Chapter 8 of 11 · 22 min read

Chapter 6: Entropy and the Second Law

What you will learn

  • What a spontaneous process is, and why a fall in enthalpy alone cannot predict it.

  • What entropy measures and how to predict the sign of ΔS.

  • How to calculate ΔS for phase changes, gas expansion and reactions.

  • How ΔS of the surroundings depends on ΔH of the system.

  • The second law: ΔS of the universe as the test for spontaneity.

  • The third law and absolute entropies.

6.1 Spontaneous processes

A spontaneous process is one that, once started, goes on by itself without continuous outside help. Water flows downhill. Heat flows from hot chai to the cooler cup. A drop of ink spreads through a glass of water. Iron rusts in humid air.

The reverse of each of these does not happen on its own. To push water uphill, you need a pump running all the time. Such changes are non-spontaneous.

Two points to keep clear:

  • Spontaneous does not mean fast. Diamond turning into graphite is spontaneous at room conditions but takes millions of years.

  • Some spontaneous changes need a start. LPG does not burn until a spark lights it, but after that it keeps burning.

6.2 Is a fall in enthalpy enough?

Many spontaneous reactions are exothermic, like burning fuels. So one might guess that a change is spontaneous whenever ΔH is negative.

This guess fails. Ice melts on its own on a warm day, though melting is endothermic. NH₄Cl dissolves in water and the beaker turns cold. Water in a matka evaporates and cools the rest. All of these are spontaneous with ΔH > 0.

So a second factor must decide spontaneity. That factor is entropy.

6.3 Entropy

Entropy, S, measures how widely the energy and matter of a system are spread out, often described as its degree of randomness or disorder. Gas molecules in a room can be arranged in vastly more ways than molecules locked in a crystal. So a gas has higher entropy than its solid.

Entropy is a state function and an extensive property. Its SI unit is J K⁻¹; molar entropy is in J K⁻¹ mol⁻¹.

The change in entropy is defined using heat exchanged reversibly:

ΔS=qrevT\Delta S = \frac{q_{rev}}{T}

The same heat causes a bigger entropy change at low T than at high T. Adding heat to a cold, orderly system disturbs it more, like a sneeze in a quiet library compared with a sneeze in a busy railway station.

6.4 Predicting the sign of ΔS

Entropy increases when:

  • a solid melts or a liquid vaporises (S: solid < liquid < gas),

  • a solid or liquid dissolves (usually),

  • temperature rises,

  • a gas expands into a larger volume,

  • a reaction produces more moles of gas (Δn₍g₎ > 0),

  • one molecule breaks into several.

ChangeSign of ΔSReason
H₂O(s) → H₂O(l)PositiveSolid becomes liquid
I₂(s) → I₂(g)PositiveSolid becomes gas
CaCO₃(s) → CaO(s) + CO₂(g)PositiveGas formed from a solid
N₂(g) + 3H₂(g) → 2NH₃(g)Negative4 mol gas becomes 2 mol
Ag⁺(aq) + Cl⁻(aq) → AgCl(s)NegativeIons combine into a solid
H₂(g) → 2H(g)PositiveOne particle becomes two

6.5 Calculating ΔS

Phase change at its transition temperature. At the melting or boiling point the change is reversible, and qₚ,ᵣₑᵥ = ΔH.

ΔfusS=ΔfusHTf,ΔvapS=ΔvapHTb\Delta_{fus}S = \frac{\Delta_{fus}H}{T_f}, \qquad \Delta_{vap}S = \frac{\Delta_{vap}H}{T_b}

For water, ΔfusS = 6010/273 = 22.0 J K⁻¹ mol⁻¹ and ΔvapS = 40 700/373 = 109 J K⁻¹ mol⁻¹. Vaporisation raises entropy far more, because a gas is far more spread out than a liquid.

Isothermal expansion of an ideal gas. ΔU = 0, so qᵣₑᵥ = −wᵣₑᵥ = nRT ln(V₂/V₁). Dividing by T,

ΔS=nRln⁡V2V1=2.303 nRlog⁡V2V1=2.303 nRlog⁡p1p2\Delta S = nR\ln\frac{V_2}{V_1} = 2.303\,nR\log\frac{V_2}{V_1} = 2.303\,nR\log\frac{p_1}{p_2}

Because S is a state function, this ΔS of the gas is the same whether the expansion is reversible or not.

Heating at constant pressure (no phase change): ΔS = nCₚ ln(T₂/T₁).

Reaction entropy from standard molar entropies. Every substance has a positive absolute entropy S° (see the third law below). Unlike ΔfH°, the S° of an element is not zero.

ΔrS∘=∑ν S∘(products)−∑ν S∘(reactants)\Delta_r S^\circ = \sum \nu\, S^\circ(\text{products}) - \sum \nu\, S^\circ(\text{reactants})
SubstanceS° at 298 K (J K⁻¹ mol⁻¹)
C(diamond)2.4
C(graphite)5.7
Fe(s)27.3
H₂O(l)69.9
H₂(g)130.7
H₂O(g)188.8
N₂(g)191.6
NH₃(g)192.5
O₂(g)205.1
CO₂(g)213.7

6.6 Entropy of the surroundings

The surroundings are huge, like a reservoir. Heat that enters them barely changes their temperature, so it behaves like reversible heat. At constant T and p, the heat the surroundings gain is the heat the system loses: q(surr) = −ΔH(sys).

ΔSsurr=−ΔHsysT\Delta S_{surr} = -\frac{\Delta H_{sys}}{T}

An exothermic reaction (ΔH < 0) warms the surroundings and raises their entropy. An endothermic one lowers it. The effect is larger at low temperature.

6.7 The second law of thermodynamics

Second law: in any spontaneous process, the total entropy of the universe increases.

ΔSuniv=ΔSsys+ΔSsurr\Delta S_{univ} = \Delta S_{sys} + \Delta S_{surr}
ΔS(univ)Meaning
Greater than 0Process is spontaneous
Equal to 0System is at equilibrium; process is reversible
Less than 0Process is non-spontaneous; the reverse is spontaneous

For an isolated system there are no surroundings to exchange with, so ΔS(univ) = ΔS(sys). A spontaneous change in an isolated system always raises its entropy, and entropy is at its maximum at equilibrium.

Now the melting of ice makes sense. Melting raises ΔS(sys) by 22.0 J K⁻¹ mol⁻¹ but lowers ΔS(surr) by 6010/T. Above 273 K the gain wins; below 273 K the loss wins.

6.8 The third law of thermodynamics

Third law: the entropy of a perfectly crystalline pure substance is zero at absolute zero (0 K). At 0 K every particle sits in a perfect lattice with no motion to disturb it, so there is only one way to arrange it.

This gives a zero point, so absolute entropies S° can be measured from heat capacity data. That is why tables list S° values, not just changes.

Some solids keep a small entropy at 0 K because they are not perfectly ordered. In solid CO, each molecule can point as CO or OC at random. Ice and N₂O show similar “residual entropy.”

Worked examples

Worked example 6.1: ΔfusH of ice is 6.01 kJ mol⁻¹ at 273 K. Find ΔfusS.

Solution: ΔfusS = 6010/273 = 22.0 J K⁻¹ mol⁻¹. Convert kJ to J first.

Worked example 6.2: Predict the sign of ΔS: (i) 2SO₂(g) + O₂(g) → 2SO₃(g), (ii) NH₄Cl(s) → NH₃(g) + HCl(g), (iii) sugar dissolving in tea.

Solution: (i) 3 mol gas → 2 mol gas: negative. (ii) Solid → 2 mol gas: positive. (iii) Ordered crystal spreads through the liquid: positive.

Worked example 6.3: Using S° values from 6.5, find ΔrS° for N₂(g) + 3H₂(g) → 2NH₃(g).

Solution: ΔrS° = 2(192.5) − [191.6 + 3(130.7)] = 385.0 − 583.7 = −198.7 J K⁻¹. Negative, as fewer gas moles form.

Worked example 6.4: For the reaction in 6.3, ΔrH° = −92.2 kJ at 298 K. Find ΔS(surr) and ΔS(univ). Is it spontaneous?

Solution: ΔS(surr) = −(−92 200)/298 = +309.4 J K⁻¹. ΔS(univ) = −198.7 + 309.4 = +110.7 J K⁻¹. Positive, so the reaction is spontaneous at 298 K. It is still slow without a catalyst.

Worked example 6.5: 2 mol of an ideal gas doubles its volume at 300 K. Find ΔS of the gas, the surroundings and the universe if (i) the expansion is reversible, (ii) the gas expands freely into vacuum.

Solution: ΔS(gas) = 2 × 8.314 × ln 2 = +11.5 J K⁻¹ in both cases, since S is a state function. (i) Reversible: the gas absorbs qᵣₑᵥ from the surroundings, so ΔS(surr) = −11.5 J K⁻¹ and ΔS(univ) = 0. (ii) Free expansion: q = 0, so ΔS(surr) = 0 and ΔS(univ) = +11.5 J K⁻¹. The process is spontaneous.

Worked example 6.6: Benzene has ΔvapH = 30.8 kJ mol⁻¹ and boils at 353 K. Find ΔvapS.

Solution: ΔvapS = 30 800/353 = 87.3 J K⁻¹ mol⁻¹.

Worked example 6.7 (NEET-hard): For melting of ice take ΔH = +6.01 kJ mol⁻¹ and ΔS = +22.0 J K⁻¹ mol⁻¹, both nearly constant near 0 °C. Find ΔS(univ) at −10 °C and at +10 °C.

Solution: At 263 K: ΔS(surr) = −6010/263 = −22.85. ΔS(univ) = 22.0 − 22.85 = −0.85 J K⁻¹ mol⁻¹. Ice does not melt. At 283 K: ΔS(surr) = −6010/283 = −21.24. ΔS(univ) = 22.0 − 21.24 = +0.76 J K⁻¹ mol⁻¹. Ice melts. At 273 K the two terms balance, which is why 0 °C is the melting point.

Quick revision

  • Spontaneous means it goes on by itself; it says nothing about speed.

  • ΔH < 0 alone does not decide spontaneity; endothermic changes can be spontaneous.

  • ΔS = qᵣₑᵥ/T. S is a state function and extensive. S: solid < liquid < gas.

  • ΔfusS = ΔfusH/Tᶠ; ΔvapS = ΔvapH/Tᵇ. Ideal gas, isothermal: ΔS = nR ln(V₂/V₁).

  • ΔS(surr) = −ΔH(sys)/T.

  • Second law: ΔS(univ) > 0 for spontaneous, = 0 at equilibrium.

  • Third law: S = 0 for a perfect crystal at 0 K; S° of elements is not zero.

NEET traps

  • Taking S° of an element as zero, as with ΔfH°. Only ΔfH° and ΔfG° of elements are zero.

  • Dividing kJ by K and reporting J K⁻¹. Convert ΔH to joules first.

  • Using °C for T in ΔS = q/T.

  • Thinking ΔS(sys) must be positive for every spontaneous change. Freezing below 0 °C has ΔS(sys) < 0 but is spontaneous.

  • Equating spontaneous with fast.

  • Forgetting that free expansion has ΔS(gas) > 0 even though q = 0.

Practice MCQs: Chapter 6

Level 1: Concept check

1. Entropy is a measure of (a) heat content (b) the spreading out or randomness of a system (c) internal energy (d) work done

2. The SI unit of molar entropy is (a) J mol⁻¹ (b) J K mol⁻¹ (c) J K⁻¹ mol⁻¹ (d) kJ mol⁻¹

3. For water, the correct order of molar entropy is (a) vapour > liquid > ice (b) ice > liquid > vapour (c) liquid > vapour > ice (d) all equal

4. For a spontaneous process in an isolated system, ΔS is (a) negative (b) zero (c) positive (d) undefined

5. By the third law, the entropy of a perfect crystal at 0 K is (a) infinite (b) negative (c) R ln 2 (d) zero

6. At constant T and p, the entropy change of the surroundings is (a) ΔH(sys)/T (b) −ΔH(sys)/T (c) TΔH(sys) (d) −TΔH(sys)

7. Which process has a negative ΔS of the system? (a) Melting of ice (b) Evaporation of water (c) Dissolving sugar in water (d) Freezing of water

8. Entropy is (a) a state function and extensive (b) a path function (c) intensive (d) a state function and intensive

9. A spontaneous process is one that (a) is always fast (b) proceeds without continuous outside help (c) is always exothermic (d) never needs a start

10. The relation ΔS = q/T applies when q is (a) any heat exchanged (b) heat in adiabatic changes only (c) heat exchanged reversibly (d) heat in irreversible changes only

Level 2: NEET standard

11. ΔfusH of ice is 6.01 kJ mol⁻¹ at 273 K. ΔfusS is about (a) 22.0 J K⁻¹ mol⁻¹ (b) 2.20 J K⁻¹ mol⁻¹ (c) 220 J K⁻¹ mol⁻¹ (d) 0.022 J K⁻¹ mol⁻¹

12. For which reaction is ΔS positive? (a) N₂(g) + 3H₂(g) → 2NH₃(g) (b) CaCO₃(s) → CaO(s) + CO₂(g) (c) Ag⁺(aq) + Cl⁻(aq) → AgCl(s) (d) H₂O(g) → H₂O(l)

13. Benzene boils at 353 K with ΔvapH = 30.8 kJ mol⁻¹. ΔvapS is about (a) 8.73 J K⁻¹ mol⁻¹ (b) 0.0873 J K⁻¹ mol⁻¹ (c) 87.3 J K⁻¹ mol⁻¹ (d) 873 J K⁻¹ mol⁻¹

14. S° values (J K⁻¹ mol⁻¹): N₂ 191.6, H₂ 130.7, NH₃ 192.5. ΔrS° for N₂(g) + 3H₂(g) → 2NH₃(g) is (a) +198.7 J K⁻¹ (b) −129.8 J K⁻¹ (c) −8.5 J K⁻¹ (d) −198.7 J K⁻¹

15. 1 mol of an ideal gas doubles its volume isothermally and reversibly. ΔS of the gas is about (a) +5.76 J K⁻¹ (b) zero (c) +11.5 J K⁻¹ (d) −5.76 J K⁻¹

16. A system releases 50 kJ of heat to its surroundings at 300 K and constant pressure. ΔS(surr) is about (a) −166.7 J K⁻¹ (b) +166.7 J K⁻¹ (c) +0.167 J K⁻¹ (d) −0.167 J K⁻¹

17. 1 mol of an ideal gas expands freely into a vacuum and doubles its volume at constant T. ΔS(univ) is about (a) zero (b) −5.76 J K⁻¹ (c) +11.5 J K⁻¹ (d) +5.76 J K⁻¹

18. Which has the highest standard molar entropy at 298 K? (a) C(diamond) (b) Fe(s) (c) CO₂(g) (d) H₂O(l)

19. For a reversible process, ΔS(univ) is (a) positive (b) zero (c) negative (d) infinite

20. Which combination gives ΔS(univ) > 0 at every temperature? (a) ΔH < 0, ΔS(sys) > 0 (b) ΔH > 0, ΔS(sys) < 0 (c) ΔH < 0, ΔS(sys) < 0 (d) ΔH > 0, ΔS(sys) > 0

21. S° of O₂(g) is 205 J K⁻¹ mol⁻¹. The standard entropy of 64 g of O₂ is (a) 205 J K⁻¹ (b) 102.5 J K⁻¹ (c) 410 J K⁻¹ (d) 820 J K⁻¹

22. Which is a spontaneous endothermic process? (a) Rusting of iron (b) Burning of LPG (c) Freezing of water at −5 °C (d) Dissolving NH₄Cl in water

Level 3: Challenge

23. For melting of ice, ΔH = +6.01 kJ mol⁻¹ and ΔS = +22.0 J K⁻¹ mol⁻¹. At −10 °C, ΔS(univ) and the nature of melting are (a) +0.85 J K⁻¹ mol⁻¹, spontaneous (b) −0.85 J K⁻¹ mol⁻¹, non-spontaneous (c) zero, at equilibrium (d) +44.9 J K⁻¹ mol⁻¹, spontaneous

24. A liquid has ΔvapH = 30.8 kJ mol⁻¹ and ΔvapS = 87.3 J K⁻¹ mol⁻¹. At 1 bar, liquid and vapour are in equilibrium at about (a) 273 K (b) 298 K (c) 353 K (d) 403 K

25. 3 mol of an ideal gas expands isothermally from 10 L to 30 L. ΔS of the gas is about (a) +27.4 J K⁻¹ (b) +9.13 J K⁻¹ (c) +12.0 J K⁻¹ (d) −27.4 J K⁻¹

26. For N₂(g) + 3H₂(g) → 2NH₃(g) at 298 K, ΔH = −92.2 kJ and ΔS(sys) = −198.7 J K⁻¹. ΔS(univ) is about (a) −508.1 J K⁻¹ (b) −110.7 J K⁻¹ (c) +309.4 J K⁻¹ (d) +110.7 J K⁻¹

27. Which solid has non-zero entropy at 0 K? (a) A perfect NaCl crystal (b) A perfect diamond (c) Solid CO with molecules randomly oriented as CO or OC (d) A perfect argon crystal

28. Which statement about a spontaneous process is correct? (a) ΔS(sys) must be positive (b) ΔS(sys) may be negative if ΔS(surr) is larger and positive (c) ΔS(univ) may be negative (d) ΔS(surr) is always zero

29. Assertion (A): When ice melts at 0 °C and 1 atm, ΔS(univ) = 0. Reason (R): At 0 °C and 1 atm ice and water are in equilibrium, so melting there is a reversible change. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: All spontaneous processes are exothermic. Statement II: Evaporation of water at room temperature is spontaneous and endothermic. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bEntropy tracks dispersal of energy and matter.
2cHeat per kelvin per mole.
3aGas is most spread out.
4cSecond law for an isolated system.
5dOnly one arrangement at 0 K.
6bSurroundings gain what system loses.
7dLiquid becomes ordered solid.
8aDepends on state and on amount.
9bDefinition of spontaneity.
10cDefinition uses reversible heat.
11a6010/273.
12bA gas forms from a solid.
13c30 800/353.
14d385.0 − 583.7.
15aR ln 2 = 8.314 × 0.693.
16b−(−50 000)/300.
17dΔS(surr) = 0 in free expansion.
18cOnly gas in the list.
19bReversible means equilibrium throughout.
20aBoth terms positive.
21c2 mol × 205.
22dAbsorbs heat yet dissolves on its own.
23b22.0 − 6010/263 = −0.85.
24cT = 30 800/87.3 = 353 K.
25a3 × 8.314 × ln 3.
26d−198.7 + 309.4.
27cRandom orientation leaves residual entropy.
28bOnly ΔS(univ) must be positive.
29aReversible change gives ΔS(univ) = 0.
30dEndothermic changes can be spontaneous.

Chapter 6 revision sheet

One-page summary

  • A spontaneous process happens on its own once started, without outside help. It need not be fast.

  • Decrease in enthalpy alone cannot predict spontaneity: ice melts above 0 °C even though melting is endothermic.

  • Entropy S measures how widely energy and matter are spread out (the number of ways the system can be arranged). It is an extensive state function, unit J K⁻¹.

  • ΔS = q_rev/T. Use the heat of a reversible path even when the actual change is irreversible.

  • Entropy rises when a solid melts, a liquid boils, a gas expands, a solid dissolves, gases mix, temperature rises, or a reaction makes more moles of gas.

  • Phase change at the transition temperature: ΔtrsS = ΔtrsH/Ttrs. Water: ΔfusS = 22.0 J K⁻¹ mol⁻¹, ΔvapS = 109 J K⁻¹ mol⁻¹.

  • Ideal gas, isothermal: ΔS = nR ln(V₂/V₁). Heating at constant p: ΔS = nCₚ,ₘ ln(T₂/T₁).

  • Surroundings at constant T and p: ΔS_surr = −ΔH_sys/T.

  • Second law: for a spontaneous process, ΔS_total = ΔS_sys + ΔS_surr > 0. At equilibrium ΔS_total = 0.

  • The entropy of an isolated system increases in any spontaneous change.

  • Third law: the entropy of a perfectly crystalline pure substance is zero at 0 K. This gives absolute S° values.

  • ΔrS° = ΣS°(products) − ΣS°(reactants). S° of elements is not zero.

ΔS=qrevTΔStotal=ΔSsys+ΔSsurr>0ΔSsurr=−ΔHsysT\Delta S = \frac{q_{rev}}{T} \qquad \Delta S_{total} = \Delta S_{sys} + \Delta S_{surr} > 0 \qquad \Delta S_{surr} = -\frac{\Delta H_{sys}}{T}

Must-remember table

SituationΔS formula or sign
Reversible adiabatic0
Isothermal ideal gasnR ln(V₂/V₁)
Heating at constant pnCₚ,ₘ ln(T₂/T₁)
Phase changeΔtrsH/Ttrs
Surroundings−ΔH_sys/T
More moles of gas formedPositive
Gas → liquid → solidNegative
Spontaneous change (total)Greater than zero

Memory aids

  • "Solid Sits, Liquid Lounges, Gas Goes wild": entropy order S(solid) < S(liquid) < S(gas).

  • "Q-rev over T": entropy always uses the reversible heat divided by kelvin temperature.

  • "Surroundings feel the opposite": an exothermic system warms its surroundings, so ΔS_surr = −ΔH_sys/T is positive.

  • "Zero at Zero": third law, a perfect crystal has S = 0 at 0 K.

Concept connections

  • The second law and heat engines are treated in Physics Book 8: Thermodynamics.

  • Entropy of mixing explains why solutes dissolve and why colligative properties exist, in Chemistry Book 5: Solutions.

  • Disorder of gas molecules connects to molecular motion in Physics Book 9: Kinetic Theory of Gases.

Practice MCQs: Chapter 6, Level 4 (new NEET pattern)

31. Match List I with List II.

  • List I: A. ΔS for a reversible adiabatic change; B. ΔfusS of ice at 273 K; C. ΔvapS of water at 373 K; D. ΔS_total for a spontaneous process

  • List II: (i) +109 J K⁻¹ mol⁻¹; (ii) Zero; (iii) Greater than zero; (iv) +22.0 J K⁻¹ mol⁻¹

(a) A-iii, B-iv, C-i, D-ii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iv, B-ii, C-i, D-iii

32. Match List I (law) with List II (statement).

  • List I: A. Second law; B. Third law; C. First law; D. Zeroth law

  • List II: (i) A perfect crystal has zero entropy at 0 K; (ii) ΔS_total > 0 for a spontaneous process; (iii) Two bodies in thermal equilibrium with a third are in thermal equilibrium with each other; (iv) Energy is conserved

(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-i, C-iii, D-iv (c) A-iv, B-i, C-ii, D-iii (d) A-ii, B-i, C-iv, D-iii

33. Match List I (change) with List II (ΔS of system).

  • List I: A. Isothermal reversible expansion of an ideal gas; B. Heating at constant pressure; C. Phase change at its transition temperature; D. Surroundings at constant T and p

  • List II: (i) nR ln(V₂/V₁); (ii) nCₚ,ₘ ln(T₂/T₁); (iii) ΔtrsH/Ttrs; (iv) −ΔH_sys/T

(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-ii, C-iv, D-iii (d) A-iv, B-ii, C-iii, D-i

34. Match List I (reaction) with List II (entropy change).

  • List I: A. CaCO₃(s) → CaO(s) + CO₂(g); B. N₂(g) + 3H₂(g) → 2NH₃(g); C. H₂(g) + I₂(g) → 2HI(g); D. Ag⁺(aq) + Cl⁻(aq) → AgCl(s)

  • List II: (i) Negative, as gas moles fall from 4 to 2; (ii) Positive, as a gas forms from a solid; (iii) Small, as gas moles do not change; (iv) Negative, as free ions form an ordered solid

(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-i, C-iii, D-iv (d) A-iii, B-i, C-ii, D-iv

35. How many of the following statements are correct?

  • A. Entropy is a state function.

  • B. The entropy of an isolated system increases during a spontaneous change.

  • C. A perfectly crystalline pure substance has zero entropy at 0 K.

  • D. ΔS of the system is always positive for a spontaneous process.

  • E. Diamond has a lower standard entropy than graphite.

(a) 4 (b) 3 (c) 5 (d) 2

36. Choose the correct set of statements.

  • A. When heat flows from a hot body to a cold body, total entropy increases.

  • B. ΔS = q_rev/T.

  • C. ΔS of the surroundings does not depend on their temperature.

  • D. For an irreversible change, ΔS of the system equals q_irr/T.

(a) A, B and C only (b) B and D only (c) A and B only (d) A, B, C and D

37. Choose the correct set of statements.

  • A. Mixing two ideal gases at the same T and p has ΔS > 0.

  • B. Dissolving NaCl in water usually increases entropy.

  • C. When water freezes, ΔS of the system is negative.

  • D. Below 0 °C, freezing is spontaneous because ΔS_surr is larger than the decrease in ΔS_sys.

  • E. The entropy of a substance decreases when it is heated.

(a) A, B and E only (b) C, D and E only (c) A and C only (d) A, B, C and D only

38. How many of the following comparisons of standard molar entropy (all at 298 K) are correct?

  • A. H₂O(g) > H₂O(l)

  • B. He(g) > Ne(g)

  • C. C₂H₆(g) > CH₄(g)

  • D. O₃(g) > O₂(g)

(a) 2 (b) 3 (c) 4 (d) 1

39. A graph shows the standard entropy of a pure substance against temperature from 0 K. The curve starts at zero, rises smoothly, jumps up vertically at the melting point, rises again, and jumps up vertically again at the boiling point. Which statement is correct?

(a) The curve should start at a positive value at 0 K. (b) The jump at melting is larger than the jump at boiling. (c) Entropy falls during boiling. (d) The jump at boiling is larger, because a gas is far more spread out than a liquid.

40. A table gives S° (J K⁻¹ mol⁻¹): N₂(g) 191.6; H₂(g) 130.7; NH₃(g) 192.5. ΔrS° for N₂(g) + 3H₂(g) → 2NH₃(g) is

(a) −198.7 J K⁻¹ mol⁻¹ (b) +198.7 J K⁻¹ mol⁻¹ (c) −129.8 J K⁻¹ mol⁻¹ (d) +62.7 J K⁻¹ mol⁻¹

41. A table lists ΔvapH and boiling point: benzene, 30.8 kJ mol⁻¹, 353 K; water, 40.7 kJ mol⁻¹, 373 K; CCl₄, 30.0 kJ mol⁻¹, 350 K. Which liquid has the largest ΔvapS, and why?

(a) Benzene, because it has the largest ΔvapH (b) CCl₄, because it has the lowest boiling point (c) Water, about 109 J K⁻¹ mol⁻¹, because hydrogen bonding makes the liquid unusually ordered (d) All three are equal at about 87 J K⁻¹ mol⁻¹

Case for Q42–43. 2 mol of an ideal gas at 300 K expands isothermally from 5 L to 50 L. Use R = 8.314 J K⁻¹ mol⁻¹.

42. If the expansion is reversible, ΔS of the gas is

(a) +19.1 J K⁻¹ (b) +38.3 J K⁻¹ (c) −38.3 J K⁻¹ (d) zero

43. If instead the gas expands freely into a vacuum inside an insulated container, ΔS_total is

(a) zero (b) −38.3 J K⁻¹ (c) +19.1 J K⁻¹ (d) +38.3 J K⁻¹

44. 2 mol of liquid water is heated at constant pressure from 300 K to 350 K. Taking Cₚ,ₘ = 75.3 J K⁻¹ mol⁻¹, ΔS is about

(a) +23.2 J K⁻¹ (b) +11.6 J K⁻¹ (c) +25.1 J K⁻¹ (d) −23.2 J K⁻¹

45. 1200 J of heat flows from a large reservoir at 400 K to another large reservoir at 300 K. The total entropy change is

(a) −1.0 J K⁻¹ (b) +7.0 J K⁻¹ (c) +1.0 J K⁻¹ (d) zero

Level 4 answer key

QAnsReason
31bq_rev = 0 gives ΔS = 0; 6010/273 = 22.0; 40 700/373 = 109; second law.
32dStandard statements of the four laws.
33aFormulas from this chapter.
34cCount gas moles and judge order: A gains a gas, B loses 2 mol of gas, C keeps 2 mol, D forms a solid from ions.
35aA, B, C, E correct. ΔS_sys can be negative (water freezing below 0 °C); only ΔS_total must be positive.
36cΔS_surr = −ΔH/T depends on T (C wrong); for irreversible change ΔS > q_irr/T (D wrong).
37dHeating always raises entropy, so E is wrong.
38bA, C, D correct. Ne is heavier and has more closely spaced energy levels, so S°(Ne) > S°(He).
39dΔvapS (about 109 for water) is much larger than ΔfusS (about 22); third law makes S = 0 at 0 K.
40a2(192.5) − [191.6 + 3(130.7)] = 385.0 − 583.7 = −198.7 J K⁻¹ mol⁻¹.
41cBenzene 30 800/353 = 87.3; water 40 700/373 = 109.1; CCl₄ 30 000/350 = 85.7.
42bΔS = nR ln(V₂/V₁) = 2 × 8.314 × ln 10 = 38.3 J K⁻¹.
43dS is a state function, so ΔS_gas = +38.3 J K⁻¹; no heat reaches the surroundings, so ΔS_surr = 0.
44aΔS = 2 × 75.3 × ln(350/300) = 23.2 J K⁻¹. 25.1 uses ΔH/T with T = 300 K, which is wrong for a changing T.
45cΔS = −1200/400 + 1200/300 = −3.0 + 4.0 = +1.0 J K⁻¹.
22 min left
‹
›