Chapter 4: Thermochemistry and Hess's Law
What you will learn
How to write and read a thermochemical equation.
What standard conditions and standard enthalpy of reaction mean.
How to draw enthalpy level diagrams for exothermic and endothermic changes.
Hess's law of constant heat summation and why it works.
How to combine equations to get an enthalpy that cannot be measured directly.
Enthalpies of fusion, vaporisation and sublimation.
4.1 Enthalpy of reaction
The enthalpy of reaction, ΔrH, is the enthalpy change when the amounts shown in a balanced equation react completely.
We cannot measure absolute enthalpies, but we can measure this difference with a calorimeter. The unit is kJ mol⁻¹, where “per mole” means per mole of the reaction as written.
4.2 Standard enthalpy of reaction
Enthalpy changes depend on temperature, pressure and the form of each substance. To compare data, we fix a standard state: the pure substance at 1 bar, in its most stable form at the stated temperature. Data are usually listed at 298 K.
A standard enthalpy change carries a degree sign: ΔrH°. For carbon the standard form is graphite, for oxygen it is O₂(g), and for bromine it is Br₂(l).
4.3 Thermochemical equations
A thermochemical equation is a balanced equation with physical states and the value of ΔrH. For example:
Rules for handling them:
Always write states (s, l, g, aq). Forming H₂O(l) releases more heat than forming H₂O(g).
Coefficients are moles, so fractions such as ½O₂ are allowed.
Multiply the equation by a number and ΔH is multiplied by the same number.
Reverse the equation and ΔH changes sign.
Add equations and their ΔH values add.
4.4 Exothermic and endothermic reactions
In an exothermic reaction, products have lower enthalpy than reactants. The difference is given out as heat, so ΔrH is negative. Burning LPG and setting of cement are exothermic.
In an endothermic reaction, products have higher enthalpy. Heat is taken in, so ΔrH is positive. Decomposing limestone in a kiln and photosynthesis are endothermic.

The arrow always runs from reactants to products: pointing down means ΔH is negative, pointing up means ΔH is positive.
4.5 Hess's law of constant heat summation
Hess's law: if a reaction takes place in several steps, the standard enthalpy of the overall reaction is the sum of the standard enthalpies of the steps. The total does not depend on the route.
Why it works. Enthalpy is a state function. Its change depends only on the initial and final states. So every route from the same reactants to the same products must give the same ΔH. If two routes gave different values, we could go out by one route and back by the other and create energy from nothing. That would break the first law.
For any closed cycle that returns to the start, the enthalpy changes add up to zero.
Classic use: enthalpy of formation of CO. Burning carbon in limited oxygen always gives a mix of CO and CO₂, so this value cannot be measured directly. Two values can be measured:
The direct route C → CO₂ equals the two-step route C → CO → CO₂. So ΔH₁ = ΔH₃ + ΔH₂, and

The top route and the lower two-step route join the same start and end, so their enthalpy totals must match; the one unknown step falls out by subtraction.
4.6 A method for Hess's law problems
Write the target equation clearly, with states.
Find a given equation that contains each substance of the target that appears only once in the data.
Reverse or multiply each given equation so that substance lands on the correct side with the correct coefficient. Change ΔH to match.
Add the adjusted equations. Cancel species that appear on both sides.
Check that the sum is exactly the target equation. Add the adjusted ΔH values.
4.7 Enthalpies of phase transition
A phase change at constant T and p also has an enthalpy change.
| Enthalpy | Change | Sign | Water value |
|---|---|---|---|
| Fusion, ΔfusH | solid → liquid at the melting point | Positive | 6.01 kJ mol⁻¹ at 273 K |
| Vaporisation, ΔvapH | liquid → gas at the boiling point | Positive | 40.7 kJ mol⁻¹ at 373 K |
| Sublimation, ΔsubH | solid → gas directly | Positive | about 51 kJ mol⁻¹ near 273 K |
The reverse changes, freezing, condensation and deposition, have the same size of ΔH with a negative sign.
By Hess's law, going solid → liquid → gas must equal going solid → gas directly, at the same temperature.
Vaporisation needs far more energy than fusion. In melting, molecules only loosen their hold on each other. In boiling, they must separate almost completely. Sweating cools us for the same reason: evaporating water takes a lot of heat from the skin.
Solids such as iodine, camphor and naphthalene (mothballs) sublime at room conditions.
Worked examples
Worked example 4.1: Given 2H₂(g) + O₂(g) → 2H₂O(l), ΔH = −571.6 kJ. Find ΔH for H₂O(l) → H₂(g) + ½O₂(g).
Solution: Halve the equation: ΔH = −285.8 kJ. Reverse it: ΔH = +285.8 kJ.
Worked example 4.2: How much heat is released when 2.4 g of graphite burns completely to CO₂? (ΔcH = −393.5 kJ mol⁻¹)
Solution: Moles of C = 2.4/12 = 0.20 mol. Heat released = 0.20 × 393.5 = 78.7 kJ.
Worked example 4.3: Find ΔfH° of CH₄(g) from these combustion data: C(graphite) −393.5, H₂(g) −285.8, CH₄(g) −890.3 kJ mol⁻¹ (water formed as liquid).
Solution: Target: C(graphite) + 2H₂(g) → CH₄(g). Keep C + O₂ → CO₂: −393.5. Take 2 × (H₂ + ½O₂ → H₂O): 2 × (−285.8) = −571.6. Reverse CH₄ combustion: CO₂ + 2H₂O → CH₄ + 2O₂: +890.3. Add: ΔfH° = −393.5 − 571.6 + 890.3 = −74.8 kJ mol⁻¹.
Worked example 4.4: ΔcH° of graphite is −393.5 kJ mol⁻¹ and of diamond is −395.4 kJ mol⁻¹. Find ΔH for C(graphite) → C(diamond).
Solution: Keep the graphite equation; reverse the diamond equation. ΔH = −393.5 + 395.4 = +1.9 kJ mol⁻¹. Diamond has slightly higher enthalpy, so graphite is the reference form.
Worked example 4.5: Near 273 K, ΔfusH of ice is 6.01 kJ mol⁻¹ and ΔvapH of water is 45.05 kJ mol⁻¹. Find ΔsubH of ice.
Solution: ΔsubH = 6.01 + 45.05 = 51.06 kJ mol⁻¹. Both values must be at the same temperature. Note that ΔvapH at 273 K is larger than the 40.7 kJ mol⁻¹ value at 373 K.
Worked example 4.6: Given ΔcH° values: C₂H₄(g) −1411, C₂H₆(g) −1560, H₂(g) −285.8 kJ mol⁻¹. Find ΔH for C₂H₄(g) + H₂(g) → C₂H₆(g).
Solution: Burn the reactants and “unburn” the product. ΔH = ΔcH(C₂H₄) + ΔcH(H₂) − ΔcH(C₂H₆) = −1411 − 285.8 + 1560 = −136.8 kJ mol⁻¹.
Worked example 4.7: ΔcH° of acetylene, C₂H₂(g), is −1300 kJ mol⁻¹. Using C −393.5 and H₂ −285.8 kJ mol⁻¹, find ΔfH° of C₂H₂.
Solution: Target: 2C(graphite) + H₂(g) → C₂H₂(g). ΔfH° = 2(−393.5) + (−285.8) − (−1300) = −787 − 285.8 + 1300 = +227.2 kJ mol⁻¹. Acetylene is an endothermic compound. This stored energy is one reason its flame is so hot.
Worked example 4.8 (NEET-hard): Given (i) S(s) + O₂(g) → SO₂(g), ΔH = −297 kJ (ii) 2SO₂(g) + O₂(g) → 2SO₃(g), ΔH = −198 kJ Find ΔH for 2S(s) + 3O₂(g) → 2SO₃(g).
Solution: Take 2 × (i): 2S + 2O₂ → 2SO₂, ΔH = −594 kJ. Add (ii): 2SO₂ cancels. Total: 2S + 3O₂ → 2SO₃, ΔH = −594 − 198 = −792 kJ. Per mole of SO₃ this is −396 kJ.
Quick revision
ΔrH = ΣH(products) − ΣH(reactants); negative is exothermic, positive is endothermic.
Standard state: pure substance, 1 bar, most stable form; data usually at 298 K.
Reverse an equation: change the sign of ΔH. Multiply it: multiply ΔH.
Hess's law follows because H is a state function.
Around any closed cycle, the enthalpy changes add up to zero.
ΔsubH = ΔfusH + ΔvapH at the same temperature.
Freezing, condensation and deposition are exothermic.
NEET traps
Forgetting to multiply ΔH when you multiply an equation by 2 or ½.
Ignoring physical states: H₂O(l) and H₂O(g) give different ΔH values.
Reversing an equation but keeping the sign of ΔH.
Calling carbon’s standard state diamond. It is graphite.
Adding ΔfusH and ΔvapH measured at different temperatures to get ΔsubH.
Using “heat released” as a positive ΔH. Released heat means ΔH is negative.
Practice MCQs: Chapter 4
Level 1: Concept check
1. Hess's law follows from the fact that (a) the law of mass action holds (b) enthalpy is a path function (c) enthalpy is a state function (d) Le Chatelier's principle holds
2. For A → B, ΔH = x. For B → A, ΔH is (a) x (b) −x (c) 2x (d) 1/x
3. The standard state pressure used in thermochemistry is (a) 1 bar (b) 1 Pa (c) 10 bar (d) 760 bar
4. A reaction is exothermic when (a) ΔH > 0 (b) ΔH = 0 (c) ΔH < 0 (d) ΔU > 0 always
5. In the enthalpy level diagram of an endothermic reaction, products lie (a) below the reactants (b) above the reactants (c) at the same level (d) anywhere
6. When a thermochemical equation is multiplied by 2, ΔH is (a) unchanged (b) halved (c) squared (d) doubled
7. At a given temperature, the enthalpy of sublimation equals (a) ΔfusH + ΔvapH (b) ΔvapH − ΔfusH (c) ΔfusH − ΔvapH (d) ΔfusH × ΔvapH
8. Physical states are written in a thermochemical equation because (a) it is a tradition (b) it balances atoms (c) ΔH depends on the physical states (d) they matter only for rates
9. The enthalpy of fusion of ice is (a) negative (b) positive (c) zero (d) undefined
10. Freezing of water at 0 °C is (a) endothermic (b) neither exo- nor endothermic (c) adiabatic (d) exothermic
Level 2: NEET standard
11. Given: C(graphite) + O₂(g) → CO₂(g), ΔH = −393.5 kJ; CO(g) + ½O₂(g) → CO₂(g), ΔH = −283.0 kJ. ΔH for C(graphite) + ½O₂(g) → CO(g) is (a) −676.5 kJ (b) +110.5 kJ (c) −110.5 kJ (d) −283.0 kJ
12. Given 2H₂(g) + O₂(g) → 2H₂O(l), ΔH = −571.6 kJ. ΔH for H₂O(l) → H₂(g) + ½O₂(g) is (a) +285.8 kJ (b) −285.8 kJ (c) +571.6 kJ (d) −571.6 kJ
13. Heat released when 6.0 g of graphite burns to CO₂ (ΔcH = −393.5 kJ mol⁻¹) is (a) 393.5 kJ (b) 98.4 kJ (c) 787 kJ (d) 196.8 kJ
14. ΔcH° values (kJ mol⁻¹): C₂H₆(g) −1560, C(graphite) −393.5, H₂(g) −285.8. ΔfH° of C₂H₆ is (a) +84.4 kJ mol⁻¹ (b) −84.4 kJ mol⁻¹ (c) −1036.4 kJ mol⁻¹ (d) −880.7 kJ mol⁻¹
15. ΔcH° of graphite = −393.5 and of diamond = −395.4 kJ mol⁻¹. ΔH for C(graphite) → C(diamond) is (a) −1.9 kJ mol⁻¹ (b) +788.9 kJ mol⁻¹ (c) +1.9 kJ mol⁻¹ (d) −788.9 kJ mol⁻¹
16. At one temperature, ΔfusH = 6.0 and ΔvapH = 45.0 kJ mol⁻¹ for a substance. Its ΔsubH is (a) 39.0 kJ mol⁻¹ (b) 51.0 kJ mol⁻¹ (c) 270 kJ mol⁻¹ (d) 45.0 kJ mol⁻¹
17. Heat needed to vaporise 9.0 g of water at 373 K (ΔvapH = 40.7 kJ mol⁻¹) is about (a) 40.7 kJ (b) 81.4 kJ (c) 20.4 kJ (d) 10.2 kJ
18. For A → B, ΔH = +20 kJ; for B → C, ΔH = −50 kJ. For A → C, ΔH is (a) −30 kJ (b) +70 kJ (c) −70 kJ (d) +30 kJ
19. Given: S(s) + O₂(g) → SO₂(g), ΔH = −297 kJ; 2SO₂(g) + O₂(g) → 2SO₃(g), ΔH = −198 kJ. ΔH for S(s) + (3/2)O₂(g) → SO₃(g) is (a) −495 kJ (b) −198 kJ (c) −99 kJ (d) −396 kJ
20. In an exothermic reaction (a) H(products) > H(reactants) (b) H(products) < H(reactants) (c) H(products) = H(reactants) (d) heat is absorbed
21. Given: N₂(g) + 2O₂(g) → 2NO₂(g), ΔH = +66.4 kJ; N₂(g) + 2O₂(g) → N₂O₄(g), ΔH = +9.2 kJ. ΔH for N₂O₄(g) → 2NO₂(g) is (a) +75.6 kJ (b) −57.2 kJ (c) +57.2 kJ (d) +24.0 kJ
22. ΔfusH of ice is 6.01 kJ mol⁻¹. ΔH when 36 g of water freezes at 0 °C is (a) −12.0 kJ (b) −6.01 kJ (c) +12.0 kJ (d) +6.01 kJ
Level 3: Challenge
23. ΔcH° values (kJ mol⁻¹): propene C₃H₆(g) −2058, propane C₃H₈(g) −2220, H₂(g) −285.8. ΔH for C₃H₆(g) + H₂(g) → C₃H₈(g) is (a) +123.8 kJ (b) −447.8 kJ (c) −162.0 kJ (d) −123.8 kJ
24. ΔcH° of benzene, C₆H₆(l), is −3268 kJ mol⁻¹. With C −393.5 and H₂ −285.8 kJ mol⁻¹, ΔfH° of benzene is (a) +49.6 kJ mol⁻¹ (b) −49.6 kJ mol⁻¹ (c) +3218 kJ mol⁻¹ (d) −6486 kJ mol⁻¹
25. Given: 2Fe(s) + (3/2)O₂(g) → Fe₂O₃(s), ΔH = −824 kJ; 3Fe(s) + 2O₂(g) → Fe₃O₄(s), ΔH = −1118 kJ. ΔH for 3Fe₂O₃(s) → 2Fe₃O₄(s) + ½O₂(g) is (a) −236 kJ (b) +236 kJ (c) +294 kJ (d) −294 kJ
26. Given: Ca(s) + ½O₂(g) → CaO(s), ΔH = −635 kJ; CaO(s) + H₂O(l) → Ca(OH)₂(s), ΔH = −65 kJ; Ca(s) + O₂(g) + H₂(g) → Ca(OH)₂(s), ΔH = −986 kJ. ΔfH of H₂O(l) is (a) −386 kJ mol⁻¹ (b) +286 kJ mol⁻¹ (c) −286 kJ mol⁻¹ (d) −186 kJ mol⁻¹
27. ΔfH° of H₂O(l) is −285.8 kJ mol⁻¹, and ΔH for H₂O(l) → H₂O(g) at 298 K is +44.0 kJ mol⁻¹. ΔfH° of H₂O(g) is (a) −329.8 kJ mol⁻¹ (b) −241.8 kJ mol⁻¹ (c) +241.8 kJ mol⁻¹ (d) −285.8 kJ mol⁻¹
28. In a cycle A → B (ΔH₁), B → C (ΔH₂), C → A (ΔH₃), which relation is correct? (a) ΔH₁ = ΔH₂ + ΔH₃ (b) ΔH₁ + ΔH₂ = ΔH₃ (c) ΔH₁ × ΔH₂ × ΔH₃ = 1 (d) ΔH₁ + ΔH₂ + ΔH₃ = 0
29. Assertion (A): The enthalpy of formation of CO is found indirectly, using Hess's law. Reason (R): Burning carbon in limited oxygen gives a mixture of CO and CO₂, so the heat for CO alone cannot be measured directly. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: At a given temperature, ΔsubH = ΔfusH + ΔvapH. Statement II: ΔvapH of water is the same at 298 K and at 373 K. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Route-independence of a state function. |
| 2 | b | Reversing changes the sign. |
| 3 | a | IUPAC standard pressure is 1 bar. |
| 4 | c | Heat is released. |
| 5 | b | Products have more enthalpy. |
| 6 | d | ΔH scales with amount. |
| 7 | a | Hess's law over solid → liquid → gas. |
| 8 | c | Phase changes carry enthalpy. |
| 9 | b | Melting absorbs heat. |
| 10 | d | Reverse of melting releases heat. |
| 11 | c | −393.5 + 283.0. |
| 12 | a | Halve and reverse. |
| 13 | d | 0.5 mol × 393.5 kJ. |
| 14 | b | −787 − 857.4 + 1560 = −84.4. |
| 15 | c | −393.5 + 395.4. |
| 16 | b | 6.0 + 45.0. |
| 17 | c | 0.5 mol × 40.7 kJ. |
| 18 | a | 20 + (−50). |
| 19 | d | −297 + ½(−198). |
| 20 | b | Excess enthalpy leaves as heat. |
| 21 | c | 66.4 − 9.2. |
| 22 | a | 2 mol × (−6.01) kJ. |
| 23 | d | −2058 − 285.8 + 2220. |
| 24 | a | −2361 − 857.4 + 3268 = +49.6. |
| 25 | b | 3(+824) + 2(−1118) = +236. |
| 26 | c | −635 + x − 65 = −986 gives x = −286. |
| 27 | b | −285.8 + 44.0. |
| 28 | d | Closed cycle sums to zero. |
| 29 | a | R is the reason for the indirect route. |
| 30 | c | ΔvapH changes with temperature. |
Chapter 4 revision sheet
One-page summary
A thermochemical equation is a balanced equation with physical states and ΔrH, for example C(graphite) + O₂(g) → CO₂(g); ΔrH° = −393.5 kJ mol⁻¹.
ΔrH < 0: exothermic (products lower in enthalpy). ΔrH > 0: endothermic.
Reverse the equation: change the sign of ΔH. Multiply the equation by n: multiply ΔH by n. Fractional coefficients are allowed.
Physical states matter: forming H₂O(l) releases more heat than forming H₂O(g).
Standard state: pure substance at 1 bar and the stated temperature (data usually at 298 K).
ΔfH° = enthalpy change when 1 mol of a compound forms from its elements in their reference states.
ΔfH° of an element in its reference state is zero (C graphite, O₂ gas, Br₂ liquid). Diamond and O₃ are not zero.
ΔrH° = ΣΔfH°(products) − ΣΔfH°(reactants), each multiplied by its coefficient.
Hess's law: ΔH for a reaction is the same whether it happens in one step or many, because H is a state function.
Use Hess's law to get ΔH of reactions that are hard to measure, such as C → CO or graphite → diamond.
Bomb calorimeter (constant V) gives ΔU; coffee-cup calorimeter (constant p) gives ΔH. Heat = C_cal × ΔT or mcΔT.
Must-remember table
| Substance | ΔfH° at 298 K (kJ mol⁻¹) |
|---|---|
| CO₂(g) | −393.5 |
| CO(g) | −110.5 |
| H₂O(l) | −285.8 |
| H₂O(g) | −241.8 |
| CH₄(g) | −74.8 |
| NH₃(g) | −46.1 |
| C(diamond) | +1.9 |
| C(graphite), O₂(g), H₂(g), N₂(g), Br₂(l) | 0 |
Memory aids
"PRo minus Re": ΔrH = PROducts minus REactants for ΔfH data.
"Flip-Flip, Times-Times": flip the equation, flip the sign; multiply the equation, multiply ΔH.
"Hess = Highway Equals Side-road": the enthalpy drop is the same by the highway (one step) or the side roads (many steps).
"GOBN at zero": Graphite, O₂, Br₂(l), N₂ (elements in reference state) have ΔfH° = 0.
Concept connections
Balancing and mole ratios in thermochemical equations come from Chemistry Book 1: Some Basic Concepts in Chemistry.
Combustion enthalpies of alkanes and stability of isomers appear in Chemistry Book 15: Hydrocarbons.
Heat released in cells and redox reactions links to Chemistry Book 7: Redox Reactions and Electrochemistry.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. Match List I (operation on a thermochemical equation for a combustion) with List II (effect on ΔH).
List I: A. Reverse the equation; B. Multiply the equation by 2; C. Add two equations; D. Write H₂O(g) instead of H₂O(l) as product
List II: (i) The ΔH values add; (ii) ΔH becomes less negative; (iii) Sign changes, size stays the same; (iv) ΔH doubles
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-ii, B-iv, C-i, D-iii (d) A-iii, B-iv, C-i, D-ii
32. Use ΔfH° (kJ mol⁻¹): CO₂ −393.5, CO −110.5, H₂O(l) −285.8, CH₄ −74.8, NH₃ −46.1. Match List I with List II (ΔrH° in kJ).
List I: A. C(graphite) + ½O₂(g) → CO(g); B. CO(g) + ½O₂(g) → CO₂(g); C. CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l); D. ½N₂(g) + 3/2H₂(g) → NH₃(g)
List II: (i) −283.0; (ii) −46.1; (iii) −110.5; (iv) −890.3
(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii
33. Match List I with List II.
List I: A. Exothermic reaction; B. Endothermic reaction; C. Standard-state pressure; D. ΔfH° of an element in its reference state
List II: (i) Zero; (ii) ΔH > 0; (iii) ΔH < 0; (iv) 1 bar
(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-i, D-iv (c) A-iii, B-ii, C-iv, D-i (d) A-iv, B-ii, C-iii, D-i
34. Match List I with List II.
List I: A. Bomb calorimeter; B. Coffee-cup calorimeter; C. Unit of calorimeter heat capacity; D. Heat released in a bomb calorimeter
List II: (i) Gives qᵥ = ΔU; (ii) Gives qₚ = ΔH; (iii) kJ K⁻¹; (iv) C_cal × ΔT
(a) A-i, B-ii, C-iii, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-i, B-ii, C-iv, D-iii (d) A-ii, B-i, C-iv, D-iii
35. How many of the following have ΔfH° = 0 at 298 K?
A. O₃(g)
B. C(graphite)
C. C(diamond)
D. Br₂(l)
E. H⁺(aq), by convention
(a) 2 (b) 4 (c) 3 (d) 5
36. Choose the correct set of statements about Hess's law.
A. ΔH of a reaction does not depend on the number of steps.
B. It follows from enthalpy being a state function.
C. It gives ΔH for C(graphite) → CO(g), which is hard to measure directly.
D. Thermochemical equations can be added and subtracted like algebraic equations.
(a) A and B only (b) A, B, C and D (c) A, B and C only (d) B and D only
37. Choose the correct set of statements.
A. ΔrH° = ΣΔfH°(products) − ΣΔfH°(reactants).
B. For gas-phase reactions, ΔrH ≈ Σ(bond enthalpies of reactants) − Σ(bond enthalpies of products).
C. In an exothermic reaction, the products have higher enthalpy than the reactants.
D. ΔH of a reaction depends on the physical states of reactants and products.
(a) A and B only (b) B, C and D only (c) A, C and D only (d) A, B and D only
38. How many of the following statements are correct?
A. Standard-state pressure is 1 bar.
B. A standard state can only be defined at 298 K.
C. ΔH° of a reverse reaction is equal in size and opposite in sign.
D. Fractional coefficients are allowed in thermochemical equations.
(a) 3 (b) 2 (c) 4 (d) 1
39. A table gives ΔfH° (kJ mol⁻¹): CO₂(g) −393.5; H₂O(l) −285.8; C₃H₈(g) −103.8. The standard enthalpy of combustion of propane is
(a) −575.5 kJ mol⁻¹ (b) −2427.5 kJ mol⁻¹ (c) −2219.9 kJ mol⁻¹ (d) +2219.9 kJ mol⁻¹
40. An enthalpy level diagram shows three levels: A at 0 kJ, B at +50 kJ and C at −30 kJ (all for the amounts in the equations). ΔH for C → B is
(a) +80 kJ (b) −80 kJ (c) +20 kJ (d) −20 kJ
41. In a coffee-cup calorimeter, 50 mL of 1.0 M HCl and 50 mL of 1.0 M NaOH, both at 25.0 °C, are mixed. A temperature–time graph shows the mixture rising to a steady maximum of 31.7 °C. Taking the solution as 100 g with c = 4.18 J g⁻¹ K⁻¹, the enthalpy of neutralisation is about
(a) −2.80 kJ mol⁻¹ (b) −28.0 kJ mol⁻¹ (c) +56.0 kJ mol⁻¹ (d) −56.0 kJ mol⁻¹
Case for Q42–43. Graphite and diamond both burn to CO₂(g). Their standard enthalpies of combustion are −393.5 kJ mol⁻¹ (graphite) and −395.4 kJ mol⁻¹ (diamond). A jeweller wants to know which form is lower in enthalpy.
42. ΔH° for C(graphite) → C(diamond) is
(a) −1.9 kJ mol⁻¹ (b) +1.9 kJ mol⁻¹ (c) +788.9 kJ mol⁻¹ (d) −788.9 kJ mol⁻¹
43. The heat released when 6.0 g of diamond burns completely is
(a) 395.4 kJ (b) 196.8 kJ (c) 197.7 kJ (d) 98.9 kJ
44. Given (kJ mol⁻¹): C(graphite) + O₂(g) → CO₂(g), −393.5; H₂(g) + ½O₂(g) → H₂O(l), −285.8; C₂H₂(g) + 5/2O₂(g) → 2CO₂(g) + H₂O(l), −1299.6. ΔfH° of C₂H₂(g) is
(a) +226.8 kJ mol⁻¹ (b) −226.8 kJ mol⁻¹ (c) −2372.4 kJ mol⁻¹ (d) +620.3 kJ mol⁻¹
45. In a bomb calorimeter, ΔcU of methanol, CH₃OH(l), is −725.0 kJ mol⁻¹ at 298 K (product water is liquid). Taking RT = 2.478 kJ mol⁻¹, ΔcH is
(a) −723.8 kJ mol⁻¹ (b) −725.0 kJ mol⁻¹ (c) −726.2 kJ mol⁻¹ (d) −728.7 kJ mol⁻¹
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Reverse: sign flips; ×2: ΔH doubles; adding equations adds ΔH; less heat is released when water stays as vapour. |
| 32 | b | A = ΔfH(CO); B = −393.5 + 110.5 = −283.0; C = −393.5 − 571.6 + 74.8 = −890.3; D = ΔfH(NH₃). |
| 33 | c | Definitions from this chapter. |
| 34 | a | Bomb = constant V; coffee cup = constant p; heat = C_calΔT. |
| 35 | c | B, D and E are zero. O₃ and diamond are not reference forms. |
| 36 | b | All four statements are correct. |
| 37 | d | Exothermic means products are lower in enthalpy, so C is wrong. |
| 38 | a | A, C, D correct. Standard state can be defined at any temperature; 298 K is only common. |
| 39 | c | C₃H₈ + 5O₂ → 3CO₂ + 4H₂O(l): 3(−393.5) + 4(−285.8) − (−103.8) = −2219.9 kJ. |
| 40 | a | ΔH = H(B) − H(C) = 50 − (−30) = +80 kJ. |
| 41 | d | q = 100 × 4.18 × 6.7 = 2800.6 J for 0.050 mol water formed; ΔH = −2.80/0.050 = −56.0 kJ mol⁻¹. |
| 42 | b | Graphite → CO₂ then CO₂ → diamond: −393.5 + 395.4 = +1.9 kJ mol⁻¹; graphite is lower in enthalpy. |
| 43 | c | 6.0 g = 0.50 mol; 0.50 × 395.4 = 197.7 kJ. 196.8 kJ is the graphite value. |
| 44 | a | 2(−393.5) + (−285.8) − (−1299.6) = +226.8 kJ mol⁻¹. |
| 45 | c | CH₃OH(l) + 3/2O₂(g) → CO₂(g) + 2H₂O(l): Δn₍g₎ = 1 − 1.5 = −0.5. ΔH = −725.0 − 0.5 × 2.478 = −726.2 kJ mol⁻¹. |