Chapter 4 of 10 · 23 min read

Chapter 2: Preparation of Amines

What you will learn

  • How nitro compounds are reduced to amines, and why iron scrap with HCl is the industrial choice.

  • Ammonolysis of alkyl halides, and why it gives a mixture.

  • Reduction of nitriles (one carbon added) and of amides (same carbon count).

  • Gabriel phthalimide synthesis for pure primary aliphatic amines.

  • Hoffmann bromamide degradation (one carbon removed), step by step.

  • How to pick the right method for a given conversion.

2.1 Reduction of nitro compounds

A nitro group (–NO₂) can be reduced all the way to an amino group (–NH₂). Six electrons, or six [H], are needed per nitro group.

C6H5NO2+6[H]→Sn/HCl or Fe/HClC6H5NH2+2H2O\mathrm{C_6H_5NO_2 + 6[H] \xrightarrow{Sn/HCl\ or\ Fe/HCl} C_6H_5NH_2 + 2H_2O}

Common reducing systems:

  • H₂ gas with finely divided Ni, Pd or Pt (catalytic hydrogenation).

  • Sn and HCl, or Fe and HCl (metal in acid).

In acid, the amine is protonated. The product is first an anilinium salt. Adding NaOH frees the amine, which is then steam distilled.

Why iron scrap and HCl is preferred. The FeCl₂ formed hydrolyses in water and releases HCl again. So only a small amount of acid is needed to start the reaction. Iron scrap is also cheap. This is the industrial route to aniline.

Nitroalkanes are reduced the same way: CH₃CH₂NO₂ gives CH₃CH₂NH₂.

2.2 Ammonolysis of alkyl halides

Ammonia has a lone pair, so it is a nucleophile. It attacks an alkyl halide and displaces the halide ion (SN2). The reaction is done by heating the alkyl halide with ethanolic ammonia in a sealed tube at about 373 K. Cleaving a C–X bond by ammonia is called ammonolysis.

NH3+R−X→R−NH3+X−\mathrm{NH_3 + R{-}X \rightarrow R{-}NH_3^+X^-}

The salt is treated with a strong base to free the amine:

R−NH3+X−+NaOH→R−NH2+H2O+NaX\mathrm{R{-}NH_3^+X^- + NaOH \rightarrow R{-}NH_2 + H_2O + NaX}

The problem: over-alkylation. The primary amine formed is itself a nucleophile, often a better one than NH₃. It reacts with more R–X. The chain goes on to the quaternary salt.

RNH2→RXR2NH→RXR3N→RXR4N+X−\mathrm{RNH_2 \xrightarrow{RX} R_2NH \xrightarrow{RX} R_3N \xrightarrow{RX} R_4N^+X^-}

Think of a crowded Mumbai local: everyone who gets on keeps pulling the next person in. You get a mixture of all four products.

ConditionMain product
Large excess of NH₃1° amine
Large excess of R–Xquaternary ammonium salt

Reactivity of halides: R–I > R–Br > R–Cl. Aryl halides do not undergo ammonolysis under these conditions because the C–X bond has partial double-bond character.

2.3 Reduction of nitriles: one carbon up

A nitrile R–C≡N is reduced by LiAlH₄, by H₂/Ni, or by sodium in ethanol (sodium amalgam). The product is a primary amine RCH₂NH₂.

R−C≡N+4[H]→R−CH2−NH2\mathrm{R{-}C{\equiv}N + 4[H] \rightarrow R{-}CH_2{-}NH_2}

The nitrile is usually made from an alkyl halide with KCN. The CN carbon is new. So the amine has one carbon more than the starting alkyl halide. This is a standard "ascent of series" step.

CH3CH2Br→KCNCH3CH2CN→LiAlH4CH3CH2CH2NH2\mathrm{CH_3CH_2Br \xrightarrow{KCN} CH_3CH_2CN \xrightarrow{LiAlH_4} CH_3CH_2CH_2NH_2}

2.4 Reduction of amides: same carbon count

LiAlH₄ followed by water reduces the C=O of an amide to CH₂. The carbon count does not change.

R−CO−NH2→(ii) H2O(i) LiAlH4R−CH2−NH2\mathrm{R{-}CO{-}NH_2 \xrightarrow[(ii)\ H_2O]{(i)\ LiAlH_4} R{-}CH_2{-}NH_2}

N-substituted amides give secondary or tertiary amines. CH₃CONHCH₃ gives CH₃CH₂NHCH₃. This is a clean way to make 2° and 3° amines without over-alkylation.

2.5 Gabriel phthalimide synthesis: pure 1° aliphatic amines

Phthalimide is a benzene ring fused to a five-membered ring containing –CO–NH–CO–. The N–H is flanked by two C=O groups, which pull electron density and stabilise the anion. So the N–H is acidic.

  1. Phthalimide + ethanolic KOH gives potassium phthalimide (the N⁻ anion).

  2. The anion attacks an alkyl halide (SN2) and gives N-alkylphthalimide.

  3. Hydrolysis with aqueous NaOH (or treatment with hydrazine) releases the primary amine and the phthalate.

Figure 2.1 · Gabriel phthalimide synthesis
Figure 2.1 · Gabriel phthalimide synthesis

Read top to bottom: once nitrogen carries one alkyl group it has no N–H left, so the chain cannot run on to 2° or 3° amines.

Why only primary amines? After step 2, nitrogen has no H left and its lone pair is tied up by two C=O groups. It cannot react with a second R–X. So there is no over-alkylation.

Limits of the method:

  • Aromatic primary amines (aniline) cannot be made. Aryl halides do not undergo SN2 with the phthalimide anion.

  • Tertiary alkyl halides give elimination instead of substitution.

2.6 Hoffmann bromamide degradation: one carbon down

A primary amide (–CONH₂) is warmed with bromine and aqueous (or ethanolic) NaOH. The product is a primary amine with one carbon fewer. The lost carbon leaves as carbonate.

R−CONH2+Br2+4NaOH→R−NH2+Na2CO3+2NaBr+2H2O\mathrm{R{-}CONH_2 + Br_2 + 4NaOH \rightarrow R{-}NH_2 + Na_2CO_3 + 2NaBr + 2H_2O}

The steps:

  1. Bromination of N: R–CONH₂ + Br₂ + OH⁻ gives R–CONHBr (N-bromoamide) + Br⁻ + H₂O.

  2. Base removes the remaining N–H: R–CONBr⁻ (an anion).

  3. Rearrangement: Br⁻ leaves and R moves from carbon to nitrogen at the same moment. This gives an isocyanate, R–N=C=O.

  4. Hydrolysis: R–N=C=O + H₂O gives a carbamic acid R–NH–COOH, which loses CO₂. In base, CO₂ ends up as CO₃²⁻, and R–NH₂ is left.

Figure 2.2 · Hoffmann bromamide degradation, step by step
Figure 2.2 · Hoffmann bromamide degradation, step by step

Follow the chain down: the isocyanate forms when R moves from carbon to nitrogen, and hydrolysis then strips off the old carbonyl carbon as carbonate.

Key facts for NEET:

  • The migrating group R keeps its configuration. An optically active R stays optically active.

  • It works for aromatic amides too: benzamide gives aniline.

  • Per mole of amide: 1 mol Br₂ and 4 mol NaOH are used.

  • The amide must have –CONH₂ (two H on N). N-substituted amides do not react this way.

2.7 Choosing a method

MethodStarting materialReagentAmine classCarbon changeGives ArNH₂?
Nitro reductionR–NO₂ or Ar–NO₂Fe/HCl, Sn/HCl, H₂/Pd1°noneyes
AmmonolysisR–Xethanolic NH₃, 373 Kmixturenoneno
Nitrile reductionR–CNLiAlH₄ or H₂/Ni or Na/C₂H₅OH1° (RCH₂NH₂)+1 vs R–Xno
Amide reductionR–CONH₂, R–CONHR′LiAlH₄, then H₂O1°, 2° or 3°noneno
GabrielR–XK-phthalimide, then hydrolysispure 1°noneno
Hoffmann bromamideR–CONH₂Br₂ + NaOH1°−1yes (from ArCONH₂)

Worked example 2.1: Write the reaction for reducing nitrobenzene with iron scrap and HCl. Why is only a little HCl needed?

Solution: C₆H₅NO₂ + 6[H] → C₆H₅NH₂ + 2H₂O, with Fe/HCl as the source of [H]. FeCl₂ formed during the reaction hydrolyses and gives back HCl. So the acid is regenerated and only a small initial amount is needed.

Worked example 2.2: 24.6 g of nitrobenzene is reduced to aniline with 80% yield. Find the mass of aniline obtained. (C₆H₅NO₂ = 123 g/mol, C₆H₅NH₂ = 93 g/mol.)

Solution: Moles of nitrobenzene = 24.6 ÷ 123 = 0.200 mol. One mole gives one mole of aniline. Theoretical mass = 0.200 × 93 = 18.6 g. Actual = 0.80 × 18.6 = 14.88 g, about 14.9 g.

Worked example 2.3: Bromoethane is heated with ethanolic ammonia in a sealed tube. Name all the possible organic products. How would you get mainly ethanamine?

Solution: Ethanamine (C₂H₅NH₂), N-ethylethanamine ((C₂H₅)₂NH), N,N-diethylethanamine ((C₂H₅)₃N) and tetraethylammonium bromide ((C₂H₅)₄N⁺Br⁻), first as their salts. Using a large excess of NH₃ makes ethanamine the main product, because each C₂H₅Br molecule is far more likely to meet NH₃ than an amine.

Worked example 2.4: Convert bromoethane into propan-1-amine.

Solution: One carbon must be added, so go through a nitrile. CH₃CH₂Br + KCN → CH₃CH₂CN + KBr. Then CH₃CH₂CN + 4[H] (LiAlH₄) → CH₃CH₂CH₂NH₂.

Worked example 2.5: Which of these can be made by the Gabriel synthesis: (i) benzylamine (ii) aniline (iii) 2-methylpropan-2-amine (iv) propan-1-amine?

Solution: (i) Yes: C₆H₅CH₂Cl undergoes SN2 easily. (ii) No: chlorobenzene does not undergo SN2. (iii) No: (CH₃)₃CBr eliminates rather than substitutes with a bulky nucleophile. (iv) Yes: from 1-bromopropane.

Worked example 2.6: Which amide gives propan-2-amine on Hoffmann bromamide degradation?

Solution: Work backwards. The amine R–NH₂ comes from R–CONH₂, with the same R. Here R = (CH₃)₂CH–. So the amide is (CH₃)₂CH–CONH₂, 2-methylpropanamide.

Worked example 2.7: 5.9 g of ethanamide (CH₃CONH₂) undergoes complete Hoffmann degradation. Find the mass of amine formed and the masses of Br₂ and NaOH used.

Solution: M(CH₃CONH₂) = 59 g/mol, so 0.100 mol. Product is methanamine (31 g/mol): 0.100 × 31 = 3.1 g. Br₂ used = 0.100 mol × 160 = 16 g. NaOH used = 0.400 mol × 40 = 16 g.

Worked example 2.8: Starting from ethanoic acid, prepare (i) methanamine and (ii) ethanamine.

Solution: First make the amide: CH₃COOH + SOCl₂ → CH₃COCl; CH₃COCl + NH₃ → CH₃CONH₂. (i) Hoffmann: CH₃CONH₂ + Br₂ + 4NaOH → CH₃NH₂ (one carbon lost). (ii) Reduction: CH₃CONH₂ + LiAlH₄, then H₂O → CH₃CH₂NH₂ (no carbon lost).

Worked example 2.9: An unbranched amide A (C₃H₇NO) gives B (C₂H₇N) with Br₂/NaOH and C (C₃H₉N) with LiAlH₄. B and C both give foul-smelling products with CHCl₃ and alcoholic KOH. Identify A, B and C.

Solution: The foul-smelling (carbylamine) test shows B and C are primary amines. A loses one carbon on Hoffmann degradation, so A is a primary amide with three carbons: CH₃CH₂CONH₂ (propanamide). B = CH₃CH₂NH₂ (ethanamine). C = CH₃CH₂CH₂NH₂ (propan-1-amine).

Quick revision

  • Nitro to amine needs 6[H]; Fe/HCl is used industrially because FeCl₂ hydrolysis regenerates HCl.

  • Ammonolysis (ethanolic NH₃, sealed tube, 373 K) gives a 1°/2°/3°/quaternary mixture; excess NH₃ favours 1°.

  • R–X → R–CN → RCH₂NH₂ adds one carbon.

  • RCONH₂ + LiAlH₄ → RCH₂NH₂ keeps the carbon count; N-substituted amides give 2°/3° amines.

  • Gabriel: pure 1° aliphatic amines; fails for aniline and for tertiary halides.

  • Hoffmann: RCONH₂ + Br₂ + 4NaOH → RNH₂ + Na₂CO₃ + 2NaBr + 2H₂O; isocyanate intermediate; one carbon fewer; configuration retained.

NEET traps

  • Saying Hoffmann degradation keeps the carbon count. It removes the C=O carbon.

  • Using Gabriel synthesis to make aniline. Aryl halides do not do SN2.

  • Confusing the Hoffmann intermediate (isocyanate, R–N=C=O) with an isocyanide (R–N≡C, from the carbylamine reaction).

  • Forgetting that NaOH must be added after Sn/HCl reduction to free the amine from its salt.

  • Writing 2 mol NaOH in the Hoffmann equation. The balanced equation uses 4 mol.

  • Assuming ammonolysis gives a single amine. It gives a mixture unless NH₃ is in large excess.

Practice MCQs: Chapter 2

Level 1: Concept check

1. Which reagent is used industrially to reduce nitrobenzene to aniline? (a) Zn dust and NaOH (b) iron scrap and HCl (c) Br₂ and NaOH (d) acidified KMnO₄

2. Hoffmann bromamide degradation converts an amide into an amine that has (a) one carbon more (b) the same number of carbons (c) two carbons fewer (d) one carbon fewer

3. Gabriel phthalimide synthesis is used to prepare (a) secondary amines (b) tertiary amines (c) aromatic primary amines (d) aliphatic primary amines

4. CH₃CN on reduction with LiAlH₄ gives (a) CH₃CH₂NH₂ (b) CH₃NH₂ (c) CH₃CONH₂ (d) (CH₃)₂NH

5. Ammonolysis of alkyl halides is an example of (a) nucleophilic substitution (b) electrophilic substitution (c) free radical substitution (d) elimination

6. The key intermediate in Hoffmann bromamide degradation is an (a) alkyl nitrile (b) alkyl isocyanate (c) alkyl isocyanide (d) alkyl diazonium ion

7. Ethanamide on reduction with LiAlH₄ followed by water gives (a) methanamine (b) ethanamine (c) ethanenitrile (d) ethanol

8. Phthalimide is converted into potassium phthalimide by treatment with (a) aqueous KCl (b) KMnO₄ (c) ethanolic KOH (d) K₂Cr₂O₇

9. When ammonia is heated with a large excess of methyl iodide, the final product is (a) methanamine (b) tetramethylammonium iodide (c) ethanenitrile (d) methanol

10. Which amine CANNOT be prepared by the Gabriel phthalimide synthesis? (a) aniline (b) ethanamine (c) benzylamine (d) propan-1-amine

Level 2: NEET standard

11. Fe/HCl is preferred over Sn/HCl for reducing nitrobenzene on a large scale because (a) iron is more expensive and purer (b) iron gives secondary amines selectively (c) FeCl₂ formed hydrolyses and releases HCl, so little acid is needed (d) iron also reduces the benzene ring

12. In the balanced equation for Hoffmann bromamide degradation, the number of moles of NaOH used per mole of amide is (a) 4 (b) 2 (c) 1 (d) 3

13. The order of reactivity of alkyl halides towards ammonolysis is (a) RCl > RBr > RI (b) RBr > RI > RCl (c) RF > RCl > RBr (d) RI > RBr > RCl

14. Which amide gives propan-2-amine on Hoffmann bromamide degradation? (a) butanamide (b) 2-methylpropanamide (c) propanamide (d) 2-methylbutanamide

15. Which sequence converts an alkyl halide R–X into an amine with one more carbon atom? (a) R–X + excess NH₃ (b) R–X + potassium phthalimide, then hydrolysis (c) R–X → R–OH → R–NH₂ (d) R–X + KCN, then LiAlH₄

16. Propanamide is warmed with Br₂ and aqueous NaOH. The organic product is (a) propan-1-amine (b) propanenitrile (c) ethanamine (d) methanamine

17. N-methylethanamide (CH₃CONHCH₃) on reduction with LiAlH₄ gives (a) CH₃CH₂NH₂ (b) CH₃CH₂NHCH₃ (c) (CH₃)₂NH (d) CH₃NH₂ and ethanol

18. Aromatic primary amines cannot be prepared by the Gabriel synthesis because (a) aryl halides do not undergo nucleophilic substitution with the phthalimide anion (b) phthalimide is not acidic (c) aniline is too strong a base (d) KOH reacts with the benzene ring

19. When nitrobenzene is reduced with Sn and HCl, the product present before alkali is added is (a) free aniline (b) nitrosobenzene (c) azobenzene (d) a salt of the anilinium ion

20. Which method gives a primary amine free from secondary and tertiary amines? (a) heating CH₃CH₂Br with ethanolic NH₃ (b) Gabriel phthalimide synthesis (c) heating CH₃NH₂ with CH₃I (d) heating NH₃ with excess CH₃I

21. The mass of aniline obtained by complete reduction of 12.3 g nitrobenzene is (a) 12.3 g (b) 4.65 g (c) 9.3 g (d) 18.6 g

22. Which reagent does NOT reduce a nitrile to a primary amine? (a) H₂/Ni (b) LiAlH₄, then H₂O (c) Na in C₂H₅OH (d) Br₂ and NaOH

Level 3: Challenge

23. The mass of bromine needed to convert 24.2 g of benzamide (C₆H₅CONH₂) completely into aniline by Hoffmann degradation is (a) 16 g (b) 64 g (c) 32 g (d) 48 g

24. An amide C₅H₁₁NO gives 2-methylpropan-2-amine on Hoffmann degradation. The amide is (a) (CH₃)₃CCONH₂ (b) (CH₃)₂CHCH₂CONH₂ (c) CH₃CH₂CH(CH₃)CONH₂ (d) CH₃(CH₂)₃CONH₂

25. The best way to convert ethanol into propan-1-amine is (a) PCl₅, then excess NH₃ (b) PBr₃, then KCN, then LiAlH₄ (c) oxidation to acid, then amide, then Br₂/NaOH (d) oxidation to acid, then amide, then LiAlH₄

26. An optically active amide, (S)-2-methylbutanamide, undergoes Hoffmann bromamide degradation. The product is (a) butan-2-amine with configuration retained (b) racemic butan-2-amine (c) butan-2-amine with configuration inverted (d) 2-methylbutan-1-amine

27. 0.73 g of an unbranched primary amide gives 0.45 g of a primary amine (100% yield) by Hoffmann degradation. The amide is (a) ethanamide (b) butanamide (c) propanamide (d) methanamide

28. To get the highest yield of a primary amine by ammonolysis, one should (a) use an excess of alkyl halide (b) use an aryl halide (c) use an alkyl fluoride (d) use a large excess of ammonia

29. Assertion (A): Gabriel phthalimide synthesis is a good method for preparing aniline. Reason (R): The N–H hydrogen of phthalimide is acidic because nitrogen is flanked by two C=O groups. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Reducing a nitrile made from an alkyl halide gives a primary amine with one carbon more than the alkyl halide. Statement II: Hoffmann bromamide degradation gives an amine with one carbon fewer than the amide. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bcheap; FeCl₂ hydrolysis regenerates HCl
2dcarbonyl carbon leaves as carbonate
3dSN2 on alkyl halide, no over-alkylation
4aRCN + 4[H] gives RCH₂NH₂
5aNH₃ lone pair displaces X⁻
6bR–N=C=O forms after migration
7bC=O becomes CH₂, carbon count same
8cKOH removes the acidic N–H
9balkylation runs on to the quaternary salt
10aaryl halides do not undergo SN2
11cacid is regenerated by hydrolysis
12aRCONH₂ + Br₂ + 4NaOH
13dweaker C–X bond reacts faster
14bR = (CH₃)₂CH stays on N
15dCN carbon is the extra carbon
16cC₂H₅CONH₂ loses one carbon
17bC=O to CH₂ keeps the N-methyl
18aC–X of aryl halide has partial double bond
19damine is protonated in acid
20bN-alkylphthalimide cannot alkylate again
21c0.1 mol × 93 = 9.3 g
22dBr₂/NaOH is the Hoffmann reagent for amides
23c0.2 mol amide needs 0.2 mol Br₂ = 32 g
24aR = (CH₃)₃C, so amide is (CH₃)₃CCONH₂
25bbromide, nitrile, then reduce: +1 carbon
26amigrating group keeps its configuration
27cmasses differ by CO (28): 73 and 45
28dNH₃ outcompetes the amine for R–X
29dA false (aryl halides fail); R true
30anitrile adds a carbon; Hoffmann removes one

Chapter 2 revision sheet

One-page summary

  • Nitro compounds → amines: H₂ with finely divided Ni, Pd or Pt, or metal + acid (Sn/HCl, Fe/HCl). Six H atoms are needed per –NO₂.

  • Fe scrap + HCl is preferred in industry: FeCl₂ formed is hydrolysed and releases HCl, so little acid is needed.

  • Metal + acid gives the ammonium salt (C₆H₅NH₃⁺Cl⁻); NaOH is added to free the amine.

  • Ammonolysis: R–X + NH₃ (ethanolic, sealed tube, ~373 K) → RNH₃⁺X⁻; the free amine keeps reacting to give 2°, 3° amines and R₄N⁺X⁻. Excess NH₃ favours the 1° amine.

  • Halide reactivity in ammonolysis: R–I > R–Br > R–Cl. Aryl halides do not react under these conditions.

  • Nitriles: R–C≡N + 4[H] (LiAlH₄, or H₂/Ni, or Na(Hg)/C₂H₅OH) → R–CH₂NH₂. Since R–CN is made from R–X + KCN, this ascends the chain by one carbon.

  • Amides: LiAlH₄ then H₂O reduces R–CONH₂ → R–CH₂NH₂ (same carbon count). N-substituted amides give 2° or 3° amines.

  • Gabriel phthalimide synthesis: phthalimide + ethanolic KOH → potassium salt; + R–X → N-alkylphthalimide; alkaline hydrolysis → R–NH₂ + phthalate.

  • Gabriel gives pure 1° aliphatic amines only. Aryl halides fail because they resist nucleophilic substitution by the phthalimide anion.

  • Hoffmann bromamide degradation: R–CONH₂ + Br₂ + 4NaOH → R–NH₂ + Na₂CO₃ + 2NaBr + 2H₂O.

  • In Hoffmann, R migrates from carbonyl carbon to N via an isocyanate (R–N=C=O); the amine has one carbon fewer than the amide.

  • Benzamide + Br₂/NaOH gives aniline, so Hoffmann can make aryl amines (Gabriel cannot).

Must-remember table

MethodReagentCarbon changeAmine class
Reduction of R–NO₂ / Ar–NO₂H₂/Pd or Sn/HCl or Fe/HClnone1° (aliphatic or aryl)
Ammonolysis of R–XNH₃ (ethanolic), heatnonemixture; excess NH₃ → mainly 1°
Reduction of R–CNLiAlH₄ or H₂/Ni or Na(Hg)/C₂H₅OH+1 C relative to R–X1°
Reduction of R–CONH₂LiAlH₄, then H₂Onone1° (2°/3° from substituted amides)
Gabriel synthesisPhthalimide, KOH, R–X, then NaOH(aq)nonepure 1° aliphatic only
Hoffmann bromamideBr₂ + NaOH−1 C1° (aliphatic or aryl)

Memory aids

  • "Hoffmann Halves a Head": Hoffmann bromamide chops off the carbonyl carbon (it leaves as carbonate), so the chain loses one carbon.

  • "Cyanide Climbs": R–X → R–CN → R–CH₂NH₂ climbs the chain by one carbon.

  • "Gabriel Guards the Gate": only primary amines pass, and only aliphatic ones; aryl halides are left outside.

  • "Iron Is Thrifty": Fe/HCl needs little acid because FeCl₂ hydrolyses and gives HCl back.

Concept connections

  • Nucleophilic substitution of R–X (ammonolysis, Gabriel, R–X + KCN) comes from Chemistry Book 16: Organic Compounds Containing Halogens.

  • Amides and nitriles as carboxylic acid derivatives are in Chemistry Book 17: Organic Compounds Containing Oxygen.

  • Mole calculations for yields use Chemistry Book 1: Some Basic Concepts in Chemistry; electron counting in reductions uses Chemistry Book 7: Redox Reactions and Electrochemistry.

Practice MCQs: Chapter 2, Level 4 (new NEET pattern)

31. Match List I (method) with List II (reagent).

  • A. Hoffmann bromamide degradation

  • B. Gabriel phthalimide synthesis

  • C. Industrial reduction of nitrobenzene

  • D. Reduction of a nitrile

  • i. Fe scrap + HCl

  • ii. Br₂ + NaOH

  • iii. LiAlH₄ or Na(Hg)/C₂H₅OH

  • iv. Phthalimide + ethanolic KOH, then R–X

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-iv, C-i, D-ii

32. Match List I (reaction) with List II (main amine formed).

  • A. CH₃CH₂CONH₂ + Br₂/NaOH

  • B. CH₃CH₂CN + LiAlH₄, then H₂O

  • C. CH₃CONHCH₃ + LiAlH₄, then H₂O

  • D. C₆H₅NO₂ + Sn/HCl, then NaOH

  • i. N-Methylethanamine

  • ii. Ethanamine

  • iii. Aniline

  • iv. Propan-1-amine

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i

33. Match List I (method) with List II (what it does to the product).

  • A. Hoffmann bromamide degradation

  • B. R–X → R–CN → reduction

  • C. Gabriel synthesis from R–X

  • D. Ammonolysis of R–X

  • i. Amine has one carbon more than the alkyl halide

  • ii. A mixture of amines of different classes can form

  • iii. Amine has one carbon fewer than the amide

  • iv. Pure primary amine with the same carbons as the alkyl halide

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iii, B-i, C-iv, D-ii

34. Match List I (method) with List II (special feature).

  • A. Hoffmann bromamide degradation

  • B. Gabriel synthesis

  • C. Fe/HCl reduction

  • D. Ammonolysis

  • i. Phthalate is the by-product

  • ii. Amine is first obtained as RNH₃⁺X⁻ and needs a strong base

  • iii. FeCl₂ is hydrolysed, regenerating HCl

  • iv. An isocyanate R–N=C=O is formed on the way

(a) A-i, B-iv, C-iii, D-ii (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-i, C-ii, D-iii

35. How many of the following statements are correct?

  • A. Gabriel synthesis can be used to prepare aniline.

  • B. Hoffmann bromamide degradation of benzamide gives aniline.

  • C. Reduction of nitriles gives primary amines.

  • D. In ammonolysis, a large excess of ammonia favours the primary amine.

(a) One (b) Two (c) Three (d) Four

36. Choose the correct set of statements.

  • A. In Hoffmann bromamide degradation, the alkyl group moves from the carbonyl carbon to nitrogen.

  • B. Aryl halides react readily with potassium phthalimide.

  • C. LiAlH₄ reduces an amide to an amine with the same number of carbon atoms.

  • D. Sn/HCl reduction of nitrobenzene gives free aniline without any alkali.

(a) A and C only (b) A, B and C only (c) B and D only (d) C and D only

37. Choose the correct set of statements about reducing nitro compounds.

  • A. Fe/HCl needs only a little acid because FeCl₂ formed is hydrolysed to release HCl.

  • B. H₂ gas with finely divided Ni, Pd or Pt also reduces –NO₂ to –NH₂.

  • C. The nitrogen atom is lost during the reduction.

  • D. Six hydrogen atoms are used per –NO₂ group: one –NH₂ and two H₂O form.

(a) A and B only (b) B and C only (c) A, C and D only (d) A, B and D only

38. How many of the following give a primary amine as the main product?

  • A. CH₃CH₂CONH₂ + Br₂/NaOH

  • B. CH₃CN + H₂/Ni

  • C. CH₃CONHCH₃ + LiAlH₄, then H₂O

  • D. N-Ethylphthalimide + NaOH(aq), heat

  • E. C₆H₅NO₂ + Sn/HCl, then NaOH

(a) Three (b) Four (c) Five (d) Two

39. A table lists Hoffmann bromamide results at 100% yield: ethanamide 5.9 g → methanamine 3.1 g; propanamide 7.3 g → ethanamine y g; benzamide 12.1 g → aniline z g. The values of y and z are (a) 4.5 and 9.3 (b) 5.9 and 9.3 (c) 4.5 and 10.7 (d) 3.1 and 9.3

40. A flowchart shows two routes from bromoethane. Route 1: CH₃CH₂Br → (KCN) → X → (LiAlH₄) → Y. Route 2: CH₃CH₂Br → (potassium phthalimide) → (NaOH(aq), heat) → Z. Y and Z are (a) Y = ethanamine, Z = propan-1-amine (b) Both ethanamine (c) Both propan-1-amine (d) Y = propan-1-amine, Z = ethanamine

41. In a trial, 24.6 g of nitrobenzene gives 14.88 g of aniline. The percentage yield is (a) 60% (b) 80% (c) 75% (d) 70%

Case for Q42–43: A student needs pure propan-1-amine, CH₃CH₂CH₂NH₂. She lists three routes. Route 1: 1-bromopropane heated with ethanolic ammonia in a sealed tube. Route 2: butanamide with Br₂ and NaOH. Route 3: 1-bromopropane with potassium phthalimide, then alkaline hydrolysis.

42. Which route is likely to give a mixture of 1°, 2° and 3° amines? (a) Route 1 (b) Route 2 (c) Route 3 (d) None of them

43. If she uses Route 2 with 17.4 g of butanamide (C₄H₉NO, M = 87 g/mol) at 100% yield, the mass of propan-1-amine (M = 59 g/mol) formed is (a) 8.7 g (b) 14.6 g (c) 11.8 g (d) 9.0 g

44. An amide X on Hoffmann bromamide degradation gives amine Y, C₃H₉N. Y gives the carbylamine test, and its nitrogen is on a carbon bonded to two other carbons. X is (a) 2-methylpropanamide (b) butanamide (c) propanamide (d) N-methylpropanamide

45. Which sequence converts benzene into aniline? (a) Cl₂/FeCl₃, then NH₃ at room temperature (b) CH₃Cl/AlCl₃, then Br₂/NaOH (c) Chlorobenzene with potassium phthalimide, then hydrolysis (d) Conc. HNO₃/conc. H₂SO₄, then Sn/HCl, then NaOH

Level 4 answer key

QAnsReason
31aBr₂/NaOH = Hoffmann; phthalimide = Gabriel; Fe/HCl = industry; LiAlH₄ reduces C≡N
32cHoffmann loses one C; nitrile keeps C of CN; N-methyl amide gives 2° amine
33dHoffmann −1 C; cyanide route +1 C; Gabriel gives pure 1°; ammonolysis over-alkylates
34bIsocyanate in Hoffmann; phthalate in Gabriel; FeCl₂ hydrolysis; ammonium salt in ammonolysis
35cB, C, D true; Gabriel cannot make aryl amines
36aAryl halides resist substitution; metal/acid gives the anilinium salt first
37dN stays in the product: C₆H₅NO₂ + 6[H] → C₆H₅NH₂ + 2H₂O
38bA, B, D, E give 1°; C gives the 2° amine CH₃CH₂NHCH₃
39a0.1 mol each: 0.1 × 45 = 4.5 g, 0.1 × 93 = 9.3 g
40dCyanide adds a carbon (C₃ amine); Gabriel keeps two carbons
41b0.2 mol → 18.6 g theoretical; 14.88/18.6 = 80%
42aThe amine formed keeps attacking R–X, so 2° and 3° amines also form
43c17.4/87 = 0.2 mol; 0.2 × 59 = 11.8 g
44aY = propan-2-amine, so X = (CH₃)₂CHCONH₂
45dNitration, reduction, then base frees aniline; aryl halides do not undergo easy substitution
23 min left
‹
›
Chapter 2: Preparation | NEET Chemistry Book 18: Organic…