Chapter 4: Chemical Reactions of Amines
What you will learn
How amines act as nucleophiles in alkylation and acylation.
The carbylamine reaction and why only primary amines give it.
How 1°, 2° and 3° amines, aliphatic and aromatic, react with nitrous acid.
How amines react with benzenesulphonyl chloride (Hinsberg's reagent).
Electrophilic substitution in aniline: bromination, nitration, sulphonation, and why Friedel–Crafts fails.
How acetylation protects –NH₂ and tames its activating power.
4.1 Two roles of the lone pair
Nearly every reaction of an amine starts with the nitrogen lone pair.
Towards a proton, it acts as a base (Chapter 3).
Towards a carbon or other electron-poor centre, it acts as a nucleophile. Alkylation, acylation, the carbylamine reaction and the Hinsberg reaction are all nucleophilic attacks.
In aniline, the lone pair also feeds the ring. That makes the ring very reactive towards electrophiles (Section 4.7).
The number of H atoms on nitrogen decides how far each reaction can go. That is why these reactions are used to tell 1°, 2° and 3° amines apart.
4.2 Alkylation
Amines react with alkyl halides by SN2, just like NH₃ in ammonolysis. Each step adds one alkyl group to N.
With enough alkyl halide, any amine (1°, 2° or 3°) ends as a quaternary ammonium salt. Treating an amine with excess CH₃I until no more reacts is called exhaustive methylation.
4.3 Acylation
Primary and secondary amines react with acid chlorides, acid anhydrides and esters. The nitrogen attacks the C=O carbon, and an H on nitrogen is replaced by an acyl group (RCO–). The product is an amide.
Points to remember:
A base stronger than the amine, usually pyridine, is added. It removes the HCl formed. Otherwise HCl would protonate the amine and stop the reaction, and the equilibrium is pushed to the right.
Tertiary amines have no H on N, so they are not acylated.
Each acetyl group adds 42 g/mol (CH₃CO replaces H: 43 − 1). Counting this mass gain tells you the number of –NH₂ or >NH groups.
Reaction with benzoyl chloride (C₆H₅COCl) is called benzoylation. Aniline gives benzanilide, C₆H₅NHCOC₆H₅. Done in aqueous NaOH, it is the Schotten–Baumann reaction.
The amide product is a much weaker base and a much weaker ring activator, because the N lone pair is now shared with the C=O group.
4.4 Carbylamine reaction (isocyanide test)
A primary amine, aliphatic or aromatic, is warmed with chloroform and ethanolic KOH. An isocyanide (carbylamine) forms. It has a strong, nasty smell.
The reactive species is dichlorocarbene, :CCl₂, formed when KOH removes HCl from CHCl₃. The amine nitrogen attacks it and then loses two HCl. Two H atoms must leave nitrogen, so only 1° amines respond. Secondary and tertiary amines do not.
The same reaction is a test for chloroform: a sample that gives the foul smell with aniline and KOH contains CHCl₃.
4.5 Reaction with nitrous acid
Nitrous acid (HNO₂) is unstable, so it is made in the flask from NaNO₂ and a mineral acid such as HCl.
Primary aliphatic amines give an unstable aliphatic diazonium salt. It breaks down at once, releasing nitrogen gas and forming an alcohol (along with other products).
The N₂ comes out quantitatively, one mole per mole of –NH₂. Measuring its volume estimates amino acids and proteins (Van Slyke method).
Primary aromatic amines at 273–278 K give a stable arenediazonium salt. This is diazotisation (Chapter 6).
Secondary amines (aliphatic and aromatic) give N-nitrosamines, R₂N–N=O. These are yellow oily liquids, insoluble in water.
Warming a nitrosamine with phenol and conc. H₂SO₄ gives a deep colour that changes on adding alkali (Liebermann's nitroso reaction).
Tertiary aliphatic amines have no N–H. They simply form a soluble trialkylammonium nitrite salt, R₃NH⁺NO₂⁻.
Tertiary aromatic amines undergo ring substitution at the para position. N,N-dimethylaniline gives p-nitroso-N,N-dimethylaniline, a green solid.
| Amine | Product with HNO₂ | Visible sign |
|---|---|---|
| 1° aliphatic | alcohol + N₂ | brisk gas evolution |
| 1° aromatic (0–5 °C) | arenediazonium salt | clear solution; gives dye with β-naphthol |
| 2° (both types) | N-nitrosamine | yellow oil |
| 3° aliphatic | R₃NH⁺NO₂⁻ | no visible change, dissolves |
| 3° aromatic | p-nitroso compound | green solid |
4.6 Reaction with benzenesulphonyl chloride
Benzenesulphonyl chloride, C₆H₅SO₂Cl, is called Hinsberg's reagent. The amine attacks sulphur and replaces Cl.
Primary amine gives an N-alkylbenzenesulphonamide. Nitrogen still has one H, which is strongly acidic because the SO₂ group pulls on it. So the product dissolves in aqueous alkali (KOH) as a salt.
Secondary amine gives an N,N-dialkylbenzenesulphonamide. No H is left on N, so it is not acidic and does not dissolve in alkali.
Tertiary amine has no H on N and does not react.
Today p-toluenesulphonyl chloride is often used instead. The full test is drawn in Chapter 5.
4.7 Electrophilic substitution in aniline
The –NH₂ group is a strong activator and an ortho/para director. Its lone pair raises the electron density at ortho and para carbons (Chapter 1 resonance). This makes aniline far too reactive in some reactions, and gives trouble in others.
(a) Bromination. Aniline reacts with bromine water at room temperature. A white precipitate of 2,4,6-tribromoaniline forms at once. All three activated positions are substituted, and no catalyst is needed.
You cannot stop at monobromination this way. To get p-bromoaniline, the –NH₂ must be protected first (Section 4.8).
(b) Nitration. Direct nitration with conc. HNO₃ and conc. H₂SO₄ has two problems.
Nitric acid oxidises aniline, giving tarry, dark products.
In strong acid, much of the aniline is protonated to the anilinium ion, C₆H₅NH₃⁺. This ion has no lone pair and is a meta director and deactivator.
So a surprising mixture forms: about 51% para, 47% meta and 2% ortho nitroaniline. The large meta share is a favourite NEET point.
(c) Sulphonation. Aniline and conc. H₂SO₄ first form anilinium hydrogensulphate. Heating at 453–473 K gives p-aminobenzenesulphonic acid, called sulphanilic acid.
Sulphanilic acid exists mainly as a zwitterion, ⁻O₃S–C₆H₄–NH₃⁺. Like a salt, it has a high melting point and is insoluble in organic solvents.
(d) No Friedel–Crafts reaction. AlCl₃ is a Lewis acid. Aniline is a Lewis base. They form a salt, C₆H₅NH₂→AlCl₃. The nitrogen now carries a positive charge, which deactivates the ring. Alkylation and acylation of the ring fail.
4.8 Protection of –NH₂ by acetylation
The fix for over-reaction is to turn –NH₂ into –NHCOCH₃ (acetanilide) first. Think of it as fitting a regulator on a pressure cooker: the steam still comes, but slowly and where you want it.
Why acetylation works:
The N lone pair is now shared with the C=O group by resonance. Less of it reaches the ring.
–NHCOCH₃ is still an ortho/para director, but only a moderate activator.
The bulky acetamido group blocks the ortho positions. The para product dominates.
The amide is not protonated in acid, and resists oxidation by HNO₃.
The sequence has three steps:
Protect: C₆H₅NH₂ + (CH₃CO)₂O (pyridine) → C₆H₅NHCOCH₃.
Substitute: Br₂ in CH₃COOH gives mainly p-bromoacetanilide. Conc. HNO₃/H₂SO₄ at 288 K gives mainly p-nitroacetanilide.
Deprotect: hydrolysis with H⁺ or OH⁻ gives p-bromoaniline or p-nitroaniline.

Without protection, bromine water hits all three activated positions; with the amino group acetylated first, a single group goes para and hydrolysis restores –NH₂.
4.9 Uses of amines
Aniline is the starting material for azo dyes, drugs (sulpha drugs from sulphanilic acid) and rubber chemicals.
Hexane-1,6-diamine is a monomer of nylon-6,6.
Quaternary ammonium salts with long chains act as cationic detergents and germicides.
Some amines are used as corrosion inhibitors and in making medicines such as local anaesthetics.
Worked example 4.1: Complete: (i) C₂H₅NH₂ + CH₃COCl (pyridine) (ii) (C₂H₅)₂NH + C₆H₅COCl (iii) (C₂H₅)₃N + CH₃COCl.
Solution: (i) N-ethylethanamide, C₂H₅NHCOCH₃ + HCl (taken up by pyridine). (ii) N,N-diethylbenzamide, C₆H₅CON(C₂H₅)₂ + HCl. (iii) No acylation: a 3° amine has no H on N.
Worked example 4.2: Why is pyridine added during acylation of amines?
Solution: The reaction releases HCl. Without a base, HCl would protonate unreacted amine to RNH₃⁺, which has no free lone pair and cannot attack. Pyridine mops up the HCl and shifts the equilibrium towards the amide.
Worked example 4.3: An amine C₃H₉N gives a foul smell with CHCl₃ and alcoholic KOH. Give its possible structures.
Solution: The carbylamine test shows a 1° amine. C₃H₉N primary amines: CH₃CH₂CH₂NH₂ and (CH₃)₂CHNH₂. Either fits.
Worked example 4.4: 0.59 g of propan-1-amine is treated with excess NaNO₂ and HCl. Find the volume of N₂ at STP.
Solution: M = 59 g/mol, so 0.010 mol amine. Each mole of 1° aliphatic amine releases one mole of N₂. Volume = 0.010 × 22.4 L = 0.224 L = 224 mL. The organic product is mainly propan-1-ol.
Worked example 4.5: 9.3 g of aniline is treated with excess bromine water. Find the mass of precipitate.
Solution: 9.3 ÷ 93 = 0.10 mol aniline. Product is 2,4,6-tribromoaniline, C₆H₄Br₃N: M = 72 + 4 + 240 + 14 = 330 g/mol. Mass = 0.10 × 330 = 33 g.
Worked example 4.6: A diamine of molar mass 108 g/mol is fully acetylated. The product has molar mass 192 g/mol. How many amino groups were acetylated?
Solution: Each acetylation replaces H by CH₃CO: gain = 43 − 1 = 42. Number of groups = (192 − 108) ÷ 42 = 2. (The compound could be a phenylenediamine, C₆H₄(NH₂)₂.)
Worked example 4.7: Direct nitration of aniline gives a large amount of m-nitroaniline. Explain, and suggest how to get p-nitroaniline as the main product.
Solution: In conc. HNO₃/H₂SO₄, aniline is protonated to C₆H₅NH₃⁺. The –NH₃⁺ group is meta directing, so about 47% meta product forms. To get the para product: acetylate to acetanilide, nitrate (mainly para because ortho is blocked), then hydrolyse the amide.
Worked example 4.8: Convert aniline into p-bromoaniline and explain each step.
Solution: Step 1: C₆H₅NH₂ + (CH₃CO)₂O → C₆H₅NHCOCH₃ (lone pair now shared with C=O). Step 2: Br₂ in CH₃COOH → p-BrC₆H₄NHCOCH₃ (moderate activation, ortho crowded). Step 3: hydrolysis with H₃O⁺ or OH⁻ → p-BrC₆H₄NH₂.
Worked example 4.9: Compounds A, B and C are isomers of C₃H₉N. A releases N₂ with HNO₂. B gives a yellow oil with HNO₂. C dissolves in HNO₂ with no visible change and does not react with C₆H₅SO₂Cl. Identify them, given A has an unbranched chain.
Solution: A is 1°: CH₃CH₂CH₂NH₂. B is 2° (nitrosamine): CH₃NHCH₂CH₃. C is 3°: (CH₃)₃N.
Quick revision
Lone pair = nucleophile: alkylation runs on to R₄N⁺X⁻; acylation needs N–H, so 3° amines are not acylated.
Acylation uses pyridine to remove HCl; each acetyl adds 42 g/mol; benzoylation gives benzanilide.
Carbylamine: RNH₂ + CHCl₃ + 3KOH → RNC (foul smell); only 1° amines; via :CCl₂.
HNO₂: 1° aliphatic → ROH + N₂; 1° aromatic (273–278 K) → ArN₂⁺; 2° → yellow N-nitrosamine; 3° aliphatic → salt; 3° aromatic → p-nitroso.
Hinsberg: 1° sulphonamide dissolves in KOH; 2° does not; 3° does not react.
Br₂ water + aniline → 2,4,6-tribromoaniline (white ppt).
Direct nitration: about 51% p, 47% m, 2% o plus oxidation tar; anilinium ion is meta directing.
Sulphonation at 453–473 K → sulphanilic acid (zwitterion); no Friedel–Crafts (AlCl₃ complex).
NEET traps
Expecting 2° amines to give the carbylamine test. Only 1° amines do.
Writing p-bromoaniline as the product of aniline with bromine water. It is 2,4,6-tribromoaniline.
Forgetting the meta product in direct nitration of aniline.
Thinking AlCl₃ catalyses Friedel–Crafts on aniline. It forms a salt and deactivates the ring.
Mixing up the products of 1° aliphatic amines (alcohol + N₂) and 1° aromatic amines (stable diazonium salt at 0–5 °C) with nitrous acid.
Saying 3° amines are acylated. No H on N means no acylation.
Practice MCQs: Chapter 4
Level 1: Concept check
1. Which amine gives the carbylamine test? (a) (CH₃)₂NH (b) (CH₃)₃N (c) C₆H₅NHCH₃ (d) C₆H₅NH₂
2. Aniline with bromine water at room temperature gives (a) 2,4,6-tribromoaniline (b) p-bromoaniline (c) o-bromoaniline (d) m-bromoaniline
3. Which amine CANNOT be acylated by acetyl chloride? (a) CH₃NH₂ (b) (CH₃)₂NH (c) (CH₃)₃N (d) C₆H₅NH₂
4. Hinsberg's reagent is (a) CHCl₃ + KOH (b) NaNO₂ + HCl (c) (CH₃CO)₂O (d) C₆H₅SO₂Cl
5. A secondary amine reacts with nitrous acid to give (a) an alcohol and N₂ (b) a diazonium salt (c) an N-nitrosamine (d) a nitrite salt only
6. The reactive intermediate in the carbylamine reaction is (a) a carbocation (b) dichlorocarbene (c) a nitrene (d) a benzyne
7. Sulphanilic acid is (a) p-aminobenzenesulphonic acid (b) o-aminobenzenesulphonic acid (c) benzenesulphonic acid (d) m-aminobenzenesulphonic acid
8. Acetylation of aniline gives (a) acetanilide (b) benzanilide (c) N-methylaniline (d) phenyl isocyanide
9. A primary aliphatic amine with nitrous acid gives mainly (a) a stable diazonium salt (b) a nitrosamine (c) an alcohol with evolution of N₂ (d) a nitro compound
10. Aniline does not undergo Friedel–Crafts reaction because (a) it is too reactive (b) it is a gas (c) the ring is deactivated by –NH₂ (d) it forms a salt with AlCl₃
Level 2: NEET standard
11. In acylation of amines with acid chlorides, pyridine is used to (a) act as the solvent only (b) remove the HCl formed and shift the equilibrium forward (c) oxidise the amine (d) protonate the amine
12. Direct nitration of aniline gives a large amount of m-nitroaniline because (a) –NH₂ is meta directing (b) nitronium ion attacks nitrogen (c) aniline is protonated to the meta-directing anilinium ion (d) the ortho positions are blocked
13. N,N-dimethylaniline reacts with nitrous acid to give (a) an N-nitrosamine (b) p-nitroso-N,N-dimethylaniline (c) phenol (d) benzenediazonium chloride
14. The product formed by a primary amine with benzenesulphonyl chloride dissolves in KOH because (a) the sulphonamide is a strong base (b) the remaining N–H is acidic due to the SO₂ group (c) it has no hydrogen on N (d) it hydrolyses to the amine
15. p-Bromoaniline is best prepared from aniline by (a) bromine water (b) Br₂ in CS₂ at 273 K (c) acetylation, bromination, then hydrolysis (d) Br₂ with FeBr₃
16. Which reagents convert aniline into sulphanilic acid? (a) dilute H₂SO₄ at 298 K (b) SO₃ and AlCl₃ (c) C₆H₅SO₂Cl (d) conc. H₂SO₄, then heating at 453–473 K
17. Ethanamine heated with excess CH₃I finally gives (a) C₂H₅N⁺(CH₃)₃I⁻ (b) C₂H₅NHCH₃ (c) C₂H₅N(CH₃)₂ (d) CH₃CH₂OH
18. Benzoylation of aniline gives (a) acetanilide (b) benzanilide (c) benzamide (d) benzophenone
19. The –NHCOCH₃ group of acetanilide is (a) a strong activator and meta director (b) a deactivator and meta director (c) a moderate activator and ortho/para director (d) an inert group with no directing effect
20. Sulphanilic acid has a high melting point and is insoluble in organic solvents because (a) it is a polymer (b) it forms a covalent dimer (c) it is a gas at room temperature (d) it exists as a zwitterion
21. Which amine gives a yellow oily compound with NaNO₂ and HCl at low temperature? (a) N-methylaniline (b) aniline (c) trimethylamine (d) ethanamine
22. Methanamine + CHCl₃ + alcoholic KOH, on warming, gives (a) CH₃NC (b) CH₃CN (c) CH₃NCO (d) CH₃OH
Level 3: Challenge
23. The mass of 2,4,6-tribromoaniline formed from 4.65 g of aniline with excess bromine water is (a) 33.0 g (b) 8.25 g (c) 12.5 g (d) 16.5 g
24. The volume of N₂ at STP released when 0.90 g of ethanamine reacts with excess HNO₂ is (a) 224 mL (b) 112 mL (c) 896 mL (d) 448 mL
25. An amine of molar mass 59 g/mol is fully acetylated. The product has molar mass 101 g/mol. The amine could be (a) CH₃CH₂CH₂NH₂ or (CH₃)₂CHNH₂ or CH₃NHC₂H₅ (b) (CH₃)₃N only (c) H₂NCH₂CH₂NH₂ (d) any C₃H₉N isomer including (CH₃)₃N
26. In direct nitration of aniline, the approximate share of p-, m- and o-nitroaniline is (a) 2%, 47%, 51% (b) 98%, 0%, 2% (c) 51%, 47%, 2% (d) 33%, 34%, 33%
27. An amine X (C₇H₉N) gives a foul smell with CHCl₃/KOH. With NaNO₂/HCl at 278 K it gives a solution that couples with β-naphthol to give an orange dye. X cannot be (a) o-toluidine (b) m-toluidine (c) p-toluidine (d) benzylamine
28. Which sequence gives o-nitroaniline in better yield than direct nitration? (a) acetylate, nitrate, hydrolyse (b) acetylate, sulphonate at para, nitrate, then remove the SO₃H and acetyl groups by acid hydrolysis (c) diazotise, then nitrate (d) nitrate in the presence of AlCl₃
29. Assertion (A): Aniline does not undergo Friedel–Crafts alkylation. Reason (R): AlCl₃ is a Lewis base that donates electrons to the ring and makes it too reactive. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Direct nitration of aniline gives a substantial amount of the meta product. Statement II: The anilinium ion formed in strongly acidic medium is a meta-directing group. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | d | only 1° amines give isocyanides |
| 2 | a | all o/p positions brominated |
| 3 | c | no H on N |
| 4 | d | benzenesulphonyl chloride |
| 5 | c | R₂N–N=O, a yellow oil |
| 6 | b | :CCl₂ from CHCl₃ + KOH |
| 7 | a | para –NH₂ and –SO₃H |
| 8 | a | C₆H₅NHCOCH₃ |
| 9 | c | unstable RN₂⁺ gives ROH + N₂ |
| 10 | d | Lewis acid–base salt deactivates ring |
| 11 | b | base removes HCl |
| 12 | c | –NH₃⁺ directs meta |
| 13 | b | 3° aromatic amines nitrosate at para |
| 14 | b | N–H next to SO₂ is acidic |
| 15 | c | protection prevents tribromination |
| 16 | d | anilinium hydrogensulphate is heated |
| 17 | a | exhaustive methylation to quaternary salt |
| 18 | b | C₆H₅NHCOC₆H₅ |
| 19 | c | lone pair shared with C=O |
| 20 | d | ionic ⁻O₃S–C₆H₄–NH₃⁺ form |
| 21 | a | 2° amine gives N-nitrosamine |
| 22 | a | methyl isocyanide |
| 23 | d | 0.05 mol × 330 = 16.5 g |
| 24 | d | 0.02 mol × 22.4 L = 448 mL |
| 25 | a | gain 42 = one N–H acylated; 3° cannot react |
| 26 | c | 51 : 47 : 2 |
| 27 | d | benzylamine gives no stable diazonium salt |
| 28 | b | para blocked by SO₃H, so nitro goes ortho |
| 29 | c | AlCl₃ is a Lewis acid; it forms a salt |
| 30 | a | II explains I |
Chapter 4 revision sheet
One-page summary
Amines react in two ways: the N lone pair acts as a nucleophile (alkylation, acylation, sulphonylation, carbylamine, nitrous acid), and in aryl amines the ring is attacked by electrophiles.
Alkylation with R–X keeps going: 1° → 2° → 3° → quaternary salt R₄N⁺X⁻ with excess alkyl halide.
Acylation: 1° and 2° amines + acid chloride, anhydride or ester → amide. 3° amines have no N–H and are not acylated. Pyridine (a base stronger than the amide) removes the HCl formed.
Benzoylation with C₆H₅COCl is a special case of acylation (aniline → benzanilide).
Carbylamine reaction: 1° amine + CHCl₃ + 3KOH (alc.), warm → R–NC (foul smell) + 3KCl + 3H₂O.
Nitrous acid (NaNO₂ + HCl, made in situ): 1° aliphatic → N₂ gas + alcohol (via unstable diazonium); 1° aromatic at 273–278 K → stable diazonium salt; 2° → yellow oily N-nitrosamine; 3° aliphatic → soluble salt only; 3° aromatic → p-nitroso compound (ring attack).
Benzenesulphonyl chloride: 1° → N-alkylsulphonamide, soluble in alkali; 2° → N,N-dialkylsulphonamide, insoluble; 3° → no reaction (Hinsberg).
–NH₂ is a strong activating, ortho/para-directing group.
Bromine water + aniline → white precipitate of 2,4,6-tribromoaniline at room temperature.
Direct nitration: in strong acid aniline becomes C₆H₅NH₃⁺ (meta-directing). Products: para about 51%, meta about 47%, ortho about 2%, plus tarry oxidation products.
Sulphonation: aniline + conc. H₂SO₄ → anilinium hydrogensulphate; heat at 453–473 K → sulphanilic acid (p-aminobenzenesulphonic acid), which exists as a zwitterion.
No Friedel–Crafts: aniline (a Lewis base) forms a salt with AlCl₃; N gets a positive charge and deactivates the ring.
Protection: acetylate (–NHCOCH₃ is a milder activator, still o/p-directing, bulky so para is favoured), then substitute, then hydrolyse back to –NH₂.
Must-remember table
| Reaction of aniline | Reagent and condition | Main product |
|---|---|---|
| Bromination | Br₂ water, room temperature | 2,4,6-Tribromoaniline (white ppt) |
| Monobromination | Acetylate, Br₂ in CH₃COOH, hydrolyse | p-Bromoaniline |
| Direct nitration | Conc. HNO₃ + conc. H₂SO₄ | p 51%, m 47%, o 2% |
| Nitration after protection | Acetylate, nitrate, hydrolyse | p-Nitroaniline (major) |
| Sulphonation | Conc. H₂SO₄, 453–473 K | Sulphanilic acid |
| Acetylation | (CH₃CO)₂O or CH₃COCl, pyridine | Acetanilide (M = 135) |
| Carbylamine | CHCl₃ + alc. KOH, warm | Phenyl isocyanide C₆H₅NC |
| Diazotisation | NaNO₂ + HCl, 273–278 K | Benzenediazonium chloride |
| Friedel–Crafts | AlCl₃ | No reaction (salt formation) |
Memory aids
"Acid Turns Aniline Meta": in strong acid, –NH₂ becomes –NH₃⁺, a meta director, which explains the 47% meta product.
"Put a Hat on It": the acetyl group is a hat on –NH₂. It calms the ring, blocks ortho by bulk, and comes off by hydrolysis.
"3° has No Hand to Shake": tertiary amines have no N–H, so no acylation, no sulphonamide, no carbylamine.
"51–47–2, Para Meta Ortho": direct nitration percentages in reading order P–M–O.
Concept connections
Activating and directing effects in electrophilic substitution come from Chemistry Book 15: Hydrocarbons.
Acylation with acid chlorides and anhydrides uses the carbonyl chemistry of Chemistry Book 17: Organic Compounds Containing Oxygen.
Lewis acid–base salt formation with AlCl₃ links to Chemistry Book 10: p-Block Elements; the dyes and drugs made from amines lead to Chemistry Book 19: Biomolecules.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. Match List I (aniline + reagent) with List II (main product).
A. Bromine water
B. Acetic anhydride, pyridine
C. Conc. H₂SO₄, heated at 453–473 K
D. CHCl₃ + alcoholic KOH, warm
i. Acetanilide
ii. Phenyl isocyanide
iii. 2,4,6-Tribromoaniline
iv. Sulphanilic acid
(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-i, C-ii, D-iv
32. Match List I (amine treated with NaNO₂ + HCl) with List II (observation or product).
A. CH₃CH₂NH₂
B. C₆H₅NH₂ at 273–278 K
C. (CH₃)₂NH
D. C₆H₅N(CH₃)₂
i. Yellow oily N-nitrosamine
ii. Brisk evolution of N₂
iii. p-Nitroso-N,N-dimethylaniline
iv. Benzenediazonium chloride
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-i, D-iii
33. Match List I with List II for the direct nitration of aniline.
A. p-Nitroaniline
B. m-Nitroaniline
C. o-Nitroaniline
D. C₆H₅NH₃⁺
i. About 2%
ii. About 51%
iii. About 47%
iv. Meta-directing species formed in strong acid
(a) A-iii, B-ii, C-i, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iii, C-i, D-iv (d) A-ii, B-iii, C-iv, D-i
34. Match List I (reagent used on an amine) with List II (name of reaction).
A. C₆H₅COCl, NaOH
B. Excess CH₃I
C. CHCl₃ + alcoholic KOH
D. C₆H₅SO₂Cl
i. Carbylamine reaction
ii. Sulphonamide formation (Hinsberg)
iii. Benzoylation
iv. Exhaustive alkylation to a quaternary salt
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-iv, C-ii, D-i
35. How many of the following statements are correct?
A. Aniline does not undergo Friedel–Crafts reactions because it forms a salt with AlCl₃.
B. –NHCOCH₃ is a weaker activator than –NH₂.
C. Tertiary amines undergo acylation with acetyl chloride.
D. Pyridine is added in acylation to remove the HCl formed.
E. Sulphanilic acid exists as a zwitterion.
(a) Two (b) Three (c) Four (d) Five
36. Choose the correct set of statements.
A. Aniline with bromine water stops at monobromination.
B. Protecting –NH₂ by acetylation makes p-bromoaniline the main product of bromination.
C. Hydrolysis of the acetanilide derivative gives back the –NH₂ group.
D. The –NHCOCH₃ group is meta-directing.
(a) A and B only (b) B and C only (c) C and D only (d) A, B and C only
37. Choose the correct set of statements about nitrous acid and amines.
A. Nitrous acid is made in the reaction mixture from NaNO₂ and dilute HCl.
B. Primary aliphatic amines form unstable diazonium salts that lose N₂.
C. Secondary amines give N-nitrosamines.
D. Tertiary aliphatic amines give N₂ gas.
(a) A and D only (b) B and D only (c) A, B and D only (d) A, B and C only
38. How many of the following give an amide with acetyl chloride? CH₃NH₂, (CH₃)₂NH, (CH₃)₃N, C₆H₅NH₂, C₆H₅NHCH₃, C₆H₅N(CH₃)₂ (a) Four (b) Three (c) Five (d) Six
39. A table lists masses before and after complete acetylation with excess acetic anhydride: 9.3 g aniline → 13.5 g; 3.1 g methanamine → x g; 5.4 g benzene-1,4-diamine (M = 108 g/mol) → y g. x and y are (a) 7.3 and 7.5 (b) 5.9 and 9.6 (c) 7.3 and 8.1 (d) 7.3 and 9.6
40. A bar chart of the direct nitration of aniline shows three bars: X = 51%, Y = 47%, Z = 2%. X, Y and Z are (a) X ortho, Y meta, Z para (b) X para, Y meta, Z ortho (c) X meta, Y para, Z ortho (d) X para, Y ortho, Z meta
41. 2.25 g of ethanamine reacts completely with excess nitrous acid. The volume of N₂ at STP (22.4 L/mol) is (a) 2.24 L (b) 0.56 L (c) 1.12 L (d) 4.48 L
Case for Q42–43: Ravi wants p-bromoaniline from aniline. He first adds bromine water, and a white precipitate forms at once. He then plans a three-step route instead.
42. The white precipitate is (a) 2,4,6-Tribromoaniline (b) p-Bromoaniline (c) o-Bromoaniline (d) Anilinium bromide
43. The correct three-step route is (a) Br₂ in CS₂; HNO₃; Sn/HCl (b) Conc. H₂SO₄; Br₂ water; NaOH (c) CH₃I; Br₂; heat (d) (CH₃CO)₂O with pyridine; Br₂ in CH₃COOH; hydrolysis
44. Compound X, C₇H₉N, does not give the carbylamine test. It gives a yellow oily compound with HNO₂ and reacts with acetyl chloride. X is (a) Benzylamine (b) p-Toluidine (c) N-Methylaniline (d) N,N-Dimethylaniline
45. 9.3 g of aniline is fully converted to 2,4,6-tribromoaniline. The mass of Br₂ used and the mass of product formed are (a) 16 g; 17.2 g (b) 48 g; 33.0 g (c) 24 g; 33.0 g (d) 48 g; 25.1 g
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Br₂ water → tribromo; anhydride → acetanilide; H₂SO₄ + heat → sulphanilic acid; CHCl₃/KOH → isocyanide |
| 32 | d | 1° aliphatic loses N₂; 1° aryl gives diazonium; 2° gives nitrosamine; 3° aryl is nitrosated at para |
| 33 | c | Para 51%, meta 47%, ortho 2%; anilinium ion directs meta |
| 34 | a | Standard reagent–reaction pairs |
| 35 | c | A, B, D, E true; 3° amines have no N–H to acylate |
| 36 | b | Bromine water gives tribromo product; –NHCOCH₃ is o/p-directing |
| 37 | d | 3° aliphatic amines only form a salt; no N₂ |
| 38 | a | 1° and 2° amines: CH₃NH₂, (CH₃)₂NH, C₆H₅NH₂, C₆H₅NHCH₃ |
| 39 | d | 0.1 mol CH₃NHCOCH₃ (73) = 7.3 g; 0.05 mol diacetyl product (108 + 84 = 192) = 9.6 g |
| 40 | b | Direct nitration gives para 51%, meta 47%, ortho 2% |
| 41 | c | 2.25/45 = 0.05 mol N₂; 0.05 × 22.4 = 1.12 L |
| 42 | a | –NH₂ activates all o/p positions, so three Br enter at once |
| 43 | d | Protect, brominate (para favoured), deprotect |
| 44 | c | No carbylamine = not 1°; nitrosamine and acylation = 2°: C₆H₅NHCH₃ |
| 45 | b | 0.1 mol aniline needs 0.3 mol Br₂ = 48 g; 0.1 × 330 = 33.0 g product |