Chapter 4: Nernst Equation, EMF and Gibbs Energy
The Nernst equation tells you how a cell's voltage changes when concentrations move away from 1 M. Set E = 0 and it gives the equilibrium constant; multiply E° by −nF and it gives ΔG°. Almost every numerical in this unit uses one of these three links.
What you will learn
How the Nernst equation follows from ΔG = ΔG° + RT ln Q.
How to apply it to a single electrode and to a full cell.
How E°cell is linked to K and to ΔG°.
How concentration cells work and how a hydrogen electrode measures pH.
How to combine two half-cell potentials into a third one using ΔG°.
4.1 Deriving the Nernst equation
From thermodynamics, the Gibbs energy change at any composition is:
Here Q is the reaction quotient. For a cell, the electrical work done when n moles of electrons move through a potential E is nFE. The maximum useful work equals the fall in Gibbs energy:
Substitute both into the first equation:
Divide by −nF:
Convert ln to log (ln x = 2.303 log x) and put T = 298 K, R = 8.314 J K⁻¹ mol⁻¹, F = 96500 C mol⁻¹. Then 2.303RT/F = 0.059 V.
This is the Nernst equation. In Q, pure solids and liquids count as 1, solutes enter as molar concentration and gases as partial pressure in bar.
4.2 Nernst equation for a single electrode
For a metal electrode, Mⁿ⁺(aq) + ne⁻ → M(s), Q = 1/[Mⁿ⁺]:
A more dilute solution makes the reduction potential less positive. Think of it like a crowded Mumbai local: fewer ions waiting at the electrode means a weaker push to deposit.
Hydrogen electrode and pH. For 2H⁺ + 2e⁻ → H₂:
At p(H₂) = 1 bar this becomes E = 0.059 log[H⁺], that is:
So a hydrogen electrode in a solution of pH 4 has E = −0.236 V.
4.3 Nernst equation for a cell
For the general cell reaction aA + bB → cC + dD with n electrons transferred:
For the Daniell cell, Zn + Cu²⁺ → Zn²⁺ + Cu, n = 2:
Raising [Cu²⁺] (a reactant) or lowering [Zn²⁺] (a product) raises Ecell. If both are equal, at any value, Ecell = E°cell = 1.10 V.
As a cell runs, Q grows and Ecell falls. When Ecell reaches zero, the cell is “dead”: the reaction has reached equilibrium.
4.4 E°cell, equilibrium constant and Gibbs energy
At equilibrium, E = 0 and Q = K. The Nernst equation gives:
The three quantities are tied together:
| E°cell | ΔG° | K | Reaction under standard conditions |
|---|---|---|---|
| Positive | Negative | Greater than 1 | Spontaneous forward |
| Zero | Zero | Equal to 1 | At equilibrium |
| Negative | Positive | Less than 1 | Spontaneous in reverse |
For the Daniell cell, log K = 2 × 1.10/0.059 = 37.3, so K is about 2 × 10³⁷. The reaction goes essentially to completion.
Intensive vs extensive. E° is intensive. ΔG° is extensive, because n doubles when you double the equation. So you may add ΔG° values, but not E° values, when you add two half-reactions to get a third half-reaction.
Combining half-cell potentials. Find E°(Fe³⁺/Fe) from E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(Fe²⁺/Fe) = −0.44 V.
The general rule is E°₃ = (n₁E°₁ + n₂E°₂)/n₃. When two half-cells add to give a full cell (electrons cancel), you simply subtract E° values as in Chapter 3.
4.5 Concentration cells
A concentration cell uses the same electrode couple on both sides, at different concentrations. E°cell = 0, so the whole emf comes from the concentration difference.
For M | Mⁿ⁺(c₁) || Mⁿ⁺(c₂) | M with c₂ greater than c₁:
The electrode in the dilute solution is the anode: metal dissolves there and raises c₁. The electrode in the concentrated solution is the cathode: ions deposit there and lower c₂. The cell runs until c₁ = c₂, and then E = 0.
A gas concentration cell works the same way. For two hydrogen electrodes at the same [H⁺] but different H₂ pressures, the electrode at higher pressure is the anode.
4.6 Uses of the Nernst equation
Calculating the emf of any cell at non-standard concentrations.
Finding an unknown concentration, or the pH of a solution, from a measured emf.
Finding K and ΔG° from E°cell.
Predicting how a cell's emf changes as it discharges.
Worked examples
Worked example 4.1: Find the electrode potential of Zn²⁺/Zn when [Zn²⁺] = 0.01 M.
Solution: E = −0.76 − (0.059/2) log(1/0.01) = −0.76 − 0.0295 × 2 = −0.819 V.
Worked example 4.2: Find Ecell for Zn | Zn²⁺(0.1 M) || Cu²⁺(0.001 M) | Cu.
Solution: Q = 0.1/0.001 = 100, log Q = 2. Ecell = 1.10 − 0.0295 × 2 = 1.041 V.
Worked example 4.3: Find Ecell for Mg | Mg²⁺(0.001 M) || Cu²⁺(0.0001 M) | Cu.
Solution: E°cell = 0.34 − (−2.36) = 2.70 V. Q = 0.001/0.0001 = 10. Ecell = 2.70 − 0.0295 × 1 = 2.67 V.
Worked example 4.4: Calculate ΔG° and K for the Daniell cell.
Solution: ΔG° = −2 × 96500 × 1.10 = −212300 J mol⁻¹ = −212.3 kJ mol⁻¹. log K = 2 × 1.10/0.059 = 37.29, so K = 1.9 × 10³⁷.
Worked example 4.5: A hydrogen electrode (p(H₂) = 1 bar) dipped in a solution is joined to the SHE. The emf is 0.177 V, and the SHE is the cathode. Find the pH.
Solution: Ecell = 0 − E(test) = 0.059 pH. So pH = 0.177/0.059 = 3.
Worked example 4.6: Find the emf of Ag | Ag⁺(0.01 M) || Ag⁺(0.1 M) | Ag.
Solution: It is a concentration cell with n = 1. E = 0.059 log(0.1/0.01) = 0.059 V. The left electrode (dilute side) is the anode.
Worked example 4.7: Using E°(Cu²⁺/Cu) = +0.34 V and E°(Cu⁺/Cu) = +0.52 V, find E°(Cu²⁺/Cu⁺).
Solution: Cu²⁺ + 2e⁻ → Cu (n = 2) equals Cu²⁺ + e⁻ → Cu⁺ (n = 1) plus Cu⁺ + e⁻ → Cu (n = 1). So 2(0.34) = 1 × E° + 1(0.52), giving E°(Cu²⁺/Cu⁺) = 0.16 V. Since 0.52 is greater than 0.16, Cu⁺ disproportionates in water (2Cu⁺ → Cu²⁺ + Cu, E° = +0.36 V).
Worked example 4.8: Find Ecell for Zn | Zn²⁺(0.1 M) || Ag⁺(0.01 M) | Ag.
Solution: Reaction: Zn + 2Ag⁺ → Zn²⁺ + 2Ag, n = 2, E° = 1.56 V. Q = [Zn²⁺]/[Ag⁺]² = 0.1/(0.01)² = 1000. Ecell = 1.56 − 0.0295 × 3 = 1.47 V. Note the square on [Ag⁺].
Worked example 4.9 (NEET-hard): A reaction A(s) + B²⁺(aq) → A²⁺(aq) + B(s) has K = 1 × 10²⁰ at 298 K. Find E°cell and ΔG°.
Solution: E° = (0.059/n) log K = (0.059/2) × 20 = 0.59 V. ΔG° = −nFE° = −2 × 96500 × 0.59 = −113870 J, about −113.9 kJ mol⁻¹.
Quick revision
E = E° − (0.059/n) log Q at 298 K; solids and liquids count as 1.
Electrode: E = E° − (0.059/n) log(1/[Mⁿ⁺]). Hydrogen electrode at 1 bar: E = −0.059 pH.
At equilibrium E = 0 and log K = nE°/0.059.
ΔG° = −nFE° = −2.303RT log K.
E° positive, ΔG° negative and K greater than 1 all mean the same thing.
Concentration cell: E° = 0, E = (0.059/n) log(c₂/c₁); dilute side is the anode.
To get a new half-cell E°, add n × E° values, then divide by the new n.
NEET traps
Forgetting to raise concentrations to their coefficients, such as [Ag⁺]².
Putting reactants on top in Q. Q is always products over reactants.
Using n = 1 for the Daniell cell. Two electrons move per Zn.
Adding E° values directly to get E°(Fe³⁺/Fe). Go through n × E°.
Writing ΔG° in J and comparing it with an option in kJ.
Calling the concentrated side the anode in a concentration cell.
Practice MCQs: Chapter 4
Level 1: Concept check
1. The Nernst equation relates the electrode potential to (a) temperature only (b) the concentrations of the species involved (c) the size of the electrode (d) the volume of the solution
2. When a cell reaction reaches equilibrium, Ecell equals (a) E°cell (b) 1 V (c) zero (d) 0.059 V
3. The standard Gibbs energy change of a cell reaction is related to E°cell by (a) ΔG° = nFE° (b) ΔG° = −E°/nF (c) ΔG° = nF/E° (d) ΔG° = −nFE°
4. For a spontaneous cell reaction, (a) Ecell is positive and ΔG is negative (b) Ecell is negative and ΔG is positive (c) both are positive (d) both are negative
5. The standard emf of a concentration cell is (a) 0.059 V (b) zero (c) 1.10 V (d) equal to E° of the electrode used
6. At 298 K, the value of 2.303RT/F is about (a) 8.314 V (b) 0.0295 V (c) 96500 V (d) 0.059 V
7. The equilibrium constant of a cell reaction at 298 K is given by (a) log K = nE°/0.059 (b) log K = 0.059/nE° (c) K = nE° (d) log K = −nE°/0.059
8. If E°cell for a reaction is negative, its equilibrium constant K is (a) greater than 1 (b) less than 1 (c) equal to 1 (d) zero
9. In the reaction quotient Q, the concentration of a pure solid is taken as (a) zero (b) its density (c) 1 (d) its molar mass
10. A concentration cell produces an emf because (a) the two electrodes are made of different metals (b) E°cell is large (c) heat is supplied (d) the same ion is at different concentrations in the two half-cells
Level 2: NEET standard
11. The electrode potential of Cu²⁺/Cu (E° = +0.34 V) in 0.01 M Cu²⁺ is (a) 0.281 V (b) 0.399 V (c) 0.340 V (d) 0.310 V
12. Ecell for Zn | Zn²⁺(0.01 M) || Cu²⁺(1 M) | Cu (E° = 1.10 V) is (a) 1.041 V (b) 1.100 V (c) 1.159 V (d) 1.218 V
13. ΔG° for the Daniell cell reaction (E° = 1.10 V) is (a) −106.2 kJ (b) −212.3 kJ (c) −424.6 kJ (d) +212.3 kJ
14. The potential of a hydrogen electrode (p(H₂) = 1 bar) dipped in a solution of pH 4 is (a) +0.236 V (b) −0.059 V (c) −0.118 V (d) −0.236 V
15. For a two-electron cell reaction, E°cell = 0.295 V. Its equilibrium constant is (a) 10⁵ (b) 10¹⁰ (c) 10²⁰ (d) 10²·⁹⁵
16. The emf of Cu | Cu²⁺(0.001 M) || Cu²⁺(0.1 M) | Cu is (a) 0.118 V (b) 0.0295 V (c) 0.059 V (d) zero
17. Given E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(Fe²⁺/Fe) = −0.44 V, E°(Fe³⁺/Fe) is (a) −0.037 V (b) +0.33 V (c) +0.11 V (d) −1.21 V
18. A two-electron cell reaction has ΔG° = −96.5 kJ mol⁻¹. Its E°cell is (a) 1.00 V (b) 0.25 V (c) 2.00 V (d) 0.50 V
19. The electrode potential of Ag⁺/Ag (E° = +0.80 V) in 0.001 M Ag⁺ is (a) 0.977 V (b) 0.623 V (c) 0.741 V (d) 0.800 V
20. The emf of a Daniell cell can be increased by (a) increasing [Zn²⁺] (b) decreasing [Cu²⁺] (c) increasing [Cu²⁺] (d) using a larger zinc rod
21. A hydrogen electrode (1 bar) in a test solution has a potential of −0.177 V. The pH of the solution is (a) 1 (b) 2 (c) 0.177 (d) 3
22. At 298 K, a Daniell cell stops giving current when the ratio [Zn²⁺]/[Cu²⁺] becomes about (a) 10³⁷·³ (b) 10¹⁸·⁶ (c) 1 (d) 10⁻³⁷·³
Level 3: Challenge
23. For Pt | H₂(1 bar) | H⁺(pH = x) || H⁺(1 M) | H₂(1 bar) | Pt, the emf is 0.118 V. The value of x is (a) 1 (b) 2 (c) 3 (d) 4
24. Ecell for Zn | Zn²⁺(0.1 M) || Ag⁺(0.01 M) | Ag (E°cell = 1.56 V) is (a) 1.47 V (b) 1.53 V (c) 1.62 V (d) 1.50 V
25. For a two-electron reaction with E°cell = 0.0295 V at 298 K, K equals (a) 1 (b) 100 (c) 10 (d) 0.1
26. For Cu + 2Ag⁺ → Cu²⁺ + 2Ag, E°cell = 0.46 V. ΔG° is (a) −44.4 kJ (b) +88.8 kJ (c) −177.6 kJ (d) −88.8 kJ
27. Given E°(Cu²⁺/Cu) = +0.34 V and E°(Cu⁺/Cu) = +0.52 V, E°(Cu²⁺/Cu⁺) is (a) +0.16 V (b) +0.86 V (c) +0.18 V (d) +0.43 V
28. A Daniell cell is made with [Zn²⁺] = [Cu²⁺] = 0.5 M. Its emf at 298 K is (a) 1.07 V (b) 1.13 V (c) 1.10 V (d) 0.55 V
29. Assertion (A): E°cell is an intensive property, but ΔG° of the cell reaction is extensive. Reason (R): ΔG° = −nFE°, and n changes when the balanced equation is multiplied. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: For any concentration cell, E°cell is zero. Statement II: In an electrolyte concentration cell, the electrode dipped in the more dilute solution acts as the cathode. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | E depends on log of concentrations |
| 2 | c | No net driving force at equilibrium |
| 3 | d | ΔG° = −nFE° |
| 4 | a | Positive E gives negative ΔG |
| 5 | b | Same couple on both sides |
| 6 | d | 2.303 × 8.314 × 298/96500 ≈ 0.059 V |
| 7 | a | Set E = 0 in the Nernst equation |
| 8 | b | log K is negative |
| 9 | c | Activity of a pure solid is 1 |
| 10 | d | E° = 0; only concentration differs |
| 11 | a | 0.34 − 0.0295 × 2 |
| 12 | c | 1.10 − 0.0295 log(0.01) = 1.159 V |
| 13 | b | −2 × 96500 × 1.10 J |
| 14 | d | −0.059 × 4 |
| 15 | b | log K = 2 × 0.295/0.059 = 10 |
| 16 | c | (0.059/2) log 100 |
| 17 | a | (0.77 − 0.88)/3 |
| 18 | d | 96500/(2 × 96500) |
| 19 | b | 0.80 − 0.059 × 3 |
| 20 | c | Reactant concentration up, log Q down |
| 21 | d | 0.177/0.059 = 3 |
| 22 | a | log ratio = 1.10/0.0295 = 37.3 |
| 23 | b | 0.059x = 0.118 |
| 24 | a | Q = 0.1/(0.01)² = 1000; 1.56 − 0.0885 |
| 25 | c | log K = 2 × 0.0295/0.059 = 1 |
| 26 | d | −2 × 96500 × 0.46 = −88.8 kJ |
| 27 | a | 2(0.34) − 0.52 = 0.16 |
| 28 | c | Q = 1, so E = E° |
| 29 | a | n doubles with the equation, E° does not |
| 30 | c | The dilute side is the anode, so II is false |
Chapter 4 revision sheet
One-page summary
The emf of a cell is the potential difference between the electrodes when no current is drawn. It is measured with a potentiometer or a high-resistance voltmeter.
Nernst equation for an electrode Mn⁺ + ne⁻ → M: E = E° − (2.303RT/nF) log(1/[Mn⁺]).
At 298 K, 2.303RT/F = 0.059 V, so E = E° − (0.059/n) log Q for any cell reaction.
Pure solids and liquids do not appear in Q; gases enter as partial pressures in bar.
Raising reactant concentration (cathode ion) raises Ecell; raising product concentration (anode ion) lowers it.
Hydrogen electrode at 1 bar: E = −0.059 × pH.
Concentration cell: same electrode, different concentrations; E°cell = 0 and Ecell = (0.059/n) log(c₂/c₁), where c₂ is at the cathode (the more concentrated side).
At equilibrium Ecell = 0 and Q = K, which gives log K = nE°/0.059.
ΔG = −nFEcell and ΔG° = −nFE°cell = −RT ln K.
E° is intensive and ΔG° is extensive: doubling the equation doubles ΔG° and n, not E°.
To combine half-reactions that give a new half-reaction, add ΔG° values, not E°: E°₃ = (n₁E°₁ + n₂E°₂)/n₃.
E°cell greater than 0 means ΔG° less than 0 and K greater than 1.
Must-remember table
| Relation | Formula | Units and values |
|---|---|---|
| Nernst (298 K) | E = E° − (0.059/n) log Q | V |
| Gibbs energy | ΔG° = −nFE° | J mol⁻¹, F = 96500 C mol⁻¹ |
| Equilibrium constant | log K = nE°/0.059 | dimensionless |
| Link of ΔG° and K | ΔG° = −2.303RT log K | R = 8.314 J K⁻¹ mol⁻¹ |
| Hydrogen electrode | E = −0.059 pH | 1 bar H₂ |
| Concentration cell | E = (0.059/n) log(c₂/c₁) | E° = 0 |
| Combining half-cells | E°₃ = (n₁E°₁ + n₂E°₂)/n₃ | Fe³⁺/Fe = −0.037 V |
| Daniell cell | ΔG° = −212.3 kJ mol⁻¹ | n = 2, E° = 1.10 V |
Memory aids
"Minus nFE": ΔG° = −nFE°. Positive E gives negative G: the reaction goes.
"Products on top": Q has products over reactants, so more product means lower Ecell.
"Fifty-nine over n per decade": each tenfold change in Q shifts E by 0.059/n V.
"Add G, not E": when two half-reactions combine into a new half-reaction, add nE° terms (ΔG°), then divide by the new n.
Concept connections
ΔG° = −RT ln K and spontaneity come from Chemistry Book 4: Chemical Thermodynamics.
Q, K and pH used in the Nernst equation are from Chemistry Book 6: Equilibrium.
Logarithms and the log Q form also appear in rate laws of Chemistry Book 8: Chemical Kinetics.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. Match List I (quantity or condition) with List II (expression at 298 K).
List I: A. ΔG° B. E°cell in terms of K C. Ecell at any concentration D. Ecell at equilibrium
List II: (i) 0 (ii) −nFE°cell (iii) (0.059/n) log K (iv) E°cell − (0.059/n) log Q
(a) A-ii, B-iv, C-iii, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-iii, C-iv, D-ii
32. Match List I (n and E°cell) with List II (K at 298 K). Take 2.303RT/F = 0.059 V.
List I: A. n = 1, E° = 0.059 V B. n = 2, E° = 0.059 V C. n = 1, E° = 0.177 V D. n = 2, E° = 0.118 V
List II: (i) 10³ (ii) 10⁴ (iii) 10 (iv) 10²
(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii
33. Match List I (sign or value) with List II (consequence).
List I: A. E°cell greater than 0 B. E°cell less than 0 C. E°cell = 0 D. Ecell = 0 (non-standard)
List II: (i) Q = K (ii) ΔG° positive, K less than 1 (iii) K = 1 (iv) ΔG° negative, K greater than 1
(a) A-iv, B-ii, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-iv, B-ii, C-i, D-iii
34. Match List I (pH of the solution in a hydrogen electrode, H₂ at 1 bar, 298 K) with List II (its reduction potential).
List I: A. pH 0 B. pH 2 C. pH 5 D. pH 10
List II: (i) −0.295 V (ii) 0.000 V (iii) −0.590 V (iv) −0.118 V
(a) A-ii, B-i, C-iv, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i
35. How many of the following statements are correct?
A. Ecell is an intensive property, while ΔG is extensive.
B. For a Daniell cell, Ecell rises when [Cu²⁺] is increased.
C. For a Daniell cell, Ecell rises when [Zn²⁺] is increased.
D. For a concentration cell, E°cell = 0.
E. If K for a cell reaction is greater than 1, E°cell is positive.
(a) 3 (b) 4 (c) 2 (d) 5
36. Choose the correct set of statements.
A. One faraday is the charge on one mole of electrons.
B. ΔG° = −RT ln K.
C. The Nernst equation holds only at 298 K.
D. Pure solids and pure liquids are left out of the reaction quotient Q.
(a) A and B only (b) B, C and D only (c) A, B, C and D (d) A, B and D only
37. For the cell Ag | Ag⁺(0.01 M) || Ag⁺(1 M) | Ag at 298 K, how many statements are correct?
A. E°cell = 0.
B. Ecell = 0.118 V.
C. The electrode in 0.01 M Ag⁺ is the anode.
D. As the cell runs, [Ag⁺] on the 0.01 M side decreases.
E. n = 2 for this cell.
(a) 2 (b) 4 (c) 3 (d) 5
38. Choose the correct set of statements.
A. For Zn + Cu²⁺ → Zn²⁺ + Cu (E° = 1.10 V), ΔG° = −212.3 kJ mol⁻¹.
B. If the cell equation is doubled, E°cell stays the same but ΔG° doubles.
C. E°(Fe³⁺/Fe) is the simple sum of E°(Fe³⁺/Fe²⁺) and E°(Fe²⁺/Fe).
D. A larger E°cell always means a faster reaction.
(a) A and B only (b) A, B and C only (c) B and D only (d) A and D only
39. For a Daniell cell at 298 K, a graph of Ecell (y-axis) against log([Zn²⁺]/[Cu²⁺]) (x-axis) is a straight line with intercept 1.10 V and slope −0.0295 V. When log([Zn²⁺]/[Cu²⁺]) = 2, Ecell is
(a) 1.159 V (b) 1.100 V (c) 1.041 V (d) 1.071 V
40. For a cell reaction at 298 K, a plot of Ecell against log Q is a straight line with slope −0.0197 V. The number of electrons transferred, n, is
(a) 1 (b) 3 (c) 2 (d) 6
41. The table gives the reduction potential of a Ni²⁺/Ni electrode at 298 K at different [Ni²⁺].
| [Ni²⁺] (M) | 1 | 0.1 | 0.01 |
|---|---|---|---|
| E (V) | −0.2500 | −0.2795 | −0.3090 |
The value of E when [Ni²⁺] = 0.001 M is closest to
(a) −0.43 V (b) −0.31 V (c) −0.22 V (d) −0.34 V
Case for Q42–43: A cell is set up as Mg | Mg²⁺(0.01 M) || Ag⁺(0.1 M) | Ag at 298 K. E°(Mg²⁺/Mg) = −2.36 V and E°(Ag⁺/Ag) = +0.80 V. The cell reaction is Mg + 2Ag⁺ → Mg²⁺ + 2Ag. Take F = 96500 C mol⁻¹.
42. Ecell under these conditions is
(a) 3.16 V (b) 3.13 V (c) 3.19 V (d) 1.56 V
43. ΔG for the cell reaction under these conditions is about
(a) −305 kJ mol⁻¹ (b) −1220 kJ mol⁻¹ (c) −610 kJ mol⁻¹ (d) +610 kJ mol⁻¹
44. Given E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(Fe²⁺/Fe) = −0.44 V, E°(Fe³⁺/Fe) is
(a) +0.33 V (b) −0.037 V (c) −0.11 V (d) +1.21 V
45. The cell Pt | H₂(1 bar) | H⁺(unknown) || H⁺(1 M) | H₂(1 bar) | Pt shows Ecell = 0.236 V at 298 K. The pH of the unknown solution is
(a) 2 (b) 6 (c) 3 (d) 4
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | ΔG° = −nFE°; E° = (0.059/n) log K; Nernst form; Ecell = 0 at equilibrium |
| 32 | d | log K = nE°/0.059 gives 1, 2, 3, 4 |
| 33 | a | Signs follow ΔG° = −nFE° and ΔG° = −RT ln K; Ecell = 0 means Q = K |
| 34 | c | E = −0.059 pH: 0, −0.118, −0.295, −0.590 V |
| 35 | b | Only C is false; [Zn²⁺] is a product and lowers Ecell |
| 36 | d | The general Nernst equation holds at any T; 0.059 is for 298 K |
| 37 | c | A, B, C true; the dilute side gains Ag⁺; n = 1 |
| 38 | a | E° values cannot be added for a new half-reaction; E° says nothing about rate |
| 39 | c | 1.10 − 0.0295 × 2 = 1.041 V |
| 40 | b | 0.059/n = 0.0197 gives n = 3 |
| 41 | d | Each tenfold dilution lowers E by 0.0295 V: −0.3385 V |
| 42 | a | Q = 0.01/(0.1)² = 1, so Ecell = E°cell = 0.80 + 2.36 = 3.16 V |
| 43 | c | ΔG = −2 × 96500 × 3.16 = −609.9 kJ mol⁻¹ |
| 44 | b | (1 × 0.77 + 2 × (−0.44))/3 = −0.037 V |
| 45 | d | Ecell = 0.059 × pH; pH = 0.236/0.059 = 4 |