Chapter 7: Abnormal Molar Masses and the van't Hoff Factor
When a solute splits into ions or joins into clusters, the number of particles changes, so colligative properties change too. The van't Hoff factor i corrects every colligative formula and tells us how far a solute has dissociated or associated.
What you will learn
Why dissociation and association give abnormal molar masses.
The three equivalent definitions of the van't Hoff factor i.
Modified forms of all four colligative property equations.
Relations between i and the degree of dissociation or association.
Using i to compare colligative properties of different solutions and to find structures of complexes.
7.1 Abnormal molar masses
The formulas of Chapters 5 and 6 assume every dissolved formula unit stays as one particle. Two kinds of solutes break this rule.
Dissociation. An electrolyte such as KCl splits into ions in water.
One mole of KCl gives up to two moles of particles. The colligative effect nearly doubles. If you plug the measured ΔTf into M₂ = 1000 Kf w₂/(ΔTf w₁), you get a molar mass about half of 74.5 g mol⁻¹. The calculated molar mass is too low.
Association. Ethanoic acid (CH₃COOH) and benzoic acid (C₆H₅COOH) form dimers in benzene through two hydrogen bonds between their –COOH groups.
The number of particles falls, so the colligative effect falls. The calculated molar mass comes out close to twice the formula mass, about 120 g mol⁻¹ for ethanoic acid instead of 60.
A molar mass that is higher or lower than the expected value is called an abnormal molar mass.
7.2 The van't Hoff factor
Van't Hoff introduced a factor i to account for these changes. It can be written three ways, and all three are equal.
i > 1: dissociation; observed molar mass is less than normal.
i < 1: association; observed molar mass is more than normal.
i = 1: neither (glucose, urea, sucrose in water).
Significance of i. It tells us whether a solute dissociates or associates in a solvent, and to what extent. It corrects all colligative formulas so that they work for electrolytes. It also lets us work out formulas of complexes, as in Worked example 7.9.
7.3 Modified colligative equations
Multiply each formula by i.
The first form uses the dilute approximation. To compare two solutions in the same solvent, compare i × m (or i × C for osmotic pressure). The larger the product, the larger the effect.
7.4 Degree of dissociation
Let one formula unit of the electrolyte give n ions, and let α be the fraction that dissociates. Start with 1 mol.
| Species | Moles at start | Moles at equilibrium |
|---|---|---|
| Undissociated electrolyte | 1 | 1 − α |
| Ions (n per unit) | 0 | nα |
| Total particles | 1 | 1 − α + nα |
For complete dissociation (α = 1), i = n.
| Solute in water | Ions formed | n | i (complete dissociation) |
|---|---|---|---|
| Glucose, urea, sucrose | none | 1 | 1 |
| NaCl, KCl, MgSO₄ | 2 | 2 | 2 |
| CaCl₂, K₂SO₄, Na₂SO₄ | 3 | 3 | 3 |
| AlCl₃, K₃[Fe(CN)₆], Na₃PO₄ | 4 | 4 | 4 |
| K₄[Fe(CN)₆] | 5 | 5 | 5 |
In real solutions of strong electrolytes, i is a little less than n. Oppositely charged ions attract each other and some move about as ion pairs. For NaCl, i is about 1.9 at 0.1 m and approaches 2 as the solution is diluted.
7.5 Degree of association
Let n molecules of A join to form one particle Aₙ, and let α be the fraction of A that associates. Start with 1 mol of A.
At equilibrium: unassociated A = 1 − α; associated particles = α/n.
For dimerisation (n = 2): i = 1 − α/2 and α = 2(1 − i). For complete dimerisation i = 0.5. For complete trimerisation i = 1/3.
| Behaviour | Value of i | Observed molar mass | Example |
|---|---|---|---|
| Dissociation | Greater than 1 | Lower than normal | NaCl, K₂SO₄ in water |
| Association | Less than 1 | Higher than normal | Ethanoic acid, benzoic acid in benzene |
| Neither | 1 | Normal | Glucose, urea in water |
Worked example 7.1: Find the freezing point depression of 0.10 m aqueous K₂SO₄, assuming complete dissociation.
Solution: K₂SO₄ → 2K⁺ + SO₄²⁻, so i = 3. ΔTf = 3 × 1.86 × 0.10 = 0.558 K.
Worked example 7.2: Arrange 0.10 m aqueous solutions of glucose, NaCl, CaCl₂ and AlCl₃ in increasing order of freezing point (complete dissociation).
Solution: i × m = 0.10, 0.20, 0.30, 0.40. Larger i × m means lower freezing point. Increasing freezing point: AlCl₃ < CaCl₂ < NaCl < glucose.
Worked example 7.3: A 0.10 m aqueous solution of a weak acid HA freezes at −0.2046 °C. Find its degree of dissociation.
Solution: Calculated ΔTf = 1.86 × 0.10 = 0.186 K. i = 0.2046/0.186 = 1.10. HA ⇌ H⁺ + A⁻, n = 2. α = (1.10 − 1)/(2 − 1) = 0.10, or 10%.
Worked example 7.4: 0.585 g of NaCl in 100 g of water freezes at −0.348 °C. Find the observed molar mass, i and α.
Solution: M(observed) = 1000 × 1.86 × 0.585/(0.348 × 100) = 31.3 g mol⁻¹. i = 58.5/31.3 = 1.87. α = (1.87 − 1)/1 = 0.87.
Worked example 7.5: 2.44 g of benzoic acid (M = 122) in 50 g of benzene lowers its freezing point by 1.23 K. Kf(benzene) = 5.12 K kg mol⁻¹. Find the degree of association.
Solution: m = (2.44/122)/0.050 = 0.40 mol kg⁻¹. Calculated ΔTf = 5.12 × 0.40 = 2.048 K. i = 1.23/2.048 = 0.60. For dimerisation, α = 2(1 − 0.60) = 0.80, or 80%.
Worked example 7.6: Find the osmotic pressure of 0.10 M CaCl₂ at 300 K if it is 90% dissociated.
Solution: n = 3, so i = 1 + 2 × 0.90 = 2.8. π = 2.8 × 0.10 × 0.0821 × 300 = 6.90 atm.
Worked example 7.7: What concentration of NaCl (complete dissociation) is isotonic with 0.10 M glucose?
Solution: Isotonic means equal i × C. 1 × 0.10 = 2 × C, so C = 0.050 M.
Worked example 7.8: Find i for K₄[Fe(CN)₆] if it is 50% dissociated.
Solution: K₄[Fe(CN)₆] → 4K⁺ + [Fe(CN)₆]⁴⁻, n = 5. i = 1 + 4 × 0.50 = 3.0.
Worked example 7.9: A complex with empirical formula CoCl₃·5NH₃ is fully dissociated in water. A 0.010 m solution freezes at −0.0558 °C. Find its structure.
Solution: i = 0.0558/(1.86 × 0.010) = 3. One formula unit gives 3 ions: one complex cation and two Cl⁻. The formula is [Co(NH₃)₅Cl]Cl₂, which gives [Co(NH₃)₅Cl]²⁺ + 2Cl⁻.
Quick revision
Dissociation lowers the observed molar mass; association raises it.
i = normal M/observed M = observed effect/calculated effect = particles after/particles before.
All colligative formulas get a factor i: ΔTf = iKf m, ΔTb = iKb m, π = iCRT, RLVP = i n₂/n₁.
Dissociation into n ions: i = 1 + (n − 1)α.
Association into Aₙ: i = 1 − α(1 − 1/n); dimer: i = 1 − α/2.
Compare solutions by i × m. Isotonic solutions have equal i × C.
Ethanoic and benzoic acids dimerise in benzene (i near 0.5).
NEET traps
Using i = n for a weak electrolyte. Use i = 1 + (n − 1)α.
Counting K₄[Fe(CN)₆] as giving 11 ions. The complex ion stays whole: n = 5.
Getting i for association upside down. Association always gives i < 1.
Comparing molalities alone, without multiplying by i.
Forgetting that observed molar mass and observed colligative property move in opposite directions.
Assuming ethanoic acid dimerises in water. It dimerises in benzene; in water it ionises slightly.
Practice MCQs: Chapter 7
Level 1: Concept check
1. The van't Hoff factor for K₂SO₄ on complete dissociation is (a) 2 (b) 3 (c) 4 (d) 1
2. For a solute that associates in solution, i is (a) greater than 1 (b) equal to 1 (c) less than 1 (d) zero
3. In benzene, ethanoic acid undergoes (a) dimerisation (b) complete ionisation (c) hydrolysis (d) dissociation into three ions
4. The molar mass of NaCl found from freezing point depression in water is (a) higher than 58.5 g mol⁻¹ (b) lower than 58.5 g mol⁻¹ (c) exactly 58.5 g mol⁻¹ (d) zero
5. The van't Hoff factor i equals (a) normal molar mass/observed molar mass (b) observed molar mass/normal molar mass (c) normal molar mass × observed molar mass (d) 1/normal molar mass
6. The freezing point depression of an electrolyte solution is given by (a) ΔTf = Kf m/i (b) ΔTf = Kf m + i (c) ΔTf = i² Kf m (d) ΔTf = i Kf m
7. The van't Hoff factor of glucose in water is (a) 2 (b) 0.5 (c) 1 (d) 0
8. Which 0.10 m aqueous solution has the lowest freezing point? (complete dissociation) (a) Glucose (b) NaCl (c) CaCl₂ (d) AlCl₃
9. The van't Hoff factor of AlCl₃ on complete dissociation is (a) 4 (b) 3 (c) 2 (d) 1
10. An abnormal molar mass is obtained when the solute (a) is non-volatile (b) is a non-electrolyte (c) is in dilute solution (d) dissociates or associates
Level 2: NEET standard
11. A 0.10 m aqueous solution of a weak monobasic acid freezes at −0.2046 °C (Kf = 1.86 K kg mol⁻¹). Its degree of dissociation is (a) 0.05 (b) 0.10 (c) 0.20 (d) 1.1
12. Benzoic acid is 80% dimerised in benzene. Its van't Hoff factor is (a) 0.4 (b) 0.8 (c) 0.6 (d) 1.4
13. K₄[Fe(CN)₆] is 50% dissociated in a solution. Its van't Hoff factor is (a) 5 (b) 2.5 (c) 2 (d) 3
14. The osmotic pressure of 0.10 M CaCl₂ at 300 K, if 90% dissociated, is about (R = 0.0821 L atm K⁻¹ mol⁻¹) (a) 2.46 atm (b) 6.90 atm (c) 7.39 atm (d) 4.93 atm
15. Assuming complete dissociation, the NaCl solution isotonic with 0.10 M glucose has a molarity of (a) 0.050 M (b) 0.10 M (c) 0.20 M (d) 0.025 M
16. The freezing point depression of 0.050 m aqueous K₂SO₄ (complete dissociation, Kf = 1.86 K kg mol⁻¹) is (a) 0.093 K (b) 0.186 K (c) 0.279 K (d) 0.372 K
17. A solute of molar mass 60 g mol⁻¹ is completely dimerised in a solvent. Its observed molar mass is (a) 30 g mol⁻¹ (b) 60 g mol⁻¹ (c) 240 g mol⁻¹ (d) 120 g mol⁻¹
18. The correct order of boiling points of 0.10 m aqueous solutions (complete dissociation) is (a) urea > KCl > CaCl₂ > Na₃PO₄ (b) Na₃PO₄ > CaCl₂ > KCl > urea (c) KCl > Na₃PO₄ > CaCl₂ > urea (d) CaCl₂ > Na₃PO₄ > urea > KCl
19. For a salt AB₂ that dissociates as AB₂ → A²⁺ + 2B⁻ with degree of dissociation α, i equals (a) 1 + α (b) 1 + 3α (c) 1 − α/2 (d) 1 + 2α
20. The van't Hoff factor of 0.1 m NaCl is slightly less than 2 because (a) interionic attractions reduce the effective number of free particles (b) NaCl dimerises in water (c) NaCl is a weak electrolyte (d) water molecules associate
21. 0.585 g of NaCl in 100 g of water freezes at −0.348 °C (Kf = 1.86 K kg mol⁻¹). The degree of dissociation of NaCl is about (a) 0.87 (b) 0.94 (c) 0.53 (d) 1.87
22. A solute trimerises completely in a solvent. Its van't Hoff factor is (a) 3 (b) 1/3 (c) 2/3 (d) 1
Level 3: Challenge
23. 2.44 g of benzoic acid (M = 122) in 50 g of benzene lowers the freezing point by 1.23 K (Kf = 5.12 K kg mol⁻¹). The degree of association of benzoic acid is about (a) 0.40 (b) 0.60 (c) 0.80 (d) 0.20
24. A complex CoCl₃·5NH₃ is fully ionised in water. A 0.010 m solution freezes at −0.0558 °C (Kf = 1.86 K kg mol⁻¹). Its formula is (a) [Co(NH₃)₅Cl]Cl₂ (b) [Co(NH₃)₅]Cl₃ (c) [Co(NH₃)₅Cl₂]Cl (d) [Co(NH₃)₃Cl₃]·2NH₃
25. Which aqueous solution has the highest boiling point? (complete dissociation of salts) (a) 0.18 m urea (b) 0.06 m CaCl₂ (c) 0.10 m NaCl (d) 0.04 m AlCl₃
26. A weak electrolyte AB is 20% dissociated in a 0.50 m aqueous solution. The elevation of boiling point is (Kb = 0.52 K kg mol⁻¹) (a) 0.26 K (b) 0.312 K (c) 0.52 K (d) 0.208 K
27. A 0.010 M solution of a salt XY has an osmotic pressure of 0.443 atm at 300 K (R = 0.0821 L atm K⁻¹ mol⁻¹). The degree of dissociation of XY is about (a) 0.2 (b) 0.4 (c) 0.9 (d) 0.8
28. Which statement is wrong? (a) i > 1 when the solute dissociates (b) The observed molar mass of a dissociating solute is less than normal (c) For an associating solute, the observed colligative property is larger than the calculated one (d) i = observed colligative property/calculated colligative property
29. Assertion (A): A 0.1 m NaCl solution freezes at a lower temperature than a 0.1 m glucose solution. Reason (R): NaCl dissociates in water, giving nearly twice as many solute particles. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: The molar mass of ethanoic acid found from colligative measurements in benzene is about twice its formula mass. Statement II: For a solute that dissociates, the van't Hoff factor is less than 1. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | 2K⁺ + SO₄²⁻ = 3 ions |
| 2 | c | Fewer particles than formula units |
| 3 | a | Hydrogen-bonded dimers form in benzene |
| 4 | b | More particles, larger ΔTf, smaller calculated M |
| 5 | a | Definition of i |
| 6 | d | Each colligative formula is multiplied by i |
| 7 | c | Glucose neither dissociates nor associates |
| 8 | d | Largest i × m (4 × 0.10) |
| 9 | a | Al³⁺ + 3Cl⁻ |
| 10 | d | Particle number changes |
| 11 | b | i = 0.2046/0.186 = 1.10; α = 0.10 |
| 12 | c | i = 1 − 0.80/2 = 0.60 |
| 13 | d | i = 1 + 4 × 0.50 = 3 |
| 14 | b | i = 2.8; 2.8 × 0.10 × 0.0821 × 300 = 6.90 atm |
| 15 | a | 2 × 0.050 = 0.10 |
| 16 | c | 3 × 1.86 × 0.050 = 0.279 K |
| 17 | d | Half the particles, so M doubles |
| 18 | b | i × m: 0.40 > 0.30 > 0.20 > 0.10 |
| 19 | d | n = 3, so i = 1 + 2α |
| 20 | a | Ion pairing at finite concentration |
| 21 | a | M(obs) = 31.3; i = 1.87; α = 0.87 |
| 22 | b | Three molecules make one particle |
| 23 | c | i = 1.23/2.048 = 0.60; α = 2(1 − 0.60) = 0.80 |
| 24 | a | i = 3: one cation and two Cl⁻ |
| 25 | c | i × m: 0.18, 0.18, 0.20, 0.16 |
| 26 | b | i = 1.2; 1.2 × 0.52 × 0.50 = 0.312 K |
| 27 | d | i = 0.443/0.2463 = 1.8; α = 0.8 |
| 28 | c | Association lowers the observed colligative property |
| 29 | a | More particles give larger ΔTf |
| 30 | c | Dissociation gives i > 1 |
Chapter 7 revision sheet
One-page summary
Electrolytes dissociate in water and give more particles than formula units; some solutes associate (dimerise) in non-polar solvents and give fewer.
The molar mass found from a colligative property is then wrong: an abnormal molar mass.
van't Hoff factor i = observed colligative property / calculated (normal) value.
Also i = normal molar mass / observed molar mass = total moles of particles after / moles of solute taken.
i > 1 for dissociation (NaCl, K₂SO₄), i < 1 for association (ethanoic acid or benzoic acid in benzene), i = 1 for non-electrolytes (urea, glucose, sucrose).
Modified formulas: ΔTb = i Kb m, ΔTf = i Kf m, π = i CRT, relative lowering = i x₂ (dilute).
Dissociation into n ions with degree α: i = 1 + (n − 1)α, so α = (i − 1)/(n − 1).
Association of n molecules into one with degree α: i = 1 − α + α/n, so α = (1 − i)/(1 − 1/n).
For dimerisation (n = 2): i = 1 − α/2; complete dimerisation gives i = 0.5.
In real solutions, ion attraction makes i slightly less than the ideal whole number; it approaches the ideal value on dilution.
To rank colligative effects of different solutions, compare i × m (or i × C).
The value of i helps decide the formula of a complex, e.g. how many chloride ions lie outside the coordination sphere.
Must-remember table
| Solute (complete change) | Particles per formula unit | i |
|---|---|---|
| Glucose, urea, sucrose | 1 | 1 |
| NaCl, KCl, MgSO₄ | 2 | 2 |
| CaCl₂, K₂SO₄, Na₂SO₄ | 3 | 3 |
| AlCl₃, K₃[Fe(CN)₆] | 4 | 4 |
| Al₂(SO₄)₃, K₄[Fe(CN)₆] | 5 | 5 |
| Ethanoic acid or benzoic acid dimer in benzene | 1/2 | 0.5 |
Memory aids
"i above 1 = Ions split; i below 1 = molecules Join": dissociation raises i, association lowers it.
"n counts the pieces": in α = (i − 1)/(n − 1), n is the number of ions from one formula unit.
"Pairs halve": a complete dimer gives i = 0.5, so the observed molar mass doubles.
"Multiply before you compare": rank solutions by i × m, never by m alone.
"Bigger i, smaller M": observed molar mass = normal molar mass / i.
Concept connections
Chemistry Book 6: Equilibrium: degree of ionisation of weak electrolytes links to α found from i.
Chemistry Book 12: Coordination Compounds: i (or conductivity) tells how many ions a complex gives, fixing its formula.
Chemistry Book 7: Redox Reactions and Electrochemistry: strong and weak electrolytes and their conductance.
Practice MCQs: Chapter 7, Level 4 (new NEET pattern)
31. Assume complete dissociation or association. Match List I with List II.
List I (solute):
A. NaCl in water
B. K₂SO₄ in water
C. K₄[Fe(CN)₆] in water
D. Benzoic acid in benzene (complete dimerisation)
List II (i):
i. 0.5
ii. 5
iii. 2
iv. 3
(a) A-iii, B-ii, C-iv, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
32. Match List I with List II.
List I:
A. i greater than 1
B. i less than 1
C. i equal to 1
D. The van't Hoff factor i
List II:
i. Association of solute
ii. Dissociation of solute
iii. Urea in water
iv. Observed colligative property ÷ calculated colligative property
(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-i, C-iii, D-ii
33. Match List I with List II (α = degree of change, n = number of particles involved).
List I:
A. α for dissociation
B. α for association
C. i for AB₂ → A²⁺ + 2B⁻ with degree α
D. i for 2A ⇌ A₂ with degree α
List II:
i. 1 − α/2
ii. (i − 1)/(n − 1)
iii. (1 − i)/(1 − 1/n)
iv. 1 + 2α
(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-iii, C-ii, D-i
34. For 0.1 m aqueous solutions (Kf = 1.86 K kg mol⁻¹, complete dissociation), match List I with List II.
List I:
A. Glucose
B. NaCl
C. CaCl₂
D. Al₂(SO₄)₃
List II (ΔTf):
i. 0.558 K
ii. 0.93 K
iii. 0.186 K
iv. 0.372 K
(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i
35. How many of the following statements are correct?
A. The molar mass of NaCl found from ΔTf is less than 58.5 g mol⁻¹.
B. Ethanoic acid in benzene shows a molar mass close to 30 g mol⁻¹.
C. For a non-electrolyte, i = 1.
D. The van't Hoff factor of an electrolyte does not depend on concentration.
(a) 3 (b) 1 (c) 4 (d) 2
36. Choose the correct set of statements.
A. 0.1 M K₂SO₄ has a higher osmotic pressure than 0.1 M NaCl at the same temperature.
B. 0.1 m glucose and 0.05 m NaCl have about the same ΔTf.
C. The measured i of NaCl in a 0.1 m solution is slightly less than 2.
D. Association of solute particles raises colligative properties.
(a) A and B only (b) A, B and C only (c) B, C and D only (d) A and D only
37. Consider 0.01 m aqueous solutions of urea, NaCl, MgCl₂ and K₃[Fe(CN)₆] (complete dissociation). How many statements are correct?
A. Urea has the highest freezing point.
B. K₃[Fe(CN)₆] has the lowest freezing point.
C. NaCl and urea have the same ΔTf.
D. ΔTf of MgCl₂ is three times that of urea.
(a) 3 (b) 2 (c) 4 (d) 1
38. Choose the correct set of statements.
A. For Na₂SO₄ that is 80% dissociated, i = 2.6.
B. For a solute 50% dimerised, i = 0.75.
C. The largest possible i for CaCl₂ is 3.
D. For complete trimerisation (3A → A₃), i = 1/3.
(a) A and B only (b) A, B and C only (c) A, B, C and D (d) B and D only
39. The table shows ΔTf of three 0.01 m aqueous solutions (Kf = 1.86 K kg mol⁻¹). Each solute is glucose, KCl or CaCl₂, fully dissociated where possible.
| Solution | ΔTf (K) |
|---|---|
| X | 0.0558 |
| Y | 0.0372 |
| Z | 0.0186 |
The correct identification is
(a) X glucose, Y KCl, Z CaCl₂ (b) X KCl, Y CaCl₂, Z glucose (c) X CaCl₂, Y glucose, Z KCl (d) X CaCl₂, Y KCl, Z glucose
40. A graph of measured i for aqueous NaCl against molality shows i close to 2 at very low molality and falling slowly as molality rises. The best explanation is
(a) NaCl molecules dimerise at high concentration (b) attraction between oppositely charged ions (ion pairing) lowers the effective number of particles (c) NaCl reacts with water at high concentration (d) Kf of water changes with concentration
41. A 0.05 m aqueous solution of a weak monobasic acid HA freezes at −0.1116 °C. Kf = 1.86 K kg mol⁻¹. The degree of dissociation of HA is
(a) 0.20 (b) 0.12 (c) 1.2 (d) 0.10
Read the passage and answer Q42 and Q43. A hospital pharmacist must prepare an IV fluid isotonic with blood. Blood has an osmotic pressure of 7.8 atm at body temperature (310 K). Take R = 0.0821 L atm K⁻¹ mol⁻¹ and NaCl as fully dissociated (M = 58.5 g mol⁻¹).
42. The total concentration of dissolved particles in blood is about
(a) 0.15 mol L⁻¹ (b) 0.62 mol L⁻¹ (c) 0.31 mol L⁻¹ (d) 3.1 mol L⁻¹
43. The mass of NaCl needed per litre of the IV fluid is about
(a) 4.5 g (b) 9.0 g (c) 18 g (d) 0.9 g
44. A 0.01 m aqueous solution of the complex CrCl₃·6H₂O freezes at −0.0558 °C (Kf = 1.86 K kg mol⁻¹). Assuming complete ionisation, the complex is
(a) [Cr(H₂O)₆]Cl₃ (b) [Cr(H₂O)₄Cl₂]Cl·2H₂O (c) [Cr(H₂O)₃Cl₃]·3H₂O (d) [Cr(H₂O)₅Cl]Cl₂·H₂O
45. 1.22 g of benzoic acid (M = 122 g mol⁻¹) in 20 g of benzene lowers the freezing point by 1.536 K. Kf of benzene is 5.12 K kg mol⁻¹. The percentage of benzoic acid that has dimerised is
(a) 80% (b) 60% (c) 40% (d) 20%
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | NaCl 2 ions, K₂SO₄ 3, K₄[Fe(CN)₆] 5; a complete dimer gives 0.5 |
| 32 | b | Splitting raises i, joining lowers it; urea is a non-electrolyte |
| 33 | a | Standard relations; AB₂ gives 1 − α + 3α = 1 + 2α |
| 34 | c | ΔTf = i × 0.186: 0.186, 0.372, 0.558, 0.93 K |
| 35 | d | A and C true; ethanoic acid dimerises (about 120); i changes with concentration |
| 36 | b | i × m: 0.1 vs 0.1 for B; association lowers colligative effects |
| 37 | a | A, B, D true; NaCl has twice the ΔTf of urea |
| 38 | c | 1 + 2 × 0.8 = 2.6; 1 − 0.25 = 0.75; CaCl₂ gives 3 ions; 1 − 1 + 1/3 = 1/3 |
| 39 | d | i = ΔTf/0.0186: 3, 2, 1 |
| 40 | b | Ion pairing at higher concentration makes i fall below 2 |
| 41 | a | i = 0.1116/(1.86 × 0.05) = 1.2; α = (1.2 − 1)/(2 − 1) = 0.20 |
| 42 | c | C = π/RT = 7.8/(0.0821 × 310) = 0.31 mol L⁻¹ |
| 43 | b | NaCl gives 2 particles: 0.153 M × 58.5 = 9.0 g L⁻¹ |
| 44 | d | i = 0.0558/0.0186 = 3: one complex ion + two Cl⁻ |
| 45 | a | Calculated ΔTf = 5.12 × 0.50 = 2.56 K; i = 1.536/2.56 = 0.60; α = 2(1 − 0.60) = 0.80 |