Chapter 4 of 12 · 23 min read

Chapter 2: Law of Chemical Equilibrium, Kc and Kp

What you will learn

  • The law of mass action and the law of chemical equilibrium.

  • How to write Kc and Kp for homogeneous and heterogeneous reactions.

  • The derivation of Kp = Kc(RT)^Δn and how to use it.

  • What the size of K tells you, and the units of K.

  • The reaction quotient Q and how Q vs K predicts the direction of change.

  • How K changes when you reverse, multiply or add reactions.

2.1 Law of mass action

In 1864, Guldberg and Waage proposed the law of mass action. At constant temperature, the rate of a reaction is proportional to the product of the active masses of the reactants. Each active mass is raised to its stoichiometric coefficient. For gases and solutes, active mass means molar concentration.

Take a general reaction in one step:

aA+bB⇌cC+dD\mathrm{aA + bB \rightleftharpoons cC + dD}
rf=kf[A]a[B]brb=kb[C]c[D]dr_f = k_f[A]^a[B]^b \qquad r_b = k_b[C]^c[D]^d

At equilibrium r_f = r_b, so

kf[A]a[B]b=kb[C]c[D]d  ⇒  Kc=kfkb=[C]c[D]d[A]a[B]bk_f[A]^a[B]^b = k_b[C]^c[D]^d \;\Rightarrow\; K_c = \frac{k_f}{k_b} = \frac{[C]^c[D]^d}{[A]^a[B]^b}

This is the law of chemical equilibrium. It holds for any balanced reaction, even one that goes by several steps. The exponents come from the balanced equation, not from experiment.

2.2 Writing Kc

Kc = (product of product concentrations, each raised to its coefficient) divided by (product of reactant concentrations, each raised to its coefficient).

N2(g)+3H2(g)⇌2NH3(g)Kc=[NH3]2[N2][H2]3\mathrm{N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g)} \qquad K_c = \frac{[NH_3]^2}{[N_2][H_2]^3}
N2O4(g)⇌2NO2(g)Kc=[NO2]2[N2O4]\mathrm{N_2O_4(g) \rightleftharpoons 2NO_2(g)} \qquad K_c = \frac{[NO_2]^2}{[N_2O_4]}

The value of K is fixed for a given reaction at a given temperature. It does not depend on starting amounts, pressure, volume or a catalyst. Only temperature changes K.

2.3 Kp for gas reactions

For gases we can use partial pressures instead of concentrations:

Kp=pC c pD dpA a pB bK_p = \frac{p_C^{\,c}\, p_D^{\,d}}{p_A^{\,a}\, p_B^{\,b}}

Deriving the link. For an ideal gas, pV = nRT, so p = (n/V)RT = [gas]RT. Substitute this for every gas:

Kp=([C]RT)c([D]RT)d([A]RT)a([B]RT)b=[C]c[D]d[A]a[B]b(RT)(c+d)−(a+b)K_p = \frac{([C]RT)^c([D]RT)^d}{([A]RT)^a([B]RT)^b} = \frac{[C]^c[D]^d}{[A]^a[B]^b}(RT)^{(c+d)-(a+b)}
Kp=Kc (RT)ΔngK_p = K_c\,(RT)^{\Delta n_g}

Here Δn_g = (moles of gaseous products) − (moles of gaseous reactants). Use R = 0.0821 L atm K⁻¹ mol⁻¹ when pressures are in atm (0.0831 L bar K⁻¹ mol⁻¹ for bar).

Δn_gRelationExample
0Kp = KcH₂ + I₂ ⇌ 2HI
positiveKp greater than Kc (when RT greater than 1)PCl₅ ⇌ PCl₃ + Cl₂ (Δn = +1)
negativeKp less than Kc (when RT greater than 1)N₂ + 3H₂ ⇌ 2NH₃ (Δn = −2)

With R = 0.0821, RT is greater than 1 for any T above about 12 K, so the middle column holds for every real case in NEET.

2.4 Units of K

Units of Kc are (mol L⁻¹)^Δn and units of Kp are (atm)^Δn or (bar)^Δn. When Δn = 0, K has no units. For example, Kc for N₂ + 3H₂ ⇌ 2NH₃ has units (mol L⁻¹)⁻² = mol⁻² L².

Strictly, thermodynamic K is always dimensionless, because each concentration is divided by a standard value (1 mol L⁻¹ or 1 bar). NEET still asks for the units above, so learn both views.

2.5 Heterogeneous equilibria

When more than one phase is present, the equilibrium is heterogeneous. The concentration of a pure solid or pure liquid is fixed by its density, so it stays constant. It is absorbed into K and left out of the expression.

CaCO3(s)⇌CaO(s)+CO2(g)Kc=[CO2],Kp=pCO2\mathrm{CaCO_3(s) \rightleftharpoons CaO(s) + CO_2(g)} \qquad K_c = [CO_2], \quad K_p = p_{CO_2}

So at a given temperature, the pressure of CO₂ over limestone is fixed. Adding more CaCO₃ or CaO does not change it, as long as some of each solid is present. This is what happens in a lime kiln.

Ni(s)+4CO(g)⇌Ni(CO)4(g)Kc=[Ni(CO)4][CO]4\mathrm{Ni(s) + 4CO(g) \rightleftharpoons Ni(CO)_4(g)} \qquad K_c = \frac{[Ni(CO)_4]}{[CO]^4}
H2O(l)⇌H2O(g)Kp=pH2O\mathrm{H_2O(l) \rightleftharpoons H_2O(g)} \qquad K_p = p_{H_2O}

2.6 What the size of K tells you

Size of KMeaningExample (approximate)
K greater than about 10³Products dominate; reaction goes nearly to completionH₂ + Cl₂ ⇌ 2HCl, K about 10³² at 300 K
K between about 10⁻³ and 10³Reactants and products both present in fair amountsH₂ + I₂ ⇌ 2HI, K about 50 at 700 K
K less than about 10⁻³Reactants dominate; very little product formsN₂ + O₂ ⇌ 2NO, K about 10⁻³⁰ at 300 K

K tells you how far a reaction goes. It says nothing about how fast it gets there. A reaction with a huge K can still be very slow.

2.7 Reaction quotient Q and the direction of change

The reaction quotient Q has the same form as K. The difference is that Q uses the concentrations at any moment, not only at equilibrium.

Qc=[C]c[D]d[A]a[B]b(at any instant)Q_c = \frac{[C]^c[D]^d}{[A]^a[B]^b} \quad \text{(at any instant)}
  • Q less than K: too few products. The reaction moves forward.

  • Q = K: the system is at equilibrium. No net change.

  • Q greater than K: too many products. The reaction moves backward.

Figure 2.1 · Comparing Q with K predicts the direction of change
Figure 2.1 · Comparing Q with K predicts the direction of change

Whichever side of K the value of Q starts on, the net reaction runs in the direction that brings Q to K, where the change stops.

2.8 Manipulating K

Change to the equationNew equilibrium constant
Reverse the reaction1/K
Multiply all coefficients by nKⁿ
Divide all coefficients by nK^(1/n), the nth root
Add two reactions (1) + (2)K₁ × K₂
Subtract reaction (2) from (1)K₁ / K₂

These follow straight from the form of K. Doubling every coefficient squares every term in the expression, so K becomes K².

2.9 Worked examples

Worked example 2.1: Write Kc for (i) 4NH₃(g) + 5O₂(g) ⇌ 4NO(g) + 6H₂O(g) and (ii) Fe₃O₄(s) + 4H₂(g) ⇌ 3Fe(s) + 4H₂O(g).

Solution:

(i) Kc=[NO]4[H2O]6[NH3]4[O2]5(ii) Kc=[H2O]4[H2]4\text{(i) } K_c = \frac{[NO]^4[H_2O]^6}{[NH_3]^4[O_2]^5} \qquad \text{(ii) } K_c = \frac{[H_2O]^4}{[H_2]^4}

In (ii), Fe₃O₄ and Fe are solids, so they are left out.

Worked example 2.2: At equilibrium at 300 K, [N₂O₄] = 0.040 M and [NO₂] = 0.012 M. Find Kc for N₂O₄ ⇌ 2NO₂.

Solution:

Kc=(0.012)20.040=1.44×10−40.040=3.6×10−3 mol L−1K_c = \frac{(0.012)^2}{0.040} = \frac{1.44 \times 10^{-4}}{0.040} = 3.6 \times 10^{-3}\ \text{mol L}^{-1}

Worked example 2.3: For N₂ + 3H₂ ⇌ 2NH₃, Kc = 0.50 mol⁻² L² at 500 K. Find Kp in atm.

Solution: Δn_g = 2 − 4 = −2. RT = 0.0821 × 500 = 41.05.

Kp=0.50×(41.05)−2=0.501685=2.97×10−4 atm−2K_p = 0.50 \times (41.05)^{-2} = \frac{0.50}{1685} = 2.97 \times 10^{-4}\ \text{atm}^{-2}

Worked example 2.4: For 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), Kc = 400 at a certain temperature. Find Kc for SO₃(g) ⇌ SO₂(g) + ½O₂(g).

Solution: The new reaction is the original reversed and halved. So K = (1/400)^(1/2) = 1/20 = 0.050.

Worked example 2.5: A ⇌ B has K₁ = 4.0 and B ⇌ C has K₂ = 0.50 at the same temperature. Find K for A ⇌ C and for 2C ⇌ 2A.

Solution: Adding gives A ⇌ C, so K = 4.0 × 0.50 = 2.0. Reversing and doubling gives 2C ⇌ 2A, so K = (1/2.0)² = 0.25.

Worked example 2.6: For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 50 at a certain temperature. A flask holds [H₂] = 0.10 M, [I₂] = 0.20 M and [HI] = 0.80 M. Is it at equilibrium? If not, which way will it move?

Solution:

Qc=(0.80)2(0.10)(0.20)=0.640.020=32Q_c = \frac{(0.80)^2}{(0.10)(0.20)} = \frac{0.64}{0.020} = 32

Q = 32 is less than K = 50. The reaction moves forward, forming more HI until Q reaches 50.

Worked example 2.7: Solid NH₄HS is placed in an empty flask at 300 K. It decomposes: NH₄HS(s) ⇌ NH₃(g) + H₂S(g). The total pressure at equilibrium is 0.60 atm. Find Kp.

Solution: Both gases form in a 1 : 1 ratio, so each has a partial pressure of 0.30 atm.

Kp=pNH3 pH2S=(0.30)(0.30)=0.090 atm2K_p = p_{NH_3}\,p_{H_2S} = (0.30)(0.30) = 0.090\ \text{atm}^2

Worked example 2.8: Solid ammonium carbamate decomposes in a closed vessel: NH₂COONH₄(s) ⇌ 2NH₃(g) + CO₂(g). The total pressure at equilibrium is P. Express Kp in terms of P, and find it for P = 0.30 atm.

Solution: Gases form in a 2 : 1 ratio, so p(NH₃) = 2P/3 and p(CO₂) = P/3.

Kp=(2P3)2(P3)=4P327K_p = \left(\frac{2P}{3}\right)^2 \left(\frac{P}{3}\right) = \frac{4P^3}{27}

For P = 0.30 atm: Kp = 4 × 0.027 / 27 = 4.0 × 10⁻³ atm³.

Worked example 2.9: For CO(g) + ½O₂(g) ⇌ CO₂(g), find the ratio Kp/Kc.

Solution: Δn_g = 1 − 1.5 = −0.5. So Kp/Kc = (RT)^(−1/2) = 1/√(RT).

Quick revision

  • Kc = [products]^coefficients / [reactants]^coefficients, at equilibrium only.

  • Kp = Kc(RT)^Δn_g, with Δn_g counting gaseous moles only.

  • K changes only with temperature; not with concentration, pressure or catalyst.

  • Pure solids and liquids are left out of K.

  • Q less than K: forward. Q greater than K: backward. Q = K: at equilibrium.

  • Reverse: 1/K. Multiply by n: Kⁿ. Add reactions: multiply K values.

  • Large K tells extent, not speed.

NEET traps

  • Counting solids or liquids in Δn_g. Only gases count.

  • Using moles instead of concentrations in Kc when the volume is not 1 L.

  • Thinking a catalyst changes K. It speeds up both directions equally.

  • Taking the square root of K when a reaction is doubled. Doubling means squaring.

  • Writing "Kp is always greater than Kc". It depends on the sign of Δn_g.

  • Adding more solid to a heterogeneous equilibrium and expecting the gas pressure to rise.

Practice MCQs: Chapter 2

Level 1: Concept check

1. For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), Kc is (a) [N₂][H₂]³/[NH₃]² (b) [NH₃]²/([N₂][H₂]³) (c) [NH₃]/([N₂][H₂]) (d) 2[NH₃]/([N₂] × 3[H₂])

2. Kp equals Kc when (a) Δn_g = 1 (b) Δn_g = −1 (c) Δn_g = 0 (d) T = 273 K

3. For 2SO₃(g) ⇌ 2SO₂(g) + O₂(g), Δn_g is (a) +1 (b) −1 (c) 0 (d) +3

4. The units of Kc for N₂(g) + 3H₂(g) ⇌ 2NH₃(g) are (a) mol L⁻¹ (b) mol² L⁻² (c) no units (d) mol⁻² L²

5. If the reaction quotient Q is less than K, the reaction (a) is at equilibrium (b) moves forward (c) moves backward (d) stops

6. If K is the equilibrium constant for a reaction, the constant for the reverse reaction is (a) 1/K (b) −K (c) K² (d) √K

7. For CaCO₃(s) ⇌ CaO(s) + CO₂(g), Kp equals (a) p(CaO) × p(CO₂)/p(CaCO₃) (b) 1/p(CO₂) (c) p(CO₂) (d) p(CO₂)²

8. A reaction has K = 10¹⁰ at 298 K. This means that at equilibrium (a) the reaction is very fast (b) reactants dominate (c) reactants and products are equal (d) products dominate

9. The equilibrium constant of a given reaction depends on (a) initial concentrations (b) temperature (c) pressure (d) the catalyst used

10. The law of mass action was proposed by (a) Guldberg and Waage (b) Le Chatelier (c) Arrhenius (d) Henry

Level 2: NEET standard

11. At equilibrium, [N₂O₄] = 0.050 M and [NO₂] = 0.015 M for N₂O₄ ⇌ 2NO₂. Kc is (a) 0.30 (b) 4.5 × 10⁻⁴ (c) 4.5 × 10⁻³ (d) 3.3 × 10⁻²

12. Kc for 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) is 900. Kc for SO₃(g) ⇌ SO₂(g) + ½O₂(g) is (a) 30 (b) 1/900 (c) 450 (d) 0.033

13. A ⇌ B has K = 3 and B ⇌ C has K = 5. K for 2A ⇌ 2C is (a) 15 (b) 225 (c) 30 (d) 8

14. For PCl₅(g) ⇌ PCl₃(g) + Cl₂(g), Kc = 0.040 mol L⁻¹ at 500 K. Kp (in atm) is about (a) 1.64 (b) 0.040 (c) 9.7 × 10⁻⁴ (d) 20.5

15. For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), Kp/Kc equals (a) RT (b) (RT)² (c) (RT)⁻² (d) 1

16. For H₂ + I₂ ⇌ 2HI, Kc = 49. A flask has [H₂] = [I₂] = 0.20 M and [HI] = 1.6 M. The reaction will (a) move forward (b) stay at equilibrium (c) need a catalyst to move (d) move backward

17. NH₄HS(s) ⇌ NH₃(g) + H₂S(g) reaches equilibrium with a total pressure of 0.60 atm. Kp is (a) 0.36 atm² (b) 0.090 atm² (c) 0.30 atm² (d) 0.18 atm²

18. At 500 K, for which reaction is Kp greater than Kc? (a) PCl₅(g) ⇌ PCl₃(g) + Cl₂(g) (b) N₂(g) + 3H₂(g) ⇌ 2NH₃(g) (c) H₂(g) + I₂(g) ⇌ 2HI(g) (d) 2SO₂(g) + O₂(g) ⇌ 2SO₃(g)

19. Kc for 2HI ⇌ H₂ + I₂ is 0.020. Kc for HI ⇌ ½H₂ + ½I₂ is (a) 0.010 (b) 0.040 (c) 0.14 (d) 50

20. For Fe₃O₄(s) + 4H₂(g) ⇌ 3Fe(s) + 4H₂O(g), Kc is (a) [Fe]³[H₂O]⁴/([Fe₃O₄][H₂]⁴) (b) [H₂O]/[H₂] (c) [H₂]⁴/[H₂O]⁴ (d) [H₂O]⁴/[H₂]⁴

21. A 2.0 L flask at equilibrium holds 0.40 mol N₂O₄ and 0.20 mol NO₂. Kc for N₂O₄ ⇌ 2NO₂ is (a) 0.050 (b) 0.10 (c) 0.50 (d) 0.025

22. For CO(g) + ½O₂(g) ⇌ CO₂(g), Kp/Kc equals (a) (RT)^(1/2) (b) (RT)^(−1/2) (c) RT (d) 1

Level 3: Challenge

23. Ammonium carbamate decomposes: NH₂COONH₄(s) ⇌ 2NH₃(g) + CO₂(g). The total pressure at equilibrium is 0.30 atm. Kp is (a) 2.7 × 10⁻² atm³ (b) 1.0 × 10⁻³ atm³ (c) 4.0 × 10⁻³ atm³ (d) 9.0 × 10⁻³ atm³

24. For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 64. 1.0 mol H₂ and 1.0 mol I₂ are heated in a 1.0 L flask. The amount of HI at equilibrium is (a) 0.80 mol (b) 1.0 mol (c) 1.8 mol (d) 1.6 mol

25. N₂ + O₂ ⇌ 2NO has constant K₁, and 2NO + O₂ ⇌ 2NO₂ has constant K₂. The constant for N₂ + 2O₂ ⇌ 2NO₂ is (a) K₁K₂ (b) K₁/K₂ (c) K₁ + K₂ (d) K₂/K₁

26. The equilibrium constant for ½N₂ + 3/2 H₂ ⇌ NH₃ is K. The constant for 2NH₃ ⇌ N₂ + 3H₂ is (a) 1/K (b) 1/K² (c) K² (d) 1/√K

27. For 2A(g) ⇌ B(g), Kp = 0.050 atm⁻¹ at 400 K. Kc (in L mol⁻¹) is about (a) 0.050 (b) 1.5 × 10⁻³ (c) 1.64 (d) 0.61

28. For CaCO₃(s) ⇌ CaO(s) + CO₂(g), Kp = 0.50 atm at a certain temperature. A closed vessel at that temperature holds CaCO₃, CaO and CO₂ at 0.30 atm. What happens? (a) CO₂ combines with CaO to form CaCO₃ (b) No change occurs (c) All the CaO is removed (d) More CaCO₃ decomposes

29. Assertion (A): For H₂(g) + I₂(g) ⇌ 2HI(g), Kp and Kc are equal and have no units. Reason (R): Kp = Kc(RT)^Δn_g, and Δn_g = 0 for this reaction. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Adding more CaCO₃ to the equilibrium CaCO₃(s) ⇌ CaO(s) + CO₂(g) at constant temperature raises the pressure of CO₂. Statement II: The active mass of a pure solid is constant. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bProducts over reactants, powers = coefficients
2c(RT)⁰ = 1
3a3 − 2 = +1
4d(mol L⁻¹)⁻²
5bToo few products, so forward
6aReversing inverts K
7cSolids omitted
8dLarge K, products favoured
9bOnly T changes K
10aProposed in 1864
11c(0.015)²/0.050 = 4.5 × 10⁻³
12d(1/900)^(1/2) = 1/30
13bA ⇌ C is 15; doubled gives 15²
14a0.040 × 0.0821 × 500 = 1.64
15cΔn_g = −2
16dQ = 2.56/0.04 = 64, greater than 49
17bEach 0.30 atm; 0.30 × 0.30
18aOnly this has Δn_g positive
19c√0.020 = 0.14
20dSolids omitted
21a[NO₂] = 0.10, [N₂O₄] = 0.20; 0.01/0.20
22bΔn_g = −1/2
23c4P³/27 = 4 × 0.027/27
24d2x/(1 − x) = 8 gives x = 0.8; HI = 2x
25aAdding reactions multiplies K
26bReverse and double: (1/K)²
27cKc = Kp(RT) = 0.050 × 32.84
28dQ = 0.30 less than 0.50, so forward
29aΔn_g = 0 makes them equal and unitless
30dSolid's amount does not affect K or p(CO₂)

Chapter 2 revision sheet

One-page summary

  • Law of mass action: rate is proportional to the product of active masses (molar concentrations).

  • For aA + bB ⇌ cC + dD, Kc = [C]^c[D]^d / [A]^a[B]^b at equilibrium.

  • Kp uses partial pressures of gases in place of concentrations.

  • Kp = Kc(RT)^Δn_g, where Δn_g = moles of gaseous products − moles of gaseous reactants.

  • Δn_g = 0 gives Kp = Kc and K has no units.

  • Units of Kc = (mol L⁻¹)^Δn; units of Kp = (atm or bar)^Δn.

  • Pure solids and pure liquids are left out of K (heterogeneous equilibria).

  • K depends only on temperature for a given balanced equation. Catalysts and starting amounts do not change it.

  • K > 10³: products dominate. K < 10⁻³: reactants dominate. In between: both appreciable.

  • K tells how far, not how fast.

  • Q has the same form as K but uses present values. Q < K: forward; Q > K: backward; Q = K: equilibrium.

  • Reverse: 1/K. Multiply by n: K^n. Divide by n: K^(1/n). Add reactions: multiply K values.

Must-remember table

Reaction typeΔn_gKp vs KcUnits of Kc
H₂ + I₂ ⇌ 2HI0Kp = Kcnone
PCl₅ ⇌ PCl₃ + Cl₂+1Kp = Kc(RT)mol L⁻¹
2SO₂ + O₂ ⇌ 2SO₃−1Kp = Kc(RT)⁻¹L mol⁻¹
N₂ + 3H₂ ⇌ 2NH₃−2Kp = Kc(RT)⁻²L² mol⁻²
CaCO₃(s) ⇌ CaO(s) + CO₂(g)+1Kp = p(CO₂)mol L⁻¹
NH₄HS(s) ⇌ NH₃(g) + H₂S(g)+2Kp = P²/4mol² L⁻²

Memory aids

  • "Products Over Reactants, Powers from Coefficients" (POR-PC): the shape of every K expression.

  • "Solids and Liquids Sit Out" (SLSO): pure solids and liquids never enter K.

  • "Flip, Power, Multiply": Flip the equation → 1/K; multiply by n → K to the Power n; add equations → Multiply the K values.

  • "Q Low, Go": Q lower than K, the reaction goes forward.

Concept connections

  • Rate constants k_f and k_b behind K = k_f/k_b are developed in Chemistry Book 8: Chemical Kinetics.

  • Partial pressures and mole fractions use the gas laws of Chemistry Book 1: Some Basic Concepts in Chemistry.

  • Equilibrium constants for complex formation reappear in Chemistry Book 12: Coordination Compounds (stability constants).

Practice MCQs: Chapter 2, Level 4 (new NEET pattern)

31. Match List I (reaction) with List II (relation).

List IList II
A. H₂(g) + I₂(g) ⇌ 2HI(g)i. Kp = Kc(RT)
B. N₂(g) + 3H₂(g) ⇌ 2NH₃(g)ii. Kp = p(CO₂)
C. PCl₅(g) ⇌ PCl₃(g) + Cl₂(g)iii. Kp = Kc
D. CaCO₃(s) ⇌ CaO(s) + CO₂(g)iv. Kp = Kc(RT)⁻²

(a) A-iii, B-i, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-ii, B-iv, C-i, D-iii (d) A-iv, B-iii, C-ii, D-i

32. The equilibrium constant of a reaction is K. Match List I (change in the equation) with List II (new constant).

List IList II
A. Equation reversedi. K₁ × K₂
B. Equation multiplied by 2ii. √K
C. Equation divided by 2iii. 1/K
D. Two equations (constants K₁, K₂) addediv. K²

(a) A-iii, B-ii, C-iv, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-i, B-iv, C-ii, D-iii (d) A-iii, B-iv, C-ii, D-i

33. Match List I (reaction) with List II (units of Kc).

List IList II
A. N₂(g) + 3H₂(g) ⇌ 2NH₃(g)i. L mol⁻¹
B. PCl₅(g) ⇌ PCl₃(g) + Cl₂(g)ii. No units
C. H₂(g) + I₂(g) ⇌ 2HI(g)iii. L² mol⁻²
D. 2NO₂(g) ⇌ N₂O₄(g)iv. mol L⁻¹

(a) A-iii, B-iv, C-ii, D-i (b) A-i, B-iv, C-ii, D-iii (c) A-iii, B-ii, C-iv, D-i (d) A-iv, B-iii, C-ii, D-i

34. Match List I (condition) with List II (what it tells you).

List IList II
A. K > 10³i. Reaction moves backward
B. K < 10⁻³ii. Both reactants and products in appreciable amounts
C. 10⁻³ < K < 10³iii. Reaction nearly complete
D. Q > Kiv. Reaction hardly proceeds

(a) A-ii, B-iv, C-iii, D-i (b) A-iii, B-i, C-ii, D-iv (c) A-iii, B-iv, C-ii, D-i (d) A-iv, B-iii, C-ii, D-i

35. How many of the following statements are correct?

  • A. For a given balanced equation, K depends only on temperature.

  • B. A catalyst increases the value of K.

  • C. K changes when the starting concentrations change.

  • D. Pure solids and liquids are left out of the K expression.

  • E. Kp = Kc when Δn_g = 0.

(a) One (b) Two (c) Three (d) Four

36. For NH₄HS(s) ⇌ NH₃(g) + H₂S(g), started from pure solid, choose the correct set.

  • A. Kp = p(NH₃) × p(H₂S)

  • B. Adding more NH₄HS(s) raises the equilibrium pressure.

  • C. If the total pressure at equilibrium is P, Kp = P²/4.

  • D. Kp = Kc(RT)²

(a) A and B only (b) A, C and D only (c) B, C and D only (d) A and D only

37. Choose the correct set of statements about the reaction quotient Q.

  • A. Q has the same form as K but uses concentrations at any moment.

  • B. If Q = K, the system is at equilibrium.

  • C. If Q > K, more product forms.

  • D. Q changes as the reaction proceeds; K does not at fixed T.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

38. How many of these reactions have Kp = Kc?

  • A. H₂(g) + Cl₂(g) ⇌ 2HCl(g)

  • B. N₂(g) + O₂(g) ⇌ 2NO(g)

  • C. C(s) + CO₂(g) ⇌ 2CO(g)

  • D. CO(g) + H₂O(g) ⇌ CO₂(g) + H₂(g)

  • E. 2SO₂(g) + O₂(g) ⇌ 2SO₃(g)

  • F. Fe₃O₄(s) + 4H₂(g) ⇌ 3Fe(s) + 4H₂O(g)

(a) Three (b) Four (c) Five (d) Two

39. For A(g) ⇌ 2B(g) in a 1 L flask, a concentration–time graph shows [A] falling from 1.0 M to 0.40 M and [B] rising from 0 to 1.2 M. Both lines become flat after 20 s. Kc is:

(a) 3.0 (b) 1.2 (c) 0.36 (d) 3.6

40. The table lists K for three reactions at 298 K.

ReactionK
I0.8
II5 × 10²⁵
III2 × 10⁻⁴⁰

In which reaction will the equilibrium mixture contain appreciable amounts of both reactants and products?

(a) I only (b) II only (c) III only (d) II and III

41. For H₂(g) + I₂(g) ⇌ 2HI(g), K = 50 at a certain T. Three mixtures are made (all in mol L⁻¹).

Mixture[H₂][I₂][HI]
X0.100.100.50
Y0.100.101.0
Z0.200.101.0

The correct directions are:

(a) X backward, Y forward, Z at equilibrium (b) X forward, Y forward, Z backward (c) X forward, Y backward, Z at equilibrium (d) X at equilibrium, Y backward, Z forward

Passage for Q42–Q43: A fertiliser lab studies N₂(g) + 3H₂(g) ⇌ 2NH₃(g) at 500 K. At this temperature Kc = 0.50 L² mol⁻². Take R = 0.0821 L atm K⁻¹ mol⁻¹.

42. Kc for NH₃(g) ⇌ ½N₂(g) + 3/2 H₂(g) at 500 K is:

(a) 2.0 (b) 1.41 (c) 0.71 (d) 4.0

43. Kp for the original reaction at 500 K is about:

(a) 20.5 atm⁻² (b) 8.4 × 10² atm⁻² (c) 1.2 × 10⁻² atm⁻² (d) 3.0 × 10⁻⁴ atm⁻²

44. For A(g) ⇌ B(g), K₁ = 4. For B(g) ⇌ C(g), K₂ = 0.5. At the same T, K for 2A(g) ⇌ 2C(g) is:

(a) 4 (b) 2 (c) 1 (d) 16

45. Pure solid NH₄HS gives a total equilibrium pressure of 0.84 atm at a fixed T. Some NH₄HS(s) is now placed in a flask that already holds NH₃ at 0.60 atm, at the same T. At equilibrium, p(H₂S) is about:

(a) 0.42 atm (b) 0.29 atm (c) 0.22 atm (d) 0.18 atm

Level 4 answer key

QAnsReason
31bΔn_g = 0, −2, +1; solid system gives Kp = p(CO₂)
32dReverse 1/K, double K², halve √K, add K₁K₂
33aUnits = (mol L⁻¹)^Δn with Δn = −2, +1, 0, −1
34cLarge K complete, small K hardly, middle both; Q > K backward
35cA, D, E true; catalyst and starting amounts do not change K
36bSolid amount does not matter; p = P/2 each; Δn_g = 2
37aQ > K means the reaction moves backward
38bA, B, D and F have Δn_g = 0
39dKc = (1.2)²/0.40 = 3.6
40aOnly K near 1 gives both in appreciable amounts
41cQ = 25 (< 50), 100 (> 50), 50 (= K)
42bReverse and halve: 1/√0.50 = 1.41
43dKp = 0.50 × (0.0821 × 500)⁻² = 2.97 × 10⁻⁴
44a(K₁K₂)² = (2)² = 4
45cKp = 0.42² = 0.1764; (0.60 + x)x = 0.1764 gives x = 0.22
23 min left
‹
›