Chapter 2 of 11 · 5 min read

Exam Strategy

This unit usually gives about 3–5 of the 45 NEET Physics questions, most of them short numericals on fields, charged particles and the galvanometer. Learn the six field formulas cold, then drill direction rules and ratio tricks until each question takes under a minute.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1: Magnetic Field and Biot–Savart Law1–2HighLoops, arcs and wire combinations appear almost every year
2: Ampere's Circuital Law0–1MediumSolenoid field and field inside a thick wire are favourites
3: Force on a Moving Charge1–2HighRadius, period, helix, velocity selector and cyclotron are quick marks
4: Force on Conductors and Between Parallel Currents0–1MediumParallel-wire force and force on bent wires
5: Torque on a Current Loop and the Moving Coil Galvanometer1HighShunt and series-resistance numericals are near-certain
6: Magnetic Dipoles and Bar Magnets0–1MediumAxial/equatorial field, torque and work on a dipole
7: Magnetic Materials0–1MediumStatement-based questions on dia, para, ferro and Curie law

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • Field at the centre of loops and arcs: B = μ₀NI/(2R) and the arc fraction θ/2π; combinations of arcs with straight leads.

  • Long straight wire: B = μ₀I/(2πd), the right-hand thumb rule, and the zero-field point between two wires.

  • Finite and semi-infinite wires: the (sin φ₁ + sin φ₂) formula; square and triangular loops.

  • Solenoid and toroid: B = μ₀nI inside, half at the ends, μ₀NI/(2πr) in a toroid, zero outside.

  • Field inside and outside a thick wire: B ∝ r inside, B ∝ 1/r outside; the graph of B against r.

  • Circular motion of charges: r = mv/(qB) = √(2mK)/(qB), period independent of speed; ratios for proton, deuteron, alpha.

  • Helix and crossed fields: pitch = v cos θ × T; velocity selector v = E/B.

  • Cyclotron: frequency qB/(2πm) and maximum KE q²B²R²/(2m).

  • Force between parallel wires: F/L = μ₀I₁I₂/(2πd), attraction for like currents.

  • Galvanometer conversion: shunt S = I_gG/(I − I_g), series R = V/I_g − G; sensitivity formulas.

  • Dipole fields and energy: axial 2× equatorial, τ = mB sin θ, W = mB(1 − cos θ).

  • Magnetic materials: sign and size of χ, Curie law, Curie temperature, hysteresis terms, soft iron vs steel.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalFind B, r, T, F, S or R from given dataWrite the formula first, put powers of ten in at the end, use μ₀/4π = 10⁻⁷
ConceptualDirection of field or force, effect of doubling a quantityUse the thumb rule or v × B with axes; use proportionality, not full calculation
Statement-based"How many of the following are correct?"Mark each statement T or F in the margin before reading options
Match-the-columnFour configurations matched with four formulasFix the surest pair first, then strike options that conflict
Assertion–ReasonA fact plus a claimed causeJudge A and R separately, then ask whether R alone explains A
Graph/diagram-basedB against r, χ against T, B–H loopsRecall the law behind the curve (B ∝ r, χ ∝ 1/T, area = energy loss)

Study plan

DayWhat to studyPractice target
1Chapter 1: Biot–Savart, wire, loop, arcsWorked examples + Q1–22 of Chapter 1
2Chapter 1 hard combinations; Chapter 2: Ampere's law, thick wire, solenoid, toroidChapter 1 Q23–45; Chapter 2 Q1–22
3Chapter 3: Lorentz force, circle, helix, velocity selector, cyclotronAll 45 Chapter 3 questions
4Chapter 4: force on wires, parallel currents, ampereAll 45 Chapter 4 questions + Chapter 2 Q23–45
5Chapter 5: torque on loop, galvanometer, ammeter and voltmeterAll 45 Chapter 5 questions
6Chapters 6 and 7: dipoles, bar magnets, magnetic materialsAll questions of both chapters
7Unit Test (50 min), then Mock Test 2 (35 min)Review every wrong answer; redo the matching worked example

Last 48 hours:

  1. Day −2: read every chapter revision sheet and the Book-at-a-glance sheet; rewrite the formula tables from memory once.

  2. Day −1 morning: redo only the questions you got wrong in the Unit Test and Mock Test 2; tick the Common mistakes checklist.

  3. Day −1 evening: read the 40 rapid-fire facts, then stop; sleep early.

Time-saving tricks

  • Rewinding a fixed wire: if a wire of fixed length is wound into n turns, the radius becomes R/n, so B at the centre grows as n² and the magnetic moment falls as 1/n.

  • Arc shortcut: field at the centre of any arc = (θ/2π) × μ₀I/(2R); straight leads pointing at the centre add nothing.

  • Particle ratios: r = p/(qB). For the same accelerating voltage, r ∝ √(m/q); for the same KE, r ∝ √m/q; for the same momentum, r ∝ 1/q.

  • Period check: T = 2πm/(qB) has no v or r in it; strike any option where the period changes with speed.

  • No work done: a pure magnetic field never changes speed or KE; strike options that say it does.

  • Meter conversion: for a range n times I_g, shunt S = G/(n − 1); for a voltmeter n times I_gG, series R = (n − 1)G.

  • Dipole ratio: at equal distances, axial field = 2 × equatorial field for a short magnet or loop.

  • Curie law in one line: χ₁T₁ = χ₂T₂ for a paramagnet; for M at a new field and temperature use M ∝ B/T.

5 min left
‹
›