Chapter 5 of 11 · 24 min read

Chapter 3: First Law, Enthalpy and Heat Capacity

What you will learn

  • The first law of thermodynamics and its special cases.

  • Why enthalpy is defined and why ΔH equals heat at constant pressure.

  • How to derive and use ΔH = ΔU + Δn₍g₎RT.

  • Heat capacity, specific heat and molar heat capacity, and Cp − Cv = R.

  • How a bomb calorimeter gives ΔU and a coffee-cup calorimeter gives ΔH.

3.1 The first law of thermodynamics

The first law is the law of conservation of energy applied to heat and work. It says: the energy of an isolated system is constant. Energy can change form, but it is neither created nor destroyed.

For a closed system that exchanges heat q and work w with its surroundings,

ΔU=q+w\Delta U = q + w

In a tiny step, dU = dq + dw. Here dU is an exact change of a state function, while dq and dw are small amounts along a path.

One result follows at once. No machine can keep producing work without taking in energy. Such a “perpetual motion machine of the first kind” would break the first law.

3.2 Special cases of the first law

SituationConditionFirst law becomes
Isolated systemq = 0, w = 0ΔU = 0
Adiabatic processq = 0ΔU = w
Isochoric process (pV work only)w = 0ΔU = qᵥ
Isothermal change of ideal gasΔU = 0q = −w
Cyclic processΔU = 0q = −w

In an adiabatic expansion w is negative, so ΔU is negative and the gas cools. This is why air escaping from a cycle tyre valve feels cold.

3.3 Enthalpy

Most reactions in a lab or a kitchen happen in open vessels, at constant atmospheric pressure. The volume may change, so some energy goes into pV work. We want a quantity that equals the heat exchanged at constant pressure. That quantity is enthalpy, H.

H=U+pVH = U + pV

U, p and V are state functions, so H is also a state function. It is extensive.

Derivation of ΔH = qₚ. At constant pressure, with only pV work, w = −pΔV. The first law gives

ΔU=qp−pΔV⇒qp=ΔU+pΔV\Delta U = q_p - p\Delta V \quad\Rightarrow\quad q_p = \Delta U + p\Delta V

From H = U + pV at constant p, ΔH = ΔU + pΔV. Comparing the two,

ΔH=qp\Delta H = q_p

In the same way, at constant volume w = 0 and ΔU = qᵥ.

A negative ΔH means heat is released: the change is exothermic. A positive ΔH means heat is absorbed: the change is endothermic.

3.4 Relation between ΔH and ΔU for reactions

Solids and liquids change volume very little. Gases change volume a lot. So in a reaction, only gaseous moles matter for pΔV.

At constant T and p, for an ideal gas, pVₐ = nₐRT for reactants and pVᵦ = nᵦRT for products.

pΔV=(nB−nA)RT=ΔngRTp\Delta V = (n_B - n_A)RT = \Delta n_g RT

Put this into ΔH = ΔU + pΔV.

ΔH=ΔU+ΔngRT\Delta H = \Delta U + \Delta n_g RT

Here Δn₍g₎ = (moles of gaseous products) − (moles of gaseous reactants), from the balanced equation.

Δn₍g₎RelationExample
ZeroΔH = ΔUH₂(g) + Cl₂(g) → 2HCl(g)
PositiveΔH > ΔUPCl₅(g) → PCl₃(g) + Cl₂(g)
NegativeΔH < ΔUN₂(g) + 3H₂(g) → 2NH₃(g)

Use R = 8.314 × 10⁻³ kJ K⁻¹ mol⁻¹ when ΔH is in kJ. At 298 K, RT = 2.478 kJ mol⁻¹.

3.5 Heat capacity

When a body absorbs heat, its temperature usually rises. The heat needed per kelvin rise is its heat capacity, C.

q=C ΔTq = C\,\Delta T

C depends on the amount, so it is extensive. Two intensive versions are used.

QuantityMeaningUnitEquation
Heat capacity, CHeat per kelvin for the whole sampleJ K⁻¹q = CΔT
Specific heat, cHeat per kelvin per gramJ g⁻¹ K⁻¹q = mcΔT
Molar heat capacity, CₘHeat per kelvin per moleJ mol⁻¹ K⁻¹q = nCₘΔT

For liquid water, c = 4.18 J g⁻¹ K⁻¹ and Cₘ = 75.3 J mol⁻¹ K⁻¹. Water's high specific heat is why coastal cities like Mumbai and Chennai have milder temperature swings than inland Delhi.

3.6 Cp, Cv and the relation Cp − Cv = R

Heat capacity depends on the conditions of heating.

  • At constant volume, qᵥ = ΔU = CᵥΔT.

  • At constant pressure, qₚ = ΔH = CₚΔT.

At constant pressure, part of the heat is used to push back the surroundings. So more heat is needed for the same rise in T, and Cₚ > Cᵥ.

Derivation for 1 mol of ideal gas. H = U + pV = U + RT. For a rise ΔT,

ΔH=ΔU+R ΔT\Delta H = \Delta U + R\,\Delta T

Substitute ΔH = CₚΔT and ΔU = CᵥΔT, then divide by ΔT.

Cp ΔT=Cv ΔT+R ΔT⇒Cp−Cv=RC_p\,\Delta T = C_v\,\Delta T + R\,\Delta T \quad\Rightarrow\quad C_p - C_v = R

Here Cₚ and Cᵥ are molar heat capacities. The ratio γ = Cₚ/Cᵥ is used in adiabatic problems.

Ideal gas typeCᵥCₚγ = Cₚ/Cᵥ
Monatomic (He, Ne, Ar)(3/2)R(5/2)R5/3 ≈ 1.67
Diatomic (N₂, O₂, H₂) near room temperature(5/2)R(7/2)R7/5 = 1.40

For n mol of an ideal gas in any process, ΔU = nCᵥΔT and ΔH = nCₚΔT, because U and H of an ideal gas depend only on T. In a reversible adiabatic change of an ideal gas, w = ΔU = nCᵥ(T₂ − T₁).

3.7 Calorimetry: bomb and coffee cup

Bomb calorimeter (constant volume). A weighed sample is sealed in a strong steel vessel, the bomb, filled with oxygen under pressure. The bomb sits in a known mass of water inside an insulated jacket. An electric spark ignites the sample. The heat released warms the bomb and water, and the rise ΔT is read on a thermometer.

The bomb is rigid, so ΔV = 0 and no pV work is done. The heat measured is qᵥ = ΔU.

qreleased=Ccal ΔT,ΔU=−Ccal ΔTnsampleq_{\text{released}} = C_{\text{cal}}\,\Delta T, \qquad \Delta U = -\frac{C_{\text{cal}}\,\Delta T}{n_{\text{sample}}}

C(cal), the heat capacity of the whole calorimeter, is found first by burning a standard such as benzoic acid.

Figure 3.1 · Bomb calorimeter (schematic)
Figure 3.1 · Bomb calorimeter (schematic)

The sample burns inside the rigid bomb, so no pV work is done; all the heat passes to the water and shows up as the rise ΔT.

Coffee-cup calorimeter (constant pressure). Two nested polystyrene cups with a lid, a stirrer and a thermometer. It is open to the atmosphere, so pressure is constant. The heat measured is qₚ = ΔH. It suits reactions in solution, like neutralisation.

FeatureBomb calorimeterCoffee-cup calorimeter
ConditionConstant volumeConstant pressure
MeasuresΔU (= qᵥ)ΔH (= qₚ)
Typical useCombustion of foods and fuelsNeutralisation, dissolution
BuildSealed steel bomb in water bathInsulated cups open to air
Gas allowed to escape?NoYes

From a bomb calorimeter value of ΔU, use ΔH = ΔU + Δn₍g₎RT to get ΔH.

Worked examples

Worked example 3.1: A gas absorbs 2.0 kJ of heat and expands from 3 L to 8 L against a constant pressure of 2 atm. Find ΔU. (1 L atm = 101.3 J)

Solution: w = −2 × (8 − 3) = −10 L atm = −1013 J. ΔU = q + w = 2000 − 1013 = +987 J.

Worked example 3.2: For N₂(g) + 3H₂(g) → 2NH₃(g), ΔH = −92.4 kJ at 298 K. Find ΔU.

Solution: Δn₍g₎ = 2 − 4 = −2. ΔU = ΔH − Δn₍g₎RT = −92.4 − (−2)(8.314 × 10⁻³)(298) = −92.4 + 4.96 = −87.4 kJ.

Worked example 3.3: For H₂O(l) → H₂O(g) at 373 K and 1 bar, ΔH = 40.7 kJ mol⁻¹. Find ΔU.

Solution: Δn₍g₎ = 1 (liquid volume ignored). ΔU = 40.7 − (1)(8.314 × 10⁻³)(373) = 40.7 − 3.10 = 37.6 kJ mol⁻¹. Some of the heat goes into pushing back the atmosphere as steam forms.

Worked example 3.4: How much heat is needed to warm 250 g of water for chai from 25 °C to 95 °C? (c = 4.18 J g⁻¹ K⁻¹)

Solution: q = mcΔT = 250 × 4.18 × 70 = 73 150 J ≈ 73.2 kJ. A change of 70 °C equals a change of 70 K.

Worked example 3.5: 3 mol of a diatomic ideal gas is heated at constant pressure from 300 K to 350 K. Find q, ΔU and w.

Solution: Cₚ = (7/2)R = 29.1 and Cᵥ = (5/2)R = 20.8 J mol⁻¹ K⁻¹. qₚ = ΔH = 3 × 29.1 × 50 = 4365 J ≈ 4.36 kJ. ΔU = 3 × 20.8 × 50 = 3118 J ≈ 3.12 kJ. w = ΔU − q = −1247 J, which equals −nRΔT. The gas does work as it expands.

Worked example 3.6: 1.20 g of glucose (M = 180 g mol⁻¹) is burnt in a bomb calorimeter of heat capacity 9.50 kJ K⁻¹. The temperature rises by 1.97 K. Find ΔcU and ΔcH of glucose.

Solution: Heat released = 9.50 × 1.97 = 18.72 kJ. Moles = 1.20/180 = 6.67 × 10⁻³ mol. ΔcU = −18.72 / 0.00667 = −2807 kJ mol⁻¹. For C₆H₁₂O₆(s) + 6O₂(g) → 6CO₂(g) + 6H₂O(l), Δn₍g₎ = 6 − 6 = 0. So ΔcH = ΔcU = −2807 kJ mol⁻¹.

Worked example 3.7: For C₂H₅OH(l) + 3O₂(g) → 2CO₂(g) + 3H₂O(l), a bomb calorimeter gives ΔU = −1364.5 kJ mol⁻¹ at 298 K. Find ΔH.

Solution: Δn₍g₎ = 2 − 3 = −1. ΔH = −1364.5 + (−1)(2.478) = −1367.0 kJ mol⁻¹.

Worked example 3.8: In a coffee-cup calorimeter, 50 mL of 1.0 M HCl is mixed with 50 mL of 1.0 M NaOH. The temperature rises by 6.8 K. Take the mass of solution as 100 g and c = 4.18 J g⁻¹ K⁻¹. Find ΔH per mole of water formed.

Solution: q = 100 × 4.18 × 6.8 = 2842 J released. Moles of water = 0.050. ΔH = −2842 / 0.050 = −56 840 J ≈ −56.8 kJ mol⁻¹.

Worked example 3.9 (NEET-hard): 2 mol of a monatomic ideal gas is heated at constant pressure from 300 K to 400 K. Find q, ΔU and w.

Solution: q = ΔH = 2 × (5/2)(8.314) × 100 = 4157 J. ΔU = 2 × (3/2)(8.314) × 100 = 2494 J. w = ΔU − q = −1663 J. Check: −nRΔT = −2 × 8.314 × 100 = −1663 J.

Quick revision

  • First law: ΔU = q + w. Energy of an isolated system is constant.

  • H = U + pV. At constant p, ΔH = qₚ. At constant V, ΔU = qᵥ.

  • ΔH = ΔU + Δn₍g₎RT, counting only gaseous moles.

  • q = CΔT = mcΔT = nCₘΔT. C is extensive; c and Cₘ are intensive.

  • Ideal gas: Cₚ − Cᵥ = R. Monatomic γ = 1.67; diatomic γ = 1.40.

  • For an ideal gas in any process, ΔU = nCᵥΔT and ΔH = nCₚΔT.

  • Bomb calorimeter gives ΔU; coffee-cup calorimeter gives ΔH.

NEET traps

  • Counting liquid or solid moles in Δn₍g₎. Only gases count.

  • Using R = 8.314 with ΔH in kJ. Use 8.314 × 10⁻³ kJ K⁻¹ mol⁻¹.

  • Thinking a bomb calorimeter gives ΔH directly. It gives ΔU.

  • Writing ΔU = nCₚΔT for an ideal gas at constant pressure. ΔU always uses Cᵥ.

  • Using °C values of T in RT. Always convert to kelvin; ΔT is the same in both.

  • Forgetting that heat released by a reaction means a negative ΔH or ΔU.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The first law of thermodynamics is a statement of (a) conservation of mass (b) conservation of energy (c) increase of entropy (d) constancy of temperature

2. Enthalpy is defined as (a) U − pV (b) U + TS (c) U + pV (d) G − pV

3. At constant pressure, with only pV work, the heat absorbed by a system equals (a) ΔH (b) ΔU (c) w (d) ΔG

4. At constant volume, with only pV work, the heat absorbed equals (a) ΔH (b) w (c) ΔG (d) ΔU

5. For one mole of an ideal gas, Cₚ − Cᵥ equals (a) 2R (b) R (c) R/2 (d) zero

6. A bomb calorimeter directly measures (a) ΔH (b) ΔU (c) ΔG (d) ΔS

7. The SI unit of molar heat capacity is (a) J K⁻¹ (b) J g⁻¹ K⁻¹ (c) J mol⁻¹ K⁻¹ (d) J mol⁻¹

8. For an isolated system, ΔU is (a) zero (b) equal to q (c) equal to w (d) always negative

9. The value of γ = Cₚ/Cᵥ for a monatomic ideal gas is about (a) 1.40 (b) 1.33 (c) 1.67 (d) 1.00

10. For a reaction in which Δn₍g₎ = 0, (a) ΔH > ΔU (b) ΔH < ΔU (c) ΔH = 0 (d) ΔH = ΔU

Level 2: NEET standard

11. For 2CO(g) + O₂(g) → 2CO₂(g) at 298 K, ΔH − ΔU is (a) +2.48 kJ (b) −2.48 kJ (c) −4.96 kJ (d) zero

12. For which reaction is ΔH = ΔU? (a) H₂(g) + Cl₂(g) → 2HCl(g) (b) N₂(g) + 3H₂(g) → 2NH₃(g) (c) PCl₅(g) → PCl₃(g) + Cl₂(g) (d) CaCO₃(s) → CaO(s) + CO₂(g)

13. Heat needed to warm 100 g of water from 20 °C to 70 °C (c = 4.18 J g⁻¹ K⁻¹) is (a) 4.18 kJ (b) 29.3 kJ (c) 20.9 kJ (d) 41.8 kJ

14. A gas absorbs 3.0 kJ of heat at a constant 1 atm and expands from 5 L to 15 L. ΔU is about (1 L atm = 101.3 J) (a) +1.99 kJ (b) +3.00 kJ (c) +4.01 kJ (d) +1.01 kJ

15. For an ideal gas, Cₚ = 29.1 J mol⁻¹ K⁻¹. Its Cᵥ is about (a) 37.4 J mol⁻¹ K⁻¹ (b) 20.8 J mol⁻¹ K⁻¹ (c) 12.5 J mol⁻¹ K⁻¹ (d) 29.1 J mol⁻¹ K⁻¹

16. For C₆H₆(l) + (15/2)O₂(g) → 6CO₂(g) + 3H₂O(l) at 298 K, ΔcU = −3264.0 kJ mol⁻¹. ΔcH is about (a) −3260.3 kJ mol⁻¹ (b) −3264.0 kJ mol⁻¹ (c) −3267.7 kJ mol⁻¹ (d) −3271.4 kJ mol⁻¹

17. Heat absorbed at constant pressure when 2 mol of a monatomic ideal gas is warmed by 50 K is about (a) 1.25 kJ (b) 2.91 kJ (c) 0.83 kJ (d) 2.08 kJ

18. A coffee-cup calorimeter directly measures (a) ΔH (b) ΔU (c) ΔG (d) w

19. 0.30 g of a compound X (M = 60 g mol⁻¹) is burnt in a bomb calorimeter of heat capacity 5.0 kJ K⁻¹. The temperature rises by 3.0 K. ΔcU of X is (a) −15 kJ mol⁻¹ (b) −300 kJ mol⁻¹ (c) −1500 kJ mol⁻¹ (d) −3000 kJ mol⁻¹

20. For 1 mol of an ideal gas heated at constant pressure, ΔH − ΔU equals (a) zero (b) CᵥΔT (c) RΔT (d) pΔT

21. For vaporisation of 1 mol of water at 373 K, ΔH = 40.7 kJ. ΔU is about (a) 43.8 kJ (b) 37.6 kJ (c) 40.7 kJ (d) 3.1 kJ

22. Molar heat capacity of liquid water is 75.3 J mol⁻¹ K⁻¹. Heat needed to warm 36 g of water by 10 K is (a) 753 J (b) 150.6 J (c) 3012 J (d) 1506 J

Level 3: Challenge

23. 2 mol of a diatomic ideal gas is heated at constant volume from 300 K to 400 K. ΔH for this change is about (a) 4.16 kJ (b) 5.82 kJ (c) 1.66 kJ (d) 7.48 kJ

24. 1 mol of a monatomic ideal gas expands adiabatically and its temperature falls from 400 K to 300 K. The work done on the gas is (a) −1247 J (b) +1247 J (c) −2079 J (d) zero

25. For C(graphite) + ½O₂(g) → CO(g) at 298 K, ΔH = −110.5 kJ mol⁻¹. ΔU is about (a) −109.3 kJ mol⁻¹ (b) −110.5 kJ mol⁻¹ (c) −111.7 kJ mol⁻¹ (d) −113.0 kJ mol⁻¹

26. A mixture contains 1 mol of a monatomic and 1 mol of a diatomic ideal gas. Its γ = Cₚ/Cᵥ is (a) 1.40 (b) 1.67 (c) 1.53 (d) 1.50

27. 100 mL of 0.5 M HCl is mixed with 100 mL of 0.5 M NaOH in a coffee-cup calorimeter. Take ΔH = −57.1 kJ mol⁻¹, mass 200 g and c = 4.18 J g⁻¹ K⁻¹. The temperature rise is about (a) 6.8 K (b) 3.4 K (c) 1.7 K (d) 13.7 K

28. Which statement is correct? (a) For a gas, Cₚ is less than Cᵥ (b) A bomb calorimeter gives ΔH directly (c) ΔH = ΔU for every combustion reaction (d) In isochoric heating of a gas, all the heat supplied raises U

29. Assertion (A): For N₂(g) + 3H₂(g) → 2NH₃(g), ΔH is more negative than ΔU. Reason (R): Δn₍g₎ is negative for this reaction, so ΔH = ΔU + Δn₍g₎RT is less than ΔU. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The molar heat capacity at constant pressure of a monatomic ideal gas is (3/2)R. Statement II: For any ideal gas, Cₚ − Cᵥ = R. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bEnergy is conserved.
2cH = U + pV.
3aqₚ = ΔH.
4dw = 0, so qᵥ = ΔU.
5bDerived from H = U + RT.
6bRigid bomb, constant volume.
7cHeat per mole per kelvin.
8aNo heat or work crosses.
9c(5/2)R divided by (3/2)R.
10dΔn₍g₎RT = 0.
11bΔn₍g₎ = −1; −1 × 2.478 kJ.
12a2 mol gas on each side.
13c100 × 4.18 × 50 = 20 900 J.
14aw = −1013 J; 3000 − 1013 = 1987 J.
15b29.1 − 8.3 = 20.8.
16cΔn₍g₎ = −1.5; −3264.0 − 3.7.
17d2 × 2.5 × 8.314 × 50 = 2079 J.
18aOpen to air, constant pressure.
19d15 kJ / 0.005 mol = 3000 kJ mol⁻¹ released.
20cΔ(pV) = RΔT for 1 mol.
21b40.7 − (8.314 × 10⁻³ × 373).
22d2 mol × 75.3 × 10.
23bnCₚΔT = 2 × 3.5 × 8.314 × 100 = 5820 J.
24aw = ΔU = 1.5 × 8.314 × (−100).
25cΔn₍g₎ = +0.5; −110.5 − 1.24.
26dCᵥ = 2R, Cₚ = 3R, γ = 1.5.
27b2855 J / (200 × 4.18) = 3.4 K.
28dw = 0, so qᵥ = ΔU.
29aNegative Δn₍g₎ lowers ΔH below ΔU.
30dCₚ of monatomic gas is (5/2)R.

Chapter 3 revision sheet

One-page summary

  • First law: energy can be neither created nor destroyed; the energy of an isolated system is constant. In symbols, ΔU = q + w.

  • A machine that makes energy from nothing (perpetual motion machine of the first kind) is impossible.

  • At constant volume with only pV work, w = 0, so qᵥ = ΔU. A bomb calorimeter measures ΔU.

  • Enthalpy H = U + pV. It is an extensive state function.

  • At constant pressure, qₚ = ΔH. Most lab reactions (open beakers) give ΔH.

  • ΔH = ΔU + pΔV; for gases, ΔH = ΔU + Δn₍g₎RT, counting only gaseous moles.

  • Δn₍g₎ = 0 gives ΔH = ΔU; Δn₍g₎ > 0 gives ΔH > ΔU; Δn₍g₎ < 0 gives ΔH < ΔU.

  • Heat capacity C = q/ΔT (extensive). Molar heat capacity Cₘ and specific heat c are intensive.

  • q = nCₘΔT = mcΔT.

  • For an ideal gas, Cₚ,ₘ − Cᵥ,ₘ = R.

  • Monatomic ideal gas: Cᵥ,ₘ = 3R/2, Cₚ,ₘ = 5R/2, γ = 5/3. Rigid diatomic: Cᵥ,ₘ = 5R/2, Cₚ,ₘ = 7R/2, γ = 7/5.

  • For an ideal gas any process: ΔU = nCᵥ,ₘΔT and ΔH = nCₚ,ₘΔT.

  • Reversible adiabatic change of an ideal gas: pV^γ = constant and TV^(γ−1) = constant.

H=U+pVΔH=ΔU+ΔngRTCp,m−CV,m=RH = U + pV \qquad \Delta H = \Delta U + \Delta n_g RT \qquad C_{p,m} - C_{V,m} = R

Must-remember table

QuantityFormula or valueUnit
q at constant VΔUJ or kJ
q at constant pΔHJ or kJ
ΔH − ΔUΔn₍g₎RT (RT = 2.478 kJ mol⁻¹ at 298 K)kJ mol⁻¹
Cₚ,ₘ − Cᵥ,ₘR = 8.314J K⁻¹ mol⁻¹
γ (monatomic)5/3 ≈ 1.67none
γ (rigid diatomic)7/5 = 1.40none
Cₚ,ₘ of liquid water75.3J K⁻¹ mol⁻¹
Specific heat of water4.18J g⁻¹ K⁻¹

Memory aids

  • "VU and PH": at constant V you get U (qᵥ = ΔU); at constant P you get H (qₚ = ΔH), like pH.

  • "Gas counts, rest rests": only gaseous moles go into Δn₍g₎; solids and liquids rest.

  • "3-5-7 halves": Cᵥ of monatomic is 3 half-R, Cₚ of monatomic and Cᵥ of diatomic are 5 half-R, Cₚ of diatomic is 7 half-R.

  • "Bomb = Box": a bomb calorimeter is a sealed box (constant V), so it gives ΔU.

Concept connections

  • Cₚ, Cᵥ and γ from degrees of freedom are derived in Physics Book 9: Kinetic Theory of Gases; adiabatic relations appear in Physics Book 8: Thermodynamics.

  • Δn₍g₎ also decides the relation between Kp and Kc in Chemistry Book 6: Equilibrium (Kp = Kc(RT)^Δn).

  • Moles of gas from a balanced equation use the stoichiometry of Chemistry Book 1: Some Basic Concepts in Chemistry.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I with List II.

  • List I: A. ΔH − ΔU; B. Cₚ,ₘ − Cᵥ,ₘ for an ideal gas; C. Heat absorbed at constant volume; D. Heat absorbed at constant pressure

  • List II: (i) ΔH; (ii) R; (iii) Δn₍g₎RT; (iv) ΔU

(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-i, D-iv (c) A-iii, B-ii, C-iv, D-i (d) A-iv, B-ii, C-iii, D-i

32. Match List I with List II (ideal gases, vibrations ignored).

  • List I: A. γ for a monatomic gas; B. γ for a diatomic gas; C. γ for a non-linear polyatomic gas (Cᵥ,ₘ = 3R); D. Cᵥ,ₘ for a monatomic gas

  • List II: (i) 5/3; (ii) 7/5; (iii) 4/3; (iv) 3R/2

(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-iii, C-ii, D-iv (d) A-iv, B-ii, C-iii, D-i

33. Match List I (reaction) with List II (Δn₍g₎).

  • List I: A. N₂(g) + 3H₂(g) → 2NH₃(g); B. H₂(g) + Cl₂(g) → 2HCl(g); C. CaCO₃(s) → CaO(s) + CO₂(g); D. 2CO(g) + O₂(g) → 2CO₂(g)

  • List II: (i) 0; (ii) −1; (iii) +1; (iv) −2

(a) A-ii, B-i, C-iii, D-iv (b) A-iv, B-i, C-iii, D-ii (c) A-iv, B-iii, C-i, D-ii (d) A-i, B-iv, C-ii, D-iii

34. 2 mol of a monatomic ideal gas is heated from 300 K to 400 K at constant pressure. Match List I with List II.

  • List I: A. ΔH; B. ΔU; C. w; D. Cₚ,ₘ

  • List II: (i) 20.8 J K⁻¹ mol⁻¹; (ii) +2.49 kJ; (iii) −1.66 kJ; (iv) +4.16 kJ

(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-iii, C-ii, D-i (c) A-i, B-ii, C-iii, D-iv (d) A-iv, B-ii, C-iii, D-i

35. How many of the following statements are correct?

  • A. For a reaction with only solids and liquids, ΔH ≈ ΔU.

  • B. For an ideal gas, Cₚ > Cᵥ.

  • C. Specific heat is an extensive property.

  • D. Enthalpy is a state function.

  • E. For C(graphite) + O₂(g) → CO₂(g), ΔH = ΔU.

(a) 3 (b) 4 (c) 5 (d) 2

36. Choose the correct set of statements about the first law.

  • A. The energy of an isolated system is constant.

  • B. It can be written as ΔU = q + w.

  • C. It rules out a machine that produces work without any energy input.

  • D. It tells us the direction in which a process will go.

(a) A and B only (b) B and D only (c) A, B, C and D (d) A, B and C only

37. Choose the correct set of statements about an adiabatic process of an ideal gas.

  • A. q = 0

  • B. The gas cools when it expands.

  • C. ΔU = w

  • D. pV^γ = constant holds even for an irreversible adiabatic change.

  • E. On a p–V graph its curve is steeper than the isotherm through the same point.

(a) A, B and D only (b) A, C and D only (c) A, B, C and E only (d) B, D and E only

38. How many of the following statements are correct?

  • A. Cₚ,ₘ − Cᵥ,ₘ = R holds for ideal gases.

  • B. The molar heat capacity of liquid water is about 75.3 J K⁻¹ mol⁻¹.

  • C. At constant volume, all the heat supplied goes into raising U.

  • D. The heat capacity of a sample does not depend on its amount.

(a) 3 (b) 2 (c) 4 (d) 1

39. A table gives ΔH − ΔU at 300 K for four gas-phase reactions: P, −4.99 kJ mol⁻¹; Q, 0; R, +2.49 kJ mol⁻¹; S, −2.49 kJ mol⁻¹. Which one is 2SO₂(g) + O₂(g) → 2SO₃(g)?

(a) P (b) Q (c) R (d) S

40. For 1 mol of an ideal gas heated at constant pressure, a graph of heat supplied (y-axis, J) against rise in temperature (x-axis, K) is a straight line through the origin with slope 29.1 J K⁻¹. The gas is most likely

(a) monatomic (b) diatomic (no vibration) (c) non-linear triatomic (d) impossible to tell from the slope

41. A table lists three samples, each heated by 50 K: water, 100 g, c = 4.18 J g⁻¹ K⁻¹; copper, 200 g, c = 0.385 J g⁻¹ K⁻¹; ethanol, 50 g, c = 2.44 J g⁻¹ K⁻¹. The order of heat needed is

(a) copper > water > ethanol (b) water > copper > ethanol (c) water > ethanol > copper (d) ethanol > water > copper

Case for Q42–43. A student burns 1.28 g of naphthalene, C₁₀H₈(s) (M = 128 g mol⁻¹), in a bomb calorimeter of heat capacity 10.3 kJ K⁻¹. The temperature rises by 5.00 K. The products are CO₂(g) and H₂O(l). Take RT = 2.478 kJ mol⁻¹ at 298 K.

42. The molar internal energy of combustion, ΔcU, is

(a) −5150 kJ mol⁻¹ (b) −51.5 kJ mol⁻¹ (c) −515 kJ mol⁻¹ (d) +5150 kJ mol⁻¹

43. The molar enthalpy of combustion, ΔcH, at 298 K is about

(a) −5145 kJ mol⁻¹ (b) −5150 kJ mol⁻¹ (c) −5160 kJ mol⁻¹ (d) −5155 kJ mol⁻¹

44. 1 mol of a diatomic ideal gas (γ = 1.4) at 300 K expands reversibly and adiabatically until its volume doubles. Its final temperature is about

(a) 227 K (b) 150 K (c) 189 K (d) 300 K

45. Ethanol boils at 351 K with ΔvapH = 38.6 kJ mol⁻¹. Treating the vapour as ideal and ignoring the liquid volume, ΔvapU at 351 K is about

(a) 38.6 kJ mol⁻¹ (b) 41.5 kJ mol⁻¹ (c) 35.7 kJ mol⁻¹ (d) 2.9 kJ mol⁻¹

Level 4 answer key

QAnsReason
31cH = U + pV gives ΔH − ΔU = Δn₍g₎RT; Mayer relation Cₚ − Cᵥ = R; qᵥ = ΔU; qₚ = ΔH.
32a5R/2 ÷ 3R/2 = 5/3; 7R/2 ÷ 5R/2 = 7/5; 4R ÷ 3R = 4/3.
33bGas moles: A 2 − 4; B 2 − 2; C 1 − 0; D 2 − 3.
34dΔH = 2 × 2.5 × 8.314 × 100 = 4157 J; ΔU = 2 × 1.5 × 8.314 × 100 = 2494 J; w = −nRΔT = −1663 J; Cₚ,ₘ = 2.5R = 20.8.
35bA, B, D, E correct (E has Δn₍g₎ = 1 − 1 = 0). Specific heat is intensive.
36dThe first law conserves energy but says nothing about direction; that needs the second law.
37cpV^γ = constant is valid only for a reversible adiabatic change of an ideal gas.
38aA, B, C correct. Heat capacity is extensive and doubles with amount.
39dΔn₍g₎ = 2 − 3 = −1; ΔH − ΔU = −RT = −8.314 × 300 = −2.49 kJ.
40bSlope = Cₚ,ₘ = 29.1 J K⁻¹ mol⁻¹ = 7R/2, the value for a diatomic gas.
41cq = mcΔT: water 20.9 kJ, ethanol 6.10 kJ, copper 3.85 kJ.
42aHeat released = 10.3 × 5.00 = 51.5 kJ for 0.0100 mol, so ΔcU = −5150 kJ mol⁻¹ (negative, as heat is released).
43dC₁₀H₈(s) + 12O₂(g) → 10CO₂(g) + 4H₂O(l): Δn₍g₎ = 10 − 12 = −2. ΔH = −5150 + (−2)(2.478) = −5155 kJ mol⁻¹.
44aT₂ = T₁(V₁/V₂)^(γ−1) = 300 × 0.5^0.4 = 227 K. 189 K is the monatomic answer.
45cΔU = ΔH − Δn₍g₎RT = 38.6 − (8.314 × 351)/1000 = 38.6 − 2.92 = 35.7 kJ mol⁻¹.
24 min left
‹
›