Chapter 7 of 11 · 24 min read

Chapter 5: Relative Lowering of Vapour Pressure and Boiling Point Elevation

A non-volatile solute lowers the vapour pressure of the solvent, and the relative lowering equals the mole fraction of the solute. Because the vapour pressure is lower, the solution must be heated more to boil: ΔTb = Kb × m. Both results let us find the molar mass of an unknown solute.

What you will learn

  • What colligative properties are and the conditions under which the simple formulas hold.

  • Relative lowering of vapour pressure, its derivation from Raoult's law and its use for molar mass.

  • Why a solution boils at a higher temperature than the pure solvent.

  • ΔTb = Kb m, the meaning and unit of Kb, and how Kb relates to the solvent's enthalpy of vaporisation.

  • Finding molar mass from boiling point elevation.

5.1 Colligative properties

Some properties of a dilute solution depend only on the number of solute particles, not on what those particles are. These are colligative properties (Latin colligare, to bind together). One mole of glucose and one mole of urea in the same amount of water have the same effect.

There are four:

  1. Relative lowering of vapour pressure

  2. Elevation of boiling point

  3. Depression of freezing point

  4. Osmotic pressure

The simple formulas in this chapter and the next hold when the solution is dilute, the solute is non-volatile, and the solute neither dissociates nor associates. Chapter 7 handles solutes that do.

5.2 Relative lowering of vapour pressure

From Chapter 3, the vapour pressure of a solution of a non-volatile solute (component 2) in a solvent (component 1) is:

p1=x1 p1∘p_1 = x_1 \, p_1^{\circ}

The lowering of vapour pressure is:

Δp1=p1∘−p1=p1∘−x1p1∘=p1∘(1−x1)=x2 p1∘\Delta p_1 = p_1^{\circ} - p_1 = p_1^{\circ} - x_1 p_1^{\circ} = p_1^{\circ}(1 - x_1) = x_2 \, p_1^{\circ}

Divide by p°₁ to get the relative lowering of vapour pressure:

p1∘−p1p1∘=x2=n2n1+n2\frac{p_1^{\circ} - p_1}{p_1^{\circ}} = x_2 = \frac{n_2}{n_1 + n_2}

The relative lowering equals the mole fraction of the solute. It depends only on how many solute particles are present, so it is colligative. It does not depend on the nature of the solute.

Molar mass from RLVP. For a dilute solution, n₂ is tiny compared with n₁, so n₁ + n₂ ≈ n₁.

p1∘−p1p1∘≈n2n1=w2 M1M2 w1\frac{p_1^{\circ} - p_1}{p_1^{\circ}} \approx \frac{n_2}{n_1} = \frac{w_2 \, M_1}{M_2 \, w_1}

Rearranging gives the molar mass of the solute:

M2=w2 M1 p1∘w1 (p1∘−p1)M_2 = \frac{w_2 \, M_1 \, p_1^{\circ}}{w_1 \, (p_1^{\circ} - p_1)}

Here w₂ and w₁ are masses of solute and solvent, and M₁ is the molar mass of the solvent. When a question says "use the exact relation", use the form below. It follows from x₂/x₁ = n₂/n₁ and needs no approximation.

p1∘−p1p1=n2n1\frac{p_1^{\circ} - p_1}{p_1} = \frac{n_2}{n_1}

5.3 Why a solution boils at a higher temperature

A liquid boils when its vapour pressure equals the outside pressure. Pure water reaches 1.013 bar (1 atm) at 373.15 K.

Add a non-volatile solute and the vapour pressure drops at every temperature. At 373.15 K, the solution has not yet reached 1 atm. You must heat it further. So the boiling point of a solution is always higher than that of the pure solvent. This is the elevation of boiling point.

ΔTb=Tb−Tb∘\Delta T_b = T_b - T_b^{\circ}

In the plot of vapour pressure against temperature, the solution's curve lies below the solvent's curve at every point. The horizontal gap where each curve meets 1 atm is ΔTb.

Figure 5.1 · Vapour pressure against temperature: elevation of boiling point
Figure 5.1 · Vapour pressure against temperature: elevation of boiling point

The pure solvent reaches 1 atm at Tb°; the solution, with its lower vapour pressure, reaches 1 atm only at the higher temperature Tb, and the gap is ΔTb.

Salty water for boiling pasta does boil slightly above 100 °C. With a pinch of salt the effect is tiny. With a lot of sugar, as in making syrup for gulab jamun, it is clearly larger.

5.4 ΔTb = Kb m

For dilute solutions, experiments show ΔTb is directly proportional to the molality of the solute.

ΔTb=Kb m\Delta T_b = K_b \, m

Kb is the boiling point elevation constant, also called the molal elevation constant or ebullioscopic constant. It is the elevation in boiling point for a 1 molal solution. Its unit is K kg mol⁻¹. It depends only on the solvent.

Put in the definition of molality, m = (w₂ × 1000)/(M₂ × w₁), with w₁ in grams:

ΔTb=Kb×1000×w2M2×w1⇒M2=1000 Kb w2ΔTb w1\Delta T_b = \frac{K_b \times 1000 \times w_2}{M_2 \times w_1} \qquad \Rightarrow \qquad M_2 = \frac{1000 \, K_b \, w_2}{\Delta T_b \, w_1}

This is how chemists find the molar mass of a new compound: dissolve a known mass and measure the rise in boiling point.

Kb from thermodynamics. Kb can be calculated from properties of the pure solvent.

Kb=R (Tb∘)2 M11000×ΔvapHK_b = \frac{R \, (T_b^{\circ})^2 \, M_1}{1000 \times \Delta_{\text{vap}} H}

Here M₁ is in g mol⁻¹, ΔvapH in J mol⁻¹ and R = 8.314 J K⁻¹ mol⁻¹. A solvent with a high boiling point and a low enthalpy of vaporisation has a large Kb.

SolventBoiling point (K)Kb (K kg mol⁻¹)
Water373.150.52
Ethanol351.51.20
Diethyl ether307.82.02
Benzene353.32.53
Acetic acid391.13.07
Chloroform334.43.63
Carbon tetrachloride350.05.03

Water has a small Kb, so aqueous ΔTb values are small. That is why freezing point (Chapter 6) is used more often for aqueous solutions.

Link between RLVP and ΔTb. For a dilute solution, x₂ ≈ n₂/n₁ = m × M₁/1000. So both RLVP and ΔTb are proportional to the molality. Knowing one, you can find the other.

Worked example 5.1: 18 g of glucose (0.10 mol) is dissolved in 178.2 g of water (9.9 mol). The vapour pressure of water at 30 °C is 31.8 mm Hg. Find the relative lowering and the vapour pressure of the solution.

Solution: x₂ = 0.10/(0.10 + 9.9) = 0.010. Δp = 0.010 × 31.8 = 0.318 mm Hg. p = 31.8 − 0.318 = 31.48 mm Hg.

Worked example 5.2: 2.0 g of a non-volatile solute in 50 g of benzene (M = 78) lowers its vapour pressure from 640 mm Hg to 632 mm Hg. Find the molar mass of the solute (dilute approximation).

Solution: Relative lowering = 8/640 = 0.0125. M₂ = w₂ M₁ p°/(w₁ Δp) = 2.0 × 78/(50 × 0.0125) = about 250 g mol⁻¹. (The exact relation gives 246 g mol⁻¹.)

Worked example 5.3: 3.0 g of urea (M = 60) is dissolved in 100 g of water. Find the boiling point of the solution. Kb(water) = 0.52 K kg mol⁻¹.

Solution: m = (3.0/60)/0.100 = 0.50 mol kg⁻¹. ΔTb = 0.52 × 0.50 = 0.26 K. Tb = 373.15 + 0.26 = 373.41 K.

Worked example 5.4: 1.8 g of a non-volatile solute in 50 g of benzene raises its boiling point by 0.506 K. Kb(benzene) = 2.53 K kg mol⁻¹. Find the molar mass.

Solution: M₂ = 1000 × 2.53 × 1.8/(0.506 × 50) = 180 g mol⁻¹.

Worked example 5.5: Calculate Kb for water. ΔvapH = 40.66 kJ mol⁻¹ and Tb = 373.15 K.

Solution: Kb = 8.314 × (373.15)² × 18/(1000 × 40 660) = 0.512 K kg mol⁻¹. This matches the table value of 0.52.

Worked example 5.6: 0.20 m solutions of two non-electrolytes are made, one in water and one in benzene. Which boils with the larger elevation, and by what factor?

Solution: ΔTb = Kb m, with the same m. Ratio = 2.53/0.52 = 4.9. The benzene solution shows the larger elevation because benzene has the larger Kb.

Worked example 5.7: The relative lowering of vapour pressure of a dilute aqueous solution is 0.0018. Find its boiling point elevation.

Solution: n₂/n₁ = 0.0018. Per kg of water, n₁ = 55.5 mol, so m = 0.0018 × 55.5 = 0.10 mol kg⁻¹. ΔTb = 0.52 × 0.10 = 0.052 K.

Worked example 5.8: An aqueous sucrose solution boils at 373.28 K. Find its vapour pressure at 373.15 K (p° = 760 mm Hg).

Solution: ΔTb = 0.13 K, so m = 0.13/0.52 = 0.25 mol kg⁻¹. x₂ = 0.25/(0.25 + 55.5) = 0.00448. p = 760 × (1 − 0.00448) = 756.6 mm Hg.

Quick revision

  • Colligative properties depend on the number of solute particles, not their nature.

  • RLVP: (p° − p)/p° = x₂. For dilute solutions ≈ n₂/n₁ = w₂M₁/(M₂w₁).

  • Exact form: (p° − p)/p = n₂/n₁.

  • Lower vapour pressure means higher boiling point.

  • ΔTb = Kb m; M₂ = 1000 Kb w₂/(ΔTb w₁).

  • Kb unit: K kg mol⁻¹. Kb depends only on the solvent; water 0.52, benzene 2.53.

  • Kb = R(Tb°)²M₁/(1000 ΔvapH).

NEET traps

  • Using molarity instead of molality in ΔTb = Kb m.

  • Writing the RLVP as equal to the mole fraction of the solvent. It is the solute's mole fraction.

  • Forgetting the 1000 when w₁ is in grams, or using it twice when w₁ is already in kg.

  • Thinking a solute with a larger molar mass gives a larger elevation for the same mass. The opposite is true: fewer moles.

  • Adding ΔTb to 100 when the question works in kelvin, or to 373 when it works in °C. Stay in one scale.

Practice MCQs: Chapter 5

Level 1: Concept check

1. Colligative properties depend on (a) the nature of the solute (b) the number of solute particles (c) the colour of the solution (d) the molar mass of the solvent only

2. Which is not a colligative property? (a) Relative lowering of vapour pressure (b) Elevation of boiling point (c) Osmotic pressure (d) Viscosity of the solution

3. The relative lowering of vapour pressure of a solution equals (a) the mole fraction of the solvent (b) the mole fraction of the solute (c) the molality (d) the molarity

4. The unit of Kb is (a) K mol kg⁻¹ (b) mol kg⁻¹ K⁻¹ (c) K kg mol⁻¹ (d) K⁻¹

5. The boiling point of a solution of a non-volatile solute is (a) higher than that of the pure solvent (b) lower than that of the pure solvent (c) equal to that of the pure solvent (d) unrelated to the solvent

6. In ΔTb = Kb × (concentration), the concentration term is (a) molarity (b) molality (c) mole fraction (d) mass percentage

7. The value of Kb depends on (a) the nature of the solute (b) the concentration of the solution (c) the amount of solution (d) the nature of the solvent

8. Kb is also called the (a) ebullioscopic constant (b) cryoscopic constant (c) Henry's constant (d) gas constant

9. Which aqueous solution of a non-electrolyte has the highest boiling point? (a) 0.10 m glucose (b) 0.05 m sucrose (c) 0.15 m glycerol (d) 0.20 m urea

10. Within Raoult's law, the relative lowering of vapour pressure does not depend on (a) the number of solute particles (b) the mole fraction of the solute (c) the amount of solute (d) the temperature

Level 2: NEET standard

11. The vapour pressure of water at 25 °C is 23.8 mm Hg. A solution has a solute mole fraction of 0.020. Its vapour pressure is about (a) 0.48 mm Hg (b) 23.3 mm Hg (c) 22.8 mm Hg (d) 23.8 mm Hg

12. 6.0 g of urea (M = 60) is dissolved in 180 g of water. The relative lowering of vapour pressure is about (a) 0.0099 (b) 0.099 (c) 0.033 (d) 0.99

13. The boiling point of a 0.50 m aqueous glucose solution is (Kb = 0.52 K kg mol⁻¹) (a) 373.67 K (b) 372.89 K (c) 374.08 K (d) 373.41 K

14. 2.5 g of a non-electrolyte in 100 g of water raises the boiling point by 0.13 K. Its molar mass is (Kb = 0.52 K kg mol⁻¹) (a) 50 g mol⁻¹ (b) 100 g mol⁻¹ (c) 200 g mol⁻¹ (d) 130 g mol⁻¹

15. 1.28 g of sulphur in 50 g of benzene raises the boiling point by 0.253 K (Kb = 2.53 K kg mol⁻¹). The molar mass of sulphur in solution is (a) 128 g mol⁻¹ (b) 64 g mol⁻¹ (c) 256 g mol⁻¹ (d) 512 g mol⁻¹

16. 5.0 g of a non-volatile solute in 100 g of water gives a relative lowering of vapour pressure of 0.0050. The molar mass of the solute is about (a) 90 g mol⁻¹ (b) 180 g mol⁻¹ (c) 342 g mol⁻¹ (d) 60 g mol⁻¹

17. For water, ΔvapH = 40.7 kJ mol⁻¹ and Tb = 373 K. The calculated Kb is about (a) 0.512 K kg mol⁻¹ (b) 1.86 K kg mol⁻¹ (c) 5.12 K kg mol⁻¹ (d) 0.0512 K kg mol⁻¹

18. A non-volatile non-electrolyte gives 0.10 m solutions in water (Kb = 0.52) and in benzene (Kb = 2.53). The ratio ΔTb(benzene)/ΔTb(water) is about (a) 1 (b) 0.21 (c) 4.9 (d) 2.0

19. On a vapour pressure against temperature plot, the curve of a solution of a non-volatile solute lies (a) above the pure solvent curve (b) below the pure solvent curve (c) above it at low temperature and below it at high temperature (d) on the pure solvent curve

20. The relative lowering of vapour pressure of a dilute aqueous solution is 0.0036. Its boiling point elevation is about (Kb = 0.52 K kg mol⁻¹) (a) 0.104 K (b) 0.052 K (c) 0.208 K (d) 0.0019 K

21. A plot of ΔTb against molality for dilute solutions in one solvent is (a) a curve rising steeply (b) a straight line with slope 1/Kb (c) a horizontal line (d) a straight line through the origin with slope Kb

22. Equal masses of glucose (M = 180) and urea (M = 60) are dissolved separately in equal masses of water. The ratio ΔTb(urea)/ΔTb(glucose) is (a) 1/3 (b) 1 (c) 3 (d) 9

Level 3: Challenge

23. The vapour pressure of benzene (M = 78) is 640 mm Hg. 2.0 g of a non-volatile solute in 39.0 g of benzene gives a vapour pressure of 600 mm Hg. Using the exact relation (p° − p)/p = n₂/n₁, the molar mass of the solute is (a) 60 g mol⁻¹ (b) 56 g mol⁻¹ (c) 64 g mol⁻¹ (d) 75 g mol⁻¹

24. An aqueous solution of a non-electrolyte boils at 100.26 °C. Its vapour pressure at 100 °C is about (Kb = 0.52 K kg mol⁻¹) (a) 756 mm Hg (b) 740 mm Hg (c) 753 mm Hg (d) 758 mm Hg

25. 10 g of a non-volatile solute in 100 g of a solvent (Kb = 2.0 K kg mol⁻¹) raises the boiling point by 0.40 K. The molar mass of the solute is (a) 250 g mol⁻¹ (b) 500 g mol⁻¹ (c) 1000 g mol⁻¹ (d) 50 g mol⁻¹

26. A solvent (M = 80 g mol⁻¹) boils at 350 K and has ΔvapH = 35 kJ mol⁻¹. Its Kb is about (a) 0.233 K kg mol⁻¹ (b) 23.3 K kg mol⁻¹ (c) 1.16 K kg mol⁻¹ (d) 2.33 K kg mol⁻¹

27. Which pair of aqueous solutions has the same boiling point? (a) 3 g urea in 100 g water and 18 g glucose in 200 g water (b) 3 g urea in 100 g water and 9 g glucose in 200 g water (c) 6 g urea in 100 g water and 9 g glucose in 100 g water (d) 3 g urea in 200 g water and 18 g glucose in 100 g water

28. Which statement is wrong? (a) ΔTb is proportional to molality in dilute solutions (b) Kb depends on the solvent (c) Adding a non-volatile solute lowers the boiling point (d) The relative lowering of vapour pressure equals the mole fraction of solute

29. Assertion (A): Relative lowering of vapour pressure is a colligative property. Reason (R): For a given solvent, the relative lowering depends on the chemical nature of the solute. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Kb of water is larger than Kb of benzene. Statement II: Kb of a solvent can be calculated from its boiling point, molar mass and enthalpy of vaporisation. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bDefinition of colligative
2dViscosity depends on the nature of the solute
3b(p° − p)/p° = x₂
4cKb = ΔTb/m
5aLower vapour pressure needs a higher temperature to reach 1 atm
6bMolality does not change on heating
7dKb is a solvent property
8aEbullio-, boiling
9dHighest molality gives the largest ΔTb
10dx₂ alone fixes the relative lowering
11b0.98 × 23.8 = 23.3 mm Hg
12a0.10/(0.10 + 10.0) = 0.0099
13d373.15 + 0.26 = 373.41 K
14b1000 × 0.52 × 2.5/(0.13 × 100) = 100
15c1000 × 2.53 × 1.28/(0.253 × 50) = 256, so S₈
16b5.0 × 18/(100 × 0.0050) = 180
17a8.314 × 373² × 18/(1000 × 40 700) = 0.512
18c2.53/0.52 = 4.9
19bSolution has lower vapour pressure at every temperature
20am = 0.0036 × 55.5 = 0.20; 0.52 × 0.20 = 0.104 K
21dΔTb = Kb m
22cUrea gives three times the moles
23an₂ = (40/600) × 0.50 = 0.0333 mol; 2.0/0.0333 = 60
24cm = 0.50; x₂ = 0.50/56.0 = 0.0089; 760 × 0.991 = 753
25b1000 × 2.0 × 10/(0.40 × 100) = 500
26d8.314 × 350² × 80/(1000 × 35 000) = 2.33
27aBoth are 0.50 m
28cA non-volatile solute raises the boiling point
29cA true; it does not depend on the nature of the solute
30dWater 0.52 is smaller than benzene 2.53; II is true

Chapter 5 revision sheet

One-page summary

  • Colligative properties depend on the number of solute particles, not on their nature: relative lowering of vapour pressure, elevation of boiling point, depression of freezing point, osmotic pressure.

  • They are exact only for dilute solutions of non-volatile, non-electrolyte solutes.

  • Lowering of vapour pressure: Δp = p° − p = x₂ p°.

  • Relative lowering: (p° − p)/p° = x₂; it depends only on the mole fraction of solute.

  • For dilute solutions: (p° − p)/p° ≈ n₂/n₁ = w₂M₁/(M₂w₁), which gives M₂ = w₂M₁p°/(w₁Δp).

  • A non-volatile solute lowers vapour pressure, so a higher temperature is needed to reach 1 atm: boiling point rises.

  • ΔTb = Kb × m, where m is molality.

  • Kb (ebullioscopic constant) is ΔTb for a 1 molal solution; unit K kg mol⁻¹; it depends only on the solvent.

  • Molar mass from ΔTb: M₂ = 1000 Kb w₂/(ΔTb w₁).

  • Kb = R Tb² M₁/(1000 ΔvapH), with M₁ in g mol⁻¹ and ΔvapH in J mol⁻¹.

  • Kb of water = 0.52 K kg mol⁻¹ (benzene 2.53, ethanol 1.20, chloroform 3.63).

  • For water: m ≈ 55.5 × (relative lowering) for dilute solutions, which links vapour pressure data to ΔTb.

Must-remember table

QuantityFormulaUnit
Lowering of vapour pressureΔp = x₂ p°mm Hg, bar
Relative loweringΔp/p° = x₂none
Molar mass from relative loweringM₂ = w₂M₁p°/(w₁Δp)g mol⁻¹
Elevation of boiling pointΔTb = Kb mK
Molar mass from ΔTbM₂ = 1000 Kb w₂/(ΔTb w₁)g mol⁻¹
Ebullioscopic constantKb = R Tb² M₁/(1000 ΔvapH)K kg mol⁻¹
Kb of water0.52K kg mol⁻¹

Memory aids

  • "Colligative = Count, not Character": only the number of particles matters.

  • "Relative Lowering = Little x₂": the relative lowering is just the solute's mole fraction.

  • "Really Tall Mountains over a Thousand Hills": Kb = R Tb² M₁ / (1000 ΔvapH).

  • "Point-five-two for the pot of water": Kb of water is 0.52 K kg mol⁻¹.

  • "Lower vapour, later boil": lower vapour pressure means the solution must be hotter to boil.

Concept connections

  • Chemistry Book 4: Chemical Thermodynamics: ΔvapH and boiling as a phase equilibrium give the Kb formula.

  • Chemistry Book 1: Some Basic Concepts in Chemistry: molar mass found here checks empirical and molecular formulas.

  • Physics Book 8: Thermodynamics: latent heat and phase change link to boiling point elevation.

Practice MCQs: Chapter 5, Level 4 (new NEET pattern)

31. Match List I with List II.

List I:

  • A. Relative lowering of vapour pressure

  • B. Elevation of boiling point

  • C. Ebullioscopic constant from solvent data

  • D. Molar mass of solute from vapour pressure data (dilute)

List II:

  • i. Kb = R Tb² M₁/(1000 ΔvapH)

  • ii. M₂ = w₂M₁p°/(w₁(p° − p))

  • iii. (p° − p)/p° = x₂

  • iv. ΔTb = Kb m

(a) A-iii, B-iv, C-ii, D-i (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii

32. Match List I with List II.

List I (quantity):

  • A. Kb

  • B. Relative lowering of vapour pressure

  • C. Molality

  • D. ΔvapH used in the Kb formula

List II (unit):

  • i. J mol⁻¹

  • ii. mol kg⁻¹

  • iii. K kg mol⁻¹

  • iv. No unit

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-i, B-iv, C-ii, D-iii

33. For aqueous solutions (Kb = 0.52 K kg mol⁻¹), match List I with List II.

List I (solution):

  • A. 0.1 m glucose

  • B. 0.5 m urea

  • C. 1 m sucrose

  • D. 0.25 m glycerol

List II (ΔTb):

  • i. 0.13 K

  • ii. 0.52 K

  • iii. 0.052 K

  • iv. 0.26 K

(a) A-iii, B-ii, C-iv, D-i (b) A-i, B-iv, C-ii, D-iii (c) A-iii, B-i, C-ii, D-iv (d) A-iii, B-iv, C-ii, D-i

34. Match List I with List II.

List I (term):

  • A. Ebullioscopic constant

  • B. Colligative property

  • C. Normal boiling point

  • D. Relative lowering of vapour pressure

List II (meaning):

  • i. Temperature at which vapour pressure equals 1 atm

  • ii. ΔTb of a 1 molal solution

  • iii. (p° − p)/p°

  • iv. Depends only on the number of solute particles

(a) A-ii, B-iv, C-i, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-iv, B-ii, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i

35. How many of the following statements are correct?

  • A. Kb depends on the solvent and not on the solute.

  • B. The relative lowering of vapour pressure of a given solution changes with temperature.

  • C. For dilute solutions, ΔTb is directly proportional to molality.

  • D. Adding common salt to water lowers its boiling point.

(a) 2 (b) 3 (c) 1 (d) 4

36. Choose the correct set of statements.

  • A. Kb of water is 0.52 K kg mol⁻¹.

  • B. Kb equals ΔTb for a 1 molal solution (assuming dilute-solution behaviour holds).

  • C. A solute that dissociates gives a molar mass from ΔTb that is higher than its true value.

  • D. Boiling point elevation is the best method for finding molar masses of proteins.

(a) A, B and C only (b) C and D only (c) A and B only (d) B and D only

37. How many of the following statements are correct?

  • A. Lowering of vapour pressure Δp = x₂ p°.

  • B. For the same mole fraction of solute, Δp is larger at a higher temperature.

  • C. Relative lowering of vapour pressure is a colligative property.

  • D. For the same mole fraction of solute, Δp is the same in every solvent.

(a) 1 (b) 2 (c) 4 (d) 3

38. Choose the correct set of statements about Kb = R Tb² M₁/(1000 ΔvapH).

  • A. A larger enthalpy of vaporisation gives a smaller Kb.

  • B. Other factors equal, a solvent with a higher boiling point has a larger Kb.

  • C. Kb has the same value for all solvents.

  • D. Other factors equal, a solvent with a larger molar mass has a larger Kb.

(a) A and C only (b) A, B and D only (c) B, C and D only (d) A and D only

39. A graph of vapour pressure against temperature shows two curves: pure benzene and a solution of a non-volatile solute in benzene. The solution curve lies below. The 760 mm Hg line cuts the benzene curve at 353.0 K and the solution curve at 353.5 K. Kb of benzene is 2.53 K kg mol⁻¹. The molality of the solution is about

(a) 0.20 mol kg⁻¹ (b) 0.50 mol kg⁻¹ (c) 0.10 mol kg⁻¹ (d) 1.26 mol kg⁻¹

40. For dilute solutions of one solute in an unknown solvent, a plot of ΔTb (y-axis) against molality (x-axis) is a straight line through the origin with slope 1.20 K kg mol⁻¹. Using the table, identify the solvent.

SolventKb (K kg mol⁻¹)
Water0.52
Benzene2.53
Ethanol1.20
Chloroform3.63

(a) Water (b) Benzene (c) Ethanol (d) Chloroform

41. 2.0 g of a non-volatile solute X in 100 g of water gives a relative lowering of vapour pressure of 0.0036. Using the dilute-solution form (p° − p)/p° ≈ n₂/n₁, the molar mass of X is

(a) 50 g mol⁻¹ (b) 100 g mol⁻¹ (c) 200 g mol⁻¹ (d) 360 g mol⁻¹

Read the passage and answer Q42 and Q43. A cook dissolves 171 g of sucrose (M = 342 g mol⁻¹) in 500 g of water to make syrup at sea level. Take Kb of water as 0.52 K kg mol⁻¹ and assume ideal dilute behaviour.

42. The molality of the syrup is

(a) 0.5 mol kg⁻¹ (b) 2.0 mol kg⁻¹ (c) 0.25 mol kg⁻¹ (d) 1.0 mol kg⁻¹

43. The boiling point of the syrup is about

(a) 373.52 K (b) 373.26 K (c) 374.04 K (d) 372.48 K

44. 1.5 g of a non-volatile solute dissolved in 50 g of benzene raises its boiling point by 0.506 K. Kb of benzene is 2.53 K kg mol⁻¹. The molar mass of the solute is

(a) 75 g mol⁻¹ (b) 300 g mol⁻¹ (c) 150 g mol⁻¹ (d) 15 g mol⁻¹

45. An aqueous solution of a non-volatile non-electrolyte shows a relative lowering of vapour pressure of 0.018. Using m ≈ (relative lowering) × 1000/18 for a dilute solution and Kb = 0.52 K kg mol⁻¹, the elevation in boiling point is about

(a) 0.26 K (b) 0.52 K (c) 1.04 K (d) 0.018 K

Level 4 answer key

QAnsReason
31bStandard formulas for relative lowering, ΔTb, Kb and M₂
32cKb in K kg mol⁻¹; relative lowering has no unit; ΔvapH in J mol⁻¹
33dΔTb = 0.52 × m: 0.052, 0.26, 0.52, 0.13 K
34aKb is ΔTb at 1 m; normal boiling point is at 1 atm
35aA and C true; relative lowering equals x₂ at any temperature; salt raises boiling point
36cDissociation gives a lower apparent molar mass; proteins use osmotic pressure
37dA, B, C true; Δp depends on p°, which differs between solvents
38bKb rises with Tb² and M₁, falls with ΔvapH; it differs between solvents
39am = ΔTb/Kb = 0.5/2.53 = 0.20 mol kg⁻¹
40cSlope of ΔTb vs m is Kb = 1.20, which matches ethanol
41b(2.0/M)/(100/18) = 0.0036, so M = 0.36/0.0036 = 100
42d171/342 = 0.50 mol in 0.500 kg gives 1.0 m
43aΔTb = 0.52 × 1.0 = 0.52 K; water boils at 373 K (book convention), so 373 + 0.52 = 373.52 K
44cM = 1000 × 2.53 × 1.5/(0.506 × 50) = 150
45bm ≈ 0.018 × 1000/18 = 1.0; ΔTb = 0.52 K
24 min left
‹
›