Chapter 7 of 11 · 21 min read

Chapter 5: First-Order Reactions

In a first-order reaction the rate is proportional to the reactant concentration, so the reactant decays exponentially: ln[A] = ln[A]₀ − kt. Its half-life, 0.693/k, does not depend on the starting concentration, and this is the most tested idea in the unit.

What you will learn

  • The differential and integrated rate laws, with the derivation.

  • The straight-line plots that identify first order.

  • Half-life, fraction left after n half-lives, and percentage-completion times.

  • How to use pressure and titration data for first-order reactions.

  • Pseudo-first-order reactions.

5.1 Differential form

For R → P with first order:

Rate=−d[R]dt=k[R]\text{Rate} = -\frac{d[R]}{dt} = k[R]

The rate falls in step with [R]. Half the reactant left means half the rate.

5.2 Integrated form (derivation)

Separate the variables:

d[R][R]=−k dt\frac{d[R]}{[R]} = -k\,dt

Integrate from t = 0 ([R] = [R]₀) to t ([R]):

∫[R]0[R]d[R][R]=−k∫0tdt⇒ln⁡[R]−ln⁡[R]0=−kt\int_{[R]_0}^{[R]}\frac{d[R]}{[R]} = -k\int_0^t dt \quad\Rightarrow\quad \ln[R] - \ln[R]_0 = -kt

Three equivalent forms follow:

ln⁡[R]=ln⁡[R]0−kt\ln[R] = \ln[R]_0 - kt
[R]=[R]0 e−kt[R] = [R]_0\,e^{-kt}
k=2.303tlog⁡[R]0[R]k = \frac{2.303}{t}\log\frac{[R]_0}{[R]}

In NEET problems the last form is used most. If a is the initial amount and x has reacted, [R]₀/[R] = a/(a − x).

Between two times t₁ and t₂:

k=2.303t2−t1log⁡[R]1[R]2k = \frac{2.303}{t_2 - t_1}\log\frac{[R]_1}{[R]_2}

5.3 Graphs

  • [R] vs t: exponential decay. It approaches zero but never touches it, so the reaction never strictly finishes.

  • ln[R] vs t: straight line, slope −k, intercept ln[R]₀.

  • log[R] vs t: straight line, slope −k/2.303.

  • log([R]₀/[R]) vs t: straight line through the origin, slope k/2.303.

  • Rate vs [R]: straight line through the origin, slope k.

Figure 5.1 · First-order graphs: [A] vs t and ln[A] vs t
Figure 5.1 · First-order graphs: [A] vs t and ln[A] vs t

Every half-life cuts [A] in half, so [A] never quite reaches zero; plotting ln[A] instead turns the curve into a straight line whose slope is −k.

5.4 Half-life

Put [R] = [R]₀/2 in the integrated law:

t1/2=2.303klog⁡2=0.693kt_{1/2} = \frac{2.303}{k}\log 2 = \frac{0.693}{k}

t½ does not depend on [R]₀. Whether you start with 1 M or 0.01 M, it takes the same time to lose half. This is why radioactive decay is described by a fixed half-life.

After n half-lives:

[R]=[R]02n,n=tt1/2[R] = \frac{[R]_0}{2^n}, \qquad n = \frac{t}{t_{1/2}}
Figure 5.2 · Half-life vs initial concentration for zero and first order
Figure 5.2 · Half-life vs initial concentration for zero and first order

If t½ rises in proportion to [A]₀ the reaction is zero order; if t½ stays the same whatever [A]₀ is, the reaction is first order.

5.5 Percentage-completion times

Time for a fraction f to react: t = (2.303/k) log[1/(1 − f)].

CompletionFormulaIn terms of t½
50%0.693/kt½
75%1.386/k2 t½
87.5%2.079/k3 t½
90%2.303/k3.32 t½
99%4.606/k6.64 t½
99.9%6.909/k≈ 10 t½

The last row comes from log 1000 = 3: t₉₉.₉ = 3 × 2.303/k = 6.909/k, and 6.909/0.693 = 9.97, about 10.

Useful ratios: t₉₉ = 2 t₉₀ and t₉₉.₉ = 3 t₉₀.

5.6 First-order data from pressure and titration

Gas phase. For A(g) → B(g) + C(g) at constant V and T, with pure A at p₀ and total pressure pₜ at time t: let p(A) fall by x. Then pₜ = p₀ + x, so x = pₜ − p₀ and p(A) = p₀ − x = 2p₀ − pₜ.

k=2.303tlog⁡p02p0−ptk = \frac{2.303}{t}\log\frac{p_0}{2p_0 - p_t}

For other stoichiometry, always write p(A) in terms of x first; do not memorise this form blindly.

Acid hydrolysis of an ester followed by titration with NaOH. The acid formed raises the titre. If V₀, Vₜ and V∞ are titres at the start, at time t and at the end:

k=2.303tlog⁡V∞−V0V∞−Vtk = \frac{2.303}{t}\log\frac{V_\infty - V_0}{V_\infty - V_t}

5.7 Pseudo-first-order reactions

Some reactions involve two reactants, yet behave as first order because one reactant is present in huge excess and its concentration hardly changes.

Acid hydrolysis of ethyl acetate:

CH3COOC2H5+H2O→H+CH3COOH+C2H5OH\mathrm{CH_3COOC_2H_5 + H_2O \xrightarrow{H^+} CH_3COOH + C_2H_5OH}
Rate=k[ester][H2O]=k′[ester],k′=k[H2O]\text{Rate} = k[\text{ester}][\mathrm{H_2O}] = k'[\text{ester}], \quad k' = k[\mathrm{H_2O}]

Water is about 55.5 M in dilute solution, while the ester may be 0.01 M. Using up 0.01 M of water barely changes 55.5 M. So [H₂O] is a constant folded into k′.

Inversion of cane sugar (sucrose) is the other standard example:

C12H22O11+H2O→H+C6H12O6 (glucose)+C6H12O6 (fructose)\mathrm{C_{12}H_{22}O_{11} + H_2O \xrightarrow{H^+} C_6H_{12}O_6\,(glucose) + C_6H_{12}O_6\,(fructose)}

Both have molecularity 2 but order 1. The acid is a catalyst, so it does not appear in the overall equation, though k′ depends on [H⁺].

5.8 Common first-order reactions

  • All radioactive decays, e.g. ²²⁶Ra → ²²²Rn + ⁴He.

  • 2N₂O₅(g) → 4NO₂(g) + O₂(g).

  • SO₂Cl₂(g) → SO₂(g) + Cl₂(g).

  • 2H₂O₂ → 2H₂O + O₂.

  • Cyclopropane → propene; N₂O → N₂ + ½O₂ (at moderate pressure).

  • Pseudo-first order: acid hydrolysis of esters, inversion of sucrose.

5.9 Zero order and first order compared

FeatureZero orderFirst order
Differential form−d[R]/dt = k−d[R]/dt = k[R]
Integrated form[R] = [R]₀ − ktln[R] = ln[R]₀ − kt
Linear plot[R] vs tln[R] (or log[R]) vs t
Slope of linear plot−k−k (or −k/2.303 for log)
Units of kmol L⁻¹ s⁻¹s⁻¹
Half-life[R]₀/2k, proportional to [R]₀0.693/k, independent of [R]₀
CompletionFinite: [R]₀/kNever strictly complete
Rate over timeConstantFalls exponentially

Worked example 5.1: A first-order reaction has t½ = 30 min. Find k.

Solution: k = 0.693/30 = 0.0231 min⁻¹ = 2.31 × 10⁻² min⁻¹.

Worked example 5.2: For a first-order reaction, k = 0.0462 min⁻¹. What fraction is left after 1 hour?

Solution: t½ = 0.693/0.0462 = 15 min. 60 min = 4 half-lives. Fraction left = 1/2⁴ = 1/16.

Worked example 5.3: [A] falls from 0.50 M to 0.15 M in 30 min in a first-order reaction. Find k and t½.

Solution: k = (2.303/30) log(0.50/0.15) = (2.303/30) × 0.523 = 0.0401 min⁻¹. t½ = 0.693/0.0401 = 17.3 min.

Worked example 5.4: k = 2.303 × 10⁻² min⁻¹ for a first-order reaction. How long does 90% completion take?

Solution: t = (2.303/k) log(100/10) = (2.303/2.303 × 10⁻²) × 1 = 100 min.

Worked example 5.5: Show that t₉₉.₉ is about 10 t½ for any first-order reaction.

Solution: t₉₉.₉ = (2.303/k) log(100/0.1) = (2.303/k) × 3 = 6.909/k. t½ = 0.693/k. Ratio = 6.909/0.693 = 9.97 ≈ 10.

Worked example 5.6: SO₂Cl₂(g) → SO₂(g) + Cl₂(g) is first order. Pure SO₂Cl₂ starts at 0.50 atm in a rigid vessel; after 100 s the total pressure is 0.60 atm. Find k.

Solution: p(SO₂Cl₂) = 2p₀ − pₜ = 1.00 − 0.60 = 0.40 atm. k = (2.303/100) log(0.50/0.40) = (2.303/100) × 0.0969 = 2.23 × 10⁻³ s⁻¹.

Worked example 5.7: In acid hydrolysis of methyl acetate, titres against NaOH are V₀ = 20 mL, V₃₀ min = 30 mL and V∞ = 40 mL. Find k.

Solution: k = (2.303/30) log[(40 − 20)/(40 − 30)] = (2.303/30) log 2 = 0.693/30 = 0.0231 min⁻¹. Half the reaction was over in 30 min, which matches.

Worked example 5.8: A first-order reaction is 20% complete in 10 min. How long does 75% completion take?

Solution: k = (2.303/10) log(100/80) = 0.2303 × 0.0969 = 0.0223 min⁻¹. t₇₅ = (2.303/0.0223) log 4 = 1.386/0.0223 = 62.1 min.

Worked example 5.9: A first-order reaction has rate 2.4 × 10⁻⁴ M s⁻¹ when [A] = 0.040 M. Find k and t½.

Solution: k = rate/[A] = 2.4 × 10⁻⁴/0.040 = 6.0 × 10⁻³ s⁻¹. t½ = 0.693/(6.0 × 10⁻³) = 115.5 s.

Quick revision

  • −d[R]/dt = k[R]; ln[R] = ln[R]₀ − kt; k = (2.303/t) log([R]₀/[R]).

  • ln[R] vs t is linear with slope −k; log[R] vs t has slope −k/2.303.

  • t½ = 0.693/k, independent of [R]₀. After n half-lives, [R] = [R]₀/2ⁿ.

  • t₇₅ = 2t½, t₈₇.₅ = 3t½, t₉₀ = 2.303/k, t₉₉ = 2t₉₀, t₉₉.₉ ≈ 10t½.

  • Gas A → B + C: p(A) = 2p₀ − pₜ.

  • Pseudo-first order: ester hydrolysis and sucrose inversion in acid; molecularity 2, order 1.

NEET traps

  • Using natural log and 2.303 together. Either ln, or 2.303 × log, never both.

  • Reading log([R]₀/[R]) upside down, which gives a negative k.

  • Saying t½ of a first-order reaction changes when [R]₀ changes. It does not; the initial rate does.

  • Using the gas formula 2p₀ − pₜ for reactions like 2N₂O₅ → 4NO₂ + O₂ where the mole change is different.

  • Calling sucrose inversion bimolecular in order. Its molecularity is 2; its order is 1.

  • Mixing per-minute k with time in seconds.

Practice MCQs: Chapter 5

Level 1: Concept check

1. The integrated rate law for a first-order reaction is (a) [A] = [A]₀ − kt (b) 1/[A] = 1/[A]₀ + kt (c) ln[A] = ln[A]₀ − kt (d) [A] = [A]₀ + kt

2. The half-life of a first-order reaction is (a) 0.693/k (b) [A]₀/2k (c) 1/k[A]₀ (d) 2.303/k

3. Which plot is a straight line for a first-order reaction? (a) [A] vs t (b) ln[A] vs t (c) 1/[A] vs t (d) [A]² vs t

4. The half-life of a first-order reaction is (a) proportional to [A]₀ (b) inversely proportional to [A]₀ (c) proportional to [A]₀² (d) independent of [A]₀

5. For a first-order reaction, the slope of log[A] vs t is (a) −k (b) −k/2.303 (c) k/2.303 (d) −2.303k

6. Which is a pseudo-first-order reaction? (a) Hydrolysis of ethyl acetate in dilute acid (b) Decomposition of NH₃ on hot Pt at high pressure (c) H₂ + I₂ → 2HI (d) 2NO + O₂ → 2NO₂

7. For a first-order reaction, t₉₉.₉ is roughly (a) 2 t½ (b) 6.64 t½ (c) 10 t½ (d) 3.32 t½

8. The fraction of a first-order reactant left after three half-lives is (a) 1/3 (b) 1/6 (c) 1/9 (d) 1/8

9. All radioactive decay processes follow (a) zero-order kinetics (b) first-order kinetics (c) second-order kinetics (d) third-order kinetics

10. For a first-order reaction, the time for 75% completion equals (a) 2 t½ (b) 1.5 t½ (c) 3 t½ (d) 4 t½

Level 2: NEET standard

11. A first-order reaction has t½ = 46.2 min. Its rate constant is (a) 0.015 min⁻¹ (b) 0.030 min⁻¹ (c) 0.0217 min⁻¹ (d) 32.0 min⁻¹

12. For a first-order reaction, k = 5.0 × 10⁻³ s⁻¹. The time for [A] to fall to 1/16 of its initial value is (a) 277 s (b) 554 s (c) 416 s (d) 3200 s

13. A first-order reaction is 90% complete in 60 min. Its half-life is about (a) 30 min (b) 6 min (c) 18 min (d) 20 min

14. In a first-order reaction, [A] falls from 0.80 M to 0.10 M in 45 min. The half-life is (a) 22.5 min (b) 30 min (c) 11.25 min (d) 15 min

15. For a first-order reaction with k = 0.0693 min⁻¹, the time for [A] to fall to one-tenth is about (a) 33.2 min (b) 10 min (c) 23.0 min (d) 66.4 min

16. A first-order reaction has rate 1.8 × 10⁻⁵ M s⁻¹ when [A] = 0.030 M. Its k and t½ are (a) 5.4 × 10⁻⁷ s⁻¹ and 1.3 × 10⁶ s (b) 6.0 × 10⁻⁴ s⁻¹ and 1667 s (c) 6.0 × 10⁻⁴ s⁻¹ and 1155 s (d) 1.7 × 10³ s⁻¹ and 4.1 × 10⁻⁴ s

17. The molecularity and order of acid-catalysed inversion of cane sugar are respectively (a) 2 and 1 (b) 1 and 1 (c) 2 and 2 (d) 1 and 2

18. A first-order reaction is 30% complete in 15 min. The time for 60% completion is about (a) 30 min (b) 38.5 min (c) 45 min (d) 25.7 min

19. A(g) → B(g) + C(g) is first order. Pure A starts at 0.40 atm in a rigid vessel; after 20 min the total pressure is 0.70 atm. The half-life is (a) 20 min (b) 5 min (c) 13.3 min (d) 10 min

20. The initial concentration of a first-order reactant is doubled. Then (a) t½ doubles and the initial rate doubles (b) both t½ and the initial rate are unchanged (c) t½ is unchanged and the initial rate doubles (d) t½ halves and the initial rate is unchanged

21. A plot of log([A]₀/[A]) vs t for a first-order reaction has slope 2.0 × 10⁻³ s⁻¹. The half-life is about (a) 346 s (b) 150 s (c) 75 s (d) 1.5 × 10³ s

22. In acid hydrolysis of an ester, NaOH titres are V₀ = 15 mL, V₂₀ min = 30 mL and V∞ = 45 mL. The rate constant is (a) 0.0693 min⁻¹ (b) 0.0231 min⁻¹ (c) 0.0139 min⁻¹ (d) 0.0347 min⁻¹

Level 3: Challenge

23. A first-order reaction is 25% complete in 20 min. The time for 75% completion is about (a) 60 min (b) 96.4 min (c) 80 min (d) 120 min

24. First-order reactions A and B start at the same concentration, with half-lives of 10 min and 20 min. After 60 min, [A]/[B] is (a) 1/2 (b) 1/4 (c) 1/8 (d) 1/64

25. For a first-order reaction, the ratio t₉₉/t₉₀ is (a) 2 (b) 1.1 (c) 10 (d) 3

26. Ester hydrolysis in a buffer is pseudo-first order, with k′ proportional to [H⁺]. At pH 2, k′ = 4.6 × 10⁻³ min⁻¹. At pH 3, the half-life is about (a) 150 min (b) 15 min (c) 1.5 × 10⁴ min (d) 1.5 × 10³ min

27. 2N₂O₅(g) → 4NO₂(g) + O₂(g) is first order. Pure N₂O₅ starts at 0.60 atm in a rigid vessel. When the total pressure is 0.96 atm, p(N₂O₅) is (a) 0.24 atm (b) 0.36 atm (c) 0.48 atm (d) 0.12 atm

28. A first-order reaction has k = 6.93 × 10⁻³ s⁻¹. The time for [A] to fall from 0.40 M to 0.050 M is (a) 100 s (b) 200 s (c) 300 s (d) 400 s

29. Assertion (A): For any first-order reaction, 99.9% completion takes about ten half-lives. Reason (R): t₉₉.₉ = (2.303/k) log 1000 = 6.909/k, which is about ten times 0.693/k. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: For a first-order reaction, a graph of [A] vs t is a straight line of slope −k. Statement II: The half-life of a first-order reaction does not depend on the initial concentration. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cIntegrate d[A]/[A] = −k dt
2a2.303 log 2/k
3bln[A] linear in t
4dt½ = 0.693/k
5blog = ln/2.303
6aWater in large excess
7c6.909/0.693 ≈ 10
8d(1/2)³
9bDecay rate ∝ nuclei present
10a25% left = 2 half-lives
11a0.693/46.2
12b4 × 138.6 s
13ck = 2.303/60, t½ = 18.05 min
14d0.80 → 0.10 is 3 half-lives
15a2.303/0.0693
16ck = rate/[A]; 0.693/k
17aTwo species collide; water in excess
18b15 × log 2.5/log(1/0.7)
19dp(A) = 0.80 − 0.70 = 0.10, two half-lives
20ct½ fixed; rate ∝ [A]
21bk = 4.606 × 10⁻³ s⁻¹; 0.693/k
22dlog 2 × 2.303/20
23b20 × log 4/log(4/3)
24c(1/64)/(1/8)
25alog 100/log 10
26dk′ = 4.6 × 10⁻⁴; 0.693/k′ ≈ 1506 min
27bTotal = 0.60 + 1.5y, y = 0.24
28cThree half-lives of 100 s
29aR is the working for A
30d[A] vs t is exponential

Chapter 5 revision sheet

One-page summary

  • First order: rate = k[A]; doubling [A] doubles the rate.

  • Differential form: −d[A]/dt = k[A]. Integrated form: ln[A] = ln[A]₀ − kt.

  • Working form: k = (2.303/t) log([A]₀/[A]).

  • Exponential form: [A] = [A]₀ e^(−kt).

  • Unit of k: time⁻¹ (s⁻¹, min⁻¹), so k does not depend on the concentration unit.

  • Half-life: t½ = 0.693/k, independent of [A]₀.

  • After n half-lives, the fraction left is (1/2)ⁿ.

  • t₉₀ = 2.303/k, t₉₉ = 4.606/k = 2 t₉₀, t₉₉.₉ = 6.909/k ≈ 10 t½.

  • In theory the reaction never reaches 100% in finite time.

  • Straight-line plots: ln[A] vs t (slope −k), log[A] vs t (slope −k/2.303), log([A]₀/[A]) vs t (slope k/2.303 through origin).

  • Gas phase A(g) → B(g) + C(g): p(A) = 2p₀ − p(t), and k = (2.303/t) log[p₀/(2p₀ − p(t))].

  • Examples: decomposition of N₂O₅, H₂O₂ decomposition, radioactive decay, hydrogenation of ethene.

  • Pseudo-first order: acid hydrolysis of ethyl acetate; inversion of cane sugar followed by a polarimeter.

k=2.303tlog⁡[A]0[A],t1/2=0.693k,[A][A]0=(12)nk = \frac{2.303}{t}\log\frac{[A]_0}{[A]}, \qquad t_{1/2} = \frac{0.693}{k}, \qquad \frac{[A]}{[A]_0} = \left(\frac{1}{2}\right)^{n}

Must-remember table

CompletionFraction leftTime
50%1/21 t½ = 0.693/k
75%1/42 t½
87.5%1/83 t½
90%1/102.303/k ≈ 3.32 t½
93.75%1/164 t½
99%1/1004.606/k ≈ 6.64 t½
99.9%1/10006.909/k ≈ 10 t½

Memory aids

  • "Half-life Holds steady": first order is the only order whose t½ does not depend on [A]₀.

  • "2.303 for 90, double for 99": t₉₀ = 2.303/k and t₉₉ = 4.606/k.

  • "Ten halves for three nines": 99.9% completion takes about 10 half-lives.

  • "Two p-nought minus total": for A(g) → B(g) + C(g), p(A) = 2p₀ − p(t).

Concept connections

  • Physics Book 18: Atoms and Nuclei: radioactive decay uses the same law, N = N₀e^(−λt) and t½ = 0.693/λ.

  • Chemistry Book 19: Biomolecules: inversion of cane sugar into glucose and fructose is the standard pseudo-first-order example.

  • Physics Book 14: Electromagnetic Induction and Alternating Currents: current decay in an LR circuit follows the same exponential shape.

Practice MCQs: Chapter 5, Level 4 (new NEET pattern)

31. For a first-order reaction, match the percentage completed (List I) with the time needed (List II).

List I:

  • A. 50%

  • B. 75%

  • C. 87.5%

  • D. 93.75%

List II:

  • i. 3 t½

  • ii. 1 t½

  • iii. 4 t½

  • iv. 2 t½

(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iv, B-ii, C-i, D-iii (d) A-ii, B-iv, C-iii, D-i

32. For a first-order reaction, match the plot (List I) with its slope (List II).

List I:

  • A. ln[A] against t

  • B. log[A] against t

  • C. log([A]₀/[A]) against t

  • D. t½ against [A]₀

List II:

  • i. −k/2.303

  • ii. Zero (horizontal line)

  • iii. −k

  • iv. +k/2.303

(a) A-i, B-iii, C-iv, D-ii (b) A-iii, B-iv, C-i, D-ii (c) A-iii, B-i, C-iv, D-ii (d) A-iii, B-i, C-ii, D-iv

33. Match the order (List I) with how t½ depends on [A]₀ (List II).

List I:

  • A. Zero order

  • B. First order

  • C. Second order

  • D. nth order

List II:

  • i. Independent of [A]₀

  • ii. Proportional to [A]₀^(1−n)

  • iii. Proportional to 1/[A]₀

  • iv. Proportional to [A]₀

(a) A-i, B-iv, C-iii, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iv, B-i, C-ii, D-iii (d) A-iv, B-i, C-iii, D-ii

34. A first-order reaction has k = 0.0693 min⁻¹. Match List I with List II.

List I:

  • A. Half-life

  • B. Time for 75% completion

  • C. Time for 90% completion

  • D. Time for 99% completion

List II:

  • i. 33.2 min

  • ii. 10 min

  • iii. 66.5 min

  • iv. 20 min

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-i, C-iv, D-iii

35. How many of the following statements about first-order reactions are correct?

  • A. The half-life does not depend on the initial concentration.

  • B. The unit of k is time⁻¹.

  • C. In theory, the reaction never becomes 100% complete in finite time.

  • D. Doubling [A]₀ doubles the time for 50% completion.

  • E. Radioactive decay follows first-order kinetics.

  • F. The time for 99.9% completion is about 10 half-lives.

(a) Three (b) Four (c) Five (d) Six

36. A → products is first order with k = 6.93 × 10⁻³ s⁻¹ and [A]₀ = 0.10 M. Choose the correct set of statements.

  • A. The half-life is 100 s.

  • B. After 200 s, 25% of A remains.

  • C. The initial rate is 6.93 × 10⁻⁴ M s⁻¹.

  • D. The rate after 100 s equals the initial rate.

(a) A and B only (b) B, C and D only (c) A and D only (d) A, B and C only

37. A(g) → B(g) + C(g) is first order. Pure A at pressure p₀ is placed in a rigid vessel; p(t) is the total pressure at time t. Choose the correct set of statements.

  • A. p(A) = 2p₀ − p(t).

  • B. k = (2.303/t) log[p₀/(2p₀ − p(t))].

  • C. When p(t) = 1.5p₀, one half-life has passed.

  • D. The final total pressure is 3p₀.

(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D

38. How many of the following statements about the acid-catalysed inversion of cane sugar are correct?

  • A. Sucrose + water gives glucose + fructose.

  • B. The rate law is effectively rate = k′[sucrose].

  • C. The reaction is followed by measuring optical rotation with a polarimeter.

  • D. The rotation changes from dextro to laevo, which gives the name "inversion".

  • E. The concentration of water changes a lot during the reaction.

(a) Three (b) Four (c) Five (d) Two

39. Concentration of A at different times:

t (min)0102030
[A] (M)0.800.400.200.10

Which is correct? (a) Zero order, k = 0.040 M min⁻¹ (b) Second order, k = 0.125 L mol⁻¹ min⁻¹ (c) First order, k = 0.0347 min⁻¹ (d) First order, k = 0.0693 min⁻¹

40. For a first-order reaction, a plot of log[A] (y-axis) against t in minutes (x-axis) is a straight line with slope −0.010 min⁻¹. The half-life is about (a) 30 min (b) 69.3 min (c) 3.0 min (d) 100 min

41. A(g) → B(g) + C(g) is first order. Pure A at 0.40 atm is taken in a rigid vessel. After 10 min the total pressure is 0.60 atm. The rate constant is (a) 0.0347 min⁻¹ (b) 0.0405 min⁻¹ (c) 0.0693 min⁻¹ (d) 0.139 min⁻¹

Case for Q42–43: A doctor gives an antibiotic injection. Its blood level falls by first-order kinetics with a half-life of 4 hours. Just after the dose, the blood level is 16 mg L⁻¹.

42. The time for the level to fall to 2 mg L⁻¹ is (a) 8 h (b) 12 h (c) 16 h (d) 32 h

43. The blood level 6 hours after the dose is about (a) 5.7 mg L⁻¹ (b) 4.0 mg L⁻¹ (c) 8.0 mg L⁻¹ (d) 6.0 mg L⁻¹

44. Two first-order reactions start with equal concentrations of A and B. The half-life of A is 10 min and that of B is 20 min. After 60 min, [A]/[B] is (a) 1/2 (b) 1/4 (c) 1/64 (d) 1/8

45. A first-order reaction is 20% complete in 10 min. The time for 75% completion is about (log 1.25 = 0.0969, log 4 = 0.602) (a) 37.5 min (b) 31 min (c) 62 min (d) 75 min

Level 4 answer key

QAnsReason
31bFraction left 1/2, 1/4, 1/8, 1/16 means 1, 2, 3, 4 half-lives
32cln[A] = ln[A]₀ − kt; divide by 2.303 for log; t½ is constant
33dt½ ∝ [A]₀^(1−n): n = 0, 1, 2 give [A]₀, constant, 1/[A]₀
34a0.693/0.0693 = 10; 2 × 10 = 20; 2.303/0.0693 = 33.2; 4.606/0.0693 = 66.5
35cAll except D; first-order t½ does not depend on [A]₀
36dt½ = 0.693/0.00693 = 100 s; 2 t½ leaves 25%; rate = k[A]₀; the rate halves by 100 s
37ap(t) = p₀ + x, p(A) = p₀ − x = 2p₀ − p(t); at the end p(t) = 2p₀
38bA, B, C and D are true; water is in large excess, so its concentration hardly changes
39dConstant t½ of 10 min means first order; k = 0.693/10
40ak = 2.303 × 0.010 = 0.0230 min⁻¹; t½ = 0.693/0.0230 ≈ 30 min
41cp(A) = 2(0.40) − 0.60 = 0.20 atm, one t½ in 10 min; k = 0.0693 min⁻¹
42b16 → 8 → 4 → 2 is 3 half-lives = 12 h
43a6 h = 1.5 t½: 16 × (1/2)^1.5 = 16 × 0.354 = 5.7 mg L⁻¹
44dA: (1/2)⁶ = 1/64; B: (1/2)³ = 1/8; ratio = 1/8
45ct₇₅/t₂₀ = log 4/log 1.25 = 0.602/0.0969 = 6.21; 6.21 × 10 ≈ 62 min
21 min left
‹
›