Chapter 3 of 11 · 24 min read

Chapter 1: Types of Solutions and Concentration Terms

A solution is a uniform mixture, and every question in this unit starts by asking how much solute it holds. This chapter gives you each concentration term, what it divides by, and how to move from one to another.

What you will learn

  • What solute, solvent and a binary solution are, and the nine types of solutions by physical state.

  • Mass percentage, volume percentage, mass by volume percentage and parts per million.

  • Mole fraction, molarity and molality, with their units.

  • Which terms change with temperature and why.

  • Interconversion between molarity, molality, mole fraction and mass percentage using density.

  • Dilution and mixing of solutions.

1.1 What is a solution?

A solution is a homogeneous mixture of two or more substances. Its composition and properties are the same in every part. Stir sugar into chai and every sip is equally sweet: that is a solution.

The component present in the larger amount is usually the solvent. The others are solutes. A solution of only two components is a binary solution. This whole unit works with binary solutions.

The physical state of the solution is usually the state of the solvent. That gives nine types.

Type of solutionSoluteSolventExample
GaseousGasGasAir (O₂ and other gases in N₂)
GaseousLiquidGasChloroform vapour mixed with nitrogen gas
GaseousSolidGasCamphor vapour in nitrogen gas
LiquidGasLiquidO₂ dissolved in water, CO₂ in soda
LiquidLiquidLiquidEthanol in water
LiquidSolidLiquidGlucose or common salt in water
SolidGasSolidH₂ dissolved in palladium
SolidLiquidSolidAmalgam of mercury with sodium
SolidSolidSolidCopper dissolved in gold, brass (Zn in Cu)

A quick check: the amalgam is solid, so mercury (liquid) is the solute and sodium (solid) is the solvent.

1.2 Percentage terms

Mass percentage (w/w) is the mass of a component per 100 g of solution.

Mass % of A=mass of Atotal mass of solution×100\text{Mass \% of A} = \frac{\text{mass of A}}{\text{total mass of solution}} \times 100

A "10% glucose solution by mass" has 10 g glucose in 100 g solution, that is in 90 g water. Commercial acids are sold this way, for example 98% H₂SO₄.

Volume percentage (v/v) is used for liquid-in-liquid solutions.

Volume % of A=volume of Atotal volume of solution×100\text{Volume \% of A} = \frac{\text{volume of A}}{\text{total volume of solution}} \times 100

A 35% (v/v) ethylene glycol coolant has 35 mL glycol in 100 mL of solution. It lowers the freezing point of water in car radiators in Ladakh winters.

Mass by volume percentage (w/v) is the mass of solute in grams per 100 mL of solution. Hospitals use it: a 5% (w/v) glucose drip has 5 g glucose in 100 mL.

Parts per million (ppm) is used for trace amounts, such as fluoride in tap water or dissolved oxygen in a lake.

ppm of A=parts of Atotal parts of solution×106\text{ppm of A} = \frac{\text{parts of A}}{\text{total parts of solution}} \times 10^{6}

The "parts" may be mass, volume or moles, so ppm can be written as mass-to-mass, volume-to-volume or mass-to-volume. 1 ppm by mass means 1 g of A in 10⁶ g of solution.

1.3 Mole fraction

The mole fraction of a component is its moles divided by the total moles of all components.

xA=nAnA+nB,xB=nBnA+nB,xA+xB=1x_A = \frac{n_A}{n_A + n_B}, \qquad x_B = \frac{n_B}{n_A + n_B}, \qquad x_A + x_B = 1

For i components, the sum of all mole fractions is always 1. Mole fraction has no unit. It is the natural term for vapour pressure, so you will use it all through Chapters 3 to 5.

1.4 Molarity

Molarity (M) is the number of moles of solute in 1 litre of solution.

M=nBVsolution (L)=wB×1000MB×V (mL)M = \frac{n_B}{V_{\text{solution}}\,(\text{L})} = \frac{w_B \times 1000}{M_B \times V\,(\text{mL})}

Its unit is mol L⁻¹, also written M. Here w_B is the mass of solute and M_B its molar mass.

The volume of a solution expands when it is heated. The moles of solute stay the same. So molarity falls as temperature rises. A stock solution made in a cool lab in December has a slightly lower molarity in a hot May afternoon.

For dilution, moles of solute stay constant, which gives a handy rule.

M1V1=M2V2(dilution)M_1 V_1 = M_2 V_2 \qquad \text{(dilution)}
Mmix=M1V1+M2V2V1+V2(mixing two solutions of the same solute)M_{\text{mix}} = \frac{M_1 V_1 + M_2 V_2}{V_1 + V_2} \qquad \text{(mixing two solutions of the same solute)}

1.5 Molality

Molality (m) is the number of moles of solute per kilogram of solvent, not solution.

m=nBWA (kg)=wB×1000MB×WA (g)m = \frac{n_B}{W_A\,(\text{kg})} = \frac{w_B \times 1000}{M_B \times W_A\,(\text{g})}

Its unit is mol kg⁻¹. Masses do not change with temperature, so molality is independent of temperature. This is why colligative property formulas use molality.

1.6 Which terms depend on temperature?

Any term that has a volume in it changes with temperature. Terms built only from masses or moles do not.

TermDefined asUnitChanges with temperature?
Mass % (w/w)g solute per 100 g solutionnoneNo
Volume % (v/v)mL solute per 100 mL solutionnoneYes
Mass by volume % (w/v)g solute per 100 mL solutiong per 100 mLYes
ppm (by mass)g solute per 10⁶ g solutionnoneNo
Mole fractionmoles of A per total molesnoneNo
Molaritymoles solute per L solutionmol L⁻¹Yes
Molalitymoles solute per kg solventmol kg⁻¹No
Figure 1.1 · Concentration terms grouped by what they divide by
Figure 1.1 · Concentration terms grouped by what they divide by

Molarity and the two volume-based percentages change slightly with temperature because a solution expands on heating; the other four terms use only masses or moles.

1.7 Interconversion of concentration terms

NEET often gives one term and asks for another. Do not memorise many formulas. Instead, fix a convenient amount of solution and find the masses and moles.

From mass % and density to molarity. Take 100 g of solution. Its volume is 100/d mL. That leads to:

M=10×d×(mass %)MB(d in g mL−1)M = \frac{10 \times d \times (\text{mass \%})}{M_B} \qquad (d \text{ in g mL}^{-1})

From molarity and density to molality. Take 1 L of solution. Its mass is 1000d g. The solute mass is M × M_B g. The solvent mass is the difference.

m=1000 M1000 d−M MBm = \frac{1000\,M}{1000\,d - M \, M_B}

From molality to mole fraction. Take 1 kg of solvent (molar mass M_A in g mol⁻¹). It holds 1000/M_A moles of solvent and m moles of solute.

xB=mm+1000MA=m MA1000+m MAx_B = \frac{m}{m + \dfrac{1000}{M_A}} = \frac{m\,M_A}{1000 + m\,M_A}

From mole fraction to molality. Reverse the same idea.

m=xB×1000xA×MAm = \frac{x_B \times 1000}{x_A \times M_A}

For water, 1000/18 = 55.5 moles per kg. Keep this number ready. In very dilute aqueous solutions (d close to 1, small solute mass), molarity and molality are almost equal.

Worked example 1.1: 15 g of urea is dissolved in 135 g of water. Find the mass percentage of urea.

Solution: Mass of solution = 15 + 135 = 150 g. Mass % = 15/150 × 100 = 10%.

Worked example 1.2: 46 g of ethanol (C₂H₅OH) is mixed with 72 g of water. Find the mole fraction of ethanol.

Solution: n(ethanol) = 46/46 = 1 mol. n(water) = 72/18 = 4 mol. x(ethanol) = 1/(1 + 4) = 0.2. Then x(water) = 0.8.

Worked example 1.3: 4.0 g of NaOH is dissolved in water and the volume is made up to 250 mL. Find the molarity.

Solution: n = 4.0/40 = 0.10 mol. V = 0.250 L. M = 0.10/0.250 = 0.40 M.

Worked example 1.4: 9.0 g of glucose (C₆H₁₂O₆, M = 180) is dissolved in 250 g of water. Find the molality.

Solution: n = 9.0/180 = 0.050 mol. Solvent = 0.250 kg. m = 0.050/0.250 = 0.20 mol kg⁻¹.

Worked example 1.5: A bottle of sulphuric acid reads "98% H₂SO₄ by mass, density 1.84 g mL⁻¹". Find its molarity and molality.

Solution: Molarity = 10 × 1.84 × 98/98 = 18.4 M. For molality, take 100 g of acid. It has 98 g H₂SO₄ (1 mol) in only 2 g water. m = 1/0.002 = 500 mol kg⁻¹. The huge molality shows how little water is present.

Worked example 1.6: A 2.0 M aqueous NaCl solution has density 1.08 g mL⁻¹. Find its molality.

Solution: Take 1 L. Mass of solution = 1080 g. Mass of NaCl = 2.0 × 58.5 = 117 g. Mass of water = 963 g. m = 2.0/0.963 = 2.08 mol kg⁻¹.

Worked example 1.7: The mole fraction of glucose in an aqueous solution is 0.10. Find its molality.

Solution: Take 1 mol in total: 0.10 mol glucose and 0.90 mol water. Mass of water = 0.90 × 18 = 16.2 g. m = 0.10/0.0162 = 6.17 mol kg⁻¹.

Worked example 1.8: 300 mL of 0.40 M HCl is mixed with 200 mL of 0.90 M HCl. Find the molarity of the mixture. What is the mole fraction of solute in a 1.0 molal aqueous solution?

Solution: Moles = 0.300 × 0.40 + 0.200 × 0.90 = 0.12 + 0.18 = 0.30 mol in 0.500 L. M = 0.60 M. For 1.0 molal: 1 mol solute per 1000 g water (55.5 mol). x = 1/(1 + 55.5) = 0.0177.

Quick revision

  • A solution is homogeneous. Solvent is usually the major component, and it fixes the physical state.

  • Mass %, ppm, mole fraction and molality use only masses or moles: they do not change with temperature.

  • Molarity, volume % and w/v % use volume: they fall slightly as temperature rises.

  • Molality divides by kg of solvent. Molarity divides by litres of solution.

  • M = 10 d (mass %)/M_B. m = 1000M/(1000d − M M_B).

  • Mole fraction from molality: x_B = m/(m + 55.5) for water.

  • Dilution: M₁V₁ = M₂V₂. Mixing: total moles over total volume.

NEET traps

  • Dividing by mass of solution instead of mass of solvent while finding molality.

  • Forgetting to convert mL to L or g to kg, which makes the answer 1000 times wrong.

  • Treating molarity and molality as equal for concentrated solutions such as 98% H₂SO₄.

  • Saying mole fraction has the unit mol. It has no unit.

  • In an amalgam, calling mercury the solvent. The solid (sodium) is the solvent.

  • Assuming volumes always add on mixing. Use the stated final volume or the density.

Practice MCQs: Chapter 1

Level 1: Concept check

1. Which concentration term does not change with temperature? (a) Molarity (b) Mass by volume percentage (c) Molality (d) Volume percentage

2. Brass is an example of which type of solution? (a) Gas in solid (b) Liquid in solid (c) Solid in liquid (d) Solid in solid

3. An amalgam of mercury with sodium is a solution of the type (a) liquid in solid (b) solid in liquid (c) liquid in liquid (d) solid in solid

4. 10 g of NaCl is dissolved in 90 g of water. The mass percentage of NaCl is (a) 11.1% (b) 9% (c) 90% (d) 10%

5. How many moles of solute are present in 500 mL of a 0.20 M solution? (a) 0.10 (b) 0.40 (c) 1.0 (d) 0.010

6. The mole fraction of solute in a 1.0 molal aqueous solution is closest to (a) 0.018 (b) 0.18 (c) 0.0010 (d) 0.982

7. A concentration of 1 ppm by mass means (a) 1 g in 1000 g of solution (b) 1 mg in 1 g of solution (c) 1 g in 10⁶ g of solution (d) 1 g in 100 g of solution

8. 4.6 g of ethanol (M = 46) is dissolved in 200 g of water. The molality is (a) 0.05 m (b) 0.25 m (c) 2.0 m (d) 0.50 m

9. The molarity of a solution decreases on heating because (a) the mass of solute decreases (b) the volume of solution increases (c) the moles of solute decrease (d) the mass of solvent increases

10. 25 mL of ethanol is mixed with water to give 100 mL of solution. The volume percentage of ethanol is (a) 20% (b) 25% (c) 33.3% (d) 75%

Level 2: NEET standard

11. Commercial HCl is 36.5% HCl by mass with density 1.20 g mL⁻¹. Its molarity is (a) 10 M (b) 6.0 M (c) 1.2 M (d) 12 M

12. The molality of a 20% (w/w) aqueous NaOH solution is (a) 5.0 m (b) 2.5 m (c) 6.25 m (d) 0.625 m

13. 18 g of glucose (M = 180) is dissolved in 90 g of water. The mole fraction of glucose is (a) 0.10 (b) 0.0196 (c) 0.196 (d) 0.98

14. A 3.0 M aqueous urea (M = 60) solution has density 1.12 g mL⁻¹. Its molality is (a) 2.68 m (b) 3.00 m (c) 3.19 m (d) 3.57 m

15. The mole fraction of a solute in an aqueous solution is 0.20. Its molality is about (a) 11.1 m (b) 13.9 m (c) 2.5 m (d) 0.25 m

16. 400 mL of 0.50 M NaCl is mixed with 600 mL of 0.25 M NaCl. The molarity of the mixture is (a) 0.375 M (b) 0.30 M (c) 0.35 M (d) 0.75 M

17. How much water must be added to 200 mL of 0.60 M KCl to make it 0.15 M? (a) 600 mL (b) 800 mL (c) 400 mL (d) 300 mL

18. 500 mL of 0.20 M CaCl₂ is mixed with 500 mL of 0.20 M NaCl. Assuming full dissociation, the concentration of Cl⁻ ions in the mixture is (a) 0.20 M (b) 0.40 M (c) 0.15 M (d) 0.30 M

19. Which pair contains only temperature-independent terms? (a) Molality and mole fraction (b) Molarity and molality (c) Molarity and volume % (d) Mole fraction and w/v %

20. The molarity of a 5% (w/v) glucose drip (M = 180) is about (a) 0.278 M (b) 0.0278 M (c) 2.78 M (d) 0.50 M

21. The mass of KCl (M = 74.5) needed to make 250 mL of 0.40 M solution is (a) 29.8 g (b) 3.73 g (c) 74.5 g (d) 7.45 g

22. Equal masses of methanol (M = 32) and ethanol (M = 46) are mixed. The mole fraction of methanol is (a) 0.41 (b) 0.50 (c) 0.59 (d) 0.70

Level 3: Challenge

23. A 2.05 M aqueous acetic acid (M = 60) solution has density 1.02 g mL⁻¹. Its molality is (a) 2.05 m (b) 2.29 m (c) 1.97 m (d) 2.50 m

24. An aqueous urea (M = 60) solution is 2.0 molal. The mass percentage of urea is (a) 12.0% (b) 10.7% (c) 11.0% (d) 8.9%

25. The mole fraction of NaOH in a 2.5 molal aqueous solution is (a) 0.025 (b) 0.957 (c) 0.45 (d) 0.043

26. A 1.5 M solution of a solute (M = 100 g mol⁻¹) has a molality of 1.6 mol kg⁻¹. The density of the solution is about (a) 1.04 g mL⁻¹ (b) 1.09 g mL⁻¹ (c) 1.15 g mL⁻¹ (d) 0.94 g mL⁻¹

27. 10 mL of 98% H₂SO₄ (density 1.84 g mL⁻¹) is diluted to 1.0 L. The molarity of the diluted acid is (a) 0.184 M (b) 1.84 M (c) 0.092 M (d) 0.368 M

28. Which statement is incorrect? (a) Molality is moles of solute per kg of solvent (b) The mole fraction of solvent in a dilute solution is close to 1 (c) The molarity of a solution is the same at all temperatures (d) In very dilute aqueous solutions molarity and molality are nearly equal

29. Assertion (A): Molality is preferred over molarity when a solution is studied over a range of temperatures. Reason (R): Molality is defined using masses, which do not change with temperature. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Mass percentage and ppm by mass are both independent of temperature. Statement II: The mole fraction of the solvent can exceed 1 in a concentrated solution. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cMolality uses mass of solvent, which does not change with temperature
2dZinc (solid) dissolved in copper (solid)
3aLiquid mercury is the solute, solid sodium the solvent
4d10/(10 + 90) × 100 = 10%
5a0.20 × 0.500 = 0.10 mol
6a1/(1 + 55.5) = 0.0177
7cParts per 10⁶ parts of solution
8d0.10 mol/0.200 kg = 0.50 m
9bVolume expands, moles stay the same
10b25/100 × 100 = 25%
11d10 × 1.20 × 36.5/36.5 = 12 M
12c0.50 mol NaOH in 0.080 kg water = 6.25 m
13b0.10/(0.10 + 5.0) = 0.0196
14c1120 − 180 = 940 g water; 3.0/0.940 = 3.19 m
15b0.20 × 1000/(0.80 × 18) = 13.9 m
16c(0.20 + 0.15) mol/1.0 L = 0.35 M
17aFinal volume 800 mL, so add 600 mL
18dCl⁻ = 0.20 + 0.10 = 0.30 mol in 1.0 L
19aBoth use only masses or moles
20a50 g L⁻¹/180 = 0.278 M
21d0.10 mol × 74.5 = 7.45 g
22c(1/32)/(1/32 + 1/46) = 0.59
23b1020 − 123 = 897 g water; 2.05/0.897 = 2.29 m
24b120 g urea in 1120 g solution = 10.7%
25d2.5/(2.5 + 55.5) = 0.043
26b1000d − 150 = 1500/1.6 = 937.5, d = 1.09
27a18.4 M × 10 mL/1000 mL = 0.184 M
28cMolarity falls as volume expands on heating
29aMass-based term stays fixed, which is exactly why it is preferred
30cI true; a mole fraction can never exceed 1

Chapter 1 revision sheet

One-page summary

  • A solution is a homogeneous mixture; the component present in the largest amount is usually the solvent.

  • A binary solution has two components; the physical states of solute and solvent give nine types (gas in liquid, solid in solid and so on).

  • Mass percent (w/w) = mass of solute × 100 / mass of solution.

  • Volume percent (v/v) = volume of solute × 100 / volume of solution; used for liquid–liquid mixtures.

  • Mass by volume percent (w/v) = grams of solute per 100 mL of solution; common in medicine labels.

  • ppm = mass of solute × 10⁶ / mass of solution; used for trace amounts (pollutants, fluoride in water).

  • Mole fraction x_A = n_A / (total moles); it has no unit and all mole fractions add up to 1.

  • Molarity M = moles of solute / volume of solution in litres (mol L⁻¹).

  • Molality m = moles of solute / mass of solvent in kg (mol kg⁻¹).

  • Terms based on volume (molarity, v/v, w/v) change with temperature; terms based on mass or moles (molality, w/w, mole fraction, ppm) do not.

  • Dilution: M₁V₁ = M₂V₂; mixing: M_mix = (M₁V₁ + M₂V₂)/(V₁ + V₂).

  • From mass percent and density: M = 10 × d × (w%)/M₂.

  • From molarity to molality: m = 1000M / (1000d − M × M₂).

  • For water as solvent: x₂ = m/(m + 55.5); pure water is about 55.5 M.

Must-remember table

TermFormulaUnitChanges with temperature?
Mass percentw₂ × 100 / w(solution)%No
Volume percentV₂ × 100 / V(solution)%Yes
Mass by volume percentg solute per 100 mL solution% (w/v)Yes
ppmw₂ × 10⁶ / w(solution)ppmNo
Mole fractionn₂ / (n₁ + n₂)noneNo
Molarityn₂ / V(L)mol L⁻¹Yes
Molalityn₂ / w₁(kg)mol kg⁻¹No

Memory aids

  • "molaLity = kiLogram, molaRity = Room in litres": the extra L in molality reminds you of kilograms of soLvent; molarity takes up Room (volume), so it Rises and falls with temperature.

  • "Ten Dogs Walk to Market": M = 10 × d × w% / M₂ (Ten, Density, Weight percent, Molar mass).

  • "Fractions make one roti": all mole fractions in a solution add up to exactly one whole.

  • "55.5 is water's address": pure water is 55.5 M, and x₂ = m/(m + 55.5) for aqueous solutions.

  • "Volume is a fair-weather friend": any term with volume in it changes when the temperature changes.

Concept connections

  • Chemistry Book 1: Some Basic Concepts in Chemistry: mole concept and molar mass are the base of every concentration term here.

  • Chemistry Book 6: Equilibrium: equilibrium constants and pH use molar concentrations.

  • Chemistry Book 20: Principles Related to Practical Chemistry: standard solutions and titrations rely on molarity and dilution.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I with List II.

List I (concentration term):

  • A. Molarity

  • B. Molality

  • C. Mole fraction

  • D. Parts per million

List II (description):

  • i. mol kg⁻¹ of solvent

  • ii. mol L⁻¹ of solution

  • iii. No unit; all such values in a solution add up to 1

  • iv. Mass of solute per 10⁶ parts by mass of solution

(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-i, C-iii, D-ii

32. Match List I with List II.

List I (solution):

  • A. 4.9 g H₂SO₄ in 250 mL solution: molarity

  • B. 11.7 g NaCl in 500 g water: molality

  • C. 4.6 g ethanol + 3.6 g water: mole fraction of ethanol

  • D. 2 mg of a solute in 500 g solution: ppm

List II (value):

  • i. 0.40

  • ii. 4

  • iii. 0.20

  • iv. 0.33

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iii, B-i, C-iv, D-ii (d) A-iv, B-iii, C-i, D-ii

33. Match List I with List II.

List I (definition):

  • A. Grams of solute in 100 g of solution

  • B. Millilitres of solute in 100 mL of solution

  • C. Grams of solute in 100 mL of solution

  • D. Moles of solute in 1 kg of solvent

List II (term):

  • i. Molality

  • ii. Mass percent

  • iii. Volume percent

  • iv. Mass by volume percent

(a) A-ii, B-iv, C-iii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-ii, B-iii, C-iv, D-i

34. Match List I with List II (d = density in g mL⁻¹, M₂ = molar mass of solute, w = mass percent).

List I (conversion):

  • A. Molarity from mass percent and density

  • B. Molality from molarity and density

  • C. Mole fraction of solute from molality (water)

  • D. New molarity after dilution

List II (relation):

  • i. x₂ = m/(m + 55.5)

  • ii. M₁V₁ = M₂V₂

  • iii. M = 10dw/M₂

  • iv. m = 1000M/(1000d − M × M₂)

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-ii, B-iv, C-i, D-iii

35. How many of the following statements are correct?

  • A. Molality of a solution does not change when it is heated.

  • B. The molarity of pure water is about 55.5 M.

  • C. The mole fractions of all components of a solution add up to 1.

  • D. ppm is the preferred unit for concentrated acids.

(a) 1 (b) 2 (c) 3 (d) 4

36. Choose the correct set of statements.

  • A. The mole fraction of solute in a 1 m aqueous solution is about 0.018.

  • B. 0.5 M NaOH contains 20 g NaOH per litre of solution.

  • C. 100 mL of 2 M HCl diluted to 500 mL gives 0.5 M HCl.

  • D. Molality uses the mass of the solution in its denominator.

(a) A and B only (b) A, B and C only (c) B and D only (d) A and C only

37. 0.1 mol of a non-volatile solute is dissolved in 1 kg of water at 25 °C. The solution is then warmed to 60 °C without loss of water. How many of the following are correct?

  • A. The molality stays 0.1 mol kg⁻¹.

  • B. The molarity decreases slightly.

  • C. The mole fraction of the solute stays the same.

  • D. The mass percent of the solute increases.

(a) 2 (b) 3 (c) 4 (d) 1

38. Choose the correct set of statements.

  • A. Mixing 1 L of 1 M NaCl with 1 L of 3 M NaCl gives 2 M NaCl (volumes additive).

  • B. Equal masses of ethanol and water give a mixture with mole fraction of ethanol 0.5.

  • C. A 10% (w/w) glucose solution has 10 g glucose in 90 g water.

  • D. Molarity is moles of solute per 1000 g of solution.

(a) A and B only (b) B and D only (c) C and D only (d) A and C only

39. The table gives four aqueous solutions of the same non-volatile solute.

SolutionMoles of soluteMass of water
P0.2500 g
Q0.31000 g
R0.1200 g
S0.52000 g

Which solution has the largest mole fraction of solute?

(a) P (b) Q (c) R (d) S

40. Different masses of a solute are dissolved to make 250 mL of solution each. A graph of molarity (y-axis) against mass of solute in grams (x-axis) is a straight line through the origin with slope 0.1 mol L⁻¹ g⁻¹. The molar mass of the solute is

(a) 10 g mol⁻¹ (b) 40 g mol⁻¹ (c) 25 g mol⁻¹ (d) 100 g mol⁻¹

41. A bottle label reads: nitric acid, 63% (w/w), density 1.4 g mL⁻¹. The molarity of the acid is

(a) 14 M (b) 10 M (c) 22.2 M (d) 7 M

Read the passage and answer Q42 and Q43. A hospital lab dissolves 9.0 g of NaCl (M = 58.5 g mol⁻¹) in water and makes the volume up to exactly 1.00 L. The density of the solution is 1.005 g mL⁻¹. This is used as a saline drip.

42. The molarity of the saline is about

(a) 0.090 M (b) 0.308 M (c) 1.54 M (d) 0.154 M

43. The mass percent (w/w) of NaCl in the saline is about

(a) 0.85% (b) 0.90% (c) 9.0% (d) 0.95%

44. The mole fraction of urea in an aqueous solution is 0.05. The molality of the solution is about

(a) 2.78 mol kg⁻¹ (b) 3.08 mol kg⁻¹ (c) 2.92 mol kg⁻¹ (d) 0.05 mol kg⁻¹

45. 200 mL of 0.5 M H₂SO₄ is mixed with 300 mL of 0.2 M H₂SO₄, and the mixture is diluted with water to 1.0 L. The final molarity of H₂SO₄ is

(a) 0.16 M (b) 0.32 M (c) 0.35 M (d) 0.08 M

Level 4 answer key

QAnsReason
31bMolarity is per litre of solution, molality per kg of solvent
32c0.05/0.25 = 0.20 M; 0.2/0.5 = 0.40 m; 0.1/0.3 = 0.33; 2 × 10⁻³ × 10⁶/500 = 4 ppm
33dStraight from the definitions of w/w, v/v, w/v and molality
34aStandard conversion relations; dilution keeps moles constant
35cA, B, C true; ppm is for trace amounts, not concentrated acids
36a1/(1 + 55.5) = 0.018; 0.5 × 40 = 20 g; C gives 0.4 M; D uses solvent mass
37bA, B, C true; mass percent does not change on heating
38d(1 + 3)/2 = 2 M; equal masses give x(ethanol) = 0.28, not 0.5
39cHighest molality (0.5 m) gives the highest mole fraction
40bSlope = 1/(0.25 × M₂) = 0.1, so M₂ = 40
41aM = 10 × 1.4 × 63/63 = 14 M
42d9.0/58.5 = 0.154 mol in 1 L
43bMass of solution = 1005 g; 9.0 × 100/1005 = 0.90%
44c0.05 mol urea per 0.95 × 18 = 17.1 g water; 0.05/0.0171 = 2.92 m
45aMoles = 0.10 + 0.06 = 0.16 mol in 1.0 L
24 min left
‹
›