Chapter 9 of 11 · 23 min read

Chapter 7: Collision Theory and Catalysis

Collision theory says a bimolecular gas reaction happens only when molecules collide with enough energy and the right orientation; the rate is the collision frequency times the fraction of collisions that meet both conditions. A catalyst speeds this up by offering a lower energy barrier, without changing the start and end energies.

What you will learn

  • The two conditions for an effective collision.

  • The collision-theory rate expression and the steric factor (no derivation).

  • How to read an energy profile: Ea(forward), Ea(backward), ΔH, activated complex.

  • How a catalyst changes the energy profile.

  • Homogeneous and heterogeneous catalysts and their key features.

7.1 The idea of collision theory

Collision theory was developed by Max Trautz and William Lewis around 1916–1918. It pictures reacting molecules as hard spheres. A reaction can happen only when two of them collide.

The number of collisions per second per unit volume is the collision frequency, Z. For two gases A and B it is written Z_AB. In a gas at room temperature Z is enormous, around 10³⁰ collisions per litre per second or more. If every collision gave product, every gas reaction would be over in a split second. They are not, so most collisions must fail.

7.2 Effective collisions: energy and orientation

A collision that produces product is an effective collision. It needs two things.

  1. Enough energy. The colliding molecules must together have at least the threshold energy. The fraction of collisions that do is e^(−Ea/RT).

  2. Proper orientation. The molecules must meet with the right parts facing each other, so the right bonds can break and form.

Orientation example: CH₃Br + OH⁻ → CH₃OH + Br⁻. The OH⁻ must strike the carbon atom from the side opposite to Br. If it hits the Br end or an H atom, the molecules just bounce apart. Like a key, which turns a lock only when inserted the right way up, a molecule must meet its partner in the right direction.

7.3 The collision-theory rate expression (no derivation)

Combining the two factors for a bimolecular gaseous reaction A + B → products:

Rate=ZAB e−Ea/RT\text{Rate} = Z_{AB}\,e^{-E_a/RT}

This treats every energetic collision as effective. To allow for orientation, a probability or steric factor P is added:

Rate=P ZAB e−Ea/RT\text{Rate} = P\,Z_{AB}\,e^{-E_a/RT}

Comparing with the Arrhenius equation k = A e^(−Ea/RT), the collision theory interprets A as P × Z (per unit concentrations). P lies between 0 and 1. It is close to 1 for simple atoms and much smaller for large, complex molecules.

Limitations: collision theory treats molecules as hard spheres and ignores their structure. P is a correction factor added afterwards rather than calculated from first principles. It works best for simple gas-phase bimolecular reactions.

7.4 Temperature in the collision picture

Collision frequency grows with the average speed, which goes as √T. From 300 K to 310 K, √(310/300) = 1.017, so collisions rise by under 2%. The fraction with energy above Ea, e^(−Ea/RT), often doubles in the same range. So the steep rise of rate with temperature is an energy effect, not a collision-count effect.

7.5 Energy profiles

An energy profile plots potential energy along the reaction path, from reactants, over the activated complex, to products.

  • Ea(forward) = energy of activated complex − energy of reactants.

  • Ea(backward) = energy of activated complex − energy of products.

  • ΔH = energy of products − energy of reactants = Ea(forward) − Ea(backward).

TypeProducts vs reactantsΔHEa(f) vs Ea(b)
ExothermicProducts lowerNegativeEa(f) smaller than Ea(b)
EndothermicProducts higherPositiveEa(f) larger than Ea(b); Ea(f) at least ΔH

For an endothermic reaction, Ea(forward) can never be smaller than ΔH, because the peak must be at least as high as the products.

Figure 7.1 · Energy profile of an exothermic reaction with and without a catalyst
Figure 7.1 · Energy profile of an exothermic reaction with and without a catalyst

The catalysed path climbs a lower hill (Ea′ smaller than Ea), so Ea(backward) drops by the same amount, while the reactant and product levels, and so ΔH, do not change.

7.6 How a catalyst works

A catalyst opens a new route with a lower peak. Usually it forms a short-lived intermediate with a reactant, and that intermediate breaks down to products, giving the catalyst back. This is the intermediate compound idea:

A+C→ACthenAC+B→AB+C\mathrm{A + C \rightarrow AC} \quad\text{then}\quad \mathrm{AC + B \rightarrow AB + C}

On the energy profile:

  • The reactant and product levels do not move, so ΔH is unchanged.

  • The peak is lower, so Ea(forward) and Ea(backward) both drop by the same amount.

  • k(forward) and k(backward) both rise by the same factor, so K is unchanged; equilibrium is reached sooner.

  • ΔG is unchanged, so a catalyst cannot make a non-spontaneous reaction go.

7.7 Types of catalysis

TypeCatalyst phaseExample
HomogeneousSame phase as reactantsH⁺ in acid hydrolysis of esters; NO in the lead chamber process for SO₂ → SO₃; I⁻ in H₂O₂ decomposition in solution
HeterogeneousDifferent phase (usually a solid with gases or liquids)Fe in the Haber process; Pt in the Ostwald process; V₂O₅ in the contact process; Ni in hydrogenation of vegetable oils
Enzyme (biocatalysis)Proteins in living cellsInvertase (sucrose → glucose + fructose); urease (urea → NH₃ + CO₂)

Other features of catalysts that NEET tests:

  • A small amount is usually enough.

  • A catalyst is often specific: one catalyst helps one reaction, not all.

  • The catalyst is unchanged in mass and chemical identity at the end, though its physical form (lumps to powder) may change.

  • A promoter boosts a catalyst (molybdenum for iron in the Haber process). A poison blocks it (CO or H₂S on iron).

Worked example 7.1: In a gas mixture, Z_AB = 2.0 × 10³⁴ collisions L⁻¹ s⁻¹ and a fraction 1.0 × 10⁻¹⁰ of collisions have enough energy. Taking P = 1, find the rate in mol L⁻¹ s⁻¹.

Solution: Effective collisions = 2.0 × 10³⁴ × 1.0 × 10⁻¹⁰ = 2.0 × 10²⁴ L⁻¹ s⁻¹. Rate = 2.0 × 10²⁴/6.022 × 10²³ = 3.3 mol L⁻¹ s⁻¹.

Worked example 7.2: For a bimolecular gas reaction, the measured Arrhenius factor is 2.0 × 10⁹ L mol⁻¹ s⁻¹ while collision theory predicts 8.0 × 10¹⁰ L mol⁻¹ s⁻¹. Find P and explain.

Solution: P = 2.0 × 10⁹/8.0 × 10¹⁰ = 0.025. Only 1 in 40 energetic collisions has a suitable orientation.

Worked example 7.3: On an energy profile, reactants are at 50 kJ mol⁻¹, the activated complex at 150 kJ mol⁻¹ and products at 20 kJ mol⁻¹. Find Ea(f), Ea(b) and ΔH.

Solution: Ea(f) = 150 − 50 = 100 kJ mol⁻¹. Ea(b) = 150 − 20 = 130 kJ mol⁻¹. ΔH = 20 − 50 = −30 kJ mol⁻¹ (also 100 − 130). The reaction is exothermic.

Worked example 7.4: A catalyst lowers the peak in Worked example 7.3 to 110 kJ mol⁻¹. Find the new Ea(f), Ea(b) and ΔH.

Solution: Ea′(f) = 110 − 50 = 60 kJ mol⁻¹. Ea′(b) = 110 − 20 = 90 kJ mol⁻¹. Both fell by 40 kJ mol⁻¹. ΔH stays −30 kJ mol⁻¹.

Worked example 7.5: An endothermic reaction has ΔH = +35 kJ mol⁻¹ and Ea(f) = 85 kJ mol⁻¹. Find Ea(b).

Solution: Ea(b) = Ea(f) − ΔH = 85 − 35 = 50 kJ mol⁻¹.

Worked example 7.6: An enzyme lowers Ea of a reaction from 100 to 75 kJ mol⁻¹ at body temperature, 310 K. Assuming A is unchanged, by what factor does the rate rise?

Solution: Ratio = e^(25 000/(8.314 × 310)) = e^9.70 ≈ 1.6 × 10⁴. A 25% drop in Ea speeds the reaction about sixteen thousand times.

Worked example 7.7: By how much must a catalyst lower Ea to make a reaction 10⁶ times faster at 300 K (A unchanged)?

Solution: log(10⁶) = 6 = ΔEa/(2.303 × 8.314 × 300). ΔEa = 6 × 5744 = 34 500 J mol⁻¹ ≈ 34.5 kJ mol⁻¹.

Quick revision

  • Effective collision = enough energy (≥ threshold) + proper orientation.

  • Rate = P Z_AB e^(−Ea/RT); P is the steric factor, between 0 and 1.

  • Arrhenius A corresponds to P × Z in collision theory.

  • Raising T barely changes collision frequency (√T) but greatly increases the fraction above Ea.

  • Ea(f) − Ea(b) = ΔH. Endothermic: Ea(f) ≥ ΔH.

  • A catalyst lowers the peak: Ea(f) and Ea(b) fall equally; ΔH, ΔG and K unchanged.

  • Homogeneous: same phase. Heterogeneous: different phase.

NEET traps

  • Saying every collision with enough energy is effective. Orientation also matters.

  • Saying a catalyst lowers only Ea(forward). It lowers both by the same amount.

  • Getting ΔH from Ea values with the wrong sign: ΔH = Ea(f) − Ea(b), not the reverse.

  • Explaining the temperature effect by more collisions. The main cause is more energetic collisions.

  • Calling a catalyst "not involved" in the reaction. It takes part in the steps and is given back.

Practice MCQs: Chapter 7

Level 1: Concept check

1. According to collision theory, reacting molecules must (a) simply collide (b) collide with sufficient energy and proper orientation (c) have zero activation energy (d) be ions

2. Effective collisions are those that (a) lead to formation of products (b) occur between any two molecules (c) occur with the walls of the vessel (d) are perfectly elastic

3. Collision frequency is (a) the energy carried by each collision (b) the fraction of collisions that are effective (c) the number of collisions per second per unit volume (d) the time between two collisions of one molecule

4. In Rate = P Z_AB e^(−Ea/RT), the factor P stands for (a) pressure (b) the number of products (c) the amount of catalyst (d) the probability or steric factor for orientation

5. In an energy profile, the activated complex sits at (a) the top of the energy barrier (b) the reactant level (c) the product level (d) the lowest point of the curve

6. For an exothermic reaction, (a) Ea(backward) = Ea(forward) (b) Ea(backward) is less than Ea(forward) (c) Ea(backward) is greater than Ea(forward) (d) Ea(backward) = 0

7. On an energy profile, a catalyst (a) raises the product level (b) lowers the peak only (c) lowers the reactant level (d) changes ΔH

8. Which is an example of heterogeneous catalysis? (a) Iron in the Haber process (b) NO in the lead chamber process (c) H⁺ in acid hydrolysis of an ester (d) I⁻ in decomposition of H₂O₂ in solution

9. Which is an example of homogeneous catalysis? (a) Pt in the Ostwald process (b) Ni in hydrogenation of oils (c) V₂O₅ in the contact process (d) H⁺ in acid hydrolysis of an ester

10. Collision theory treats molecules as (a) point charges (b) hard spheres (c) waves (d) springs

Level 2: NEET standard

11. In an energy profile, reactants are at 40 kJ mol⁻¹, the peak at 140 kJ mol⁻¹ and products at 10 kJ mol⁻¹. Ea(backward) is (a) 100 kJ mol⁻¹ (b) 130 kJ mol⁻¹ (c) 30 kJ mol⁻¹ (d) 140 kJ mol⁻¹

12. In Q11, a catalyst lowers the peak to 100 kJ mol⁻¹. The new ΔH is (a) −70 kJ mol⁻¹ (b) +30 kJ mol⁻¹ (c) −30 kJ mol⁻¹ (d) −10 kJ mol⁻¹

13. An endothermic reaction has ΔH = +50 kJ mol⁻¹ and Ea(backward) = 30 kJ mol⁻¹. Ea(forward) is (a) 20 kJ mol⁻¹ (b) 50 kJ mol⁻¹ (c) 30 kJ mol⁻¹ (d) 80 kJ mol⁻¹

14. Z_AB = 6.0 × 10³⁰ collisions L⁻¹ s⁻¹ and a fraction 1.0 × 10⁻⁸ have enough energy. With P = 1, the rate is about (a) 0.10 mol L⁻¹ s⁻¹ (b) 6.0 × 10²² mol L⁻¹ s⁻¹ (c) 1.0 mol L⁻¹ s⁻¹ (d) 0.010 mol L⁻¹ s⁻¹

15. The measured Arrhenius factor of a gas reaction is 4.0 × 10⁸ L mol⁻¹ s⁻¹; collision theory predicts 1.0 × 10¹⁰ L mol⁻¹ s⁻¹. The steric factor P is (a) 25 (b) 0.4 (c) 0.04 (d) 4.0 × 10¹⁸

16. Some collisions with energy above the threshold still do not give products, because (a) no catalyst is present (b) the molecules may collide with improper orientation (c) the products are unstable (d) energy is lost as light

17. At 310 K, a catalyst lowers Ea from 100 to 75 kJ mol⁻¹ with A unchanged. The rate rises by a factor of about (a) 25 (b) 1.3 (c) 1.6 × 10⁴ (d) 1.6 × 10⁸

18. For a catalysed reaction compared with the uncatalysed one, (a) only Ea(forward) is lowered (b) only Ea(backward) is lowered (c) Ea(forward) is lowered and Ea(backward) is raised (d) Ea(forward) and Ea(backward) are lowered by the same amount

19. For CH₃Br + OH⁻ → CH₃OH + Br⁻, an effective collision needs OH⁻ to approach (a) the bromine atom (b) the carbon atom from the side opposite to Br (c) a hydrogen atom (d) from any direction

20. An endothermic reaction has ΔH = +40 kJ mol⁻¹. Which value cannot be its Ea(forward)? (a) 35 kJ mol⁻¹ (b) 45 kJ mol⁻¹ (c) 60 kJ mol⁻¹ (d) 90 kJ mol⁻¹

21. For a bimolecular gaseous reaction, simple collision theory (ignoring orientation) gives the rate as (a) Z_AB e^(Ea/RT) (b) Z_AB/Ea (c) Z_AB e^(−Ea/RT) (d) e^(−Z_AB/RT)

22. The threshold energy of a reaction is 150 kJ mol⁻¹ and the average energy of the reactant molecules is 40 kJ mol⁻¹. Ea is (a) 110 kJ mol⁻¹ (b) 190 kJ mol⁻¹ (c) 150 kJ mol⁻¹ (d) 40 kJ mol⁻¹

Level 3: Challenge

23. An exothermic reaction has ΔH = −60 kJ mol⁻¹ and Ea(f) = 40 kJ mol⁻¹. A catalyst lowers Ea(f) by 25%. The new Ea(backward) is (a) 100 kJ mol⁻¹ (b) 75 kJ mol⁻¹ (c) 90 kJ mol⁻¹ (d) 70 kJ mol⁻¹

24. An enzyme makes a reaction 10⁶ times faster at 300 K without changing A. It lowers Ea by about (a) 34.5 kJ mol⁻¹ (b) 14.9 kJ mol⁻¹ (c) 6.0 kJ mol⁻¹ (d) 79.4 kJ mol⁻¹

25. Raising the temperature of a gas from 300 K to 310 K increases its collision frequency by only about (a) 10% (b) 1.7% (c) 50% (d) 100%

26. For a bimolecular gas reaction, the measured A is far smaller than the collision frequency factor. This means (a) Ea is negative (b) the temperature was measured wrongly (c) only a small fraction of collisions have a suitable orientation (d) the reaction is zero order

27. A two-step reaction has an energy profile with two peaks. From the reactants, the first peak is 80 kJ mol⁻¹ high; from the intermediate, the second peak is 30 kJ mol⁻¹ high, and the second peak lies below the first. Which is correct? (a) Step 2 is rate-determining; the intermediate sits at a peak (b) Step 1 is rate-determining; the intermediate sits in the valley between the peaks (c) Step 1 is rate-determining; the intermediate sits at the first peak (d) Both steps are equally slow

28. A catalyst increases k(forward) 1000 times at 300 K without changing A. The decrease in Ea is about (a) 3.0 kJ mol⁻¹ (b) 7.5 kJ mol⁻¹ (c) 57.4 kJ mol⁻¹ (d) 17.2 kJ mol⁻¹

29. Assertion (A): Not every collision with energy above the threshold leads to reaction. Reason (R): Colliding molecules must also have a proper orientation. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: A catalyst provides a new path with a lower activation energy for both the forward and backward reactions. Statement II: A catalyst can make a non-spontaneous reaction spontaneous. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bEnergy and orientation both needed
2aDefinition of effective collision
3cCollisions per second per volume
4dSteric (probability) factor
5aPeak of the barrier
6cProducts lie lower
7bStart and end levels fixed
8aSolid Fe, gaseous reactants
9dAll in one solution phase
10bHard-sphere model
11b140 − 10
12c10 − 40, unchanged by catalyst
13dEa(f) = Ea(b) + ΔH = 30 + 50
14a6.0 × 10²²/6.022 × 10²³
15c4.0 × 10⁸/1.0 × 10¹⁰
16bOrientation condition
17ce^(9.70)
18dPeak lowered, ends fixed
19bBackside attack on carbon
20aEa(f) must be at least ΔH
21cZ_AB times Boltzmann factor
22a150 − 40
23cEa′(f) = 30, Ea′(b) = 30 + 60
24a6 × 2.303 × 8.314 × 300
25b√(310/300) = 1.017
26cP much less than 1
27bHigher barrier is slow; intermediate in valley
28d3 × 2.303 × 8.314 × 300
29aOrientation explains A
30cΔG unchanged by a catalyst

Chapter 7 revision sheet

One-page summary

  • Collision theory treats molecules as hard spheres; a reaction happens only when molecules collide.

  • Collision frequency Z (Z_AB for A and B) = number of collisions per second per unit volume.

  • Only effective collisions give products: the molecules need energy at least the threshold energy and the right orientation.

  • Threshold energy = Ea + average energy of the reactant molecules.

  • Fraction of collisions with enough energy = e^(−Ea/RT).

  • Probability (steric) factor P accounts for orientation; P is 1 or less.

  • Rate = P Z_AB e^(−Ea/RT); comparing with Arrhenius, A = P Z_AB.

  • A 10 K rise near room temperature raises Z by under 2% (Z ∝ √T), but can double the rate through the energy fraction.

  • Collision theory works best for simple gas molecules; complex molecules show large orientation effects.

  • A catalyst gives a new path with lower Ea, often through an intermediate with the catalyst, and is regenerated.

  • A catalyst lowers Ea(forward) and Ea(backward) by the same amount, so K, ΔH and ΔG stay the same.

  • A catalyst cannot start a reaction that is thermodynamically not feasible; it only helps equilibrium arrive sooner.

  • Catalysts are specific; a small amount is usually enough.

  • Enzymes are biological catalysts (mostly proteins), highly specific, with an optimum temperature and pH.

  • Homogeneous: catalyst in the same phase (NO in the lead chamber process); heterogeneous: different phase (Fe in the Haber process).

Rate=P ZAB e−Ea/RT,A=P ZAB,Ethreshold=Ea+Eaverage\text{Rate} = P\,Z_{AB}\,e^{-E_a/RT}, \qquad A = P\,Z_{AB}, \qquad E_{\text{threshold}} = E_a + E_{\text{average}}

Must-remember table

PropertyDoes a catalyst change it?
Activation energyYes, lowers it (both directions, by the same amount)
Rate constants k(f) and k(b)Yes, both increase
Time to reach equilibriumYes, shortens it
ΔH, ΔGNo
Equilibrium constant K and yieldNo
Mass and chemical nature of the catalyst at the endNo

Memory aids

  • "Energy plus Orientation = Effective" (E + O = E): both conditions must hold for a collision to give products.

  • "Threshold = Ea on top of Average": threshold energy = Ea + average energy.

  • "PZ e": rate = P × Z × e^(−Ea/RT) — Probability, Z for collisions, exponential for energy.

  • "A catalyst is a guide, not a fuel": it shows a lower path (lower Ea) but adds no energy, so ΔH, ΔG and K stay the same.

Concept connections

  • Physics Book 9: Kinetic Theory of Gases: collision frequency and molecular speeds rise with √T, which explains the small change in Z.

  • Chemistry Book 11: d- and f-Block Elements: transition metals and their compounds (Fe, V₂O₅, Pt, Ni) are the classic catalysts.

  • Chemistry Book 19: Biomolecules: enzymes are proteins whose specific shape gives the right orientation for reaction.

Practice MCQs: Chapter 7, Level 4 (new NEET pattern)

31. Match the term (List I) with its meaning (List II).

List I:

  • A. Collision frequency Z

  • B. Probability (steric) factor P

  • C. Threshold energy

  • D. Effective collision

List II:

  • i. Minimum total energy colliding molecules must have to react

  • ii. A collision with enough energy and correct orientation that forms products

  • iii. Number of collisions per second per unit volume

  • iv. Fraction of collisions with suitable orientation

(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii

32. Match the type of catalysis (List I) with an example (List II).

List I:

  • A. Homogeneous catalysis

  • B. Heterogeneous catalysis

  • C. Enzyme catalysis

  • D. Negative catalysis (inhibition)

List II:

  • i. Invertase converts sucrose into glucose and fructose

  • ii. NO(g) speeds the oxidation of SO₂(g) in the lead chamber process

  • iii. Acetanilide slows the decomposition of H₂O₂

  • iv. Solid iron speeds N₂(g) + 3H₂(g) → 2NH₃(g)

(a) A-ii, B-iv, C-i, D-iii (b) A-iv, B-ii, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-ii, B-iv, C-iii, D-i

33. A positive catalyst is added to a reversible reaction. Match the quantity (List I) with what happens to it (List II).

List I:

  • A. Activation energy

  • B. Rate constant of the forward reaction

  • C. Equilibrium constant

  • D. Equilibrium state

List II:

  • i. Unchanged

  • ii. Increases

  • iii. Decreases

  • iv. Reached in less time

(a) A-ii, B-iii, C-i, D-iv (b) A-iii, B-ii, C-i, D-iv (c) A-iii, B-ii, C-iv, D-i (d) A-i, B-ii, C-iii, D-iv

34. In the collision theory expression rate = P Z_AB e^(−Ea/RT), match List I with List II.

List I:

  • A. Z_AB

  • B. e^(−Ea/RT)

  • C. P

  • D. P Z_AB e^(−Ea/RT)

List II:

  • i. Number of effective collisions per unit volume per second (the rate)

  • ii. Fraction of collisions with enough energy

  • iii. Collision frequency of A with B

  • iv. Orientation (probability) factor

(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-ii, C-iv, D-i (d) A-iii, B-ii, C-i, D-iv

35. How many of the following statements are correct?

  • A. Every collision between reactant molecules forms products.

  • B. Proper orientation is needed for an effective collision.

  • C. Collision theory treats molecules as hard spheres.

  • D. Collision theory works equally well for complex molecules without any correction.

  • E. Raising the temperature increases the fraction of effective collisions.

(a) Two (b) Three (c) Four (d) One

36. Choose the correct set of statements about catalysts.

  • A. A catalyst often forms an intermediate with a reactant and is regenerated later.

  • B. A small amount of catalyst is often enough.

  • C. A catalyst can make a thermodynamically non-feasible reaction occur.

  • D. A catalyst is specific; one that works for one reaction may not work for another.

(a) A, B and D only (b) A and C only (c) B, C and D only (d) A, B, C and D

37. Choose the correct set of statements about enzymes.

  • A. Enzymes are biological catalysts, mostly proteins.

  • B. Enzymes work best at an optimum temperature and pH.

  • C. Enzymes are highly specific.

  • D. Enzymes increase the equilibrium yield of a reaction.

(a) A and D only (b) B, C and D only (c) A, B and C only (d) A, B, C and D

38. For the bimolecular gas reaction H₂ + I₂ → 2HI, choose the correct set of statements based on collision theory.

  • A. The rate is proportional to the number of effective collisions per unit volume per second.

  • B. A probability factor P of 1 or less accounts for orientation.

  • C. Raising the pressure at constant temperature raises the collision frequency.

  • D. The activation energy depends on the concentrations of H₂ and I₂.

(a) A and B only (b) B, C and D only (c) A and D only (d) A, B and C only

39. For a gas reaction A + B → products at a fixed temperature:

QuantityValue
Collision frequency Z_AB6.0 × 10³⁴ collisions L⁻¹ s⁻¹
Fraction of collisions with energy at least Ea1.0 × 10⁻¹²
Probability factor P0.50

Taking Nₐ = 6.0 × 10²³ mol⁻¹, the rate of reaction is (a) 5.0 × 10⁻² mol L⁻¹ s⁻¹ (b) 1.0 × 10⁻¹ mol L⁻¹ s⁻¹ (c) 3.0 × 10²² mol L⁻¹ s⁻¹ (d) 5.0 × 10⁻¹⁴ mol L⁻¹ s⁻¹

40. An energy profile shows the uncatalysed path as one tall hump. The catalysed path, between the same reactant and product levels, shows two smaller humps with a shallow valley between them. Which reading is correct? (a) The catalysed path has a larger ΔH (b) The valley is the activated complex (c) The valley is an intermediate formed with the catalyst, and the higher of the two small humps is below the uncatalysed peak (d) The catalysed path ends at a lower product energy

41. Two gas reactions at the same temperature:

ReactionZ (L⁻¹ s⁻¹)Fraction above EaP
X1.0 × 10³⁴1.0 × 10⁻⁸0.5
Y2.0 × 10³⁴1.0 × 10⁻⁸0.005

The ratio rate(X)/rate(Y) is (a) 0.02 (b) 50 (c) 100 (d) 25

Case for Q42–43: In a model of ammonia synthesis, N₂ + 3H₂ ⇌ 2NH₃ has ΔH = −92 kJ (per 2 mol NH₃). Suppose the forward activation energy is 250 kJ mol⁻¹ without a catalyst, and an iron catalyst lowers it to 150 kJ mol⁻¹.

42. The activation energy of the backward reaction with the iron catalyst is (a) 58 kJ mol⁻¹ (b) 342 kJ mol⁻¹ (c) 150 kJ mol⁻¹ (d) 242 kJ mol⁻¹

43. Which statement about the iron catalyst is correct? (a) It increases the equilibrium yield of NH₃ (b) It lets the system reach equilibrium sooner without changing K (c) It changes ΔH to −192 kJ (d) It speeds up only the forward reaction

44. A reaction has Ea(forward) = 60 kJ mol⁻¹ and Ea(backward) = 100 kJ mol⁻¹. A catalyst lowers Ea(forward) to 45 kJ mol⁻¹. ΔH and the catalysed Ea(backward) are (a) −40 kJ mol⁻¹ and 85 kJ mol⁻¹ (b) +40 kJ mol⁻¹ and 85 kJ mol⁻¹ (c) −40 kJ mol⁻¹ and 100 kJ mol⁻¹ (d) +40 kJ mol⁻¹ and 115 kJ mol⁻¹

45. The rate of a gas reaction doubles when the temperature rises from 300 K to 310 K. Collision frequency is proportional to √T. Over this rise, the collision frequency increases by only about (a) 100% (b) 50% (c) 1.7% (d) 10%

Level 4 answer key

QAnsReason
31dZ counts collisions, P is orientation, threshold is minimum energy, effective collisions give products
32aNO with gases is one phase; solid Fe with gases is two phases; invertase is an enzyme; acetanilide is an inhibitor
33bEa falls, k rises, K is unchanged, equilibrium comes sooner
34cZ_AB = collision frequency, exponential = energy fraction, P = orientation, product = rate
35bB, C and E are true; most collisions fail; complex molecules need the P factor
36aA catalyst cannot change ΔG, so it cannot make a non-feasible reaction go
37cEnzymes, like all catalysts, do not shift equilibrium
38dEa is a property of the reaction path, not of concentration
39a6.0 × 10³⁴ × 10⁻¹² × 0.50 = 3.0 × 10²² L⁻¹ s⁻¹; ÷ 6.0 × 10²³ = 0.050 mol L⁻¹ s⁻¹
40cHumps are activated complexes; the valley is an intermediate; start and end levels (ΔH) are unchanged
41b(1.0 × 0.5)/(2.0 × 0.005) = 50
42dEa(b) = Ea(f) − ΔH = 150 + 92 = 242 kJ mol⁻¹
43bA catalyst speeds both directions alike and leaves K and ΔH unchanged
44aΔH = 60 − 100 = −40; catalyst lowers both by 15: 100 − 15 = 85
45c√(310/300) = 1.017, a rise of about 1.7%; the energy fraction causes the doubling
23 min left
‹
›