Chapter 7 of 11 · 26 min read

Chapter 5: Enthalpies of Different Types

What you will learn

  • Standard enthalpy of formation, and how to get ΔrH° from formation data.

  • Enthalpy of combustion and the calorific value of fuels.

  • Atomization, bond dissociation and mean bond enthalpies, and how to estimate ΔrH from bonds.

  • Ionization enthalpy, lattice enthalpy and the Born–Haber cycle.

  • Enthalpies of hydration and solution, and how they link to lattice enthalpy.

  • Enthalpy of neutralisation and of ionization of weak electrolytes.

5.1 Standard enthalpy of formation

The standard enthalpy of formation, ΔfH°, is the enthalpy change when 1 mol of a compound forms from its elements, each in its most stable (reference) form at 1 bar.

C(graphite)+O2(g)→CO2(g)ΔfH∘=−393.5 kJ mol−1\mathrm{C(graphite) + O_2(g) \rightarrow CO_2(g)} \qquad \Delta_f H^\circ = -393.5\ \text{kJ mol}^{-1}

By convention, ΔfH° of every element in its reference state is zero. So ΔfH° of O₂(g), H₂(g), C(graphite), Br₂(l) and Na(s) is zero. It is not zero for O₃(g), C(diamond) or Br₂(g).

Not every equation that makes 1 mol of a compound is a formation equation. CaO(s) + CO₂(g) → CaCO₃(s) makes 1 mol of CaCO₃, but from compounds, not elements.

SubstanceΔfH° at 298 K (kJ mol⁻¹)
CaCO₃(s)−1206.9
Fe₂O₃(s)−824.2
CaO(s)−635.1
NaCl(s)−411.2
CO₂(g)−393.5
H₂O(l)−285.8
H₂O(g)−241.8
CO(g)−110.5
HCl(g)−92.3
CH₄(g)−74.8
NH₃(g)−46.1
C(diamond)+1.9
NO₂(g)+33.2
C₆H₆(l)+49.0
C₂H₄(g)+52.3
NO(g)+90.3
O₃(g)+142.7

A negative ΔfH° means the compound is lower in enthalpy than its elements. Compounds with positive ΔfH°, like NO and benzene, are called endothermic compounds.

ΔrH° from formation data. Imagine breaking the reactants into elements and then building the products from them. By Hess's law,

ΔrH∘=∑ν ΔfH∘(products)−∑ν ΔfH∘(reactants)\Delta_r H^\circ = \sum \nu \, \Delta_f H^\circ(\text{products}) - \sum \nu \, \Delta_f H^\circ(\text{reactants})

Here ν is the coefficient of each substance in the balanced equation.

5.2 Enthalpy of combustion

The standard enthalpy of combustion, ΔcH°, is the enthalpy change when 1 mol of a substance burns completely in oxygen, all reactants and products in their standard states. Carbon goes to CO₂(g), hydrogen to H₂O(l). Combustion is always exothermic, so ΔcH° is always negative.

Calorific value (fuel value) is the heat released per gram of fuel. It decides how much fuel an LPG cylinder or a CNG auto-rickshaw must carry.

FuelΔcH° (kJ mol⁻¹)Molar mass (g mol⁻¹)Calorific value (kJ g⁻¹)
Hydrogen, H₂−285.82.0142.9
Methane (CNG), CH₄−890.316.055.6
Butane (LPG), C₄H₁₀−287858.149.5
Graphite (coal, roughly), C−393.512.032.8
Ethanol, C₂H₅OH−136746.029.7

Hydrogen has the highest calorific value of all fuels, but it is hard to store and transport.

Food energy works the same way. Glucose releases about 2808 kJ mol⁻¹, or roughly 15.6 kJ g⁻¹, when fully oxidised in the body.

5.3 Enthalpy of atomization

The enthalpy of atomization, ΔaH, is the enthalpy change when 1 mol of a substance is broken completely into separate gaseous atoms. It is always positive.

ProcessΔaH (kJ mol⁻¹)Note
H₂(g) → 2H(g)436Equals the H–H bond dissociation enthalpy
CH₄(g) → C(g) + 4H(g)1656Four C–H bonds broken
Na(s) → Na(g)108Equals the enthalpy of sublimation of sodium

For a diatomic element, atomization means breaking one bond per molecule. For a metal, atomization is the same as sublimation.

5.4 Bond enthalpies

Breaking a bond always needs energy. Forming a bond always releases energy.

Bond dissociation enthalpy is the enthalpy change to break 1 mol of a particular bond in gaseous molecules into gaseous atoms or fragments. For a diatomic molecule like Cl₂ there is only one bond, so the value is exact.

Cl2(g)→2Cl(g)ΔbondH∘=+242 kJ mol−1\mathrm{Cl_2(g) \rightarrow 2Cl(g)} \qquad \Delta_{bond}H^\circ = +242\ \text{kJ mol}^{-1}

Mean bond enthalpy. In a polyatomic molecule, identical bonds do not break with the same energy. In water, removing the first H needs about 502 kJ mol⁻¹ and the second about 427 kJ mol⁻¹. We use the average, about 464 kJ mol⁻¹, as the O–H bond enthalpy. A C–H bond also has slightly different values in different molecules. Tables list average values.

BondMean bond enthalpy (kJ mol⁻¹)BondMean bond enthalpy (kJ mol⁻¹)
H–H436C–C347
Cl–Cl242C=C611
O=O498C≡C837
N≡N946C=O (in CO₂)799
H–Cl431O–H464
C–H414N–H391

Multiple bonds are stronger than single bonds between the same atoms.

Estimating ΔrH from bond enthalpies. Imagine every bond in the reactants broken (energy in) and every bond in the products formed (energy out). For a reaction in which all species are gases,

ΔrH∘=∑bond enthalpies of reactants−∑bond enthalpies of products\Delta_r H^\circ = \sum \text{bond enthalpies of reactants} - \sum \text{bond enthalpies of products}

Note the order: reactants minus products. This is the reverse of the formation-data formula. The result is approximate, because mean values are used. If any species is a liquid or solid, its enthalpy of vaporisation or sublimation must also be included.

5.5 Ionization enthalpy and electron gain enthalpy

The word “ionization” is used in two senses in this unit.

Ionization enthalpy of an atom, ΔiH, is the enthalpy needed to remove an electron from 1 mol of gaseous atoms. It is always positive.

Na(g)→Na+(g)+e−ΔiH=+496 kJ mol−1\mathrm{Na(g) \rightarrow Na^+(g) + e^-} \qquad \Delta_i H = +496\ \text{kJ mol}^{-1}

Electron gain enthalpy, ΔegH, is the enthalpy change when 1 mol of gaseous atoms each gain an electron. For chlorine it is negative, about −349 kJ mol⁻¹, because energy is released.

The second sense, ionization of a weak electrolyte in water, comes in Section 5.8.

5.6 Lattice enthalpy and the Born–Haber cycle

The lattice enthalpy of an ionic solid is the enthalpy change when 1 mol of the solid separates into its gaseous ions.

NaCl(s)→Na+(g)+Cl−(g)ΔlatticeH∘=+787 kJ mol−1\mathrm{NaCl(s) \rightarrow Na^+(g) + Cl^-(g)} \qquad \Delta_{lattice}H^\circ = +787\ \text{kJ mol}^{-1}

With this definition, lattice enthalpy is positive. It cannot be measured directly, so we use a Hess's law cycle called the Born–Haber cycle. We reach NaCl(s) from the elements by two routes.

Direct route: Na(s) + ½Cl₂(g) → NaCl(s), ΔfH° = −411 kJ mol⁻¹.

Step route:

  1. Sublimation of sodium: Na(s) → Na(g), +108 kJ mol⁻¹.

  2. Ionization of sodium: Na(g) → Na⁺(g) + e⁻, +496 kJ mol⁻¹.

  3. Half the bond dissociation of chlorine: ½Cl₂(g) → Cl(g), +121 kJ mol⁻¹.

  4. Electron gain by chlorine: Cl(g) + e⁻ → Cl⁻(g), −349 kJ mol⁻¹.

  5. Ions pack into the lattice: Na⁺(g) + Cl⁻(g) → NaCl(s), −(lattice enthalpy).

Both routes give the same total.

ΔfH∘=ΔsubH+ΔiH+12ΔbondH+ΔegH−ΔlatticeH\Delta_f H^\circ = \Delta_{sub}H + \Delta_i H + \tfrac{1}{2}\Delta_{bond}H + \Delta_{eg}H - \Delta_{lattice}H
ΔlatticeH=108+496+121−349−(−411)=+787 kJ mol−1\Delta_{lattice}H = 108 + 496 + 121 - 349 - (-411) = +787\ \text{kJ mol}^{-1}
Figure 5.1 · Born–Haber cycle for NaCl, energies in kJ mol⁻¹ (levels to scale)
Figure 5.1 · Born–Haber cycle for NaCl, energies in kJ mol⁻¹ (levels to scale)

Climb from the elements to the gaseous ions (+108 + 496 + 121 − 349 = +376), then fall to NaCl(s); that fall must be 787 kJ mol⁻¹ to land at ΔfH° = −411.

Lattice enthalpy rises with higher ionic charges and smaller ions. MgO (Mg²⁺ and O²⁻) has a lattice enthalpy of roughly 3800 kJ mol⁻¹, nearly five times that of NaCl.

5.7 Enthalpy of hydration and enthalpy of solution

The enthalpy of hydration, ΔhydH, is the enthalpy change when 1 mol of gaseous ions is surrounded by water molecules to form a very dilute solution. Water dipoles cling to the ions, so energy is released. ΔhydH is always negative.

Smaller ions with higher charge attract water more strongly. So the hydration enthalpy becomes more negative in the order K⁺ < Na⁺ < Li⁺, and Mg²⁺ is far more negative than Na⁺.

The enthalpy of solution, ΔsolH, is the enthalpy change when 1 mol of a substance dissolves in a large amount of solvent (infinite dilution, so adding more solvent gives no further heat).

Dissolving an ionic solid can be split into two imaginary steps: break the lattice into gaseous ions, then hydrate the ions.

ΔsolH∘=ΔlatticeH∘+ΔhydH∘\Delta_{sol}H^\circ = \Delta_{lattice}H^\circ + \Delta_{hyd}H^\circ

For NaCl, 787 + (−783) = +4 kJ mol⁻¹. The two large terms nearly cancel. So NaCl dissolves with only a slight cooling.

If hydration releases more than the lattice needs, dissolving is exothermic. Anhydrous CuSO₄ and NaOH warm the water. If the lattice needs more, dissolving is endothermic. NH₄NO₃ cools the water so much that it is used in instant cold packs.

5.8 Neutralisation and ionization of weak electrolytes

The enthalpy of neutralisation is the enthalpy change when 1 mol of water forms from an acid and a base in dilute solution.

For any strong acid with any strong base, both are fully ionised. The only real change is

H+(aq)+OH−(aq)→H2O(l)ΔH=−57.1 kJ mol−1\mathrm{H^+(aq) + OH^-(aq) \rightarrow H_2O(l)} \qquad \Delta H = -57.1\ \text{kJ mol}^{-1}

So HCl + NaOH and HNO₃ + KOH give the same value.

A weak acid like CH₃COOH is only slightly ionised. Part of the heat from neutralisation is used to ionise it first. This heat is the enthalpy of ionization of the weak electrolyte, and it is positive. So the observed value is less negative.

ΔionH=ΔneutH(weak)−(−57.1)\Delta_{ion}H = \Delta_{neut}H(\text{weak}) - (-57.1)

For CH₃COOH with NaOH, ΔneutH = −55.8 kJ mol⁻¹, so ΔionH = −55.8 + 57.1 = +1.3 kJ mol⁻¹.

5.9 Summary of enthalpy types

EnthalpyChange per moleUsual sign
Formation, ΔfH°Elements in reference forms → 1 mol compoundEither
Combustion, ΔcH°1 mol substance burns completely in O₂Negative
Atomization, ΔaH1 mol substance → gaseous atomsPositive
Bond dissociation1 mol of a bond broken in the gas phasePositive
Sublimation, ΔsubHSolid → gasPositive
Fusion and vaporisationSolid → liquid; liquid → gasPositive
Ionization of atom, ΔiHGaseous atom → gaseous cation + e⁻Positive
Ionization of weak electrolyteWeak acid or base ionises in waterPositive
Lattice, ΔlatticeH1 mol ionic solid → gaseous ionsPositive
Hydration, ΔhydHGaseous ions → hydrated ionsNegative
Solution, ΔsolH1 mol solute dissolves at infinite dilutionEither
NeutralisationAcid + base → 1 mol waterNegative

Worked examples

Worked example 5.1: Using the table in 5.1, find ΔrH° for CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l).

Solution: ΔrH° = [−393.5 + 2(−285.8)] − [−74.8 + 2(0)] = −965.1 + 74.8 = −890.3 kJ mol⁻¹.

Worked example 5.2: Find ΔrH° for the blast furnace reaction Fe₂O₃(s) + 3CO(g) → 2Fe(s) + 3CO₂(g).

Solution: Products: 2(0) + 3(−393.5) = −1180.5. Reactants: −824.2 + 3(−110.5) = −1155.7. ΔrH° = −1180.5 − (−1155.7) = −24.8 kJ.

Worked example 5.3: Per gram, which releases more heat on burning, H₂ or CH₄?

Solution: H₂: 285.8/2.0 = 142.9 kJ g⁻¹. CH₄: 890.3/16.0 = 55.6 kJ g⁻¹. Hydrogen gives about 2.6 times as much heat per gram, though methane gives more per mole.

Worked example 5.4: ΔaH of CH₄(g) is 1656 kJ mol⁻¹. Find the mean C–H bond enthalpy.

Solution: Atomizing CH₄ breaks four C–H bonds. Mean C–H = 1656/4 = 414 kJ mol⁻¹.

Worked example 5.5: Use bond enthalpies to estimate ΔrH for H₂(g) + Cl₂(g) → 2HCl(g), and so ΔfH of HCl.

Solution: Bonds broken: 436 + 242 = 678. Bonds formed: 2 × 431 = 862. ΔrH = 678 − 862 = −184 kJ. This forms 2 mol HCl, so ΔfH ≈ −92 kJ mol⁻¹, close to the table value −92.3.

Worked example 5.6: Estimate ΔrH for C₂H₄(g) + H₂(g) → C₂H₆(g).

Solution: Broken: one C=C (611), four C–H, one H–H (436). Formed: one C–C (347), six C–H. The four C–H bonds cancel, leaving two new C–H formed. ΔrH = (611 + 436) − (347 + 2 × 414) = 1047 − 1175 = −128 kJ mol⁻¹.

Worked example 5.7: Use the Born–Haber data in 5.6 to confirm the lattice enthalpy of NaCl.

Solution: −411 = 108 + 496 + 121 − 349 − ΔlatticeH. So ΔlatticeH = 108 + 496 + 121 − 349 + 411 = 787 kJ mol⁻¹.

Worked example 5.8: For KCl, ΔlatticeH = +717 kJ mol⁻¹ and ΔsolH = +17.2 kJ mol⁻¹. Find the combined hydration enthalpy of K⁺ and Cl⁻.

Solution: ΔhydH = ΔsolH − ΔlatticeH = 17.2 − 717 = −699.8 kJ mol⁻¹.

Worked example 5.9 (NEET-hard): ΔfH° of NH₃(g) is −46 kJ mol⁻¹. Bond enthalpies: N≡N 946, H–H 436 kJ mol⁻¹. Find the N–H bond enthalpy.

Solution: Target: ½N₂(g) + (3/2)H₂(g) → NH₃(g). Broken: ½(946) + (3/2)(436) = 473 + 654 = 1127. Formed: 3x. −46 = 1127 − 3x, so 3x = 1173 and x = 391 kJ mol⁻¹.

Quick revision

  • ΔfH° of an element in its reference form is zero.

  • ΔrH° = ΣνΔfH°(products) − ΣνΔfH°(reactants).

  • From bonds: ΔrH = ΣBE(reactants) − ΣBE(products), gases only, approximate.

  • ΔcH° is always negative; calorific value = heat per gram. H₂ has the highest.

  • Born–Haber: ΔfH° = ΔsubH + ΔiH + ½ΔbondH + ΔegH − ΔlatticeH.

  • ΔsolH = ΔlatticeH + ΔhydH. Hydration is always exothermic.

  • Strong acid + strong base: −57.1 kJ mol⁻¹. Weak acids give less heat; the gap is ΔionH.

NEET traps

  • Using products minus reactants with bond enthalpies. With bonds it is reactants minus products.

  • Treating ΔfH° of O₃, diamond or Br₂(g) as zero.

  • Writing H₂O(g) instead of H₂O(l) in combustion. Standard combustion forms liquid water.

  • Forgetting to multiply ΔfH° by the coefficient in the balanced equation.

  • Taking lattice enthalpy as negative in a cycle that defines it as positive. Read the definition given.

  • Expecting every acid–base pair to give −57.1 kJ mol⁻¹. Weak acids or bases give less.

Practice MCQs: Chapter 5

Level 1: Concept check

1. The standard enthalpy of formation of an element in its reference state is (a) positive (b) negative (c) dependent on temperature only (d) zero

2. Which substance has ΔfH° = 0 at 298 K? (a) C(diamond) (b) O₃(g) (c) Br₂(l) (d) Br₂(g)

3. The standard enthalpy of combustion is (a) always positive (b) always negative (c) zero (d) either sign

4. With the definition used in this book, lattice enthalpy is (a) positive (b) negative (c) zero (d) either sign

5. Breaking a covalent bond in the gas phase is (a) exothermic (b) athermic (c) endothermic (d) either

6. The enthalpy of neutralisation of a strong acid by a strong base is about (a) +57.1 kJ mol⁻¹ (b) −57.1 kJ mol⁻¹ (c) −13.7 kJ mol⁻¹ (d) −285.8 kJ mol⁻¹

7. The hydration enthalpy of gaseous ions is (a) positive (b) zero (c) positive for cations only (d) negative

8. Calorific value of a fuel is usually expressed in (a) kJ g⁻¹ (b) kJ mol⁻¹ (c) J K⁻¹ (d) J mol⁻¹ K⁻¹

9. The enthalpy of atomization of hydrogen refers to (a) H₂(g) → 2H⁺(g) (b) 2H(g) → H₂(g) (c) H₂(g) → 2H(g) (d) H(g) → H⁺(g) + e⁻

10. The ionization enthalpy of a gaseous atom is (a) always positive (b) always negative (c) zero for metals (d) negative for alkali metals

Level 2: NEET standard

11. ΔfH° values (kJ mol⁻¹): CH₄ −74.8, CO₂ −393.5, H₂O(l) −285.8. ΔcH° of CH₄ is (a) −802.3 kJ mol⁻¹ (b) −890.3 kJ mol⁻¹ (c) −965.1 kJ mol⁻¹ (d) −752.5 kJ mol⁻¹

12. ΔfH° of NH₃(g) is −46.1 kJ mol⁻¹. ΔrH° for N₂(g) + 3H₂(g) → 2NH₃(g) is (a) −46.1 kJ (b) +92.2 kJ (c) −92.2 kJ (d) −138.3 kJ

13. Bond enthalpies: H–H 436, Cl–Cl 242, H–Cl 431 kJ mol⁻¹. ΔrH for H₂(g) + Cl₂(g) → 2HCl(g) is (a) −184 kJ (b) −92 kJ (c) +184 kJ (d) −247 kJ

14. ΔaH of H₂O(g) is 928 kJ mol⁻¹. The mean O–H bond enthalpy is (a) 928 kJ mol⁻¹ (b) 232 kJ mol⁻¹ (c) 464 kJ mol⁻¹ (d) 309 kJ mol⁻¹

15. Which has the highest lattice enthalpy? (a) NaCl (b) KCl (c) CsI (d) MgO

16. For NaCl, ΔlatticeH = +787 and ΔhydH = −783 kJ mol⁻¹. ΔsolH is (a) −1570 kJ mol⁻¹ (b) +4 kJ mol⁻¹ (c) −4 kJ mol⁻¹ (d) +1570 kJ mol⁻¹

17. Which gaseous ion has the most negative hydration enthalpy? (a) Li⁺ (b) Na⁺ (c) K⁺ (d) Cs⁺

18. Which fuel releases the most heat per gram? (ΔcH° in kJ mol⁻¹: CH₄ −890, C₂H₅OH −1367, C −393.5, H₂ −286) (a) CH₄ (b) C₂H₅OH (c) Graphite (d) H₂

19. The enthalpy of neutralisation of CH₃COOH by NaOH is −55.8 kJ mol⁻¹. The enthalpy of ionization of CH₃COOH is (a) −1.3 kJ mol⁻¹ (b) +1.3 kJ mol⁻¹ (c) +112.9 kJ mol⁻¹ (d) −112.9 kJ mol⁻¹

20. ΔfH° values (kJ mol⁻¹): Fe₂O₃ −824.2, CO −110.5, CO₂ −393.5. ΔrH° for Fe₂O₃(s) + 3CO(g) → 2Fe(s) + 3CO₂(g) is (a) −24.8 kJ (b) +24.8 kJ (c) −1180.5 kJ (d) −493.2 kJ

21. Bond enthalpies (kJ mol⁻¹): C=C 611, C–C 347, C–H 414, H–H 436. ΔrH for C₂H₄(g) + H₂(g) → C₂H₆(g) is about (a) +128 kJ (b) −264 kJ (c) −128 kJ (d) −347 kJ

22. ΔfH° values (kJ mol⁻¹): CaCO₃ −1206.9, CaO −635.1, CO₂ −393.5. ΔrH° for CaCO₃(s) → CaO(s) + CO₂(g) is (a) −178.3 kJ (b) +965.3 kJ (c) −2235.5 kJ (d) +178.3 kJ

Level 3: Challenge

23. ΔfH° of H₂O(g) = −241.8 kJ mol⁻¹; bond enthalpies H–H 436, O=O 498 kJ mol⁻¹. The O–H bond enthalpy is about (a) 926.8 kJ mol⁻¹ (b) 463.4 kJ mol⁻¹ (c) 342.6 kJ mol⁻¹ (d) 231.7 kJ mol⁻¹

24. For KCl: ΔsubH(K) = 89, ΔiH(K) = 419, ½ΔbondH(Cl₂) = 121, ΔegH(Cl) = −349, ΔfH°(KCl) = −437 kJ mol⁻¹. The lattice enthalpy of KCl is (a) 157 kJ mol⁻¹ (b) 1415 kJ mol⁻¹ (c) 717 kJ mol⁻¹ (d) 543 kJ mol⁻¹

25. Bond enthalpies (kJ mol⁻¹): C–H 414, O=O 498, C=O 799, O–H 464. ΔrH for CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g) is about (a) −802 kJ (b) −890 kJ (c) +802 kJ (d) −618 kJ

26. For NaCl: ΔsolH = +4, ΔlatticeH = +787, ΔhydH(Na⁺) = −406 kJ mol⁻¹. ΔhydH(Cl⁻) is (a) +377 kJ mol⁻¹ (b) −1189 kJ mol⁻¹ (c) −381 kJ mol⁻¹ (d) −377 kJ mol⁻¹

27. The enthalpy of neutralisation of HCN by NaOH is −12.1 kJ mol⁻¹. The enthalpy of ionization of HCN is (a) −45.0 kJ mol⁻¹ (b) +45.0 kJ mol⁻¹ (c) +69.2 kJ mol⁻¹ (d) −69.2 kJ mol⁻¹

28. Which of these is NOT always negative? (a) Enthalpy of combustion (b) Hydration enthalpy of gaseous ions (c) Enthalpy of formation (d) Enthalpy of neutralisation

29. Assertion (A): The enthalpy of neutralisation of HCl by NaOH equals that of HNO₃ by KOH. Reason (R): For any strong acid and strong base in dilute solution, the net reaction is H⁺(aq) + OH⁻(aq) → H₂O(l). (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Bond enthalpy calculations give exact ΔrH values even for reactions involving liquids. Statement II: The mean C–H bond enthalpy can be found by dividing ΔaH of CH₄ by four. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dReference states are set to zero.
2cBr₂(l) is bromine's standard form.
3bCombustion releases heat.
4aSeparating ions needs energy.
5cBond breaking needs energy.
6bH⁺ + OH⁻ → H₂O value.
7dIon–dipole attraction releases energy.
8aHeat per gram of fuel.
9cMolecule broken into gaseous atoms.
10aRemoving an electron needs energy.
11b−393.5 − 571.6 + 74.8.
12c2 × (−46.1).
13a678 − 862.
14cTwo O–H bonds: 928/2.
15d2+ and 2− ions, small radii.
16b787 + (−783).
17aSmallest cation, strongest hydration.
18d286/2 = 143 kJ g⁻¹.
19b−55.8 + 57.1.
20a−1180.5 − (−1155.7).
21c1047 − 1175.
22d−635.1 − 393.5 + 1206.9.
23b436 + 249 − 2x = −241.8.
24c89 + 419 + 121 − 349 + 437.
25a2652 − 3454.
26d4 − 787 + 406.
27b−12.1 + 57.1.
28cSome compounds, like NO, have positive ΔfH°.
29aSame net ionic reaction.
30dBond values are averages; liquids need extra terms.

Chapter 5 revision sheet

One-page summary

  • Enthalpy of combustion, ΔcH: 1 mol of substance burns completely in oxygen. Always negative.

  • Enthalpy of atomisation, ΔaH: 1 mol of substance breaks fully into gaseous atoms. Always positive.

  • Phase changes at constant T and p: ΔfusH (solid → liquid), ΔvapH (liquid → gas), ΔsubH (solid → gas). ΔsubH = ΔfusH + ΔvapH at the same temperature.

  • For water: ΔfusH = 6.01 kJ mol⁻¹ at 273 K; ΔvapH = 40.7 kJ mol⁻¹ at 373 K.

  • Bond dissociation enthalpy: energy to break 1 mol of a given bond in the gas phase. For polyatomic molecules we use mean bond enthalpies.

  • From bond enthalpies (all gases): ΔrH = Σ bonds broken − Σ bonds formed.

  • Enthalpy of neutralisation of a strong acid by a strong base ≈ −57.1 kJ mol⁻¹ (it is just H⁺ + OH⁻ → H₂O).

  • A weak acid or base gives a less negative value (CH₃COOH ≈ −55.8 kJ mol⁻¹) because some heat ionises it. HF gives a more negative value because F⁻ is strongly hydrated.

  • Lattice enthalpy (as defined in this book): NaCl(s) → Na⁺(g) + Cl⁻(g), positive, +787 kJ mol⁻¹ for NaCl. Higher charges and smaller ions give larger values.

  • Born–Haber cycle: ΔfH° = ΔsubH + ΔiH + ½ΔbondH + ΔegH − ΔlatticeH.

  • ΔsolH = ΔlatticeH + ΔhydH. Hydration is always exothermic.

  • Enthalpy of solution depends on how much solvent is used; at infinite dilution further dilution gives no heat change.

ΔrH=∑BE(bonds broken)−∑BE(bonds formed)ΔsolH=ΔlatticeH+ΔhydH\Delta_r H = \sum BE(\text{bonds broken}) - \sum BE(\text{bonds formed}) \qquad \Delta_{sol}H = \Delta_{lattice}H + \Delta_{hyd}H

Must-remember table

QuantityApproximate value
ΔfusH of water (273 K)6.01 kJ mol⁻¹
ΔvapH of water (373 K)40.7 kJ mol⁻¹
ΔneutH, strong acid + strong base−57.1 kJ mol⁻¹
ΔneutH, CH₃COOH + NaOH−55.8 kJ mol⁻¹
H–H bond enthalpy436 kJ mol⁻¹
ΔlatticeH of NaCl+787 kJ mol⁻¹
ΔsolH of NaCl+4 kJ mol⁻¹
ΔcH of CH₄−890 kJ mol⁻¹

Memory aids

  • "BBM: Broken minus Made": with bond enthalpies, ΔrH = bonds Broken minus bonds Made. (With ΔfH it is the other way: products minus reactants.)

  • "FuVa makes Sub": Fusion + Vaporisation = Sublimation.

  • "57 for strong, less for weak, more for HF": −57.1 kJ mol⁻¹ for strong pairs; weak acids give less heat; HF gives more.

  • "SIBEL" for Born–Haber: Sublimation, Ionisation, Bond breaking (half), Electron gain, Lattice.

Concept connections

  • Ionisation enthalpy and electron gain enthalpy trends are taught in Chemistry Book 9: Classification of Elements and Periodicity in Properties.

  • Bond enthalpy and bond strength link to Chemistry Book 3: Chemical Bonding and Molecular Structure.

  • Neutralisation of weak acids and hydration of ions continue in Chemistry Book 6: Equilibrium and Chemistry Book 5: Solutions.

Practice MCQs: Chapter 5, Level 4 (new NEET pattern)

31. Match List I (enthalpy) with List II (process).

  • List I: A. ΔsubH; B. ΔaH; C. ΔfusH; D. ΔlatticeH

  • List II: (i) I₂(s) → I₂(g); (ii) CH₄(g) → C(g) + 4H(g); (iii) H₂O(s) → H₂O(l); (iv) NaCl(s) → Na⁺(g) + Cl⁻(g)

(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-iv, C-iii, D-ii (d) A-iii, B-ii, C-i, D-iv

32. Match List I with List II (approximate values in kJ mol⁻¹).

  • List I: A. ΔfusH of water at 273 K; B. ΔvapH of water at 373 K; C. ΔneutH for a strong acid with a strong base; D. H–H bond enthalpy

  • List II: (i) −57.1; (ii) 6.01; (iii) 436; (iv) 40.7

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-i, B-iv, C-ii, D-iii

33. Match List I (neutralisation) with List II (enthalpy).

  • List I: A. HCl + NaOH; B. CH₃COOH + NaOH; C. H₂SO₄ + 2NaOH (per mol of acid); D. HF + NaOH

  • List II: (i) About −114 kJ per mol of acid; (ii) About −57 kJ mol⁻¹; (iii) Less exothermic than −57 kJ mol⁻¹, as some heat ionises the acid; (iv) More exothermic than −57 kJ mol⁻¹, due to strong hydration of F⁻

(a) A-iii, B-ii, C-i, D-iv (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-i, C-iii, D-iv (d) A-ii, B-iii, C-i, D-iv

34. Match the Born–Haber steps for NaCl (List I) with their enthalpies in kJ mol⁻¹ (List II).

  • List I: A. Sublimation of Na; B. Ionisation of Na(g); C. Half the bond dissociation of Cl₂; D. Electron gain by Cl(g)

  • List II: (i) +121; (ii) −349; (iii) +108; (iv) +496

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-i, B-iv, C-iii, D-ii

35. How many of the following statements are correct?

  • A. At the same temperature, ΔsubH = ΔfusH + ΔvapH.

  • B. Enthalpy of combustion is always negative.

  • C. All four C–H bonds of CH₄ need the same energy when broken one after another.

  • D. With the definition used in this book, ΔlatticeH of NaCl is +787 kJ mol⁻¹.

  • E. ΔsolH = ΔlatticeH + ΔhydH.

(a) 2 (b) 3 (c) 5 (d) 4

36. Choose the correct set of statements.

  • A. ΔsolH of NaCl is small and positive.

  • B. Hydration enthalpy of ions is negative.

  • C. Lattice enthalpy, as defined in this book, is negative.

  • D. A salt whose lattice enthalpy is much larger than its total hydration enthalpy dissolves endothermically.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

37. Choose the correct set of statements.

  • A. For water, ΔvapH is larger than ΔfusH.

  • B. ΔaH for H₂(g) → 2H(g) equals the H–H bond dissociation enthalpy.

  • C. ΔcH° of graphite equals ΔfH° of CO₂(g).

  • D. Ionisation enthalpy and electron gain enthalpy are both always positive.

  • E. Mean bond enthalpies are used for bonds in polyatomic molecules.

(a) A, B and C only (b) A, B, C and E only (c) B, D and E only (d) A, C, D and E only

38. How many of the following statements are correct?

  • A. Enthalpy of solution depends on the amount of solvent used.

  • B. At infinite dilution, adding more solvent gives no further heat change.

  • C. Enthalpy of dilution is always zero.

  • D. Diluting concentrated H₂SO₄ with water releases heat.

(a) 2 (b) 4 (c) 3 (d) 1

39. A table of bond enthalpies (kJ mol⁻¹) gives H–H 436, Cl–Cl 242, H–Cl 431. ΔrH for H₂(g) + Cl₂(g) → 2HCl(g) is

(a) +184 kJ (b) −184 kJ (c) +247 kJ (d) −92 kJ

40. A Born–Haber table for LiF gives (kJ mol⁻¹): ΔsubH(Li) = 159; ΔiH(Li) = 520; ½ΔbondH(F₂) = 79; ΔegH(F) = −328; ΔfH°(LiF) = −616. The lattice enthalpy of LiF (LiF(s) → Li⁺(g) + F⁻(g)) is

(a) +430 kJ mol⁻¹ (b) −1046 kJ mol⁻¹ (c) +186 kJ mol⁻¹ (d) +1046 kJ mol⁻¹

41. 1 mol of ice at 250 K is heated at a steady rate until it becomes steam at 400 K. On the graph of temperature against heat supplied there are two flat parts. The ratio (length of the flat part at 373 K)/(length of the flat part at 273 K) is about

(a) 6.8 (b) 1.0 (c) 0.15 (d) 22

Case for Q42–43. A tea stall heats 1.00 kg of water from 25 °C to 100 °C on a methane burner. Only 50% of the heat from burning reaches the water. Take c(water) = 4.18 J g⁻¹ K⁻¹ and ΔcH(CH₄) = −890 kJ mol⁻¹.

42. The heat absorbed by the water is

(a) 104.5 kJ (b) 418 kJ (c) 313.5 kJ (d) 627 kJ

43. The mass of methane burnt is about

(a) 5.6 g (b) 11.3 g (c) 22.5 g (d) 0.70 g

44. Given ΔaH of C(graphite) = 717 kJ mol⁻¹, bond enthalpy of H–H = 436 kJ mol⁻¹ and mean C–H bond enthalpy = 416 kJ mol⁻¹, ΔfH of CH₄(g) is about

(a) +75 kJ mol⁻¹ (b) −792 kJ mol⁻¹ (c) +797 kJ mol⁻¹ (d) −75 kJ mol⁻¹

45. A salt MX has ΔlatticeH = +650 kJ mol⁻¹. The hydration enthalpies are −380 kJ mol⁻¹ for M⁺ and −250 kJ mol⁻¹ for X⁻. Which statement is correct?

(a) ΔsolH = +20 kJ mol⁻¹; it can still dissolve on its own because entropy increases. (b) ΔsolH = −20 kJ mol⁻¹; dissolving is exothermic. (c) ΔsolH = +1280 kJ mol⁻¹. (d) ΔsolH = +20 kJ mol⁻¹, so it can never dissolve on its own.

Level 4 answer key

QAnsReason
31aEach process matches its definition: solid to gas, molecule to atoms, solid to liquid, solid to gaseous ions.
32cStandard values used in this chapter.
33dStrong pair −57; weak acid less; dibasic acid gives two moles of water, about −114; HF more exothermic.
34bValues from the NaCl Born–Haber cycle in section 5.6.
35dA, B, D, E correct. Successive C–H bond energies in CH₄ differ; we use a mean value.
36aLattice enthalpy (solid → gaseous ions) is positive, so C is wrong.
37bElectron gain enthalpy is negative for most elements (Cl: −349), so D is wrong.
38cA, B, D correct. Dilution of acids such as HCl or H₂SO₄ releases heat.
39bBroken: 436 + 242 = 678. Made: 2 × 431 = 862. ΔrH = 678 − 862 = −184 kJ.
40dΔlatticeH = 159 + 520 + 79 − 328 − (−616) = +1046 kJ mol⁻¹.
41aFlat parts are ΔvapH and ΔfusH: 40.7/6.01 = 6.8.
42cq = 1000 × 4.18 × 75 = 313 500 J = 313.5 kJ.
43bHeat from fuel = 313.5/0.50 = 627 kJ; n = 627/890 = 0.704 mol; mass = 0.704 × 16 = 11.3 g.
44dC(graphite) + 2H₂ → CH₄: ΔfH = 717 + 2(436) − 4(416) = −75 kJ mol⁻¹.
45aΔsolH = 650 − 380 − 250 = +20 kJ mol⁻¹. Endothermic dissolving can still be spontaneous when TΔS is large enough (Chapter 7).
26 min left
‹
›