Chapter 5 of 10 · 21 min read

Chapter 3: Physical Properties

What you will learn

  • The physical state, colour and smell of common halogen compounds.

  • Why haloalkanes boil higher than alkanes, and how boiling point changes with the halogen, the chain length and branching.

  • How density changes with the halogen and the number of halogen atoms.

  • Why haloalkanes barely dissolve in water but mix well with organic solvents.

  • Why p-dichlorobenzene melts far higher than its o- and m- isomers, and how to estimate dipole moments of dichlorobenzenes.

3.1 State, colour and smell

The smallest members are gases at room temperature: CH₃F, CH₃Cl, CH₃Br and C₂H₅Cl. Most higher members are liquids, and some heavier ones are solids.

Pure haloalkanes are colourless. Bromides and iodides slowly turn brown or violet in light. Light breaks the weak C–Br or C–I bond and frees a little Br₂ or I₂. That is why iodoalkanes are stored in brown bottles, like many medicines at your local chemist.

Many volatile halogen compounds have a sweet smell. Chloroform is the classic example.

3.2 Boiling points

Haloalkanes boil at higher temperatures than alkanes of similar size. Two reasons work together.

  1. The C–X bond is polar, so molecules attract each other by dipole–dipole forces.

  2. Halogen atoms are heavy and have many electrons. This raises the London (dispersion) forces.

Compare chloroethane (molar mass 64.5 g mol⁻¹) with butane (58 g mol⁻¹). Their masses are close. Yet chloroethane boils at about 12 °C and butane at about −0.5 °C.

Effect of the halogen. For the same alkyl group, boiling point rises with the size and mass of X.

R−I>R−Br>R−Cl>R−F\mathrm{R{-}I > R{-}Br > R{-}Cl > R{-}F}
CompoundBoiling point (°C, approx.)
CH₃F−78
CH₃Cl−24
CH₃Br4
CH₃I42

Larger halogens carry bigger, softer electron clouds. These are easily polarised, so London forces grow strongly from F to I. That beats the small fall in dipole moment.

Effect of chain length. In a series such as 1-chloroalkanes, boiling point rises as the chain grows. More carbons means more surface and more dispersion forces.

Effect of the number of halogens. Boiling point rises with each extra halogen.

CompoundBoiling point (°C, approx.)Density (g mL⁻¹, approx.)
CH₂Cl₂401.34
CHCl₃611.49
CCl₄771.59

CCl₄ has zero dipole moment, yet it boils above CHCl₃. Its larger mass and electron count give stronger dispersion forces.

Effect of branching. Among isomers, more branching means a lower boiling point. A branched molecule is more compact, almost spherical. It touches its neighbours over a smaller area, so van der Waals forces are weaker. Think of a ball of string against a laid-out string: the laid-out one touches far more of what is near it.

Isomer of C₄H₉BrStructureBoiling point (K, approx.)
1-BromobutaneCH₃CH₂CH₂CH₂Br375
2-BromobutaneCH₃CH₂CHBrCH₃364
2-Bromo-2-methylpropane(CH₃)₃CBr346

3.3 Density

Density rises with the mass of the halogen and with the number of halogen atoms.

CompoundDensity (g mL⁻¹, approx.)
n-C₃H₇Cl0.89
n-C₃H₇Br1.34
n-C₃H₇I1.75

Bromo, iodo and polychloro compounds are denser than water. Shake chloroform with water and it settles as the lower layer. 1-Chloropropane, being lighter than water, floats on top.

3.4 Solubility

Haloalkanes are only very slightly soluble in water, even though they are polar.

To dissolve, a haloalkane molecule must push apart water molecules. That means breaking hydrogen bonds between water molecules, which costs energy. The new attractions between haloalkane and water are weak dipole–dipole forces. They release less energy than was spent. So dissolving is not favoured.

In organic solvents such as ether or benzene, the old and new attractions are of similar strength. So haloalkanes mix freely with them. Chloroform and CCl₄ are themselves used as solvents for fats, oils and waxes.

3.5 Haloarenes: melting points and dipole moments

Haloarenes are colourless liquids or crystalline solids. Their boiling points rise with molar mass, as for haloalkanes.

The three dichlorobenzenes show a pattern NEET asks again and again.

IsomerMelting point (K, approx.)Boiling point (K, approx.)Dipole moment
o-Dichlorobenzene256453Largest
m-Dichlorobenzene249446Smaller
p-Dichlorobenzene323447Zero
  • Boiling points are close. The isomers have the same mass and similar forces in the liquid.

  • The para isomer melts about 70 K higher. It is symmetrical and packs neatly into a crystal lattice. Breaking a well-packed lattice takes more energy. That is why p-dichlorobenzene is a solid at room temperature and is used in moth balls and toilet cubes.

Dipole moments by vector addition. Treat each C–Cl bond moment as a vector of size μ. Two equal vectors at angle θ add to:

μresult=2μcos⁡(θ2)\mu_{\text{result}} = 2\mu\cos\left(\frac{\theta}{2}\right)

For ortho, θ = 60°, so the result is √3 × μ. For meta, θ = 120°, so the result equals μ. For para, θ = 180°, so the two cancel to zero.

Chlorobenzene versus chloromethane. Chlorobenzene has a dipole moment of about 1.7 D, lower than 1.86 D for CH₃Cl. The sp² ring carbon is more electronegative than an sp³ carbon, so it pulls back on the bonding pair. Resonance also pushes Cl lone pair density into the ring, partly opposing the C→Cl pull.

Worked examples

Worked example 3.1: Arrange CH₃Cl, CH₃F, CH₃I and CH₃Br in increasing boiling point.

Solution: CH₃F < CH₃Cl < CH₃Br < CH₃I. Boiling point follows the size and polarisability of the halogen.

Worked example 3.2: Arrange 1-bromobutane, 2-bromobutane and 2-bromo-2-methylpropane in decreasing boiling point. Explain.

Solution: 1-Bromobutane > 2-bromobutane > 2-bromo-2-methylpropane. All have the same mass. More branching makes the molecule more compact, reducing surface contact and van der Waals forces.

Worked example 3.3: Chloroethane (M = 64.5) boils at about 12 °C. Butane (M = 58) boils near −0.5 °C. Explain the gap.

Solution: Chloroethane has a polar C–Cl bond, so its molecules also attract by dipole–dipole forces. The heavy Cl atom also adds to dispersion forces. Butane is almost non-polar and has only weak dispersion forces.

Worked example 3.4: A student shakes 1-bromopropane with water in a test tube. Which layer is the organic compound? What if she used 1-chloropropane?

Solution: 1-Bromopropane (density about 1.34 g mL⁻¹) forms the lower layer. 1-Chloropropane (about 0.89 g mL⁻¹) floats as the upper layer.

Worked example 3.5: o-, m- and p-Dichlorobenzene boil within 7 K of one another, but p-dichlorobenzene melts about 70 K higher than the others. Why?

Solution: Boiling depends on forces in the liquid, which are similar for the three isomers. Melting depends on how well molecules pack in the solid. The symmetrical para isomer fits into a tight lattice, so more energy is needed to melt it.

Worked example 3.6: Take the C–Cl bond moment in a chlorobenzene ring as 1.7 D. Estimate the dipole moments of o-, m- and p-dichlorobenzene by vector addition.

Solution:

μo=2(1.7)cos⁡30∘=1.73≈2.9 D\mu_o = 2(1.7)\cos 30^\circ = 1.7\sqrt{3} \approx 2.9\ \mathrm{D}
μm=2(1.7)cos⁡60∘=1.7 D,μp=2(1.7)cos⁡90∘=0\mu_m = 2(1.7)\cos 60^\circ = 1.7\ \mathrm{D}, \qquad \mu_p = 2(1.7)\cos 90^\circ = 0

The measured ortho value is a little lower (about 2.5 D), because the two nearby Cl atoms push each other's electron clouds. The order o > m > p is what NEET tests.

Worked example 3.7: Haloalkanes are polar. Why do they not dissolve well in water?

Solution: Water molecules are held by strong hydrogen bonds. A haloalkane cannot form hydrogen bonds of similar strength with water. The energy released by new haloalkane–water attractions is less than the energy needed to break water–water hydrogen bonds. So solution is not favoured.

Worked example 3.8: CHCl₃ has a dipole moment of about 1.0 D. CCl₄ has none. Yet CCl₄ boils at 77 °C and CHCl₃ at 61 °C. Explain.

Solution: Dipole–dipole attraction is only one part of the intermolecular forces. CCl₄ (M = 154) is heavier than CHCl₃ (M = 119.5) and has more electrons. Its larger dispersion forces outweigh CHCl₃'s dipole–dipole attraction.

Quick revision

  • CH₃F, CH₃Cl, CH₃Br and C₂H₅Cl are gases at room temperature.

  • Bromides and iodides darken in light as X₂ is released.

  • Boiling point: RI > RBr > RCl > RF; rises with chain length and number of halogens; falls with branching.

  • Haloalkanes boil higher than alkanes of similar mass (dipole–dipole plus larger dispersion forces).

  • Bromo, iodo and polychloro compounds are denser than water; density rises from Cl to I and with more halogens.

  • Barely soluble in water; freely soluble in organic solvents.

  • p-Dichlorobenzene: highest melting point (symmetry, packing) and zero dipole moment.

NEET traps

  • Ranking boiling points by dipole moment alone. CCl₄ (μ = 0) boils above CHCl₃.

  • Assuming every haloalkane sinks in water. Lighter chloroalkanes such as 1-chloropropane float.

  • Saying p-dichlorobenzene melts higher because of a larger dipole moment. Its dipole moment is zero; the reason is packing.

  • Giving the most branched isomer the highest boiling point because it "looks bigger".

  • Saying haloalkanes are insoluble because they are non-polar. They are polar; the issue is the energy balance with water's hydrogen bonds.

Practice MCQs: Chapter 3

Level 1: Concept check

1. Which of the following is a gas at room temperature? (a) CH₃Cl (b) CH₃I (c) CHCl₃ (d) CCl₄

2. Which of the following has the highest boiling point? (a) CH₃F (b) CH₃Cl (c) CH₃Br (d) CH₃I

3. Haloalkanes are only slightly soluble in water because (a) they are ionic compounds (b) the energy released by haloalkane–water attractions is less than that needed to break hydrogen bonds in water (c) they react with water (d) they are lighter than water

4. Among the isomers of C₄H₉Br, the lowest boiling point is shown by (a) 1-bromobutane (b) 2-bromobutane (c) 1-bromo-2-methylpropane (d) 2-bromo-2-methylpropane

5. Which liquid is denser than water? (a) 1-Chloropropane (b) Pentane (c) Chloroform (d) Ethanol

6. Which dichlorobenzene has the highest melting point? (a) para (b) ortho (c) meta (d) All are equal

7. A colourless sample of iodoethane turns brownish on standing in light because (a) it absorbs moisture (b) the C–I bond breaks and some iodine is released (c) it polymerises (d) it reacts with glass

8. Compared with alkanes of similar molar mass, haloalkanes have (a) lower boiling points (b) the same boiling points (c) higher boiling points (d) unpredictable boiling points

9. Haloalkanes dissolve readily in (a) water (b) dilute acids only (c) neither water nor organic solvents (d) organic solvents such as ether

10. In the series of 1-chloroalkanes, as the chain gets longer the boiling point (a) decreases (b) increases (c) stays the same (d) first rises, then falls

Level 2: NEET standard

11. The correct increasing order of boiling point is (a) CCl₄ < CHCl₃ < CH₂Cl₂ (b) CHCl₃ < CH₂Cl₂ < CCl₄ (c) CH₂Cl₂ < CHCl₃ < CCl₄ (d) CH₂Cl₂ < CCl₄ < CHCl₃

12. The correct decreasing order of density is (a) n-C₃H₇I > n-C₃H₇Br > n-C₃H₇Cl (b) n-C₃H₇Cl > n-C₃H₇Br > n-C₃H₇I (c) n-C₃H₇Br > n-C₃H₇I > n-C₃H₇Cl (d) all three are equal

13. Which compound has zero dipole moment? (a) o-Dichlorobenzene (b) m-Dichlorobenzene (c) Chlorobenzene (d) p-Dichlorobenzene

14. Chloroethane boils at about 12 °C while butane, of similar mass, boils near −0.5 °C. The main reason is (a) hydrogen bonding in chloroethane (b) dipole–dipole attraction and larger dispersion forces in chloroethane (c) branching in butane (d) ionic character of the C–Cl bond

15. When chloroform is shaken with water and left to stand, (a) the two mix completely (b) chloroform forms the lower layer (c) chloroform forms the upper layer (d) chloroform reacts to give methanol

16. p-Dichlorobenzene melts at a much higher temperature than o-dichlorobenzene because (a) it has a larger dipole moment (b) it forms hydrogen bonds (c) it has a larger molar mass (d) its symmetrical molecules pack better in the crystal

17. The boiling points of o-, m- and p-dichlorobenzene are close to one another because (a) they have equal molar mass and similar forces in the liquid (b) they have equal dipole moments (c) they pack equally well in the solid (d) they all form hydrogen bonds

18. Chlorobenzene has a smaller dipole moment than chloromethane because (a) chlorine is smaller in chlorobenzene (b) the benzene ring is non-polar (c) the sp² carbon is more electronegative and resonance opposes the C→Cl pull (d) chlorobenzene has no lone pairs on Cl

19. The correct decreasing order of boiling point is (a) butane > 1-chlorobutane > 1-bromobutane > 1-iodobutane (b) 1-chlorobutane > 1-bromobutane > 1-iodobutane > butane (c) 1-bromobutane > 1-iodobutane > 1-chlorobutane > butane (d) 1-iodobutane > 1-bromobutane > 1-chlorobutane > butane

20. Which of these has the highest boiling point? (a) CH₃CH₂CH₂CH₂Br (b) (CH₃)₃CBr (c) CH₃CH₂CHBrCH₃ (d) (CH₃)₂CHCH₂Br

21. Which statement is incorrect? (a) Bromoalkanes are generally denser than water. (b) Boiling points of isomeric haloalkanes fall with branching. (c) Haloalkanes dissolve freely in water. (d) Iodoalkanes boil higher than chloroalkanes with the same alkyl group.

22. 2-Bromo-2-methylpropane boils lower than 1-bromobutane because (a) it has a smaller molar mass (b) its compact shape gives less surface contact and weaker van der Waals forces (c) it forms weaker covalent bonds (d) it is more polar

Level 3: Challenge

23. Taking the C–Cl bond moment in a benzene ring as 1.7 D, simple vector addition predicts the dipole moment of o-dichlorobenzene to be about (a) 1.7 D (b) 3.4 D (c) 2.9 D (d) 0 D

24. Using the same 1.7 D bond moment, the predicted dipole moment of m-dichlorobenzene is (a) 1.7 D (b) 2.9 D (c) 0 D (d) 3.4 D

25. Separately, 1-chloropropane and 1-bromopropane are each shaken with water. Which observation is correct? (a) Both form the lower layer. (b) 1-Chloropropane forms the upper layer; 1-bromopropane forms the lower layer. (c) Both form the upper layer. (d) 1-Chloropropane forms the lower layer; 1-bromopropane forms the upper layer.

26. Which pair of compounds has nearly the same boiling point but very different melting points? (a) CH₃Cl and CH₃I (b) 1-bromobutane and 2-bromo-2-methylpropane (c) CHCl₃ and CCl₄ (d) o-dichlorobenzene and p-dichlorobenzene

27. The correct decreasing order of density is (a) CCl₄ > CHCl₃ > CH₂Cl₂ (b) CHCl₃ > CCl₄ > CH₂Cl₂ (c) CCl₄ > CH₂Cl₂ > CHCl₃ (d) CH₂Cl₂ > CHCl₃ > CCl₄

28. CHCl₃ is polar and CCl₄ is non-polar, yet CCl₄ boils at a higher temperature. The best explanation is (a) CCl₄ forms hydrogen bonds (b) CCl₄ has a larger mass and stronger dispersion forces (c) CHCl₃ is branched (d) CCl₄ is ionic

29. Assertion (A): p-Dichlorobenzene has a higher melting point than o-dichlorobenzene. Reason (R): p-Dichlorobenzene has a larger dipole moment than o-dichlorobenzene. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Among isomeric haloalkanes, the unbranched isomer has the highest boiling point. Statement II: Haloalkanes boil at higher temperatures than alkanes of comparable molar mass. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1aCH₃Cl boils near −24 °C.
2dLargest, most polarisable halogen.
3bEnergy balance with water's hydrogen bonds is unfavourable.
4dMost branched, most compact isomer.
5cCHCl₃ density about 1.49 g mL⁻¹.
6aSymmetry gives best crystal packing.
7bWeak C–I bond breaks in light, releasing I₂.
8cPolarity and heavier atoms raise intermolecular forces.
9dSimilar attractions in solute and solvent.
10bMore surface, stronger dispersion forces.
11cMore Cl atoms, higher boiling point.
12aHeavier halogen, greater density.
13dTwo opposite C–Cl moments cancel.
14bNo O–H or N–H, so no hydrogen bonding; polarity helps.
15bCHCl₃ is denser than water.
16dMelting depends on lattice packing.
17aSame mass, similar liquid-phase forces.
18csp² carbon and resonance reduce net dipole.
19dHeavier halogen, higher b.p.; alkane lowest.
20aUnbranched isomer, largest contact area.
21cHaloalkanes are only slightly soluble in water.
22bSame mass; branching lowers contact area.
23c2 × 1.7 × cos 30° ≈ 2.9 D.
24a2 × 1.7 × cos 60° = 1.7 D.
25bDensities about 0.89 and 1.34 g mL⁻¹.
26dSimilar b.p.; para packs better and melts higher.
27aMore Cl atoms, greater density.
28bDispersion forces outweigh the dipole.
29cA is true; p-isomer has zero dipole moment.
30aBoth are standard trends.

Chapter 3 revision sheet

One-page summary

  • CH₃Cl, CH₃Br, C₂H₅Cl and some CFCs are gases at room temperature; higher members are liquids or solids.

  • Pure haloalkanes are colourless; bromides and iodides go brown or violet in light as free halogen forms.

  • Many volatile halogen compounds smell sweet.

  • Haloalkanes boil higher than hydrocarbons of similar molar mass: more polarity and more mass mean stronger intermolecular forces.

  • Same alkyl group: b.p. RI > RBr > RCl > RF (bigger, more polarisable halogen = stronger van der Waals forces).

  • Same halogen: b.p. rises with chain length.

  • Isomers: more branching = smaller surface area = lower b.p. (1-bromobutane 375 K > 2-bromobutane 364 K > 2-bromo-2-methylpropane 346 K).

  • More halogen atoms = higher b.p. and density: CH₂Cl₂ < CHCl₃ < CCl₄.

  • Density rises with the mass of the halogen and the number of halogen atoms; bromo, iodo and polychloro compounds are denser than water.

  • Haloalkanes are only slightly soluble in water: new attractions with water release less energy than is needed to break water's hydrogen bonds.

  • They dissolve well in organic solvents, where old and new attractions are similar.

  • Dichlorobenzenes boil within about 7 K of each other, but the para isomer melts about 70 K higher because its symmetry packs well in the crystal.

  • Dipole moment of dichlorobenzenes: ortho > meta > para (= 0).

μresultant=μ12+μ22+2μ1μ2cos⁡θ\mu_{\text{resultant}} = \sqrt{\mu_1^2 + \mu_2^2 + 2\mu_1\mu_2\cos\theta}

Must-remember table

CompoundValueUse in questions
CH₃F, CH₃Cl, CH₃Br, CH₃Ib.p. −78, −24, 4, 42 °Cb.p. rises F → I
CH₂Cl₂, CHCl₃, CCl₄b.p. 40, 61, 77 °C; density 1.34, 1.49, 1.59 g mL⁻¹Both rise with more Cl
n-C₃H₇Cl, Br, Idensity 0.89, 1.34, 1.75 g mL⁻¹Only the chloride floats on water
C₄H₉Br isomers375, 364, 346 KBranching lowers b.p.
o-, m-, p-C₆H₄Cl₂m.p. 256, 249, 323 K; b.p. 453, 446, 447 KPara melts highest

Memory aids

  • "Heavy, Long, Straight boils Late": heavier halogen, longer chain and unbranched chain all raise the boiling point.

  • "Para Packs Perfectly": the para isomer's symmetry gives the highest melting point.

  • "Iodine Is In the bottom": alkyl iodides and bromides sink in water; small chlorides float.

  • "Water keeps its own friends": water molecules hold their hydrogen bonds instead of mixing with haloalkanes.

Concept connections

  • Van der Waals forces, dipole–dipole attraction and hydrogen bonding are explained in Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Solubility and energy changes on mixing link to Chemistry Book 5: Solutions.

  • Resultant dipole from vector addition uses the same idea as vectors in Physics Book 2: Kinematics.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I (compound) with List II (approximate boiling point).

  • A. CH₃F

  • B. CH₃Cl

  • C. CH₃Br

  • D. CH₃I

  • i. 42 °C

  • ii. −24 °C

  • iii. 4 °C

  • iv. −78 °C

(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-i, B-ii, C-iii, D-iv (d) A-iv, B-ii, C-iii, D-i

32. Match List I (liquid) with List II (approximate density in g mL⁻¹).

  • A. n-C₃H₇Cl

  • B. n-C₃H₇I

  • C. CHCl₃

  • D. CCl₄

  • i. 1.59

  • ii. 0.89

  • iii. 1.75

  • iv. 1.49

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-iii, C-ii, D-i

33. Match List I (observation) with List II (reason).

  • A. Haloalkanes are only slightly soluble in water.

  • B. p-Dichlorobenzene melts higher than its o- and m-isomers.

  • C. Boiling point rises from RCl to RI.

  • D. Branched isomers boil lower than straight-chain isomers.

  • i. The symmetrical molecule packs better in the crystal.

  • ii. Smaller surface area gives weaker van der Waals forces.

  • iii. New attractions with water release less energy than is needed to break water's hydrogen bonds.

  • iv. A larger, more polarisable halogen gives stronger van der Waals forces.

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-ii, D-iv (c) A-iii, B-i, C-iv, D-ii (d) A-ii, B-i, C-iv, D-iii

34. Match List I (compound) with List II (approximate boiling point).

  • A. 1-Bromobutane

  • B. 2-Bromobutane

  • C. 2-Bromo-2-methylpropane

  • D. 1-Iodobutane

  • i. 364 K

  • ii. 346 K

  • iii. 403 K

  • iv. 375 K

(a) A-iv, B-i, C-ii, D-iii (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-i, C-iii, D-ii (d) A-iv, B-ii, C-i, D-iii

35. How many of the following statements are correct?

  • A. Alkyl bromides and iodides are denser than water.

  • B. CCl₄ is denser than CHCl₃.

  • C. Methyl chloride, methyl bromide and ethyl chloride are gases at room temperature.

  • D. Haloalkanes dissolve readily in water.

(a) Three (b) Two (c) Four (d) One

36. Choose the correct set of statements about the dichlorobenzenes.

  • A. The para isomer has zero dipole moment.

  • B. The ortho isomer has the lowest boiling point of the three.

  • C. The three isomers boil within about 7 K of each other.

  • D. The meta isomer has the lowest melting point.

(a) A and B only (b) B and D only (c) A, C and D only (d) A, B, C and D

37. How many of the following statements are correct?

  • A. Boiling point order: CH₃I > CH₃Br > CH₃Cl > CH₃F.

  • B. For the same halogen, the boiling point rises with chain length.

  • C. The density of chloromethanes falls as more Cl atoms are added.

  • D. Haloalkanes are good solvents for ionic salts such as NaCl.

(a) One (b) Two (c) Three (d) Four

38. Choose the correct set of statements.

  • A. Pure haloalkanes are colourless, but bromides and iodides develop colour in light.

  • B. Haloalkanes boil higher than hydrocarbons of comparable molar mass.

  • C. Chloroform is less dense than water.

  • D. Haloalkanes dissolve well in organic solvents.

(a) A and C only (b) B and C only (c) A, B and C only (d) A, B and D only

39. A line graph plots boiling point (y-axis) against the number of carbon atoms (x-axis, 1 to 5) for two series: 1-chloroalkanes and 1-bromoalkanes. Which description fits the graph? (a) The two lines cross at three carbons (b) Both lines rise with chain length, and the bromide line lies above the chloride line throughout (c) Both lines fall with chain length (d) Both lines rise, and the chloride line lies above the bromide line

40. A student shakes three liquids with water (density 1.00 g mL⁻¹) in separate test tubes.

TubeLiquidDensity (g mL⁻¹)
Pn-C₃H₇Cl0.89
Qn-C₃H₇Br1.34
Rn-C₃H₇I1.75

In which tubes does the organic liquid form the lower layer? (a) P only (b) P and Q (c) R only (d) Q and R

41. The dipole moments of the three dichlorobenzenes are listed as X = 0 D, Y = about 1.7 D, Z = about 2.5 D. Which identification is correct? (a) X = para, Y = meta, Z = ortho (b) X = ortho, Y = meta, Z = para (c) X = para, Y = ortho, Z = meta (d) X = meta, Y = para, Z = ortho

Passage for Q42–43. A lab assistant finds two colourless liquids, X and Y. One is chloroform and the other is 1-chloropropane. She shakes each with water. Liquid X forms a layer below the water, and liquid Y forms a layer above it. Neither mixes with water.

42. Liquid X is (a) 1-chloropropane (b) a mixture of both (c) chloroform (d) impossible to tell from this test

43. Why do both liquids form a separate layer with water? (a) The attractions they can form with water release less energy than is needed to break water's hydrogen bonds (b) Both are non-polar molecules (c) Both are ionic compounds (d) Both are denser than water

44. The correct order of increasing boiling point is (a) C₂H₅Cl < CH₃CH₂CH₂Cl < (CH₃)₂CHCl < CH₃(CH₂)₃Cl (b) C₂H₅Cl < (CH₃)₂CHCl < CH₃CH₂CH₂Cl < CH₃(CH₂)₃Cl (c) (CH₃)₂CHCl < C₂H₅Cl < CH₃CH₂CH₂Cl < CH₃(CH₂)₃Cl (d) CH₃(CH₂)₃Cl < CH₃CH₂CH₂Cl < (CH₃)₂CHCl < C₂H₅Cl

45. Which of these has the highest boiling point, even though its dipole moment is zero? (a) CH₃I (b) CH₂Cl₂ (c) CHCl₃ (d) CCl₄

Level 4 answer key

QAnsReason
31db.p. rises F → I: −78, −24, 4, 42 °C.
32bChloride 0.89, iodide 1.75, CHCl₃ 1.49, CCl₄ 1.59 g mL⁻¹.
33cSolubility = energy balance; m.p. = packing; RI = polarisability; branching = surface area.
34a1-Iodobutane is heaviest (403 K); branching lowers b.p. of the bromides from 375 to 364 to 346 K.
35aA, B, C true; haloalkanes are only slightly soluble in water.
36cThe ortho isomer boils highest (453 K), so B is false.
37bA and B true; density rises with more Cl; haloalkanes do not dissolve ionic salts.
38dCHCl₃ (1.49 g mL⁻¹) is denser than water.
39bLonger chain and heavier halogen both raise b.p.; no crossing.
40dOnly liquids denser than 1.00 g mL⁻¹ sink: Br (1.34) and I (1.75).
41aPara vectors cancel; the 60° angle in ortho gives the largest resultant.
42cChloroform (1.49 g mL⁻¹) sinks; 1-chloropropane (0.89) floats.
43aBoth are polar, but too weakly attracted to water to replace its hydrogen bonds.
44bEthyl chloride is smallest; branched isopropyl chloride boils below n-propyl chloride; n-butyl chloride is largest.
45dCCl₄ (77 °C) has the largest mass and surface; dispersion forces outweigh dipole effects.
21 min left
‹
›
Chapter 3: Physical | NEET Chemistry Book 16: Organic…