Chapter 10 of 10 · 12 min read

Last-Week Revision Kit

Use this kit in the final week: read the glance sheet, test yourself on the rapid-fire facts, tick the checklist, then sit Mock Test 2 under time.

Book-at-a-glance sheet

Chapters 1 and 3: structure, classes and basicity

IdeaKey fact
Classes1° R–NH₂, 2° R₂NH, 3° R₃N, quaternary R₄N⁺X⁻
Shapesp³ N, one lone pair, pyramidal; C–N–C about 108° in (CH₃)₃N
Isomer countsC₃H₉N = 4; C₄H₁₁N = 8; aromatic C₇H₉N = 5
Boiling point (isomers)1° > 2° > 3°; amines boil below alcohols of similar mass
Gas-phase basicity3° > 2° > 1° > NH₃
Water, ethyl series2° > 3° > 1° > NH₃ (pKb 3.00, 3.25, 3.29, 4.75)
Water, methyl series2° > 1° > 3° > NH₃ (pKb 3.27, 3.38, 4.22, 4.75)
Aryl aminesC₆H₅NH₂ pKb 9.38; weaker than NH₃; (C₆H₅)₂NH weaker still
Weak base pHpOH = ½(pKb − log c); pKa + pKb = 14

Chapter 2: preparation

MethodReagentCarbon change
Nitro reductionH₂/Pd, Sn/HCl, Fe/HClnone
AmmonolysisNH₃ (ethanolic), heatnone; gives mixture
Nitrile reductionLiAlH₄, H₂/Ni, Na(Hg)/C₂H₅OH+1 C from R–X
Amide reductionLiAlH₄none
GabrielPhthalimide/KOH, R–X, NaOH(aq)none; 1° aliphatic only
Hoffmann bromamideBr₂ + 4NaOH−1 C

Chapters 4 and 5: reactions and tests

Reaction or test1°2°3°
AcylationYesYesNo
HinsbergSoluble in KOHInsolubleNo reaction
CarbylamineFoul smellNoNo
HNO₂ (aliphatic)N₂ + alcoholYellow N-nitrosamineSalt only
HNO₂ at 273–278 K (aryl)Diazonium saltN-Nitrosaminep-Nitroso (ring)

Aniline ring reactions: Br₂ water → 2,4,6-tribromoaniline; direct nitration → p 51%, m 47%, o 2%; H₂SO₄ at 453–473 K → sulphanilic acid; no Friedel–Crafts.

Chapter 6: diazonium salts

ReagentProduct
CuCl/HCl, CuBr/HBr, CuCN/KCNArCl, ArBr, ArCN (Sandmeyer)
Cu + HCl/HBrArCl, ArBr (Gattermann)
KIArI
HBF₄, heatArF (Balz–Schiemann)
H₃PO₂ or C₂H₅OHArH
Warm H₂OArOH
Phenol (mild base) / aniline (mild acid)Orange p-hydroxyazobenzene / yellow p-aminoazobenzene

40 rapid-fire facts

  1. Amines are derivatives of ammonia in which H atoms are replaced by alkyl or aryl groups.

  2. A quaternary ammonium salt has four groups on a positively charged N and is not an amine.

  3. (CH₃)₃C–NH₂ is a primary amine.

  4. Benzylamine is not an aryl amine because its N is on CH₂, not on the ring.

  5. The IUPAC name of aniline is benzenamine.

  6. C₄H₁₁N has 8 structural isomeric amines: 4 primary, 3 secondary, 1 tertiary.

  7. Nitrogen in amines is sp³ hybridised with one lone pair.

  8. The C–N bond in aniline is shorter than in methanamine because of resonance.

  9. Fe scrap + HCl is preferred in industry for reducing nitrobenzene.

  10. Ammonolysis of alkyl halides gives a mixture of amines and a quaternary salt.

  11. Reduction of a nitrile gives a primary amine with the same number of carbons as the nitrile.

  12. Gabriel synthesis gives pure primary aliphatic amines only.

  13. Aryl halides cannot be used in Gabriel synthesis.

  14. Hoffmann bromamide degradation gives an amine with one carbon fewer than the amide.

  15. An isocyanate is the intermediate in Hoffmann bromamide degradation.

  16. Primary amines boil higher than isomeric secondary and tertiary amines.

  17. Amines boil lower than alcohols of comparable molar mass.

  18. Lower aliphatic amines are water-soluble; solubility falls as the alkyl chain grows.

  19. A smaller pKb means a stronger base.

  20. In water, diethylamine (pKb 3.00) is the strongest of the common ethyl amines.

  21. In water, trimethylamine is a weaker base than methanamine.

  22. Aniline (pKb 9.38) is a weaker base than ammonia (pKb 4.75).

  23. An electron-donating group at para makes aniline more basic; an electron-withdrawing group makes it less basic.

  24. Ortho-substituted anilines are weaker bases than aniline (ortho effect).

  25. Tertiary amines cannot be acylated because they have no N–H.

  26. Pyridine is added during acylation to remove HCl.

  27. Only primary amines give the carbylamine test.

  28. Isocyanides have a foul smell.

  29. Primary aliphatic amines with nitrous acid release N₂ gas.

  30. Secondary amines with nitrous acid give yellow oily N-nitrosamines.

  31. Hinsberg's reagent is benzenesulphonyl chloride.

  32. The Hinsberg product of a primary amine is soluble in alkali; that of a secondary amine is not.

  33. Bromine water and aniline give a white precipitate of 2,4,6-tribromoaniline.

  34. Direct nitration of aniline gives about 47% meta product because of the anilinium ion.

  35. Sulphanilic acid exists as a zwitterion.

  36. Aniline does not undergo Friedel–Crafts reactions.

  37. Diazotisation is carried out at 273–278 K.

  38. Benzenediazonium fluoroborate is water-insoluble and stable at room temperature.

  39. Fluorobenzene is made by the Balz–Schiemann reaction.

  40. In azo coupling the diazonium ion is the electrophile and the –N=N– link is kept.

Common mistakes checklist

  • I don't confuse amine class with alcohol class: (CH₃)₃C–NH₂ is 1°.

  • I don't call benzylamine an aryl amine.

  • I can write both water basicity orders (ethyl and methyl series) without mixing them.

  • I don't confuse gas-phase order (3° strongest) with the water order.

  • I remember that a larger pKb means a weaker base.

  • I can count carbons in Hoffmann (−1), nitrile route (+1 from R–X) and Gabriel (no change).

  • I don't write Gabriel synthesis as a route to aniline.

  • I don't confuse Sandmeyer (Cu(I) salts) with Gattermann (Cu powder + HX).

  • I can explain why direct nitration of aniline gives a large meta fraction.

  • I don't mix up coupling conditions: phenol in mild base, aniline in mild acid.

Mock Test 2: New-pattern paper

30 questions · Time: 35 minutes · Marking: +4 for a correct answer, −1 for a wrong answer, 0 if left blank. Use C = 12, H = 1, N = 14, O = 16, Cl = 35.5, Br = 80; molar volume at STP = 22.4 L.

1. Which is the strongest base in water? (a) NH₃ (b) (CH₃)₂NH (c) (CH₃)₃N (d) C₆H₅CH₂NH₂

2. Match List I (conversion) with List II (reagent).

  • A. Aniline → acetanilide

  • B. Benzamide → aniline

  • C. Nitrobenzene → aniline

  • D. Benzonitrile → benzylamine

  • i. Sn/HCl, then NaOH

  • ii. LiAlH₄, then H₂O

  • iii. (CH₃CO)₂O, pyridine

  • iv. Br₂ + NaOH

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

3. The percentage of nitrogen by mass in ethane-1,2-diamine, H₂NCH₂CH₂NH₂, is (a) 46.7% (b) 31.1% (c) 23.3% (d) 53.8%

4. Assertion (A): Acetanilide is less reactive than aniline towards electrophilic substitution. Reason (R): The acetyl group donates electrons to the nitrogen lone pair. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

5. How many of the following statements about Gabriel phthalimide synthesis are correct?

  • A. Phthalimide is the starting material.

  • B. It gives secondary amines.

  • C. The last step is hydrolysis of the N-alkylphthalimide.

  • D. Ethanolic KOH converts phthalimide into its potassium salt.

(a) One (b) Two (c) Three (d) Four

6. A table shows that the boiling points of three C₃H₉N isomers fall in the order propan-1-amine > N-methylethanamine > trimethylamine. The best explanation is (a) The number of N–H bonds available for hydrogen bonding (b) Differences in molar mass (c) Branching alone (d) The order of basicity

7. Which amine cannot be prepared by Gabriel phthalimide synthesis? (a) Ethanamine (b) Benzylamine (c) Propan-1-amine (d) Aniline

8. Statement I: Hoffmann bromamide degradation of propanamide gives propan-1-amine. Statement II: Aryl halides react easily with potassium phthalimide. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

9. Benzenediazonium chloride warmed with copper powder and HBr gives (a) Bromobenzene (b) Benzene (c) Phenol (d) Benzonitrile

10. Match List I (substance) with List II (property).

  • A. Aniline kept in air

  • B. Lower aliphatic amines

  • C. Sulphanilic acid

  • D. Benzenediazonium chloride

  • i. Exists as a zwitterion

  • ii. Darkens by oxidation

  • iii. Colourless, water-soluble crystalline solid

  • iv. Fishy smell

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i

11. Choose the correct set of statements.

  • A. The Gattermann reaction uses copper powder with a halogen acid.

  • B. CuCN converts benzenediazonium chloride into benzonitrile.

  • C. The diazonium ion couples with aniline at the meta position.

  • D. Alkanediazonium salts are stable at 273 K.

(a) A, B and C only (b) C and D only (c) A only (d) A and B only

12. The pH of a 0.010 M aqueous solution of aniline (pKb = 9.38) at 298 K is about (a) 8.81 (b) 8.31 (c) 5.69 (d) 9.38

Case for Q13–14: Priya treats an unknown amine X, C₂H₇N, with NaNO₂ and dilute HCl in the cold. No gas is given off. A yellow oily liquid separates.

13. X is (a) Ethanamine (b) N-Methylmethanamine (c) Ethanamide (d) Ethanenitrile

14. With Hinsberg's reagent, X gives (a) A product soluble in KOH (b) No reaction (c) A foul smell (d) A sulphonamide insoluble in KOH

15. A graph plots pKb (y-axis) against the number of ethyl groups on N (x-axis: 0 for NH₃, then 1, 2, 3), using values 4.75, 3.29, 3.00 and 3.25. Which statement fits the graph? (a) The curve is lowest at two ethyl groups, so diethylamine is the strongest base (b) Basicity rises steadily with ethyl groups (c) Triethylamine is the strongest base (d) NH₃ is the strongest base

16. How many of the following give a coloured azo dye with alkaline β-naphthol after treatment with NaNO₂/HCl at 273–278 K? Aniline, p-toluidine, benzylamine, N-methylaniline, p-chloroaniline, ethanamine (a) Two (b) Four (c) Three (d) Five

17. The best way to make p-nitroaniline from aniline is (a) Acetylate, nitrate, then hydrolyse (b) Nitrate directly with conc. HNO₃ and conc. H₂SO₄ (c) Diazotise, then NaNO₂/Cu (d) Bromine water, then HNO₃

18. Assertion (A): Aniline undergoes Friedel–Crafts alkylation readily. Reason (R): AlCl₃ is a Lewis acid. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

19. In the balanced equation for Hoffmann bromamide degradation, the number of moles of NaOH used per mole of amide is (a) 2 (b) 3 (c) 4 (d) 1

20. Match List I (conversion) with List II (route).

  • A. CH₃CH₂CONH₂ → CH₃CH₂NH₂

  • B. CH₃CH₂Br → CH₃CH₂CH₂NH₂

  • C. CH₃CH₂NO₂ → CH₃CH₂NH₂

  • D. C₆H₅N₂⁺Cl⁻ → C₆H₅CN

  • i. KCN, then LiAlH₄

  • ii. CuCN/KCN

  • iii. Br₂ + NaOH

  • iv. H₂/Pd

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-i, C-ii, D-iv

21. Statement I: Benzylamine forms a stable diazonium salt at 273 K. Statement II: Benzylamine is a stronger base than aniline. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

22. Which of the following is a secondary amine? (a) C₆H₅NHC₂H₅ (b) C₆H₅CH₂NH₂ (c) (CH₃)₃CNH₂ (d) C₆H₅N(CH₃)₂

23. The mass of benzenediazonium chloride (M = 140.5 g/mol) formed from 9.3 g of aniline at 100% yield is (a) 9.30 g (b) 12.25 g (c) 14.05 g (d) 28.1 g

24. Choose the correct set of statements about protecting aniline by acetylation.

  • A. Acetylation lowers the activating effect of the nitrogen.

  • B. Acetanilide is brominated mainly at the para position.

  • C. The acetyl group is removed later by hydrolysis.

  • D. Acetylation turns the group into a meta director.

(a) A and D only (b) A, B and C only (c) B and D only (d) A, B, C and D

25. The correct decreasing order of basicity of P = p-nitroaniline, Q = p-toluidine, R = aniline, S = p-methoxyaniline is (a) S > Q > R > P (b) Q > S > R > P (c) S > R > Q > P (d) P > R > Q > S

26. Match List I (named test or reaction) with List II (reagent).

  • A. Hinsberg test

  • B. Carbylamine test

  • C. Diazotisation

  • D. Hoffmann bromamide degradation

  • i. NaNO₂ + HCl at 273–278 K

  • ii. C₆H₅SO₂Cl

  • iii. Br₂ + NaOH

  • iv. CHCl₃ + alcoholic KOH

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-iv, C-i, D-iii

Case for Q27–28: A student reduces 12.3 g of nitrobenzene with Sn and HCl, adds NaOH, and isolates aniline. She then shakes the aniline with excess bromine water.

27. If every step gives 100% yield, the mass of 2,4,6-tribromoaniline (M = 330 g/mol) formed is (a) 9.3 g (b) 24.9 g (c) 33.0 g (d) 49.5 g

28. Why is NaOH added after the Sn/HCl step? (a) To oxidise the tin (b) To free aniline from its anilinium salt (c) To form a nitrosamine (d) To brominate the ring

29. Benzamide on Br₂/NaOH gives B. B with NaNO₂/HCl at 273 K and then CuCN gives C. C on reduction with LiAlH₄ gives D. D is (a) Aniline (b) Benzonitrile (c) N-Methylaniline (d) Benzylamine

30. The correct decreasing order of basicity in water is (a) (CH₃)₂NH > CH₃NH₂ > (CH₃)₃N > C₆H₅NHCH₃ (b) (CH₃)₃N > (CH₃)₂NH > CH₃NH₂ > C₆H₅NHCH₃ (c) CH₃NH₂ > (CH₃)₂NH > (CH₃)₃N > C₆H₅NHCH₃ (d) C₆H₅NHCH₃ > (CH₃)₂NH > CH₃NH₂ > (CH₃)₃N

Mock Test 2 answer key

QAnsReason
1bpKb 3.27 is the lowest of the four
2dAcetylation, Hoffmann, metal/acid reduction, LiAlH₄ on C≡N
3a28/60 × 100 = 46.7%
4cThe acetyl C=O pulls the lone pair away from the ring, so R is false
5cA, C, D true; Gabriel gives 1° amines
6aTwo, one and zero N–H bonds for H-bonding
7dAryl halides do not react with the phthalimide anion
8bPropanamide gives ethanamine (one C fewer); aryl halides are unreactive
9aGattermann reaction gives ArBr
10cAniline darkens, small amines smell fishy, sulphanilic acid is a zwitterion
11dCoupling is at para; alkanediazonium salts decompose at once
12bpOH = ½(9.38 + 2) = 5.69, pH = 8.31
13bYellow oil, no gas = 2° amine (CH₃)₂NH
14dA 2° sulphonamide has no acidic N–H
15aMinimum pKb (3.00) at diethylamine
16cOnly 1° aryl amines: aniline, p-toluidine, p-chloroaniline
17aProtection avoids oxidation and the meta product
18dAniline forms a salt with AlCl₃, so no Friedel–Crafts; R is true
19cRCONH₂ + Br₂ + 4NaOH → RNH₂ + Na₂CO₃ + 2NaBr + 2H₂O
20bHoffmann; cyanide then reduction; nitro reduction; Sandmeyer
21dBenzylamine is a 1° aliphatic-type amine; it releases N₂ instead
22aN carries a phenyl and an ethyl group and one H
23c0.1 mol × 140.5 = 14.05 g
24b–NHCOCH₃ stays ortho/para-directing
25aOMe (+R) > CH₃ (+I) > H > NO₂ (−R, −I)
26dStandard reagents for each test
27c0.1 mol nitrobenzene → 0.1 mol product = 33.0 g
28bMetal/acid gives C₆H₅NH₃⁺; base releases the free amine
29dB = aniline, C = benzonitrile, D = C₆H₅CH₂NH₂
30apKb 3.27 < 3.38 < 4.22 < 9.30
12 min left
‹
›