Chapter 10 of 12 · 22 min read

Chapter 8: Solubility Product

What you will learn

  • What a sparingly soluble salt is and how its saturated solution is an equilibrium.

  • The solubility product Ksp and how to write it for any salt.

  • How to convert between Ksp and molar solubility s for AB, AB₂, A₂B, AB₃ and A₂B₃ salts.

  • The precipitation rule: compare the ionic product Q with Ksp.

  • How a common ion lowers solubility, and how this is used in salt purification and qualitative analysis.

8.1 Sparingly soluble salts

Salts dissolve to very different extents. Roughly, a salt is called:

CategorySolubility in water at 298 K (approximate)Examples
SolubleMore than 0.1 MNaCl, KNO₃, AgNO₃
Slightly soluble0.01 M to 0.1 MCaSO₄ (borderline)
Sparingly solubleLess than 0.01 MAgCl, BaSO₄, CaF₂, PbI₂, Fe(OH)₃

Whether a salt dissolves depends on a contest. The lattice enthalpy holds the ions together. The hydration enthalpy pulls them into water. Dissolving also raises entropy. When hydration cannot beat the lattice, solubility is low.

8.2 The solubility product, Ksp

Shake solid BaSO₄ with water. A tiny amount dissolves, and the dissolved part is fully ionised. A saturated solution with undissolved solid is a dynamic, heterogeneous equilibrium:

BaSO4(s)⇌Ba2+(aq)+SO42−(aq)\mathrm{BaSO_4(s) \rightleftharpoons Ba^{2+}(aq) + SO_4^{2-}(aq)}

The solid is left out of the expression, as in Chapter 2:

Ksp=[Ba2+][SO42−]K_{sp} = [Ba^{2+}][SO_4^{2-}]

For a general salt M_xA_y:

MxAy(s)⇌xMy+(aq)+yAx−(aq)Ksp=[My+]x[Ax−]y\mathrm{M_xA_y(s) \rightleftharpoons xM^{y+}(aq) + yA^{x-}(aq)} \qquad K_{sp} = [M^{y+}]^x[A^{x-}]^y

Ksp is the product of the ion concentrations in a saturated solution, each raised to its coefficient. Like any K, it depends only on temperature.

8.3 Ksp and molar solubility s

Let s be the molar solubility (mol of salt dissolving per litre). Each formula unit M_xA_y gives x cations and y anions, so [M] = xs and [A] = ys.

Ksp=(xs)x(ys)y=xxyysx+yK_{sp} = (xs)^x (ys)^y = x^x y^y s^{x+y}
TypeExampleIon concentrationsKsp in terms of ss in terms of Ksp
ABAgCl, BaSO₄s, ss²√Ksp
AB₂ or A₂BCaF₂, PbI₂, Mg(OH)₂, Ag₂CrO₄s, 2s4s³(Ksp/4)^(1/3)
AB₃ or A₃BFe(OH)₃, Al(OH)₃, Ag₃PO₄s, 3s27s⁴(Ksp/27)^(1/4)
A₂B₃Bi₂S₃, As₂S₃2s, 3s108s⁵(Ksp/108)^(1/5)
A₃B₂Ca₃(PO₄)₂3s, 2s108s⁵(Ksp/108)^(1/5)

Derivation for A₂B₃: [A] = 2s and [B] = 3s, so Ksp = (2s)²(3s)³ = 4s² × 27s³ = 108s⁵.

To get solubility in g L⁻¹, multiply s by the molar mass.

Comparing solubilities. A smaller Ksp means lower solubility only for salts of the same type. AgCl (AB, Ksp = 1.8 × 10⁻¹⁰) and Ag₂CrO₄ (A₂B, Ksp = 1.1 × 10⁻¹²) are a favourite trap. Ag₂CrO₄ has the smaller Ksp but the larger molar solubility (6.5 × 10⁻⁵ M against 1.3 × 10⁻⁵ M). Always convert to s before comparing.

8.4 Will a precipitate form? Q vs Ksp

The ionic product Q has the same form as Ksp, but uses the ion concentrations at any moment (just after mixing, for example).

ComparisonState of solutionWhat happens
Q less than KspUnsaturatedMore solid can dissolve; no precipitate
Q = KspSaturatedEquilibrium
Q greater than KspSupersaturatedPrecipitate forms until Q falls to Ksp

When two solutions are mixed, first find each ion's concentration after mixing (dilution by the total volume). Then compute Q.

Selective precipitation. If a solution holds two anions that both form insoluble salts with the same cation, the salt whose Ksp is reached first precipitates first. This needs a calculation of the cation concentration each salt requires, not a quick glance at Ksp.

8.5 Common ion effect on solubility

Add NaCl to a saturated solution of AgCl. [Cl⁻] rises, so Q exceeds Ksp and some AgCl comes out. The solubility of AgCl in NaCl solution is lower than in pure water.

If AgCl dissolves to s in c M NaCl, then [Ag⁺] = s and [Cl⁻] = c + s ≈ c (because s is tiny):

Ksp=s(c+s)≈s c  ⇒  s=KspcK_{sp} = s(c + s) \approx s\,c \;\Rightarrow\; s = \frac{K_{sp}}{c}

For an AB₂ salt such as CaF₂ in c M NaF: Ksp = s(c + 2s)² ≈ s c², so s = Ksp/c². Note that the common ion's own concentration is squared.

Uses of the common ion effect

  • Purifying common salt. Pass HCl gas into a saturated solution of crude NaCl. The high [Cl⁻] pushes the ionic product of NaCl above its solubility limit. Pure NaCl crystallises out; the soluble impurities stay in solution.

  • Qualitative analysis, Group II. H₂S is passed in the presence of dilute HCl. The H⁺ suppresses ionisation of H₂S (Chapter 5), keeping [S²⁻] very low. Only sulphides with very small Ksp (CuS, PbS, CdS) precipitate. Group IV sulphides (ZnS, NiS, CoS), with larger Ksp, precipitate later in basic medium, where [S²⁻] is higher.

  • Qualitative analysis, Group III. NH₄Cl lowers [OH⁻] from NH₄OH, so only the very insoluble Fe(OH)₃ and Al(OH)₃ come down.

Effect of pH. Salts of weak acids (carbonates, phosphates, sulphides, hydroxides) dissolve better in acid, because H⁺ removes the anion as the weak acid. That is why CaCO₃ in limestone dissolves in acid rain, and why tooth enamel (a calcium phosphate) suffers when mouth bacteria produce acid.

8.6 Worked examples

Worked example 8.1: Ksp of AgCl at 298 K is 1.8 × 10⁻¹⁰. Find its solubility in mol L⁻¹ and g L⁻¹ (molar mass 143.5 g mol⁻¹).

Solution: s = √(1.8 × 10⁻¹⁰) = 1.34 × 10⁻⁵ M. In grams: 1.34 × 10⁻⁵ × 143.5 = 1.9 × 10⁻³ g L⁻¹.

Worked example 8.2: The molar solubility of CaF₂ is 2.0 × 10⁻⁴ M. Find Ksp.

Solution: [Ca²⁺] = 2.0 × 10⁻⁴ M and [F⁻] = 4.0 × 10⁻⁴ M.

Ksp=(2.0×10−4)(4.0×10−4)2=4s3=3.2×10−11K_{sp} = (2.0 \times 10^{-4})(4.0 \times 10^{-4})^2 = 4s^3 = 3.2 \times 10^{-11}

Worked example 8.3: Ksp of Ag₂CrO₄ is 1.1 × 10⁻¹². Find its molar solubility and compare with AgCl.

Solution:

s=(1.1×10−124)1/3=(2.75×10−13)1/3=6.5×10−5 Ms = \left(\frac{1.1 \times 10^{-12}}{4}\right)^{1/3} = (2.75 \times 10^{-13})^{1/3} = 6.5 \times 10^{-5}\ \text{M}

This is about 5 times the molar solubility of AgCl, even though its Ksp is smaller.

Worked example 8.4: A salt A₂B₃ has a molar solubility of 1.0 × 10⁻⁴ M. Find its Ksp.

Solution: Ksp = 108s⁵ = 108 × (10⁻⁴)⁵ = 108 × 10⁻²⁰ = 1.08 × 10⁻¹⁸.

Worked example 8.5: Equal volumes of 2.0 × 10⁻⁴ M AgNO₃ and 2.0 × 10⁻⁴ M NaCl are mixed. Will AgCl precipitate? (Ksp = 1.8 × 10⁻¹⁰)

Solution: After mixing, each concentration halves: [Ag⁺] = [Cl⁻] = 1.0 × 10⁻⁴ M. Q = 1.0 × 10⁻⁸. Q is greater than Ksp, so AgCl precipitates.

Worked example 8.6: Find the solubility of AgCl in 0.10 M NaCl, and compare it with that in water.

Solution: s = Ksp/c = 1.8 × 10⁻¹⁰/0.10 = 1.8 × 10⁻⁹ M. In water s = 1.34 × 10⁻⁵ M, so the common ion has cut solubility about 7500 times.

Worked example 8.7: Ksp of Mg(OH)₂ is 1.2 × 10⁻¹¹. Find (a) the pH of its saturated solution, and (b) the minimum pH at which Mg(OH)₂ starts to precipitate from a solution with [Mg²⁺] = 0.010 M.

Solution: (a) s = (1.2 × 10⁻¹¹/4)^(1/3) = 1.44 × 10⁻⁴ M. [OH⁻] = 2s = 2.88 × 10⁻⁴ M, pOH = 3.54, pH = 10.46.

(b) Precipitation starts when [Mg²⁺][OH⁻]² = Ksp:

[OH−]=1.2×10−110.010=3.46×10−5 M  ⇒  pOH=4.46, pH=9.54[OH^-] = \sqrt{\frac{1.2 \times 10^{-11}}{0.010}} = 3.46 \times 10^{-5}\ \text{M} \;\Rightarrow\; \mathrm{pOH} = 4.46,\ \mathrm{pH} = 9.54

Worked example 8.8: A solution contains 0.010 M Cl⁻ and 0.010 M CrO₄²⁻. AgNO₃ is added slowly. Which precipitates first? (Ksp: AgCl 1.8 × 10⁻¹⁰, Ag₂CrO₄ 1.1 × 10⁻¹²)

Solution: For AgCl: [Ag⁺] needed = 1.8 × 10⁻¹⁰/0.010 = 1.8 × 10⁻⁸ M. For Ag₂CrO₄: [Ag⁺] needed = √(1.1 × 10⁻¹²/0.010) = 1.05 × 10⁻⁵ M. AgCl needs far less Ag⁺, so white AgCl precipitates first. Red Ag₂CrO₄ appears only after almost all Cl⁻ is gone. This is the basis of the Mohr titration.

Worked example 8.9: The solubility of PbI₂ (molar mass 461 g mol⁻¹) is 0.70 g L⁻¹ at a certain temperature. Find Ksp.

Solution: s = 0.70/461 = 1.52 × 10⁻³ M. Ksp = 4s³ = 4 × (1.52 × 10⁻³)³ = 1.4 × 10⁻⁸.

Quick revision

  • Ksp = product of ion concentrations in a saturated solution, each raised to its coefficient.

  • Ksp = xˣyʸ s^(x+y): AB s², AB₂ 4s³, AB₃ 27s⁴, A₂B₃ 108s⁵.

  • Compare solubilities through s, not Ksp, unless the salts are of the same type.

  • Q greater than Ksp: precipitate. Q less than Ksp: no precipitate.

  • After mixing, dilute each concentration before finding Q.

  • Common ion lowers solubility: AB in c M common ion, s = Ksp/c.

  • Ksp changes only with temperature; a common ion changes s, not Ksp.

NEET traps

  • Writing Ksp = s² for every salt. Use the correct type.

  • Forgetting to double [F⁻] or [OH⁻] before squaring for AB₂ salts.

  • Ranking AgCl and Ag₂CrO₄ by Ksp alone.

  • Using concentrations before mixing to find Q.

  • Saying Ksp decreases in the presence of a common ion. Only s decreases.

  • In AB₂ + common anion problems, forgetting to square the common ion: s = Ksp/c².

Practice MCQs: Chapter 8

Level 1: Concept check

1. The solubility product of AgCl is (a) [Ag⁺] + [Cl⁻] (b) [Ag⁺][Cl⁻] (c) [Ag⁺][Cl⁻]/[AgCl] (d) [Ag⁺]²[Cl⁻]

2. For a salt of type AB₂ with molar solubility s, Ksp is (a) s² (b) 2s² (c) 4s³ (d) 27s⁴

3. A precipitate forms when (a) ionic product is greater than Ksp (b) ionic product equals Ksp (c) ionic product is less than Ksp (d) Ksp is zero

4. Adding a common ion to a saturated solution of a sparingly soluble salt (a) increases its solubility (b) increases Ksp (c) has no effect (d) decreases its solubility

5. The value of Ksp of a salt depends on (a) the volume of water (b) temperature (c) the amount of solid present (d) the presence of a common ion

6. For a salt A₂B₃ with molar solubility s, Ksp is (a) 6s⁵ (b) 27s⁴ (c) 5s² (d) 108s⁵

7. In a saturated solution of a sparingly soluble salt, (a) ionic product = Ksp (b) ionic product is greater than Ksp (c) ionic product is less than Ksp (d) no ions are present

8. Ksp of Ag₂CrO₄ is (a) [Ag⁺][CrO₄²⁻] (b) 2[Ag⁺][CrO₄²⁻] (c) [Ag⁺]²[CrO₄²⁻] (d) [Ag⁺][CrO₄²⁻]²

9. For Al(OH)₃ with molar solubility s, Ksp is (a) 3s² (b) 27s⁴ (c) 4s³ (d) 9s⁴

10. Pure NaCl crystallises when HCl gas is passed into its saturated solution. This is due to (a) hydrolysis (b) a rise in temperature (c) the common ion effect (d) oxidation of Cl⁻

Level 2: NEET standard

11. Ksp of AgCl is 1.8 × 10⁻¹⁰. Its molar solubility is about (a) 1.3 × 10⁻⁵ M (b) 9.0 × 10⁻¹¹ M (c) 1.8 × 10⁻⁵ M (d) 4.2 × 10⁻⁴ M

12. The molar solubility of CaF₂ is 2.0 × 10⁻⁴ M. Its Ksp is (a) 4.0 × 10⁻⁸ (b) 8.0 × 10⁻¹² (c) 1.6 × 10⁻¹⁰ (d) 3.2 × 10⁻¹¹

13. Ksp of Ag₂CrO₄ is 1.1 × 10⁻¹². Its molar solubility is about (a) 1.0 × 10⁻⁶ M (b) 6.5 × 10⁻⁵ M (c) 1.0 × 10⁻⁴ M (d) 2.8 × 10⁻¹³ M

14. Equal volumes of 2.0 × 10⁻⁴ M AgNO₃ and 2.0 × 10⁻⁴ M NaCl are mixed (Ksp of AgCl = 1.8 × 10⁻¹⁰). Then (a) no precipitate forms, Q = 1.0 × 10⁻¹⁰ (b) the solution is just saturated (c) AgCl precipitates, Q = 1.0 × 10⁻⁸ (d) AgCl precipitates, Q = 4.0 × 10⁻⁸

15. The molar solubility of AgCl (Ksp = 1.8 × 10⁻¹⁰) in 0.10 M NaCl is (a) 1.8 × 10⁻⁹ M (b) 1.3 × 10⁻⁵ M (c) 1.8 × 10⁻¹¹ M (d) 1.3 × 10⁻⁶ M

16. Ksp of Mg(OH)₂ is 1.2 × 10⁻¹¹. The pH of its saturated solution is about (a) 3.54 (b) 9.54 (c) 7.00 (d) 10.46

17. Ksp values: AgCl 1.8 × 10⁻¹⁰, Ag₂CrO₄ 1.1 × 10⁻¹². Which statement is correct? (a) AgCl has the higher molar solubility (b) Ag₂CrO₄ has the higher molar solubility (c) both have equal molar solubility (d) they cannot be compared at all

18. Ksp of AgCl is 1.8 × 10⁻¹⁰ (molar mass 143.5 g mol⁻¹). Its solubility in g L⁻¹ is about (a) 1.3 × 10⁻⁵ (b) 2.6 × 10⁻⁸ (c) 1.9 × 10⁻³ (d) 0.19

19. A salt A₂B₃ has a molar solubility of 1.0 × 10⁻⁴ M. Its Ksp is (a) 1.08 × 10⁻¹⁸ (b) 1.0 × 10⁻²⁰ (c) 6.0 × 10⁻²⁰ (d) 2.7 × 10⁻¹⁵

20. Ksp of Mg(OH)₂ is 1.2 × 10⁻¹¹. In a solution with [Mg²⁺] = 0.010 M, precipitation begins at a pH of about (a) 4.46 (b) 10.46 (c) 8.00 (d) 9.54

21. Solid Na₂SO₄ is added to a saturated solution of BaSO₄ that has no solid at the bottom. What happens? (a) More BaSO₄ dissolves (b) Some BaSO₄ precipitates (c) Ksp of BaSO₄ increases (d) Nothing changes

22. The solubility of PbI₂ (molar mass 461 g mol⁻¹) is 0.70 g L⁻¹. Its Ksp is about (a) 2.3 × 10⁻⁶ (b) 3.5 × 10⁻⁹ (c) 1.4 × 10⁻⁸ (d) 4.9 × 10⁻¹¹

Level 3: Challenge

23. A solution is 0.010 M in Cl⁻ and 0.010 M in CrO₄²⁻. AgNO₃ is added slowly. (Ksp: AgCl 1.8 × 10⁻¹⁰, Ag₂CrO₄ 1.1 × 10⁻¹².) Which happens? (a) AgCl precipitates first (b) Ag₂CrO₄ precipitates first (c) both start together (d) neither precipitates

24. Ksp of CaF₂ is 3.2 × 10⁻¹¹. Its molar solubility in 0.10 M NaF is about (a) 2.0 × 10⁻⁴ M (b) 3.2 × 10⁻¹⁰ M (c) 8.0 × 10⁻¹¹ M (d) 3.2 × 10⁻⁹ M

25. Ksp of AgCl is 1.8 × 10⁻¹⁰. Its solubility in pure water is how many times its solubility in 0.010 M AgNO₃? (a) about 75 (b) about 750 (c) about 7500 (d) about 1.3

26. Equal volumes of 2.0 × 10⁻⁵ M AgNO₃ and 2.0 × 10⁻⁵ M NaCl are mixed (Ksp of AgCl = 1.8 × 10⁻¹⁰). Then (a) AgCl precipitates (b) the solution is supersaturated (c) no precipitate forms (d) Ksp changes

27. The saturated solution of a hydroxide M(OH)₂ has pH 10.0 at 298 K. Ksp of M(OH)₂ is (a) 5.0 × 10⁻¹³ (b) 1.0 × 10⁻¹² (c) 4.0 × 10⁻¹² (d) 1.0 × 10⁻⁸

28. Ksp of Bi₂S₃ is 1.08 × 10⁻⁷³. Its molar solubility is (a) 1.0 × 10⁻³⁷ M (b) 1.0 × 10⁻¹⁴ M (c) 3.3 × 10⁻³⁷ M (d) 1.0 × 10⁻¹⁵ M

29. Assertion (A): AgCl is less soluble in 0.10 M NaCl than in pure water. Reason (R): The Ksp of AgCl becomes smaller in the presence of NaCl. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: A salt with a smaller Ksp is always less soluble than a salt with a larger Ksp. Statement II: Ksp values can be compared directly to rank solubility only for salts of the same formula type. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bSolid omitted
2cs × (2s)²
3aSupersaturated
4dLe Chatelier, Q exceeds Ksp
5bLike every K
6d(2s)²(3s)³
7aDefinition of saturated
8cCoefficient 2 for Ag⁺
9bs × (3s)³
10cExcess Cl⁻
11a√(1.8 × 10⁻¹⁰)
12d4 × (2.0 × 10⁻⁴)³
13b(2.75 × 10⁻¹³)^(1/3)
14cEach 1.0 × 10⁻⁴ after mixing
15a1.8 × 10⁻¹⁰/0.10
16d[OH⁻] = 2.88 × 10⁻⁴ M
17b6.5 × 10⁻⁵ vs 1.3 × 10⁻⁵ M
18c1.34 × 10⁻⁵ × 143.5
19a108 × 10⁻²⁰
20d[OH⁻] = 3.46 × 10⁻⁵ M, pOH 4.46
21bCommon SO₄²⁻ pushes Q above Ksp
22cs = 1.52 × 10⁻³; 4s³
23aAgCl needs only 1.8 × 10⁻⁸ M Ag⁺
24dKsp/c² = 3.2 × 10⁻¹¹/0.010
25b1.34 × 10⁻⁵/1.8 × 10⁻⁸ = 745
26cQ = 1.0 × 10⁻¹⁰, less than Ksp
27a[M²⁺] = 5 × 10⁻⁵, [OH⁻] = 10⁻⁴
28d(10⁻⁷⁵)^(1/5)
29cs falls; Ksp is unchanged
30dAgCl vs Ag₂CrO₄ disproves I

Chapter 8 revision sheet

One-page summary

  • A sparingly soluble salt in contact with its saturated solution is in equilibrium with its ions.

  • Ksp = product of ion concentrations, each raised to its coefficient. The solid is left out.

  • If a salt AxBy has molar solubility s, Ksp = (xs)^x (ys)^y = x^x y^y s^(x+y).

  • AB: Ksp = s². AB₂ or A₂B: 4s³. AB₃ or A₃B: 27s⁴. A₃B₂ or A₂B₃: 108s⁵.

  • Ksp depends on temperature only; it does not change when a common ion is added.

  • Compare solubility from Ksp only for salts of the same formula type.

  • Ionic product (IP) > Ksp: precipitation. IP = Ksp: saturated. IP < Ksp: more can dissolve.

  • Common ion lowers solubility: for AgCl in c M NaCl, s ≈ Ksp/c.

  • When two ions can precipitate with the same reagent, the one that needs the lower reagent concentration precipitates first.

  • Group II sulphides (CuS, PbS, CdS) precipitate in acid (low [S²⁻]); Group IV (ZnS, NiS, CoS) need ammoniacal medium.

  • Salts of weak acids (CaCO₃, CaC₂O₄) dissolve more in acid because H⁺ removes the anion.

  • Complex formation (AgCl in NH₃) also raises solubility by lowering the free metal ion.

Must-remember table

Salt typeExampleKsp in terms of ss in terms of Ksp
ABAgCl, BaSO₄s²√Ksp
AB₂CaF₂, PbI₂4s³(Ksp/4)^(1/3)
A₂BAg₂CrO₄4s³(Ksp/4)^(1/3)
AB₃Fe(OH)₃, Al(OH)₃27s⁴(Ksp/27)^(1/4)
A₃B₂Ca₃(PO₄)₂108s⁵(Ksp/108)^(1/5)
AB in c M of common ionAgCl in NaCls × cKsp/c

Memory aids

  • "1-4-27-108": the multipliers for 2, 3, 4 and 5 ions: 1, 4, 27, 108 (from x^x y^y).

  • "IP Peeks over Ksp, Precipitate": when IP exceeds Ksp, solid comes out.

  • "Same Type, Then Compare": compare Ksp values only between salts of the same formula type.

  • "Common ion Cuts solubility, not Ksp" (CCN): solubility falls, Ksp stays.

Concept connections

  • Sulphide and hydroxide precipitation in salt analysis is used in Chemistry Book 20: Principles Related to Practical Chemistry.

  • Ksp of AgCl and AgBr ties to electrode potentials of Ag electrodes in Chemistry Book 7: Redox Reactions and Electrochemistry.

  • Complex formation raising solubility (AgCl in NH₃, [Ag(NH₃)₂]⁺) is studied in Chemistry Book 12: Coordination Compounds.

Practice MCQs: Chapter 8, Level 4 (new NEET pattern)

31. Match List I (salt) with List II (Ksp in terms of molar solubility s).

List IList II
A. AgCli. s²
B. CaF₂ii. 27s⁴
C. Ca₃(PO₄)₂iii. 4s³
D. Fe(OH)₃iv. 108s⁵

(a) A-i, B-iii, C-iv, D-ii (b) A-i, B-ii, C-iv, D-iii (c) A-iii, B-i, C-iv, D-ii (d) A-i, B-iii, C-ii, D-iv

32. Match List I (situation) with List II (result).

List IList II
A. Ionic product > Kspi. Unsaturated; more solid can dissolve
B. Ionic product = Kspii. Saturated; at equilibrium
C. Ionic product < Kspiii. Solubility falls; some solid separates
D. Common ion added to a saturated solutioniv. Precipitation occurs

(a) A-iv, B-i, C-ii, D-iii (b) A-iii, B-ii, C-i, D-iv (c) A-iv, B-ii, C-i, D-iii (d) A-ii, B-iv, C-i, D-iii

33. Match List I (salt and its Ksp) with List II (molar solubility).

List IList II
A. AB, Ksp = 1.6 × 10⁻⁹i. 1.0 × 10⁻⁴ M
B. AB₂, Ksp = 3.2 × 10⁻¹¹ii. 4.0 × 10⁻⁵ M
C. A₂B, Ksp = 4.0 × 10⁻¹²iii. 1.0 × 10⁻⁵ M
D. AB₃, Ksp = 2.7 × 10⁻¹⁹iv. 2.0 × 10⁻⁴ M

(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iii, B-iv, C-i, D-ii (d) A-iv, B-ii, C-i, D-iii

34. Match List I (application) with List II (principle).

List IList II
A. Group II sulphides precipitated in acid mediumi. Cl⁻ acts as the common ion
B. Soap separated by adding NaCl (salting out)ii. Complex formation lowers free [Ag⁺]
C. Pure NaCl obtained by passing HCl gas into brineiii. H⁺ suppresses ionisation of H₂S
D. AgCl dissolves in aqueous NH₃iv. Na⁺ acts as the common ion

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

35. How many of the following statements are correct?

  • A. Ksp of a salt depends on temperature.

  • B. AgCl is less soluble in 0.1 M NaCl than in pure water.

  • C. Ksp of AgCl decreases in 0.1 M NaCl.

  • D. A salt with a smaller Ksp is always less soluble than one with a larger Ksp.

  • E. Precipitation starts when the ionic product exceeds Ksp.

(a) Two (b) Three (c) Four (d) Five

36. Choose the correct set of statements.

  • A. For Ag₂CrO₄, Ksp = 4s³.

  • B. CaCO₃ is more soluble in dilute acid than in pure water.

  • C. Adding AgNO₃ to a saturated AgCl solution increases Ksp of AgCl.

  • D. In a saturated solution of Ca₃(PO₄)₂, [Ca²⁺] = 1.5 [PO₄³⁻].

(a) A and C only (b) B and C only (c) A, B and D only (d) A, B, C and D

37. For BaSO₄ (solubility in water much less than 0.01 M), choose the correct set.

  • A. Its solubility in 0.01 M Na₂SO₄ is about Ksp/0.01.

  • B. Adding BaCl₂ to its saturated solution precipitates more BaSO₄.

  • C. Its solubility in pure water is √Ksp.

  • D. Its solubility rises when Na₂SO₄ is added.

(a) A, B and C only (b) A and D only (c) B and D only (d) A, B, C and D

38. In each case, equal volumes of two 2.0 × 10⁻⁴ M solutions are mixed. Ksp values: AgCl 1.8 × 10⁻¹⁰, BaSO₄ 1.1 × 10⁻¹⁰, CaSO₄ 2.4 × 10⁻⁵, PbCl₂ 1.7 × 10⁻⁵. In how many cases does a precipitate form?

  • A. AgNO₃ + NaCl

  • B. BaCl₂ + Na₂SO₄

  • C. CaCl₂ + Na₂SO₄

  • D. Pb(NO₃)₂ + NaCl

(a) One (b) Three (c) Four (d) Two

39. The table gives Ksp values of four salts at 298 K.

SaltFormula typeKsp
PAB1.0 × 10⁻¹⁰
QAB₂4.0 × 10⁻¹²
RA₂B3.2 × 10⁻¹¹
SAB2.5 × 10⁻⁹

The order of molar solubility is:

(a) S > P > R > Q (b) R > Q > S > P (c) Q > R > S > P (d) R > S > Q > P

40. The solubility s of Ag₂CrO₄ is measured in K₂CrO₄ solutions of different concentrations c (c much larger than s). A graph of log s (y-axis) against log c (x-axis) is a straight line of slope:

(a) −1 (b) +1/2 (c) −1/2 (d) −2

41. A solution is 0.10 M in Mg²⁺. Ksp of Mg(OH)₂ = 1.0 × 10⁻¹¹. At 298 K, Mg(OH)₂ just begins to precipitate when the pH is raised to:

(a) 9.0 (b) 5.0 (c) 11.0 (d) 10.0

Passage for Q42–Q43: A water-treatment plant in Jaipur adds fluoride to water that contains 1.0 × 10⁻³ M Ca²⁺. The engineers must keep CaF₂ from forming scale in the pipes. Take Ksp of CaF₂ = 4.0 × 10⁻¹¹ at the working temperature.

42. The highest [F⁻] that can be present without precipitating CaF₂ is:

(a) 4.0 × 10⁻⁸ M (b) 6.3 × 10⁻⁴ M (c) 4.0 × 10⁻⁴ M (d) 2.0 × 10⁻⁴ M

43. The molar solubility of CaF₂ in pure water at the same temperature is about:

(a) 6.3 × 10⁻⁶ M (b) 2.2 × 10⁻⁴ M (c) 3.4 × 10⁻⁴ M (d) 1.0 × 10⁻⁴ M

44. Ksp of Ag₂CrO₄ is 1.1 × 10⁻¹². Its molar solubility in 0.010 M AgNO₃ is:

(a) 1.1 × 10⁻¹⁰ M (b) 1.1 × 10⁻⁶ M (c) 1.1 × 10⁻⁸ M (d) 6.5 × 10⁻⁵ M

45. A solution is 0.010 M in both Cl⁻ and CrO₄²⁻. AgNO₃ is added slowly (ignore volume change). Ksp: AgCl = 1.8 × 10⁻¹⁰, Ag₂CrO₄ = 1.1 × 10⁻¹². Which is correct?

(a) AgCl precipitates first; [Cl⁻] left when Ag₂CrO₄ starts is about 1.7 × 10⁻⁵ M (b) Ag₂CrO₄ precipitates first, because its Ksp is smaller (c) Both start together (d) AgCl precipitates first; [Cl⁻] left when Ag₂CrO₄ starts is about 1.8 × 10⁻⁸ M

Level 4 answer key

QAnsReason
31aMultipliers 1, 4, 108, 27 from x^x y^y
32cCompare IP with Ksp; common ion reduces solubility
33bs = √(1.6 × 10⁻⁹); (8 × 10⁻¹²)^(1/3); (10⁻¹²)^(1/3); (10⁻²⁰)^(1/4)
34dCommon ions H⁺, Na⁺, Cl⁻; complex formation for AgCl in NH₃
35bA, B, E true; Ksp is unchanged by common ion; compare only same type
36cKsp depends only on T; [Ca²⁺] : [PO₄³⁻] = 3s : 2s
37aCommon ion lowers solubility of BaSO₄
38dAfter mixing, each ion is 1.0 × 10⁻⁴ M; IP 10⁻⁸ beats AgCl and BaSO₄ Ksp only
39bs: P 1.0 × 10⁻⁵, Q 1.0 × 10⁻⁴, R 2.0 × 10⁻⁴, S 5.0 × 10⁻⁵
40cKsp = (2s)²c, so s = ½√(Ksp/c)
41a[OH⁻] = √(10⁻¹¹/0.10) = 10⁻⁵ M, pOH 5, pH 9
42d[F⁻] = √(4.0 × 10⁻¹¹/1.0 × 10⁻³) = 2.0 × 10⁻⁴ M
43b4s³ = 4.0 × 10⁻¹¹, s = (10⁻¹¹)^(1/3) = 2.15 × 10⁻⁴ M
44cs = Ksp/[Ag⁺]² = 1.1 × 10⁻¹²/10⁻⁴
45aAgCl needs [Ag⁺] = 1.8 × 10⁻⁸ M; Ag₂CrO₄ needs 1.05 × 10⁻⁵ M; [Cl⁻] = 1.8 × 10⁻¹⁰/1.05 × 10⁻⁵
22 min left
‹
›