Chapter 3 of 10 · 21 min read

Chapter 1: Amines: Classification, Nomenclature and Structure

What you will learn

  • What an amine is and how it is related to ammonia.

  • How to classify amines as primary, secondary, tertiary or quaternary, and as aliphatic or aromatic.

  • How to write common and IUPAC names, and how to count isomers.

  • Why nitrogen in aliphatic amines is pyramidal, with a C–N–C angle near 108°.

  • How the lone pair of aniline spreads into the benzene ring, and what that changes.

1.1 Amines are ammonia with hydrogens replaced

Ammonia is NH₃. Replace one, two or all three hydrogens with alkyl or aryl groups and you get an amine. Think of NH₃ as a three-seat auto-rickshaw. Each seat can hold an H or a carbon group.

  • One seat taken by a carbon group: CH₃NH₂ (methanamine).

  • Two seats taken: (CH₃)₂NH (N-methylmethanamine).

  • All three taken: (CH₃)₃N (N,N-dimethylmethanamine).

Amines occur widely in nature. Proteins, vitamins, alkaloids and hormones all carry nitrogen in amine-like form. Adrenaline and ephedrine contain an amino group. The decaying smell of fish comes mostly from small amines.

1.2 Classification of amines

The class depends on the number of hydrogens of NH₃ that are replaced, not on the carbon that holds the nitrogen.

ClassGeneral formulaFunctional groupH on NExample
Primary (1°)RNH₂–NH₂2CH₃CH₂NH₂
Secondary (2°)R₂NH>NH (imino)1(C₂H₅)₂NH
Tertiary (3°)R₃N>N–0(CH₃)₃N
Quaternary ammonium saltR₄N⁺X⁻R₄N⁺0(CH₃)₄N⁺I⁻

A quaternary ammonium salt is not an amine. Nitrogen has four bonds and carries a positive charge. It has no lone pair, so it cannot act as a base.

Simple and mixed amines. If all groups on N are the same, the amine is simple, for example (C₂H₅)₃N. If they differ, it is mixed, for example CH₃NHC₂H₅.

Aliphatic and aromatic amines. In an aromatic amine (arylamine), nitrogen is joined directly to a benzene ring carbon. C₆H₅NH₂ (aniline) and C₆H₅NHCH₃ are arylamines. In C₆H₅CH₂NH₂ (benzylamine), a CH₂ sits between ring and nitrogen. Its nitrogen behaves like an aliphatic amine nitrogen, so it is called an aryl-alkyl amine and is grouped with aliphatic amines for basicity.

CompoundN joined toTypeClass
C₆H₅NH₂ring carbonaromatic1°
C₆H₅CH₂NH₂CH₂ carbonaliphatic (aryl-alkyl)1°
C₆H₅NHCH₃ring carbonaromatic2°
C₆H₅N(CH₃)₂ring carbonaromatic3°
(CH₃)₃C–NH₂tertiary carbonaliphatic1°

The last row is a favourite trap. (CH₃)₃C–NH₂ has an –NH₂ group, so it is a primary amine. The carbon holding N happens to be tertiary, but that does not matter.

1.3 Naming amines

Common names. Name the alkyl groups in alphabetical order and add "amine" as one word: CH₃NH₂ is methylamine, CH₃NHC₂H₅ is ethylmethylamine. For identical groups use di- or tri-: (CH₃)₃N is trimethylamine.

IUPAC names. Follow these steps.

  1. Pick the longest carbon chain attached to N. Its alkane name drops the final "e" and adds "amine": ethane becomes ethanamine.

  2. Number the chain so the carbon bearing N gets the lowest number. Write the number before "amine": propan-2-amine.

  3. Groups on N (other than the parent chain) are prefixed with N-, for example N-methyl. Two such groups give N,N-.

  4. For two –NH₂ groups, keep the "e" of the alkane and add "diamine": ethane-1,2-diamine.

  5. For arylamines, C₆H₅NH₂ is called aniline (accepted by IUPAC) or benzenamine. Substituted anilines are named as derivatives of aniline.

StructureCommon nameIUPAC name
CH₃NH₂methylaminemethanamine
CH₃CH₂CH₂NH₂n-propylaminepropan-1-amine
CH₃CH(NH₂)CH₃isopropylaminepropan-2-amine
CH₃NHCH₂CH₃ethylmethylamineN-methylethanamine
(CH₃)₃NtrimethylamineN,N-dimethylmethanamine
(C₂H₅)₂NC₃H₇ (n-propyl)N,N-diethylpropylamineN,N-diethylpropan-1-amine
(CH₃)₃CNH₂tert-butylamine2-methylpropan-2-amine
CH₂=CHCH₂NH₂allylamineprop-2-en-1-amine
H₂N(CH₂)₆NH₂hexamethylenediaminehexane-1,6-diamine
C₆H₅NH₂anilineaniline or benzenamine
C₆H₅CH₂NH₂benzylaminephenylmethanamine
C₆H₅NHCH₃N-methylanilineN-methylaniline
C₆H₅N(CH₃)₂N,N-dimethylanilineN,N-dimethylaniline
p-CH₃C₆H₄NH₂p-toluidine4-methylaniline
p-BrC₆H₄NH₂p-bromoaniline4-bromoaniline

In a mixed secondary or tertiary amine, the largest chain becomes the parent. So CH₃NHCH₂CH₂CH₃ is N-methylpropan-1-amine, not N-propylmethanamine.

1.4 Isomerism in amines

Saturated open-chain monoamines have the general formula CₙH₂ₙ₊₃N. They show four kinds of structural isomerism.

TypeWhat changesExample pair
Chaincarbon skeletonCH₃(CH₂)₃NH₂ and (CH₃)₂CHCH₂NH₂
Positionposition of N on the chainpropan-1-amine and propan-2-amine
Functionalclass (1°, 2°, 3°)propan-1-amine and trimethylamine
Metamerismdifferent alkyl groups on N in the same classCH₃NHC₃H₇ and C₂H₅NHC₂H₅

Counting isomers. Count 1°, 2° and 3° amines separately.

Formula1°2°3°Total
C₂H₇N1102
C₃H₉N2114
C₄H₁₁N4318
C₅H₁₃N86317

The 1° count equals the number of isomeric alkyl groups with that many carbons: 1 methyl, 1 ethyl, 2 propyl, 4 butyl, 8 pentyl.

1.5 Structure of aliphatic amines: a pyramid

Nitrogen has five valence electrons. In an amine it uses three to form σ bonds and keeps two as a lone pair. All four electron pairs sit in sp³ hybrid orbitals.

  • Three sp³ orbitals overlap with C or H orbitals to form three σ bonds.

  • The fourth sp³ orbital holds the lone pair.

  • The shape is pyramidal, like NH₃. The lone pair sits at the apex.

Lone pair–bond pair repulsion is stronger than bond pair–bond pair repulsion. So the angle closes below 109.5°. In trimethylamine the C–N–C angle is about 108°. In NH₃ it is 107°; the bulkier methyl groups open it slightly.

A nitrogen with three different groups looks chiral, like a tripod with a handle. But the pyramid turns inside out very fast at room temperature, the way an umbrella flips in monsoon wind. This inversion swaps the two mirror forms, so simple amines like CH₃CH₂N(CH₃)CH₂CH₂CH₃ cannot be separated into enantiomers.

1.6 Structure of aniline: the lone pair spreads into the ring

In aniline the nitrogen sits next to the π system of benzene. Its lone pair overlaps with the ring π orbitals. Nitrogen becomes flatter, with more sp² character, though not fully planar.

Aniline is a resonance hybrid of five contributing structures:

  1. Two Kekulé structures with a neutral –NH₂ group.

  2. Three structures where N carries a positive charge (C=N⁺H₂) and a negative charge sits at one ortho carbon, the other ortho carbon, or the para carbon.

Figure 1.1 · Pyramidal nitrogen versus delocalised aniline
Figure 1.1 · Pyramidal nitrogen versus delocalised aniline

In trimethylamine the lone pair stays on nitrogen at the top of the pyramid; in aniline it flows into the ring, leaving partial negative charge at the ortho and para carbons and a shorter C–N bond.

Three results follow from this delocalisation, and NEET tests all three.

EffectReasonWhere it matters
Aniline is a much weaker base than aliphatic amineslone pair is partly busy with the ringChapter 3
Ortho and para carbons are electron-richnegative charge appears thereChapter 4, bromination and nitration
C–N bond is shorter (about 140 pm) than in methanamine (about 147 pm)partial C=N double-bond characterstructure questions

Worked example 1.1: Classify each amine as 1°, 2° or 3°: (i) (CH₃)₃C–NH₂ (ii) (CH₃)₂CH–NH–CH₃ (iii) C₆H₅N(C₂H₅)₂ (iv) C₆H₅CH₂NH₂.

Solution: Count H atoms left on nitrogen. (i) –NH₂, two H, so 1°. (ii) one H on N, so 2°. (iii) no H on N, so 3°. (iv) –NH₂, so 1°. The type of carbon is irrelevant.

Worked example 1.2: Give IUPAC names: (i) CH₃CH₂CH(NH₂)CH₃ (ii) (CH₃)₂NCH₂CH₃ (iii) H₂NCH₂CH₂NH₂ (iv) m-ClC₆H₄NH₂.

Solution: (i) Longest chain is four carbons; N on C-2, so butan-2-amine. (ii) Parent is ethane; two methyls on N, so N,N-dimethylethanamine. (iii) Two –NH₂ on ethane, so ethane-1,2-diamine. (iv) Chlorine at position 3 of aniline, so 3-chloroaniline.

Worked example 1.3: Write the structure of N-ethyl-N-methylpropan-1-amine and classify it.

Solution: Parent: propan-1-amine, CH₃CH₂CH₂–N. Add one ethyl and one methyl on N. Structure: CH₃CH₂CH₂N(CH₃)CH₂CH₃. No H on N, so it is a 3° mixed amine.

Worked example 1.4: Draw all amines with formula C₄H₁₁N and classify them.

Solution: 1° (four butyl groups): CH₃CH₂CH₂CH₂NH₂ (butan-1-amine), CH₃CH₂CH(NH₂)CH₃ (butan-2-amine), (CH₃)₂CHCH₂NH₂ (2-methylpropan-1-amine), (CH₃)₃CNH₂ (2-methylpropan-2-amine). 2°: CH₃NHCH₂CH₂CH₃, CH₃NHCH(CH₃)₂, CH₃CH₂NHCH₂CH₃. 3°: (CH₃)₂NCH₂CH₃. Total = 4 + 3 + 1 = 8.

Worked example 1.5: How many amines containing a benzene ring have the formula C₇H₉N? Which of them are aromatic amines?

Solution: C₆H₅CH₂NH₂ (benzylamine), o-, m- and p-CH₃C₆H₄NH₂ (three toluidines), and C₆H₅NHCH₃ (N-methylaniline). That is 5. All except benzylamine have N on the ring, so 4 are aromatic amines.

Worked example 1.6: A saturated open-chain primary amine contains 23.73% nitrogen by mass. Find its formula and write its isomers.

Solution: One N per molecule, so molar mass M = 14 ÷ 0.2373 = 59 g/mol. General formula CₙH₂ₙ₊₃N has M = 14n + 17. So 14n + 17 = 59 gives n = 3: C₃H₉N. The 1° isomers are propan-1-amine and propan-2-amine.

M=140.2373=5914n+17=59⇒n=3M = \frac{14}{0.2373} = 59 \qquad 14n + 17 = 59 \Rightarrow n = 3

Worked example 1.7: The C–N bond in aniline is shorter than the C–N bond in methanamine. Explain using hybridisation and resonance.

Solution: Two effects add up. First, the ring carbon is sp², which has more s-character than the sp³ carbon of methanamine, so it holds bonds closer. Second, the N lone pair is delocalised into the ring, giving the C–N bond partial double-bond character. Both shorten the bond.

Worked example 1.8: How many structural isomers of C₅H₁₃N are secondary amines? List them by the pair of groups on N.

Solution: Split five carbons into two groups. Methyl + butyl: four butyl groups, so 4 amines. Ethyl + propyl: two propyl groups, so 2 amines. Total = 6 secondary amines. (Tertiary: dimethyl + propyl gives 2, methyl + diethyl gives 1, so 3. Primary: 8 pentyl groups. Grand total 17.)

Quick revision

  • Amines are derivatives of NH₃: RNH₂ (1°), R₂NH (2°), R₃N (3°); R₄N⁺X⁻ is a quaternary salt, not an amine.

  • Class depends on H atoms on N, not on the carbon bearing N.

  • Arylamines have N on a ring carbon; benzylamine is an aryl-alkyl amine.

  • IUPAC: alkanamine, number the N-bearing carbon, N- prefixes for groups on nitrogen, largest group is the parent.

  • Isomer counts: C₃H₉N = 4, C₄H₁₁N = 8, C₅H₁₃N = 17; aromatic-ring C₇H₉N = 5.

  • N in amines is sp³, pyramidal; C–N–C in trimethylamine is about 108°.

  • Aniline: lone pair delocalised, five resonance structures, negative charge at ortho and para, shorter C–N bond.

NEET traps

  • Calling (CH₃)₃CNH₂ a tertiary amine. It is primary.

  • Treating benzylamine as an aromatic amine for basicity. Its lone pair is not delocalised into the ring.

  • Naming CH₃NHC₃H₇ as N-propylmethanamine. The largest chain is the parent: N-methylpropan-1-amine.

  • Writing "hexan-1,6-diamine". With two amino groups the "e" of hexane stays: hexane-1,6-diamine.

  • Putting a negative charge at meta positions of aniline. Resonance places it only at ortho and para.

  • Counting a quaternary salt as an amine or as a base.

Practice MCQs: Chapter 1

Level 1: Concept check

1. The functional group of a primary amine is (a) >NH (b) –NH₂ (c) >N– (d) –CONH₂

2. (CH₃)₃C–NH₂ is classified as a (a) tertiary amine (b) secondary amine (c) quaternary ammonium salt (d) primary amine

3. The IUPAC name of CH₃NHCH₂CH₃ is (a) N-ethylmethanamine (b) propan-2-amine (c) N-methylethanamine (d) N,N-dimethylmethanamine

4. The hybridisation of nitrogen in trimethylamine is (a) sp (b) sp² (c) dsp² (d) sp³

5. The C–N–C bond angle in trimethylamine is closest to (a) 120° (b) 108° (c) 90° (d) 180°

6. Which of these is an aromatic amine (nitrogen bonded directly to the ring)? (a) C₆H₅CH₂NH₂ (b) C₆H₅CH₂CH₂NH₂ (c) cyclohexanamine (d) C₆H₅NHCH₃

7. Besides "aniline", the IUPAC name accepted for C₆H₅NH₂ is (a) benzenamine (b) phenylmethanamine (c) aminomethylbenzene (d) cyclohexanamine

8. The general formula of a quaternary ammonium salt is (a) R₃N (b) R₄N⁺X⁻ (c) R₃NH⁺X⁻ (d) R₂NH

9. The number of hydrogen atoms on nitrogen in a secondary amine is (a) 1 (b) 2 (c) 0 (d) 3

10. In the resonance structures of aniline, negative charge appears on (a) the meta carbons only (b) the nitrogen atom only (c) the ortho and para carbons (d) all six ring carbons

Level 2: NEET standard

11. The IUPAC name of H₂N–(CH₂)₆–NH₂ is (a) hexamethylenediamine (b) hexan-1-amine (c) hexane-1,6-diamine (d) hexane-1,6-diamide

12. The number of structurally isomeric amines with formula C₃H₉N is (a) 4 (b) 3 (c) 5 (d) 2

13. Which pair shows metamerism? (a) CH₃NHCH₂CH₂CH₃ and CH₃CH₂NHCH₂CH₃ (b) CH₃CH₂CH₂NH₂ and (CH₃)₂CHNH₂ (c) CH₃CH₂CH₂NH₂ and (CH₃)₃N (d) CH₃(CH₂)₃NH₂ and (CH₃)₂CHCH₂NH₂

14. The number of primary amines with formula C₄H₁₁N is (a) 2 (b) 3 (c) 4 (d) 8

15. The IUPAC name of (CH₃)₂CH–NH–CH₃ is (a) N-methylpropan-2-amine (b) N-methylpropan-1-amine (c) N,N-dimethylethanamine (d) butan-2-amine

16. The C–N bond in aniline is shorter than that in methanamine because (a) nitrogen in aniline is sp³ and more electronegative (b) lone pair delocalisation gives the bond partial double-bond character (c) aniline molecules are hydrogen bonded (d) the ring carbon attached to N is sp³

17. Which of the following is a tertiary amine? (a) C₆H₅N(CH₃)₂ (b) C₆H₅NHCH₃ (c) (CH₃)₃CNH₂ (d) C₆H₅CH₂NH₂

18. Which name is NOT a correct IUPAC name for the structure given? (a) prop-2-en-1-amine for CH₂=CHCH₂NH₂ (b) N-methylethanamine for CH₃NHC₂H₅ (c) 4-methylaniline for p-CH₃C₆H₄NH₂ (d) N-propylmethanamine for CH₃NHCH₂CH₂CH₃

19. In which compound is the nitrogen lone pair delocalised into a benzene ring? (a) CH₃NH₂ (b) (CH₃)₃N (c) C₆H₅CH₂NH₂ (d) C₆H₅NH₂

20. The number of isomeric amines of formula C₇H₉N that contain a benzene ring is (a) 3 (b) 4 (c) 5 (d) 6

21. Which compound is both a secondary amine and an aromatic amine? (a) C₆H₅CH₂NHCH₃ (b) C₆H₅NHC₂H₅ (c) p-CH₃C₆H₄NH₂ (d) C₆H₅N(CH₃)₂

22. The C–N–C angle in trimethylamine is less than 109.5° mainly because (a) nitrogen is sp² hybridised (b) methyl groups attract each other (c) lone pair–bond pair repulsion exceeds bond pair–bond pair repulsion (d) trimethylamine molecules form hydrogen bonds

Level 3: Challenge

23. The total number of structurally isomeric amines with formula C₅H₁₃N is (a) 8 (b) 14 (c) 15 (d) 17

24. How many of the C₅H₁₃N amines are secondary? (a) 4 (b) 6 (c) 3 (d) 8

25. A saturated open-chain monoamine contains 19.18% nitrogen by mass. Its molecular formula is (a) C₃H₉N (b) C₅H₁₃N (c) C₄H₁₁N (d) C₂H₇N

26. In the resonance hybrid of aniline, the number of contributing structures that carry a negative charge on a ring carbon is (a) 3 (b) 2 (c) 5 (d) 1

27. CH₃CH₂CH₂N(CH₃)C₂H₅ has three different groups on nitrogen, yet it cannot be separated into enantiomers at room temperature. The reason is that (a) the nitrogen pyramid inverts rapidly, interconverting the mirror forms (b) nitrogen is sp² hybridised and planar (c) the molecule has a plane of symmetry through all atoms (d) the lone pair counts as a fourth group identical to methyl

28. Both members of which pair are secondary amines? (a) (CH₃)₃CNH₂ and (CH₃)₂NH (b) C₆H₅NHCH₃ and C₆H₅N(CH₃)₂ (c) (CH₃)₂CHNH₂ and CH₃NHCH₃ (d) C₆H₅NHCH₃ and (C₂H₅)₂NH

29. Assertion (A): (CH₃)₃C–NH₂ is a primary amine. Reason (R): Amines are classified as 1°, 2° or 3° according to whether the carbon bonded to nitrogen is primary, secondary or tertiary. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In trimethylamine, nitrogen is sp² hybridised and the molecule is planar. Statement II: The C–N bond in aniline is longer than the C–N bond in methanamine. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1b1° amines carry –NH₂
2dN has two H; class ignores the carbon type
3cethane is the longer chain, methyl sits on N
4dthree σ bonds + one lone pair = sp³
5blone pair squeezes the angle to about 108°
6dN bonded to a ring carbon
7abenzenamine is the systematic name
8bfour groups on N⁺ with a counter-ion
9aR₂NH has one H on N
10ccharge reaches ortho and para only
11cdiamine keeps the "e" of hexane
12a2 primary + 1 secondary + 1 tertiary
13asame class (2°), different groups on N
14cfour butyl groups give four 1° amines
15apropane parent, N on C-2, methyl on N
16bresonance gives partial C=N character
17ano H left on N
18dlargest chain is parent: N-methylpropan-1-amine
19donly aniline has N on the ring
20cbenzylamine, three toluidines, N-methylaniline
21bone H on N and N on the ring
22clp–bp repulsion closes the angle
23d8 + 6 + 3 = 17
24bmethyl+butyl (4) and ethyl+propyl (2)
25cM = 14 ÷ 0.1918 = 73 = C₄H₁₁N
26acharge at two ortho and one para carbon
27afast pyramidal inversion
28deach has exactly one H on N
29cA true; class depends on H on N, not on carbon type
30bN is sp³ pyramidal; aniline C–N is shorter

Chapter 1 revision sheet

One-page summary

  • Amines are alkyl or aryl derivatives of ammonia: replace one, two or three H of NH₃ by R or Ar.

  • Class depends on how many groups sit on N: one group = primary (1°, –NH₂), two = secondary (2°, >NH), three = tertiary (3°, >N–).

  • Four groups on N with a positive charge = quaternary ammonium salt, R₄N⁺ X⁻. It is not an amine.

  • Amine class is not the same as alcohol class: (CH₃)₃C–NH₂ is a primary amine though the carbon is tertiary.

  • Aryl amine: N joined directly to the benzene ring (aniline, toluidines, N-methylaniline). Benzylamine C₆H₅CH₂NH₂ is not an aryl amine.

  • Common names: alkyl groups in alphabetical order + "amine" (ethylmethylamine). IUPAC: alkanamine, drop "e" of alkane (ethanamine, propan-2-amine).

  • Groups on N get the locant N (N-methylethanamine, N,N-dimethylbenzenamine). Aniline = benzenamine.

  • Diamines keep the "e": ethane-1,2-diamine, propane-1,3-diamine.

  • Isomer counts: C₂H₇N = 2, C₃H₉N = 4, C₄H₁₁N = 8 (4 + 3 + 1), C₅H₁₃N = 17 (8 + 6 + 3), aromatic C₇H₉N = 5.

  • Saturated acyclic monoamine formula: CₙH₂ₙ₊₃N.

  • N in amines is sp³ with one lone pair; the molecule is pyramidal. C–N–C angle in trimethylamine is about 108°.

  • In aniline the lone pair is delocalised into the ring. The C–N bond gains partial double-bond character and is shorter than in methanamine.

  • Ring positions ortho and para in aniline become electron-rich; this explains its reactivity and its low basicity.

Must-remember table

ItemValue or rule
General formula (saturated acyclic monoamine)CₙH₂ₙ₊₃N
%N in CH₃NH₂ / C₂H₅NH₂ / C₆H₅NH₂45.2% / 31.1% / 15.1%
Molar mass of aniline93 g/mol
Hybridisation of Nsp³, one lone pair
C–N–C angle in (CH₃)₃Nabout 108°
Degree of unsaturation of aniline4
Isomers C₃H₉N (1°, 2°, 3°)2, 1, 1 = 4
Isomers C₄H₁₁N (1°, 2°, 3°)4, 3, 1 = 8
Aromatic isomers C₇H₉N5 (benzylamine, N-methylaniline, o-, m-, p-toluidine)

Memory aids

  • "Two–One–None": count H on nitrogen. Two H = primary, one H = secondary, none = tertiary.

  • "4 Pots, 3 Saucers, 1 Tray": C₄H₁₁N has 4 Primary, 3 Secondary, 1 Tertiary amine = 8 isomers.

  • "Benzyl bluffs": benzylamine looks aromatic, but its N sits on CH₂, so it acts like an aliphatic amine.

  • "The pyramid has 108 steps": trimethylamine is pyramidal with a C–N–C angle near 108°, a little below the tetrahedral 109.5°.

Concept connections

  • Hybridisation, lone pairs and VSEPR shapes come from Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • IUPAC rules, resonance and inductive effects are built in Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • %N by mass is measured by Dumas and Kjeldahl methods in Chemistry Book 13: Purification and Characterisation of Organic Compounds.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (compound) with List II (class).

  • A. (CH₃)₃C–NH₂

  • B. C₆H₅NHCH₃

  • C. (C₂H₅)₃N

  • D. (CH₃)₄N⁺ I⁻

  • i. Quaternary ammonium salt

  • ii. Primary amine

  • iii. Tertiary amine

  • iv. Secondary amine

(a) A-iii, B-iv, C-ii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-i, B-iv, C-iii, D-ii

32. Match List I (structure) with List II (IUPAC name).

  • A. CH₃CH₂CH₂NH₂

  • B. CH₃NHCH₂CH₃

  • C. (CH₃)₂NCH₂CH₃

  • D. H₂N–CH₂CH₂CH₂–NH₂

  • i. N,N-Dimethylethanamine

  • ii. Propane-1,3-diamine

  • iii. Propan-1-amine

  • iv. N-Methylethanamine

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-iv, C-i, D-iii

33. Match List I (molecular formula of amine) with List II (number of structural isomeric amines).

  • A. C₂H₇N

  • B. C₃H₉N

  • C. C₄H₁₁N

  • D. C₇H₉N (containing a benzene ring)

  • i. 8

  • ii. 2

  • iii. 5

  • iv. 4

(a) A-ii, B-iv, C-i, D-iii (b) A-ii, B-iii, C-i, D-iv (c) A-iv, B-ii, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii

34. Match List I (feature) with List II (value).

  • A. Hybridisation of N in (CH₃)₃N

  • B. C–N–C bond angle in (CH₃)₃N

  • C. Number of lone pairs on N in an amine

  • D. Degree of unsaturation of aniline

  • i. 4

  • ii. sp³

  • iii. 1

  • iv. About 108°

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iii, C-iv, D-i (d) A-ii, B-iv, C-iii, D-i

35. How many of the following statements are correct?

  • A. In a secondary amine, nitrogen carries two alkyl or aryl groups.

  • B. (CH₃)₃C–NH₂ is a tertiary amine.

  • C. Benzylamine is an aryl amine.

  • D. Aniline and N-methylaniline are both aromatic amines.

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of statements.

  • A. Nitrogen in amines is sp³ hybridised and carries one lone pair.

  • B. The C–N bond in aniline is shorter than in methanamine.

  • C. Tertiary amines contain one N–H bond.

  • D. Ethanamine and N-methylmethanamine are isomers.

(a) A and C only (b) B and C only (c) A, B and C only (d) A, B and D only

37. How many of the following names are correct IUPAC names for the structures given?

  • A. CH₃CH(NH₂)CH₃: propan-2-amine

  • B. C₆H₅NH₂: benzenamine

  • C. C₆H₅N(CH₃)₂: N,N-dimethylbenzenamine

  • D. H₂NCH₂CH₂NH₂: ethane-1,2-diamine

(a) Four (b) Three (c) Two (d) One

38. Choose the correct set of statements about aniline.

  • A. The lone pair on nitrogen is delocalised into the benzene ring.

  • B. The ortho and para positions of the ring become electron-rich.

  • C. The C–N bond in aniline is longer than the C–N bond in methanamine.

  • D. In the anilinium ion, C₆H₅NH₃⁺, nitrogen still has a lone pair free for resonance.

(a) A only (b) A, B and C only (c) A and B only (d) B and D only

39. A student tabulates the structural isomers of C₄H₁₁N as: Primary 4, Secondary 3, Tertiary 2, Total 9. Which correction is needed? (a) Primary should be 3 (b) Secondary should be 2 (c) No correction is needed (d) Tertiary should be 1, making the total 8

40. A table gives %N by mass: CH₃NH₂ 45.2%, C₂H₅NH₂ 31.1%, C₃H₉N 23.7%, C₆H₅NH₂ x%. Using C = 12, H = 1, N = 14, the value of x is (a) 12.4 (b) 15.1 (c) 17.3 (d) 19.2

41. A graph is drawn of %N by mass (y-axis) against the number of carbon atoms n (x-axis) for saturated primary amines CₙH₂ₙ₊₃N, from n = 1 to n = 10. Which description fits the graph? (a) A straight line sloping downward (b) A curve rising steadily (c) A curve that falls steeply at first and then flattens, getting closer to zero without reaching it (d) A horizontal line

Case for Q42–43: Two old reagent bottles in a school lab are both labelled only "C₃H₉N". Tests show that the amine in bottle P has no N–H bond at all. The amine in bottle Q has nitrogen bonded to just one carbon, and that carbon is bonded to two other carbons.

42. The amine in bottle P is (a) N,N-dimethylmethanamine (b) propan-1-amine (c) N-methylethanamine (d) propan-2-amine

43. Which statement about the amine in bottle Q is correct? (a) It is a secondary amine (b) Its IUPAC name is propan-1-amine (c) It has no N–H bond (d) It is a primary amine named propan-2-amine

44. How many structurally different primary amines have the formula C₅H₁₃N? (a) 6 (b) 7 (c) 8 (d) 9

45. A saturated acyclic monoamine contains 19.18% nitrogen by mass. How many of its structural isomers are secondary amines? (a) 3 (b) 4 (c) 2 (d) 1

Level 4 answer key

QAnsReason
31bOne group on N = 1°; C₆H₅NHCH₃ has two = 2°; (C₂H₅)₃N = 3°; R₄N⁺ = quaternary salt
32cLongest chain on N names the parent; other groups on N get the locant N
33a2, 4, 8 and 5 isomers respectively
34dsp³ N, one lone pair, pyramid angle about 108°; aniline has ring + 3 C=C = 4
35bA and D true; (CH₃)₃C–NH₂ is 1°; benzylamine N is on CH₂, not the ring
36dC is false: a 3° amine has no N–H
37aAll four names follow IUPAC rules
38cResonance shortens the C–N bond; in anilinium the lone pair is used to bond H⁺
39dOnly N,N-dimethylethanamine is 3°, so 4 + 3 + 1 = 8
40b14/93 × 100 = 15.1%
41c%N = 1400/(14n + 17) falls quickly then levels off
42aOnly the 3° isomer (CH₃)₃N has no N–H
43dN on the middle carbon of propane: CH₃CH(NH₂)CH₃
44cPentan-1-, -2-, -3-amine; 2-methylbutan-1-, 3-methylbutan-1-, 2-methylbutan-2-, 3-methylbutan-2-amine; 2,2-dimethylpropan-1-amine
45aM = 14/0.1918 = 73, so C₄H₁₁N; 2° isomers: N-methylpropan-1-amine, N-methylpropan-2-amine, N-ethylethanamine
21 min left
‹
›