Chapter 1: Classification, Nomenclature and the C–X Bond
What you will learn
How to sort halogen compounds by the number of halogens and by the type of carbon that holds the halogen.
The difference between alkyl, allylic, benzylic, vinylic and aryl halides, and why that difference controls reactivity.
Common names and IUPAC names of haloalkanes, dihalides and haloarenes.
Why the C–X bond is polar, and how bond length, bond enthalpy and dipole moment change from F to I.
How to count structural isomers of simple haloalkanes, a favourite NEET question.
1.1 What are halogen compounds?
Replace one hydrogen of a hydrocarbon with a halogen atom and you get a halogen compound. From an alkane you get a haloalkane (alkyl halide), R–X. From an aromatic ring you get a haloarene (aryl halide), Ar–X.
You already use these compounds. The "chloro" in many medicines, the PVC pipe in your bathroom (made from vinyl chloride) and the old refrigerant gas in your grandparents' fridge (a freon) are all halogen compounds.
1.2 Classification by number of halogen atoms
Monohalo compounds have one halogen: CH₃Cl, C₆H₅Br.
Dihalo compounds have two: CH₂Cl₂, ClCH₂CH₂Cl.
Trihalo and higher (polyhalogen) compounds have three or more: CHCl₃, CCl₄, CHI₃.
Dihalides of alkanes come in two kinds, and NEET likes this distinction.
| Type | Where the two X sit | Example | Common name | IUPAC name |
|---|---|---|---|---|
| Geminal (gem) | Same carbon | CH₃CHCl₂ | Ethylidene chloride | 1,1-Dichloroethane |
| Vicinal (vic) | Adjacent carbons | ClCH₂CH₂Cl | Ethylene dichloride | 1,2-Dichloroethane |
"Gem" comes from the Latin for twins: the two halogens are twins on one carbon. "Vic" means neighbours.
1.3 Classification by the carbon that holds X
This is the classification that matters for reactions. Look at the carbon bonded to X. Ask two questions. Is it sp³ or sp²? What is it attached to?
Compounds with a C(sp³)–X bond
Alkyl halides. X sits on an sp³ carbon of an alkyl chain. They are 1°, 2° or 3° depending on how many carbons are attached to the C–X carbon.
1°: CH₃CH₂Br (one carbon attached)
2°: (CH₃)₂CHBr (two carbons attached)
3°: (CH₃)₃CBr (three carbons attached)
Allylic halides. X sits on an sp³ carbon that is next to a C=C double bond. Example: CH₂=CH–CH₂Cl (allyl chloride).
Benzylic halides. X sits on an sp³ carbon that is next to a benzene ring. Example: C₆H₅CH₂Cl (benzyl chloride).
Compounds with a C(sp²)–X bond
Vinylic halides. X sits directly on a carbon of the C=C. Example: CH₂=CH–Cl (vinyl chloride).
Aryl halides. X sits directly on a carbon of the benzene ring. Example: C₆H₅Cl (chlorobenzene).
Allylic and benzylic halides can also be 1°, 2° or 3°. For example, CH₂=CH–CHCl–CH₃ is a 2° allylic halide.
| Class | Hybridisation of C–X carbon | Position of X | Example | Reactivity towards substitution |
|---|---|---|---|---|
| Alkyl | sp³ | On a saturated chain | CH₃CH₂Cl | Moderate |
| Allylic | sp³ | Next to C=C | CH₂=CHCH₂Cl | High |
| Benzylic | sp³ | Next to a ring | C₆H₅CH₂Cl | High |
| Vinylic | sp² | On a C=C carbon | CH₂=CHCl | Very low |
| Aryl | sp² | On a ring carbon | C₆H₅Cl | Very low |
A quick way to remember: allylic and benzylic are "one step away" from the double bond or ring. Vinylic and aryl are "sitting on" it. One step away makes the halide more reactive. Sitting on it makes the halide lazy. Chapters 4 and 6 explain why.
1.4 Naming halogen compounds
Common names take the alkyl group name and add the halide name: methyl chloride, isopropyl bromide, tert-butyl iodide.
IUPAC names treat the halogen as a prefix (fluoro, chloro, bromo, iodo) on the parent chain. The rules from Book 14 apply.
Choose the longest chain that holds the halogen-bearing carbon.
Number from the end that gives the lowest locants to all substituents together. Halogens and alkyl groups have equal priority as prefixes.
If there is still a tie, list prefixes alphabetically and give the lower number to the one that comes first.
A C=C or C≡C gets the lowest number before the halogen, since it is part of the parent name.
| Structure | Common name | IUPAC name |
|---|---|---|
| CH₃CH₂CH₂Cl | n-Propyl chloride | 1-Chloropropane |
| (CH₃)₂CHCl | Isopropyl chloride | 2-Chloropropane |
| CH₃CH₂CH(Cl)CH₃ | sec-Butyl chloride | 2-Chlorobutane |
| (CH₃)₂CHCH₂Cl | Isobutyl chloride | 1-Chloro-2-methylpropane |
| (CH₃)₃CCl | tert-Butyl chloride | 2-Chloro-2-methylpropane |
| (CH₃)₃CCH₂Cl | Neopentyl chloride | 1-Chloro-2,2-dimethylpropane |
| CH₂=CHCl | Vinyl chloride | Chloroethene |
| CH₂=CHCH₂Br | Allyl bromide | 3-Bromoprop-1-ene |
| C₆H₅CH₂Cl | Benzyl chloride | (Chloromethyl)benzene |
| CH₂Cl₂ | Methylene chloride | Dichloromethane |
| CHCl₃ | Chloroform | Trichloromethane |
| CHI₃ | Iodoform | Triiodomethane |
| CCl₄ | Carbon tetrachloride | Tetrachloromethane |
| C₆H₄Cl₂ (1,4) | p-Dichlorobenzene | 1,4-Dichlorobenzene |
Neopentyl chloride is a trap. The C–Cl carbon has only one carbon attached, so it is a 1° halide. Its neighbour is crowded, but that does not change its class.
For haloarenes, the ring positions may be given as o-, m-, p- (1,2-, 1,3-, 1,4-). In C₆H₄(CH₃)Cl, the common name is chlorotoluene and the IUPAC name is chloromethylbenzene, for example 1-chloro-4-methylbenzene.
1.5 The nature of the C–X bond
Halogens are more electronegative than carbon. Pauling values are C 2.5, F 4.0, Cl 3.0, Br 2.8, I 2.5. The shared electron pair in C–X sits closer to X. Carbon gets a small positive charge and X a small negative charge.
This partial positive carbon is what nucleophiles attack in Chapter 4. Even C–I, where the electronegativity values are almost equal, reacts readily because the bond is long, weak and easy to polarise.
Going down the group from F to I, the halogen atom gets bigger. Its orbitals are larger and more diffuse. They overlap poorly with the small carbon orbital. So the bond gets longer and weaker.
| Bond (in CH₃X) | Bond length (pm) | Bond enthalpy (kJ mol⁻¹) | Dipole moment of CH₃X (D) |
|---|---|---|---|
| C–F | 139 | 452 | 1.85 |
| C–Cl | 178 | 351 | 1.86 |
| C–Br | 193 | 293 | 1.83 |
| C–I | 214 | 234 | 1.64 |
Read the trends.
Bond length: C–F < C–Cl < C–Br < C–I.
Bond enthalpy: C–F > C–Cl > C–Br > C–I. So C–I breaks most easily, and iodides are the most reactive alkyl halides.
Dipole moment: CH₃Cl > CH₃F > CH₃Br > CH₃I. This order surprises students.
Why is CH₃F below CH₃Cl? Dipole moment is charge multiplied by distance.
F pulls more charge (larger q), but the C–F bond is much shorter (smaller d). The short length wins, so the product is a little smaller for CH₃F. From Cl to I, both the electronegativity difference and q fall, and this beats the gain in d.
1.6 The C–X bond in aryl and vinylic halides
In chlorobenzene, the C–Cl bond is about 169 pm, shorter than the 178 pm in CH₃Cl. Two reasons work together.
The carbon is sp². An sp² orbital has 33% s-character, against 25% for sp³. More s-character holds electrons closer to the nucleus, which makes a shorter bond.
A lone pair on Cl enters resonance with the ring. The C–Cl bond gets partial double bond character. Chapter 6 draws these structures.
A shorter, stronger bond is harder to break. This is the first clue to the low reactivity of aryl and vinylic halides.
Worked examples
Worked example 1.1: Classify each halide as alkyl (1°/2°/3°), allylic, benzylic, vinylic or aryl: (i) CH₃CH=CHCl (ii) C₆H₅CH(Br)CH₃ (iii) (CH₃)₂C(Cl)CH₂CH₃ (iv) p-ClC₆H₄CH₃.
Solution: (i) Cl is on a C=C carbon, so vinylic. (ii) Br is on an sp³ carbon next to the ring, and that carbon carries two carbons (ring carbon and CH₃), so 2° benzylic. (iii) The C–Cl carbon carries three carbons, so 3° alkyl. (iv) Cl is on the ring, so aryl. The CH₃ group does not change that.
Worked example 1.2: Give IUPAC names: (i) CH₃CHBrCH₂CH(CH₃)₂ (ii) BrCH₂CH=CHCH₃ (iii) CH₃C(Cl)₂CH₃.
Solution: (i) The longest chain has five carbons. Numbering from the left gives Br at 2 and CH₃ at 4, set {2, 4}. From the right gives {2, 4} too: CH₃ at 2, Br at 4. It is a tie, so use alphabetical order: bromo before methyl gets the lower number. Name: 2-bromo-4-methylpentane. (ii) The double bond takes the lowest number: 1-bromobut-2-ene. (iii) 2,2-Dichloropropane, a gem-dihalide.
Worked example 1.3: Draw and name all structural isomers of C₄H₉Cl. Classify each.
Solution: Two carbon skeletons are possible: the straight butane chain and the branched isobutane chain.
| Isomer | IUPAC name | Class |
|---|---|---|
| CH₃CH₂CH₂CH₂Cl | 1-Chlorobutane | 1° |
| CH₃CH₂CH(Cl)CH₃ | 2-Chlorobutane | 2° |
| (CH₃)₂CHCH₂Cl | 1-Chloro-2-methylpropane | 1° |
| (CH₃)₃CCl | 2-Chloro-2-methylpropane | 3° |
Four structural isomers. 2-Chlorobutane has a carbon with four different groups (H, Cl, CH₃, C₂H₅), so it exists as two mirror-image forms. Counting those, C₄H₉Cl has five isomers in total.
Worked example 1.4: Which bond needs the least energy to break: C–F, C–Cl, C–Br or C–I? Which haloalkane will therefore react fastest when the C–X bond breaks in the slow step?
Solution: C–I has the lowest bond enthalpy (234 kJ mol⁻¹). The iodide reacts fastest. The order of reactivity for the same alkyl group is R–I > R–Br > R–Cl > R–F.
Worked example 1.5: Arrange CH₃F, CH₃Cl, CH₃Br and CH₃I in increasing dipole moment and justify the place of CH₃F.
Solution: CH₃I < CH₃Br < CH₃F < CH₃Cl. Fluorine creates the largest partial charge, but the C–F bond is only 139 pm against 178 pm for C–Cl. Since μ = q × d, the much shorter distance makes CH₃F's dipole a little smaller than CH₃Cl's.
Worked example 1.6: The dipole moment of CH₃F is 1.85 D and its C–F bond length is 139 pm. Estimate the partial charge on F as a fraction of the electronic charge. Take 1 D = 3.336 × 10⁻³⁰ C m and e = 1.602 × 10⁻¹⁹ C.
Solution: Treat the whole molecular dipole as sitting on the C–F bond.
So F carries about 0.28 of an electron's charge. The bond is polar but far from ionic.
Worked example 1.7: C₅H₁₁Cl has eight structural isomers. How many are 1°, 2° and 3°? How many are chiral?
Solution: List them by skeleton.
| Skeleton | Isomer | Class | Chiral? |
|---|---|---|---|
| Pentane | 1-Chloropentane | 1° | No |
| Pentane | 2-Chloropentane | 2° | Yes |
| Pentane | 3-Chloropentane | 2° | No |
| 2-Methylbutane | 1-Chloro-2-methylbutane | 1° | Yes |
| 2-Methylbutane | 2-Chloro-2-methylbutane | 3° | No |
| 2-Methylbutane | 2-Chloro-3-methylbutane | 2° | Yes |
| 2-Methylbutane | 1-Chloro-3-methylbutane | 1° | No |
| 2,2-Dimethylpropane | 1-Chloro-2,2-dimethylpropane | 1° | No |
Four are 1°, three are 2°, one is 3°. Three are chiral. In 3-chloropentane the C–Cl carbon carries two identical ethyl groups, so it is not chiral.
Worked example 1.8: The C–Cl bond in vinyl chloride (CH₂=CHCl) is shorter than in ethyl chloride. Give two reasons.
Solution: First, the C–Cl carbon in vinyl chloride is sp². Its higher s-character pulls the bonding pair closer, shortening the bond. Second, a lone pair on Cl conjugates with the C=C, giving resonance form CH₂⁻–CH=Cl⁺. That gives C–Cl some double bond character. Both effects shorten and strengthen the bond.
Quick revision
Haloalkanes are R–X; haloarenes are Ar–X. Gem-dihalides have both X on one carbon; vic-dihalides on adjacent carbons.
C(sp³)–X: alkyl, allylic, benzylic. C(sp²)–X: vinylic, aryl.
1°, 2°, 3° = number of carbons on the C–X carbon. Neopentyl halides are 1°.
In IUPAC names, halogens are prefixes with the same rank as alkyl groups; break ties alphabetically.
C–X is polar: Cδ+ and Xδ−.
Bond length rises and bond enthalpy falls from F to I. Reactivity of R–X: RI > RBr > RCl > RF.
Dipole moment: CH₃Cl > CH₃F > CH₃Br > CH₃I.
Aryl and vinylic C–X bonds are shorter and stronger because of sp² carbon and resonance.
NEET traps
Calling allyl chloride a vinylic halide. In allyl chloride the Cl is on the CH₂ next to the double bond, not on it.
Calling benzyl chloride an aryl halide. Its Cl is on the CH₂ outside the ring.
Thinking CH₃F has the highest dipole moment because F is the most electronegative. Bond length matters too.
Classifying neopentyl chloride as 3° or 4° because the next carbon is crowded. It is 1°.
Forgetting that a C=C must get the lowest locant before the halogen when naming unsaturated halides.
Counting only straight-chain isomers when asked for all structural isomers.
Practice MCQs: Chapter 1
Level 1: Concept check
1. Which of the following is a vinylic halide? (a) CH₂=CH–CH₂Cl (b) C₆H₅CH₂Br (c) CH₃CH=CHBr (d) (CH₃)₃CCl
2. The hybridisation of the carbon bonded to chlorine in chlorobenzene is (a) sp³ (b) sp² (c) sp (d) sp³d
3. The IUPAC name of (CH₃)₃CBr is (a) 2-bromo-2-methylpropane (b) 1-bromo-2-methylpropane (c) 2-bromobutane (d) 1-bromo-1,1-dimethylethane
4. Which of the following is a geminal dihalide? (a) BrCH₂CH₂Br (b) CH₃CHBr₂ (c) BrCH₂CH₂CH₂Br (d) BrCH=CHBr
5. In the series CH₃X, the longest C–X bond is (a) C–F (b) C–Cl (c) C–Br (d) C–I
6. Which bond has the highest bond enthalpy? (a) C–F (b) C–Cl (c) C–Br (d) C–I
7. Benzyl chloride, C₆H₅CH₂Cl, is best described as (a) an aryl halide (b) a vinylic halide (c) a benzylic halide (d) an allylic halide
8. The common name of CH₂Cl₂ is (a) methylene chloride (b) methyl chloride (c) chloroform (d) ethylidene chloride
9. Which of these has the highest dipole moment? (a) CH₃F (b) CH₃Cl (c) CH₃Br (d) CH₃I
10. Which of the following is an allylic halide? (a) CH₂=CHCl (b) CH₃CH₂CH₂Br (c) C₆H₅Br (d) CH₂=CHCH₂Br
Level 2: NEET standard
11. The number of structural isomers possible for C₄H₉Cl is (a) 2 (b) 3 (c) 4 (d) 5
12. The correct IUPAC name of (CH₃)₂CHCH₂Cl is (a) 3-chloro-2-methylpropane (b) 2-chloro-2-methylpropane (c) 1-chloro-2,2-dimethylethane (d) 1-chloro-2-methylpropane
13. Neopentyl chloride, (CH₃)₃CCH₂Cl, is a (a) primary halide (b) secondary halide (c) tertiary halide (d) benzylic halide
14. In which pair is the halogen attached to an sp³ carbon in both compounds? (a) Vinyl chloride and chlorobenzene (b) Allyl chloride and vinyl chloride (c) Allyl chloride and benzyl chloride (d) Benzyl chloride and chlorobenzene
15. How many structural isomers are possible for C₃H₆Cl₂? (a) 3 (b) 4 (c) 5 (d) 6
16. The C–Cl bond in chlorobenzene is shorter than that in CH₃Cl mainly because (a) chlorine is larger in chlorobenzene (b) the ring pushes electrons into the C–Cl bond by hyperconjugation (c) the C–Cl bond in chlorobenzene is ionic (d) the carbon is sp² and the bond has partial double bond character
17. Which of the following is a vicinal dihalide? (a) CH₃CHBrCH₂Br (b) CH₃CHBr₂ (c) CH₃CBr₂CH₃ (d) BrCH₂CH₂CH₂Br
18. CH₃F has a slightly smaller dipole moment than CH₃Cl because (a) F is less electronegative than Cl (b) the C–F bond is much shorter than the C–Cl bond (c) CH₃F is non-polar (d) F has no lone pairs
19. Going from C–F to C–I, which property shows the correct trend? (a) Bond length decreases (b) Bond polarity increases (c) Bond enthalpy decreases (d) Electronegativity difference increases
20. How many isomers of formula C₇H₇Cl contain a benzene ring? (a) 4 (b) 3 (c) 5 (d) 2
21. Ethylidene chloride has the IUPAC name (a) 1,2-dichloroethane (b) 1,1-dichloroethene (c) 1,1-dichloroethane (d) chloroethene
22. Which of the following is a secondary alkyl halide? (a) CH₃CH₂CH₂Br (b) (CH₃)₃CBr (c) (CH₃)₂CHCH₂Br (d) CH₃CH₂CH(Br)CH₃
Level 3: Challenge
23. Counting stereoisomers as separate compounds, the total number of isomers of C₄H₉Br is (a) 4 (b) 5 (c) 6 (d) 3
24. How many structural isomers of C₅H₁₁Cl contain a chiral carbon? (a) 2 (b) 4 (c) 5 (d) 3
25. The IUPAC name of CH₃CH(Cl)CH(CH₃)CH₂CH₃ is (a) 2-chloro-3-methylpentane (b) 4-chloro-3-methylpentane (c) 2-chloro-3-ethylbutane (d) 3-methyl-4-chloropentane
26. The correct decreasing order of C–X bond length is (a) CH₃I > CH₃Br > C₆H₅Cl > CH₃Cl (b) C₆H₅Cl > CH₃Cl > CH₃Br > CH₃I (c) CH₃I > CH₃Br > CH₃Cl > C₆H₅Cl (d) CH₃Cl > CH₃Br > CH₃I > C₆H₅Cl
27. CH₃Cl has a dipole moment of 1.86 D and a C–Cl bond length of 178 pm. Treating the dipole as lying along C–Cl, the partial charge on Cl as a fraction of e is about (1 D = 3.336 × 10⁻³⁰ C m, e = 1.602 × 10⁻¹⁹ C) (a) 0.11 (b) 0.44 (c) 0.65 (d) 0.22
28. Which compound is a secondary allylic halide? (a) CH₂=CHCH₂Cl (b) CH₂=CH–CH(Cl)–CH₃ (c) CH₃CH=C(Cl)CH₃ (d) C₆H₅CH₂Cl
29. Assertion (A): CH₃F has a smaller dipole moment than CH₃Cl. Reason (R): Fluorine is less electronegative than chlorine. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: In allyl and benzyl halides, the halogen is bonded to an sp³ carbon. Statement II: In the C–X bond of a haloalkane, carbon carries a partial positive charge. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Br sits directly on a C=C carbon. |
| 2 | b | Ring carbons are sp². |
| 3 | a | Three-carbon chain, Br and CH₃ both on C-2. |
| 4 | b | Both Br on the same carbon. |
| 5 | d | Iodine is the largest atom. |
| 6 | a | Small F overlaps best with carbon. |
| 7 | c | Cl on the sp³ CH₂ next to the ring. |
| 8 | a | CH₂ is the methylene group. |
| 9 | b | Order CH₃Cl > CH₃F > CH₃Br > CH₃I. |
| 10 | d | Br on the CH₂ next to C=C. |
| 11 | c | 1-chloro-, 2-chlorobutane and two from isobutane. |
| 12 | d | Number from the Cl end: Cl at 1, CH₃ at 2. |
| 13 | a | C–Cl carbon has one carbon attached. |
| 14 | c | Both have Cl on an sp³ CH₂. |
| 15 | b | 1,1-, 1,2-, 1,3- and 2,2-dichloropropane. |
| 16 | d | sp² carbon plus resonance shortens C–Cl. |
| 17 | a | Br on C-1 and C-2, adjacent carbons. |
| 18 | b | μ = q × d; small d lowers μ. |
| 19 | c | Larger X, poorer overlap, weaker bond. |
| 20 | a | o-, m-, p-chlorotoluene and benzyl chloride. |
| 21 | c | Ethylidene = both Cl on one carbon. |
| 22 | d | C–Br carbon carries two carbons. |
| 23 | b | Four structural isomers; 2-bromobutane has two enantiomers. |
| 24 | d | 2-chloropentane, 1-chloro-2-methylbutane, 2-chloro-3-methylbutane. |
| 25 | a | Lowest locants {2,3}; chloro before methyl. |
| 26 | c | Larger X, longer bond; aryl C–Cl (169 pm) shortest. |
| 27 | d | δ = 1.86 × 3.336e-30 / (1.602e-19 × 178e-12) ≈ 0.22. |
| 28 | b | Cl on sp³ carbon next to C=C, carrying two carbons. |
| 29 | c | F is more electronegative; short bond lowers μ. |
| 30 | a | Both statements are correct facts. |
Chapter 1 revision sheet
One-page summary
Haloalkane = R–X (X on an sp³ carbon of an alkyl chain); haloarene = Ar–X (X directly on a benzene ring carbon).
Mono-, di-, tri- and polyhalogen compounds are named by the number of halogen atoms.
C(sp³)–X family: alkyl, allylic (X on the carbon next to C=C), benzylic (X on the carbon next to a ring).
C(sp²)–X family: vinylic (X on a C=C carbon) and aryl (X on a ring carbon).
1°, 2°, 3° = number of carbons attached to the carbon carrying X. Neopentyl halide is 1°.
Gem-dihalide (alkylidene halide): both X on one carbon. Vic-dihalide (alkylene dihalide): X on adjacent carbons.
IUPAC: halogen is a prefix (fluoro, chloro, bromo, iodo) with the same rank as alkyl groups; number from the end that gives the lowest locants, then go alphabetical.
Common names: alkyl group + halide (isopropyl chloride, sec-butyl bromide, tert-butyl chloride).
C–X is polar: Cδ+ and Xδ−; the carbon is the target of nucleophiles.
Down the group F → I: bond length rises, bond enthalpy falls, polarity falls.
Reactivity of R–X towards substitution: RI > RBr > RCl > RF (weakest bond breaks fastest).
Dipole moment order: CH₃Cl > CH₃F > CH₃Br > CH₃I, because μ = charge × distance and F has the shortest bond.
In aryl and vinylic halides, resonance and the sp² carbon make the C–X bond shorter and stronger.
Must-remember table
| Bond in CH₃X | Length (pm) | Enthalpy (kJ mol⁻¹) | μ of CH₃X (D) |
|---|---|---|---|
| C–F | 139 | 452 | 1.85 |
| C–Cl | 178 | 351 | 1.86 (highest) |
| C–Br | 193 | 293 | 1.83 |
| C–I | 214 | 234 (weakest) | 1.64 (lowest) |
Memory aids
"ABV" = sp³ or not: Allylic and Benzylic sit next to the double bond or ring (sp³, reactive); Vinylic sits on it (sp², sluggish).
"Cl Fights Bravely, I Lose": Cl, F, Br, I is the dipole moment order of CH₃X, from highest (Cl) to lowest (I).
"Long bonds break first": C–I is the longest and weakest bond, so RI is the most reactive halide.
"Gem = Same, Vic = Neighbour": gem-dihalide has both X on the same carbon (like twin gems in one ring); vic has them on neighbouring carbons (vicinal).
Concept connections
Hybridisation, bond polarity and dipole moment come from Chemistry Book 3: Chemical Bonding and Molecular Structure.
IUPAC rules, inductive effect and resonance are built in Chemistry Book 14: Some Basic Principles of Organic Chemistry.
Halogen electronegativity and size trends come from Chemistry Book 9: Classification of Elements and Periodicity in Properties.
Practice MCQs: Chapter 1, Level 4 (new NEET pattern)
31. Match List I (compound) with List II (class).
A. CH₂=CH–CH₂Cl
B. C₆H₅CH₂Cl
C. CH₂=CHCl
D. (CH₃)₃CCl
i. Vinylic halide
ii. 3° alkyl halide
iii. Allylic halide
iv. Benzylic halide
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
32. Match List I (common name) with List II (IUPAC name).
A. Isobutyl chloride
B. sec-Butyl chloride
C. tert-Butyl chloride
D. Neopentyl chloride
i. 2-Chloro-2-methylpropane
ii. 1-Chloro-2,2-dimethylpropane
iii. 2-Chlorobutane
iv. 1-Chloro-2-methylpropane
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-i, B-iii, C-iv, D-ii
33. Match List I (formula) with List II (common name).
A. CH₂Cl₂
B. CHI₃
C. CH₃CHCl₂
D. ClCH₂CH₂Cl
i. Iodoform
ii. Ethylene dichloride
iii. Methylene chloride
iv. Ethylidene chloride
(a) A-iv, B-i, C-iii, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-ii, C-iv, D-i (d) A-ii, B-i, C-iv, D-iii
34. Match List I (compound) with List II (type).
A. CH₃CBr₂CH₃
B. CH₃CHBrCH₂Br
C. C₆H₅Cl
D. C₆H₅CH₂CH₂Cl
i. Vic-dihalide
ii. Aryl halide
iii. 1° haloalkane
iv. Gem-dihalide
(a) A-i, B-iv, C-ii, D-iii (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-ii, C-i, D-iii (d) A-iv, B-i, C-ii, D-iii
35. How many of the following statements are correct?
A. The carbon bonded to Cl in chlorobenzene is sp² hybridised.
B. CH₃F has a larger dipole moment than CH₃Cl.
C. The C–I bond is the weakest of the four C–X bonds.
D. The C–Cl bond in vinyl chloride is longer than in ethyl chloride.
(a) One (b) Two (c) Three (d) Four
36. Choose the correct set of statements.
A. 2-Chlorobutane is chiral.
B. Neopentyl bromide is a 3° halide.
C. 1,1-Dichloroethane is a gem-dihalide.
D. In allyl chloride, Cl is attached to an sp² carbon.
(a) A and B only (b) B and D only (c) A, B and C only (d) A and C only
37. How many of the following statements are correct?
A. Bond enthalpy: C–F > C–Cl > C–Br > C–I.
B. Bond length: C–F < C–Cl < C–Br < C–I.
C. Since C–F is the most polar bond, alkyl fluorides are the most reactive alkyl halides.
D. The polarity of the C–X bond decreases from C–F to C–I.
(a) Three (b) Two (c) Four (d) One
38. Choose the correct set of statements.
A. C₄H₉Br has four structural isomers.
B. Exactly one of the C₄H₉Br structural isomers is chiral.
C. C₃H₆Cl₂ has three structural isomers.
D. C₂H₄Cl₂ has two structural isomers.
(a) A and C only (b) B, C and D only (c) A, B and D only (d) A and D only
39. A table gives data for four CH₃X molecules labelled P, Q, R and S.
| Molecule | C–X bond length (pm) | C–X bond enthalpy (kJ mol⁻¹) |
|---|---|---|
| P | 214 | 234 |
| Q | 139 | 452 |
| R | 178 | 351 |
| S | 193 | 293 |
Which identification is correct? (a) P = C–F, S = C–Cl (b) Q = C–I, R = C–Br (c) R = C–Br, S = C–Cl (d) P = C–I, R = C–Cl
40. CH₃Br has a dipole moment of 1.83 D and a C–Br bond length of 193 pm. Treating the bond as two point charges, the charge on each end is about (1 D = 3.336 × 10⁻³⁰ C m, e = 1.602 × 10⁻¹⁹ C) (a) 0.28 e (b) 0.16 e (c) 0.20 e (d) 0.12 e
41. A bar chart shows the dipole moment of CH₃X on the y-axis for X = F, Cl, Br, I (left to right) on the x-axis. Which description of the bars is correct? (a) The bar rises slightly from F to Cl, then falls through Br to I (b) The bars fall steadily from F to I (c) The bars rise steadily from F to I (d) All four bars are equal
Passage for Q42–43. A lab has three unlabelled bottles. Bottle P holds CH₂=CHCH₂Br, bottle Q holds CH₃CH=CHBr and bottle R holds C₆H₅CH₂Br. A student must sort them by the hybridisation of the carbon that carries Br, and then name them.
42. In which bottles is Br bonded to an sp³ carbon? (a) P only (b) P and R (c) Q and R (d) P, Q and R
43. The IUPAC name of the compound in bottle Q is (a) 3-Bromoprop-1-ene (b) 2-Bromoprop-1-ene (c) 1-Bromoprop-1-ene (d) 3-Bromopropene-1
44. How many structural isomers of C₅H₁₁Br contain a stereocentre (are chiral)? (a) 1 (b) 2 (c) 4 (d) 3
45. A compound C₃H₅Cl has Cl on an sp² carbon and shows geometrical (cis–trans) isomerism. The compound is (a) 1-Chloroprop-1-ene (b) 2-Chloroprop-1-ene (c) 3-Chloroprop-1-ene (d) Chlorocyclopropane
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | Allyl = allylic, benzyl = benzylic, vinyl = vinylic, tert-butyl = 3°. |
| 32 | a | Isobutyl = 1-chloro-2-methylpropane; sec-butyl = 2-chlorobutane; tert-butyl = 2-chloro-2-methylpropane; neopentyl = 1-chloro-2,2-dimethylpropane. |
| 33 | b | CH₂Cl₂ methylene chloride; CHI₃ iodoform; CH₃CHCl₂ ethylidene chloride; ClCH₂CH₂Cl ethylene dichloride. |
| 34 | d | Both Br on C-2 = gem; Br on C-1 and C-2 = vic; Cl on ring = aryl; Cl on CH₂ two carbons from the ring = 1° (not benzylic). |
| 35 | b | A and C are true. CH₃Cl (1.86 D) beats CH₃F (1.85 D); the vinylic C–Cl bond is shorter. |
| 36 | d | Neopentyl bromide is 1°; allylic Cl sits on an sp³ carbon. |
| 37 | a | A, B, D true. Reactivity depends on bond strength, so RF is the least reactive. |
| 38 | c | C₃H₆Cl₂ has four isomers (1,1-, 1,2-, 1,3-, 2,2-). Only 2-bromobutane is chiral among C₄H₉Br. |
| 39 | d | Longest, weakest bond (P) is C–I; 178 pm, 351 kJ mol⁻¹ (R) is C–Cl. |
| 40 | c | δ = μ/d = (1.83 × 3.336 × 10⁻³⁰)/(193 × 10⁻¹²) = 3.16 × 10⁻²⁰ C = 0.197 e ≈ 0.20 e. |
| 41 | a | 1.85 → 1.86 → 1.83 → 1.64 D: a small peak at Cl, then a fall. |
| 42 | b | P is allylic and R is benzylic (both sp³); Q is vinylic (sp²). |
| 43 | c | Br on C-1, double bond from C-1: 1-bromoprop-1-ene. |
| 44 | d | 2-Bromopentane, 1-bromo-2-methylbutane and 2-bromo-3-methylbutane have stereocentres. |
| 45 | a | ClCH=CHCH₃ has two different groups on each C=C carbon; 2-chloroprop-1-ene has two H on C-1; 3-chloro is allylic (sp³). |