Chapter 8 of 12 · 20 min read

Chapter 6: Kohlrausch's Law and Its Applications

At infinite dilution, every ion moves on its own and adds a fixed amount to the molar conductivity. This one idea, Kohlrausch's law, lets you find Λ°m of weak electrolytes, their degree of dissociation and Ka, and even the solubility of salts like AgCl.

What you will learn

  • The statement of Kohlrausch's law of independent migration of ions.

  • How to build Λ°m of any electrolyte from limiting ionic conductivities.

  • How to get Λ°m of a weak electrolyte from three strong electrolytes.

  • How to find the degree of dissociation and the dissociation constant of a weak acid.

  • How to find the solubility and Ksp of a sparingly soluble salt.

6.1 The law

In a very dilute solution, ions are so far apart that they do not feel each other. Each ion then carries current at its own fixed rate. Kohlrausch noticed that differences such as Λ°m(KCl) − Λ°m(NaCl) and Λ°m(KBr) − Λ°m(NaBr) came out the same. That difference could only be the K⁺–Na⁺ difference.

Kohlrausch's law of independent migration of ions: the limiting molar conductivity of an electrolyte is the sum of the limiting molar conductivities of its cation and anion, each multiplied by the number of such ions in one formula unit.

Λm∘=ν+λ+∘+ν−λ−∘\Lambda_m^{\circ} = \nu_{+} \lambda_{+}^{\circ} + \nu_{-} \lambda_{-}^{\circ}

For CaCl₂, ν₊ = 1 and ν₋ = 2. For Al₂(SO₄)₃, ν₊ = 2 and ν₋ = 3.

6.2 Limiting ionic conductivities

Values in water at 298 K (S cm² mol⁻¹), used throughout this chapter:

Cationλ°Anionλ°
H⁺349.6OH⁻199.1
K⁺73.5SO₄²⁻160.0
NH₄⁺73.4Br⁻78.1
Ag⁺61.9Cl⁻76.3
Na⁺50.1CH₃COO⁻40.9
Ca²⁺119.0
Mg²⁺106.0

Two patterns stand out. H⁺ and OH⁻ are far ahead because they pass charge by proton hopping along hydrogen bonds rather than by moving through the water. Among alkali ions, K⁺ beats Na⁺ because the smaller Na⁺ drags a larger shell of water.

6.3 Application 1: Λ°m of a weak electrolyte

For acetic acid, the Λm against √c curve never straightens, so we cannot extrapolate. Kohlrausch's law gets around this by adding and subtracting strong electrolytes whose Λ°m we can measure.

ΛCH3COOH∘=ΛCH3COONa∘+ΛHCl∘−ΛNaCl∘\Lambda^{\circ}_{\mathrm{CH_3COOH}} = \Lambda^{\circ}_{\mathrm{CH_3COONa}} + \Lambda^{\circ}_{\mathrm{HCl}} - \Lambda^{\circ}_{\mathrm{NaCl}}

Why it works: the right side equals (λ°Na⁺ + λ°CH₃COO⁻) + (λ°H⁺ + λ°Cl⁻) − (λ°Na⁺ + λ°Cl⁻). Na⁺ and Cl⁻ cancel, leaving λ°H⁺ + λ°CH₃COO⁻.

With measured values 91.0, 425.9 and 126.4 S cm² mol⁻¹:

ΛCH3COOH∘=91.0+425.9−126.4=390.5 S cm2 mol−1\Lambda^{\circ}_{\mathrm{CH_3COOH}} = 91.0 + 425.9 - 126.4 = 390.5\ \text{S cm}^2\text{ mol}^{-1}

The same trick gives Λ°m(NH₄OH) = Λ°m(NH₄Cl) + Λ°m(NaOH) − Λ°m(NaCl). The rule for choosing: pick three strong electrolytes so that the unwanted ions cancel exactly.

6.4 Application 2: degree of dissociation and Ka

For a weak electrolyte, Λm at concentration c is low only because a fraction of molecules is ionised. At infinite dilution all of them are. So, as a good approximation (Arrhenius):

α=ΛmcΛm∘\alpha = \frac{\Lambda_m^{c}}{\Lambda_m^{\circ}}

For a weak acid HA ⇌ H⁺ + A⁻ at concentration c, the equilibrium amounts are c(1 − α), cα and cα. Ostwald's dilution law then gives:

Ka=cα21−α=c (Λmc)2Λm∘ (Λm∘−Λmc)K_a = \frac{c\alpha^2}{1 - \alpha} = \frac{c\,(\Lambda_m^{c})^2}{\Lambda_m^{\circ}\,(\Lambda_m^{\circ} - \Lambda_m^{c})}

If α is very small, 1 − α ≈ 1 and Ka ≈ cα². Then α ≈ √(Ka/c): halving c raises α by √2, and quartering c doubles it.

Once α is known, [H⁺] = cα, and pH = −log(cα).

6.5 Application 3: solubility and Ksp of a sparingly soluble salt

AgCl, BaSO₄ and PbSO₄ dissolve so little that their saturated solutions are extremely dilute. So Λm of the saturated solution is practically Λ°m, which Kohlrausch's law supplies.

  1. Measure κ of the saturated solution and subtract κ of the water used: κ(salt) = κ(solution) − κ(water).

  2. Find Λ°m from ionic values.

  3. Solubility in mol L⁻¹:

s=κsalt×1000Λm∘s = \frac{\kappa_{\text{salt}} \times 1000}{\Lambda_m^{\circ}}
  1. For a 1:1 salt such as AgCl or BaSO₄, Ksp = s².

6.6 Summary of uses

UseFormulaTypical NEET ask
Λ°m of any electrolyteν₊λ°₊ + ν₋λ°₋Λ°m of CaCl₂, Al₂(SO₄)₃
Λ°m of a weak electrolyteAdd two, subtract one strong electrolyteΛ°m of CH₃COOH, NH₄OH
Degree of dissociationα = Λm/Λ°mα of acetic acid at given c
Dissociation constantKa = cα²/(1 − α)Ka or pH from conductivity
Solubility and Ksps = κ × 1000/Λ°m; Ksp = s²AgCl, BaSO₄

Worked examples

Worked example 6.1: Find Λ°m of CaCl₂.

Solution: Λ°m = 119.0 + 2 × 76.3 = 271.6 S cm² mol⁻¹.

Worked example 6.2: Λ°m of BaCl₂ is 280.0 S cm² mol⁻¹. Find λ°(Ba²⁺).

Solution: 280.0 = λ°(Ba²⁺) + 2 × 76.3. So λ°(Ba²⁺) = 280.0 − 152.6 = 127.4 S cm² mol⁻¹.

Worked example 6.3: Given Λ°m (S cm² mol⁻¹) of NH₄Cl = 149.7, NaOH = 249.2 and NaCl = 126.4, find Λ°m of NH₄OH.

Solution: Λ°m(NH₄OH) = 149.7 + 249.2 − 126.4 = 272.5 S cm² mol⁻¹.

Worked example 6.4: A 0.002 M acetic acid solution has κ = 7.8 × 10⁻⁵ S cm⁻¹. Find Λm and α, using Λ°m = 390.5 S cm² mol⁻¹.

Solution: Λm = (7.8 × 10⁻⁵ × 1000)/0.002 = 39.0 S cm² mol⁻¹. α = 39.0/390.5 = 0.0999, about 0.10.

Worked example 6.5: Use the result of 6.4 to find Ka of acetic acid.

Solution: Ka = cα²/(1 − α) = 0.002 × (0.10)²/0.90 = 2.2 × 10⁻⁵.

Worked example 6.6: A saturated AgCl solution has κ = 3.40 × 10⁻⁶ S cm⁻¹, and the water used has κ = 1.60 × 10⁻⁶ S cm⁻¹. Find the solubility and Ksp of AgCl.

Solution: κ(AgCl) = 1.80 × 10⁻⁶ S cm⁻¹. Λ°m(AgCl) = 61.9 + 76.3 = 138.2 S cm² mol⁻¹. s = (1.80 × 10⁻⁶ × 1000)/138.2 = 1.30 × 10⁻⁵ mol L⁻¹. Ksp = s² = 1.70 × 10⁻¹⁰.

Worked example 6.7: Which three strong electrolytes would you use to find Λ°m of HCOOH?

Solution: HCOONa + HCl − NaCl. Na⁺ and Cl⁻ cancel, leaving λ°(H⁺) + λ°(HCOO⁻).

Worked example 6.8 (NEET-hard): For 0.01 M acetic acid, Λm = 16.3 S cm² mol⁻¹ and Λ°m = 390.5 S cm² mol⁻¹. Find α, the pH and Ka.

Solution: α = 16.3/390.5 = 0.0417. [H⁺] = cα = 4.17 × 10⁻⁴ M, so pH = −log(4.17 × 10⁻⁴) = 3.38. Ka = 0.01 × (0.0417)²/(1 − 0.0417) = 1.82 × 10⁻⁵.

Quick revision

  • Λ°m = ν₊λ°₊ + ν₋λ°₋; multiply each ion by its count in the formula.

  • Λ°(CH₃COOH) = Λ°(CH₃COONa) + Λ°(HCl) − Λ°(NaCl).

  • α = Λm/Λ°m for a weak electrolyte.

  • Ka = cα²/(1 − α); for small α, α ≈ √(Ka/c).

  • Sparingly soluble salt: s = κ × 1000/Λ°m, Ksp = s² for 1:1 salts.

  • Subtract the conductivity of water before using κ of a saturated solution.

  • H⁺ and OH⁻ have the highest λ° values; Li⁺ is slower than K⁺.

NEET traps

  • Forgetting the stoichiometric multiplier (2 × λ°Cl⁻ in CaCl₂).

  • Adding all three electrolytes instead of adding two and subtracting one.

  • Using α = Λ°m/Λm (upside down). α must be less than 1.

  • Using Ka ≈ cα² when α is not small (for example α = 0.2).

  • Skipping the water correction in solubility problems.

  • Applying α = Λm/Λ°m to a strong electrolyte. Its Λm falls for a different reason (ion attraction), not incomplete dissociation.

Practice MCQs: Chapter 6

Use the λ° table in Section 6.2 where needed.

Level 1: Concept check

1. Kohlrausch's law states that, at infinite dilution, the molar conductivity of an electrolyte equals (a) the product of the ionic conductivities (b) the conductivity of the cation only (c) the sum of the limiting conductivities of its ions, each multiplied by its number in the formula (d) the difference of the cation and anion conductivities

2. Kohlrausch's law is chiefly used to find Λ°m of (a) strong electrolytes such as KCl (b) weak electrolytes such as CH₃COOH (c) metals (d) non-electrolytes such as sugar

3. The degree of dissociation of a weak electrolyte is given by (a) Λm/Λ°m (b) Λ°m/Λm (c) Λm × Λ°m (d) Λ°m − Λm

4. Among the following cations, the highest limiting ionic conductivity in water belongs to (a) K⁺ (b) Na⁺ (c) Li⁺ (d) H⁺

5. Using λ°(Na⁺) = 50.1 and λ°(Cl⁻) = 76.3 S cm² mol⁻¹, Λ°m(NaCl) is (a) 26.2 (b) 126.4 (c) 176.4 (d) 63.2 S cm² mol⁻¹

6. The unit of limiting ionic conductivity λ° is (a) S cm⁻¹ (b) S (c) S cm² mol⁻¹ (d) Ω cm

7. For a weak acid at concentration c and degree of dissociation α, Ka equals (a) cα²/(1 − α) (b) cα/(1 − α) (c) c²α/(1 − α) (d) α²/c

8. The solubility s (mol L⁻¹) of a sparingly soluble salt from its conductivity is (a) κ × Λ°m (b) Λ°m/κ (c) κ/1000 (d) κ × 1000/Λ°m

9. Λ°m of acetic acid cannot be found by extrapolating its Λm against √c curve because (a) acetic acid is a non-electrolyte (b) its Λm decreases on dilution (c) its degree of dissociation rises steeply near zero concentration (d) it has no ions at infinite dilution

10. The idea that each ion moves independently at infinite dilution is the basis of (a) Ostwald's dilution law (b) Kohlrausch's law (c) the Nernst equation (d) Faraday's first law

Level 2: NEET standard

11. Λ°m of CaCl₂ is (a) 271.6 (b) 195.3 (c) 152.6 (d) 290.0 S cm² mol⁻¹

12. Λ°m (S cm² mol⁻¹) of CH₃COONa, HCl and NaCl are 91.0, 425.9 and 126.4. Λ°m of CH₃COOH is (a) 643.3 (b) 211.5 (c) 390.5 (d) 461.3

13. A weak acid solution has Λm = 39.05 S cm² mol⁻¹ and Λ°m = 390.5 S cm² mol⁻¹. Its degree of dissociation is (a) 0.01 (b) 0.10 (c) 0.39 (d) 0.90

14. A 0.01 M weak acid is 20% dissociated. Its Ka is (a) 2.0 × 10⁻³ (b) 5.0 × 10⁻² (c) 8.0 × 10⁻⁴ (d) 5.0 × 10⁻⁴

15. Λ°m (S cm² mol⁻¹) of NH₄Cl, NaOH and NaCl are 149.7, 249.2 and 126.4. Λ°m of NH₄OH is (a) 272.5 (b) 525.3 (c) 26.9 (d) 399.6

16. If λ°(Al³⁺) = 189 and λ°(SO₄²⁻) = 160 S cm² mol⁻¹, Λ°m of Al₂(SO₄)₃ is (a) 349 (b) 538 (c) 858 (d) 669 S cm² mol⁻¹

17. Λ°m of BaCl₂ is 280.0 S cm² mol⁻¹. Using λ°(Cl⁻) = 76.3, λ°(Ba²⁺) is (a) 203.7 (b) 127.4 (c) 356.3 (d) 63.7 S cm² mol⁻¹

18. After correcting for water, a saturated AgCl solution has κ = 1.80 × 10⁻⁶ S cm⁻¹. With Λ°m(AgCl) = 138.2 S cm² mol⁻¹, the solubility of AgCl is (a) 1.30 × 10⁻⁵ M (b) 1.30 × 10⁻⁸ M (c) 2.49 × 10⁻⁴ M (d) 1.69 × 10⁻¹⁰ M

19. For the AgCl solution in Q18, Ksp is about (a) 1.30 × 10⁻⁵ (b) 3.40 × 10⁻¹⁰ (c) 1.80 × 10⁻⁶ (d) 1.70 × 10⁻¹⁰

20. To find Λ°m of HCOOH by Kohlrausch's law, the strong electrolytes needed are (a) HCOONa, NaOH, NaCl (b) HCOOK, KCl, NaCl (c) HCOONa, HCl, NaCl (d) HCl, NaCl, KCl

21. H⁺ has a much larger limiting ionic conductivity than Na⁺ because (a) H⁺ is heavier (b) H⁺ carries a larger charge (c) H⁺ is not hydrated at all (d) charge passes by proton hopping along hydrogen-bonded water molecules

22. A 0.002 M acetic acid solution has κ = 7.8 × 10⁻⁵ S cm⁻¹ and Λ°m = 390.5 S cm² mol⁻¹. Its degree of dissociation is about (a) 0.039 (b) 0.10 (c) 0.20 (d) 0.39

Level 3: Challenge

23. For 0.002 M acetic acid, Λm = 39.05 S cm² mol⁻¹ and Λ°m = 390.5 S cm² mol⁻¹. Ka is (a) 2.22 × 10⁻⁶ (b) 2.22 × 10⁻⁴ (c) 2.22 × 10⁻⁵ (d) 4.0 × 10⁻⁵

24. For 0.01 M acetic acid, Λm = 16.3 S cm² mol⁻¹ and Λ°m = 390.5 S cm² mol⁻¹. The pH of the solution is about (a) 2.00 (b) 3.38 (c) 4.38 (d) 1.62

25. Kohlrausch's law can be used to find all of the following except (a) Λ°m of a weak electrolyte (b) the degree of dissociation of a weak acid (c) the solubility of a sparingly soluble salt (d) E° of the Daniell cell

26. Λ°m of K₂SO₄ is (a) 307.0 (b) 233.5 (c) 380.5 (d) 153.5 S cm² mol⁻¹

27. After water correction, a saturated BaSO₄ solution has κ = 3.0 × 10⁻⁶ S cm⁻¹, and Λ°m(BaSO₄) = 287.4 S cm² mol⁻¹. Ksp of BaSO₄ is about (a) 1.04 × 10⁻⁵ (b) 1.09 × 10⁻¹⁰ (c) 3.0 × 10⁻⁶ (d) 1.09 × 10⁻⁵

28. A weak acid is about 5% dissociated at 0.04 M, where Λm = 20 S cm² mol⁻¹. At 0.01 M, its Λm is closest to (a) 10 S cm² mol⁻¹ (b) 20 S cm² mol⁻¹ (c) 40 S cm² mol⁻¹ (d) 80 S cm² mol⁻¹

29. Assertion (A): Λ°m of CH₃COOH can be obtained from Λ°m values of CH₃COONa, HCl and NaCl. Reason (R): At infinite dilution, each ion contributes a definite amount to Λ°m, whatever its partner ion. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Kohlrausch's law applies only to strong electrolytes. Statement II: In water, the limiting ionic conductivity of Li⁺ is greater than that of K⁺. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cIndependent migration of ions
2bWeak electrolytes cannot be extrapolated
3aFraction ionised = Λm/Λ°m
4dProton hopping
5b50.1 + 76.3
6cSame unit as Λm
7aOstwald's dilution law
8dΛ°m = κ × 1000/s
9cSteep, non-linear curve near c = 0
10bKohlrausch's law
11a119.0 + 2 × 76.3
12c91.0 + 425.9 − 126.4
13b39.05/390.5
14d0.01 × 0.04/0.8
15a149.7 + 249.2 − 126.4
16c2 × 189 + 3 × 160
17b280.0 − 152.6
18a1.80 × 10⁻³/138.2
19d(1.30 × 10⁻⁵)²
20cNa⁺ and Cl⁻ cancel
21dGrotthuss-type hopping
22bΛm = 39.0; 39.0/390.5
23c0.002 × 0.01/0.9
24b[H⁺] = 4.17 × 10⁻⁴ M
25dE° comes from electrode potentials
26a2 × 73.5 + 160.0
27bs = 1.04 × 10⁻⁵ M; Ksp = s²
28cα roughly doubles when c falls to one-fourth
29aR is the law that justifies A
30bThe law holds for all electrolytes; Li⁺ is slower

Chapter 6 revision sheet

One-page summary

  • Kohlrausch's law of independent migration: at infinite dilution, every ion contributes a fixed amount (its limiting molar conductivity λ°) to Λ°m, whatever the other ion is.

  • For an electrolyte that gives ν₊ cations and ν₋ anions: Λ°m = ν₊λ°₊ + ν₋λ°₋.

  • Examples: Λ°(CaCl₂) = λ°(Ca²⁺) + 2λ°(Cl⁻); Λ°(Al₂(SO₄)₃) = 2λ°(Al³⁺) + 3λ°(SO₄²⁻).

  • Λ° of a weak electrolyte is built from strong ones: Λ°(CH₃COOH) = Λ°(CH₃COONa) + Λ°(HCl) − Λ°(NaCl).

  • Similarly Λ°(NH₄OH) = Λ°(NH₄Cl) + Λ°(NaOH) − Λ°(NaCl).

  • Degree of dissociation of a weak electrolyte: α = Λm/Λ°m.

  • Dissociation constant: Ka = cα²/(1 − α); [H⁺] = cα for a weak monobasic acid.

  • Sparingly soluble salt: κ(salt) = κ(solution) − κ(water); solution is so dilute that Λm ≈ Λ°m; solubility s = 1000κ/Λ°m (mol L⁻¹).

  • Ksp = s² for AgCl or BaSO₄ type; 4s³ for CaF₂ type.

  • H⁺ (about 350 S cm² mol⁻¹) and OH⁻ (about 199) have the highest λ° because they move by proton hopping (Grotthuss mechanism).

  • Small ions like Li⁺ are heavily hydrated, so their λ° is lower than that of K⁺.

  • K⁺ and Cl⁻ have nearly equal λ°, which is why KCl is used in salt bridges.

Λm∘=ν+λ+∘+ν−λ−∘,α=ΛmΛm∘,Ka=cα21−α,s=1000 κΛm∘\Lambda_m^\circ = \nu_+\lambda_+^\circ + \nu_-\lambda_-^\circ, \qquad \alpha = \frac{\Lambda_m}{\Lambda_m^\circ}, \qquad K_a = \frac{c\alpha^2}{1-\alpha}, \qquad s = \frac{1000\,\kappa}{\Lambda_m^\circ}

Must-remember table

Ionλ° (S cm² mol⁻¹), approx.Note
H⁺349.6Highest; proton hopping
OH⁻199.1Second highest
K⁺73.5Nearly equal to Cl⁻
Cl⁻76.3Salt-bridge partner of K⁺
Na⁺50.1Lower than K⁺ (more hydrated)
CH₃COO⁻40.9Large, slow anion
Ca²⁺119.0Per mole of Ca²⁺ ions
SO₄²⁻160.0Per mole of SO₄²⁻ ions

Memory aids

  • "Add the two you want, subtract the one you don't": Λ°(weak AB) = Λ°(AX) + Λ°(YB) − Λ°(YX).

  • "Alpha = actual over ideal": α = Λm (actual) / Λ°m (ideal, fully dissociated).

  • "Subtract the water first": for solubility, always take κ(salt) = κ(solution) − κ(water).

  • "H hops, OH follows": H⁺ has the largest λ°, OH⁻ the next largest.

Concept connections

  • Ka, Kb, α and Ksp come from Chemistry Book 6: Equilibrium; conductance just gives another way to measure them.

  • Hydration of small ions and ionic size trends are from Chemistry Book 9: Classification of Elements and Periodicity in Properties.

  • Hydrogen bonding in water, which allows proton hopping, is from Chemistry Book 3: Chemical Bonding and Molecular Structure.

Practice MCQs: Chapter 6, Level 4 (new NEET pattern)

31. Match List I (electrolyte) with List II (expression for its Λ°m).

List I: A. CaCl₂   B. Al₂(SO₄)₃   C. CH₃COOH   D. NH₄OH

List II: (i) Λ°(NH₄Cl) + Λ°(NaOH) − Λ°(NaCl)   (ii) λ°(Ca²⁺) + 2λ°(Cl⁻)   (iii) Λ°(CH₃COONa) + Λ°(HCl) − Λ°(NaCl)   (iv) 2λ°(Al³⁺) + 3λ°(SO₄²⁻)

(a) A-ii, B-iv, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-iii, B-iv, C-ii, D-i

32. Using λ° (S cm² mol⁻¹): H⁺ 349.6, OH⁻ 199.1, Na⁺ 50.1, K⁺ 73.5, Cl⁻ 76.3, CH₃COO⁻ 40.9, match List I with List II (Λ°m in S cm² mol⁻¹).

List I: A. HCl   B. NaOH   C. KCl   D. CH₃COOH

List II: (i) 149.8   (ii) 390.5   (iii) 425.9   (iv) 249.2

(a) A-iii, B-i, C-iv, D-ii (b) A-ii, B-iv, C-i, D-iii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

33. Match List I (application of conductance) with List II (expression).

List I: A. Degree of dissociation of a weak electrolyte   B. Ka of a weak monobasic acid   C. Solubility of a sparingly soluble salt (mol L⁻¹)   D. Ksp of AgCl

List II: (i) s²   (ii) cα²/(1 − α)   (iii) 1000κ/Λ°m   (iv) Λm/Λ°m

(a) A-iv, B-ii, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-iv, B-ii, C-i, D-iii

34. Match List I (ion) with List II (reason for its λ° behaviour).

List I: A. H⁺   B. Li⁺   C. K⁺ and Cl⁻   D. SO₄²⁻

List II: (i) Nearly equal λ°, so used together in salt bridges   (ii) Moves by proton hopping through hydrogen-bonded water   (iii) Carries two units of charge per ion   (iv) Small ion, heavily hydrated, so it moves slowly

(a) A-ii, B-i, C-iv, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i

35. How many of the following statements are correct?

A. By Kohlrausch's law, Λ°m of an electrolyte is the sum of the contributions of its ions, each multiplied by the number of such ions.

B. Λ°m of a weak electrolyte can be found by extrapolating Λm vs √c to zero concentration.

C. λ°(H⁺) is the largest among common ions.

D. α = Λm/Λ°m is used for weak electrolytes.

E. Kohlrausch's law refers to infinite dilution.

(a) 2 (b) 5 (c) 3 (d) 4

36. Choose the correct set of statements.

A. Λ°(CH₃COOH) = Λ°(HCl) + Λ°(CH₃COONa) − Λ°(NaCl).

B. Λ°(NH₄OH) = Λ°(NH₄Cl) + Λ°(NaOH) − Λ°(NaCl).

C. Λ°(BaSO₄) = λ°(Ba²⁺) + 2λ°(SO₄²⁻).

D. For a sparingly soluble salt, Λm is taken as nearly equal to Λ°m.

(a) A and B only (b) A, B and D only (c) B, C and D only (d) A, B, C and D

37. For 0.001 M acetic acid, Λm = 78.1 S cm² mol⁻¹ and Λ°m = 390.5 S cm² mol⁻¹. How many statements are correct?

A. α = 0.2.

B. Ka = 5.0 × 10⁻⁵.

C. [H⁺] = 2 × 10⁻⁴ M.

D. pH = 4.

E. On further dilution, α decreases.

(a) 3 (b) 2 (c) 4 (d) 5

38. Choose the correct set of statements about finding solubility from conductance.

A. κ(salt) = κ(saturated solution) − κ(water used).

B. Solubility in mol L⁻¹ = 1000κ(salt)/Λ°m.

C. For AgCl, Ksp = s².

D. For CaF₂, Ksp = s².

(a) A and B only (b) B, C and D only (c) A, B and C only (d) A, B, C and D

39. The table gives Λ°m values.

ElectrolyteNaClHClCH₃COONa
Λ°m (S cm² mol⁻¹)126.4425.991.0

Λ°m of CH₃COOH is

(a) 461.3 S cm² mol⁻¹ (b) 390.5 S cm² mol⁻¹ (c) 643.3 S cm² mol⁻¹ (d) 160.5 S cm² mol⁻¹

40. A curve of Λm against √c for acetic acid shows Λm = 16.4 S cm² mol⁻¹ at c = 0.01 M. Taking Λ°m = 390.5 S cm² mol⁻¹, Ka of acetic acid is about

(a) 4.2 × 10⁻² (b) 1.8 × 10⁻⁴ (c) 4.2 × 10⁻⁴ (d) 1.8 × 10⁻⁵

41. The table gives Λ°m values.

ElectrolyteKClNaClKNO₃
Λ°m (S cm² mol⁻¹)149.9126.5145.0

Λ°m of NaNO₃ is

(a) 168.4 S cm² mol⁻¹ (b) 131.4 S cm² mol⁻¹ (c) 121.6 S cm² mol⁻¹ (d) 271.5 S cm² mol⁻¹

Case for Q42–43: A saturated solution of AgCl at 298 K has conductivity 3.40 × 10⁻⁶ S cm⁻¹. The water used to prepare it has conductivity 1.60 × 10⁻⁶ S cm⁻¹. Take λ°(Ag⁺) = 61.9 and λ°(Cl⁻) = 76.3 S cm² mol⁻¹.

42. The solubility of AgCl is about

(a) 1.3 × 10⁻⁵ mol L⁻¹ (b) 2.5 × 10⁻⁵ mol L⁻¹ (c) 1.3 × 10⁻⁸ mol L⁻¹ (d) 1.8 × 10⁻⁶ mol L⁻¹

43. The Ksp of AgCl is about

(a) 1.3 × 10⁻⁵ (b) 1.7 × 10⁻¹⁰ (c) 6.1 × 10⁻¹⁰ (d) 3.4 × 10⁻¹²

44. Λ°m values (S cm² mol⁻¹): Ba(OH)₂ 457.6, BaCl₂ 240.6, NH₄Cl 129.8. Λ°m of NH₄OH is

(a) 346.8 S cm² mol⁻¹ (b) 216.8 S cm² mol⁻¹ (c) 238.3 S cm² mol⁻¹ (d) 108.4 S cm² mol⁻¹

45. A 0.01 M solution of a weak monobasic acid HA has Λm = 39.05 S cm² mol⁻¹, and Λ°m(HA) = 390.5 S cm² mol⁻¹. The pH of the solution is

(a) 2 (b) 4 (c) 1 (d) 3

Level 4 answer key

QAnsReason
31bStrong salts from ions; weak electrolytes from three strong ones
32d349.6 + 76.3, 50.1 + 199.1, 73.5 + 76.3, 349.6 + 40.9
33aα = Λm/Λ°m; Ka = cα²/(1 − α); s = 1000κ/Λ°; Ksp = s²
34cH⁺ hops; Li⁺ is heavily hydrated; K⁺ and Cl⁻ match; SO₄²⁻ has charge 2
35dOnly B is false; weak electrolytes do not extrapolate
36bBa²⁺ and SO₄²⁻ are 1 : 1, so C is wrong
37aA, B, C true; pH = 3.70; α rises on dilution
38cCaF₂ gives Ksp = 4s³
39b425.9 + 91.0 − 126.4 = 390.5
40dα = 0.042; Ka = 0.01 × 0.042²/0.958 = 1.8 × 10⁻⁵
41c126.5 + 145.0 − 149.9 = 121.6
42aκ(AgCl) = 1.80 × 10⁻⁶; s = 1000 × 1.80 × 10⁻⁶/138.2 = 1.3 × 10⁻⁵
43b(1.30 × 10⁻⁵)² = 1.7 × 10⁻¹⁰
44c129.8 + 457.6/2 − 240.6/2 = 238.3
45dα = 0.1; [H⁺] = 0.01 × 0.1 = 10⁻³ M; pH = 3
20 min left
‹
›