Open cage structure · (iv) Intermolecular O–H···O bonds
(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-iii, D-i
35. How many of the following statements are correct?
A. A hydrogen bond is stronger than a typical covalent bond.
B. Hydrogen bonds form when H is bonded to any non-metal, such as C or S.
C. Intramolecular hydrogen bonding raises the boiling point.
D. Typical hydrogen bond strength is about 10–40 kJ mol⁻¹.
(a) One (b) Two (c) Three (d) Four
36. Choose the correct set of statements about metallic bonding.
A. The metallic bond is non-directional.
B. In the electron sea model, valence electrons stay on their own atoms.
C. Metals conduct heat well because free electrons carry energy.
D. Metallic bond strength generally increases from Na to Mg to Al.
(a) A and B only (b) B, C and D only (c) A, C and D only (d) A, B, C and D
37. How many statements are correct?
A. Water has its maximum density at 277 K.
B. In ice, each O atom is surrounded tetrahedrally by four O atoms.
C. Liquid water has a more open structure than ice.
D. Ice is denser than liquid water at 273 K.
(a) One (b) Two (c) Three (d) Four
38. Choose the correct set of statements about the nitrophenols.
A. o-Nitrophenol is steam volatile.
B. p-Nitrophenol boils at a higher temperature than o-nitrophenol.
C. o-Nitrophenol is more soluble in water than p-nitrophenol.
D. The intramolecular H-bond in o-nitrophenol closes a six-membered ring.
(a) A and C only (b) B and C only (c) A, B, C and D (d) A, B and D only
39. A graph of boiling point against period for group 16 hydrides shows H₂S (213 K), H₂Se (232 K) and H₂Te (271 K) rising in a straight trend, while H₂O (373 K) sits far above where the trend line predicts. The best explanation is (a) H₂O has the largest molar mass (b) H₂O has the weakest van der Waals forces (c) H₂O molecules are linked by extensive hydrogen bonding (d) H₂O is ionic
40. The table compares three compounds of similar molar mass.
| Compound | Molar mass (g mol⁻¹) | Boiling point (K) |
|---|---|---|
| CH₃CH₂OH | 46 | 351 |
| CH₃OCH₃ | 46 | 248 |
| CH₃CH₂CH₃ | 44 | 231 |
Why does ethanol boil so much higher? (a) It has a larger molar mass (b) Its O–H group forms intermolecular hydrogen bonds (c) It is ionic (d) It forms intramolecular hydrogen bonds
41. Acetic acid (formula mass 60 g mol⁻¹) dissolved in benzene gives an experimental molar mass of about 120 g mol⁻¹. The best explanation is (a) acetic acid ionises in benzene (b) acetic acid reacts with benzene (c) the measurement is always faulty in benzene (d) two molecules pair up through two O–H···O hydrogen bonds
Case for Q42–Q43: A student notes that HF boils at 293 K while HCl boils at 189 K, even though HCl is heavier. She also finds that potassium forms the salt KHF₂ but no KHCl₂. Water, whose single O–H···O bond is weaker than the F–H···F bond in HF, still boils at 373 K.
42. HF boils higher than HCl mainly because (a) HF molecules are linked by hydrogen bonds (b) HF has a larger molar mass (c) HCl is ionic (d) HF has no dipole moment
43. Which statement correctly explains why water boils higher than HF? (a) O is more electronegative than F (b) water is lighter (c) the O–H···O bond is stronger than F–H···F (d) each water molecule can form more hydrogen bonds on average (two H atoms and two lone pairs)
44. Which compound shows intramolecular hydrogen bonding? (a) Salicylaldehyde (o-hydroxybenzaldehyde) (b) p-Hydroxybenzaldehyde (c) Ethanol (d) Water
45. The correct order of hydrogen bond strength is (a) N–H···N > O–H···O > F–H···F (b) F–H···F > O–H···O > N–H···N (c) O–H···O > F–H···F > N–H···N (d) All are equal
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Ortho bonds within; para between; HF chains; ice cage |
| 32 | c | H₂O > HF > NH₃ > H₂S |
| 33 | d | Each property traced to the delocalised electrons |
| 34 | a | Each observation matched to its H-bond cause |
| 35 | a | Only D is correct |
| 36 | c | Electrons are delocalised over the whole metal |
| 37 | b | A and B true; ice is the open, less dense form |
| 38 | d | Ortho isomer cannot H-bond well with water, so it is less soluble |
| 39 | c | H-bonding lifts H₂O far above the trend |
| 40 | b | Same mass, but only ethanol has O–H |
| 41 | d | 2 × 60 = 120 for the dimer |
| 42 | a | H-bonding needs H on F, O or N; Cl does not qualify |
| 43 | d | More H-bonds per molecule outweigh the stronger single F–H···F bond |
| 44 | a | o-OH and CHO groups form a ring within the molecule |
| 45 | b | Strength follows the electronegativity of F > O > N |