Chapter 10 of 12 · 22 min read

Chapter 8: Batteries and Fuel Cells

Every battery is a galvanic cell built to be compact, safe and steady. A dry cell is used once and thrown away; a lead storage battery is recharged thousands of times; a fuel cell runs as long as fuel and oxygen are fed in. NEET asks mostly for the electrode reactions and the overall reaction of each.

What you will learn

  • The difference between primary cells, secondary cells and fuel cells.

  • The construction and reactions of the dry (Leclanché) cell, with a note on the mercury cell.

  • The discharge and charge reactions of the lead storage battery (lead accumulator).

  • How the H₂–O₂ fuel cell works and why it is more efficient than a thermal power plant.

  • Simple stoichiometry on battery reactions.

8.1 Primary, secondary and fuel cells

TypeCan it be recharged?ReactantsExamples
Primary cellNo; the reaction cannot be reversed usefullySealed inside, used up onceDry (Leclanché) cell, mercury cell
Secondary cellYes; passing current in reverse restores the reactantsSealed inside, regeneratedLead storage battery, nickel–cadmium cell, lithium-ion cell
Fuel cellNot recharged; refuelled continuouslySupplied from outside (H₂, CH₄, CH₃OH with O₂)H₂–O₂ (Bacon) cell

A useful battery should be light and compact, give a steady voltage, and not lose charge quickly when idle.

8.2 The dry cell (Leclanché cell)

This is the 1.5 V cell in a TV remote or a wall clock.

  • Anode: the zinc container itself.

  • Cathode: a carbon (graphite) rod in the centre, surrounded by powdered MnO₂ and carbon.

  • Electrolyte: a moist paste of NH₄Cl and ZnCl₂ (not a free liquid, hence “dry”).

Anode: Zn(s)→Zn2+(aq)+2e−\text{Anode: } \mathrm{Zn(s) \rightarrow Zn^{2+}(aq) + 2e^{-}}
Cathode: MnO2(s)+NH4+(aq)+e−→MnO(OH)(s)+NH3(g)\text{Cathode: } \mathrm{MnO_2(s) + NH_4^{+}(aq) + e^{-} \rightarrow MnO(OH)(s) + NH_3(g)}

Manganese falls from +4 to +3. The NH₃ formed does not escape as gas; it binds Zn²⁺ as the complex [Zn(NH₃)₄]²⁺. The cell gives about 1.5 V. It is a primary cell, and its voltage drifts down with use because ion concentrations in the paste change. Slow attack of the acidic NH₄Cl on the zinc case limits shelf life.

Mercury cell (for comparison). Used in hearing aids and watches. The anode is zinc–mercury amalgam, the cathode is a paste of HgO and carbon, and the electrolyte is a paste of KOH and ZnO.

Zn(Hg)+HgO(s)→ZnO(s)+Hg(l)\mathrm{Zn(Hg) + HgO(s) \rightarrow ZnO(s) + Hg(l)}

No ion in solution appears in the overall reaction, so the voltage stays at about 1.35 V through the cell's life.

8.3 The lead storage battery (lead accumulator)

This is the battery in a car, an auto-rickshaw or a home inverter.

  • Anode: spongy lead (Pb).

  • Cathode: a lead grid packed with lead dioxide (PbO₂).

  • Electrolyte: about 38% H₂SO₄ by mass.

  • Each cell gives about 2 V; six cells in series give a 12 V battery.

Discharge (working as a galvanic cell):

Anode: Pb(s)+SO42−(aq)→PbSO4(s)+2e−\text{Anode: } \mathrm{Pb(s) + SO_4^{2-}(aq) \rightarrow PbSO_4(s) + 2e^{-}}
Cathode: PbO2(s)+SO42−(aq)+4H+(aq)+2e−→PbSO4(s)+2H2O(l)\text{Cathode: } \mathrm{PbO_2(s) + SO_4^{2-}(aq) + 4H^{+}(aq) + 2e^{-} \rightarrow PbSO_4(s) + 2H_2O(l)}
Overall: Pb(s)+PbO2(s)+2H2SO4(aq)→2PbSO4(s)+2H2O(l)\text{Overall: } \mathrm{Pb(s) + PbO_2(s) + 2H_2SO_4(aq) \rightarrow 2PbSO_4(s) + 2H_2O(l)}

This is a comproportionation: Pb (0) and PbO₂ (+4) both end as PbSO₄ (+2). Two electrons pass per Pb, and two H₂SO₄ are used up. Sulphuric acid is consumed and water forms, so the density of the acid falls. A mechanic checks the state of charge with a hydrometer for this reason.

Charging (working as an electrolytic cell): an external source drives the reverse reaction.

2PbSO4(s)+2H2O(l)→Pb(s)+PbO2(s)+2H2SO4(aq)\mathrm{2PbSO_4(s) + 2H_2O(l) \rightarrow Pb(s) + PbO_2(s) + 2H_2SO_4(aq)}

At the plate joined to the negative terminal, PbSO₄ is reduced back to Pb. At the plate joined to the positive terminal, PbSO₄ is oxidised back to PbO₂. Recharging works because the PbSO₄ stays stuck to the plates instead of floating away.

Figure 8.1 · Lead storage battery: discharge and charge
Figure 8.1 · Lead storage battery: discharge and charge

On discharge both plates turn into PbSO₄ and the acid weakens; charging drives the same half-reactions backwards and restores Pb, PbO₂ and H₂SO₄.

Nickel–cadmium cell (for comparison). A rechargeable cell with a longer life than the lead battery but higher cost. Its overall reaction during discharge is Cd + 2Ni(OH)₃ → CdO + 2Ni(OH)₂ + H₂O, with Cd as the anode.

8.4 Fuel cells

A thermal power plant burns fuel to boil water, turns a turbine and then a generator. Each step wastes energy, and the overall efficiency is about 40%. A fuel cell skips the heat stage. It turns the chemical energy of a fuel directly into electricity.

The H₂–O₂ fuel cell (Bacon cell, used in the Apollo space programme):

  • Porous carbon electrodes containing finely divided Pt or Pd as catalyst.

  • Concentrated aqueous KOH (or NaOH) as electrolyte.

  • H₂ bubbled in at the anode, O₂ at the cathode.

Anode: 2H2(g)+4OH−(aq)→4H2O(l)+4e−\text{Anode: } \mathrm{2H_2(g) + 4OH^{-}(aq) \rightarrow 4H_2O(l) + 4e^{-}}
Cathode: O2(g)+2H2O(l)+4e−→4OH−(aq)\text{Cathode: } \mathrm{O_2(g) + 2H_2O(l) + 4e^{-} \rightarrow 4OH^{-}(aq)}
Overall: 2H2(g)+O2(g)→2H2O(l)E∘=1.23 V\text{Overall: } \mathrm{2H_2(g) + O_2(g) \rightarrow 2H_2O(l)} \qquad E^{\circ} = 1.23\ \text{V}

The only product is water, which the astronauts drank. Real fuel cells reach about 70% efficiency. The theoretical upper limit is ΔG°/ΔH°:

ηmax=ΔG∘ΔH∘=−237.4 kJ mol−1−285.8 kJ mol−1≈0.83\eta_{\text{max}} = \frac{\Delta G^{\circ}}{\Delta H^{\circ}} = \frac{-237.4\ \text{kJ mol}^{-1}}{-285.8\ \text{kJ mol}^{-1}} \approx 0.83

Fuel cells are quiet and clean, and they run as long as fuel flows. Their drawbacks are cost (platinum catalyst) and the difficulty of storing hydrogen.

Figure 8.2 · The H₂–O₂ fuel cell
Figure 8.2 · The H₂–O₂ fuel cell

OH⁻ ions made at the cathode cross the KOH to the anode, where they oxidise H₂ to water and release electrons that run the load.

8.5 The three cells side by side

FeatureDry cellLead storage batteryH₂–O₂ fuel cell
TypePrimarySecondaryFuel cell
AnodeZn containerPbPorous C with H₂
CathodeC rod in MnO₂PbO₂ on Pb gridPorous C with O₂
ElectrolyteNH₄Cl + ZnCl₂ pasteAbout 38% H₂SO₄Concentrated KOH
VoltageAbout 1.5 VAbout 2 V per cell1.23 V (standard)
Key productMnO(OH), [Zn(NH₃)₄]²⁺PbSO₄ on both platesWater

Worked examples

Worked example 8.1: Which species is reduced in a dry cell, and what is the change in oxidation number?

Solution: MnO₂ is reduced to MnO(OH). Mn goes from +4 to +3, a change of one per Mn.

Worked example 8.2: Write the overall discharge reaction of the lead storage battery and state n.

Solution: Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O. Pb loses 2 electrons and PbO₂ gains 2, so n = 2.

Worked example 8.3: How many moles of H₂SO₄ are used when 1 F of charge is drawn from a lead battery?

Solution: The overall reaction uses 2 mol H₂SO₄ per 2 F. So 1 F uses 1 mol H₂SO₄.

Worked example 8.4: Find the total mass of PbSO₄ formed on both plates when 0.1 F is drawn (PbSO₄ = 303 g mol⁻¹).

Solution: 2 F form 2 mol PbSO₄ (one at each plate). So 0.1 F forms 0.1 mol, which is 0.1 × 303 = 30.3 g.

Worked example 8.5: Using ΔG°f of H₂O(l) = −237.2 kJ mol⁻¹, find E° of the H₂–O₂ fuel cell.

Solution: For H₂ + ½O₂ → H₂O, n = 2. E° = −ΔG°/nF = 237200/(2 × 96500) = 1.23 V.

Worked example 8.6: Find the maximum efficiency of the H₂–O₂ fuel cell if ΔH° = −285.8 kJ mol⁻¹ and ΔG° = −237.4 kJ mol⁻¹.

Solution: η = 237.4/285.8 = 0.83, or 83%.

Worked example 8.7: Why does the mercury cell keep a constant voltage while the dry cell voltage drifts?

Solution: In the mercury cell's overall reaction, Zn(Hg) + HgO → ZnO + Hg, every species is a solid or a liquid. Q stays 1, so by the Nernst equation E stays equal to E°. In the dry cell, NH₄⁺ and Zn²⁺ concentrations change as it works.

Worked example 8.8 (NEET-hard): A H₂–O₂ fuel cell delivers 1.0 A for 1 hour. Find the mass of H₂ consumed (H₂ = 2 g mol⁻¹).

Solution: Q = 1.0 × 3600 = 3600 C = 3600/96500 = 0.0373 F. Each H₂ gives 2 electrons, so moles of H₂ = 0.0373/2 = 0.01865 mol. Mass = 0.01865 × 2 = 0.0373 g.

Quick revision

  • Primary: dry cell, mercury cell. Secondary: lead storage, Ni–Cd, Li-ion. Fuel cell: fed from outside.

  • Dry cell: Zn anode; C rod with MnO₂ cathode; NH₄Cl + ZnCl₂ paste; about 1.5 V.

  • Dry cell cathode: MnO₂ + NH₄⁺ + e⁻ → MnO(OH) + NH₃.

  • Lead battery: Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O; n = 2; acid density falls on discharge.

  • Charging a lead battery makes it an electrolytic cell.

  • H₂–O₂ fuel cell: KOH electrolyte, Pt catalyst, product water, E° = 1.23 V, practical efficiency about 70%.

  • Mercury cell voltage is constant because no ions appear in its overall reaction.

NEET traps

  • Calling the carbon rod the anode of a dry cell. Zinc is the anode.

  • Writing PbO₂ as the anode of the lead battery. PbO₂ is the cathode during discharge.

  • Saying acid density rises on discharge. Acid is used up and water forms, so it falls.

  • Forgetting that PbSO₄ forms at both plates.

  • Calling a fuel cell a secondary battery. It is not recharged; it is refuelled.

  • Writing H⁺ in the alkaline fuel cell half-reactions. Use OH⁻ and H₂O.

Practice MCQs: Chapter 8

Level 1: Concept check

1. In a dry cell, the anode is (a) the zinc container (b) the carbon rod (c) MnO₂ (d) the NH₄Cl paste

2. The lead storage battery is an example of a (a) primary cell (b) fuel cell (c) secondary cell (d) concentration cell

3. The electrolyte in a lead storage battery is (a) KOH solution (b) about 38% H₂SO₄ (c) NH₄Cl paste (d) HCl solution

4. A fuel cell converts (a) heat into electricity (b) electrical energy into chemical energy (c) light into electricity (d) the chemical energy of a fuel directly into electrical energy

5. The electrolyte in the H₂–O₂ (Bacon) fuel cell is (a) concentrated aqueous KOH (b) dilute H₂SO₄ (c) molten NaCl (d) NH₄Cl paste

6. The voltage of a fresh dry cell is about (a) 2.0 V (b) 1.5 V (c) 1.23 V (d) 12 V

7. In a dry cell, the cathode is (a) zinc (b) PbO₂ (c) a carbon rod surrounded by MnO₂ and carbon (d) HgO

8. During discharge of a lead storage battery, the substance formed at both electrodes is (a) Pb (b) PbO₂ (c) H₂SO₄ (d) PbSO₄

9. The product of the H₂–O₂ fuel cell is (a) H₂O₂ (b) H₂O (c) KOH (d) O₃

10. Which of the following is a primary cell? (a) Lead storage battery (b) Nickel–cadmium cell (c) Leclanché dry cell (d) Lithium-ion cell

Level 2: NEET standard

11. The cathode reaction in a dry cell is (a) Zn → Zn²⁺ + 2e⁻ (b) MnO₂ + NH₄⁺ + e⁻ → MnO(OH) + NH₃ (c) PbO₂ + 4H⁺ + 2e⁻ → Pb²⁺ + 2H₂O (d) HgO + H₂O + 2e⁻ → Hg + 2OH⁻

12. The overall discharge reaction of the lead storage battery is (a) Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O (b) 2PbSO₄ + 2H₂O → Pb + PbO₂ + 2H₂SO₄ (c) Pb + H₂SO₄ → PbSO₄ + H₂ (d) PbO₂ + H₂ → Pb + 2H₂O

13. As a lead storage battery discharges, the density of its electrolyte (a) increases (b) stays the same (c) first rises, then falls (d) decreases

14. While a lead storage battery is being charged, at the plate joined to the negative terminal, (a) Pb is oxidised to PbSO₄ (b) PbSO₄ is oxidised to PbO₂ (c) PbSO₄ is reduced to Pb (d) O₂ is evolved

15. The mercury cell gives a nearly constant voltage because (a) no ions in solution appear in its overall reaction (b) mercury is a liquid metal (c) it uses KOH (d) it is rechargeable

16. The anode reaction in the alkaline H₂–O₂ fuel cell is (a) O₂ + 2H₂O + 4e⁻ → 4OH⁻ (b) H₂ + 2OH⁻ → 2H₂O + 2e⁻ (c) 2H⁺ + 2e⁻ → H₂ (d) H₂O → H₂ + ½O₂

17. The catalyst used on the electrodes of the H₂–O₂ fuel cell is (a) MnO₂ (b) iron oxide (c) V₂O₅ (d) finely divided Pt or Pd

18. The number of electrons transferred in the overall discharge reaction of a lead storage battery is (a) 1 (b) 4 (c) 2 (d) 6

19. The practical efficiency of a fuel cell compared with a thermal power plant is roughly (a) 40% versus 70% (b) 70% versus 40% (c) 100% versus 40% (d) equal

20. A 12 V car battery contains how many lead–acid cells in series? (a) 6 (b) 12 (c) 4 (d) 2

21. In a dry cell, the NH₃ formed at the cathode (a) escapes as gas and bursts the cell (b) reduces MnO₂ again (c) reacts with zinc metal to give H₂ (d) combines with Zn²⁺ to form [Zn(NH₃)₄]²⁺

22. The standard emf of the H₂–O₂ fuel cell is (a) 1.10 V (b) 2.0 V (c) 1.23 V (d) 0.83 V

Level 3: Challenge

23. The number of moles of H₂SO₄ used up when 0.5 F is drawn from a lead storage battery is (a) 0.25 (b) 1.0 (c) 0.5 (d) 2.0

24. When 0.1 F is drawn from a lead storage battery, the total mass of PbSO₄ (303 g mol⁻¹) formed on both plates is (a) 15.15 g (b) 30.3 g (c) 60.6 g (d) 3.03 g

25. For H₂(g) + ½O₂(g) → H₂O(l), ΔG° = −237 kJ mol⁻¹ and ΔH° = −286 kJ mol⁻¹. The maximum (thermodynamic) efficiency of the H₂–O₂ fuel cell is about (a) 83% (b) 40% (c) 100% (d) 121%

26. A H₂–O₂ fuel cell delivers 1.0 A for 1 hour. The mass of H₂ (2 g mol⁻¹) used is about (a) 0.0187 g (b) 0.0746 g (c) 3.73 g (d) 0.0373 g

27. In a nickel–cadmium cell, Cd + 2Ni(OH)₃ → CdO + 2Ni(OH)₂ + H₂O during discharge. The anode is (a) Ni(OH)₃ (b) Cd (c) CdO (d) Ni(OH)₂

28. A methane fuel cell runs on CH₄ + 2O₂ → CO₂ + 2H₂O, with ΔG° = −818 kJ mol⁻¹ and 8 electrons transferred. Its E° is about (a) 4.24 V (b) 2.12 V (c) 1.06 V (d) 0.53 V

29. Assertion (A): A Leclanché dry cell can be recharged many times. Reason (R): In a dry cell, zinc acts as the anode. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The overall reaction in the H₂–O₂ fuel cell is 2H₂ + O₂ → 2H₂O. Statement II: Like a storage battery, a fuel cell must be recharged from an outside source after use. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1aZinc case is oxidised
2cIt can be recharged
3bAbout 38% H₂SO₄
4dNo heat stage in between
5aConcentrated KOH
6bAbout 1.5 V
7cGraphite rod in MnO₂ + C
8dBoth plates end as PbSO₄
9b2H₂ + O₂ → 2H₂O
10cDry cell cannot be recharged
11bMn +4 → +3
12aPb and PbO₂ both give PbSO₄
13dH₂SO₄ used, water formed
14cReduction at the negative plate
15aQ stays 1
16bH₂ is oxidised using OH⁻
17dPt or Pd catalyst
18cPb 0 → +2 and Pb +4 → +2
19bDirect conversion avoids heat losses
20a6 × 2 V
21dAmmine complex of Zn²⁺
22cE° = 1.23 V
23c1 mol H₂SO₄ per faraday
24b0.1 mol PbSO₄ in total
25a237/286 = 0.83
26d0.0373 F ÷ 2 = 0.0187 mol, × 2 g
27bCd is oxidised to CdO
28c818000/(8 × 96500)
29dDry cell is primary; R is true
30cFuel cells are refuelled, not recharged

Chapter 8 revision sheet

One-page summary

  • Primary cells cannot be recharged (dry cell, mercury cell). Secondary cells can be recharged by passing current in the reverse direction (lead storage, Ni–Cd).

  • Dry (Leclanché) cell: zinc container anode; graphite rod in MnO₂ + carbon as cathode; moist paste of NH₄Cl and ZnCl₂; about 1.5 V.

  • Dry cell reactions: Zn → Zn²⁺ + 2e⁻; MnO₂ + NH₄⁺ + e⁻ → MnO(OH) + NH₃. Mn goes from +4 to +3. NH₃ binds Zn²⁺ as [Zn(NH₃)₄]²⁺.

  • Mercury cell: Zn–Hg amalgam anode, HgO + carbon cathode, KOH–ZnO paste; overall Zn(Hg) + HgO → ZnO + Hg; about 1.35 V, constant through its life because no ion concentration changes.

  • Lead storage battery: Pb anode, PbO₂ cathode, about 38% H₂SO₄; overall Pb + PbO₂ + 2H₂SO₄ → 2PbSO₄ + 2H₂O (n = 2); about 2 V per cell, six cells in a 12 V car battery.

  • On discharge PbSO₄ forms at both plates and acid density falls; on charging the reaction reverses.

  • Ni–Cd cell: rechargeable, longer life than lead storage, but costlier.

  • Fuel cell: reactants (H₂ and O₂) are fed continuously; chemical energy goes directly into electrical energy.

  • H₂–O₂ fuel cell (Apollo): porous carbon electrodes with Pt or Pd catalyst, concentrated KOH; anode 2H₂ + 4OH⁻ → 4H₂O + 4e⁻; cathode O₂ + 2H₂O + 4e⁻ → 4OH⁻; overall 2H₂ + O₂ → 2H₂O.

  • Efficiency of a fuel cell η = ΔG/ΔH, often about 70% in practice, against about 40% for thermal power plants. The product, water, is non-polluting.

η=ΔGΔH,E∘=−ΔG∘nF\eta = \frac{\Delta G}{\Delta H}, \qquad E^\circ = \frac{-\Delta G^\circ}{nF}

Must-remember table

CellAnodeCathodeElectrolyteVoltage
Dry (Leclanché)Zn containerMnO₂ + C (graphite rod)NH₄Cl + ZnCl₂ pasteabout 1.5 V
MercuryZn–Hg amalgamHgO + CKOH + ZnO paste1.35 V, constant
Lead storagePbPbO₂ on Pb gridabout 38% H₂SO₄about 2 V per cell
Ni–CdCdNickel oxide-hydroxideKOHabout 1.2 V
H₂–O₂ fuel cellH₂ on porous C (Pt)O₂ on porous C (Pt)Concentrated KOH1.23 V (ideal)

Memory aids

  • "Zinc is the can, carbon is the core": in a dry cell the Zn can is the anode and the central graphite rod collects current at the cathode.

  • "Mercury stays steady": no ion concentration changes in the mercury cell, so its voltage does not sag.

  • "Lead goes to sulphate on both sides": on discharge both Pb and PbO₂ end as PbSO₄, and the acid gets weaker.

  • "Fuel cells never run out, they run on": reactants are fed in continuously, like fuel in an auto-rickshaw.

Concept connections

  • ΔG, ΔH and efficiency come from Chemistry Book 4: Chemical Thermodynamics.

  • Oxidation states of Mn, Pb and Hg in these cells link back to Chapter 1 and to Chemistry Book 11: d- and f-Block Elements and Chemistry Book 10: p-Block Elements.

  • Emf, internal resistance and cells in series are covered in Physics Book 12: Current Electricity.

Practice MCQs: Chapter 8, Level 4 (new NEET pattern)

31. Match List I (cell) with List II (electrolyte).

List I: A. Dry cell   B. Mercury cell   C. Lead storage battery   D. H₂–O₂ fuel cell

List II: (i) Paste of KOH and ZnO   (ii) H₂SO₄ (about 38%)   (iii) Concentrated aqueous KOH   (iv) Paste of NH₄Cl and ZnCl₂

(a) A-iv, B-iii, C-ii, D-i (b) A-iv, B-i, C-ii, D-iii (c) A-i, B-iv, C-ii, D-iii (d) A-iv, B-i, C-iii, D-ii

32. Match List I (cell) with List II (substance reduced at the cathode).

List I: A. Dry cell   B. Mercury cell   C. Lead storage battery (discharge)   D. H₂–O₂ fuel cell

List II: (i) PbO₂   (ii) O₂   (iii) MnO₂   (iv) HgO

(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

33. Match List I (cell) with List II (typical voltage).

List I: A. Dry cell   B. Mercury cell   C. One cell of a lead storage battery   D. H₂–O₂ fuel cell (ideal, standard)

List II: (i) 1.23 V   (ii) 2.0 V   (iii) 1.5 V   (iv) 1.35 V

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iii, B-i, C-ii, D-iv (d) A-ii, B-iv, C-iii, D-i

34. Match List I (property) with List II (cell).

List I: A. Cannot be recharged; voltage falls with use   B. Recharged by reversing the cell reaction   C. Reactants fed in continuously   D. Voltage nearly constant throughout its life

List II: (i) Mercury cell   (ii) H₂–O₂ fuel cell   (iii) Lead storage battery   (iv) Leclanché cell

(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-i, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-i, B-iii, C-ii, D-iv

35. How many of the following statements are correct?

A. In a dry cell, the zinc container is the anode.

B. At the cathode of a dry cell, Mn goes from +4 to +3.

C. In a lead storage battery, PbSO₄ forms at both electrodes during discharge.

D. The density of H₂SO₄ in a lead storage battery rises during discharge.

E. The product of an H₂–O₂ fuel cell is water.

(a) 3 (b) 4 (c) 5 (d) 2

36. Choose the correct set of statements.

A. Fuel cells convert chemical energy directly into electrical energy.

B. The efficiency of an H₂–O₂ fuel cell can exceed that of a thermal power plant.

C. The Pt catalyst is used up in the cell reaction.

D. Ni–Cd cells have a longer life than lead storage cells but cost more.

(a) A and B only (b) B, C and D only (c) A, B, C and D (d) A, B and D only

37. How many of the following statements about the lead storage battery are correct?

A. The anode is lead.

B. The cathode is a lead grid packed with PbO₂.

C. On charging, PbSO₄ on the negative plate is reduced back to Pb.

D. Each cell gives about 12 V.

E. The overall discharge uses 1 mol H₂SO₄ for every 2 mol of electrons.

(a) 2 (b) 4 (c) 3 (d) 5

38. Choose the correct set of statements about the dry cell.

A. NH₃ formed at the cathode combines with Zn²⁺ to form [Zn(NH₃)₄]²⁺.

B. It can be recharged many times.

C. The graphite rod collects current at the cathode.

D. The electrolyte is a moist paste, not a dry solid.

(a) A, C and D only (b) A and B only (c) B, C and D only (d) A, B, C and D

39. A graph of terminal voltage (y-axis) against time of use (x-axis) shows two cells. Curve P stays flat at about 1.35 V for most of its life and then drops sharply. Curve Q starts at about 1.5 V and falls steadily. P and Q are most likely

(a) P = dry cell, Q = mercury cell (b) P = mercury cell, Q = dry cell (c) P = lead storage cell, Q = fuel cell (d) P = fuel cell, Q = mercury cell

40. The table gives data for a methanol fuel cell at 298 K: CH₃OH(l) + 3/2 O₂(g) → CO₂(g) + 2H₂O(l).

QuantityValue (kJ mol⁻¹)
ΔG°−702
ΔH°−726

The maximum (thermodynamic) efficiency of this cell is about

(a) 83% (b) 103% (c) 97% (d) 70%

41. A mechanic checks a car battery with a hydrometer.

ConditionSpecific gravity of acid
Fully charged (from the manual)1.28
Reading today1.15

The correct conclusion is

(a) The battery is largely discharged, as H₂SO₄ has been used up to form PbSO₄ and water (b) The battery is overcharged (c) Acid density rises on discharge, so the battery is fully charged (d) Water has been turned into H₂SO₄ during use

Case for Q42–43: An H₂–O₂ fuel cell on a satellite supplies a steady current of 10 A for 1930 s. The overall reaction is 2H₂ + O₂ → 2H₂O, with 4 electrons per O₂. Take F = 96500 C mol⁻¹, H = 1, O = 16.

42. The mass of H₂ consumed is

(a) 0.1 g (b) 0.4 g (c) 2.0 g (d) 0.2 g

43. The mass of water produced is

(a) 0.9 g (b) 1.8 g (c) 3.6 g (d) 18 g

44. Using the data in Q40 (n = 6 for the methanol fuel cell), E° of the cell is about

(a) 1.21 V (b) 1.25 V (c) 2.42 V (d) 0.61 V

45. A lead storage battery delivers 2 F of charge. The mass of H₂SO₄ consumed is (H₂SO₄ = 98 g mol⁻¹)

(a) 98 g (b) 392 g (c) 196 g (d) 49 g

Level 4 answer key

QAnsReason
31bDry NH₄Cl/ZnCl₂; mercury KOH/ZnO; lead H₂SO₄; fuel cell KOH
32dMnO₂, HgO, PbO₂ and O₂ are the cathode reactants
33a1.5, 1.35, 2.0 and 1.23 V
34cLeclanché primary; lead secondary; fuel cell fed continuously; mercury constant
35bOnly D is false; acid is used up, so density falls
36dA catalyst is not consumed
37cA, B, C true; each cell is about 2 V; 2 mol H₂SO₄ per 2 mol electrons
38aA dry cell is a primary cell
39bMercury cell voltage is flat; dry cell voltage sags
40cη = 702/726 = 0.967
41aAcid density falls as H₂SO₄ forms PbSO₄ and water
42dQ = 19300 C = 0.2 F; H₂ = 0.1 mol = 0.2 g
43b0.2 F gives 0.1 mol H₂O = 1.8 g
44aE° = 702000/(6 × 96500) = 1.21 V
45c2 mol H₂SO₄ per 2 F = 196 g
22 min left
‹
›