Chapter 12 of 12 · 13 min read

Last-Week Revision Kit

Use this kit in the final week: one read of the glance sheet each day, the facts and checklist the night before, and Mock Test 2 under time.

Book-at-a-glance sheet

Chapters 1–2: Physical equilibria, Kc and Kp

IdeaFormula or fact
EquilibriumForward rate = reverse rate; both non-zero
Henry's lawp = K_H x; larger K_H, lower solubility
Equilibrium constantKc = [products]^coeff / [reactants]^coeff
Kp–Kc linkKp = Kc(RT)^Δn_g
Units of Kc(mol L⁻¹)^Δn
ManipulationReverse 1/K; ×n gives K^n; add gives K₁K₂
DirectionQ < K forward; Q > K backward

Chapters 3–4: Free energy and Le Chatelier

IdeaFormula or fact
Free energy at any momentΔG = ΔG° + 2.303RT log Q
Standard free energyΔG° = −2.303RT log K = −5.71 log K kJ at 298 K
PCl₅ dissociationKp = α²P/(1 − α²)
N₂O₄ dissociationKp = 4α²P/(1 − α²)
Vapour density methodα = (D − d)/[(n − 1)d]
Only factor changing KTemperature
CatalystFaster equilibrium, no shift
Inert gasConstant V: no shift; constant P: toward more gas moles

Chapters 5–6: Acids, bases and pH

IdeaFormula or fact
Ostwald dilution lawα = √(Ka/C); [H⁺] = √(Ka C)
Conjugate pairKa × Kb = Kw; pKa + pKb = 14 (298 K)
Ionic product of waterKw = 1.0 × 10⁻¹⁴ at 298 K; rises with T
pH−log[H⁺]; pH + pOH = 14 at 298 K
Weak acid pH½(pKa − log C)
Weak base pOH½(pKb − log C)

Chapters 7–8: Hydrolysis, buffers, Ksp

IdeaFormula or fact
Salt of weak acid + strong basepH = 7 + ½(pKa + log C)
Salt of strong acid + weak basepH = 7 − ½(pKb + log C)
Salt of weak acid + weak basepH = 7 + ½(pKa − pKb)
Acidic bufferpH = pKa + log([salt]/[acid])
Basic bufferpOH = pKb + log([salt]/[base])
Ksp templatess², 4s³, 27s⁴, 108s⁵
PrecipitationIonic product > Ksp
Common ion (AB in c M)s = Ksp/c

40 rapid-fire facts

  1. Equilibrium is dynamic: forward and reverse processes continue at equal rates.

  2. Equilibrium can be reached from either direction in a closed system.

  3. At 1 atm, ice and water coexist only at 273 K.

  4. Pressure lowers the melting point of ice.

  5. Vapour pressure depends only on the liquid and the temperature.

  6. A liquid boils when its vapour pressure equals the outside pressure.

  7. Gas solubility falls as temperature rises.

  8. Henry's law fails for gases that react with water, such as NH₃ and HCl.

  9. Pure solids and pure liquids never appear in K.

  10. Kp = Kc whenever Δn_g = 0.

  11. K for the reverse reaction is 1/K.

  12. K does not depend on starting amounts, pressure or catalyst; only on temperature.

  13. A large K (above 10³) means the reaction goes nearly to completion.

  14. K says how far a reaction goes, not how fast.

  15. ΔG = 0 at equilibrium.

  16. ΔG° = 0 means K = 1.

  17. A factor of 10 in K equals 5.71 kJ mol⁻¹ of ΔG° at 298 K.

  18. For an endothermic reaction, K increases with temperature.

  19. For an exothermic reaction, K decreases with temperature.

  20. Higher pressure favours the side with fewer gas moles.

  21. A catalyst lowers activation energy for both directions equally.

  22. Inert gas at constant volume does not disturb an equilibrium.

  23. The Haber process runs at about 200 atm and 700 K with an iron catalyst.

  24. A conjugate acid–base pair differs by one proton.

  25. BF₃ and AlCl₃ are Lewis acids because of an incomplete octet.

  26. Water, HCO₃⁻ and HS⁻ are amphiprotic.

  27. The degree of ionisation of a weak electrolyte increases on dilution.

  28. For polyprotic acids, Ka1 > Ka2 > Ka3.

  29. Kw = 1.0 × 10⁻¹⁴ at 298 K and rises with temperature.

  30. Pure water is neutral at every temperature, though its pH is below 7 when hot.

  31. Diluting an acid can never make its pH exceed 7.

  32. Human blood has a pH of about 7.4; gastric juice about 1.2.

  33. NaCl solution is neutral; CH₃COONa is basic; NH₄Cl is acidic.

  34. The pH of CH₃COONH₄ solution does not depend on its concentration.

  35. Buffer capacity is greatest when [salt] = [acid], where pH = pKa.

  36. Half-neutralisation of a weak acid gives pH = pKa.

  37. Blood's main buffer is H₂CO₃/HCO₃⁻.

  38. Ksp changes only with temperature; a common ion lowers solubility, not Ksp.

  39. Group II sulphides precipitate in acid medium because H⁺ keeps [S²⁻] low.

  40. NH₄Cl is added with NH₄OH in Group III to keep [OH⁻] low.

Common mistakes checklist

  • I count only gaseous species when finding Δn_g.

  • I don't put solids or pure liquids into K or Q expressions.

  • I don't confuse "K changes" with "equilibrium position shifts".

  • I don't confuse ΔG (any moment) with ΔG° (standard, fixed at a given T).

  • I can tell inert gas at constant volume (no shift) from inert gas at constant pressure (shift).

  • I add moles of H⁺ or OH⁻ when mixing, and never average pH values.

  • I include water's own H⁺ for very dilute acids like 10⁻⁸ M HCl.

  • I don't assume pH 7 is neutral at temperatures other than 298 K.

  • I compare Ksp values directly only for salts of the same formula type.

  • I put salt in the numerator in the Henderson equation and use pOH for basic buffers.

Mock Test 2: New-pattern paper

Time: 35 minutes. Marking: +4 for a correct answer, −1 for a wrong one. Take 298 K, Kw = 1.0 × 10⁻¹⁴, R = 0.0821 L atm K⁻¹ mol⁻¹ and 2.303RT = 5.71 kJ mol⁻¹ unless stated.

1. For 2NO₂(g) ⇌ N₂O₄(g), Kp = 0.50 atm⁻¹ at 300 K. Kc at 300 K is about:

(a) 0.020 L mol⁻¹ (b) 6.1 L mol⁻¹ (c) 12.3 L mol⁻¹ (d) 0.50 L mol⁻¹

2. For a reaction at 298 K, K = 1.0 × 10⁻⁵. ΔG° is about:

(a) +28.6 kJ mol⁻¹ (b) −28.6 kJ mol⁻¹ (c) +5.71 kJ mol⁻¹ (d) −11.4 kJ mol⁻¹

3. Assertion (A): Adding argon at constant volume to N₂ + 3H₂ ⇌ 2NH₃ at equilibrium does not change the amount of NH₃. Reason (R): Adding argon raises the total pressure in the vessel. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

4. Match List I (0.10 M solution) with List II (pH). Ka of CH₃COOH = Kb of NH₃ = 1.8 × 10⁻⁵.

List IList II
A. HCli. 13.0
B. CH₃COOHii. 1.0
C. NaOHiii. 11.13
D. NH₃iv. 2.87

(a) A-ii, B-iii, C-i, D-iv (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-iv, C-i, D-iii

5. The pH of 0.020 M Ba(OH)₂ (fully ionised) is:

(a) 12.30 (b) 12.60 (c) 1.40 (d) 13.00

6. How many of the following statements are correct?

  • A. A mixture of NH₄OH and NH₄Cl is a basic buffer.

  • B. A buffer has pH = pKa when [salt] = [acid].

  • C. Adding a little NaOH to an acetate buffer lowers its pH.

  • D. A buffer can absorb any amount of acid without a change in pH.

  • E. The pH of blood is held mainly by the H₂CO₃/HCO₃⁻ buffer.

(a) One (b) Two (c) Three (d) Four

7. A salt AB₂ has a molar solubility of 1.0 × 10⁻³ M. Its Ksp is:

(a) 1.0 × 10⁻⁶ (b) 2.0 × 10⁻⁹ (c) 1.0 × 10⁻⁹ (d) 4.0 × 10⁻⁹

8. At the same temperature, a graph of partial pressure p (y-axis) against mole fraction in solution x (x-axis) is drawn for gases X and Y. Both are straight lines through the origin; the line for X is steeper. Which is correct?

(a) X is more soluble than Y (b) Y is more soluble, because K_H of X is larger (c) Both gases are equally soluble (d) Neither gas obeys Henry's law

9. Statement I: For CaCO₃(s) ⇌ CaO(s) + CO₂(g), Kp = p(CO₂). Statement II: At a given temperature, the equilibrium pressure of CO₂ does not depend on how much CaCO₃ is present. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

10. The theoretical vapour density of PCl₅ is 104.25. At a certain temperature, the observed vapour density of the equilibrium mixture is 69.5. The degree of dissociation of PCl₅ is:

(a) 0.33 (b) 0.25 (c) 0.50 (d) 0.67

11. For a gas reaction, a graph of log Kp (y-axis) against temperature T (x-axis) rises steadily as T increases. Which is correct?

(a) The forward reaction is exothermic (b) A catalyst caused the rise (c) ΔH° = 0 (d) The forward reaction is endothermic

Passage for Q12–Q13: A biology lab in Pune keeps 0.10 M formic acid (HCOOH) for preserving specimens. Ka of formic acid is 1.8 × 10⁻⁴ at 298 K. A student is asked to estimate its ionisation using Ostwald's dilution law.

12. The degree of ionisation of formic acid in this solution is about:

(a) 1.3% (b) 4.2% (c) 0.42% (d) 18%

13. The pH of the solution is about:

(a) 2.37 (b) 3.37 (c) 1.00 (d) 2.87

14. Assertion (A): The pH of 1.0 × 10⁻⁸ M HCl is slightly less than 7. Reason (R): H⁺ from the ionisation of water (about 10⁻⁷ M) must be added to H⁺ from the acid. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

15. Match List I (salt) with List II (hydrolysis constant Kh).

List IList II
A. CH₃COONai. Kw/(Ka Kb)
B. NH₄Clii. Kw/Kb
C. CH₃COONH₄iii. No hydrolysis
D. NaCliv. Kw/Ka

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-i, C-ii, D-iii (c) A-iv, B-ii, C-i, D-iii (d) A-iv, B-ii, C-iii, D-i

16. The table gives Ksp of AgCl at three temperatures.

Temperature (K)288298323
Ksp1.0 × 10⁻¹⁰1.8 × 10⁻¹⁰1.3 × 10⁻⁹

Which conclusion is correct?

(a) Dissolution of AgCl is exothermic (b) Dissolution of AgCl is endothermic, so its solubility rises with T (c) Ksp is independent of T (d) AgCl becomes less soluble on heating

17. Choose the correct set of statements about units.

  • A. Kc for N₂(g) + 3H₂(g) ⇌ 2NH₃(g) has units L² mol⁻².

  • B. Kp for PCl₅(g) ⇌ PCl₃(g) + Cl₂(g) has units atm.

  • C. Kc for H₂(g) + I₂(g) ⇌ 2HI(g) has units mol L⁻¹.

  • D. Kp for N₂O₄(g) ⇌ 2NO₂(g) has units atm.

(a) A and C only (b) B and C only (c) A, B, C and D (d) A, B and D only

18. For a reaction at 298 K, ΔG° = −17.1 kJ mol⁻¹. K is about:

(a) 10⁻³ (b) 10 (c) 10³ (d) 10¹⁷

19. Statement I: For H₂(g) + I₂(g) ⇌ 2HI(g) at equilibrium, compressing the mixture does not change the number of moles of HI. Statement II: For this reaction, Kp = Kc. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

20. A weak monobasic acid has Ka = 1.0 × 10⁻⁵. Its degree of ionisation in 0.10 M solution is about:

(a) 0.1% (b) 1.0% (c) 10% (d) 0.01%

Passage for Q21–Q22: Normal rainwater has pH 5.6 because of dissolved CO₂. After a storm over an industrial town, rain collected in a clean dish has pH 4.6 at 298 K.

21. [H⁺] in the storm rain is how many times that in normal rain?

(a) 1 (b) 2 (c) 100 (d) 10

22. [OH⁻] in the storm rain is about:

(a) 2.5 × 10⁻⁵ M (b) 4.0 × 10⁻⁹ M (c) 4.0 × 10⁻¹⁰ M (d) 1.0 × 10⁻⁷ M

23. A buffer contains 0.20 M NH₃ and 0.10 M NH₄Cl (pKb of NH₃ = 4.74, log 2 = 0.30). Its pH is about:

(a) 9.56 (b) 8.96 (c) 4.44 (d) 9.26

24. Assertion (A): AgCl is more soluble in aqueous NH₃ than in pure water. Reason (R): NH₃ forms [Ag(NH₃)₂]⁺, which lowers free [Ag⁺] so the ionic product falls below Ksp. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

25. CaC₂O₄ is a sparingly soluble salt of a weak acid. How many of these increase its molar solubility in water?

  • A. Adding dilute HCl

  • B. Adding CaCl₂

  • C. Adding Na₂C₂O₄

  • D. Adding more solid CaC₂O₄

(a) None (b) One (c) Two (d) Three

26. Match List I (equilibrium) with List II (effect of raising temperature).

List IList II
A. N₂ + 3H₂ ⇌ 2NH₃, ΔH < 0i. K increases; more NO forms
B. N₂ + O₂ ⇌ 2NO, ΔH > 0ii. Vapour pressure rises
C. H₂O(l) ⇌ H₂O(g)iii. K decreases; less NH₃
D. H₂O(l) ⇌ H⁺(aq) + OH⁻(aq)iv. Kw rises; pH of pure water falls

(a) A-i, B-iii, C-ii, D-iv (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-ii, C-i, D-iv (d) A-iii, B-i, C-ii, D-iv

27. At a certain temperature, K₁ = 4.0 × 10⁻⁴ for N₂(g) + O₂(g) ⇌ 2NO(g) and K₂ = 1.0 × 10² for 2NO(g) + O₂(g) ⇌ 2NO₂(g). K for NO₂(g) ⇌ ½N₂(g) + O₂(g) is:

(a) 0.20 (b) 25 (c) 5.0 (d) 0.040

28. For N₂O₄(g) ⇌ 2NO₂(g), Kp = 1.33 atm at a certain temperature. At a total pressure of 1.0 atm, the degree of dissociation is about:

(a) 0.33 (b) 0.50 (c) 0.25 (d) 0.67

29. 50 mL of 0.10 M CH₃COOH is mixed with 50 mL of 0.10 M NaOH (pKa = 4.74, log 5 = 0.70). The pH of the mixture is about:

(a) 7.00 (b) 4.74 (c) 9.26 (d) 8.72

30. A solution contains 1.0 × 10⁻³ M Fe³⁺. Ksp of Fe(OH)₃ = 1.0 × 10⁻³⁸. Fe(OH)₃ begins to precipitate at a pH of about:

(a) 2.33 (b) 11.67 (c) 3.00 (d) 4.33

Mock Test 2 answer key

QAnsReason
1cΔn_g = −1, so Kc = Kp × RT = 0.50 × 24.6 = 12.3
2aΔG° = −5.71 × (−5) = +28.6 kJ
3bPartial pressures of reacting gases do not change; total pressure rise is not the reason
4dpH 1; ½(4.74 + 1) = 2.87; 13; 14 − 2.87 = 11.13
5b[OH⁻] = 0.040 M, pOH 1.40, pH 12.60
6cA, B, E true; NaOH raises pH slightly; capacity is limited
7dKsp = 4s³ = 4 × 10⁻⁹
8bSlope = K_H; larger K_H means lower solubility
9aSolids are left out of K, so their amount does not matter
10cα = (104.25 − 69.5)/69.5 = 0.50
11dK rising with T means ΔH° > 0
12bα = √(1.8 × 10⁻⁴/0.10) = 0.042
13a[H⁺] = 4.24 × 10⁻³ M, pH 2.37
14aTotal [H⁺] = 1.05 × 10⁻⁷ M, pH 6.98
15cKh = Kw/Ka, Kw/Kb, Kw/(KaKb); NaCl does not hydrolyse
16bKsp rises with T, so dissolution absorbs heat
17dΔn_g = 0 for HI, so its Kc has no units
18clog K = 17.1/5.71 = 3
19aΔn_g = 0, so pressure has no effect and Kp = Kc
20bα = √(10⁻⁵/0.10) = 0.010
21dOne pH unit is a 10-fold change
22cpOH = 9.4, [OH⁻] = 10⁻⁹·⁴ = 4.0 × 10⁻¹⁰ M
23apOH = 4.74 + log(0.10/0.20) = 4.44; pH 9.56
24aComplex formation pulls AgCl into solution
25bOnly HCl helps (removes C₂O₄²⁻); common ions lower solubility; extra solid changes nothing
26dExothermic K falls; endothermic K rises; vapour pressure and Kw rise with T
27cK₁K₂ = 0.040; reverse and halve: 1/√0.040 = 5.0
28b4α²/(1 − α²) = 1.33 gives α = 0.50
29d0.050 M CH₃COONa; pH = 7 + ½(4.74 + log 0.050) = 8.72
30a[OH⁻]³ = 10⁻³⁵, pOH = 11.67, pH = 2.33
13 min left
‹
›