Chapter 7: Common Ion Effect, Salt Hydrolysis and Buffers
What you will learn
The common ion effect and how it suppresses the ionisation of a weak electrolyte.
Why solutions of some salts are acidic or basic, and how to find their pH.
What a buffer is, how it works, and the Henderson–Hasselbalch equation.
How pH changes during acid–base titrations and how to choose an indicator.
7.1 Common ion effect
Add sodium acetate to acetic acid. Acetate is now coming from two places: the salt (fully dissociated) and the acid. By Le Chatelier's principle, extra CH₃COO⁻ pushes the acid's equilibrium back.
The common ion effect is the suppression of a weak electrolyte's ionisation by adding a strong electrolyte that shares an ion with it.
For a weak acid of concentration C mixed with its salt of concentration Cs (Cs much larger than the acid's own ionisation):
The same idea works for bases. Adding NH₄Cl to aqueous NH₃ lowers [OH⁻]. In qualitative analysis, NH₄Cl is added to NH₄OH in Group III so that [OH⁻] is just enough to precipitate Fe(OH)₃ and Al(OH)₃, but not the hydroxides of Group IV and V metals. Common ions also lower the solubility of salts (Chapter 8).
7.2 Salt hydrolysis
A salt's ions can react with water. The cation of a weak base takes OH⁻ from water and releases H⁺. The anion of a weak acid takes H⁺ from water and releases OH⁻. This reaction is salt hydrolysis. Ions from strong acids or strong bases (Na⁺, K⁺, Cl⁻, NO₃⁻, SO₄²⁻) do not hydrolyse.
| Salt made from | Example | Ion that hydrolyses | Solution | Hydrolysis constant Kh | pH |
|---|---|---|---|---|---|
| Strong acid + strong base | NaCl, KNO₃ | None | Neutral | – | 7 |
| Weak acid + strong base | CH₃COONa, Na₂CO₃, KCN | Anion | Basic | Kw/Ka | 7 + ½(pKa + log C) |
| Strong acid + weak base | NH₄Cl, CuSO₄, FeCl₃ | Cation | Acidic | Kw/Kb | 7 − ½(pKb + log C) |
| Weak acid + weak base | CH₃COONH₄ | Both | Depends on Ka vs Kb | Kw/(KaKb) | 7 + ½(pKa − pKb) |
Deriving the weak acid + strong base case. Take sodium acetate of concentration C, with degree of hydrolysis h.
Then [OH⁻] = Ch = √(KwC/Ka). Taking −log and using pH = 14 − pOH:
For NH₄Cl the steps are the same with Kb, and [H⁺] = √(KwC/Kb):
For CH₃COONH₄ both ions hydrolyse. The concentration cancels out, so h and pH do not depend on C:
Acetic acid and ammonia have the same pKa and pKb (4.74), so ammonium acetate solution is neutral.
7.3 Buffer solutions
A buffer is a solution whose pH changes very little when a small amount of acid or base is added, or when it is diluted. Our blood is a buffer: its pH stays near 7.4 even after a plate of spicy pickle or a hard cricket session that pumps lactic acid into the muscles.
| Type | Made of | Example | Typical pH |
|---|---|---|---|
| Acidic buffer | Weak acid + its salt with a strong base | CH₃COOH + CH₃COONa | About 4.74 at equal amounts |
| Basic buffer | Weak base + its salt with a strong acid | NH₃ (NH₄OH) + NH₄Cl | About 9.26 at equal amounts |
| Blood | Weak acid + its conjugate base | H₂CO₃ + HCO₃⁻ | About 7.4 |
| Phosphate | Two salts of a polyprotic acid | NaH₂PO₄ + Na₂HPO₄ | About 7.2 |
How an acidic buffer works. The buffer holds a large reserve of both CH₃COOH and CH₃COO⁻.
Add H⁺: acetate mops it up. CH₃COO⁻ + H⁺ → CH₃COOH.
Add OH⁻: acetic acid neutralises it. CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O.
Either way, a strong acid or base is swapped for a weak one. The ratio [salt]/[acid] shifts only a little, so the pH shifts only a little.

Added H⁺ is taken up by the acetate reserve and added OH⁻ by the acetic acid reserve, so only the ratio [salt]/[acid] shifts a little and the pH barely moves.
7.4 Henderson–Hasselbalch equation
Start from Ka for the acid and take −log:
For a basic buffer:
Here [salt] means [A⁻] (or [BH⁺]). Because only the ratio appears, you may use moles instead of concentrations; both are in the same volume.
Key results
When [salt] = [acid], pH = pKa. This is the half-neutralisation point of a titration.
Buffer capacity is greatest at this 1 : 1 ratio.
A buffer works well only within about pKa ± 1 (ratio between 1 : 10 and 10 : 1).
To make a buffer of a given pH, choose an acid with pKa close to that pH.
Moderate dilution does not change the ratio, so it does not change the pH.
A buffer can also be made by partly neutralising a weak acid with a strong base. For example, 2 mol CH₃COOH and 1 mol NaOH give 1 mol CH₃COOH and 1 mol CH₃COONa.
7.5 Titration curves and indicators
As base is added to an acid, pH rises slowly at first and then jumps sharply near the equivalence point. The shape tells you which indicator to use.

For HCl the jump spans both indicator bands, so either indicator works; for acetic acid the jump starts near pH 7 and only phenolphthalein falls inside it.
| Titration | pH at equivalence | Steep part (approximate) | Suitable indicators |
|---|---|---|---|
| Strong acid vs strong base (HCl vs NaOH) | 7 | About 3.5 to 10.5 | Phenolphthalein or methyl orange |
| Weak acid vs strong base (CH₃COOH vs NaOH) | Above 7 (salt is basic) | About 7 to 10.5 | Phenolphthalein (8.3 to 10) |
| Strong acid vs weak base (HCl vs NH₃) | Below 7 (salt is acidic) | About 3.5 to 7 | Methyl orange (3.1 to 4.4) |
| Weak acid vs weak base | Near 7, no sharp jump | Very small | None suitable |
An acid–base indicator is itself a weak acid (HIn) whose two forms have different colours. It changes colour over about pKIn ± 1. Choose one whose colour change falls inside the steep part of the curve.
7.6 Worked examples
Worked example 7.1: Find the pH and the degree of ionisation of acetic acid in a solution that is 0.10 M in CH₃COOH and 0.10 M in CH₃COONa (Ka = 1.8 × 10⁻⁵).
Solution: [H⁺] = Ka × (0.10/0.10) = 1.8 × 10⁻⁵ M, so pH = 4.74. α = 1.8 × 10⁻⁵/0.10 = 1.8 × 10⁻⁴. Without the salt, α was 1.34 × 10⁻² (Chapter 5). The common ion has cut it about 75 times.
Worked example 7.2: Find the pH and degree of hydrolysis of 0.10 M CH₃COONa (pKa = 4.74).
Solution:
Worked example 7.3: Find the pH of 0.10 M NH₄Cl (pKb of NH₃ = 4.74).
Solution: pH = 7 − 2.37 − ½(−1) = 7 − 2.37 + 0.50 = 5.13.
Worked example 7.4: Find the pH of 0.10 M ammonium formate. pKa of HCOOH = 3.74 and pKb of NH₃ = 4.74.
Solution: pH = 7 + ½(3.74 − 4.74) = 7 − 0.50 = 6.50. The concentration is not needed.
Worked example 7.5: Find the pH of a buffer that is 0.20 M in CH₃COOH and 0.10 M in CH₃COONa.
Solution: pH = 4.74 + log(0.10/0.20) = 4.74 − 0.30 = 4.44.
Worked example 7.6: Find the pH of a solution that is 0.10 M in NH₃ and 0.20 M in NH₄Cl (pKb = 4.74).
Solution: pOH = 4.74 + log(0.20/0.10) = 4.74 + 0.30 = 5.04. pH = 14 − 5.04 = 8.96.
Worked example 7.7: 1.0 L of buffer contains 0.10 mol each of CH₃COOH and CH₃COONa. Find the pH after adding 0.010 mol HCl. Compare with adding the same HCl to 1.0 L of pure water.
Solution: H⁺ converts acetate to acetic acid. Salt = 0.10 − 0.010 = 0.090 mol. Acid = 0.10 + 0.010 = 0.11 mol.
The buffer's pH fell by only 0.09. In pure water, 0.010 M HCl would take the pH from 7 to 2, a fall of 5 units.
Worked example 7.8: 50 mL of 0.20 M CH₃COOH is mixed with 50 mL of 0.10 M NaOH. Find the pH.
Solution: Acid = 10 mmol, NaOH = 5 mmol. After reaction: 5 mmol CH₃COOH and 5 mmol CH₃COO⁻. Ratio = 1, so pH = pKa = 4.74. This is a buffer at its best capacity.
Worked example 7.9: 25 mL of 0.10 M CH₃COOH is titrated with 0.10 M NaOH. Find the pH (a) after 12.5 mL of base, and (b) at the equivalence point.
Solution: (a) Half the acid is neutralised, so [salt] = [acid] and pH = pKa = 4.74.
(b) At 25 mL, all 2.5 mmol acid becomes acetate in 50 mL, so C = 0.050 M.
The equivalence point lies above 7, so phenolphthalein is the right indicator.
Quick revision
Common ion suppresses ionisation: [H⁺] = Ka × C(acid)/C(salt).
Salt of weak acid + strong base: basic, pH = 7 + ½pKa + ½log C.
Salt of strong acid + weak base: acidic, pH = 7 − ½pKb − ½log C.
Salt of weak acid + weak base: pH = 7 + ½(pKa − pKb), independent of C.
Kh = Kw/Ka, Kw/Kb or Kw/(KaKb).
Henderson: pH = pKa + log([salt]/[acid]); pOH = pKb + log([salt]/[base]).
Best buffer at pH = pKa; useful range pKa ± 1.
Weak acid vs strong base: phenolphthalein. Strong acid vs weak base: methyl orange.
NEET traps
Treating NaCl or KNO₃ as hydrolysing. Ions of strong acids and bases do not hydrolyse.
Using the plain weak-acid formula for a buffer. Use Henderson.
Forgetting the total volume when finding the salt concentration at equivalence.
Thinking a buffer's pH changes on moderate dilution. The ratio stays the same.
Writing the half-neutralisation pH as 7. It equals pKa.
Using methyl orange for acetic acid vs NaOH. It changes colour too early.
Practice MCQs: Chapter 7
Level 1: Concept check
1. Adding sodium acetate to a solution of acetic acid (a) suppresses the ionisation of acetic acid (b) increases [H⁺] (c) increases the ionisation of acetic acid (d) has no effect
2. An aqueous solution of CH₃COONa is (a) neutral (b) acidic (c) basic (d) amphoteric
3. An aqueous solution of NH₄Cl is (a) basic (b) acidic (c) neutral (d) strongly basic
4. The pH of aqueous NaCl at 298 K is (a) 5 (b) 9 (c) 1 (d) 7
5. The Henderson equation for an acidic buffer is (a) pH = pKa + log([salt]/[acid]) (b) pH = pKa − log([salt]/[acid]) (c) pH = pKb + log([salt]/[acid]) (d) pH = Ka × [salt]/[acid]
6. Which mixture is a buffer? (a) HCl + NaCl (b) NaOH + NaCl (c) CH₃COOH + CH₃COONa (d) HNO₃ + KNO₃
7. A buffer has its greatest capacity when (a) [salt] is 10 times [acid] (b) pH = 7 (c) only acid is present (d) pH = pKa
8. The best indicator for titrating CH₃COOH with NaOH is (a) methyl orange (b) phenolphthalein (c) methyl red only (d) no indicator works
9. The main buffer system of blood is (a) H₂CO₃/HCO₃⁻ (b) CH₃COOH/CH₃COO⁻ (c) NH₃/NH₄⁺ (d) HCl/Cl⁻
10. For a salt of a weak acid and a strong base, Kh equals (a) Kw × Ka (b) Ka/Kw (c) Kw/Kb (d) Kw/Ka
Level 2: NEET standard
11. A solution is 0.10 M in CH₃COOH and 0.10 M in CH₃COONa (pKa = 4.74). Its pH is (a) 2.87 (b) 4.74 (c) 7.00 (d) 9.26
12. The pH of 0.10 M CH₃COONa (pKa = 4.74) is about (a) 7.00 (b) 9.26 (c) 8.87 (d) 5.13
13. The pH of 0.10 M NH₄Cl (pKb of NH₃ = 4.74) is about (a) 5.13 (b) 4.74 (c) 8.87 (d) 2.87
14. The pH of aqueous CH₃COONH₄ (pKa = pKb = 4.74) is (a) 4.74 (b) 9.26 (c) depends on concentration (d) 7.00
15. A buffer contains 0.20 M CH₃COOH and 0.10 M CH₃COONa (pKa = 4.74). Its pH is (a) 5.04 (b) 4.44 (c) 4.74 (d) 4.14
16. A solution is 0.10 M in NH₃ and 0.20 M in NH₄Cl (pKb = 4.74). Its pH is about (a) 9.56 (b) 5.04 (c) 8.96 (d) 9.26
17. For an acid with pKa = 4.74, the ratio [salt]/[acid] needed for a buffer of pH 5.74 is (a) 10 (b) 1 (c) 0.1 (d) 2
18. The degree of hydrolysis of 0.10 M CH₃COONa (Ka = 1.8 × 10⁻⁵) is about (a) 1.3 × 10⁻² (b) 5.6 × 10⁻¹⁰ (c) 7.5 × 10⁻³ (d) 7.5 × 10⁻⁵
19. Which salt gives an acidic solution in water? (a) Na₂CO₃ (b) KCl (c) CuSO₄ (d) CH₃COOK
20. In a solution 0.10 M in both NH₃ and NH₄Cl (Kb = 1.8 × 10⁻⁵), [OH⁻] is (a) 1.3 × 10⁻³ M (b) 1.8 × 10⁻⁵ M (c) 0.10 M (d) 5.6 × 10⁻¹⁰ M
21. 50 mL of 0.20 M CH₃COOH is mixed with 50 mL of 0.10 M NaOH (pKa = 4.74). The pH is (a) 4.74 (b) 7.00 (c) 2.87 (d) 8.87
22. When CH₃COOH is titrated with NaOH, the pH at the equivalence point is (a) exactly 7 (b) below 7 (c) equal to pKa (d) above 7
Level 3: Challenge
23. 0.010 mol HCl is added to 1.0 L of a buffer containing 0.10 mol each of CH₃COOH and CH₃COONa (pKa = 4.74). The new pH is about (a) 2.00 (b) 4.74 (c) 4.65 (d) 4.83
24. The pH of aqueous ammonium formate (pKa of HCOOH = 3.74, pKb of NH₃ = 4.74) is about (a) 7.0 (b) 6.5 (c) 7.5 (d) 3.7
25. 25 mL of 0.10 M CH₃COOH (pKa = 4.74) is titrated with 0.10 M NaOH. The pH at the equivalence point is about (a) 7.00 (b) 4.74 (c) 8.87 (d) 8.72
26. The degree of hydrolysis of CH₃COONH₄ in water (a) does not depend on its concentration (b) is proportional to its concentration (c) is proportional to √C (d) is zero
27. Methyl orange is not used for titrating CH₃COOH with NaOH because (a) it is a strong acid (b) it reacts with acetate (c) its colour change (pH 3.1 to 4.4) comes well before the equivalence point (d) the equivalence point is below 7
28. The pH of 0.010 M NaCN (Ka of HCN = 4.9 × 10⁻¹⁰) is about (a) 9.31 (b) 10.65 (c) 12.00 (d) 7.00
29. Assertion (A): A buffer of CH₃COOH and CH₃COONa resists a change in pH when a little NaOH is added. Reason (R): The added OH⁻ is removed by CH₃COO⁻ ions. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: An aqueous solution of NH₄Cl is basic. Statement II: NH₄⁺ ions react with water to give H₃O⁺. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | Common ion pushes equilibrium back |
| 2 | c | Acetate hydrolyses to give OH⁻ |
| 3 | b | NH₄⁺ hydrolyses to give H⁺ |
| 4 | d | No hydrolysis |
| 5 | a | From Ka, taking −log |
| 6 | c | Weak acid + its salt |
| 7 | d | Ratio 1 : 1 |
| 8 | b | Equivalence pH about 8.7 |
| 9 | a | Carbonic acid–bicarbonate |
| 10 | d | Anion hydrolysis |
| 11 | b | Ratio 1, pH = pKa |
| 12 | c | 7 + 2.37 − 0.50 |
| 13 | a | 7 − 2.37 + 0.50 |
| 14 | d | 7 + ½(4.74 − 4.74) |
| 15 | b | 4.74 + log 0.5 |
| 16 | c | pOH = 5.04 |
| 17 | a | log ratio = 1 |
| 18 | d | √(5.6 × 10⁻¹⁰/0.10) |
| 19 | c | Cu²⁺ from weak base hydrolyses |
| 20 | b | [OH⁻] = Kb at ratio 1 |
| 21 | a | 5 mmol acid, 5 mmol salt |
| 22 | d | Acetate is basic |
| 23 | c | 4.74 + log(0.090/0.11) |
| 24 | b | 7 + ½(3.74 − 4.74) |
| 25 | d | C(salt) = 0.050 M after dilution |
| 26 | a | h = √(Kw/KaKb) |
| 27 | c | Changes colour too early |
| 28 | b | pKa 9.31; 7 + 4.655 − 1 |
| 29 | c | OH⁻ is removed by CH₃COOH, not acetate |
| 30 | d | NH₄Cl solution is acidic |
Chapter 7 revision sheet
One-page summary
Common ion effect: adding an ion already present in an equilibrium pushes it back and lowers ionisation.
CH₃COONa lowers the ionisation of CH₃COOH; NH₄Cl lowers the ionisation of NH₄OH.
Group III analysis uses NH₄Cl with NH₄OH so only Fe(OH)₃ and Al(OH)₃ (with Cr(OH)₃) precipitate.
Salt hydrolysis: the ion of a weak acid or weak base reacts with water and changes the pH.
Strong acid + strong base salt (NaCl): no hydrolysis, pH 7.
Weak acid + strong base salt (CH₃COONa): basic. pH = 7 + ½(pKa + log C).
Strong acid + weak base salt (NH₄Cl): acidic. pH = 7 − ½(pKb + log C).
Weak acid + weak base salt (CH₃COONH₄): pH = 7 + ½(pKa − pKb), independent of concentration.
Hydrolysis constant Kh = Kw/Ka (or Kw/Kb); degree of hydrolysis h = √(Kh/C) rises on dilution.
A buffer resists pH change on adding a little acid or base, or on dilution.
Acidic buffer: pH = pKa + log([salt]/[acid]). Basic buffer: pOH = pKb + log([salt]/[base]).
Buffer capacity is greatest when [salt] = [acid], where pH = pKa. Useful range is pKa ± 1.
Half-neutralising a weak acid with NaOH makes a buffer with pH = pKa.
Must-remember table
| Salt or system | Nature | pH formula (298 K) |
|---|---|---|
| NaCl, KNO₃ | Neutral | 7 |
| CH₃COONa, Na₂CO₃ | Basic | 7 + ½(pKa + log C) |
| NH₄Cl, CuSO₄ | Acidic | 7 − ½(pKb + log C) |
| CH₃COONH₄ | Near neutral | 7 + ½(pKa − pKb) |
| CH₃COOH + CH₃COONa | Acidic buffer | pKa + log([salt]/[acid]) |
| NH₄OH + NH₄Cl | Basic buffer | 14 − pKb − log([salt]/[base]) |
| Blood | H₂CO₃/HCO₃⁻ buffer | about 7.4 |
Memory aids
"Strong parent wins": the salt's solution takes the nature of the stronger parent (strong acid parent → acidic; strong base parent → basic).
"Equal means pKa": equal moles of acid and salt give pH = pKa.
"Salt on Top" (Henderson): log(salt/acid) — salt in the numerator.
"Two weak, no C": for a salt of weak acid and weak base, concentration drops out of the pH formula.
Concept connections
The blood buffer and pH regulation connect to Biology Book 5: Human Physiology (gas transport and kidney function).
Group analysis using common ion effect is part of Chemistry Book 20: Principles Related to Practical Chemistry.
Hydrolysis of salts like Na₂CO₃ and AlCl₃ links to Chemistry Book 10: p-Block Elements.
Practice MCQs: Chapter 7, Level 4 (new NEET pattern)
31. Match List I (salt, 0.1 M) with List II (nature of solution).
| List I | List II |
|---|---|
| A. NaCl | i. Acidic |
| B. CH₃COONa | ii. pH 7; no hydrolysis |
| C. NH₄Cl | iii. About 7; both ions hydrolyse |
| D. CH₃COONH₄ | iv. Basic |
(a) A-ii, B-i, C-iv, D-iii (b) A-iii, B-iv, C-i, D-ii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-iv, C-i, D-iii
32. Match List I (system) with List II (pH expression at 298 K).
| List I | List II |
|---|---|
| A. Salt of weak acid and strong base | i. pKa + log([salt]/[acid]) |
| B. Salt of strong acid and weak base | ii. 7 + ½(pKa − pKb) |
| C. Salt of weak acid and weak base | iii. 7 + ½(pKa + log C) |
| D. Acidic buffer | iv. 7 − ½(pKb + log C) |
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-iv, C-ii, D-iii
33. Match List I (type) with List II (example).
| List I | List II |
|---|---|
| A. Acidic buffer | i. H₂CO₃ + HCO₃⁻ |
| B. Basic buffer | ii. HCl + NaCl |
| C. Main buffer of blood | iii. NH₄OH + NH₄Cl |
| D. Not a buffer | iv. CH₃COOH + CH₃COONa |
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-iii, C-ii, D-i
34. Match List I (process) with List II (reagent or condition).
| List I | List II |
|---|---|
| A. Precipitation of Group II sulphides | i. HCl gas through saturated brine |
| B. Precipitation of Group III hydroxides | ii. H₂S with dilute HCl |
| C. Precipitation of Group IV sulphides | iii. H₂S in ammoniacal solution |
| D. Purification of common salt | iv. NH₄OH with NH₄Cl |
(a) A-ii, B-iv, C-iii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-i, B-iv, C-iii, D-ii
35. How many of the following statements are correct?
A. Adding CH₃COONa to CH₃COOH solution raises the pH.
B. Buffer capacity is greatest when [salt] = [acid].
C. Diluting a buffer changes its pH a lot.
D. A salt of a strong acid and a strong base does not hydrolyse.
E. The pH of CH₃COONH₄ solution depends strongly on its concentration.
(a) Two (b) Four (c) Three (d) Five
36. For hydrolysis of CH₃COONa in water, choose the correct set.
A. Kh = Kw/Ka
B. Degree of hydrolysis h = √(Kh/C)
C. The solution is acidic.
D. h increases on dilution.
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D
37. Which of these mixtures act as buffers?
A. 50 mL 0.1 M CH₃COOH + 25 mL 0.1 M NaOH
B. 50 mL 0.1 M NH₄OH + 25 mL 0.1 M HCl
C. 50 mL 0.1 M HCl + 50 mL 0.1 M NaOH
D. 50 mL 0.1 M CH₃COOH + 50 mL 0.1 M NaOH
(a) A, B and D only (b) C and D only (c) A only (d) A and B only
38. How many of the following are examples of the common ion effect?
A. NH₄Cl lowering the ionisation of NH₄OH
B. AgCl being less soluble in NaCl solution than in water
C. Pure NaCl crystallising when HCl gas is passed through its saturated solution
D. Mg(OH)₂ dissolving in dilute HCl
E. HCl suppressing the ionisation of H₂S
F. NaCl dissolving in water
(a) Three (b) Four (c) Five (d) Two
39. A titration curve shows the pH of 20 mL of 0.10 M CH₃COOH as 0.10 M NaOH is added. The pH is 4.74 when 10 mL of NaOH has been added. The curve rises steeply near 20 mL and passes through about pH 8.7 at the equivalence point. Which is correct?
(a) pKa = 4.74 and the equivalence point is at pH 7 (b) pKa = 9.26 and the equivalence point is above 7 (c) pKa = 4.74 and the equivalence point is above 7 (d) pKa = 2.37 and the equivalence point is below 7
40. For an acetic acid–acetate buffer (pKa = 4.74), the table gives pH at different ratios.
| [salt]/[acid] | 0.10 | 1.0 | 10 |
|---|---|---|---|
| pH | 3.74 | 4.74 | 5.74 |
The ratio needed for pH 5.04 is about (log 2 = 0.30):
(a) 2.0 (b) 0.50 (c) 3.0 (d) 1.3
41. 0.10 M solutions of three sodium salts have the following pH at 298 K.
| Salt | NaX | NaY | NaZ |
|---|---|---|---|
| pH | 8.9 | 9.4 | 7.0 |
The order of acid strength of the parent acids is:
(a) HY > HX > HZ (b) HX > HY > HZ (c) HZ > HY > HX (d) HZ > HX > HY
Passage for Q42–Q43: A pharmacy lab makes 1.0 L of buffer containing 0.10 mol CH₃COOH and 0.10 mol CH₃COONa (pKa = 4.74). To test it, 0.010 mol HCl is added to this buffer. The same amount of HCl is also added to 1.0 L of pure water. Ignore volume changes.
42. The pH of the buffer after adding HCl is about:
(a) 4.74 (b) 4.65 (c) 4.83 (d) 3.74
43. The pH of the water after adding HCl is:
(a) 7.0 (b) 4.0 (c) 2.0 (d) 1.0
44. The pH of 0.10 M NH₄Cl at 298 K (pKb of NH₃ = 4.74) is about:
(a) 5.13 (b) 8.87 (c) 4.74 (d) 6.13
45. 100 mL of 0.20 M NH₃ is mixed with 50 mL of 0.20 M HCl at 298 K (pKb of NH₃ = 4.74). The pH of the mixture is about:
(a) 4.74 (b) 7.00 (c) 5.13 (d) 9.26
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Strong–strong neutral; weak acid salt basic; weak base salt acidic; Ka ≈ Kb gives about 7 |
| 32 | b | Standard hydrolysis and Henderson expressions |
| 33 | c | HCl + NaCl has no weak acid, so it is not a buffer |
| 34 | a | Low [S²⁻] in acid; low [OH⁻] with NH₄Cl; high [S²⁻] in base; Cl⁻ common ion |
| 35 | c | A, B, D true; buffer pH barely changes on dilution; CH₃COONH₄ pH is independent of C |
| 36 | a | Acetate hydrolysis makes the solution basic |
| 37 | d | A and B are half-neutralised weak acid/base; C and D have no weak partner left |
| 38 | b | A, B, C, E; D is neutralisation, F is ordinary dissolution |
| 39 | c | Half-equivalence pH = pKa; acetate makes the end point basic |
| 40 | a | log ratio = 0.30, ratio = 2.0 |
| 41 | d | More basic salt solution means weaker parent acid; NaZ neutral means HZ strong |
| 42 | b | pH = 4.74 + log(0.09/0.11) = 4.65 |
| 43 | c | [H⁺] = 0.010 M, pH 2.0 |
| 44 | a | pH = 7 − ½(4.74 + log 0.10) = 5.13 |
| 45 | d | 10 mmol NH₃ left, 10 mmol NH₄⁺ formed; pOH = pKb, pH = 9.26 |