Unit Test: Chemical Kinetics
45 questions, 50 minutes. Marking: +4 for a correct answer, −1 for a wrong one, 0 if left blank. Use log 2 = 0.3010, log 3 = 0.4771 and R = 8.314 J K⁻¹ mol⁻¹.
1. For 2SO₂ + O₂ → 2SO₃, SO₃ forms at 2.4 × 10⁻⁴ M s⁻¹. O₂ is used at (a) 2.4 × 10⁻⁴ M s⁻¹ (b) 4.8 × 10⁻⁴ M s⁻¹ (c) 1.2 × 10⁻⁴ M s⁻¹ (d) 6.0 × 10⁻⁵ M s⁻¹
2. The unit of k for a reaction of order 5/2 (concentration in mol L⁻¹, time in s) is (a) L^(3/2) mol^(−3/2) s⁻¹ (b) mol^(3/2) L^(−3/2) s⁻¹ (c) L mol⁻¹ s⁻¹ (d) L² mol⁻² s⁻¹
3. A first-order reaction has t½ = 69.3 s. Its rate constant is (a) 0.1 s⁻¹ (b) 0.01 s⁻¹ (c) 1.0 s⁻¹ (d) 0.001 s⁻¹
4. A zero-order reaction has [A]₀ = 0.60 M and k = 0.015 M min⁻¹. Its half-life is (a) 46.2 min (b) 40 min (c) 20 min (d) 10 min
5. Rate = k[A]²[B]⁰. If [B] is tripled and [A] is halved, the rate becomes (a) 3/4 of the original (b) 3/2 of the original (c) 1/2 of the original (d) 1/4 of the original
6. Which statement about molecularity is wrong? (a) It is a whole number (b) It is defined for an elementary step (c) It can be fractional (d) It cannot be zero
7. The percentage of a first-order reactant left after five half-lives is (a) 3.125% (b) 6.25% (c) 1.56% (d) 10%
8. A plot of ln k vs 1/T has slope −7.5 × 10³ K. Ea is about (a) 143.6 kJ mol⁻¹ (b) 62.4 kJ mol⁻¹ (c) 7.5 kJ mol⁻¹ (d) 31.2 kJ mol⁻¹
9. A reaction has temperature coefficient 2. Raising the temperature from 20 °C to 50 °C makes it (a) 6 times faster (b) 3 times faster (c) 8 times faster (d) 16 times faster
10. Which quantity does a catalyst change? (a) ΔH (b) Equilibrium constant (c) ΔG (d) Activation energy
11. Acid-catalysed inversion of cane sugar is first order because (a) water is in large excess (b) sucrose acts as a catalyst (c) H⁺ is used up (d) it is a unimolecular elementary step
12. A first-order reaction is 87.5% complete in 45 min. Its half-life is (a) 22.5 min (b) 15 min (c) 30 min (d) 11.25 min
13. For A + B → products: Exp 1, [A] = 0.10 M, [B] = 0.10 M, rate = 3.0 × 10⁻³ M s⁻¹; Exp 2, [A] = 0.20 M, [B] = 0.10 M, rate = 6.0 × 10⁻³ M s⁻¹; Exp 3, [A] = 0.10 M, [B] = 0.20 M, rate = 1.2 × 10⁻² M s⁻¹. The rate law is (a) k[A]²[B] (b) k[A][B] (c) k[A][B]² (d) k[A]²[B]²
14. The rate constant for the reaction in Q13 is (a) 0.30 L² mol⁻² s⁻¹ (b) 3.0 L² mol⁻² s⁻¹ (c) 30 L mol⁻¹ s⁻¹ (d) 3.0 L mol⁻¹ s⁻¹
15. A(g) → B(g) + C(g) is first order. Pure A starts at 0.30 atm in a rigid vessel; after 30 min the total pressure is 0.525 atm. The half-life is (a) 30 min (b) 7.5 min (c) 10 min (d) 15 min
16. A reaction has Ea(forward) = 65 kJ mol⁻¹ and Ea(backward) = 90 kJ mol⁻¹. ΔH is (a) +25 kJ mol⁻¹ (b) −25 kJ mol⁻¹ (c) −155 kJ mol⁻¹ (d) +155 kJ mol⁻¹
17. A first-order reaction has k = 1.155 × 10⁻³ s⁻¹. Its half-life is (a) 10 min (b) 6 min (c) 60 min (d) 1 min
18. For a first-order reaction, which plot is a straight line through the origin? (a) [A] vs t (b) log[A] vs 1/t (c) log([A]₀/[A]) vs t (d) 1/[A] vs t
19. A rate constant is 2.0 × 10⁻² s⁻¹ at 27 °C and 8.0 × 10⁻² s⁻¹ at 47 °C. Ea is about (a) 27.7 kJ mol⁻¹ (b) 55.3 kJ mol⁻¹ (c) 110.6 kJ mol⁻¹ (d) 13.8 kJ mol⁻¹
20. For 2NH₃ → N₂ + 3H₂, NH₃ disappears at 4.0 × 10⁻⁴ M s⁻¹. H₂ forms at (a) 1.2 × 10⁻³ M s⁻¹ (b) 2.0 × 10⁻⁴ M s⁻¹ (c) 6.0 × 10⁻⁴ M s⁻¹ (d) 8.0 × 10⁻⁴ M s⁻¹
21. Making [A] nine times larger only triples the rate. The order with respect to A is (a) 1/3 (b) 1/2 (c) 2 (d) 3
22. In collision theory, the factor that accounts for orientation of colliding molecules is (a) Z (b) Ea (c) A (d) P
23. A zero-order reaction has k = 2.5 × 10⁻⁴ M s⁻¹. The time for [A] to fall from 0.10 M to 0.040 M is (a) 240 s (b) 400 s (c) 160 s (d) 3665 s
24. A first-order reaction has k = 0.0231 min⁻¹. The percentage of reactant left after 60 min is (a) 50% (b) 12.5% (c) 25% (d) 75%
25. A rate constant has units L mol⁻¹ s⁻¹. If the concentration of the single reactant is doubled, the rate becomes (a) 2 times (b) 4 times (c) 8 times (d) unchanged
26. A mechanism is 2A → A₂ (slow) followed by A₂ + B → C (fast). The overall order is (a) 3 (b) 1 (c) 0 (d) 2
27. When the temperature of a gas rises, the total area under its Maxwell–Boltzmann curve (a) increases (b) decreases (c) doubles (d) remains the same
28. A first-order reaction is 99% complete in 46.06 min. Its half-life is (a) 6.93 min (b) 4.606 min (c) 23.03 min (d) 0.693 min
29. A reaction has Ea = 0 and k = 3.0 × 10⁻⁴ s⁻¹ at 300 K. At 350 K, k is (a) 6.0 × 10⁻⁴ s⁻¹ (b) 3.0 × 10⁻⁴ s⁻¹ (c) 1.5 × 10⁻⁴ s⁻¹ (d) 1.2 × 10⁻³ s⁻¹
30. Which statement about rate and rate constant is correct? (a) They have the same units only for a zero-order reaction (b) k depends on reactant concentration (c) k changes as the reaction proceeds (d) The rate never depends on temperature
31. In acid hydrolysis of an ester, NaOH titres are V₀ = 10 mL, V₄₀ min = 30 mL and V∞ = 50 mL. The rate constant is (a) 0.0173 min⁻¹ (b) 0.0347 min⁻¹ (c) 0.0116 min⁻¹ (d) 0.0693 min⁻¹
32. 2N₂O₅(g) → 4NO₂(g) + O₂(g) is first order. Pure N₂O₅ starts at 0.40 atm in a rigid vessel, and after 25 min the total pressure is 0.70 atm. The rate constant is about (a) 0.0139 min⁻¹ (b) 0.0554 min⁻¹ (c) 0.0277 min⁻¹ (d) 0.0462 min⁻¹
33. At 300 K, a catalyst lowers Ea by 11.5 kJ mol⁻¹ with A unchanged. The rate increases about (a) 10 times (b) 100 times (c) 1000 times (d) 4.6 times
34. A zero-order reaction starts at 0.80 M and its first half-life is 40 min. The time for [A] to go from 0.40 M to 0.20 M is (a) 40 min (b) 80 min (c) 10 min (d) 20 min
35. For 2NO(g) + 2H₂(g) → N₂(g) + 2H₂O(g), rate = k[NO]²[H₂]. If the volume of the vessel is halved, the rate becomes (a) 8 times (b) 4 times (c) 16 times (d) 2 times
36. In a first-order reaction, [A] falls from 0.60 M to 0.20 M in 22 min. The rate constant is about (a) 0.025 min⁻¹ (b) 0.10 min⁻¹ (c) 0.0316 min⁻¹ (d) 0.050 min⁻¹
37. A reaction has Ea = 100 kJ mol⁻¹. Raising the temperature from 300 K to 310 K multiplies k by about (a) 1.9 (b) 3.6 (c) 5.6 (d) 10
38. Doubling the initial concentration of a reactant doubles the half-life. The order of the reaction is (a) zero (b) first (c) second (d) third
39. For CHCl₃ + Cl₂ → CCl₄ + HCl, the mechanism is Cl₂ ⇌ 2Cl (fast), Cl + CHCl₃ → HCl + CCl₃ (slow), CCl₃ + Cl → CCl₄ (fast). The overall order is (a) 1 (b) 2 (c) 1.5 (d) 2.5
40. A first-order reaction is 90% complete in 1.0 h. The time for 99.9% completion is (a) 2 h (b) 10 h (c) 1.5 h (d) 3 h
41. A 10 K rise often doubles the rate of a reaction mainly because (a) the collision frequency doubles (b) the activation energy halves (c) the number of molecules with energy at least Ea roughly doubles (d) the factor A doubles
42. A first-order gas reaction has k = 3.0 × 10⁻³ s⁻¹ when concentrations are used. When partial pressures in atm are used, k is (a) 3.0 × 10⁻³ × RT (b) 3.0 × 10⁻³/RT (c) dependent on the pressure (d) 3.0 × 10⁻³ s⁻¹
43. Assertion (A): The rate constant of a zero-order reaction has the same units as the rate of reaction. Reason (R): For a zero-order reaction, rate = k. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
44. Assertion (A): The half-life of a first-order reaction becomes longer as the reaction proceeds. Reason (R): For a first-order reaction, t½ = 0.693/k. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
45. Statement I: A catalyst lowers the activation energy of a reaction. Statement II: The total area under a Maxwell–Boltzmann curve increases with temperature. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Half the SO₃ rate |
| 2 | a | (mol L⁻¹)^(−3/2) s⁻¹ |
| 3 | b | 0.693/69.3 |
| 4 | c | 0.60/(2 × 0.015) |
| 5 | d | (1/2)², B has order 0 |
| 6 | c | Molecularity is whole |
| 7 | a | 100/2⁵ |
| 8 | b | 7500 × 8.314 J mol⁻¹ |
| 9 | c | 2³ |
| 10 | d | New path, lower Ea |
| 11 | a | [H₂O] nearly constant |
| 12 | b | 87.5% = 3 half-lives |
| 13 | c | First in A, second in B |
| 14 | b | 3.0 × 10⁻³/(0.10 × 0.010) |
| 15 | d | p(A) = 0.60 − 0.525 = 0.075, two half-lives |
| 16 | b | 65 − 90 |
| 17 | a | 0.693/1.155 × 10⁻³ = 600 s |
| 18 | c | Slope k/2.303, zero intercept |
| 19 | b | log 4 × 2.303R × 4800 K |
| 20 | c | 4.0 × 10⁻⁴ × 3/2 |
| 21 | b | 9^x = 3 |
| 22 | d | Steric factor |
| 23 | a | 0.060/2.5 × 10⁻⁴ |
| 24 | c | kt = 1.386 = 2 half-lives |
| 25 | b | Second order: 2² |
| 26 | d | Slow step 2A: rate = k[A]² |
| 27 | d | Total molecules fixed |
| 28 | a | k = 4.606/46.06 = 0.1 min⁻¹ |
| 29 | b | Ea = 0 gives k = A |
| 30 | a | Rate = k only when n = 0 |
| 31 | a | log 2 × 2.303/40 |
| 32 | c | 0.40 + 1.5y = 0.70; half gone in 25 min |
| 33 | b | log ratio = 11 500/5744 = 2.0 |
| 34 | d | k = 0.010 M min⁻¹; 0.20/0.010 |
| 35 | a | 2² × 2 |
| 36 | d | (2.303/22) log 3 |
| 37 | b | log ratio = 0.562 |
| 38 | a | t½ ∝ [A]₀ |
| 39 | c | Rate = k[CHCl₃][Cl₂]^½ |
| 40 | d | t₉₉.₉ = 3 t₉₀ |
| 41 | c | Energy fraction effect |
| 42 | d | First-order k has no concentration unit |
| 43 | a | R gives A directly |
| 44 | d | First-order t½ is constant |
| 45 | c | Area under curve is constant |