Chapter 5 of 11 · 24 min read

Chapter 3: Rate Law, Order and Molecularity

The rate law links rate to concentration through a rate constant k and exponents that only experiment can give. Order is the sum of those exponents; molecularity is the number of particles that collide in one elementary step.

What you will learn

  • How to write a rate law and read its order.

  • The units of k for any order.

  • How to find order from initial-rates data.

  • The difference between elementary and complex reactions, and between order and molecularity.

  • How the slowest step of a mechanism fixes the rate law.

3.1 The rate law

For a reaction aA + bB → products, experiment shows that the rate is proportional to each concentration raised to some power:

Rate=k[A]x[B]y\text{Rate} = k[A]^x[B]^y

This is the rate law (or rate expression). k is the rate constant. x and y are found by experiment. They may or may not equal a and b.

ReactionExperimental rate lawOrder
2NO + O₂ → 2NO₂k[NO]²[O₂]3
2N₂O₅ → 4NO₂ + O₂k[N₂O₅]1
CHCl₃ + Cl₂ → CCl₄ + HClk[CHCl₃][Cl₂]^½1.5
CH₃CHO → CH₄ + COk[CH₃CHO]^(3/2)1.5
2NH₃ → N₂ + 3H₂ (on hot Pt)k[NH₃]⁰ = k0

The second row shows why you cannot read the rate law from the equation. The coefficient of N₂O₅ is 2, but the order is 1.

3.2 Order of a reaction

Order with respect to A is x. Overall order is the sum:

n=x+y+…n = x + y + \dots

Order is an experimental quantity. It can be 0, a whole number, a fraction, or even negative. A negative order means that species slows the reaction, for example a product that blocks the surface of a catalyst.

3.3 The rate constant and its units

k is the rate when every concentration in the rate law is 1 mol L⁻¹. That is why it is also called the specific reaction rate. It depends on temperature and catalyst, not on concentration.

From rate = k[A]ⁿ, k = rate/[A]ⁿ. So:

units of k=mol L−1 s−1(mol L−1)n=(mol L−1)1−n s−1\text{units of } k = \frac{\text{mol L}^{-1}\text{ s}^{-1}}{(\text{mol L}^{-1})^n} = (\text{mol L}^{-1})^{1-n}\,\text{s}^{-1}
Order nUnits of k (concentration)Units of k (gas pressure)
0mol L⁻¹ s⁻¹atm s⁻¹
1/2mol^½ L^−½ s⁻¹atm^½ s⁻¹
1s⁻¹s⁻¹
3/2L^½ mol^−½ s⁻¹atm^−½ s⁻¹
2L mol⁻¹ s⁻¹atm⁻¹ s⁻¹
3L² mol⁻² s⁻¹atm⁻² s⁻¹

Only for first order are the units free of concentration. That is why first-order k can be compared directly whether you track concentration, pressure or volume of gas.

Reverse use: from the units of k you can read the order. If k is in L mol⁻¹ min⁻¹, the order is 2.

3.4 Finding order from initial rates

The initial-rates method runs the reaction several times with different starting concentrations and measures the rate at the very start, before concentrations change much. Change one concentration at a time.

If [A] is multiplied by p and the rate is multiplied by q, with everything else fixed:

q=px⇒x=log⁡qlog⁡pq = p^x \quad\Rightarrow\quad x = \frac{\log q}{\log p}

Patterns worth memorising: concentration doubled and rate unchanged means order 0; rate doubled means order 1; rate × 4 means order 2; rate × 8 means order 3; rate × √2 means order ½.

Once the orders are known, put any one experiment's numbers into the rate law to get k.

3.5 Elementary and complex reactions

An elementary reaction happens in a single step: the particles written on the left collide and form the products directly.

A complex reaction happens through a sequence of elementary steps. The sequence is called the mechanism. Species formed in one step and used up in a later step are intermediates. They do not appear in the overall equation.

Molecularity is the number of reacting particles (atoms, ions or molecules) that must collide at the same time in an elementary step.

MolecularityExample step
Unimolecular (1)NH₄NO₂ → N₂ + 2H₂O
Bimolecular (2)2HI → H₂ + I₂
Termolecular (3)2NO + O₂ → 2NO₂

Steps with more than three particles colliding at once are almost never seen. Even a three-body collision with the right energy and orientation is rare, like three friends arriving at the same tea stall at exactly the same second.

For an elementary step, the rate law can be written straight from the step. For A + B → products as one step, rate = k[A][B]. Here order equals molecularity.

3.6 Mechanism and the rate-determining step

In a sequence of steps, the overall rate cannot be faster than the slowest step. That slowest step is the rate-determining step. Think of a single toll booth on a highway: however fast the cars drive, they pass at the rate of the toll booth.

Example: 2NO₂ + F₂ → 2NO₂F has the experimental rate law rate = k[NO₂][F₂]. A mechanism that fits:

NO2+F2→NO2F+F(slow)\mathrm{NO_2 + F_2 \rightarrow NO_2F + F} \quad (\text{slow})
NO2+F→NO2F(fast)\mathrm{NO_2 + F \rightarrow NO_2F} \quad (\text{fast})

The slow step involves one NO₂ and one F₂, so rate = k[NO₂][F₂]. The F atom is an intermediate.

Figure 3.1 · Two-step mechanism for 2NO₂ + F₂ → 2NO₂F
Figure 3.1 · Two-step mechanism for 2NO₂ + F₂ → 2NO₂F

Only the slow step's reactants, one NO₂ and one F₂, enter the rate law; the F atom is made in step 1 and used in step 2, so it never appears in the overall equation.

A catalysed example: decomposition of H₂O₂ in alkaline medium with I⁻.

H2O2+I−→H2O+IO−(slow)\mathrm{H_2O_2 + I^- \rightarrow H_2O + IO^-} \quad (\text{slow})
H2O2+IO−→H2O+I−+O2(fast)\mathrm{H_2O_2 + IO^- \rightarrow H_2O + I^- + O_2} \quad (\text{fast})

Rate = k[H₂O₂][I⁻]. The reaction is first order in each and second order overall. I⁻ is the catalyst (used in step 1, given back in step 2). IO⁻ is the intermediate (formed in step 1, used in step 2).

When a fast step comes first, it sets up an equilibrium, and the intermediate is replaced using K. For 2NO + Br₂ → 2NOBr:

NO+Br2⇌NOBr2(fast, K)\mathrm{NO + Br_2 \rightleftharpoons NOBr_2} \quad (\text{fast, } K)
NOBr2+NO→2NOBr(slow, k2)\mathrm{NOBr_2 + NO \rightarrow 2NOBr} \quad (\text{slow, } k_2)
Rate=k2[NOBr2][NO]=k2K[NO]2[Br2]\text{Rate} = k_2[\mathrm{NOBr_2}][\mathrm{NO}] = k_2K[\mathrm{NO}]^2[\mathrm{Br_2}]

The overall order is 3, though no single step needs three particles to collide.

3.7 Order versus molecularity

FeatureOrderMolecularity
Defined forAny reaction (from experiment)Elementary step only
Found byExperimentTheory of the mechanism
Values0, integer, fraction, negative1, 2 or 3 (whole number, never 0)
For a complex reactionOverall order is meaningfulMeaningless for the overall reaction; applies to each step
Can change with conditionsYes (e.g. pseudo-first order)No

Worked example 3.1: Give the units of k for a second-order reaction and for a reaction of order 3/2. Use mol, L and s.

Solution: Units = (mol L⁻¹)^(1−n) s⁻¹. For n = 2: (mol L⁻¹)⁻¹ s⁻¹ = L mol⁻¹ s⁻¹. For n = 3/2: (mol L⁻¹)^(−½) s⁻¹ = L^½ mol^−½ s⁻¹.

Worked example 3.2: Identify the order from the units: (i) k = 2.5 × 10⁻³ mol L⁻¹ s⁻¹ (ii) k = 3.4 × 10⁻⁴ L² mol⁻² s⁻¹.

Solution: (i) 1 − n = 1, so n = 0. (ii) 1 − n = −2, so n = 3.

Worked example 3.3: Rate = k[A]^½[B]². Give the order, and the change in rate if both concentrations are doubled.

Solution: Order = ½ + 2 = 2.5. New rate = 2^½ × 2² = 2^2.5 ≈ 5.66 times the old rate.

Worked example 3.4: For A + B → products, initial-rates data at 300 K are:

Exp[A] (M)[B] (M)Initial rate (M s⁻¹)
10.100.102.0 × 10⁻⁴
20.200.108.0 × 10⁻⁴
30.100.306.0 × 10⁻⁴

Find the rate law, k and the rate when [A] = 0.30 M and [B] = 0.20 M.

Solution: Exp 1 to 2: [A] × 2, rate × 4, so order in A = 2. Exp 1 to 3: [B] × 3, rate × 3, so order in B = 1. Rate = k[A]²[B]. From Exp 1: k = 2.0 × 10⁻⁴/(0.010 × 0.10) = 0.20 L² mol⁻² s⁻¹. New rate = 0.20 × (0.30)² × 0.20 = 3.6 × 10⁻³ M s⁻¹.

Worked example 3.5: Doubling [A] makes the rate 2.83 times. Find the order in A.

Solution: 2^x = 2.83. x = log 2.83/log 2 = 0.452/0.301 = 1.5.

Worked example 3.6: For 2NO₂ + F₂ → 2NO₂F, the proposed slow step is NO₂ + F₂ → NO₂F + F. Give the rate law, the overall order and the molecularity of the slow step.

Solution: Rate = k[NO₂][F₂]. Overall order = 2. The slow step has two colliding particles, so it is bimolecular.

Worked example 3.7: For 2NO + Br₂ → 2NOBr, the mechanism is NO + Br₂ ⇌ NOBr₂ (fast) followed by NOBr₂ + NO → 2NOBr (slow). Show that the reaction is second order in NO.

Solution: Slow step: rate = k₂[NOBr₂][NO]. From the fast equilibrium, [NOBr₂] = K[NO][Br₂]. Substituting, rate = k₂K[NO]²[Br₂]. Order in NO = 2, in Br₂ = 1, overall 3.

Worked example 3.8: For 2A → 3B, the rate laws are written as −d[A]/dt = k₁[A]² and d[B]/dt = k₂[A]². Relate k₁ and k₂.

Solution: Rate of reaction = (1/2)(−d[A]/dt) = (1/3)(d[B]/dt). So k₁/2 = k₂/3, which gives 3k₁ = 2k₂.

Quick revision

  • Rate = k[A]ˣ[B]ʸ; x and y come from experiment, not from coefficients.

  • Order = x + y; can be 0, integer, fraction or negative.

  • Units of k = (mol L⁻¹)^(1−n) s⁻¹. Zero: mol L⁻¹ s⁻¹; first: s⁻¹; second: L mol⁻¹ s⁻¹.

  • Initial rates: concentration × p, rate × q, order = log q/log p.

  • Molecularity: elementary steps only, whole number 1, 2 or 3.

  • The slowest step fixes the rate law; intermediates are replaced using a fast pre-equilibrium.

NEET traps

  • Writing the rate law from the balanced equation of a complex reaction.

  • Calling molecularity zero or fractional. Only order can be.

  • Putting a catalyst or an intermediate the wrong way round. A catalyst appears first as a reactant and is given back; an intermediate is made first and then used.

  • Forgetting that k for a rate written in terms of one species differs from the rate-of-reaction k by the coefficient.

  • Using concentrations from an experiment where two things changed at once to find one order.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The order of a reaction is (a) the sum of the powers of concentration terms in the experimental rate law (b) the sum of stoichiometric coefficients of reactants (c) the number of molecules that collide in the slow step (d) always a whole number

2. Molecularity is defined for (a) overall complex reactions (b) elementary steps (c) zero-order reactions only (d) any reaction from its balanced equation

3. The unit of the rate constant of a first-order reaction is (a) mol L⁻¹ s⁻¹ (b) L mol⁻¹ s⁻¹ (c) s⁻¹ (d) L² mol⁻² s⁻¹

4. Which of these can never be zero or a fraction? (a) Order of a reaction (b) Order with respect to one reactant (c) Exponent in a rate law (d) Molecularity of an elementary step

5. The rate-determining step of a mechanism is the (a) fastest step (b) first step in every case (c) slowest step (d) last step in every case

6. The unit of the rate constant of a second-order reaction is (a) L mol⁻¹ s⁻¹ (b) s⁻¹ (c) mol L⁻¹ s⁻¹ (d) mol² L⁻² s⁻¹

7. Termolecular elementary steps are uncommon because (a) they are always endothermic (b) a simultaneous effective collision of three particles is unlikely (c) they need a catalyst (d) they have zero activation energy

8. For rate = k[A]^½[B], the overall order is (a) 1 (b) 2 (c) 0.5 (d) 1.5

9. The rate law of a reaction is found (a) by experiment (b) from the balanced equation (c) from ΔH of the reaction (d) from the equilibrium constant

10. The unit of the rate constant of a zero-order reaction is (a) s⁻¹ (b) L mol⁻¹ s⁻¹ (c) mol L⁻¹ s⁻¹ (d) mol⁻¹ L⁻¹ s

Level 2: NEET standard

11. A rate constant is 4.2 × 10⁻⁵ L mol⁻¹ s⁻¹. The order of the reaction is (a) 0 (b) 1 (c) 2 (d) 3

12. Rate = k[A]²[B]. If [A] is tripled and [B] is doubled, the rate becomes (a) 18 times (b) 6 times (c) 12 times (d) 36 times

13. When [A] goes from 0.05 M to 0.15 M with [B] fixed, the initial rate goes from 1.2 × 10⁻³ to 1.08 × 10⁻² M s⁻¹. When [B] is doubled with [A] fixed, the rate does not change. The rate law is (a) k[A][B] (b) k[A]² (c) k[A]²[B] (d) k[B]²

14. Doubling the concentration of the only reactant makes the rate 8 times. The order is (a) 2 (b) 4 (c) 8 (d) 3

15. For a reaction of order 3/2, the unit of k (concentration in mol L⁻¹, time in s) is (a) mol^½ L^−½ s⁻¹ (b) L^½ mol^−½ s⁻¹ (c) L mol⁻¹ s⁻¹ (d) mol^(3/2) L^(−3/2) s⁻¹

16. A mechanism is A + B → C (slow) followed by C + B → D (fast). The rate law is (a) k[A][B]² (b) k[C][B] (c) k[A][B] (d) k[A]²[B]

17. In the mechanism H₂O₂ + I⁻ → H₂O + IO⁻ (slow), H₂O₂ + IO⁻ → H₂O + I⁻ + O₂ (fast), the catalyst is (a) I⁻ (b) IO⁻ (c) H₂O (d) O₂

18. Making [A] four times larger only doubles the rate. The order in A is (a) 2 (b) 0.5 (c) 4 (d) 0.25

19. For a second-order gas reaction followed by pressure in atm and time in s, the unit of k is (a) atm s⁻¹ (b) s⁻¹ (c) atm⁻² s⁻¹ (d) atm⁻¹ s⁻¹

20. For 2NO + O₂ → 2NO₂, rate = k[NO]²[O₂]. Which statement is correct? (a) The order is 3, and if this is one elementary step its molecularity is also 3 (b) The order is 2, since O₂ is a gas (c) The order cannot be read from this rate law (d) k has units L mol⁻¹ s⁻¹

21. A mechanism is A₂ ⇌ 2A (fast) followed by A + B → P (slow). The overall order is (a) 2 (b) 1 (c) 1.5 (d) 3

22. For CH₃CHO → CH₄ + CO, rate = k[CH₃CHO]^(3/2). If [CH₃CHO] is made 4 times, the rate becomes (a) 4 times (b) 6 times (c) 16 times (d) 8 times

Level 3: Challenge

23. For 2A + B → P: Exp 1, [A] = 0.10 M, [B] = 0.20 M, rate = 3.0 × 10⁻⁴ M s⁻¹; Exp 2, [A] = 0.30 M, [B] = 0.20 M, rate = 9.0 × 10⁻⁴ M s⁻¹; Exp 3, [A] = 0.10 M, [B] = 0.40 M, rate = 1.2 × 10⁻³ M s⁻¹. The rate constant is (a) 7.5 × 10⁻² L² mol⁻² s⁻¹ (b) 1.5 × 10⁻² L mol⁻¹ s⁻¹ (c) 7.5 × 10⁻³ L² mol⁻² s⁻¹ (d) 3.75 × 10⁻¹ L² mol⁻² s⁻¹

24. For the reaction in Q23, the rate when [A] = 0.20 M and [B] = 0.10 M is (a) 3.0 × 10⁻⁴ M s⁻¹ (b) 1.5 × 10⁻⁴ M s⁻¹ (c) 6.0 × 10⁻⁴ M s⁻¹ (d) 7.5 × 10⁻⁵ M s⁻¹

25. For 2A → 3B, −d[A]/dt = k₁[A]² and d[B]/dt = k₂[A]². Then (a) k₁ = k₂ (b) 2k₁ = 3k₂ (c) 3k₁ = 2k₂ (d) k₁ = 3k₂

26. A second-order rate constant is 0.50 L mol⁻¹ s⁻¹. In cm³ mol⁻¹ min⁻¹ it is (a) 30 (b) 8.3 × 10⁻³ (c) 500 (d) 3.0 × 10⁴

27. Doubling [A] (with [B] fixed) makes the rate 4 times. Doubling [B] (with [A] fixed) halves the rate. The overall order is (a) 3 (b) 2 (c) 1 (d) 0

28. For 2NO + Br₂ → 2NOBr, the mechanism is NO + Br₂ ⇌ NOBr₂ (fast) then NOBr₂ + NO → 2NOBr (slow). The order with respect to NO is (a) 1 (b) 2 (c) 3 (d) 0

29. Assertion (A): The order of a reaction can be zero or fractional. Reason (R): Order is the number of molecules that take part in the rate-determining step. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The rate law of any reaction can be written from its balanced overall equation. Statement II: For an elementary step, the order equals the molecularity. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1aDefinition of order
2bMolecularity belongs to single steps
3c(mol L⁻¹)⁰ s⁻¹
4dParticles colliding: 1, 2 or 3
5cSlowest step limits the rate
6a(mol L⁻¹)⁻¹ s⁻¹
7bThree-body collisions are rare
8d½ + 1
9aRate laws are experimental
10cSame units as rate
11cL mol⁻¹ s⁻¹ means n = 2
12a3² × 2 = 18
13b3× conc gives 9× rate; B order 0
14d2³ = 8
15b(mol L⁻¹)^(−½) s⁻¹
16cSlow step A + B
17aI⁻ used then regenerated
18b4^½ = 2
19datm^(1−n) s⁻¹ with n = 2
20a2 + 1 = 3; elementary, so equal
21c[A] = K^½[A₂]^½, rate ∝ [A₂]^½[B]
22d4^1.5 = 8
23aFirst in A, second in B; 3.0 × 10⁻⁴/(0.10 × 0.04)
24b0.075 × 0.20 × 0.010
25ck₁/2 = k₂/3
26d0.50 × 1000 × 60
27c2 + (−1) = 1
28bRate = k₂K[NO]²[Br₂]
29cOrder is experimental, not a molecule count
30dI false for complex reactions

Chapter 3 revision sheet

One-page summary

  • Rate law: rate = k[A]^x[B]^y, where x and y are found by experiment, not from the balanced equation.

  • Order with respect to A is x; overall order is x + y. Order can be 0, a whole number or a fraction.

  • Rate constant k is the rate when every concentration is 1 M; it depends on temperature and catalyst, not on concentration.

  • Units of k for order n: (mol L⁻¹)^(1−n) s⁻¹.

  • An elementary reaction happens in one step; a complex reaction is a sequence of elementary steps (the mechanism).

  • Molecularity = number of species that collide in one elementary step: 1, 2 or rarely 3. It is never zero or fractional.

  • For an elementary step, order equals molecularity and the rate law follows the coefficients.

  • The slowest step is the rate-determining step; the rate law of the overall reaction follows it.

  • An intermediate is formed in one step and used in a later one; it never appears in the final rate law. Remove it using a fast pre-equilibrium.

  • Pseudo-first-order: one reactant (often water) is in large excess, so its concentration stays almost constant and joins k.

  • Examples: acid hydrolysis of ethyl acetate and inversion of cane sugar.

  • Initial-rate method: change one concentration at a time; rate ratio = (concentration ratio)^order.

  • A plot of log(rate) against log[A] is a straight line with slope = order and intercept = log k.

Rate=k[A]x[B]y,unit of k=(mol L−1)1−n s−1\text{Rate} = k[A]^x[B]^y, \qquad \text{unit of } k = (\text{mol L}^{-1})^{1-n}\,\text{s}^{-1}

Must-remember table

Order nRate law exampleUnit of k
0rate = kmol L⁻¹ s⁻¹
1/2rate = k[A]^(1/2)mol^(1/2) L^(−1/2) s⁻¹
1rate = k[A]s⁻¹
3/2rate = k[A][B]^(1/2)mol^(−1/2) L^(1/2) s⁻¹
2rate = k[A]² or k[A][B]L mol⁻¹ s⁻¹
3rate = k[A]²[B]L² mol⁻² s⁻¹

Memory aids

  • "Order is Observed, Molecularity is Mechanism": order comes from experiments; molecularity is counted in one step of the mechanism.

  • "Slowest Step Sets the Speed": the rate-determining step fixes the rate law, like the slowest auto-rickshaw at a narrow lane fixes the traffic speed.

  • "L to the n minus 1": the power of L in the unit of k equals n − 1; s⁻¹ alone means n = 1.

  • "Pseudo means Plenty": pseudo-first-order needs plenty (large excess) of one reactant.

Concept connections

  • Chemistry Book 6: Equilibrium: the fast pre-equilibrium step uses an equilibrium constant to replace an intermediate's concentration.

  • Chemistry Book 17: Organic Compounds Containing Oxygen: ester hydrolysis, a classic pseudo-first-order reaction, is studied there as a reaction of esters.

  • Chemistry Book 19: Biomolecules: inversion of cane sugar (sucrose → glucose + fructose) links to carbohydrate chemistry.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Concentration is in mol L⁻¹ and time in s. Match the order (List I) with the unit of k (List II).

List I:

  • A. Zero order

  • B. First order

  • C. Second order

  • D. Third order

List II:

  • i. s⁻¹

  • ii. L² mol⁻² s⁻¹

  • iii. mol L⁻¹ s⁻¹

  • iv. L mol⁻¹ s⁻¹

(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iv, B-i, C-iii, D-ii

32. Match the reaction or rate law (List I) with its overall order (List II).

List I:

  • A. H₂ + Br₂ → 2HBr, rate = k[H₂][Br₂]^(1/2)

  • B. 2NO + O₂ → 2NO₂, rate = k[NO]²[O₂]

  • C. Decomposition of NH₃ on hot platinum at high pressure

  • D. Acid hydrolysis of ethyl acetate in a large excess of water

List II:

  • i. 0

  • ii. 1

  • iii. 1.5

  • iv. 3

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-iv, C-i, D-iii

33. Match the term (List I) with its description (List II).

List I:

  • A. Order

  • B. Molecularity

  • C. Rate-determining step

  • D. Reaction intermediate

List II:

  • i. Formed in one step, used up in a later step, absent from the overall equation

  • ii. Found by experiment; can be zero or a fraction

  • iii. The slowest step of a mechanism

  • iv. Number of species colliding in one elementary step

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-ii, B-i, C-iv, D-iii

34. Match the mechanism (List I) with the rate law it predicts (List II).

List I:

  • A. 2NO + O₂ → 2NO₂ as a single elementary step

  • B. NO₂ + NO₂ → NO₃ + NO (slow); NO₃ + CO → NO₂ + CO₂ (fast)

  • C. H₂O₂ + I⁻ → H₂O + IO⁻ (slow); H₂O₂ + IO⁻ → H₂O + I⁻ + O₂ (fast)

  • D. Cl₂ ⇌ 2Cl (fast); Cl + CHCl₃ → HCl + CCl₃ (slow); CCl₃ + Cl → CCl₄ (fast)

List II:

  • i. rate = k[H₂O₂][I⁻]

  • ii. rate = k[NO]²[O₂]

  • iii. rate = k[CHCl₃][Cl₂]^(1/2)

  • iv. rate = k[NO₂]²

(a) A-ii, B-i, C-iv, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-ii, B-iv, C-i, D-iii

35. How many of the following statements are correct?

  • A. The order of a reaction can be zero.

  • B. Molecularity can be a fraction.

  • C. For an elementary reaction, order equals molecularity.

  • D. For a complex reaction, order is found only by experiment.

  • E. Molecularity of a complex reaction as a whole has no meaning; it applies to each step.

  • F. Overall order always equals the sum of the coefficients in the balanced equation.

(a) Two (b) Three (c) Five (d) Four

36. Choose the correct set of statements about pseudo-first-order reactions.

  • A. Acid hydrolysis of ethyl acetate in a large excess of water is an example.

  • B. Inversion of cane sugar in acidic water is an example.

  • C. The molecularity of the reaction becomes one.

  • D. The concentration of the excess reactant stays almost constant and is absorbed into k.

(a) A and B only (b) A, B and D only (c) B, C and D only (d) A, C and D only

37. For a reaction with rate = k[A][B]², choose the correct set of statements.

  • A. The overall order is 3.

  • B. Doubling [B] alone makes the rate 4 times.

  • C. The unit of k is L² mol⁻² s⁻¹.

  • D. The reaction must be an elementary termolecular step.

(a) A and B only (b) A, B and D only (c) A, B and C only (d) A, B, C and D

38. For 2NO + Br₂ → 2NOBr, a proposed mechanism is: Step 1: NO + Br₂ ⇌ NOBr₂ (fast); Step 2: NOBr₂ + NO → 2NOBr (slow). Choose the correct set of statements.

  • A. NOBr₂ is an intermediate.

  • B. The predicted rate law is rate = k[NO]²[Br₂].

  • C. The molecularity of the slow step is 2.

  • D. The overall order is 2.

(a) A, B and C only (b) A and D only (c) B, C and D only (d) A, B, C and D

39. Initial rates for A + B → products at 300 K:

Run[A] (M)[B] (M)Initial rate (M s⁻¹)
10.100.102.0 × 10⁻³
20.200.108.0 × 10⁻³
30.100.204.0 × 10⁻³

The rate law and the rate constant are (a) rate = k[A][B]², k = 2.0 L² mol⁻² s⁻¹ (b) rate = k[A]²[B], k = 0.2 L² mol⁻² s⁻¹ (c) rate = k[A]²[B], k = 2.0 L² mol⁻² s⁻¹ (d) rate = k[A][B], k = 0.2 L mol⁻¹ s⁻¹

40. Using the data of Q39, the initial rate when [A] = [B] = 0.30 M is (a) 5.4 × 10⁻² M s⁻¹ (b) 1.8 × 10⁻² M s⁻¹ (c) 5.4 × 10⁻³ M s⁻¹ (d) 1.6 × 10⁻¹ M s⁻¹

41. For A → products, a graph of log(rate) on the y-axis against log[A] on the x-axis is a straight line of slope 2 that cuts the y-axis at −3 (rate in M s⁻¹, [A] in M). The order and k are (a) 1 and 1.0 × 10⁻³ s⁻¹ (b) 2 and 3 L mol⁻¹ s⁻¹ (c) 3 and 1.0 × 10⁻² L² mol⁻² s⁻¹ (d) 2 and 1.0 × 10⁻³ L mol⁻¹ s⁻¹

Case for Q42–43: A student studies 2A + B → C at 25 °C by the initial-rate method. Tripling [A] with [B] fixed makes the initial rate 9 times. Doubling [B] with [A] fixed leaves the initial rate unchanged.

42. The rate law is (a) rate = k[A]²[B] (b) rate = k[A]² (c) rate = k[A][B] (d) rate = k[A]³

43. Which conclusion is correct? (a) The reaction is elementary because the order of A equals its coefficient (b) B does not take part in the reaction at all (c) The molecularity of the overall reaction is 3 (d) B enters the mechanism only after the rate-determining step

44. For A → products, raising [A] from 0.10 M to 0.40 M raises the rate from 2.0 × 10⁻⁴ to 4.0 × 10⁻⁴ M s⁻¹. The order and the unit of k are (a) 1/2 and mol^(1/2) L^(−1/2) s⁻¹ (b) 2 and L mol⁻¹ s⁻¹ (c) 1/2 and mol^(−1/2) L^(1/2) s⁻¹ (d) 1 and s⁻¹

45. For 2A + B → products, rate = k[A][B]. The reaction starts with [A] = 0.20 M and [B] = 0.10 M. When half of B has reacted, the rate is what fraction of the initial rate? (a) 1/2 (b) 1/8 (c) 1/4 (d) 3/8

Level 4 answer key

QAnsReason
31aUnit of k = (mol L⁻¹)^(1−n) s⁻¹
32c1 + 1/2 = 1.5; 2 + 1 = 3; NH₃ on Pt at high pressure is zero order; ester hydrolysis is pseudo-first order
33bOrder is experimental, molecularity counts colliding species, slowest step decides rate
34dRate law follows the slow step; in D, [Cl] = K^(1/2)[Cl₂]^(1/2) from the fast equilibrium
35dA, C, D and E are true; molecularity is never fractional; order need not match coefficients
36bMolecularity stays two; only the apparent order becomes one
37c1 + 2 = 3; 2² = 4; (mol L⁻¹)⁻² s⁻¹; a third-order rate law need not come from one step
38aRate = k₂K[NO]²[Br₂] gives overall order 3, not 2
39cRuns 1→2: 4× for 2×, order 2 in A; runs 1→3: 2× for 2×, order 1 in B; k = 2.0 × 10⁻³/(0.01 × 0.10) = 2.0
40a2.0 × (0.30)² × 0.30 = 0.054 M s⁻¹
41dlog rate = log k + n log[A]: slope n = 2, log k = −3
42b3ⁿ = 9 gives n = 2 for A; zero order in B
43dZero order in B means B is not in the slow step; it reacts in a later fast step
44a4ⁿ = 2 gives n = 1/2; (mol L⁻¹)^(1/2) s⁻¹
45cB falls by 0.05 M, A by 0.10 M: (0.10 × 0.05)/(0.20 × 0.10) = 1/4
24 min left
‹
›