Chapter 4 of 12 · 25 min read

Chapter 2: Ionic Bonding and Lattice Enthalpy

What you will learn

  • The three energy steps behind the formation of an ionic bond.

  • The factors that make ionic bond formation easy or hard.

  • What lattice enthalpy is, and how ion size and charge control it.

  • How to build and solve a Born–Haber cycle for compounds like NaCl, KCl and MgO.

  • The typical properties of ionic solids and why they arise.

2.1 How an ionic bond forms

An ionic bond forms when one atom gives one or more electrons to another, and the resulting ions attract each other. On paper it looks like a simple swap. In energy terms it is three steps:

  1. The metal atom loses electrons to form a cation. This costs energy (ionisation enthalpy, always positive).

  2. The non-metal atom gains electrons to form an anion. This may release energy (first electron gain enthalpy of Cl is negative) or cost it (adding a second electron to O⁻ is positive).

  3. The gaseous cations and anions come together to form a crystal lattice. This releases a large amount of energy.

For sodium and chlorine in the gas phase:

Na(g)→Na+(g)+e−ΔiH=+495.8 kJ mol−1\mathrm{Na(g) \rightarrow Na^{+}(g) + e^{-}} \qquad \Delta_i H = +495.8\ \mathrm{kJ\,mol^{-1}}
Cl(g)+e−→Cl−(g)ΔegH=−348.6 kJ mol−1\mathrm{Cl(g) + e^{-} \rightarrow Cl^{-}(g)} \qquad \Delta_{eg} H = -348.6\ \mathrm{kJ\,mol^{-1}}

The sum is +147.2 kJ mol⁻¹. So making a pair of gaseous ions from gaseous atoms is uphill. The ions would not form if the story ended here. What pays the bill is step 3: the energy released when the ions pack into a lattice. Like a cricket team that loses money on travel but wins it back in the prize, the lattice energy turns the overall process downhill.

2.2 Factors that favour ionic bond formation

FactorWhat helps ionic bondingExample
Ionisation enthalpy of the metalLow (cation forms easily)Cs, K, Na form ionic compounds readily
Electron gain enthalpy of the non-metalLarge negative value (anion forms easily)F, Cl, O
Lattice enthalpyHigh (small ions, high charges)MgO, CaF₂, LiF
Electronegativity differenceLarge (roughly above 1.7 on the Pauling scale)NaCl (2.1), CsF (3.2)

So group 1 and 2 metals combine with groups 16 and 17 to give ionic compounds. Elements with high ionisation enthalpies, such as Be or Al, tend to give compounds with considerable covalent character. Chapter 3 explains why.

2.3 Lattice enthalpy

Lattice enthalpy of an ionic solid is the enthalpy change when one mole of the solid is completely separated into its gaseous ions. It is positive (energy must be supplied).

NaCl(s)→Na+(g)+Cl−(g)ΔlatticeH=+788 kJ mol−1\mathrm{NaCl(s) \rightarrow Na^{+}(g) + Cl^{-}(g)} \qquad \Delta_{\text{lattice}} H = +788\ \mathrm{kJ\,mol^{-1}}

Some books define it the other way, as the energy released when gaseous ions form one mole of the solid. Then it carries a negative sign. The size is the same. In this book lattice enthalpy is always the positive, breaking-up value, as NCERT uses.

Lattice enthalpy cannot be measured directly. We get it indirectly from a Born–Haber cycle (Section 2.4).

What controls lattice enthalpy. The attraction between two ions follows Coulomb's law. The lattice energy is roughly proportional to the product of the ionic charges and inversely proportional to the distance between ion centres:

ΔlatticeH∝z+ z−r++r−\Delta_{\text{lattice}} H \propto \frac{z_{+}\, z_{-}}{r_{+} + r_{-}}
  • Charge: doubling both charges multiplies z₊ z₋ by 4. MgO (2+, 2−) has a lattice enthalpy about four times that of NaF (1+, 1−), though their ion distances are similar.

  • Size: smaller ions sit closer, so attraction is stronger. LiF > NaF > KF, and NaF > NaCl > NaBr > NaI.

CompoundIon chargesApprox. lattice enthalpy (kJ mol⁻¹)
MgO2+, 2−3850
CaO2+, 2−3460
MgF₂2+, 1−2960
LiF1+, 1−1040
NaF1+, 1−925
NaCl1+, 1−788
NaBr1+, 1−750
KCl1+, 1−717
NaI1+, 1−705

Values are rounded; different sources differ by a few kJ mol⁻¹. In NEET you need the order, not the exact figure.

2.4 The Born–Haber cycle

Hess's law says the total enthalpy change of a reaction is the same whatever path is taken. Born and Haber used this to find lattice enthalpy. We compare two paths from the elements to the ionic solid.

  • Direct path: Na(s) + ½Cl₂(g) → NaCl(s). Its enthalpy is the standard enthalpy of formation, ΔfH° = −411.2 kJ mol⁻¹.

  • Step-by-step path: turn the elements into gaseous atoms, then gaseous ions, then let the ions form the lattice.

StepProcessNameΔH (kJ mol⁻¹)
1Na(s) → Na(g)Sublimation enthalpy+108.4
2½Cl₂(g) → Cl(g)Half the bond dissociation enthalpy+121.0
3Na(g) → Na⁺(g) + e⁻First ionisation enthalpy+495.8
4Cl(g) + e⁻ → Cl⁻(g)Electron gain enthalpy−348.6
5Na⁺(g) + Cl⁻(g) → NaCl(s)Minus the lattice enthalpy−U
Figure 2.1 · Born–Haber cycle for NaCl
Figure 2.1 · Born–Haber cycle for NaCl

Read the steps left to right: four uphill steps take the elements to gaseous ions, and the long lattice drop more than pays them back, ending 411.2 kJ mol⁻¹ below the start.

By Hess's law, steps 1 to 5 must add up to ΔfH°:

ΔfH∘=ΔsubH+12ΔdissH+ΔiH+ΔegH−U\Delta_f H^{\circ} = \Delta_{sub} H + \tfrac{1}{2}\Delta_{diss} H + \Delta_i H + \Delta_{eg} H - U
U=−ΔfH∘+ΔsubH+12ΔdissH+ΔiH+ΔegHU = -\Delta_f H^{\circ} + \Delta_{sub} H + \tfrac{1}{2}\Delta_{diss} H + \Delta_i H + \Delta_{eg} H

Putting in the numbers for NaCl:

U=411.2+108.4+121.0+495.8−348.6=787.8≈788 kJ mol−1U = 411.2 + 108.4 + 121.0 + 495.8 - 348.6 = 787.8 \approx 788\ \mathrm{kJ\,mol^{-1}}

A good way to remember the cycle: every step that breaks something (solid to gas, molecule to atoms, atom to ion) is uphill. Only the electron gain (first one) and the lattice formation are downhill.

Worked example 2.1: Using the NaCl data above, find the enthalpy change for Na(g) + Cl(g) → Na⁺(g) + Cl⁻(g). Is it favourable on its own?

Solution: ΔH = ΔiH + ΔegH = 495.8 + (−348.6) = +147.2 kJ mol⁻¹. It is endothermic, so ion formation in the gas phase is not favourable by itself. The lattice enthalpy (788) more than repays this cost.

Worked example 2.2: For KCl: sublimation enthalpy of K = +89, ionisation enthalpy of K = +419, ½ bond dissociation enthalpy of Cl₂ = +121, electron gain enthalpy of Cl = −349, ΔfH°(KCl) = −437 (all kJ mol⁻¹). Find the lattice enthalpy of KCl.

Solution: U = −ΔfH° + sub + IE + ½D + EGE = 437 + 89 + 419 + 121 − 349 = 717 kJ mol⁻¹. It is lower than NaCl (788) because K⁺ is larger than Na⁺.

Worked example 2.3: The lattice enthalpy of NaCl is 788 kJ mol⁻¹. Sublimation of Na = 108, IE of Na = 496, ½D(Cl₂) = 121 and ΔfH°(NaCl) = −411 (kJ mol⁻¹). Find the electron gain enthalpy of chlorine.

Solution: ΔfH° = sub + IE + ½D + EGE − U. So EGE = ΔfH° − sub − IE − ½D + U = −411 − 108 − 496 − 121 + 788 = −348 kJ mol⁻¹.

Worked example 2.4: Why does Na form NaCl and not NaCl₂? The second ionisation enthalpy of Na is about 4562 kJ mol⁻¹.

Solution: Removing a second electron from Na⁺ means breaking into the stable neon core. It costs about 4562 kJ mol⁻¹. The extra lattice enthalpy gained by forming a 2+ ion is far less than this. So ΔfH° of NaCl₂ would be strongly positive, and the compound does not form.

Worked example 2.5: Arrange LiF, NaCl, KCl and MgO in increasing order of lattice enthalpy. Give the reason.

Solution: MgO has ions with charges 2+ and 2−, so it is far ahead of the rest. Among the 1+/1− salts, LiF has the smallest ions, then NaCl, then KCl (K⁺ larger than Na⁺). Increasing order: KCl < NaCl < LiF < MgO.

Worked example 2.6: For MgO: sublimation of Mg = +148, first IE of Mg = +738, second IE = +1451, ½ bond dissociation of O₂ = +249, first electron gain enthalpy of O = −141, second electron gain enthalpy of O = +798, ΔfH°(MgO) = −602 (kJ mol⁻¹). Find the lattice enthalpy.

Solution: Both ionisation steps and both electron-gain steps must be included.

U=602+148+(738+1451)+249+(−141+798)=3845 kJ mol−1U = 602 + 148 + (738 + 1451) + 249 + (-141 + 798) = 3845\ \mathrm{kJ\,mol^{-1}}

Forming O²⁻(g) from O(g) costs −141 + 798 = +657 kJ mol⁻¹, and Mg²⁺ costs 2189 kJ mol⁻¹. Even so, MgO is very stable, because its lattice enthalpy (about 3845) is huge.

Worked example 2.7 (NEET-hard): MgO and NaF have nearly the same distance between ion centres (about 210 pm and 231 pm). Estimate the ratio of their lattice enthalpies, and compare it with the data (3850 and 925).

Solution: The charge product for MgO is 2 × 2 = 4; for NaF it is 1 × 1 = 1. With the shorter distance in MgO, the ratio should be a little more than 4. The data give 3850 / 925 ≈ 4.2. The charge effect dominates.

2.5 Properties of ionic compounds

PropertyTypical behaviourReason
Physical stateCrystalline solids at room temperatureIons held in a regular 3-D lattice
Melting and boiling pointsHigh (NaCl melts at 801 °C, MgO above 2800 °C)Strong attraction in all directions must be overcome
Electrical conductionPoor as solid; good when molten or dissolvedIons are fixed in the solid but free to move in melt or solution
SolubilityMany dissolve in water and other polar solvents; insoluble in non-polar ones like benzenePolar water molecules surround and stabilise the ions
HardnessHard but brittleA small shift brings like charges face to face; they repel and the crystal cracks
Bond directionNon-directionalEach ion attracts all oppositely charged neighbours equally

In the NaCl crystal, each Na⁺ is surrounded by 6 Cl⁻ ions and each Cl⁻ by 6 Na⁺. There are no separate NaCl molecules. The formula only gives the ratio of ions.

Table salt sprinkled on a wet plate dissolves. Rock salt sitting in a pressure cooker on the stove never melts. Both facts come from the same lattice.

Quick revision

  • Ionic bond = electrostatic attraction between cations and anions in a lattice.

  • Favoured by low ionisation enthalpy of the metal, large negative electron gain enthalpy of the non-metal, and high lattice enthalpy.

  • Lattice enthalpy: energy to separate one mole of ionic solid into gaseous ions; taken as positive.

  • Lattice enthalpy rises with ionic charge (product z₊ z₋) and falls with ion size.

  • Born–Haber cycle: ΔfH° = sub + ½D + IE + EGE − U. For NaCl, U ≈ 788 kJ mol⁻¹.

  • Gas-phase ion formation is usually endothermic; lattice enthalpy makes the overall process exothermic.

  • Ionic solids: high melting points, brittle, conduct only when molten or dissolved, soluble in polar solvents.

NEET traps

  • Using the full bond dissociation enthalpy of Cl₂ for one mole of NaCl. Only ½ Cl₂ is needed, so use half.

  • Forgetting the second electron gain enthalpy of O (positive) or the second ionisation enthalpy of Mg in the MgO cycle.

  • Mixing up the sign convention of lattice enthalpy. Check whether the question gives it as energy released or energy absorbed.

  • Thinking that ion formation itself is exothermic. For NaCl, Na(g) + Cl(g) → ions costs +147 kJ mol⁻¹.

  • Saying ionic solids conduct electricity. They conduct only when ions are free to move.

  • Ranking lattice enthalpy only by size and ignoring charge: MgO beats LiF even though Li⁺ is smaller than Mg²⁺.

Practice MCQs: Chapter 2

Level 1: Concept check

1. Lattice enthalpy is the enthalpy change for (a) forming one mole of an ionic solid from its elements (b) converting one mole of gaseous atoms into ions (c) completely separating one mole of an ionic solid into gaseous ions (d) dissolving one mole of an ionic solid in water

2. Formation of an ionic bond is favoured when the metal atom has (a) low ionisation enthalpy (b) high ionisation enthalpy (c) high electronegativity (d) a large negative electron gain enthalpy

3. Which step in the Born–Haber cycle of NaCl releases energy? (a) Sublimation of Na (b) Ionisation of Na (c) Dissociation of Cl₂ (d) Electron gain by Cl

4. The highest lattice enthalpy among these is shown by (a) NaCl (b) MgO (c) KCl (d) NaBr

5. Ionic compounds conduct electricity (a) in the solid state (b) under no conditions (c) when molten or in aqueous solution (d) only in the solid state at high pressure

6. An ionic bond is (a) non-directional (b) directional (c) formed by sharing electrons (d) formed only between non-metals

7. Lattice enthalpy is high for ions that are (a) large and low-charged (b) large and high-charged (c) small and low-charged (d) small and high-charged

8. The bond dissociation enthalpy of Cl₂ is 242 kJ mol⁻¹. The value used for this step in the Born–Haber cycle of NaCl is (a) 242 (b) 121 (c) 484 (d) 60.5

9. The Born–Haber cycle is an application of (a) Hess's law (b) Le Chatelier's principle (c) Boyle's law (d) Avogadro's law

10. The Ca²⁺ ion has the electronic configuration of (a) Ne (b) Kr (c) Ar (d) He

Level 2: NEET standard

11. The correct order of lattice enthalpy is (a) NaI > NaBr > NaCl > NaF (b) NaF > NaCl > NaBr > NaI (c) NaCl > NaF > NaBr > NaI (d) NaBr > NaCl > NaF > NaI

12. For KCl: sublimation of K = 89, IE of K = 419, ½D(Cl₂) = 121, electron gain enthalpy of Cl = −349 and ΔfH° = −437 (kJ mol⁻¹). The lattice enthalpy of KCl (kJ mol⁻¹) is (a) 1415 (b) 543 (c) 788 (d) 717

13. Given for NaCl: sublimation of Na = 108, IE of Na = 496, ½D(Cl₂) = 121, lattice enthalpy = 788 and ΔfH° = −411 (kJ mol⁻¹). The electron gain enthalpy of Cl (kJ mol⁻¹) is (a) −348 (b) +348 (c) −474 (d) −1170

14. MgO forms readily even though forming O²⁻(g) from O(g) is endothermic. This is because (a) Mg has a very low ionisation enthalpy (b) oxygen is a small atom (c) the very large lattice enthalpy of MgO outweighs the costs (d) MgO is a covalent compound

15. Using ΔiH(Na) = +496 and ΔegH(Cl) = −349 kJ mol⁻¹, the enthalpy change for Na(g) + Cl(g) → Na⁺(g) + Cl⁻(g) is (a) −147 kJ mol⁻¹ (b) +147 kJ mol⁻¹ (c) +845 kJ mol⁻¹ (d) −845 kJ mol⁻¹

16. Which compound does not form because the extra ionisation enthalpy cannot be repaid by lattice enthalpy? (a) MgCl₂ (b) CaO (c) Na₂O (d) NaCl₂

17. For LiF: ΔfH° = −616, sublimation of Li = 161, IE of Li = 520, ½D(F₂) = 79, electron gain enthalpy of F = −328 (kJ mol⁻¹). The lattice enthalpy of LiF (kJ mol⁻¹) is (a) 1048 (b) 1704 (c) 392 (d) 432

18. MgO and NaF have similar interionic distances. The ratio of their lattice enthalpies (MgO : NaF) is closest to (a) 1 : 1 (b) 2 : 1 (c) 4 : 1 (d) 8 : 1

19. Which property is NOT typical of ionic compounds? (a) High melting point (b) Brittleness (c) Solubility in water (d) Electrical conduction in the solid state

20. An ionic bond forms most readily between (a) Li and I (b) Cs and F (c) Be and Cl (d) Al and I

21. For CsCl: sublimation of Cs = 76, IE of Cs = 376, ½D(Cl₂) = 121, electron gain enthalpy of Cl = −349 and lattice enthalpy = 657 (kJ mol⁻¹). The standard enthalpy of formation of CsCl (kJ mol⁻¹) is (a) −433 (b) −1131 (c) +265 (d) −224

22. In the NaCl crystal, the number of Cl⁻ ions nearest to each Na⁺ is (a) 4 (b) 8 (c) 6 (d) 12

Level 3: Challenge

23. For KBr: ΔfH° = −394, sublimation of K = 89, enthalpy for ½Br₂(l) → Br(g) = 112, electron gain enthalpy of Br = −325 and lattice enthalpy = 689 (kJ mol⁻¹). The ionisation enthalpy of K (kJ mol⁻¹) is (a) 643 (b) 195 (c) 1243 (d) 419

24. The correct order of lattice enthalpy is (a) NaCl > KCl > MgO > CaO (b) MgO > CaO > NaCl > KCl (c) CaO > MgO > KCl > NaCl (d) MgO > NaCl > CaO > KCl

25. With U as the (positive) lattice enthalpy, the standard enthalpy of formation of NaCl equals (a) ΔsubH + ΔiH + ½ΔdissH + ΔegH − U (b) ΔsubH + ΔiH + ½ΔdissH + ΔegH + U (c) ΔsubH − ΔiH + ½ΔdissH − ΔegH − U (d) U − ΔsubH − ΔiH

26. For MgO: sublimation of Mg = 148, IE₁ = 738, IE₂ = 1451, ½D(O₂) = 249, first electron gain enthalpy of O = −141, second electron gain enthalpy of O = +798, ΔfH° = −602 (kJ mol⁻¹). The lattice enthalpy of MgO (kJ mol⁻¹) is (a) 2249 (b) 3047 (c) 3845 (d) 2394

27. First electron gain enthalpy of O = −141 and second = +798 kJ mol⁻¹. The enthalpy change for O(g) + 2e⁻ → O²⁻(g) is (a) −939 kJ mol⁻¹ (b) +657 kJ mol⁻¹ (c) −657 kJ mol⁻¹ (d) +939 kJ mol⁻¹

28. The highest melting point is expected for (a) NaCl (b) KCl (c) NaBr (d) MgO

29. Assertion (A): NaCl has a higher melting point than KCl. Reason (R): Potassium is more electropositive than sodium. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The lattice enthalpy of CaF₂ is greater than that of NaF. Statement II: Forming Na⁺(g) and Cl⁻(g) from Na(g) and Cl(g) is an endothermic process. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cDefinition: solid to gaseous ions.
2aCation forms easily when IE is low.
3dFirst electron gain of Cl is −348.6 kJ mol⁻¹.
4b2+ and 2− charges give the largest attraction.
5cIons must be free to move.
6aEach ion attracts all neighbours equally.
7dLattice enthalpy rises with z₊z₋ and falls with distance.
8bOnly ½ Cl₂ is needed: 242/2.
9aEnthalpy change is path-independent.
10cCa²⁺ has 18 electrons, like Ar.
11bAnion size grows F⁻ < Cl⁻ < Br⁻ < I⁻.
12d437 + 89 + 419 + 121 − 349 = 717.
13a−411 − 108 − 496 − 121 + 788 = −348.
14cLattice enthalpy of MgO is about 3850 kJ mol⁻¹.
15b496 − 349 = +147.
16dSecond IE of Na (about 4562) is far too high.
17a616 + 161 + 520 + 79 − 328 = 1048.
18cCharge product 4 versus 1.
19dIons are fixed in the solid.
20bLowest IE metal with most electronegative non-metal.
21a76 + 376 + 121 − 349 − 657 = −433.
22cNaCl has 6 : 6 coordination.
23dIE = −394 − 89 − 112 + 325 + 689 = 419.
24bCharge first (MgO, CaO), then size (Mg²⁺ < Ca²⁺, Na⁺ < K⁺).
25aHess's law with −U for lattice formation.
26c602 + 148 + 2189 + 249 + 657 = 3845.
27b−141 + 798 = +657.
28dHighest lattice enthalpy (2+, 2− ions).
29bBoth true; the real reason is smaller Na⁺ giving higher lattice enthalpy.
30aCa²⁺ doubles the charge; ion formation costs +147 kJ mol⁻¹.

Chapter 2 revision sheet

One-page summary

  • An ionic bond is the electrostatic attraction between cations and anions packed in a three-dimensional lattice; there are no separate molecules.

  • Three steps decide ionic bond formation: ionisation of the metal, electron gain by the non-metal, and packing of ions into the lattice.

  • Favoured by low ionisation enthalpy, large negative electron gain enthalpy and high lattice enthalpy.

  • Making gaseous ions is usually endothermic (Na: +496, Cl: −349 → net +147 kJ mol⁻¹); lattice enthalpy pays the bill.

  • Lattice enthalpy: energy needed to separate one mole of solid into gaseous ions far apart; taken as positive.

  • Lattice enthalpy rises with the charge product z₊ z₋ and falls as the interionic distance (r₊ + r₋) grows.

  • Charge beats size: MgO (about 3800 kJ mol⁻¹) is far above NaCl (788 kJ mol⁻¹).

  • Born–Haber cycle applies Hess's law: the direct route and the stepwise route have the same total enthalpy.

  • Second electron gain enthalpy of O is positive; MgO and CaO still form because their lattice enthalpies are huge.

  • Na does not form Na²⁺ in compounds: the second ionisation enthalpy breaks a noble-gas core and is too large to repay.

  • Ionic solids: high melting points, hard but brittle, conduct when molten or in solution, usually soluble in water.

  • Brittleness: a small shift brings like charges face to face and the crystal cracks.

ΔfH∘=ΔsubH+12ΔdissH+ΔiH+ΔegH−UU∝z+z−r++r−\Delta_f H^\circ = \Delta_{sub}H + \tfrac{1}{2}\Delta_{diss}H + \Delta_i H + \Delta_{eg}H - U \qquad U \propto \frac{z_+ z_-}{r_+ + r_-}

Must-remember table

Quantity (for NaCl unless stated)Value / signNote
Sublimation of Na+108 kJ mol⁻¹Endothermic
Ionisation enthalpy of Na+496 kJ mol⁻¹Endothermic
½ bond dissociation of Cl₂+121 kJ mol⁻¹Endothermic
Electron gain enthalpy of Cl−349 kJ mol⁻¹Exothermic
Lattice enthalpy of NaCl788 kJ mol⁻¹Released when the lattice forms
Second electron gain of OPositive (about +780 to +800 kJ mol⁻¹)Repulsion from O⁻
Lattice enthalpy orderMgO > CaO > LiF > NaF > NaCl > KCl > KBrCharge first, then size
Coordination in NaCl6 : 6Each ion has six opposite neighbours

Memory aids

  • "Some Dogs Itch Every Lunchtime": Born–Haber steps in order: Sublimation, Dissociation (half), Ionisation, Electron gain, Lattice formation.

  • "Charge Counts, Size Spoils": higher ionic charge raises lattice enthalpy; larger ions lower it.

  • "Hot Bricks Melt Slowly": ionic solids have High melting points, are Brittle, conduct when Molten, and are Soluble in water.

Concept connections

  • The Born–Haber cycle is Hess's law from Chemistry Book 4: Chemical Thermodynamics.

  • Ionisation enthalpy and electron gain enthalpy trends come from Chemistry Book 9: Classification of Elements and Periodicity in Properties.

  • Dissolving an ionic solid (lattice vs hydration enthalpy) links to Chemistry Book 5: Solutions.

Practice MCQs: Chapter 2, Level 4 (new NEET pattern)

31. Match List I (compound) with List II (approximate lattice enthalpy in kJ mol⁻¹).

  • List I: A. NaCl · B. MgO · C. KCl · D. LiF

  • List II: (i) 717 · (ii) 788 · (iii) 1030 · (iv) 3800

(a) A-iii, B-iv, C-i, D-ii (b) A-ii, B-iii, C-i, D-iv (c) A-i, B-iv, C-ii, D-iii (d) A-ii, B-iv, C-i, D-iii

32. Match List I (step in the Born–Haber cycle of NaCl) with List II (name of the enthalpy change).

  • List I: A. Na(s) → Na(g) · B. ½Cl₂(g) → Cl(g) · C. Na(g) → Na⁺(g) + e⁻ · D. Na⁺(g) + Cl⁻(g) → NaCl(s)

  • List II: (i) Half of bond dissociation enthalpy · (ii) Negative of lattice enthalpy · (iii) Sublimation enthalpy · (iv) Ionisation enthalpy

(a) A-iii, B-iv, C-i, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-i, C-ii, D-iv

33. Match List I (property of ionic solids) with List II (reason).

  • List I: A. High melting point · B. Brittleness · C. Conducts when molten · D. Soluble in water

  • List II: (i) Ions become free to move · (ii) Strong attractions act in all directions through the lattice · (iii) Hydration enthalpy makes up for lattice enthalpy · (iv) A shift of layers brings like charges together

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-iii, D-i

34. Match List I (compound) with List II (charge product z₊ × z₋, ignoring signs).

  • List I: A. CaO · B. AlN · C. KBr · D. MgCl₂

  • List II: (i) 1 · (ii) 2 · (iii) 4 · (iv) 9

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-iii, B-iv, C-i, D-ii

35. How many of the following statements are correct?

  • A. Lattice enthalpy increases as ionic charges increase.

  • B. The lattice enthalpy of LiF is greater than that of CsF.

  • C. Converting Na(g) and Cl(g) into Na⁺(g) and Cl⁻(g) is exothermic overall.

  • D. Ionic compounds conduct electricity in the solid state.

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of conditions that favour the formation of an ionic bond.

  • A. Low ionisation enthalpy of the metal

  • B. Large negative electron gain enthalpy of the non-metal

  • C. Small lattice enthalpy of the product

  • D. Large electronegativity difference between the two atoms

(a) A and B only (b) A, B and D only (c) A, C and D only (d) B and C only

37. How many of these statements about the O²⁻ ion are correct?

  • A. The first electron gain enthalpy of oxygen is negative.

  • B. The second electron gain enthalpy of oxygen is positive.

  • C. MgO forms because its large lattice enthalpy outweighs the cost of making O²⁻.

  • D. O²⁻ is smaller than O⁻.

(a) One (b) Two (c) Three (d) Four

38. Choose the correct set of statements about solid NaCl.

  • A. Each Na⁺ is surrounded by six Cl⁻ ions.

  • B. The solid is made of discrete NaCl molecules.

  • C. The formula NaCl only gives the ratio of ions.

  • D. The coordination number of Cl⁻ is 8.

(a) A and C only (b) A, B and C only (c) C and D only (d) A and D only

39. The table lists approximate lattice enthalpies of four alkali metal chlorides.

CompoundLattice enthalpy (kJ mol⁻¹)
LiCl853
NaCl788
KCl717
RbCl692

Which statement explains the trend? (a) It increases down the group because nuclear charge increases (b) It decreases because the anion becomes larger (c) It decreases because the cation radius, and so the interionic distance, increases (d) There is no clear trend

40. For a hypothetical solid MX (all in kJ mol⁻¹): sublimation of M = 108, ionisation enthalpy of M = 502, half bond dissociation of X₂ = 122, electron gain enthalpy of X = −355, ΔfH° of MX = −420. The lattice enthalpy of MX is (a) 43 kJ mol⁻¹ (b) 797 kJ mol⁻¹ (c) 1507 kJ mol⁻¹ (d) 357 kJ mol⁻¹

41. A plot of lattice enthalpy (y-axis) against 1/(r₊ + r₋) (x-axis) for NaF, NaCl, NaBr and NaI gives a rising, nearly straight line. Which compound sits at the top-right end of the line? (a) NaI (b) NaBr (c) NaCl (d) NaF

Case for Q42–Q43: Calcium burns in oxygen to give CaO. Data (kJ mol⁻¹): sublimation of Ca = 178; first ionisation enthalpy of Ca = 590; second ionisation enthalpy of Ca = 1145; half bond dissociation of O₂ = 249; first electron gain enthalpy of O = −141; second electron gain enthalpy of O = +798; lattice enthalpy of CaO = 3401.

42. The total enthalpy needed to convert Ca(s) into Ca²⁺(g) is (a) 1735 kJ mol⁻¹ (b) 768 kJ mol⁻¹ (c) 2091 kJ mol⁻¹ (d) 1913 kJ mol⁻¹

43. Using the data, ΔfH° of CaO is (a) +582 kJ mol⁻¹ (b) −2178 kJ mol⁻¹ (c) −582 kJ mol⁻¹ (d) −2525 kJ mol⁻¹

44. Which order of lattice enthalpy is correct? (a) MgO > NaF > NaCl > KCl (b) NaF > MgO > NaCl > KCl (c) MgO > NaCl > NaF > KCl (d) MgO > NaF > KCl > NaCl

45. Sodium chloride is NaCl and never Na²⁺(Cl⁻)₂ because (a) chlorine cannot accept an electron from sodium (b) the second ionisation enthalpy of Na, which breaks into a noble-gas core, is far too large to be repaid by the extra lattice enthalpy (c) Na²⁺ would be larger than Na⁺ (d) the lattice enthalpy of NaCl₂ would be smaller than that of NaCl

Level 4 answer key

QAnsReason
31dOrder MgO > LiF > NaCl > KCl matches 3800 > 1030 > 788 > 717
32cStandard names of the four Born–Haber steps
33aEach property paired with its cause
34dCaO 2×2 = 4; AlN 3×3 = 9; KBr 1; MgCl₂ 2×1 = 2
35bA, B true; C is +496 − 349 = +147 (endothermic); solids do not conduct
36bLarge lattice enthalpy, not small, favours ionic bonding
37cA, B, C true; adding an electron makes O²⁻ larger
38aNo molecules in the lattice; NaCl is 6 : 6
39cSame anion, cation grows from Li⁺ to Rb⁺
40bU = 108 + 502 + 122 − 355 + 420 = 797
41dNaF has the smallest r₊ + r₋, so the largest 1/(r₊ + r₋) and lattice enthalpy
42d178 + 590 + 1145 = 1913
43c1913 + 249 − 141 + 798 − 3401 = −582
44a2+/2− first; then F⁻ < Cl⁻ and Na⁺ < K⁺
45bSecond IE of Na is about 4560 kJ mol⁻¹
25 min left
‹
›