Chapter 5: Elimination and Other Reactions
What you will learn
How alcoholic KOH removes HX from a haloalkane to give an alkene (dehydrohalogenation).
The Saytzeff (Zaitsev) rule for predicting the major alkene.
How to decide between substitution and elimination from the substrate, the reagent, the solvent and the temperature.
How haloalkanes react with metals: Grignard reagents, the Wurtz reaction, and with haloarenes, the Wurtz–Fittig and Fittig reactions.
How to read and use a reaction map of haloalkane conversions.
5.1 Dehydrohalogenation: β-elimination
Heat a haloalkane with alcoholic KOH and an alkene forms. A hydrogen leaves from the carbon next to the C–X carbon, and X leaves from the C–X carbon itself.
Name the carbons first. The carbon that holds X is the α-carbon. Any carbon bonded to it is a β-carbon. Hydrogens on β-carbons are β-hydrogens. Because a β-hydrogen is removed, the reaction is called β-elimination.
The base (OH⁻ or the ethoxide ion present in alcoholic KOH) pulls off the β-H. The C–H bonding pair swings in to form the C=C. At the same time, X leaves with its bonding pair.
A halide with no β-hydrogen cannot do this. CH₃Br has no β-carbon at all. Neopentyl bromide, (CH₃)₃CCH₂Br, has a β-carbon, but that carbon carries no hydrogen.
Ease of dehydrohalogenation follows the order:
A 3° halide has more β-hydrogens to remove and gives a more substituted, more stable alkene.
5.2 Saytzeff rule
When a halide has two or more different kinds of β-hydrogen, more than one alkene can form. The Saytzeff (Zaitsev) rule predicts the main one:
The major alkene is the more substituted one, that is, the alkene with more alkyl groups on the C=C carbons.
A more substituted alkene is more stable, because hyperconjugation with the alkyl groups spreads out the π electrons.
But-2-ene has two alkyl groups on its double bond. But-1-ene has only one. So but-2-ene wins, roughly 80 : 20. Within but-2-ene, the trans form is more stable than cis, because the two CH₃ groups are farther apart.
A simple rule to apply it: "The poor get poorer." The β-carbon that already has fewer hydrogens loses one more.
5.3 Substitution or elimination?
OH⁻ and RO⁻ can act two ways. As a nucleophile, they attack carbon (substitution). As a base, they remove a β-H (elimination). Both reactions compete. Four things tip the balance.
| Factor | Favours substitution | Favours elimination |
|---|---|---|
| Substrate | CH₃X, 1° | 3° (then 2°) |
| Reagent | Good nucleophile, weak base (I⁻, CN⁻) | Strong or bulky base ((CH₃)₃CO⁻K⁺) |
| Solvent | Water (aqueous KOH) | Alcohol (alcoholic KOH) |
| Temperature | Lower | Higher |
In short:
Aqueous KOH with a 1° halide gives an alcohol (substitution).
Alcoholic KOH on heating gives an alkene (elimination).
A 3° halide with a strong base such as ethoxide gives mostly alkene, because SN2 is blocked and the base easily finds one of nine β-hydrogens.
A bulky base like potassium tert-butoxide cannot reach a carbon to substitute. It simply grabs an exposed β-H.
Think of a crowded Mumbai local train. A slim passenger (a small nucleophile) can squeeze into the centre seat (the carbon). A person with a big backpack (bulky base) cannot, so they take whatever is near the door (a β-H on the outside).
5.4 Reaction with magnesium: Grignard reagents
A haloalkane reacts with magnesium turnings in dry ether to give an alkylmagnesium halide, the Grignard reagent. Victor Grignard won the 1912 Nobel Prize for this work.
In the C–Mg bond, carbon is more electronegative than magnesium. So carbon carries a partial negative charge. The Mg–X bond is largely ionic. Grignard reagents behave like a source of the carbanion R⁻, a very strong base and good nucleophile.
They react with any compound that has an acidic H: water, alcohols, amines, even terminal alkynes. Each gives the alkane.
That is why the apparatus, ether and halide must all be perfectly dry. Even moisture from the air on a humid monsoon day can destroy the reagent. The reaction is also a handy way to make an alkane, or a deuterated alkane with D₂O:
A halide that has an acidic group in the same molecule, such as HO–CH₂CH₂–Br, cannot form a stable Grignard reagent. The reagent would destroy itself.
Grignard reagents are the starting point for many syntheses of alcohols, acids and other compounds. Those reactions are covered in Book 17.
5.5 Reaction with sodium: Wurtz reaction
Two molecules of a haloalkane react with sodium in dry ether. The two alkyl groups join, giving an alkane with double the carbons.
The Wurtz reaction makes symmetrical alkanes with an even number of carbons in good yield.
If two different halides are used (R–X and R′–X), three alkanes form: R–R, R′–R′ and R–R′. They are hard to separate. So odd-carbon alkanes like propane are not made well this way.
Methane cannot be made by Wurtz reaction at all, since the product always has at least two carbons.
3° halides give poor yields, because elimination competes.
5.6 Haloarenes with sodium: Wurtz–Fittig and Fittig reactions
Wurtz–Fittig reaction. An aryl halide and an alkyl halide react with sodium in dry ether. An alkylbenzene forms.
Some ethane and biphenyl also form as side products.
Fittig reaction. Two aryl halides join, giving a biaryl.
| Reaction | Halides used | Metal, solvent | Product |
|---|---|---|---|
| Grignard | R–X (or Ar–X) | Mg, dry ether | RMgX |
| Wurtz | R–X + R–X | Na, dry ether | R–R (alkane) |
| Wurtz–Fittig | Ar–X + R–X | Na, dry ether | Ar–R (alkylbenzene) |
| Fittig | Ar–X + Ar–X | Na, dry ether | Ar–Ar (biaryl) |
5.7 Reduction
Haloalkanes can be reduced to alkanes. Common reagents are LiAlH₄, Zn with HCl, or H₂ over Pd.
5.8 The haloalkane reaction map
The figure gathers Chapters 4 and 5 into one picture. Use it for last-minute revision: cover the products, read the reagent, and say the product aloud.

Grey arrows are substitutions, the upward arrow is elimination, and the lower arrows are reactions with metals; note how the K and Ag salts of CN⁻ and NO₂⁻ sit on opposite sides.
Worked examples
Worked example 5.1: 2-Bromobutane is heated with alcoholic KOH. Write all the alkenes formed and name the major one.
Solution: C-1 and C-3 are both β-carbons. Losing H from C-1 gives but-1-ene. Losing H from C-3 gives but-2-ene (cis and trans). By Saytzeff's rule, but-2-ene is major, and trans-but-2-ene is the most abundant single product.
Worked example 5.2: Predict the major product when 2-bromo-2-methylbutane, (CH₃)₂CBrCH₂CH₃, is heated with ethanolic KOH.
Solution: β-Hydrogens lie on the two CH₃ groups and on the CH₂. Removing H from CH₂ gives (CH₃)₂C=CHCH₃, 2-methylbut-2-ene, with three alkyl groups on the double bond. Removing H from a CH₃ gives CH₂=C(CH₃)CH₂CH₃, 2-methylbut-1-ene, with two. The major product is 2-methylbut-2-ene.
Worked example 5.3: How many alkenes, counting geometrical isomers, form when 2-bromopentane undergoes dehydrohalogenation? Which is major?
Solution: Pent-1-ene (from C-1 H) and pent-2-ene (from C-3 H). Pent-2-ene has cis and trans forms. So three alkenes form in total. trans-Pent-2-ene is the major product: it is more substituted than pent-1-ene and less strained than the cis form.
Worked example 5.4: Predict the main product: (i) 1-bromopropane with aqueous KOH (ii) 1-bromopropane with alcoholic KOH on heating (iii) 2-bromo-2-methylpropane with sodium ethoxide in ethanol on heating.
Solution: (i) Propan-1-ol, by SN2. (ii) Propene, by elimination. (iii) 2-Methylpropene. The 3° halide blocks SN2, and the strong base removes a β-H.
Worked example 5.5: 14.2 g of CH₃I is converted fully into CH₃MgI, which is then treated with water. What volume of methane forms at STP? (CH₃I = 142 g mol⁻¹)
Solution: Moles of CH₃I = 14.2 / 142 = 0.100 mol. Each mole gives 1 mol CH₃MgI and then 1 mol CH₄. Volume = 0.100 × 22.4 = 2.24 L.
Worked example 5.6: A mixture of bromomethane and bromoethane is treated with sodium in dry ether. Name all the alkanes formed.
Solution: CH₃–CH₃ (ethane, from two methyl groups), CH₃CH₂–CH₂CH₃ (butane, from two ethyl groups) and CH₃–CH₂CH₃ (propane, cross product). This mixture is why Wurtz is a poor route to propane.
Worked example 5.7: Which alkyl halide, by Wurtz reaction alone, gives 2,5-dimethylhexane?
Solution: Split the product at its centre. 2,5-Dimethylhexane is (CH₃)₂CHCH₂–CH₂CH(CH₃)₂. Each half is an isobutyl group. So the halide is 1-bromo-2-methylpropane, (CH₃)₂CHCH₂Br.
Worked example 5.8: Bromobenzene and bromoethane are treated together with sodium in dry ether. Give the main product and two side products.
Solution: Main product: ethylbenzene, C₆H₅CH₂CH₃ (Wurtz–Fittig). Side products: butane (two ethyl groups joined) and biphenyl (two phenyl groups joined).
Quick revision
β-Elimination: alc. KOH, heat; H from β-carbon and X from α-carbon leave; an alkene forms.
Saytzeff: the more substituted alkene is major. Ease: 3° > 2° > 1°.
Aqueous KOH → substitution (alcohol); alcoholic KOH + heat → elimination (alkene).
3° halides and bulky bases favour elimination; 1° halides and good nucleophiles favour substitution.
Grignard: R–X + Mg in dry ether → RMgX; C is δ−; water converts it to R–H.
Wurtz: 2RX + 2Na → R–R. Mixed halides give three products. No methane.
Wurtz–Fittig: ArX + RX + 2Na → Ar–R. Fittig: 2ArX + 2Na → Ar–Ar.
NEET traps
Choosing the less substituted alkene as major. Count the alkyl groups on the C=C.
Forgetting the cis and trans forms when asked for the total number of alkenes.
Writing an alcohol as the product with alcoholic KOH, or an alkene with aqueous KOH.
Preparing a Grignard reagent in ethanol or with a wet halide. Any O–H destroys it.
Thinking the carbon in RMgX is δ+. It is δ−.
Expecting a single product from Wurtz reaction of two different alkyl halides.
Practice MCQs: Chapter 5
Level 1: Concept check
1. Heating a haloalkane with alcoholic KOH mainly brings about (a) substitution (b) elimination (c) addition (d) reduction
2. According to the Saytzeff rule, the major alkene in dehydrohalogenation is (a) the more substituted alkene (b) the less substituted alkene (c) always a terminal alkene (d) always the cis alkene
3. A Grignard reagent is prepared by treating an alkyl halide with (a) Na in dry ether (b) Mg in water (c) Mg in dry ether (d) Zn in HCl
4. Bromoethane treated with sodium in dry ether gives (a) ethane (b) ethene (c) propane (d) butane
5. Chlorobenzene heated with sodium in dry ether gives (a) toluene (b) biphenyl (c) benzene (d) diphenylmethane
6. CH₃MgBr reacts with water to give (a) methanol (b) ethane (c) methane (d) dimethyl ether
7. The Wurtz–Fittig reaction joins (a) an aryl halide and an alkyl halide (b) two alkyl halides (c) two aryl halides (d) an alkyl halide and magnesium
8. In β-elimination, the atoms removed are (a) two H atoms from the α-carbon (b) X from the β-carbon and H from the α-carbon (c) X and H from the same carbon (d) H from the β-carbon and X from the α-carbon
9. Grignard reagents must be prepared under anhydrous conditions because they (a) explode in air (b) dissolve in water (c) react with water to form alkanes (d) form ethers with water
10. The major product when 2-bromobutane is heated with alcoholic KOH is (a) butan-2-ol (b) but-1-ene (c) butane (d) but-2-ene
Level 2: NEET standard
11. 2-Bromo-2-methylbutane on heating with alcoholic KOH gives mainly (a) 2-methylbut-1-ene (b) 2-methylbut-2-ene (c) 3-methylbut-1-ene (d) 2-methylbutan-2-ol
12. Counting geometrical isomers, the number of alkenes formed by dehydrohalogenation of 2-bromopentane is (a) 2 (b) 4 (c) 3 (d) 1
13. The ease of dehydrohalogenation of alkyl halides follows the order (a) 3° > 2° > 1° (b) 1° > 2° > 3° (c) 2° > 3° > 1° (d) 1° > 3° > 2°
14. 1-Bromopropane gives product X with aqueous KOH and product Y with alcoholic KOH on heating. X and Y are (a) propene and propan-1-ol (b) propan-2-ol and propene (c) propan-1-ol and propan-2-ol (d) propan-1-ol and propene
15. Toluene can be prepared from bromobenzene by (a) Fittig reaction with Na (b) Wurtz–Fittig reaction with CH₃Br and Na (c) Grignard reaction with water (d) Swarts reaction
16. CH₃MgI reacts with D₂O to give (a) CH₃D (b) CH₄ (c) CH₃OD (d) CD₄
17. A mixture of CH₃Br and C₂H₅Br treated with Na in dry ether gives (a) propane only (b) ethane and butane only (c) ethane, propane and butane (d) methane and ethane
18. Potassium tert-butoxide, (CH₃)₃CO⁻K⁺, reacting with a 2° alkyl bromide favours (a) SN2 substitution (b) SN1 substitution (c) free radical addition (d) elimination
19. Which alkane cannot be prepared in good yield by the Wurtz reaction? (a) Ethane (b) Butane (c) Propane (d) Hexane
20. In a Grignard reagent R–MgX, the carbon attached to Mg (a) carries a partial negative charge (b) carries a partial positive charge (c) is a free radical (d) is a carbocation
21. 2,5-Dimethylhexane can be prepared by Wurtz reaction from (a) 2-bromobutane (b) 1-bromo-2-methylpropane (c) 2-bromo-2-methylpropane (d) 1-bromobutane
22. Which of the following cannot undergo dehydrohalogenation? (a) CH₃CH₂Br (b) (CH₃)₂CHBr (c) CH₃CH₂CH₂Br (d) (CH₃)₃CCH₂Br
Level 3: Challenge
23. 14.2 g of CH₃I is converted to CH₃MgI, which is then treated with excess water. The volume of methane at STP is (CH₃I = 142 g mol⁻¹) (a) 1.12 L (b) 2.24 L (c) 4.48 L (d) 22.4 L
24. The major product of heating 2-bromo-3-methylbutane with alcoholic KOH is (a) 3-methylbut-1-ene (b) 2-methylbut-1-ene (c) 2-methylbut-2-ene (d) 3-methylbutan-2-ol
25. Which halide gives an alkene as the major product with sodium ethoxide in ethanol? (a) (CH₃)₃CBr (b) CH₃Br (c) CH₃CH₂Br (d) C₆H₅CH₂Br
26. A stable Grignard reagent cannot be prepared from (a) CH₃CH₂Br (b) C₆H₅Br (c) HOCH₂CH₂Br (d) CH₃I
27. Which bromide gives only one alkene (with no geometrical isomers) on dehydrohalogenation? (a) 2-Bromopentane (b) 3-Bromopentane (c) 2-Bromo-2-methylbutane (d) 1-Bromo-3-methylbutane
28. Tertiary alkyl halides give poor yields in the Wurtz reaction mainly because (a) they do not react with sodium (b) elimination competes and gives alkenes (c) they form Grignard reagents instead (d) they are gases
29. Assertion (A): Grignard reagents are prepared under strictly anhydrous conditions. Reason (R): Grignard reagents react with water to form alkanes. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Dehydrohalogenation of 2-bromobutane gives but-1-ene as the major product. Statement II: Chlorobenzene reacts with sodium in dry ether to give biphenyl. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | b | Alcoholic KOH acts as a base: β-elimination. |
| 2 | a | More alkyl groups on C=C, more stable. |
| 3 | c | R–X + Mg in dry ether → RMgX. |
| 4 | d | Two ethyl groups join: C₄H₁₀. |
| 5 | b | Fittig reaction gives Ar–Ar. |
| 6 | c | R⁻ takes H⁺ from water: RH. |
| 7 | a | Ar–X + R–X + 2Na → Ar–R. |
| 8 | d | That is the definition of β-elimination. |
| 9 | c | Water protonates the carbanion-like carbon. |
| 10 | d | Saytzeff product, more substituted. |
| 11 | b | Trisubstituted alkene is major. |
| 12 | c | Pent-1-ene, cis- and trans-pent-2-ene. |
| 13 | a | More β-H, more stable alkene. |
| 14 | d | Aqueous: substitution; alcoholic: elimination. |
| 15 | b | Ph–Br + CH₃–Br + 2Na → Ph–CH₃. |
| 16 | a | D replaces MgI on carbon. |
| 17 | c | Two like couplings and one cross coupling. |
| 18 | d | Bulky strong base removes β-H. |
| 19 | c | Needs CH₃X + C₂H₅X: mixture forms. |
| 20 | a | C more electronegative than Mg. |
| 21 | b | Two isobutyl halves join. |
| 22 | d | β-Carbon is C(CH₃)₃ with no H. |
| 23 | b | 0.100 mol CH₄ × 22.4 L. |
| 24 | c | H lost from C-3 gives trisubstituted alkene. |
| 25 | a | 3°: SN2 blocked, E favoured. |
| 26 | c | The O–H destroys RMgX. |
| 27 | d | Only 3-methylbut-1-ene can form. |
| 28 | b | Elimination competes with coupling. |
| 29 | a | Reaction with water explains the need. |
| 30 | d | But-2-ene is major; Fittig gives biphenyl. |
Chapter 5 revision sheet
One-page summary
β-Elimination (dehydrohalogenation): alcoholic KOH, heat; H leaves from the β-carbon and X from the α-carbon; an alkene forms.
Ease of dehydrohalogenation: 3° > 2° > 1° halide.
Saytzeff (Zaitsev) rule: the major alkene is the more substituted one (more alkyl groups on C=C), because it is more stable.
2-Bromobutane → but-2-ene (major, about 80%) + but-1-ene (minor).
Substitution vs elimination: 1° halide, aqueous base, low temperature → substitution; 3° halide, alcoholic or bulky strong base, heat → elimination.
Grignard reagent: R–X + Mg in dry ether → R–MgX. The C–Mg bond is polar with Cδ−, so R behaves like a carbanion.
Any compound with acidic H (water, alcohols, NH₃, amines, terminal alkynes) destroys R–MgX and gives R–H.
Wurtz: 2R–X + 2Na (dry ether) → R–R + 2NaX; doubles the carbon count. Two different halides give a mixture of three alkanes.
Wurtz–Fittig: Ar–X + R–X + 2Na → Ar–R (alkylbenzene). Fittig: 2Ar–X + 2Na → Ar–Ar (biphenyl).
Reduction: R–X → R–H with Zn/HCl, H₂/Pd or LiAlH₄.
A halide with no β-H (CH₃X, neopentyl halide) cannot undergo β-elimination.
Must-remember table
| Reaction | Reagent | Product from the example |
|---|---|---|
| Dehydrohalogenation | Alc. KOH, heat | CH₃CHBrCH₂CH₃ → CH₃CH=CHCH₃ (major) |
| Grignard formation | Mg, dry ether | C₂H₅Br → C₂H₅MgBr |
| Grignard + active H | H₂O, ROH, NH₃ | CH₃MgBr → CH₄ |
| Wurtz | Na, dry ether | 2CH₃Br → C₂H₆ |
| Wurtz–Fittig | Na, dry ether | C₆H₅Br + CH₃Br → C₆H₅CH₃ |
| Fittig | Na, dry ether | 2C₆H₅Cl → C₆H₅–C₆H₅ |
| Reduction | Zn/HCl, H₂/Pd | R–X → R–H |
Memory aids
"Rich get richer" (Saytzeff): the double bond goes to the β-carbon that already has fewer H, giving the more substituted alkene.
"Alcoholic KOH Always Leaves (eliminates); Aqueous KOH Adds OH (substitutes)".
"Grignard hates water": any O–H, N–H or ≡C–H turns R–MgX into R–H.
"Wurtz Wraps two alkyls, Fittig Fuses two rings, Wurtz–Fittig is the mixed marriage".
Concept connections
Alkene stability and Saytzeff products link to Chemistry Book 15: Hydrocarbons, where Wurtz is also a route to alkanes.
Grignard reagents add to aldehydes, ketones and CO₂ in Chemistry Book 17: Organic Compounds Containing Oxygen.
Mole calculations for product mass and gas volume use Chemistry Book 1: Some Basic Concepts in Chemistry.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match List I (reaction) with List II (organic product).
A. C₂H₅Br + Na, dry ether
B. C₆H₅Cl + CH₃Cl + Na, dry ether
C. C₆H₅Cl + Na, dry ether
D. CH₃MgBr + H₂O
i. Methane
ii. Biphenyl
iii. Butane
iv. Toluene
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-ii, B-iv, C-iii, D-i
32. Match List I (halide heated with alcoholic KOH) with List II (major alkene).
A. 2-Bromobutane
B. 2-Bromo-2-methylbutane
C. 1-Bromopropane
D. 2-Chloro-2-methylpropane
i. 2-Methylpropene
ii. Propene
iii. 2-Methylbut-2-ene
iv. But-2-ene
(a) A-iv, B-iii, C-ii, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-iv, B-iii, C-i, D-ii
33. Match List I (reactants) with List II (hydrocarbon formed).
A. C₂H₅MgBr + H₂O
B. CH₃MgI + NH₃
C. C₆H₅MgBr + H₂O
D. (CH₃)₂CHMgBr + CH₃OH
i. Propane
ii. Benzene
iii. Methane
iv. Ethane
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-ii, C-iii, D-i (d) A-i, B-iii, C-ii, D-iv
34. Match List I (reagent on R–X) with List II (type of reaction).
A. Alcoholic KOH, heat
B. Aqueous KOH
C. Mg in dry ether
D. Zn and dilute HCl
i. Reduction to an alkane
ii. Formation of an organometallic compound
iii. Nucleophilic substitution
iv. β-Elimination
(a) A-iii, B-iv, C-ii, D-i (b) A-iv, B-iii, C-i, D-ii (c) A-ii, B-iii, C-iv, D-i (d) A-iv, B-iii, C-ii, D-i
35. How many of the following statements are correct?
A. Grignard reagents are made in dry ether because water destroys them.
B. In R–MgX, the carbon bonded to Mg carries a partial positive charge.
C. The Wurtz reaction is a good method for alkanes with an odd number of carbons, using two different alkyl halides.
D. The Wurtz reaction doubles the number of carbons in the alkyl group.
(a) One (b) Two (c) Three (d) Four
36. Choose the correct set of statements.
A. Dehydrohalogenation removes H from the β-carbon.
B. Ease of dehydrohalogenation is 3° > 2° > 1°.
C. The Saytzeff rule predicts the less substituted alkene as the major product.
D. A 3° halide heated with a strong base gives mainly an alkene.
(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D
37. How many of the following statements are correct?
A. 2-Bromo-2-methylpropane has no β-hydrogen.
B. 1-Bromo-2,2-dimethylpropane cannot undergo β-elimination, because its β-carbon carries no H.
C. Grignard reagents do not react with terminal alkynes.
D. The Fittig reaction joins an aryl halide with an alkyl halide.
(a) Two (b) Three (c) Four (d) One
38. Choose the correct set of statements.
A. A 1° halide with aqueous KOH at low temperature mainly undergoes substitution.
B. High temperature and alcoholic KOH favour elimination.
C. The ethoxide ion acts only as a nucleophile, never as a base.
D. Tertiary halides with alcoholic KOH give mainly alkenes.
(a) A and B only (b) C and D only (c) A, B and D only (d) A, B, C and D
39. 2-Bromobutane is heated with alcoholic KOH. Gas chromatography shows two alkenes.
| Product | Share | Alkyl groups on the C=C |
|---|---|---|
| P | about 80% | Two |
| Q | about 20% | One |
Which identification is correct? (a) P = but-1-ene, Q = but-2-ene (b) P = butan-2-ol, Q = but-1-ene (c) P = butane, Q = but-2-ene (d) P = but-2-ene, Q = but-1-ene
40. 21.8 g of bromoethane (M = 109 g mol⁻¹) reacts completely with excess sodium in dry ether. The mass of butane formed is (a) 11.6 g (b) 5.8 g (c) 2.9 g (d) 8.7 g
41. 0.37 g of an alcohol C₄H₉OH (M = 74 g mol⁻¹) is added to excess CH₃MgI. What volume of methane is released at STP (22.4 L mol⁻¹)? (a) 224 mL (b) 56 mL (c) 112 mL (d) 448 mL
Passage for Q42–43. A student must make propane from 1-bromopropane. Her plan is to convert the halide into an organometallic compound and then destroy it with a proton source. Her partner suggests heating the halide with sodium metal in dry ether instead.
42. Which sequence carries out the student's plan? (a) Mg in dry ether, then H₂O (b) Mg in water directly (c) Na in dry ether, then H₂O (d) Alcoholic KOH, then H₂O
43. What hydrocarbon does the partner's method give? (a) Propane (b) Propene (c) Butane (d) Hexane
44. 3-Bromohexane is heated with alcoholic KOH. Counting cis and trans forms separately, how many alkenes can form? (a) 2 (b) 3 (c) 4 (d) 5
45. A halide C₅H₁₁Br is optically active. With alcoholic KOH it gives only one alkene, 2-methylbut-1-ene. The halide is (a) 2-Bromo-2-methylbutane (b) 1-Bromo-2-methylbutane (c) 2-Bromo-3-methylbutane (d) 1-Bromo-3-methylbutane
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | Wurtz → butane; Wurtz–Fittig → toluene; Fittig → biphenyl; Grignard + water → methane. |
| 32 | a | Saytzeff alkene each time; 1-bromopropane and the 3° chloride have only one kind of β-H. |
| 33 | b | R–MgX + any active H gives R–H: ethane, methane, benzene, propane. |
| 34 | d | Alc. KOH eliminates; aq. KOH substitutes; Mg forms RMgX; Zn/HCl reduces. |
| 35 | b | A and D true. Carbon in C–Mg is δ−; two different halides give a mixture of three alkanes. |
| 36 | a | Saytzeff favours the more substituted alkene, so C is false. |
| 37 | d | Only B is true. (CH₃)₃CBr has nine β-H; RMgX takes the acidic H of terminal alkynes; Fittig joins two aryl halides. |
| 38 | c | Ethoxide is a strong base as well as a nucleophile. |
| 39 | d | The disubstituted alkene (but-2-ene) is major by Saytzeff. |
| 40 | b | 21.8/109 = 0.20 mol C₂H₅Br → 0.10 mol C₄H₁₀ × 58 = 5.8 g. |
| 41 | c | 0.37/74 = 0.005 mol OH → 0.005 mol CH₄ × 22 400 mL = 112 mL. |
| 42 | a | RMgX must be made in dry ether; water is added only afterwards. |
| 43 | d | Wurtz joins two propyl groups: C₃ + C₃ = hexane. |
| 44 | c | Loss of H from C-2 gives hex-2-ene (cis, trans); from C-4 gives hex-3-ene (cis, trans). |
| 45 | b | Only C-2 is β and it bears one H, giving CH₂=C(CH₃)CH₂CH₃; C-2 is also a stereocentre. |