Chapter 3 of 11 · 23 min read

Chapter 1: Basic Terms of Thermodynamics

What you will learn

  • What a system, its surroundings and the boundary are.

  • How open, closed and isolated systems differ.

  • How to tell extensive properties from intensive ones.

  • Why some quantities are state functions and others are path functions.

  • The common types of processes: isothermal, adiabatic, isobaric, isochoric, cyclic, reversible and irreversible.

1.1 What thermodynamics studies

Thermodynamics studies energy changes that go with physical and chemical changes. It works with bulk matter, such as a beaker of solution or a cylinder of gas. It does not need any picture of atoms.

It answers two questions. How much energy is exchanged? Will the change happen on its own? It does not say how fast the change is. Rate belongs to chemical kinetics.

1.2 System, surroundings and boundary

The system is the part of the universe we choose to study. Everything else that can exchange energy or matter with it is the surroundings.

Universe=System+Surroundings\text{Universe} = \text{System} + \text{Surroundings}

The boundary separates the two. It may be real, like the walls of a beaker, or imaginary, like a line drawn around a gas sample. A boundary can be rigid or movable, and it may or may not let heat through.

Think of chai boiling in a pan. If the chai is the system, then the pan, the stove, the air and the cook form the surroundings.

1.3 Types of systems

Systems are sorted by what can cross the boundary.

TypeMatter exchangeEnergy exchangeEveryday example
OpenYesYesMilk boiling in an open pan
ClosedNoYesSealed pressure cooker before the whistle
IsolatedNoNoHot coffee in an ideal vacuum flask

A truly isolated system is an ideal. A good vacuum flask comes close for a few hours. The universe as a whole is treated as an isolated system.

Figure 1.1 · Open, closed and isolated systems
Figure 1.1 · Open, closed and isolated systems

Read left to right: each wall blocks one more kind of exchange, first matter and then energy.

1.4 State of a system and state variables

The state of a system is its exact condition, described by measurable properties such as pressure p, volume V, temperature T and amount n. These are called state variables.

We do not need all of them. For a fixed amount of an ideal gas, pV = nRT links them. Once any two of p, V and T are fixed, the third follows. Such a link is called an equation of state.

1.5 Extensive and intensive properties

An extensive property depends on how much matter is present. An intensive property does not.

A simple test: cut the system into two equal halves. If a property halves, it is extensive. If it stays the same, it is intensive.

ExtensiveIntensive
Mass, volume, amount (n)Temperature, pressure, density
Internal energy U, enthalpy HMolar volume, molar enthalpy
Entropy S, Gibbs energy GMolar entropy, molar Gibbs energy
Heat capacity CSpecific heat, molar heat capacity
Number of particlesMolarity, refractive index, viscosity, surface tension, emf of a cell

The ratio of two extensive properties is intensive. Density is mass divided by volume. Molar heat capacity is heat capacity divided by moles. Molar volume is volume divided by moles.

density=mV,Cm=Cn,Vm=Vn\text{density} = \frac{m}{V}, \qquad C_m = \frac{C}{n}, \qquad V_m = \frac{V}{n}

The sum or product of extensive properties stays extensive.

1.6 State functions and path functions

A state function depends only on the present state of the system. It does not care how the system got there. Examples are p, V, T, U, H, S and G.

The change in a state function X is final value minus initial value.

ΔX=Xfinal−Xinitial\Delta X = X_{\text{final}} - X_{\text{initial}}

For a cyclic process the system returns to its starting state, so every state function change is zero.

∮dX=0\oint dX = 0

A path function depends on the route taken. Heat q and work w are path functions. A useful picture: you climb from the ground floor to the fifth floor of a building. Your change in height is the same by stairs or by lift. The calories you burn are not.

We will see in Chapter 2 that q and w each depend on the path, but their sum q + w equals ΔU and does not.

1.7 Types of processes

A process is the change of a system from one state to another. The common types are named by what is held fixed.

ProcessWhat stays constantConditionExample
IsothermalTemperaturedT = 0Ice melting at 0 °C
AdiabaticNo heat crosses boundaryq = 0Air rushing out of a burst tyre
IsobaricPressuredp = 0Reaction in an open beaker
IsochoricVolumedV = 0Heating gas in a sealed steel cylinder
CyclicReturns to startΔ(state function) = 0Refrigerant in a fridge

An adiabatic process needs either a perfectly insulated wall or a change so fast that heat has no time to flow.

For an ideal gas, internal energy depends only on temperature. So in an isothermal change of an ideal gas, ΔU = 0.

Reversible and irreversible processes. In a reversible process the driving force is only infinitesimally larger than the opposing force. The system stays almost at equilibrium at every step. An infinitesimal change in conditions can reverse it. Such a process takes infinite time. It is an ideal limit.

All real processes, like gas rushing out of a balloon or a ball rolling down a slope, are irreversible. They happen in finite time and the system is not at equilibrium in between.

FeatureReversibleIrreversible
Driving forceInfinitesimally larger than opposing forceFinite difference
Time takenInfiniteFinite
Equilibrium during changeAt every stepOnly at start and end
Can be reversed by tiny change?YesNo
Real or ideal?IdealReal

1.8 Thermodynamic equilibrium

A system is in thermodynamic equilibrium when its properties do not change with time. This needs three kinds of equilibrium together.

  • Thermal: same temperature throughout, so no heat flow.

  • Mechanical: no unbalanced force, so pressure is uniform.

  • Chemical: composition does not change with time.

Worked examples

Worked example 1.1: Classify each as open, closed or isolated: (i) dal cooking in an open vessel, (ii) a sealed glass ampoule of medicine, (iii) cold water in an ideal vacuum flask.

Solution: (i) Steam escapes and heat enters, so it is open. (ii) Glass lets heat through but no matter, so it is closed. (iii) Nothing crosses an ideal flask wall, so it is isolated.

Worked example 1.2: From this list pick the intensive properties: mass, molar volume, temperature, internal energy, molarity, heat capacity, specific heat, refractive index.

Solution: Halve the sample in your mind. Molar volume, temperature, molarity, specific heat and refractive index stay the same, so they are intensive. Mass, internal energy and heat capacity halve, so they are extensive.

Worked example 1.3: Two identical 500 mL bottles of water, each at 30 °C, are emptied into one jug. What are the final volume and temperature?

Solution: Volume is extensive, so it adds: 500 + 500 = 1000 mL. Temperature is intensive, so it stays 30 °C. Adding temperatures to get 60 °C is a common mistake.

Worked example 1.4: 2 mol of an ideal gas at 1 atm and 300 K is split into two equal parts. Find the volume, temperature and pressure of each part. Take R = 0.0821 L atm K⁻¹ mol⁻¹.

Solution: Whole sample: V = nRT/p = 2 × 0.0821 × 300 / 1 = 49.3 L. Each half has 1 mol, so V = 24.6 L. Temperature and pressure are intensive: each half stays at 300 K and 1 atm.

Worked example 1.5: Name the process in each case: (i) water boiling at 100 °C in an open pan, (ii) air in a bicycle pump compressed very quickly, (iii) gas heated in a rigid sealed steel cylinder.

Solution: (i) Temperature and pressure both stay constant: isothermal and isobaric. (ii) Too fast for heat to flow: nearly adiabatic. (iii) Volume cannot change: isochoric.

Worked example 1.6: A gas is taken from state A (1 bar, 300 K) to state B (2 bar, 450 K) by two different routes. On route I it absorbs 900 J of heat. On route II it absorbs 1400 J. What is the change in temperature on each route? Is heat a state function?

Solution: Temperature is a state function, so ΔT = 450 − 300 = 150 K on both routes. The heat absorbed differs between routes, so heat is a path function.

Worked example 1.7: A gas sample is taken through a cycle A → B → C → A. Which of these must be zero for the whole cycle: Δp, ΔU, total heat absorbed, ΔH, total work?

Solution: The gas ends where it began. So the state functions p, U and H return to their start values: Δp = ΔU = ΔH = 0. Total heat and total work depend on the path. They need not be zero; only their sum is zero.

Worked example 1.8: X and Y are both extensive. Which of X + Y, X × Y and X/Y is intensive?

Solution: Double the system. X + Y doubles, X × Y becomes four times, and X/Y stays the same. So only X/Y is intensive.

Quick revision

  • Universe = system + surroundings; the boundary may be real or imaginary.

  • Open: matter and energy cross. Closed: only energy. Isolated: neither.

  • Extensive properties depend on amount; intensive ones do not. A ratio of two extensive properties is intensive.

  • State functions (p, V, T, U, H, S, G) depend only on the state; q and w depend on the path.

  • For any cyclic process, the change in every state function is zero.

  • Isothermal: T fixed. Adiabatic: q = 0. Isobaric: p fixed. Isochoric: V fixed.

  • A reversible process is an ideal, infinitely slow change that stays at equilibrium at every step.

NEET traps

  • Calling heat capacity intensive. Heat capacity is extensive; specific heat and molar heat capacity are intensive.

  • Adding temperatures when two samples are mixed. Temperature is intensive.

  • Thinking adiabatic means isothermal. In an adiabatic change q = 0, but T usually changes.

  • Writing that a cyclic process has q = 0. Only state function changes are zero; q and w need not be.

  • Treating a sealed but uninsulated container as isolated. Heat still crosses its wall, so it is closed.

  • Assuming ΔU = 0 in every isothermal process. That holds for an ideal gas, not for a phase change like melting.

Practice MCQs: Chapter 1

Level 1: Concept check

1. A pressure cooker on a stove, lid sealed and no steam escaping yet, is best described as (a) an open system (b) a closed system (c) an isolated system (d) an adiabatic open system

2. Which of these is an intensive property? (a) Volume (b) Enthalpy (c) Mass (d) Molar heat capacity

3. Which of these is NOT a state function? (a) Internal energy (b) Work (c) Enthalpy (d) Entropy

4. A process that takes place at constant volume is called (a) isobaric (b) isothermal (c) isochoric (d) adiabatic

5. In an adiabatic process (a) q = 0 (b) ΔT = 0 (c) Δp = 0 (d) ΔV = 0

6. Hot coffee in an ideal, perfectly sealed vacuum flask is an example of (a) an open system (b) a closed system (c) an isolated system (d) none of these

7. Which pair contains two extensive properties? (a) Temperature and pressure (b) Density and volume (c) Molarity and mass (d) Volume and heat capacity

8. For a cyclic process, the change in any state function is (a) always positive (b) always negative (c) zero (d) dependent on the path

9. The surroundings of a system are (a) everything outside the system that can exchange energy or matter with it (b) only the walls of the container (c) only the reactants (d) only the gas phase above a liquid

10. A reversible process is one in which (a) the change is very fast (b) no heat is exchanged (c) temperature stays constant (d) the system stays almost at equilibrium at every step

Level 2: NEET standard

11. Which set contains only intensive properties? (a) Temperature, pressure, density, refractive index (b) Mass, volume, temperature (c) Internal energy, enthalpy, temperature (d) Pressure, volume, amount

12. 2 mol of an ideal gas occupies about 49.3 L at 300 K and 1 atm. It is divided into two equal halves. Each half has (a) 49.3 L, 300 K, 0.5 atm (b) 24.6 L, 150 K, 0.5 atm (c) 24.6 L, 150 K, 1 atm (d) 24.6 L, 300 K, 1 atm

13. Which of these is a path function? (a) Pressure (b) Heat absorbed (c) Internal energy (d) Gibbs energy

14. Melting of ice at 0 °C and 1 atm is (a) adiabatic (b) isochoric only (c) isothermal and isobaric (d) cyclic

15. Which of these is extensive? (a) Gibbs energy (b) Specific heat (c) Molar enthalpy (d) emf of a cell

16. A gas sealed in a rigid steel cylinder is heated. The process is (a) isobaric (b) isochoric (c) isothermal (d) adiabatic

17. A human body exchanging food, water, air and heat with its environment is (a) isolated (b) closed (c) adiabatic (d) open

18. Which statement is correct? (a) q and w are both state functions (b) q is a state function but w is not (c) q and w each depend on path, but q + w does not (d) q + w depends on path

19. Thermodynamic equilibrium requires (a) thermal equilibrium only (b) thermal, mechanical and chemical equilibrium together (c) mechanical equilibrium only (d) chemical equilibrium only

20. Which of these is intensive? (a) Amount in moles (b) Heat capacity (c) Volume (d) Molarity

21. When a car tyre bursts, the air rushing out undergoes a change that is nearly (a) adiabatic (b) isothermal (c) isochoric (d) isobaric

22. In an isothermal change of an ideal gas, which quantities stay constant? (a) p only (b) V only (c) T and U (d) q and w

Level 3: Challenge

23. A gas goes from (1 bar, 300 K) to (3 bar, 450 K) by two different routes. Which quantity is the same for both routes? (a) Heat absorbed (b) Work done (c) Change in internal energy (d) Number of steps

24. X and Y are extensive properties. Which combination is intensive? (a) X/Y (b) X + Y (c) X × Y (d) X − Y

25. Which statement is wrong? (a) An isolated system exchanges neither matter nor energy (b) A closed system exchanges energy but not matter (c) The universe is the system plus its surroundings (d) An open system exchanges energy but never matter

26. Two 100 mL samples of the same solution, each at 40 °C, are combined. The combined sample has (a) 200 mL at 80 °C (b) 200 mL at 40 °C (c) 100 mL at 40 °C (d) 200 mL at 20 °C

27. For one complete cycle of a gas, which quantity need NOT be zero? (a) ΔU (b) ΔH (c) ΔT (d) Total work done

28. Which statement is correct? (a) A reversible process is completed quickly (b) Real processes are irreversible; a reversible process is an ideal limit taking infinite time (c) During a reversible change the system is far from equilibrium (d) An irreversible change can be reversed by an infinitesimal change in conditions

29. Assertion (A): Heat capacity is extensive, but molar heat capacity is intensive. Reason (R): Molar heat capacity is heat capacity divided by amount, a ratio of two extensive properties. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: Work is a state function. Statement II: For an isochoric process with only pressure–volume work, the work done is zero. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bHeat crosses the metal wall; no matter escapes.
2dMolar quantity does not depend on amount.
3bWork depends on the path.
4cIsochoric means constant volume.
5aAdiabatic means no heat exchange.
6cNeither matter nor energy crosses an ideal flask.
7dBoth double when the system doubles.
8cSystem returns to its initial state.
9aDefinition of surroundings.
10dReversible changes pass through equilibrium states.
11aNone of these depends on amount.
12dVolume halves; T and p are intensive.
13bHeat depends on route.
14cT and p fixed during melting.
15aG depends on amount.
16bA rigid cylinder keeps V fixed.
17dBoth matter and energy are exchanged.
18cq + w = ΔU, a state function.
19bAll three must hold together.
20dMolarity is moles per litre, a ratio.
21aToo fast for heat to flow.
22cU of an ideal gas depends only on T.
23cU is a state function.
24aRatio of two extensive properties.
25dAn open system exchanges matter too.
26bVolume adds; temperature stays the same.
27dWork is a path function.
28bReversible change is an idealised, infinitely slow limit.
29aR correctly explains why the ratio is intensive.
30dWork is a path function; with ΔV = 0, pV work is zero.

Chapter 1 revision sheet

One-page summary

  • Thermodynamics studies energy changes in bulk matter. It tells us whether a change can happen and how much energy is involved, not how fast.

  • System = the part under study; surroundings = everything else; boundary = the wall, real or imaginary, between them. System + surroundings = universe.

  • Open system: exchanges matter and energy. Closed: energy only. Isolated: neither.

  • The state of a system is fixed by a few state variables such as p, V, T and n.

  • Extensive properties depend on amount (mass, V, U, H, S, G, heat capacity). Intensive ones do not (T, p, density, molar quantities, specific heat).

  • Ratio of two extensive properties is intensive (density = mass/volume).

  • State function: depends only on the present state (U, H, S, G, p, V, T). Its change depends only on initial and final states; over a cycle it is zero.

  • Path function: depends on the route (q, w).

  • Isothermal: ΔT = 0. Isobaric: Δp = 0. Isochoric: ΔV = 0. Adiabatic: q = 0. Cyclic: system returns to its start, so every ΔX = 0.

  • Reversible process: infinitesimal steps, system always close to equilibrium, can be reversed by a tiny change. Real processes are irreversible.

  • Thermodynamic equilibrium = thermal (same T) + mechanical (same p) + chemical (no net change in composition) equilibrium together.

  • Free expansion: gas expands into vacuum, pₑₓ = 0.

Must-remember table

TermCondition or meaningExample
Open systemMatter and energy cross the boundaryTea in an open cup
Closed systemOnly energy crossesSealed pressure cooker
Isolated systemNothing crossesGood thermos flask (approx.)
IsothermalΔT = 0Slow expansion in a water bath
IsobaricΔp = 0Reaction in an open beaker
IsochoricΔV = 0Bomb calorimeter
Adiabaticq = 0Fast compression in a bicycle pump
CyclicΔU = ΔH = 0, every ΔX = 0Gas returned to start state
State functionPath-independentU, H, S, G, T, p, V
Path functionPath-dependentq, w

Memory aids

  • "OCI: Open Chai, Closed Cooker, Isolated Ice-box": Open system = chai in an open cup; Closed = sealed pressure cooker; Isolated = an ideal thermos or ice-box.

  • "TPVQ = Thermal, Pressure, Volume, Q" for the four constant-something processes: isoThermal keeps T, isobaric keeps P, isochoric keeps V, adiabatic keeps Q at zero.

  • "Double test": double the sample. If the property doubles it is extensive; if it stays the same it is intensive.

  • "Heat and work are travellers, not residents": q and w exist only while energy crosses the boundary, so they are path functions; U lives in the system, so it is a state function.

Concept connections

  • Pressure, volume and temperature of gases link to Physics Book 9: Kinetic Theory of Gases and Physics Book 8: Thermodynamics.

  • The idea of chemical equilibrium as a state with no net change continues in Chemistry Book 6: Equilibrium.

  • Molar quantities and the mole concept come from Chemistry Book 1: Some Basic Concepts in Chemistry.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (process) with List II (feature).

  • List I: A. Isochoric process; B. Adiabatic process; C. Isothermal process of an ideal gas; D. Cyclic process

  • List II: (i) Change in every state function is zero; (ii) Expansion work is zero; (iii) pV stays constant; (iv) No heat is exchanged

(a) A-i, B-iv, C-iii, D-ii (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iv, C-iii, D-i (d) A-iv, B-ii, C-i, D-iii

32. Match List I (quantity) with List II (description).

  • List I: A. Temperature; B. Internal energy; C. Heat; D. Density

  • List II: (i) Path function; (ii) Extensive state function; (iii) Intensive property that decides the direction of heat flow; (iv) Intensive property formed as a ratio of two extensive properties

(a) A-iii, B-ii, C-i, D-iv (b) A-iv, B-ii, C-i, D-iii (c) A-iii, B-i, C-ii, D-iv (d) A-ii, B-iii, C-iv, D-i

33. Match List I (situation) with List II (type of system).

  • List I: A. Hot tea in a sealed, well-insulated flask; B. Water boiling in an open pan; C. Air in a balloon warmed by the sun; D. Gas in a sealed steel cylinder heated over a flame

  • List II: (i) Closed, volume can change; (ii) Open; (iii) Isolated (to a good approximation); (iv) Closed, volume fixed

(a) A-ii, B-iii, C-i, D-iv (b) A-iii, B-ii, C-iv, D-i (c) A-i, B-ii, C-iii, D-iv (d) A-iii, B-ii, C-i, D-iv

34. Match List I (term) with List II (meaning).

  • List I: A. Reversible process; B. Thermodynamic equilibrium; C. State variables; D. Free expansion

  • List II: (i) Quantities such as p, V, T and n that fix the state; (ii) Gas expands against zero external pressure; (iii) Change made in infinitesimal steps so the system is always close to equilibrium; (iv) Thermal, mechanical and chemical equilibrium at the same time

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-i, B-iv, C-iii, D-ii

35. How many of the following statements are correct?

  • A. Work is a state function.

  • B. ΔU for a cyclic process is zero.

  • C. Pressure is an intensive property.

  • D. Heat capacity is an intensive property.

  • E. In an adiabatic process, q = 0.

(a) 2 (b) 3 (c) 4 (d) 5

36. Choose the correct set of statements about a reversible process.

  • A. It is carried out infinitely slowly.

  • B. The system is in near-equilibrium at every stage.

  • C. An isothermal reversible expansion gives the maximum work for given initial and final volumes.

  • D. All natural processes are reversible.

(a) A and D only (b) B, C and D only (c) A, B and C only (d) A, B, C and D

37. Choose the correct set of statements.

  • A. Molar enthalpy is an intensive property.

  • B. The ratio of two extensive properties is intensive.

  • C. Volume is an intensive property.

  • D. Mixing 1 L of water at 300 K with another 1 L of water at 300 K gives water at 300 K.

(a) A and B only (b) B, C and D only (c) A, C and D only (d) A, B and D only

38. How many of the following statements about an isolated system are correct?

  • A. It exchanges neither matter nor energy with the surroundings.

  • B. The universe can be treated as an isolated system.

  • C. The internal energy of an isolated system stays constant.

  • D. The entropy of an isolated system can decrease on its own.

(a) 3 (b) 2 (c) 4 (d) 1

39. For a fixed amount of an ideal gas, a graph of pressure (y-axis) against kelvin temperature (x-axis) is a straight line passing through the origin. The process is

(a) isothermal (b) isochoric (c) isobaric (d) adiabatic

40. A table lists five properties of a water sample: mass 2.0 kg; volume 2.0 L; temperature 300 K; density 1.0 kg L⁻¹; molar heat capacity 75.3 J K⁻¹ mol⁻¹. The sample is split into two equal halves. Which entries stay the same for each half?

(a) Only temperature (b) Mass and volume (c) Temperature, density and molar heat capacity (d) All five

41. A system goes from state A to state B by two paths. Path 1: q = +40 J, w = −10 J. Path 2: q = +25 J. The work w for path 2 (IUPAC convention) is

(a) −5 J (b) −15 J (c) +15 J (d) +5 J

Case for Q42–43. A sealed, rigid steel can holds 1.0 L of air at 1.00 bar and 300 K. It is dropped into a pan of boiling water at 373 K and left until the air inside also reaches 373 K. Treat the air as an ideal gas.

42. The air in the can is best described as

(a) a closed system in an isochoric process (b) an open system in an isobaric process (c) an isolated system in an adiabatic process (d) a closed system in an isothermal process

43. The final pressure of the air is about

(a) 0.80 bar (b) 1.00 bar (c) 1.24 bar (d) 3.73 bar

44. How many of the following are independent of the path taken between two given states of a system? (Only pV work is possible.)

  • A. q + w

  • B. q at constant volume

  • C. q at constant pressure

  • D. w for an adiabatic change

  • E. q for an isothermal change of an ideal gas

(a) 3 (b) 4 (c) 5 (d) 2

45. 2.0 mol of an ideal gas at 1.0 bar occupies 49.6 L. Its molar volume and its temperature are about (R = 0.08314 L bar K⁻¹ mol⁻¹)

(a) 24.8 L mol⁻¹ and 298 K (b) 49.6 L mol⁻¹ and 597 K (c) 24.8 L mol⁻¹ and 273 K (d) 12.4 L mol⁻¹ and 149 K

Level 4 answer key

QAnsReason
31cIsochoric: no ΔV so no pV work; adiabatic: q = 0; isothermal ideal gas: pV = nRT constant; cyclic: all ΔX = 0.
32aT decides heat flow; U is extensive and a state function; heat is a path function; density = mass/volume.
33dInsulated sealed flask ≈ isolated; open pan loses steam (open); balloon stretches (closed, V changes); steel cylinder is rigid.
34bDefinitions as given in sections 1.4, 1.7 and 1.8.
35bB, C, E are correct. Work is a path function and heat capacity is extensive.
36cReal (natural) processes are irreversible, so D is wrong.
37dVolume doubles with amount, so it is extensive; C is wrong.
38aA, B, C correct. Entropy of an isolated system never decreases on its own.
39bp = (nR/V)T is a straight line through the origin only when V is constant.
40cIntensive entries (T, density, molar heat capacity) do not change; mass and volume halve.
41dΔU = 40 − 10 = 30 J for both paths; w₂ = 30 − 25 = +5 J.
42aNo matter crosses (closed); the rigid can keeps V fixed (isochoric); T changes, so not isothermal.
43cAt constant V, p₂ = p₁T₂/T₁ = 1.00 × 373/300 = 1.24 bar.
44bq + w = ΔU, q_V = ΔU, q_p = ΔH, w_adiabatic = ΔU are fixed; isothermal q depends on reversible vs irreversible path.
45aV_m = 49.6/2.0 = 24.8 L mol⁻¹; T = pV_m/R = 24.8/0.08314 = 298 K.
23 min left
‹
›