Chapter 5 of 12 · 22 min read

Chapter 3: Covalent Character: Electronegativity, Fajans' Rules and Dipole Moment

What you will learn

  • What electronegativity means and how it makes a covalent bond polar.

  • How to judge bond type from the electronegativity difference.

  • Fajans' rules: why some "ionic" compounds behave partly covalent.

  • Dipole moment: definition, units, direction and vector addition.

  • How to use dipole moments to find shapes and percentage ionic character.

3.1 Electronegativity

Electronegativity is the ability of an atom in a chemical compound to attract the shared electron pair towards itself. It is not measured directly. It is a relative number on a scale. The most used scale is Linus Pauling's, where fluorine is given 4.0.

ElementFONClBrCSIHPBAlMgLiNaKCs
Pauling value4.03.53.03.02.82.52.52.52.12.12.01.51.21.00.90.80.7

Across a period, electronegativity increases (smaller atoms, higher effective nuclear charge). Down a group, it decreases (bigger atoms). The order F > O > N ≈ Cl is worth memorising.

Electronegativity is not electron gain enthalpy. Electron gain enthalpy is a measurable energy change for an isolated gaseous atom taking an electron. Electronegativity describes an atom inside a molecule pulling a shared pair. Cl has the most negative electron gain enthalpy, but F is the most electronegative.

3.2 From non-polar to ionic: a continuous scale

When two identical atoms bond (H₂, Cl₂, O₂), the shared pair sits exactly in the middle. The bond is non-polar covalent.

When the atoms differ, the shared pair shifts towards the more electronegative atom. That atom gets a partial negative charge (δ−), the other a partial positive charge (δ+). This is a polar covalent bond, as in Hδ+–Clδ−.

If the difference is very large, the electron is practically transferred. The bond is then ionic.

Electronegativity differenceBond type (rough guide)Examples
0Non-polar covalentH–H, Cl–Cl
Up to about 0.4Nearly non-polar covalentC–H (0.4)
About 0.5 to 1.7Polar covalentO–H (1.4), H–Cl (0.9), C–O (1.0)
More than about 1.7Mainly ionicNa–Cl (2.1), K–F (3.2)

The 1.7 cut-off is a guide, not a rule. HF has a difference of 1.9, yet it is a covalent gas. Real bonds lie on a continuous scale between pure covalent and pure ionic.

Worked example 3.1: Classify the bonds C–H, O–H, H–Cl, Na–Cl and Cl–Cl using Pauling values.

Solution: Differences: C–H = 0.4 (nearly non-polar), O–H = 1.4 (polar covalent), H–Cl = 0.9 (polar covalent), Na–Cl = 2.1 (ionic), Cl–Cl = 0 (non-polar). The O–H bond is more polar than H–Cl.

3.3 Fajans' rules: covalent character in ionic bonds

No ionic bond is 100% ionic. A cation pulls the electron cloud of a nearby anion towards itself. This distortion is called polarisation. The more the anion's cloud is pulled into the space between the nuclei, the more electron sharing there is. So the bond gains covalent character.

Kasimir Fajans (1924) summarised when this happens.

RuleGreater covalent character whenExample
1. Size of cationCation is small (high charge density)LiCl more covalent than NaCl, KCl
2. Charge of cationCation charge is highAlCl₃ > MgCl₂ > NaCl in covalent character
3. Size of anionAnion is large (its outer electrons are loosely held, easy to distort)LiI > LiBr > LiCl > LiF
4. Charge of anionAnion charge is highCovalent character of oxides/sulphides rises with anion charge, e.g. sulphides more covalent than chlorides of the same metal
5. Electronic configuration of cationCation has an 18-electron (pseudo noble gas) outer shell, such as Cu⁺, Ag⁺, Zn²⁺CuCl more covalent than NaCl though Cu⁺ and Na⁺ have similar radii

A handy measure for rules 1 and 2 is ionic potential, φ = charge / radius. Higher φ means more polarising power.

The d electrons of an 18-electron shell shield the nucleus poorly. So Cu⁺ "feels" more of its nuclear charge at its surface than Na⁺ does, and it polarises anions more.

Effects of covalent character. More covalent character means:

  • Lower melting point: NaCl melts at 801 °C, MgCl₂ at 714 °C, while AlCl₃ sublimes near 180 °C.

  • Lower solubility in water and higher solubility in organic solvents: LiCl dissolves in ethanol and pyridine, NaCl hardly does.

  • Lower solubility of silver halides down the group: AgF is very soluble, AgCl, AgBr and AgI are progressively less soluble.

  • Deeper colour in some cases: AgI is yellow, AgCl white.

A ceiling fan comparison helps here. A small, strongly charged cation is like a fan at full speed: it disturbs everything nearby. A large anion is like light paper: easy to move. Put the two together and you get the most distortion.

Worked example 3.2: Arrange NaCl, MgCl₂ and AlCl₃ in increasing order of covalent character.

Solution: The anion is the same. Cation charge rises Na⁺ (1+) < Mg²⁺ (2+) < Al³⁺ (3+) and size falls in the same order. So polarising power rises. Order: NaCl < MgCl₂ < AlCl₃.

Worked example 3.3: Which of LiF, LiCl, LiBr, LiI has the lowest melting point? Explain.

Solution: The cation is the same. The larger the anion, the easier it is to polarise, and I⁻ is the largest. So LiI has the most covalent character and the lowest melting point.

Worked example 3.4: CuCl melts at about 430 °C while NaCl melts at 801 °C. The radii of Cu⁺ and Na⁺ are close. Explain.

Solution: Cu⁺ has the configuration [Ar]3d¹⁰, an 18-electron outer shell. The d electrons shield the nucleus poorly, so Cu⁺ polarises Cl⁻ strongly. Na⁺ has a noble gas shell (2s²2p⁶) and polarises weakly. So CuCl has more covalent character and melts lower.

3.4 Dipole moment

A polar bond has two separated charges, +q and −q, a distance d apart. Its dipole moment is:

μ=q×d\mu = q \times d
  • SI unit: coulomb metre (C m). The common unit is the debye (D).

  • 1 D = 3.336 × 10⁻³⁰ C m.

  • Dipole moment is a vector. In chemistry it is drawn as a crossed arrow (+→) pointing from the positive end to the negative end of the bond.

Worked example 3.5: Charges of +0.5e and −0.5e are 100 pm apart. Find the dipole moment in debye. (e = 1.602 × 10⁻¹⁹ C)

Solution: μ = 0.5 × 1.602 × 10⁻¹⁹ × 100 × 10⁻¹² = 8.01 × 10⁻³¹ C m. In debye: 8.01 × 10⁻³¹ / 3.336 × 10⁻³⁰ = 2.40 D.

Percentage ionic character. If a bond were 100% ionic, the charges would be a full +e and −e. The dipole moment would then be e × d. Comparing the measured value with this gives:

% ionic character=μobservede×d×100\%\ \text{ionic character} = \frac{\mu_{\text{observed}}}{e \times d} \times 100

Worked example 3.6: HCl has μ = 1.03 D and bond length 127 pm. Find its percentage ionic character.

Solution: For full charges: e × d = 1.602 × 10⁻¹⁹ × 127 × 10⁻¹² = 2.035 × 10⁻²⁹ C m = 6.10 D. Percentage ionic character = 1.03 / 6.10 × 100 ≈ 16.9%. So the bond is mostly covalent, with about 17% ionic character.

3.5 Dipole moment of polyatomic molecules

The dipole moment of a molecule is the vector sum of its bond dipoles (and lone pair contributions). For two equal bond moments μ₁ at an angle θ:

μnet=μ12+μ22+2μ1μ2cos⁡θ,μ1=μ2⇒μnet=2μ1cos⁡θ2\mu_{\text{net}} = \sqrt{\mu_1^2 + \mu_2^2 + 2\mu_1\mu_2\cos\theta}, \qquad \mu_1 = \mu_2 \Rightarrow \mu_{\text{net}} = 2\mu_1\cos\frac{\theta}{2}
Figure 3.1 · Vector addition of bond dipoles in CO₂ and H₂O
Figure 3.1 · Vector addition of bond dipoles in CO₂ and H₂O

In CO₂ the two C=O dipoles point in opposite directions and cancel; in H₂O the bend at 104.5° lets the two O–H dipoles add to a net 1.85 D pointing towards oxygen.

  • CO₂ is linear (180°). The two C=O dipoles are equal and opposite. Net μ = 0, though each bond is polar.

  • H₂O is bent (104.5°). The two O–H dipoles add to give μ = 1.85 D.

  • BF₃ (trigonal planar), CH₄ and CCl₄ (tetrahedral), PCl₅, SF₆ and XeF₄ are symmetric: μ = 0.

Worked example 3.7: Two equal bond moments of 1.5 D make an angle of (i) 90° (ii) 120° (iii) 180°. Find the resultant in each case.

Solution: μ = 2 × 1.5 × cos(θ/2). (i) cos 45° = 0.707: μ = 2.12 D. (ii) cos 60° = 0.5: μ = 1.5 D. (iii) cos 90° = 0: μ = 0. The wider the angle, the more the moments cancel.

Worked example 3.8: Water has μ = 1.85 D and H–O–H angle 104.5°. Estimate the O–H bond moment, ignoring the lone pairs.

Solution: 1.85 = 2 × μ(O–H) × cos 52.25° = 2 × μ(O–H) × 0.612. So μ(O–H) = 1.85 / 1.224 ≈ 1.51 D.

NH₃ versus NF₃. Both are pyramidal with one lone pair on N. Yet NH₃ has μ = 1.47 D and NF₃ only about 0.24 D.

  • In NH₃, N is more electronegative than H. The N–H bond dipoles point towards N, the same direction as the lone pair's moment. They add.

  • In NF₃, F is more electronegative than N. The N–F bond dipoles point away from N, opposite to the lone pair's moment. They largely cancel.

MoleculeShapeμ (D)Why
HFLinear1.91Largest electronegativity difference among HX
HClLinear1.03
HBrLinear0.79
HILinear0.38Smallest difference
H₂OBent1.85Bond moments add at 104.5°
NH₃Pyramidal1.47Bond moments and lone pair add
NF₃Pyramidal0.24Bond moments oppose lone pair
CH₃ClTetrahedral1.87One C–Cl not balanced
CH₂Cl₂Tetrahedral1.60Two C–Cl at about 109°
CHCl₃Tetrahedral1.04Three C–Cl partly cancel
CCl₄Tetrahedral0Fully symmetric
CO₂, BF₃, CH₄Linear, planar, tetrahedral0Symmetric

Worked example 3.9 (NEET-hard): Arrange o-, m- and p-dichlorobenzene in decreasing order of dipole moment. Take each C–Cl moment as μ.

Solution: The angles between the two C–Cl bonds are 60° (ortho), 120° (meta) and 180° (para). Resultants: ortho = 2μ cos 30° = 1.73μ; meta = 2μ cos 60° = μ; para = 0. Order: ortho > meta > para. The same logic gives cis-1,2-dichloroethene a dipole moment and the trans isomer zero.

Uses of dipole moment:

  • Telling polar from non-polar molecules.

  • Finding shape: μ = 0 for CO₂ proves it is linear; μ ≠ 0 for H₂O proves it is bent.

  • Distinguishing cis and trans isomers, and o, m, p isomers.

  • Estimating percentage ionic character.

Quick revision

  • Electronegativity: pull of an atom in a molecule on a shared pair. F 4.0 > O 3.5 > N = Cl 3.0.

  • Large electronegativity difference gives ionic bonds; small difference gives polar covalent bonds.

  • Fajans: small, highly charged cation plus large, highly charged anion gives more covalent character. 18-electron cations polarise more than noble gas cations.

  • More covalent character: lower melting point, less soluble in water, more soluble in organic solvents.

  • μ = q × d. 1 D = 3.336 × 10⁻³⁰ C m. It is a vector, arrow from + to − (chemistry convention).

  • % ionic character = μ(observed) / (e × d) × 100.

  • Symmetric molecules (CO₂, BF₃, CCl₄, PCl₅, SF₆, XeF₄) have μ = 0. NH₃ > NF₃. o > m > p dichlorobenzene.

NEET traps

  • Mixing up electronegativity and electron gain enthalpy. Cl gains an electron most exothermically, but F is the most electronegative.

  • Saying CO₂ has non-polar bonds because its μ is zero. Each C=O bond is polar; the vectors cancel.

  • Forgetting the lone pair contribution in NH₃ and NF₃.

  • Applying Fajans' rule to anion size the wrong way. A larger anion is easier to polarise, so LiI is the most covalent lithium halide.

  • Using the physics arrow (− to +) in a chemistry question. NCERT draws the arrow from the positive end to the negative end.

  • Ranking CH₃Cl, CH₂Cl₂, CHCl₃ as if more Cl means more μ. The order is CH₃Cl > CH₂Cl₂ > CHCl₃ > CCl₄.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The most electronegative element is (a) O (b) Cl (c) N (d) F

2. The SI unit of dipole moment is (a) C m⁻¹ (b) C m (c) C m² (d) N m

3. Which molecule has zero dipole moment? (a) CO₂ (b) H₂O (c) NH₃ (d) HCl

4. The polarising power of a cation is greatest when it is (a) large with low charge (b) large with high charge (c) small with high charge (d) small with low charge

5. The most polar bond among these is (a) C–H (b) H–F (c) H–Cl (d) H–I

6. One debye equals (a) 3.336 × 10⁻²⁰ C m (b) 1.602 × 10⁻¹⁹ C m (c) 3.336 × 10⁻²⁷ C m (d) 3.336 × 10⁻³⁰ C m

7. The anion most easily polarised is (a) I⁻ (b) Br⁻ (c) Cl⁻ (d) F⁻

8. The bond in a Cl₂ molecule is (a) ionic (b) polar covalent (c) non-polar covalent (d) coordinate

9. A non-zero dipole moment is shown by (a) BF₃ (b) CH₄ (c) CCl₄ (d) NH₃

10. Electronegativity describes (a) the energy released when an isolated gaseous atom gains an electron (b) the tendency of an atom in a molecule to attract a shared electron pair (c) the charge on an ion in solution (d) the energy needed to remove an electron

Level 2: NEET standard

11. The correct order of increasing covalent character is (a) NaCl < MgCl₂ < AlCl₃ (b) AlCl₃ < MgCl₂ < NaCl (c) MgCl₂ < NaCl < AlCl₃ (d) NaCl < AlCl₃ < MgCl₂

12. The most covalent lithium halide is (a) LiF (b) LiCl (c) LiI (d) LiBr

13. Which statement about NH₃ and NF₃ is correct? (a) NF₃ has the larger dipole moment (b) Both have equal dipole moments (c) NF₃ has zero dipole moment (d) NH₃ has the larger dipole moment

14. Two bond dipoles of 1.5 D each are at 90° to each other. The resultant is (a) 3.0 D (b) 2.12 D (c) 1.5 D (d) 0

15. HCl has a dipole moment of 1.03 D and bond length 127 pm. Its percentage ionic character is about (a) 17% (b) 43% (c) 5% (d) 77%

16. The correct order of dipole moment is (a) HI > HBr > HCl > HF (b) HCl > HF > HBr > HI (c) HF > HCl > HBr > HI (d) HBr > HCl > HF > HI

17. Which molecule is polar even though all its bonds are identical? (a) BF₃ (b) H₂O (c) CCl₄ (d) SF₆

18. CuCl is more covalent than NaCl because (a) Cu⁺ is much larger than Na⁺ (b) Cl⁻ is smaller in CuCl (c) Cu is more electropositive than Na (d) Cu⁺ has an 18-electron outer shell that shields its nucleus poorly

19. The correct order of dipole moments of dichlorobenzenes is (a) ortho > meta > para (b) para > meta > ortho (c) meta > ortho > para (d) all are equal

20. H₂O has μ = 1.85 D and bond angle 104.5°. Ignoring lone pairs, the O–H bond moment is about (a) 0.93 D (b) 1.85 D (c) 1.51 D (d) 3.02 D

21. By Fajans' rules, the lowest melting point is expected for (a) NaCl (b) AlCl₃ (c) MgCl₂ (d) KCl

22. The dipole moment of trans-1,2-dichloroethene is (a) greater than that of the cis isomer (b) equal to that of the cis isomer (c) about 1.9 D (d) zero

Level 3: Challenge

23. Charges of +0.5e and −0.5e are 100 pm apart. The dipole moment is about (a) 4.8 D (b) 1.2 D (c) 2.4 D (d) 0.24 D

24. The highest dipole moment among these is shown by (a) CH₃Cl (b) CH₂Cl₂ (c) CHCl₃ (d) CCl₄

25. The correct order of solubility in water is (a) AgI > AgBr > AgCl > AgF (b) AgCl > AgF > AgBr > AgI (c) AgBr > AgI > AgCl > AgF (d) AgF > AgCl > AgBr > AgI

26. Which molecule has a non-zero dipole moment? (a) XeF₄ (b) SF₄ (c) PCl₅ (d) BeF₂

27. KBr in the gas phase has μ = 10.4 D and bond length 282 pm. Its percentage ionic character is about (a) 50% (b) 100% (c) 77% (d) 13%

28. Two equal bond moments of 1.2 D are at 120°. The resultant is (a) 1.2 D (b) 2.4 D (c) 0 (d) 2.08 D

29. Assertion (A): BeCl₂ is more ionic than MgCl₂. Reason (R): Be²⁺ is smaller than Mg²⁺. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: CO₂ has zero dipole moment because its C=O bonds are non-polar. Statement II: Electronegativity is a fixed, directly measurable property of an isolated atom. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dF has the highest Pauling value, 4.0.
2bμ = charge × distance.
3aLinear; equal and opposite bond dipoles.
4cHigh charge density polarises most.
5bLargest electronegativity difference (1.9).
6dStandard conversion.
7aLargest anion, loosely held electrons.
8cIdentical atoms share equally.
9dPyramidal; moments do not cancel.
10bDefinition; (a) is electron gain enthalpy.
11aCation charge rises and size falls.
12cI⁻ is the largest, most polarisable anion.
13dIn NF₃ bond moments oppose the lone pair.
14b2 × 1.5 × cos 45° = 2.12.
15a1.03 / 6.10 × 100 ≈ 16.9%.
16cFollows electronegativity difference.
17bBent shape; moments add.
18dPseudo noble gas core polarises more.
19aAngles 60°, 120°, 180°.
20c1.85 / (2 × cos 52.25°) ≈ 1.51.
21bAl³⁺ is most polarising; AlCl₃ is covalent.
22dC–Cl moments are opposite and cancel.
23c8.01 × 10⁻³¹ C m / 3.336 × 10⁻³⁰ = 2.40 D.
24aOne unbalanced C–Cl; more Cl means more cancellation.
25dCovalent character rises F⁻ to I⁻; solubility falls.
26bSee-saw shape is unsymmetrical.
27ce × d = 13.5 D; 10.4 / 13.5 ≈ 77%.
28a2 × 1.2 × cos 60° = 1.2.
29dSmall Be²⁺ makes BeCl₂ more covalent.
30bC=O bonds are polar; electronegativity is a relative scale.

Chapter 3 revision sheet

One-page summary

  • Electronegativity (EN) is an atom's pull on a shared pair; it is a relative number, not a directly measured energy.

  • Pauling values to know: F 4.0, O 3.5, N 3.0, Cl 3.0, C 2.5, H 2.1.

  • EN rises across a period and falls down a group.

  • Equal EN → non-polar bond (H₂, Cl₂); unequal EN → polar bond with partial charges δ+ and δ−.

  • Larger EN difference → more ionic character; no real bond is 100% ionic.

  • Fajans' rules: covalent character rises with a small cation, a high cation charge, a large anion, and a cation with an 18-electron (pseudo-noble-gas) shell such as Cu⁺ or Ag⁺.

  • So LiI > LiCl > LiF and AlCl₃ > MgCl₂ > NaCl in covalent character; CuCl is more covalent than NaCl.

  • Dipole moment μ = charge × distance; it is a vector, drawn from the positive end to the negative end.

  • Units: debye (D); 1 D = 10⁻¹⁸ esu cm = 3.336 × 10⁻³⁰ C m.

  • Molecular dipole = vector sum of bond dipoles and lone-pair moments.

  • Zero dipole: symmetric shapes with identical outer atoms (CO₂, BF₃, CH₄, CCl₄, PCl₅, SF₆) and XeF₂, XeF₄.

  • NH₃ (1.47 D) > NF₃ (0.23 D): lone-pair moment adds to N–H dipoles but opposes N–F dipoles.

  • Dichlorobenzenes: ortho > meta > para (para = 0).

  • Percentage ionic character = (observed μ / μ for full transfer) × 100.

μ=q×dμresultant=μ12+μ22+2μ1μ2cos⁡θ% ionic=μobsμionic×100\mu = q \times d \qquad \mu_{\text{resultant}} = \sqrt{\mu_1^2 + \mu_2^2 + 2\mu_1\mu_2\cos\theta} \qquad \%\ \text{ionic} = \frac{\mu_{\text{obs}}}{\mu_{\text{ionic}}} \times 100

Must-remember table

MoleculeDipole moment (D)Why
H₂O1.85Bent; bond and lone-pair moments add
NH₃1.47Lone-pair moment in the same direction as N–H moments
NF₃0.23Lone-pair moment opposes N–F moments
HCl1.03About 17% ionic character
CH₃Cl > CH₂Cl₂ > CHCl₃ > CCl₄Decreasing; CCl₄ = 0More symmetric as Cl count rises
CO₂, BF₃, CCl₄, XeF₄0Bond dipoles cancel
o- / m- / p-C₆H₄Cl₂About 2.5 / 1.5 / 0Angle between C–Cl moments: 60° / 120° / 180°

Memory aids

  • "Some Hungry Bears Prowl" for Fajans' rules: Small cation, High cation charge, Big anion, Pseudo-noble-gas (18-electron) cation → more covalent.

  • "In NH₃ the lone pair Helps; in NF₃ it Fights": lone-pair moment adds to N–H dipoles but opposes N–F dipoles.

  • "One More Point": dipole order Ortho > Meta > Para for disubstituted benzenes with identical groups.

  • "Same atoms + no lone pair on centre = zero": a quick zero-dipole test.

Concept connections

  • Electronegativity trends come from Chemistry Book 9: Classification of Elements and Periodicity in Properties.

  • Bond polarity drives the inductive effect in Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • Covalent character of AlCl₃ and the halides of heavy p-block elements returns in Chemistry Book 10: p-Block Elements.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (molecule) with List II (dipole moment in D).

  • List I: A. NH₃ · B. NF₃ · C. H₂O · D. BF₃

  • List II: (i) 0 · (ii) 0.23 · (iii) 1.47 · (iv) 1.85

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-i, C-iv, D-ii

32. Match List I (compound) with List II (main reason for its covalent character).

  • List I: A. LiI · B. AlCl₃ · C. CuCl · D. NaCl

  • List II: (i) Cation with an 18-electron outer shell · (ii) Small cation with a large, easily distorted anion · (iii) Low polarising power; mainly ionic · (iv) High charge on a small cation

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-iii, D-i

33. Match List I (molecule) with List II (reason for its net dipole).

  • List I: A. CO₂ · B. H₂O · C. CCl₄ · D. CHCl₃

  • List II: (i) Bent shape; bond dipoles add · (ii) Tetrahedral but bonds unequal; net dipole · (iii) Linear; two bond dipoles cancel · (iv) Tetrahedral; four equal bond dipoles cancel

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iv, B-i, C-iii, D-ii

34. Match List I (quantity) with List II (value or unit).

  • List I: A. SI unit of dipole moment · B. 1 debye in SI · C. Charge on an electron · D. 1 debye in CGS

  • List II: (i) 1.602 × 10⁻¹⁹ C · (ii) C m · (iii) 10⁻¹⁸ esu cm · (iv) 3.336 × 10⁻³⁰ C m

(a) A-ii, B-iii, C-i, D-iv (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i

35. How many of the following statements are correct?

  • A. NF₃ has a smaller dipole moment than NH₃ because its lone-pair moment opposes the bond moments.

  • B. BeF₂ (gas) has zero dipole moment.

  • C. p-Dichlorobenzene has a larger dipole moment than o-dichlorobenzene.

  • D. A molecule with polar bonds can still have zero dipole moment.

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of statements based on Fajans' rules.

  • A. A smaller cation gives more covalent character.

  • B. A smaller anion gives more covalent character.

  • C. A higher cation charge gives more covalent character.

  • D. Ag⁺ salts are more covalent than K⁺ salts of similar size because Ag⁺ has an 18-electron shell.

(a) A and C only (b) A, C and D only (c) B and D only (d) A, B, C and D

37. Choose the correct set of statements about electronegativity.

  • A. On the Pauling scale, fluorine has the value 4.0.

  • B. It generally increases across a period.

  • C. It generally increases down a group.

  • D. A larger electronegativity difference gives a more polar bond.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

38. How many statements about hydrogen halides are correct?

  • A. Bond polarity: H–F > H–Cl > H–Br > H–I.

  • B. HI has the least ionic character among them.

  • C. HCl is 100% ionic in the gas phase.

  • D. HCl has a larger dipole moment than HBr.

(a) One (b) Two (c) Four (d) Three

39. HCl has a dipole moment of 1.03 D and a bond length of 127 pm. Taking the electronic charge as 4.8 × 10⁻¹⁰ esu, its percentage ionic character is closest to (a) 6.1% (b) 83% (c) 59% (d) 17%

40. A bar chart shows the dipole moments of four chloromethanes as P = 1.9 D, Q = 1.6 D, R = 1.0 D and S = 0 D. Which identification is correct? (a) P = CH₃Cl, S = CCl₄ (b) P = CCl₄, S = CH₃Cl (c) P = CHCl₃, S = CH₂Cl₂ (d) P = CH₂Cl₂, S = CHCl₃

41. The table gives Pauling electronegativity differences for four bonds.

BondEN difference
C–H0.4
O–H1.4
H–F1.9
Na–Cl2.1

Which bond is the most ionic, and which is closest to non-polar? (a) O–H; H–F (b) H–F; O–H (c) Na–Cl; C–H (d) H–F; C–H

Case for Q42–Q43: A student measures the dipole moments of the three dichlorobenzene isomers and labels them X (2.5 D), Y (1.5 D) and Z (0 D). She treats each C–Cl bond moment as 1.5 D and adds them as vectors.

42. Isomer Z is (a) para (b) ortho (c) meta (d) impossible to identify

43. Using a 60° angle between the two C–Cl moments in the ortho isomer, the calculated resultant is closest to (a) 3.0 D (b) 2.6 D (c) 1.5 D (d) 0.75 D

44. Which molecule has zero dipole moment? (a) SF₄ (b) XeF₄ (c) ClF₃ (d) NH₃

45. Which compound has the greatest covalent character? (a) LiF (b) KF (c) NaI (d) LiI

Level 4 answer key

QAnsReason
31cNH₃ 1.47, NF₃ 0.23, H₂O 1.85, BF₃ 0
32bEach compound matched to its Fajans factor
33aShape decides whether bond dipoles cancel
34c1 D = 10⁻¹⁸ esu cm = 3.336 × 10⁻³⁰ C m
35cA, B, D true; para isomer has zero moment
36bA larger, not smaller, anion is more polarisable
37aEN falls down a group
38dA, B, D true; no real bond is 100% ionic
39dμ(ionic) = 4.8 × 10⁻¹⁰ × 1.27 × 10⁻⁸ = 6.10 D; 1.03/6.10 × 100 = 16.9%
40aOrder CH₃Cl > CH₂Cl₂ > CHCl₃ > CCl₄
41cLargest difference 2.1, smallest 0.4
42aIn para, the two moments are at 180° and cancel
43b2 × 1.5 × cos 30° = 2.60 D
44bSquare planar XeF₄: bond and lone-pair moments cancel
45dSmallest cation with the largest anion
22 min left
‹
›